You searched for subject:(water absorption band depth)
.
Showing records 1 – 30 of
43095 total matches.
◁ [1] [2] [3] [4] [5] … [1437] ▶
1.
Tian, Jia.
Study Of Water Absorption Band Depth Features With Varied Soil Properties During The Drying Process.
Degree: M.S., Civil and Environmental Engineering, Civil and Environmental Engineering, 2016, Cornell University
URL: http://hdl.handle.net/1813/43643
► Selected spectral reflectance features of soils are examined with respect to their relationship to soil water content. Three soil samples selected to represent a range…
(more)
▼ Selected spectral reflectance features of soils are examined with respect to their relationship to soil
water content. Three soil samples selected to represent a range of particle size distribution, texture, and drying characteristics were monitored as the samples progressed from fully saturated to air dry. Spectral reflectance was collected over the wavelength range 350 nm to 2500 nm, a range in which four major
water absorption bands exist: two in the visible/nearinfrared (VNIR) region centered at 970 nm and 1160 nm, and the other two in the shortwave infrared (SWIR) region centered at 1440 nm and 1930 nm. The
water absorption bands were the focus of this work with the expectation that these features would be the most sensitive indicators of the surface
water content. However, the two
absorption features in VNIR region were not useful for all three soils, so the two
absorption bands in SWIR region became the focus in this study, especially the more sensitive 1930 nm
band. Plots of the changing
absorption band depths in the SWIR region were similar in shape among three soil samples. Three to four approximately linear stages were observed over the whole drying process, however, the transitions between drying stages did not occur at consistent points in the drying process, making it difficult to build a direct relationship between the
absorption features and volumetric
water content that would be independent of the soil type. Although no general, soil-independent relationship could be found between an
absorption feature and volumetric
water content, there were characteristic changes in the
band depth features that were coincident with evaporation stage transitions. Initially, the
depth of the
band centered at 1930 nm increased steadily and slowly with decreasing soil
water content, reached a maximum, and then abruptly decreased marking a distinct change between the early and late, relatively steady drying rate stages. During the late stage, the magnitude of the
band depth decreased sharply with only a small change in
water content. The decrease was coincident with the
water evaporation transition from stage-1 (constant, relatively fast evaporation rate) to stage2 (slower evaporation rate), a transition which is related to the exhaustion of pore
water and the initial loss of adsorbed
water. The two SWIR
water absorption band depths did not decrease with decreasing soil
water content monotonically, which is counterintuitive. In order to understand the process, a simple mathematical model was built which suggested that the pattern of change in the
band depth was related to the near extinction of light at the
band center relative to the
band shoulders. This extinction can be related to a specific
water optical path length. The maximum
absorption band depth at 1930 nm (and the associated
water optical path length) appears to coincide with a trace amount of
water present in the pore spaces for all three soil samples, which is consistent with the transition in drying rates.
Advisors/Committee Members: Philpot,William Douglas (chair), McBride,Murray Brian (committee member), Stewart,Harry Eaton (committee member).
Subjects/Keywords: remote sensing; soil water content; water absorption band depth
…designed to build a relationship between water absorption band depth
and soil water content that… …Repeat the
experiment process
with three different
kinds of soils
Water absorption
band depth… …reflectance
– elapsed time
Plot depth of water
absorption band –
elapsed time
VWC theory
Plot depth… …DEPTH
OF
WATER
ABSORPTION
BANDS
20
4.2
VOLUMETRIC
WATER
CONTENT… …surface soil
water content, and the depth of these water absorption features is hypothesized as…
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share





❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Tian, J. (2016). Study Of Water Absorption Band Depth Features With Varied Soil Properties During The Drying Process. (Masters Thesis). Cornell University. Retrieved from http://hdl.handle.net/1813/43643
Chicago Manual of Style (16th Edition):
Tian, Jia. “Study Of Water Absorption Band Depth Features With Varied Soil Properties During The Drying Process.” 2016. Masters Thesis, Cornell University. Accessed March 01, 2021.
http://hdl.handle.net/1813/43643.
MLA Handbook (7th Edition):
Tian, Jia. “Study Of Water Absorption Band Depth Features With Varied Soil Properties During The Drying Process.” 2016. Web. 01 Mar 2021.
Vancouver:
Tian J. Study Of Water Absorption Band Depth Features With Varied Soil Properties During The Drying Process. [Internet] [Masters thesis]. Cornell University; 2016. [cited 2021 Mar 01].
Available from: http://hdl.handle.net/1813/43643.
Council of Science Editors:
Tian J. Study Of Water Absorption Band Depth Features With Varied Soil Properties During The Drying Process. [Masters Thesis]. Cornell University; 2016. Available from: http://hdl.handle.net/1813/43643

Delft University of Technology
2.
Gao, Ge (author).
Monitoring vegetation dynamics using vegetation optical depth retrieved from L-band single-incidence angle backscatter observations: A field-based study over corn.
Degree: 2019, Delft University of Technology
URL: http://resolver.tudelft.nl/uuid:9b0e73a5-6be2-478c-8d1e-5e19718e96d2
► Vegetation water content (VWC) is an important parameter for sustainable land and water management. In agriculture, VWC can be used to monitor drought and assess…
(more)
▼ Vegetation
water content (VWC) is an important parameter for sustainable land and
water management. In agriculture, VWC can be used to monitor drought and assess crop productivity. Being able to monitor VWC is important to reduce agricultural vulnerability and scientifically manage agricultural
water use. Due to the dense in-situ networks are expensive and have difficulties in capturing the large spatial variability of VWC. Therefore, remote sensing has great potential in VWC monitoring. With the application of remote sensing, worldwide data with coarse or fine spatial and temporal resolution can be extracted with relatively low cost. Vegetation Optical
Depth (VOD), extracted from the radar remote sensing observations, is a dimensionless parameter that highly related to VWC. Thus, VOD can be used as an indicator for VWC. The present research aims to thoroughly analyze the relation between VOD and VWC. High temporal backscatter data and detailed field experiment data of soil moisture and vegetation
water content during a full growing season of corn (between 18 April 2018 to 13 June 2018) were used. Correlations between VOD and VWC were analyzed. The result shows that VOD is highly related to VWC
bulk. However, the linear relation between VWC
bulk and VOD is only valid before the heading stage at both co- and cross-polarization. Then, random forest machine learning was conducted to determine the sensitivity of VOD to the
water content of different parts of the plant. This sensitivity analysis contains two parts: a) the sensitivity of VOD to the
water content of different vegetation components and b) The sensitivity of VOD to stem and leaf
water content at different heights. The results of a) show that VOD is more sensitive to stem and leaf
water content in the vegetative stage whereas more sensitive to ear
water content during the reproductive stage. Besides, stem, leaf and ear
water content can better capture the VOD variation during the vegetative stage. The result from b) suggests that VOD can provide information about the vertical distribution of moisture inside the canopy. Finally, a cross-comparison was conducted between VOD and other commonly used vegetation indicators, which includes NDVI and Cross-Ratio. VOD is available regardless of cloud conditions and is, therefore, more reliable than NDVI. Compared with cross-ratio, VOD is better related to vegetation moisture dynamics.
Advisors/Committee Members: Steele-Dunne, Susan (mentor), Delft University of Technology (degree granting institution).
Subjects/Keywords: single incidence angle L-band backscatter; vegetation optical depth; vegetation water content
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share





❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Gao, G. (. (2019). Monitoring vegetation dynamics using vegetation optical depth retrieved from L-band single-incidence angle backscatter observations: A field-based study over corn. (Masters Thesis). Delft University of Technology. Retrieved from http://resolver.tudelft.nl/uuid:9b0e73a5-6be2-478c-8d1e-5e19718e96d2
Chicago Manual of Style (16th Edition):
Gao, Ge (author). “Monitoring vegetation dynamics using vegetation optical depth retrieved from L-band single-incidence angle backscatter observations: A field-based study over corn.” 2019. Masters Thesis, Delft University of Technology. Accessed March 01, 2021.
http://resolver.tudelft.nl/uuid:9b0e73a5-6be2-478c-8d1e-5e19718e96d2.
MLA Handbook (7th Edition):
Gao, Ge (author). “Monitoring vegetation dynamics using vegetation optical depth retrieved from L-band single-incidence angle backscatter observations: A field-based study over corn.” 2019. Web. 01 Mar 2021.
Vancouver:
Gao G(. Monitoring vegetation dynamics using vegetation optical depth retrieved from L-band single-incidence angle backscatter observations: A field-based study over corn. [Internet] [Masters thesis]. Delft University of Technology; 2019. [cited 2021 Mar 01].
Available from: http://resolver.tudelft.nl/uuid:9b0e73a5-6be2-478c-8d1e-5e19718e96d2.
Council of Science Editors:
Gao G(. Monitoring vegetation dynamics using vegetation optical depth retrieved from L-band single-incidence angle backscatter observations: A field-based study over corn. [Masters Thesis]. Delft University of Technology; 2019. Available from: http://resolver.tudelft.nl/uuid:9b0e73a5-6be2-478c-8d1e-5e19718e96d2

Delft University of Technology
3.
Friedman, J. (author).
Development of an X-band Radar Depth Inversion Model at the Sand Motor.
Degree: 2014, Delft University of Technology
URL: http://resolver.tudelft.nl/uuid:2d4773bd-50e5-4507-ae64-1b7c333fb7c1
► A large-scale nourishment known as the Sand Motor has been implemented along the Dutch coast as a Building with Nature solution designed for the upcoming…
(more)
▼ A large-scale nourishment known as the Sand Motor has been implemented along the Dutch coast as a Building with Nature solution designed for the upcoming 20 years. Given the long-term period of the project, a combination of in situ measurements and remote sensing techniques are currently in use. An X-
band radar system is deployed at the Sand Motor, but requires further research into its applicability in such a dynamic coastal climate. Radar data can be processed into hydrodynamic parameters such as waves, currents and bathymetry information through use of a 3D Fast Fourier Transform (FFT). This technology is highly desirable for coastal engineering applications since it presents a relatively effortless method to capture high resolution spatial and temporal hydrodynamic parameters. The objective of this research is to develop an X-
band radar
depth inversion model at the Sand Motor for further investigation into remote sensing as an accurate tool for estimating nearshore hydrodynamics. The developed model should be able to accurately estimate hydrodynamic parameters from raw X-
band radar images with high temporal and spatial resolution. This thesis explains the development, calibration and validation of the X-
band MATLAB Fitting (XMFit) model at the Sand Motor for a single storm in October 2013. XMFit proved to be a valuable remote sensing tool for extracting nearshore hydrodynamics based on in situ comparisons. The SeaDarQ software developed by Nortek B.V. is also used as a quality benchmark. The storm results showed that the XMFit is more robust and accurate relative to the currently available SeaDarQ software. A sensitivity analysis was completed to further analyze the spatial and temporal patterns associated with XMFit accuracy. Spatial statistics indicated high error around the edges of the radar domain, which led to a reduced radar footprint by implementing a spatial cutoff of 2.5 km. The smaller domain results in much less scatter with a near-constant linear bias of 2 m. High accuracy in XMFit is directly linked with waves exceeding 1 m, wind speeds exceeding 12 m/s and the alignment of wind and waves. The metocean limits help conclude that XMFit requires spectra spreading in wavelength-frequency space to help constrain the dispersion shell. This finding directly links with locally generated wind waves, more commonly referred to as wind sea. Ideal results based on the spatial and temporal limits further reduced the linear bias to approximately 1.6 m. The ideal conditions show a much better agreement between radar-derived and in situ bathymetry and hydrodynamics. A relationship between the inaccuracy of XMFit during flood tide was linked to complex nearshore hydrodynamics around the Sand Motor. Note that the flood tide at the Sand Motor exhibits complex flow structures (i.e. stratification and large scale eddy formation on the lee side). XMFit averages these complex 3D flow structures evident during flood tide into a single large computational cube, which drastically simplifies the hydrodynamics. This work…
Advisors/Committee Members: Stive, M.J.F. (mentor), Reniers, A.J.H.M. (mentor), Luijendijk, A.P. (mentor), Hoekstra, R. (mentor), Swinkels, C.M. (mentor), Radermacher, M. (mentor).
Subjects/Keywords: depth inversion; Sand Motor; remote sensing; X-band radar
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share





❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Friedman, J. (. (2014). Development of an X-band Radar Depth Inversion Model at the Sand Motor. (Masters Thesis). Delft University of Technology. Retrieved from http://resolver.tudelft.nl/uuid:2d4773bd-50e5-4507-ae64-1b7c333fb7c1
Chicago Manual of Style (16th Edition):
Friedman, J (author). “Development of an X-band Radar Depth Inversion Model at the Sand Motor.” 2014. Masters Thesis, Delft University of Technology. Accessed March 01, 2021.
http://resolver.tudelft.nl/uuid:2d4773bd-50e5-4507-ae64-1b7c333fb7c1.
MLA Handbook (7th Edition):
Friedman, J (author). “Development of an X-band Radar Depth Inversion Model at the Sand Motor.” 2014. Web. 01 Mar 2021.
Vancouver:
Friedman J(. Development of an X-band Radar Depth Inversion Model at the Sand Motor. [Internet] [Masters thesis]. Delft University of Technology; 2014. [cited 2021 Mar 01].
Available from: http://resolver.tudelft.nl/uuid:2d4773bd-50e5-4507-ae64-1b7c333fb7c1.
Council of Science Editors:
Friedman J(. Development of an X-band Radar Depth Inversion Model at the Sand Motor. [Masters Thesis]. Delft University of Technology; 2014. Available from: http://resolver.tudelft.nl/uuid:2d4773bd-50e5-4507-ae64-1b7c333fb7c1

Delft University of Technology
4.
Weijenborg, A.J. (author).
Validation of X-band radar-derived current measurements at the Sand Engine: The relation between spatial scale of wave dispersion analysis and accuracy.
Degree: 2015, Delft University of Technology
URL: http://resolver.tudelft.nl/uuid:9a7bcce1-ccda-4c8c-a977-6f160a3c59fd
► Monitoring of coastal hydrodynamics over a relatively large spatial extent and a long temporal period is essential to assess the impact of coastline interventions on…
(more)
▼ Monitoring of coastal hydrodynamics over a relatively large spatial extent and a long temporal period is essential to assess the impact of coastline interventions on several functions. An example of a recent coastline intervention is the Sand Engine, a pilot project for optimization of (future) coastline maintenance. This innovative pilot project is therefore
subject to an intensive research and monitoring program that allows for development and validation of new measurement techniques. Continuous series of spatial hydrodynamics measured by remote sensing instruments have the potential to complement the temporally and spatially limited measurements of in-situ instruments. In this thesis, the accuracy of hydrodynamics measured with a land-based X-
band radar at the Sand Engine is examined. The mapping of the sea surface by an X-
band radar results in wave dispersion patterns in the radar domain over time. This allows for the extraction of spatial maps of the hydrodynamic parameters d and U by spectral (Fourier) analysis of wave dispersion patterns on a limited spatial scale (computational cube size). Previous research has shown that the spatial and temporal scale of wave dispersion analysis are critical factors for the accuracy of remotely-sensed currents. The recently developed open-source XMFit algorithm (Friedman(2014)) is used to extract X-
band radar currents. It is not exactly known what X-
band radar derived currents exactly represent. In addition, there is no agreement whether a radar measures Eulerian or Lagrangian currents. Therefore, the objective is to find the relation between spatial scale of wave dispersion analysis and X-
band radar current measurement accuracy at the Sand Engine by performing point and spatial validation of currents obtained by analysis of wave dispersion on different spatial scales. The Sand Engine study site was selected due to availability of both Eulerian ADCP and Lagrangian drifter measurements. The relation between measurement accuracy and computational cube size was found to be hyperbolic for both the point and spatial validation, which is connected to the hyperbolic relation between cube size and spectral resolution dk. In-situ current estimates are consistently overestimated by XMFit for grid points within the first 500 m from the coastline. Non-linear wave effects cause anomalies in the image spectrum compared to the definition of a useful spectrum. These anomalies do not follow linear theory on which the method is based and therefore have a negative effect on the current estimate of XMFit. In the point validation at two ADCP locations, XMFit current estimates were compared to pseudo-Lagrangian ADCP currents. The pseudo-Lagrangian ADCP currents are obtained by correcting Eulerian ADCP measurements for the surface Stokes drift. A direct comparison of XMFit to the Stokes-drift corrected ADCP measurements proves that the correlation in cross-shore direction is high. This supports that X-
band radar currents are Lagrangian. The spatial validation by drifter measurements is performed…
Advisors/Committee Members: Reniers, A.H.J.M. (mentor), Tissier, M. (mentor), Hoekstra, R. (mentor), Friedman, J. (mentor), Swinkels, C. (mentor).
Subjects/Keywords: X-band radar; Depth-inversion; XMFit; currents; validation
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share





❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Weijenborg, A. J. (. (2015). Validation of X-band radar-derived current measurements at the Sand Engine: The relation between spatial scale of wave dispersion analysis and accuracy. (Masters Thesis). Delft University of Technology. Retrieved from http://resolver.tudelft.nl/uuid:9a7bcce1-ccda-4c8c-a977-6f160a3c59fd
Chicago Manual of Style (16th Edition):
Weijenborg, A J (author). “Validation of X-band radar-derived current measurements at the Sand Engine: The relation between spatial scale of wave dispersion analysis and accuracy.” 2015. Masters Thesis, Delft University of Technology. Accessed March 01, 2021.
http://resolver.tudelft.nl/uuid:9a7bcce1-ccda-4c8c-a977-6f160a3c59fd.
MLA Handbook (7th Edition):
Weijenborg, A J (author). “Validation of X-band radar-derived current measurements at the Sand Engine: The relation between spatial scale of wave dispersion analysis and accuracy.” 2015. Web. 01 Mar 2021.
Vancouver:
Weijenborg AJ(. Validation of X-band radar-derived current measurements at the Sand Engine: The relation between spatial scale of wave dispersion analysis and accuracy. [Internet] [Masters thesis]. Delft University of Technology; 2015. [cited 2021 Mar 01].
Available from: http://resolver.tudelft.nl/uuid:9a7bcce1-ccda-4c8c-a977-6f160a3c59fd.
Council of Science Editors:
Weijenborg AJ(. Validation of X-band radar-derived current measurements at the Sand Engine: The relation between spatial scale of wave dispersion analysis and accuracy. [Masters Thesis]. Delft University of Technology; 2015. Available from: http://resolver.tudelft.nl/uuid:9a7bcce1-ccda-4c8c-a977-6f160a3c59fd

Oregon State University
5.
Cardenas, Ruander.
Study of a constrained-film bubble absorber under cycle operating conditions.
Degree: MS, Mechanical Engineering, 2009, Oregon State University
URL: http://hdl.handle.net/1957/11942
► An experimental and numerical study of absorption of ammonia vapor bubbles into a constrained thin film of ammonia-water solution is presented in the context of…
(more)
▼ An experimental and numerical study of
absorption of ammonia vapor bubbles into a constrained thin film of ammonia-
water solution is presented in the context of a potential reduction in size of a heat-actuated heat pump component. A large-aspect-ratio channel with a
depth of 600 µm restricts the thickness of the weak solution film, while ammonia vapor bubbles are injected from a porous wall. Experiments are performed at a nominal system pressure of 6.2 bar absolute and at an inlet weak solution temperature of 75ºC. A counter-flowing coolant in a minichannel removes the generated heat of
absorption. The mass flow rate of the weak solution, vapor flow rate, coolant inlet temperature, and mass flow rate of the coolant solution are varied. Two absorber channel geometries are considered: 1) a smooth 600 µm channel, and 2) a stepped geometry that has 2-mm deep trenches across the width of one of the channel walls. The 1-D, steady state species and energy transport equations, are solved for the smooth-channel absorber to yield, along the length of the channel, concentration and temperature profiles of the solution stream and the temperature profile of the coolant fluid stream.
Experimental results indicate that overall heat transfer coefficients vary from 700 W/m²-K to 2,300 W/m²-K, while the mass transfer conductances range from 0.024 kg/s-m² to 0.24 kg/s-m². The coolant inlet temperature has a significant effect on the mass transfer rates. At the highest inlet coolant temperature of 58ºC, up to 1.5 g/min of vapor is at best absorbed into 35 g/min of weak solution for the smooth absorber plate, while at the lowest coolant temperature of 30ºC, up tp 3 g/min of vapor is absorbed in 35 g/min of weak solution with the same absorber plate. For the stepped absorber geometry, only 1 g/min of vapor is absorbed into 35 g/min of weak solution for the highest coolant temperature of 58ºC, while for the lowest coolant temperature of 30ºC, 5 g/min of vapor is absorbed in 40 g/min of weak solution. Trends of local variation of temperature and convected vapor from the numerical parametric study complement experimental results and provide further insight into the performance of the absorber. Based on the experimental results, a preliminary size estimate for the absorber to operate in a cooling cycle with a 6 kW evaporator load is provided. Other considerations such as strong solution exit subcooling and porous plate pressure drop are also addressed.
Advisors/Committee Members: Narayanan, Vinod (advisor), Apte, Sourabh V. (committee member).
Subjects/Keywords: Ammonia-water absorption; Heat pumps
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share





❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Cardenas, R. (2009). Study of a constrained-film bubble absorber under cycle operating conditions. (Masters Thesis). Oregon State University. Retrieved from http://hdl.handle.net/1957/11942
Chicago Manual of Style (16th Edition):
Cardenas, Ruander. “Study of a constrained-film bubble absorber under cycle operating conditions.” 2009. Masters Thesis, Oregon State University. Accessed March 01, 2021.
http://hdl.handle.net/1957/11942.
MLA Handbook (7th Edition):
Cardenas, Ruander. “Study of a constrained-film bubble absorber under cycle operating conditions.” 2009. Web. 01 Mar 2021.
Vancouver:
Cardenas R. Study of a constrained-film bubble absorber under cycle operating conditions. [Internet] [Masters thesis]. Oregon State University; 2009. [cited 2021 Mar 01].
Available from: http://hdl.handle.net/1957/11942.
Council of Science Editors:
Cardenas R. Study of a constrained-film bubble absorber under cycle operating conditions. [Masters Thesis]. Oregon State University; 2009. Available from: http://hdl.handle.net/1957/11942

Delft University of Technology
6.
Sjak-Shie, E.E. (author).
Depth Control for Blind Water Jet Drilling in Bone.
Degree: 2013, Delft University of Technology
URL: http://resolver.tudelft.nl/uuid:854edbb1-efdd-49ce-b63e-45cf19297bce
► Abstract - When surgically drilling blind holes in bone using a Water Jet (WJ), control over the resulting depth is a challenging issue of paramount…
(more)
▼ Abstract - When surgically drilling blind holes in bone using a Water Jet (WJ), control over the resulting depth is a challenging issue of paramount concern. This thesis was part of a project aimed at replacing the awl and mallet technique used in traditional microfracture procedures with an arthroscopic high-pressure WJ instrument is capable of accurately drilling 2–4 mm deep holes in subchondral bone. The focus of this paper was to develop, analyze and evaluate concepts for ensuring the depthwise accuracy of a microfracturing WJ. Research was performed on both WJ systems and the microfracture procedure, and a thorough problem analysis detailing all concerning requirements and parameters was set up. It was determined that due to the strong non-uniformity of human bone, both spatially and between subjects, a WJ capable of monitoring the depth and implementing a closed-loop control system was needed to ensure safe and accurate drilling. To measure the depth of the hole and allow for feedback control, a flexible Nickel Titanium probe concept was devised and tested. The concept featured a 3D printed nozzle with built-in WJ orifice and depth probe, which could be extended down the hole made by the WJ by an ex-vivo actuator featurimg load and displacement sensors. When the load sensor detected a sudden rise in extension resistance, bottom contact was assumed and the hole depth was calculated based on the displacement of the probe. A proof-of-concept experiment showed the viability of using a flexible probe to measure the depth. Additionally, the algorithm produced for calculating the depth was shown to be robust against the hysteresis and backlash exhibited by the setup. When probing holes with depths of 0, 1, 2, 3, 4 and 5 mm and bore diameters of 1, 1.5, and 2 mm drilled in solid PMMA, the prototype managed an error mean of 0.00 mm with a SD of 0.19 mm. To test the probe in holes shaped as expected during microfracture surgery, a virtual interference experiment was carried out using mCT scans of WJ-drilled bones and simulated probes of varying diameters. Seven scans were probed from 4 different angles each; the results suggested that a probe with a 0.2–0.3 mm diameter was optimal in terms of traversing the hole without blockages and without risking over-penetration. Moreover, this thesis produced recommendations on carrying the project further, towards a fully integrated system capable of drilling accurate blind holes in human bone, in a closed-loop depth-controlled manner.
BME
BioMechanical Engineering
Mechanical, Maritime and Materials Engineering
Advisors/Committee Members: Dankelman, J. (mentor), Tuijthof, G.J.M. (mentor).
Subjects/Keywords: water jet; bone; drill; microfracture; depth control
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share





❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Sjak-Shie, E. E. (. (2013). Depth Control for Blind Water Jet Drilling in Bone. (Masters Thesis). Delft University of Technology. Retrieved from http://resolver.tudelft.nl/uuid:854edbb1-efdd-49ce-b63e-45cf19297bce
Chicago Manual of Style (16th Edition):
Sjak-Shie, E E (author). “Depth Control for Blind Water Jet Drilling in Bone.” 2013. Masters Thesis, Delft University of Technology. Accessed March 01, 2021.
http://resolver.tudelft.nl/uuid:854edbb1-efdd-49ce-b63e-45cf19297bce.
MLA Handbook (7th Edition):
Sjak-Shie, E E (author). “Depth Control for Blind Water Jet Drilling in Bone.” 2013. Web. 01 Mar 2021.
Vancouver:
Sjak-Shie EE(. Depth Control for Blind Water Jet Drilling in Bone. [Internet] [Masters thesis]. Delft University of Technology; 2013. [cited 2021 Mar 01].
Available from: http://resolver.tudelft.nl/uuid:854edbb1-efdd-49ce-b63e-45cf19297bce.
Council of Science Editors:
Sjak-Shie EE(. Depth Control for Blind Water Jet Drilling in Bone. [Masters Thesis]. Delft University of Technology; 2013. Available from: http://resolver.tudelft.nl/uuid:854edbb1-efdd-49ce-b63e-45cf19297bce

Louisiana State University
7.
Gao, Shu.
Shallow Water Depth Inversion Based on Data Mining Models.
Degree: MS, Social and Behavioral Sciences, 2015, Louisiana State University
URL: etd-11082015-112501
;
https://digitalcommons.lsu.edu/gradschool_theses/220
► This thesis focuses on applying machine-learning algorithms on water depth inversion from remote sensing images, with a case study in Michigan lake area. The goal…
(more)
▼ This thesis focuses on applying machine-learning algorithms on water depth inversion from remote sensing images, with a case study in Michigan lake area. The goal is to assess the use of the public available Landsat images on shallow water depth inversion. Firstly, ICESAT elevation data were used to determine the absolute water surface elevation. Airborne bathymetry Lidar data provide systematic measure of water bottom elevation. Subtracting water bottom elevation from water surface elevation will result in water depth. Water depth is associated with reflectance recorded as DN value in Landsat images. Water depth inversion was tested on ANN models, SVM models with four different kernel functions and regression tree model that exploit the correlation between water depth and image band ratios. The result showed that the RMSE (root-mean-square error) of all models are smaller than 1.5 meters and the R2 of them are greater than 0.81. The conclusion is Landsat images can be used to measure water depth in shallow area of the lakes. Potentially, water volume change of the Great Lakes can be monitored by using the procedure explored in this research.
Subjects/Keywords: water depth inversion; regression tree; ANN; SVM
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share





❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Gao, S. (2015). Shallow Water Depth Inversion Based on Data Mining Models. (Masters Thesis). Louisiana State University. Retrieved from etd-11082015-112501 ; https://digitalcommons.lsu.edu/gradschool_theses/220
Chicago Manual of Style (16th Edition):
Gao, Shu. “Shallow Water Depth Inversion Based on Data Mining Models.” 2015. Masters Thesis, Louisiana State University. Accessed March 01, 2021.
etd-11082015-112501 ; https://digitalcommons.lsu.edu/gradschool_theses/220.
MLA Handbook (7th Edition):
Gao, Shu. “Shallow Water Depth Inversion Based on Data Mining Models.” 2015. Web. 01 Mar 2021.
Vancouver:
Gao S. Shallow Water Depth Inversion Based on Data Mining Models. [Internet] [Masters thesis]. Louisiana State University; 2015. [cited 2021 Mar 01].
Available from: etd-11082015-112501 ; https://digitalcommons.lsu.edu/gradschool_theses/220.
Council of Science Editors:
Gao S. Shallow Water Depth Inversion Based on Data Mining Models. [Masters Thesis]. Louisiana State University; 2015. Available from: etd-11082015-112501 ; https://digitalcommons.lsu.edu/gradschool_theses/220

NSYSU
8.
Wang, Kai-hsuan.
Optical study of monolayer MoS2 film in high magnetic field.
Degree: Master, Physics, 2015, NSYSU
URL: http://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0628115-091340
► Recently, motivated by the discovery of graphene, two-dimensional materials have attracted more attention. MoS2 is one of focused two-dimensional material [1,2], owning two its gapped…
(more)
▼ Recently, motivated by the discovery of graphene, two-dimensional materials have attracted more attention. MoS2 is one of focused two-dimensional material [1,2], owning two its gapped energy structure and the similar crystal structure with graphene. The energy structure of MoS2 changes from the indirect
band gap of 1.29 eV to the direct
band gap of 1.9 eV when it is thinned from bulk to monolayer [3-7]. Recently, Yen-Hung Ho et al. have studied the Landau levels split on monolayer MoS2 in high magnetic fields, which suggests the energy gap will show linear dependent with increase of magnetic field [8]. However, the high-field experimental evidence still lack.
To study the magnetic-field dependent of energy structure, we have constructed an optical spectrum system. Similar experiments were performed in a middle-pulsed-high-magnetic-field system that is located in the International MegaGauss Science Laboratory, The Institute for Solid State Physics, University of Tokyo, Japan. In Taiwan, we can measure the spectrum from 90 K to 300 K. In Japan, we measured only in 4 K, 77 K and room temperature.
In the literature, the monolayer MoS2 film have two
absorption peaks, 1.95 and 2.08 eV, in the visible region [9]. The
absorption peaks show blue shift when temperature decreases. This result is same as other one, the reason just caused by thermal expansion [10]. We observed that the temperature dependence of
absorption peak showed dramatic change at T ~ 200 K, which cannot be explained by thermal expansion effect. The thermal-induced lattice anomaly could cause it. To know the origin of this behavior, more detailed experiments are needed.
We performed the magnetic-field-dependent optical measurements by using the pulse magnetic fields. With our home made coil design we acheieved peak field value of 8 T, 29 T and 52 T. When T = 77 K, the peaks behave red shift with increase of magnetic fields. In case of 4 K, the peaks show no tendency with magnetic field. Due to limited magnetic fields for the measured optical spectrum, it is hard to give a convincible conclusion on magnetic field effect of MoS2. After we synthesize new samples, we will perform further experiments in more different magnetic fields with the pulsed-magnetic-field system in Taiwan.
Advisors/Committee Members: Jim-Long Her (committee member), Hung-Duen Yang (committee member), Jiunn-Yuan Lin (chair), Hsiung Chou (chair).
Subjects/Keywords: band-gap; MoS2; absorption spectrum; high magnetic field; Two-dimensional materials
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share





❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Wang, K. (2015). Optical study of monolayer MoS2 film in high magnetic field. (Thesis). NSYSU. Retrieved from http://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0628115-091340
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Chicago Manual of Style (16th Edition):
Wang, Kai-hsuan. “Optical study of monolayer MoS2 film in high magnetic field.” 2015. Thesis, NSYSU. Accessed March 01, 2021.
http://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0628115-091340.
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
MLA Handbook (7th Edition):
Wang, Kai-hsuan. “Optical study of monolayer MoS2 film in high magnetic field.” 2015. Web. 01 Mar 2021.
Vancouver:
Wang K. Optical study of monolayer MoS2 film in high magnetic field. [Internet] [Thesis]. NSYSU; 2015. [cited 2021 Mar 01].
Available from: http://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0628115-091340.
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Council of Science Editors:
Wang K. Optical study of monolayer MoS2 film in high magnetic field. [Thesis]. NSYSU; 2015. Available from: http://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0628115-091340
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
9.
Saint Amans, Charles.
Etude du comportement sous choc d'un matériau énergétique par spectroscopie Raman in situ : Study of the shock to detonation transition phenomenon in high explosives.
Degree: Docteur es, Energétique, thermique, combustion, 2014, Chasseneuil-du-Poitou, Ecole nationale supérieure de mécanique et d'aérotechnique
URL: http://www.theses.fr/2014ESMA0025
► L’amélioration des performances des dispositifs pyrotechniques requiert une description fine de la transition choc/détonation (TCD) dans les explosifs. Les modèles de TCD existant comportent une…
(more)
▼ L’amélioration des performances des dispositifs pyrotechniques requiert une description fine de la transition choc/détonation (TCD) dans les explosifs. Les modèles de TCD existant comportent une part d’empirisme qu’il est souhaitable de réduire à l’aide de données expérimentales à l’échelle microscopique. Pour cela, nous avons mis au point un dispositif permettant de générer des chocs de 2 à 30 GPa et d’analyser en temps réel l’évolution du matériau par spectroscopie. Le système de mesure comporte un laser sonde et un ensemble de spectroscopie Raman rapide. Ce dispositif a été utilisé pour l’étude des mécanismes d’initiation d’un explosif appelé TATB. L’évolution des spectres Raman en fonction de la pression révèle un couplage entre les modes de vibration des groupements NO2 et NH2 provenant de la présence d’un réseau de liaisons hydrogène au sein du TATB. Ce réseau est responsable de la grande stabilité de la molécule. Quelques différences entre les régimes statique et dynamique, imputables à l’effet du chauffage par le choc, sont mises en évidence ; elles semblent indiquer un affaiblissement du réseau de liaisons hydrogène. Les résultats font également apparaître une atténuation progressive du signal Raman sous choc avec la pression. A partir de 9 GPa, le signal n’est plus détectable. Des visualisations par caméras rapides montrent que cette atténuation du signal Raman est accompagnée d’un assombrissement progressif du TATB qui devient totalement opaque à 9 GPa. Des expériences de réflectivité sous choc ont montré que ces deux phénomènes sont dus à un élargissement de la bande d’absorption du TATB.
Improving performances and safety of pyrotechnic devices requires a sharp knowledge of the shock to detonation transition phenomenon in high explosives. Current models to describe this phenomenon largely involve empiric parameters based on macro scale experiments. To improve predictive capability of these models, it is necessary to get experimental data at a microscopic scale. To provide such data, we developed an experimental setup to shock a high explosive up to 30 GPa and perform in-situ measurement of its Raman spectra under this loading. The device includes a shock generator based on explosive driven plate impact triggered by a laser pulse and a diagnostic involving an excitation laser and a spectrometer coupled with an intensified CCD. This experiment has been applied to an insensitive high explosive named TATB. Pressure driven evolution of the Raman spectra reveals an important coupling between NO2 and NH2 vibration modes that is due to a strong H bonding within TATB crystal. This bonding is clearly linked to TATB high stability. Differences observed between dynamic and static loading are attributed to shock heating resulting in H bonding weakening. Moreover, results show a progressive decrease in Raman spectra intensity with increasing shock pressure down to a complete signal loss at about 9 GPa. High speed visualisations reveal a progressive darkening of the sample leading to complete opacity at 9 GPa.…
Advisors/Committee Members: Rességuier, Thibaut de (thesis director), Hébert, Philippe (thesis director).
Subjects/Keywords: TATB; Opacification; Bande d'absorption; Lasers; TATB; Darkening; Absorption band; Lasers
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share





❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Saint Amans, C. (2014). Etude du comportement sous choc d'un matériau énergétique par spectroscopie Raman in situ : Study of the shock to detonation transition phenomenon in high explosives. (Doctoral Dissertation). Chasseneuil-du-Poitou, Ecole nationale supérieure de mécanique et d'aérotechnique. Retrieved from http://www.theses.fr/2014ESMA0025
Chicago Manual of Style (16th Edition):
Saint Amans, Charles. “Etude du comportement sous choc d'un matériau énergétique par spectroscopie Raman in situ : Study of the shock to detonation transition phenomenon in high explosives.” 2014. Doctoral Dissertation, Chasseneuil-du-Poitou, Ecole nationale supérieure de mécanique et d'aérotechnique. Accessed March 01, 2021.
http://www.theses.fr/2014ESMA0025.
MLA Handbook (7th Edition):
Saint Amans, Charles. “Etude du comportement sous choc d'un matériau énergétique par spectroscopie Raman in situ : Study of the shock to detonation transition phenomenon in high explosives.” 2014. Web. 01 Mar 2021.
Vancouver:
Saint Amans C. Etude du comportement sous choc d'un matériau énergétique par spectroscopie Raman in situ : Study of the shock to detonation transition phenomenon in high explosives. [Internet] [Doctoral dissertation]. Chasseneuil-du-Poitou, Ecole nationale supérieure de mécanique et d'aérotechnique; 2014. [cited 2021 Mar 01].
Available from: http://www.theses.fr/2014ESMA0025.
Council of Science Editors:
Saint Amans C. Etude du comportement sous choc d'un matériau énergétique par spectroscopie Raman in situ : Study of the shock to detonation transition phenomenon in high explosives. [Doctoral Dissertation]. Chasseneuil-du-Poitou, Ecole nationale supérieure de mécanique et d'aérotechnique; 2014. Available from: http://www.theses.fr/2014ESMA0025

University of the Western Cape
10.
Nwambaekwe, Kelechi Chiemezie.
Tellurium attenuation of kesterite band-gap for improved photovoltaic efficiency
.
Degree: 2019, University of the Western Cape
URL: http://hdl.handle.net/11394/6656
► Tellurium is a member of the chalcogen group in the periodic table and is known to be a better semiconductor material when compared to sulfur…
(more)
▼ Tellurium is a member of the chalcogen group in the periodic table and is known to be a better semiconductor material when compared to sulfur and selenium. By introducing tellurium into the kesterite structure there would be an improvement in the semiconducting property of the kesterite material. This research focused on incorporating tellurium into kesterite structure in order to reduce its
band-gap thereby improving its light
absorption and ultimately lead to a more efficient photovoltaic effect. For a typical synthesis, kesterite nanoparticles were synthesized by anion hot injection process which involved the injection of the anion precursor comprising of sulfur, selenium and tellurium in diethylene glycol into a solution containing the cation precursor which are copper (II) chloride, Zinc chloride and tin (II) chloride which are dissolved in diethylene glycol. The synthesized nanoparticles were copper zinc tin sulfide (CZTS), copper zinc tin sulfide selenide telluride (CZTSSeTe) and copper zinc tin sulfide telluride (CZTSTe). Morphological characterization of the synthesized nanoparticles was carried out by high-resolution scanning electron microscopy (HRSEM) and high-resolution transmission electron microscopy (HRTEM) to obtain the shape of the surface and internal structure of the nanoparticles respectively. The micrograph obtained from HRSEM shows that all synthesized nanoparticles had a flower-like surface appearance which is a common morphology obtained for non-vacuum synthesized kesterite nanoparticles. The micrograph obtained from TEM showed that all nanoparticles were agglomerated and had a black surface covering which attributable to the solvent used during synthesis, washing and centrifugation. The internal structure of the synthesized nanoparticles was obtained through small angle x-ray scattering (SAXS) plot of the shapes. The shape obtained for the nanoparticles were core shell hollow sphere for CZTS, core shell dumb-bell for CZTSSeTe and solid sphere for CZTSTe.
Advisors/Committee Members: Iwuoha, Emmanuel (advisor), Masikini, Milua (advisor).
Subjects/Keywords: Tellurium;
Kesterite;
Band-gap;
Photovoltaic effect;
Light absorption
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share





❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Nwambaekwe, K. C. (2019). Tellurium attenuation of kesterite band-gap for improved photovoltaic efficiency
. (Thesis). University of the Western Cape. Retrieved from http://hdl.handle.net/11394/6656
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Chicago Manual of Style (16th Edition):
Nwambaekwe, Kelechi Chiemezie. “Tellurium attenuation of kesterite band-gap for improved photovoltaic efficiency
.” 2019. Thesis, University of the Western Cape. Accessed March 01, 2021.
http://hdl.handle.net/11394/6656.
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
MLA Handbook (7th Edition):
Nwambaekwe, Kelechi Chiemezie. “Tellurium attenuation of kesterite band-gap for improved photovoltaic efficiency
.” 2019. Web. 01 Mar 2021.
Vancouver:
Nwambaekwe KC. Tellurium attenuation of kesterite band-gap for improved photovoltaic efficiency
. [Internet] [Thesis]. University of the Western Cape; 2019. [cited 2021 Mar 01].
Available from: http://hdl.handle.net/11394/6656.
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Council of Science Editors:
Nwambaekwe KC. Tellurium attenuation of kesterite band-gap for improved photovoltaic efficiency
. [Thesis]. University of the Western Cape; 2019. Available from: http://hdl.handle.net/11394/6656
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Université Catholique de Louvain
11.
Waroquiers, David.
Electronic and optical properties of crystalline and amorphous silica from first-principles.
Degree: 2013, Université Catholique de Louvain
URL: http://hdl.handle.net/2078.1/125512
► Silicon dioxide is a material of particular technological interest for its exceptional combination of properties. Indeed, both its crystalline forms and amorphous phase are widely…
(more)
▼ Silicon dioxide is a material of particular technological interest for its exceptional combination of properties. Indeed, both its crystalline forms and amorphous phase are widely used in many electronic and optoelectronic technologies. The amorphous form (a-SiO2) is present in many electronic devices as a gate dielectric in MOS transistors. Optical fibers are mostly made of a-SiO2 as it shows a very good optical transmission over a large range of frequencies. In all these applications, defects and impurities play an important role in the actual properties of the devices. In particular, they can cause an attenuation of the optical signal and a decrease of the bandwidth in optical fibers. An accurate understanding of these degradation processes is thus essential for the development of quality glasses as well as for improving their properties.
In this work, the electronic and optical properties of pure and defect-containing silica are investigated by means of first-principles approaches. Optical spectra for the pure bulk systems are obtained with good agreement with experiment. A reverse engineering procedure is suggested to accurately determine the band gap of both the crystalline and amorphous phases, thus solving this long-standing problem. The electronic properties of hydrogen states in silica are then investigated. Their configurational, electronic and stability properties are obtained for a large statistical ensemble. Other, more technical topics are also covered in this work. The supercell and plasmon-pole approximations in GW electronic structure calculations are studied in detail in order to assess their reliability. Finally, a recently proposed exchange-correlation functional is carefully analyzed. It is shown to yield much better band gaps within density functional theory but at the expense of a less reliable valence electronic structure.
(FSA 3) – UCL, 2013
Advisors/Committee Members: UCL - SST/IMCN/NAPS - Nanoscopic Physics, Gonze, Xavier, Defrance, Pierre, Rignanese, Gian-Marco, Flandre, Denis, Pasquarello, Alfredo, Bruneval, Fabien.
Subjects/Keywords: Amorphous silica; Quartz; Absorption; Hydrogen; GW; BSE; DFT; Band gap
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share





❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Waroquiers, D. (2013). Electronic and optical properties of crystalline and amorphous silica from first-principles. (Thesis). Université Catholique de Louvain. Retrieved from http://hdl.handle.net/2078.1/125512
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Chicago Manual of Style (16th Edition):
Waroquiers, David. “Electronic and optical properties of crystalline and amorphous silica from first-principles.” 2013. Thesis, Université Catholique de Louvain. Accessed March 01, 2021.
http://hdl.handle.net/2078.1/125512.
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
MLA Handbook (7th Edition):
Waroquiers, David. “Electronic and optical properties of crystalline and amorphous silica from first-principles.” 2013. Web. 01 Mar 2021.
Vancouver:
Waroquiers D. Electronic and optical properties of crystalline and amorphous silica from first-principles. [Internet] [Thesis]. Université Catholique de Louvain; 2013. [cited 2021 Mar 01].
Available from: http://hdl.handle.net/2078.1/125512.
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Council of Science Editors:
Waroquiers D. Electronic and optical properties of crystalline and amorphous silica from first-principles. [Thesis]. Université Catholique de Louvain; 2013. Available from: http://hdl.handle.net/2078.1/125512
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology
12.
Sláma, Radek.
Studium vlivu uzavíracích nátěrů na odolnost betonu proti povětrnostním vlivům: Study of the effect of sealing paints on the resistance of concrete to weathering.
Degree: 2019, Brno University of Technology
URL: http://hdl.handle.net/11012/84820
► Purpose of this bachelor thesis is to summarize existing knowledge of sealing paints and evaluate its effect on concrete surface. Emphasis is placed especially on…
(more)
▼ Purpose of this bachelor thesis is to summarize existing knowledge of sealing paints and evaluate its effect on concrete surface. Emphasis is placed especially on description of single paint type, application methods and description of degradation effect on concrete, which protective painting should prevent. In experimental part of this thesis are researched properities of chosen sealing paintings types on resistence of concrete to wheathering. Observed tests are especially
absorption, resistance of concrete surface to effect of chemical and defrosting substances and
depth of penetration of
water under pressure.
Advisors/Committee Members: Hubáček, Adam (advisor), Hela,, Vlastimil (referee).
Subjects/Keywords: Trvanlivost betonu; uzavírací nátěry; vytvrzování povrchu; nasákavost; odolnost proti CHRL; hloubka průsaku tlakovou vodou; Durability of concrete; sealing paints; hardening of surface; absorption; resistance to CHDS; depth of penetration of water under pressure
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share





❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Sláma, R. (2019). Studium vlivu uzavíracích nátěrů na odolnost betonu proti povětrnostním vlivům: Study of the effect of sealing paints on the resistance of concrete to weathering. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/84820
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Chicago Manual of Style (16th Edition):
Sláma, Radek. “Studium vlivu uzavíracích nátěrů na odolnost betonu proti povětrnostním vlivům: Study of the effect of sealing paints on the resistance of concrete to weathering.” 2019. Thesis, Brno University of Technology. Accessed March 01, 2021.
http://hdl.handle.net/11012/84820.
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
MLA Handbook (7th Edition):
Sláma, Radek. “Studium vlivu uzavíracích nátěrů na odolnost betonu proti povětrnostním vlivům: Study of the effect of sealing paints on the resistance of concrete to weathering.” 2019. Web. 01 Mar 2021.
Vancouver:
Sláma R. Studium vlivu uzavíracích nátěrů na odolnost betonu proti povětrnostním vlivům: Study of the effect of sealing paints on the resistance of concrete to weathering. [Internet] [Thesis]. Brno University of Technology; 2019. [cited 2021 Mar 01].
Available from: http://hdl.handle.net/11012/84820.
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Council of Science Editors:
Sláma R. Studium vlivu uzavíracích nátěrů na odolnost betonu proti povětrnostním vlivům: Study of the effect of sealing paints on the resistance of concrete to weathering. [Thesis]. Brno University of Technology; 2019. Available from: http://hdl.handle.net/11012/84820
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Australian National University
13.
Severini, Alan David.
Root depth: a trait to increase water use and yield of wheat
.
Degree: 2015, Australian National University
URL: http://hdl.handle.net/1885/117150
► Crops with deeper roots could potentially capture more soil resources and as a consequence yield more. However, as sampling roots by soil coring is challenging,…
(more)
▼ Crops with deeper roots could potentially capture more
soil resources and as a consequence yield more. However, as
sampling roots by soil coring is challenging, there are few
examples of genetic diversity determined under field conditions.
Canopy temperature, an indicator of transpiration, could be used
instead of direct coring to screen for wheat varieties with
increased access to deep water and hence deep roots in the field.
In this thesis we aimed (i) to seek genetic diversity in rooting
depth, root length density and relate these traits to yield in a
wide range of triticale and wheat germplasm, and (ii) to test the
usefulness of continuously-monitored canopy temperature and soil
water status for phenotyping two commercial wheat varieties that
differ in rooting depth. In the first set of field experiments,
rooting depth, root length density and yield were measured in 34
wheat and 2 triticale varieties. Roots were sampled by
soil-coring with a tractor-mounted hydraulic press and were later
counted by the 'core break' method. Root length density was
predicted from root count density. In the second set of
experiments, canopy temperature was measured with fixed infra-red
thermometers, and soil water suction was determined with gypsum
blocks buried at 20 cm intervals, from 20 to 160 cm depth. A crop
water-stress index (CWSI) was calculated to normalise for the
effects of vapour pressure deficit over canopy temperature. Soil
water retention curves fitted to the soil of the site were used
to convert soil water suction into soil water content. Shoot
biomass and grain yield were estimated from 0.7 m2 samples per
plot in all experiments. In the experiments seeking genetic
variability, we found that triticale produced deeper roots than
commercial spring-wheat (p < 0.10), and shorter varieties
produced deeper roots than taller varieties (p < 0.10).
Moreover, rooting depth was related to shoot biomass (R2 = 0.66,
p < 0.001) and grain yield (R2 = 0.56, p < 0.001) across
experiments and genotypes but not between genotypes within the
same experiment. In the experiments analysing canopy temperature
and water-use continuously, differences in deep-root length were
not statistically significant between the two varieties. The
variety Gregory had greater root length at depths beneath 1 m,
was cooler, used more water and that water was withdrawn from
deeper soil layers than the other variety, Derrimut. Using CWSI
gave better predictions of soil water status than canopy
temperature per se. By taking up more water during grain filling,
Gregory produced more yield at a rate of 54 kg ha-1 mm-1 . CWSI
did not correlate with day-to-day changes in water use. We
conclude that (i) there is genetic diversity in rooting depth
within triticale and wheat germplasm; (ii) by enabling the
calculation of a CWSI, continuously…
Subjects/Keywords: Rooting depth;
water use;
wheat;
yield;
water-use efficiency;
canopy temperature
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share





❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Severini, A. D. (2015). Root depth: a trait to increase water use and yield of wheat
. (Thesis). Australian National University. Retrieved from http://hdl.handle.net/1885/117150
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Chicago Manual of Style (16th Edition):
Severini, Alan David. “Root depth: a trait to increase water use and yield of wheat
.” 2015. Thesis, Australian National University. Accessed March 01, 2021.
http://hdl.handle.net/1885/117150.
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
MLA Handbook (7th Edition):
Severini, Alan David. “Root depth: a trait to increase water use and yield of wheat
.” 2015. Web. 01 Mar 2021.
Vancouver:
Severini AD. Root depth: a trait to increase water use and yield of wheat
. [Internet] [Thesis]. Australian National University; 2015. [cited 2021 Mar 01].
Available from: http://hdl.handle.net/1885/117150.
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Council of Science Editors:
Severini AD. Root depth: a trait to increase water use and yield of wheat
. [Thesis]. Australian National University; 2015. Available from: http://hdl.handle.net/1885/117150
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

University of Alberta
14.
Christensen, Andre Forrest.
Influence of Soil Capping Depth on Water Dynamics in
Phosphogypsum Stack Reclamation.
Degree: MS, Department of Renewable Resources, 2013, University of Alberta
URL: https://era.library.ualberta.ca/files/gt54kn67f
► The influence of capping soil depth on water dynamics was investigated at a decommissioned phosphogypsum (PG) stack in Fort Saskatchewan, Alberta. PG is the a…
(more)
▼ The influence of capping soil depth on water dynamics
was investigated at a decommissioned phosphogypsum (PG) stack in
Fort Saskatchewan, Alberta. PG is the a by-product in phosphoric
acid production, a necessary component of phosphorus fertilizer.
Currently, there are no environmental regulations governing the
depth of capping soil required for PG stack reclamation. Time
Domain Reflectometry (TDR), MPS-1 matric potential sensors and
conservative tracer application were used to assess water balance
across capping soil depths. Results from the varying experiments
indicated that an increase in capping soil depth contributed to
greater infiltration of spring snowmelt water resulting in deeper
penetration of the advective water front into the reclaimed system.
Percolation estimates for capping soil depths < 46 cm were
<3% of annual precipitation; however, the temporal variation
in downward flux estimates suggest spring snowmelt is the dominant
event contributing to percolation.
Subjects/Keywords: Water Balance; Soil Depth; Phosphogypsum; Capping Depth; Percolation; TDR; Reclamation; PG Stack; ET Cover System
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share





❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Christensen, A. F. (2013). Influence of Soil Capping Depth on Water Dynamics in
Phosphogypsum Stack Reclamation. (Masters Thesis). University of Alberta. Retrieved from https://era.library.ualberta.ca/files/gt54kn67f
Chicago Manual of Style (16th Edition):
Christensen, Andre Forrest. “Influence of Soil Capping Depth on Water Dynamics in
Phosphogypsum Stack Reclamation.” 2013. Masters Thesis, University of Alberta. Accessed March 01, 2021.
https://era.library.ualberta.ca/files/gt54kn67f.
MLA Handbook (7th Edition):
Christensen, Andre Forrest. “Influence of Soil Capping Depth on Water Dynamics in
Phosphogypsum Stack Reclamation.” 2013. Web. 01 Mar 2021.
Vancouver:
Christensen AF. Influence of Soil Capping Depth on Water Dynamics in
Phosphogypsum Stack Reclamation. [Internet] [Masters thesis]. University of Alberta; 2013. [cited 2021 Mar 01].
Available from: https://era.library.ualberta.ca/files/gt54kn67f.
Council of Science Editors:
Christensen AF. Influence of Soil Capping Depth on Water Dynamics in
Phosphogypsum Stack Reclamation. [Masters Thesis]. University of Alberta; 2013. Available from: https://era.library.ualberta.ca/files/gt54kn67f

University of Alberta
15.
Krishnan, Devishree.
Renal proximal tubular reabsorption of sodium, water and
calcium are interconnected.
Degree: PhD, Department of Physiology, 2016, University of Alberta
URL: https://era.library.ualberta.ca/files/chx11xf44k
► Intravascular volume is maintained by complex interplay between organ systems with a main role for renal sodium, and water handling. The glomerulus filters a large…
(more)
▼ Intravascular volume is maintained by complex
interplay between organ systems with a main role for renal sodium,
and water handling. The glomerulus filters a large quantity of
water and salt daily with the majority of sodium, water and calcium
being reabsorbed from the proximal tubule (PT). The renal
reabsorption of sodium, water and calcium are interconnected.
Apical influx of sodium from the PT occurs via NHE3 in exchange for
a cytosolic proton. Cytosolic sodium is excreted back into the
blood via either sodium potassium ATPase or a sodium dependent
bicarbonate transporter. The rate-limiting step for NHE3 activity
is the presence of a cytosolic proton. This is generated by
cytosolic carbonic anhydrase II (CAII), an enzyme mediating the
catalysis of CO2 and H2O to form HCO3- and H+. CO2 and H2O enter
the PT epithelial cell through the water channel aquaporin-1
(AQP1). Osmotically driven water flux across the PT also drives
calcium reabsorption from this segment, a process linked by NHE3.
CAII interacts with many membrane transporters including NHE1, AE1,
MCT1 and NBCe1. We identified potential CAII binding sites in both
NHE3 and AQP1. A primary hypothesis of this thesis is that CAII
physically and functionally interacts with both NHE3 and AQP1. CAII
and NHE3 were closely associated in a renal proximal tubular cell
culture model as revealed by a proximity ligation assay. Direct
physical interaction was confirmed in solid-phase binding assays
with immobilized CAII and C-terminal NHE3 glutathione-S-transferase
fusion constructs. To assess the effect of CAII on NHE3 function,
we expressed NHE3 in a proximal tubule cell line and measured NHE3
activity. NHE3-expressing cells had a significantly greater rate of
intracellular pH recovery than controls. Inhibition of endogenous
CAII activity with acetazolamide significantly decreased NHE3
activity, indicating that CAII activates NHE3. To ascertain whether
CAII binding per se activates NHE3, we expressed NHE3 with
wild-type CAII, a catalytically inactive CAII mutant (CAII-V143Y),
or a mutant unable to bind other transporters (CAII-HEX). NHE3
activity increased upon wild-type CAII coexpression, but not in the
presence of the CAII-V143Y or HEX mutant. These studies support an
association between CAII and NHE3 that increases the transporter's
activity. CAII colocalizes with AQP1 in the renal proximal tubule.
Expression of AQP1 with CAII increased water flux relative to AQP1
expression alone. Expression of catalytically inactive CAII failed
to increase water flux through AQP1. Proximity ligation assays
revealed close association of CAII and AQP1, an effect requiring an
acidic cluster of amino acids in the cytosolic tail of AQP1. This
motif was also necessary for CAII to increase AQP1-mediated water
flux. Red blood cell ghosts resealed with CAII demonstrated
increased osmotic water permeability compared with ghosts resealed
with albumin. Renal cortical membrane vesicles isolated from
CAII-deficient mice has reduced water flux, which is measured by
stopped-flow light scattering.…
Subjects/Keywords: RENAL PROXIMAL TUBULE; RENAL SODIUM ABSORPTION; RENAL CALCIUM ABSORPTION; RENAL WATER ABSORPTION
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share





❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Krishnan, D. (2016). Renal proximal tubular reabsorption of sodium, water and
calcium are interconnected. (Doctoral Dissertation). University of Alberta. Retrieved from https://era.library.ualberta.ca/files/chx11xf44k
Chicago Manual of Style (16th Edition):
Krishnan, Devishree. “Renal proximal tubular reabsorption of sodium, water and
calcium are interconnected.” 2016. Doctoral Dissertation, University of Alberta. Accessed March 01, 2021.
https://era.library.ualberta.ca/files/chx11xf44k.
MLA Handbook (7th Edition):
Krishnan, Devishree. “Renal proximal tubular reabsorption of sodium, water and
calcium are interconnected.” 2016. Web. 01 Mar 2021.
Vancouver:
Krishnan D. Renal proximal tubular reabsorption of sodium, water and
calcium are interconnected. [Internet] [Doctoral dissertation]. University of Alberta; 2016. [cited 2021 Mar 01].
Available from: https://era.library.ualberta.ca/files/chx11xf44k.
Council of Science Editors:
Krishnan D. Renal proximal tubular reabsorption of sodium, water and
calcium are interconnected. [Doctoral Dissertation]. University of Alberta; 2016. Available from: https://era.library.ualberta.ca/files/chx11xf44k

University of California – San Diego
16.
Chen, Sijie.
Comparison of BC and BrC Absorption from AERONET and In Situ Apportionment at Wintertime Fresno.
Degree: Earth Sciences, 2018, University of California – San Diego
URL: http://www.escholarship.org/uc/item/9zg7b35f
► The significant radiative impacts of black carbon (BC) and brown carbon (BrC) have been increasingly recognized but remain highly uncertain. The Aerosol Robotic Network (AERONET)…
(more)
▼ The significant radiative impacts of black carbon (BC) and brown carbon (BrC) have been increasingly recognized but remain highly uncertain. The Aerosol Robotic Network (AERONET) provides measurements of aerosol absorption optical depths (AAOD) and other parameters which could be used to estimate BC and BrC absorption across its global network, but the uncertainty of the apportionment method is not well understood. Surface measurements of aerosol optical properties were collected from January 13 to February 10, 2013, and from December 25, 2014, to January 13, 2015, at Fresno, California. This work compares the BC and BrC fractions from AERONET measurements apportioned by the absorption angstrom exponent (AAE) method and from the in situ measurements apportioned by the mass absorption coefficients (MAC) and thermodenuder (TD) method and scaled to planetary boundary layer height (PBLH). During the 2013 campaign, the AERONET apportionment shows that BC contributes 67% and BrC contributes 33% of the absorption at 440 nm while the in situ apportionment shows that BC contributes 89% and BrC contributes 11% of the absorption at 405 nm. During the 2014 campaign, the fraction is 72% BC and 28% BrC from the AERONET apportionment, and 68% BC and 32% BrC from the in situ apportionment. The comparisons show stronger correlations between AERONET and in situ measurements in 2014. These results show that the estimates of BC and BrC absorption from AERONET measurements using the AERONET-AAE method have good agreement with in situ estimates when the surface measurements are representative of the column properties.
Subjects/Keywords: Atmospheric sciences; Remote sensing; Absorption angstrom exponent; AERONET; Aerosol absorption optical depth; Black carbon; Brown carbon
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share





❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Chen, S. (2018). Comparison of BC and BrC Absorption from AERONET and In Situ Apportionment at Wintertime Fresno. (Thesis). University of California – San Diego. Retrieved from http://www.escholarship.org/uc/item/9zg7b35f
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Chicago Manual of Style (16th Edition):
Chen, Sijie. “Comparison of BC and BrC Absorption from AERONET and In Situ Apportionment at Wintertime Fresno.” 2018. Thesis, University of California – San Diego. Accessed March 01, 2021.
http://www.escholarship.org/uc/item/9zg7b35f.
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
MLA Handbook (7th Edition):
Chen, Sijie. “Comparison of BC and BrC Absorption from AERONET and In Situ Apportionment at Wintertime Fresno.” 2018. Web. 01 Mar 2021.
Vancouver:
Chen S. Comparison of BC and BrC Absorption from AERONET and In Situ Apportionment at Wintertime Fresno. [Internet] [Thesis]. University of California – San Diego; 2018. [cited 2021 Mar 01].
Available from: http://www.escholarship.org/uc/item/9zg7b35f.
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Council of Science Editors:
Chen S. Comparison of BC and BrC Absorption from AERONET and In Situ Apportionment at Wintertime Fresno. [Thesis]. University of California – San Diego; 2018. Available from: http://www.escholarship.org/uc/item/9zg7b35f
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

University of Johannesburg
17.
Dlamini, Nonjabulo Prudence.
Micro-organisms for the removal of copper and cobalt from aqueous solutions.
Degree: 2010, University of Johannesburg
URL: http://hdl.handle.net/10210/3115
► M.Sc.
Inorganic pollutants like heavy metals are some of the major water pollutants worldwide. They are toxic and in some cases carcinogenic even at low…
(more)
▼ M.Sc.
Inorganic pollutants like heavy metals are some of the major water pollutants worldwide. They are toxic and in some cases carcinogenic even at low concentrations. Their removal from industrial aqueous solutions, wastewater and hydrometallurgical process solutions prior to their release to the environment is necessary for a healthy biosphere which includes human beings, aquatic life and plants. There are several technologies used to remove metals such as Cu, Co, Zn, Hg from water. These include among others, ion exchange, membrane filtration, activated carbon, electrochemical treatment, chemical precipitation, reverse osmosis, coagulation and flocculation. Although they have been used in the removal of metal pollutants from water, these technologies produce high quantities of sludge. They are also expensive to operate and need well trained personnel to operate large chemical plants. Since current metal removal techniques have limitations, a need exists for the development of environmentally friendly and cost effective techniques for the removal of metal ions from aqueous media. The focus of this research project is on the use of micro-organisms as biosorbents for copper and cobalt pollutants in aqueous solutions. The experimental work was carried out on a laboratory scale and a summary of our findings is presented as follows: Synthetic sulphate solutions of copper and cobalt were prepared using CuSO4. 7H2O and CoSO4. 5H2O powders. Concentrations of 0.002 M, 0.07 M and 0.2 M copper and cobalt ions in solution were used as test synthetic solutions for our experiments. Mixed strains of bioleaching bacteria were sourced from Mintek (Randburg, South Africa) to test the viability of this research project. This consortium contained Acidithiobacillus caldus, Leptospirillum spp, Ferroplasma spp and Sulphobacillus spp. These bacteria were able to remove up to 55% copper and 25% cobalt from low concentrated copper and cobalt sulphate solutions with 69% and 58% removal demonstrated in the case of mine effluents emanating from metallurgical operations. Different strains of micro-organisms (bacteria) were isolated from mine dumps and mine operation effluents and soil from the Palabora Mining Company in Limpopo, a northern province in South Africa and Nigel Town in the Gauteng Province. The isolated bacterial strains were then identified using PCR analysis and strains from the Bacillus genre were found to be predominant. Shewanella spp was also present. Pseudomonas spp was isolated using Pseudomonas agar base. These bacteria were then cultured at different species-specific culture conditions and their capabilities to remove copper and cobalt ions first from synthetic solutions and subsequently from mine effluents emanating from metallurgical operations were tested. In the first stage of biosorption experiments, factors that affect biosorption mechanisms which include, solution concentration, biomass concentration, pH, contact time and the presence of other metal co-ions were investigated. A decrease in the amount of metal…
Subjects/Keywords: Water purification adsorption; Copper absorption and adsorption; Cobalt absorption and adsorption
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share





❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Dlamini, N. P. (2010). Micro-organisms for the removal of copper and cobalt from aqueous solutions. (Thesis). University of Johannesburg. Retrieved from http://hdl.handle.net/10210/3115
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Chicago Manual of Style (16th Edition):
Dlamini, Nonjabulo Prudence. “Micro-organisms for the removal of copper and cobalt from aqueous solutions.” 2010. Thesis, University of Johannesburg. Accessed March 01, 2021.
http://hdl.handle.net/10210/3115.
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
MLA Handbook (7th Edition):
Dlamini, Nonjabulo Prudence. “Micro-organisms for the removal of copper and cobalt from aqueous solutions.” 2010. Web. 01 Mar 2021.
Vancouver:
Dlamini NP. Micro-organisms for the removal of copper and cobalt from aqueous solutions. [Internet] [Thesis]. University of Johannesburg; 2010. [cited 2021 Mar 01].
Available from: http://hdl.handle.net/10210/3115.
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Council of Science Editors:
Dlamini NP. Micro-organisms for the removal of copper and cobalt from aqueous solutions. [Thesis]. University of Johannesburg; 2010. Available from: http://hdl.handle.net/10210/3115
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Univerzitet u Beogradu
18.
Pantić, Krstimir J., 1972-, 54306569.
Адсорбенти на бази отпадних и природних материјала за
издвајање јона тешких метала и арсена.
Degree: Tehnološko-metalurški fakultet, 2020, Univerzitet u Beogradu
URL: https://fedorabg.bg.ac.rs/fedora/get/o:22429/bdef:Content/get
► Техничко-технолошке науке - Инжењерство заштите животне средине / Applied sciences - Environmental Engineering
Предмет истраживања у оквиру израде ове докторске дисертације је проналажење и развој…
(more)
▼ Техничко-технолошке науке - Инжењерство заштите
животне средине / Applied sciences - Environmental
Engineering
Предмет истраживања у оквиру израде ове докторске
дисертације је проналажење и развој нових материјала који имају
добра адсорпциона и техно-економска својства применљива у реалним
системима за уклањање јона тешких метала и арсена. Испитивања су
укључивала: унапређење адсорпционих својстава бигра импрегнацијом
наночестицама бакра и испитивање добијеног адсорбента у реалним
системима; различите модификације отпадних полиакрилнитрилних
влакана у циљу побољшања њихових адсорпционих особина према јонима
тешких метала и арсену; оптимизовање синтезе и процеса адсорпције
јона тешких метала и арсена на синтетисане адсорбенте. У
експериментима адсорпције коришћен је природни материјал бигар
(природни калцит) и отпадна влакна полиакрилнитрила. Бигар је
погодним физичким и механичким методама припремљен за даљу
модификацију преципитацијом наночестица бакра. Преципитација
наночестица бакра на бигар вршенa је комбинацијом различитих метода
и количина наночестица у циљу добијања адсорбента са најбољим
адсорпционим карактеристикама. Отпадна влакна полиакрилнитрила
модификована су површинском модификацијом амино групама комбинујући
услове модификације (температуру, концентрацију реактаната и pH
вредност) у циљу добијања адсорбента са великим бројем активних
амино група и најбољим адсорпционим карактеристикама за катјоне. У
циљу постизања добрих адсорпционих карактеристика за анјоне
површински модификована влакна су накнадно импрегнирана
наночестицама гетита. Резултати истраживања у оквиру ове докторске
дисертације дају нам: нове јефтине и ефикасне материјале различитих
текстуралних својстава; оптималне поступке синтезе, површинске
модификације, таложења и пост-процесирања добијених адсорбената
како бисе добили материјали са побољшаним адсорпционим својствима у
процесима уклањања никла, олова, кадмијума и арсена из воде;
потпуну карактеризацију синтетисаних адсорбената применом
различитих инструменталних техника: SEM, ТЕМ, HRD, FTIR, RAMAN,
pHPZC, BET итд. допринос сазнањима о међусобном утицају својстава
материјала и параметара процеса на ефикасност уклањања тешких
метала; бољи приступ у потпуном сагледавању процеса и синтезе нових
материјала на основу експерименталних и резултата моделовања;
Такође се очекује да ће развијена методологија омогућити проактивно
и ефикасно вођење политике заштите животне средине и одрживог
развоја у циљу побољшања квалитета животне
средине.
Advisors/Committee Members: Perić-Grujić, Aleksandra, 1966-, 14092391.
Subjects/Keywords: Bigar; polyacrylonitrile fibers; absorption; heavy
metals; water
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share





❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Pantić, Krstimir J., 1972-, 5. (2020). Адсорбенти на бази отпадних и природних материјала за
издвајање јона тешких метала и арсена. (Thesis). Univerzitet u Beogradu. Retrieved from https://fedorabg.bg.ac.rs/fedora/get/o:22429/bdef:Content/get
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Chicago Manual of Style (16th Edition):
Pantić, Krstimir J., 1972-, 54306569. “Адсорбенти на бази отпадних и природних материјала за
издвајање јона тешких метала и арсена.” 2020. Thesis, Univerzitet u Beogradu. Accessed March 01, 2021.
https://fedorabg.bg.ac.rs/fedora/get/o:22429/bdef:Content/get.
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
MLA Handbook (7th Edition):
Pantić, Krstimir J., 1972-, 54306569. “Адсорбенти на бази отпадних и природних материјала за
издвајање јона тешких метала и арсена.” 2020. Web. 01 Mar 2021.
Vancouver:
Pantić, Krstimir J., 1972- 5. Адсорбенти на бази отпадних и природних материјала за
издвајање јона тешких метала и арсена. [Internet] [Thesis]. Univerzitet u Beogradu; 2020. [cited 2021 Mar 01].
Available from: https://fedorabg.bg.ac.rs/fedora/get/o:22429/bdef:Content/get.
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Council of Science Editors:
Pantić, Krstimir J., 1972- 5. Адсорбенти на бази отпадних и природних материјала за
издвајање јона тешких метала и арсена. [Thesis]. Univerzitet u Beogradu; 2020. Available from: https://fedorabg.bg.ac.rs/fedora/get/o:22429/bdef:Content/get
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

University of Ghana
19.
Bolele, K.B.
Assessment of the Impact of Manganese Deposit in Botswana Kgwakgwe Mine on the Environment
.
Degree: 2019, University of Ghana
URL: http://ugspace.ug.edu.gh/handle/123456789/33345
► The Kgwakgwe manganese deposit is 4 km southwest of Kanye village (70 km west of Gaborone, Capital City) in Botswana. The manganese deposit is surrounded…
(more)
▼ The Kgwakgwe manganese deposit is 4 km southwest of Kanye village (70 km west of Gaborone, Capital City) in Botswana. The manganese deposit is surrounded by about 30 boreholes which supply the entire Kanye population with water, through pipes into each home. Weathering of manganese and other elements from rocks (due to the geology of the area) leach into underground water within the catchment. The study assessed the quality of drinking water from the boreholes and estimated their compliance with World Health Organization Recommended Guidelines. Determined physico-chemical parameters were: conductivity, alkalinity, total dissolved solids, turbidity, pH, temperature, total hardness, chloride, colour, nitrate, sulphate, sodium and potassium). Heavy (arsenic, lead, cadmium, chromium, nickel, zinc and copper) and trace (manganese, iron and magnesium) elements are determined by atomic absorption spectrophotometry; while soil and vegetation samples were analyzed using Energy Dispersive X-Ray Fluorescence (EDXRF). Multivariate Analysis was used to differentiate boreholes based on the physico-chemical parameters. Principal Component Analysis (PCA) was used to evaluate the influence of the parameters on the borehole. The study revealed that Manganese (0.038 mg/L-0.1295 mg/L) was the only element that was found to be above the recommended WHO limit for Mn in water (0.05 mg/L). Iron was below the instrumental detection limit of 0.001 mg/L. Levels of Chromium ranges from 0.02 mg/L to 0.0355 mg/L which is below the WHO limit of 0.1 mg/L, as well as for magnesium (0.097 mg/L to 1.2277 mg/L) which was below the WHO limit of 100 mg/L. The levels of Mn in two soil samples (Sample 01 and Sample 03) analyzed, which were around the manganese deposit were 9747 mg/kg and 408.7 mg/kg respectively. Although these values were above the WHO acceptable limit of 12 mg/kg, when they were comparable to values (35 mg/kg to 24907 mg/kg) obtained in a similar study conducted in the study area. Fe in the soil samples were 27524.51 mg/kg for sample 01 (about 2 km from the Kgwakgwe Mine) and 22133.65 mg/kg for sample 03 (about 500 m from the Kgwakgwe Mine); comparable to1116 mg/kg-870 766 mg/kg obtained in 2004 by Ekosse. For vegetation, Mn in spinach leaves was 69.7 mg/kg; and Hay was below detection limit. Mn in spinach was below the WHO limit of 200 mg/kg, but comparable with 26.2 mg/kg to 3611 mg/kg obtained in 2004 by Ekosse in a similar study. Fe in spinach leaves were below detection limit while Hay leaves had 122.69 mg/kg. The level obtained was within the 101.2-3758 mg/kg by Ekosse in 2004. The levels of As, Ni, Pb, Cu, Cd, Zn in water samples were all below the instrument detection limit of 0.001 mg/L. pH ranged from 7.12 to 9.47; conductivity (493 to 1129 μs/cm); Total Hardness (88-696 mg/L). TDS (28 to 552 mg/L); Chloride (9.99-99.97 mg/L); Alkalinity (10-296 mg/L). Sodium levels ranges from 17.5 to 49.3 mg/L; Potassium levels (3.9 to 45.3 mg/L). The nutrient load, sulphate (below detection limit to 9.09 mg/L); nitrates (0.171-2.527 mg/L).…
Subjects/Keywords: Manganese;
Atomic Absorption Spectroscopy;
Mining;
Botswana;
Water
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share





❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Bolele, K. B. (2019). Assessment of the Impact of Manganese Deposit in Botswana Kgwakgwe Mine on the Environment
. (Masters Thesis). University of Ghana. Retrieved from http://ugspace.ug.edu.gh/handle/123456789/33345
Chicago Manual of Style (16th Edition):
Bolele, K B. “Assessment of the Impact of Manganese Deposit in Botswana Kgwakgwe Mine on the Environment
.” 2019. Masters Thesis, University of Ghana. Accessed March 01, 2021.
http://ugspace.ug.edu.gh/handle/123456789/33345.
MLA Handbook (7th Edition):
Bolele, K B. “Assessment of the Impact of Manganese Deposit in Botswana Kgwakgwe Mine on the Environment
.” 2019. Web. 01 Mar 2021.
Vancouver:
Bolele KB. Assessment of the Impact of Manganese Deposit in Botswana Kgwakgwe Mine on the Environment
. [Internet] [Masters thesis]. University of Ghana; 2019. [cited 2021 Mar 01].
Available from: http://ugspace.ug.edu.gh/handle/123456789/33345.
Council of Science Editors:
Bolele KB. Assessment of the Impact of Manganese Deposit in Botswana Kgwakgwe Mine on the Environment
. [Masters Thesis]. University of Ghana; 2019. Available from: http://ugspace.ug.edu.gh/handle/123456789/33345

Florida Atlantic University
20.
Abdelmola, Fatmaelzahraa.
Influence of Voids on Water Uptake in Polymer Panels.
Degree: 2018, Florida Atlantic University
URL: http://fau.digital.flvc.org/islandora/object/fau:40899
► The influence of voids on the moisture uptake of epoxy has been studied. Specimens with void contents from 0 to about 50% were prepared. Void…
(more)
▼ The influence of voids on the moisture uptake of epoxy has been studied. Specimens with void contents from 0 to about 50% were prepared. Void geometry and content were analyzed using microscopy and density methods. Void containing dry samples were characterized by Differential Scanning Calorimetry and Dynamic-Mechanical Analysis which verified consistency of chemistry of the epoxy network. The moisture uptake of specimens immersed in distilled water at 40 °C was monitored. The rate of absorption and saturation moisture content increased with increasing void content. The moisture uptake of void-free and void containing specimens was non-Fickian. The Langmuir model provided good fits to the experimental results for specimens with low to medium void content, although the moisture uptake of the high void content specimens showed substantial deviations from the Langmuir diffusion model. The moisture diffusivity agreed reasonably with predications from the Maxwell inclusion model over a range of void contents from 0 to 50%. The state of sorbed water was examined using mass balance calculations and DSC analysis. Only 6-8% of the void volume is occupied by water at saturation. Absorbed water may be classified as free and bound water. For void-free specimens, only bound water was found. The medium and high void content specimens contained water in three states: free water, freezable bound water, and non-freezable bound water. The DSC results show that the proportions of free water and freezable bound water increase with increasing void content, while the content of non-freezable bound water decreased. Moisture induced swelling decreased with increasing void content. The swelling is attributed to the content of non-freezable bound water.
2018
Degree granted: Dissertation (Ph.D.) – Florida Atlantic University, 2018.
Collection: FAU
Advisors/Committee Members: Carlsson, Leif A. (Thesis advisor), Florida Atlantic University (Degree grantor), College of Engineering and Computer Science, Department of Ocean and Mechanical Engineering.
Subjects/Keywords: Polymers – Absorption and adsorption; Epoxy resins; Water
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share





❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Abdelmola, F. (2018). Influence of Voids on Water Uptake in Polymer Panels. (Thesis). Florida Atlantic University. Retrieved from http://fau.digital.flvc.org/islandora/object/fau:40899
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Chicago Manual of Style (16th Edition):
Abdelmola, Fatmaelzahraa. “Influence of Voids on Water Uptake in Polymer Panels.” 2018. Thesis, Florida Atlantic University. Accessed March 01, 2021.
http://fau.digital.flvc.org/islandora/object/fau:40899.
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
MLA Handbook (7th Edition):
Abdelmola, Fatmaelzahraa. “Influence of Voids on Water Uptake in Polymer Panels.” 2018. Web. 01 Mar 2021.
Vancouver:
Abdelmola F. Influence of Voids on Water Uptake in Polymer Panels. [Internet] [Thesis]. Florida Atlantic University; 2018. [cited 2021 Mar 01].
Available from: http://fau.digital.flvc.org/islandora/object/fau:40899.
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Council of Science Editors:
Abdelmola F. Influence of Voids on Water Uptake in Polymer Panels. [Thesis]. Florida Atlantic University; 2018. Available from: http://fau.digital.flvc.org/islandora/object/fau:40899
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

University of Oklahoma
21.
Mancini, Alessio.
A NEW RESEARCH METHOD TO EVALUATE THE IMPACT OF WET RADOMES ON DUAL-POLARIZED WEATHER RADARS AND COMMUNICATION SYSTEMS.
Degree: PhD, 2018, University of Oklahoma
URL: http://hdl.handle.net/11244/316777
► The purpose of this dissertation is to provide a detailed study of the effect of water accumulated on wet radomes. To accomplish this goal, a…
(more)
▼ The purpose of this dissertation is to provide a detailed study of the effect of
water accumulated on wet radomes. To accomplish this goal, a novel method to evaluate the impact of wet radomes on dual-polarized weather radar systems in real-time is developed at the Advanced Radar Research Center (ARRC) of the University of Oklahoma. This technique consists of measuring in real-time, in the same direction as the radar is scanning, the level of attenuation introduced by the
water accumulated on the radome. The proposed method is based on the measurement of the reflectance at the air-radome interface, and through post-processing the attenuation can be estimated. This technique can be used as a potential solution for future radar calibration methods.
A second approach to characterize radomes, consists of measuring the radiation pattern of an 8 x 2 phased array radar antenna considering various
water formations positioned on the internal radome of the antenna. This method allows to account for sidelobe level and cross-polarization increase, and also to estimate the attenuation occurring on the mean beam.
Advisors/Committee Members: Salazar-Cerreño, Jorge (advisor), Yu, Tian-You (committee member), Sigmarsson, Hjalti (committee member), Zhang, Yan (committee member), Hong, Yang (committee member).
Subjects/Keywords: Radar; Radome; Water; Absorption; Phase array
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share





❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Mancini, A. (2018). A NEW RESEARCH METHOD TO EVALUATE THE IMPACT OF WET RADOMES ON DUAL-POLARIZED WEATHER RADARS AND COMMUNICATION SYSTEMS. (Doctoral Dissertation). University of Oklahoma. Retrieved from http://hdl.handle.net/11244/316777
Chicago Manual of Style (16th Edition):
Mancini, Alessio. “A NEW RESEARCH METHOD TO EVALUATE THE IMPACT OF WET RADOMES ON DUAL-POLARIZED WEATHER RADARS AND COMMUNICATION SYSTEMS.” 2018. Doctoral Dissertation, University of Oklahoma. Accessed March 01, 2021.
http://hdl.handle.net/11244/316777.
MLA Handbook (7th Edition):
Mancini, Alessio. “A NEW RESEARCH METHOD TO EVALUATE THE IMPACT OF WET RADOMES ON DUAL-POLARIZED WEATHER RADARS AND COMMUNICATION SYSTEMS.” 2018. Web. 01 Mar 2021.
Vancouver:
Mancini A. A NEW RESEARCH METHOD TO EVALUATE THE IMPACT OF WET RADOMES ON DUAL-POLARIZED WEATHER RADARS AND COMMUNICATION SYSTEMS. [Internet] [Doctoral dissertation]. University of Oklahoma; 2018. [cited 2021 Mar 01].
Available from: http://hdl.handle.net/11244/316777.
Council of Science Editors:
Mancini A. A NEW RESEARCH METHOD TO EVALUATE THE IMPACT OF WET RADOMES ON DUAL-POLARIZED WEATHER RADARS AND COMMUNICATION SYSTEMS. [Doctoral Dissertation]. University of Oklahoma; 2018. Available from: http://hdl.handle.net/11244/316777

Queensland University of Technology
22.
Perenlei, Ganchimeg.
Energy band engineering of complex metal oxides.
Degree: 2015, Queensland University of Technology
URL: http://eprints.qut.edu.au/90056/
► This doctoral studies focused on the development of new materials for efficient use of solar energy for environmental applications. The research investigated the engineering of…
(more)
▼ This doctoral studies focused on the development of new materials for efficient use of solar energy for environmental applications. The research investigated the engineering of the band gap of semiconductor materials to design and optimise visible-light-sensitive photocatalysts. Experimental studies have been combined with computational simulation in order to develop predictive tools for a systematic understanding and design on the crystal and energy band structures of multi-component metal oxides.
Subjects/Keywords: Bang energy; Bismuth oxide-based materials; Energy absorption; Electronic band structure; Metal substitution; Photocatalyst
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share





❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Perenlei, G. (2015). Energy band engineering of complex metal oxides. (Thesis). Queensland University of Technology. Retrieved from http://eprints.qut.edu.au/90056/
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Chicago Manual of Style (16th Edition):
Perenlei, Ganchimeg. “Energy band engineering of complex metal oxides.” 2015. Thesis, Queensland University of Technology. Accessed March 01, 2021.
http://eprints.qut.edu.au/90056/.
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
MLA Handbook (7th Edition):
Perenlei, Ganchimeg. “Energy band engineering of complex metal oxides.” 2015. Web. 01 Mar 2021.
Vancouver:
Perenlei G. Energy band engineering of complex metal oxides. [Internet] [Thesis]. Queensland University of Technology; 2015. [cited 2021 Mar 01].
Available from: http://eprints.qut.edu.au/90056/.
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Council of Science Editors:
Perenlei G. Energy band engineering of complex metal oxides. [Thesis]. Queensland University of Technology; 2015. Available from: http://eprints.qut.edu.au/90056/
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

NSYSU
23.
Fan, Hsiang-Pin.
Photocurrent and Electroabsorption Spectroscopy for Semiconductor Quantum Well Structures.
Degree: Master, Electro-Optical Engineering, 2001, NSYSU
URL: http://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0710101-144722
► In this thesis, we have setup the measurement systems for photocurrent and electro-absorption (Da) spectroscopy, and have investigated the optical characteristics of semiconductor quantum well…
(more)
▼ In this thesis, we have setup the measurement systems for photocurrent and electro-
absorption (Da) spectroscopy, and have investigated the optical characteristics of semiconductor quantum well structures in the long wavelength regime. The measured samples are of three epi-structures including a p-i-n laser structure of the symmetric multiple quantum wells (SMQWs), a p-i-n laser structure of the asymmetric multiple quantum wells (AMQWs), and n-i-n BRAQWETS structures. The samples are fabricated in mesa type photodiode structures for the measurements.
From the Da spectrum of the n-i-n BRAQWETS structures, we observe a blue shift ~ 10nm of Da peak caused by
band filling effect at +5V bias. Besides, a red shift ~ 2nm has been obtained at â5V bias caused by the quantum-confined Stark effect. The photocurrent spectrum of the SMQWs shows an e1-hh1
absorption peak at hn=0.813eV (l=1.525mm) which matches the photoluminesce spectrum. The e1-hh1 transition has a red-shift ~ 38nm at â5V bias for the SMQWs. For the AMQWs consisting of 5, 10, 15nm wells, we observe the e1-hh1
absorption peaks at 0.758eV (l=1.64mm), 0.772eV (l=1.6mm) and 0.797eV (l=1.55mm), respectively. As the AMQWs biased at â5V, a red-shift ~ 25nm is obtained for the e1-hh1 transition corresponding to the 15nm-wide wells.
Advisors/Committee Members: T. Y. Chang (chair), W. H. Cheng (chair), L. H. Peng (chair), T. S. Lay (committee member).
Subjects/Keywords: Electro-absorption; Photocurrent; band filling effect
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share





❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Fan, H. (2001). Photocurrent and Electroabsorption Spectroscopy for Semiconductor Quantum Well Structures. (Thesis). NSYSU. Retrieved from http://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0710101-144722
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Chicago Manual of Style (16th Edition):
Fan, Hsiang-Pin. “Photocurrent and Electroabsorption Spectroscopy for Semiconductor Quantum Well Structures.” 2001. Thesis, NSYSU. Accessed March 01, 2021.
http://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0710101-144722.
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
MLA Handbook (7th Edition):
Fan, Hsiang-Pin. “Photocurrent and Electroabsorption Spectroscopy for Semiconductor Quantum Well Structures.” 2001. Web. 01 Mar 2021.
Vancouver:
Fan H. Photocurrent and Electroabsorption Spectroscopy for Semiconductor Quantum Well Structures. [Internet] [Thesis]. NSYSU; 2001. [cited 2021 Mar 01].
Available from: http://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0710101-144722.
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Council of Science Editors:
Fan H. Photocurrent and Electroabsorption Spectroscopy for Semiconductor Quantum Well Structures. [Thesis]. NSYSU; 2001. Available from: http://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0710101-144722
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Colorado School of Mines
24.
Theingi, San.
Direct measure of band edge optical absorption of silicon nanostructures using photothermal deflection spectroscopy.
Degree: MS(M.S.), Physics, 2015, Colorado School of Mines
URL: http://hdl.handle.net/11124/20271
► Quantum confined silicon nanoparticles (Si-NPs) are a promising material for optoelectronic applications. In this thesis, I studied the band edge optical absorption of free standing…
(more)
▼ Quantum confined silicon nanoparticles (Si-NPs) are a promising material for optoelectronic applications. In this thesis, I studied the
band edge optical
absorption of free standing Si-NPs and Si-NPs in an amorphous silicon matrix, a composite material also known as nano-crystalline silicon (nc-Si:H). In general, it is difficult to directly observe the
absorption threshold in these materials because of silicon’s low
absorption coefficient. For this study,
absorption was measured using photothermal deflection spectroscopy (PDS). PDS is a highly sensitive technique which can directly measure the optical
absorption of materials through the generated heat. The first part of the thesis focuses on the structural and optical properties of size varied free standing Si-NPs. Si-NPs were plasma synthesized and the size control was achieved by using a silicon etchant gas. Both photoluminescence (PL) and PDS
absorption spectra showed a blue shift with decreasing Si-NP size. An important outcome from this study is that a ~320 meV difference between the PL peak and
absorption edge was observed which indicates that PL is a defect related process. The second part of the thesis presents the optical
absorption of nc-Si:H as a function of crystal volume fraction (Xc). A low energy enhancement in
absorption relative to amorphous silicon by itself is seen in the material with high Xc. In addition, two different bandgaps, one close to amorphous silicon and another close to bulk crystalline silicon, were extracted from this material which indicates that the enhancement in
absorption is due to optical transitions directly involving Si-NPs. Based on the energy of the
absorption, softening of the quantum confinement when Si-NPs are imbedded in an amorphous silicon matrix is confirmed.
Advisors/Committee Members: Collins, Reuben T. (advisor), Taylor, P. C. (Philip Craig), 1942- (committee member), Krishna, Lakshmi (committee member).
Subjects/Keywords: nanocrystalline silicon; photothermal deflection spectroscopy; band edge absorption; silicon nanoparticles; optical properties
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share





❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Theingi, S. (2015). Direct measure of band edge optical absorption of silicon nanostructures using photothermal deflection spectroscopy. (Masters Thesis). Colorado School of Mines. Retrieved from http://hdl.handle.net/11124/20271
Chicago Manual of Style (16th Edition):
Theingi, San. “Direct measure of band edge optical absorption of silicon nanostructures using photothermal deflection spectroscopy.” 2015. Masters Thesis, Colorado School of Mines. Accessed March 01, 2021.
http://hdl.handle.net/11124/20271.
MLA Handbook (7th Edition):
Theingi, San. “Direct measure of band edge optical absorption of silicon nanostructures using photothermal deflection spectroscopy.” 2015. Web. 01 Mar 2021.
Vancouver:
Theingi S. Direct measure of band edge optical absorption of silicon nanostructures using photothermal deflection spectroscopy. [Internet] [Masters thesis]. Colorado School of Mines; 2015. [cited 2021 Mar 01].
Available from: http://hdl.handle.net/11124/20271.
Council of Science Editors:
Theingi S. Direct measure of band edge optical absorption of silicon nanostructures using photothermal deflection spectroscopy. [Masters Thesis]. Colorado School of Mines; 2015. Available from: http://hdl.handle.net/11124/20271
25.
Brigiane Margonari Longui.
Fotossíntese e relações hídricas de espécies de Eucalyptus sp. submetidas a diferentes regimes hídricos.
Degree: 2007, HACKEADO! By @PACKETXGROUP
URL: http://tede.unoeste.br/tede/tde_busca/arquivo.php?codArquivo=107
► A crescente demanda de produtos florestais tem levado as empresas brasileiras que realizam reflorestamento com espécies do gênero Eucalyptus a uma busca por maior produtividade…
(more)
▼ A crescente demanda de produtos florestais tem levado as empresas brasileiras que realizam reflorestamento com espécies do gênero Eucalyptus a uma busca por maior produtividade devido a sua utilização para celulose, papel e carvão. Um dos principais fatores limitante da produção agrícola é falta de água, que inibe vários processos fisiológicos nas plantas. Este trabalho teve por objetivo estudar os efeitos da deficiência hídrica sobre a fisiologia de plântulas de quatro espécies de Eucalyptus: E. citriodora, E. pellita, E. urograndis e E. grandis, visando obter informações sobre a susceptibilidade das plantas ao déficit hídrico na fase inicial de seu desenvolvimento que é um período crítico para a implantação de povoamentos florestais. As plântulas foram expostas a três regimes de irrigação, baseados na evaporação de um mini-tanque classe A com reposição de 100, 50 e 25 % da lâmina de água, das quais foram avaliadas em relação as trocas gasosas, fluorescência da clorofila a, conteúdo de clorofila e potencial de água foliar. Observou-se que as espécies de E.pellita e E. citriodora foram as mais tolerantes ao défict hídrico imposto pelo regime de 50% de reposição da lâmina de água. Entretanto o regime com 25% afetou as espécies de forma similar
The growing demand for forest products has led Brazilian reflorestation companies that work out reforestation with Eucalyptus to a search for higher productivity due to their use for cellulose, paper and chancoal. One of the most limiting factors for agricultural production is the water deficit, which inhibits several physiological process in plants. This work was aimed to study the effects of water deficit on the physiology of seedlings of four species Eucalyptus: E. citriodora, E. pellita, E. urograndis e E. grandis, looking for information about plants susceptibility at water deficit in the initial phase their of development with is a critical period for the installation of forest. The seedlings were exposed to three irrigation schemes, based on class A evaporation pan with replacement of 100, 50 and 25% of the water level, which were evaluated by gas exchange, chlorophyll fluorescence and content leaf water potential. It was observed that E. pellita and E.citrodora were more tolerant to level water imposed by the regime of 50% of replacement of the water depth. Meanwhile the regime with 25% effected the species so similar
Advisors/Committee Members: Gustavo Maia Souza, Nelson Barbosa Machado Neto, Rafael Vasconcelos Ribeiro.
Subjects/Keywords: eucalyptus; Water depth; fotossíntese; eucalipto; Deficiência hídrica; AGRONOMIA; photosynthesis
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share





❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Longui, B. M. (2007). Fotossíntese e relações hídricas de espécies de Eucalyptus sp. submetidas a diferentes regimes hídricos. (Thesis). HACKEADO! By @PACKETXGROUP. Retrieved from http://tede.unoeste.br/tede/tde_busca/arquivo.php?codArquivo=107
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Chicago Manual of Style (16th Edition):
Longui, Brigiane Margonari. “Fotossíntese e relações hídricas de espécies de Eucalyptus sp. submetidas a diferentes regimes hídricos.” 2007. Thesis, HACKEADO! By @PACKETXGROUP. Accessed March 01, 2021.
http://tede.unoeste.br/tede/tde_busca/arquivo.php?codArquivo=107.
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
MLA Handbook (7th Edition):
Longui, Brigiane Margonari. “Fotossíntese e relações hídricas de espécies de Eucalyptus sp. submetidas a diferentes regimes hídricos.” 2007. Web. 01 Mar 2021.
Vancouver:
Longui BM. Fotossíntese e relações hídricas de espécies de Eucalyptus sp. submetidas a diferentes regimes hídricos. [Internet] [Thesis]. HACKEADO! By @PACKETXGROUP; 2007. [cited 2021 Mar 01].
Available from: http://tede.unoeste.br/tede/tde_busca/arquivo.php?codArquivo=107.
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Council of Science Editors:
Longui BM. Fotossíntese e relações hídricas de espécies de Eucalyptus sp. submetidas a diferentes regimes hídricos. [Thesis]. HACKEADO! By @PACKETXGROUP; 2007. Available from: http://tede.unoeste.br/tede/tde_busca/arquivo.php?codArquivo=107
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Texas A&M University
26.
Okeke, Tobenna.
Simulation and Economic Screening of Improved Oil Recovery Methods with Emphasis on Injection Profile Control Including Waterflooding, Polymer Flooding and a Thermally Activated Deep Diverting Gel.
Degree: MS, Petroleum Engineering, 2012, Texas A&M University
URL: http://hdl.handle.net/1969.1/ETD-TAMU-2012-05-10765
► The large volume of water produced during the extraction of oil presents a significant problem due to the high cost of disposal in an environmentally…
(more)
▼ The large volume of
water produced during the extraction of oil presents a significant problem due to the high cost of disposal in an environmentally friendly manner. On average, an estimated seven barrels of
water is produced per barrel of oil in the US alone and the associated treatment and disposal cost is an estimated $5-10 billion. Besides making oil-
water separation more complex, produced
water also causes problems such as corrosion in the wellbore, decline in production rate and ultimate recovery of hydrocarbons and premature well or field abandonment.
Water production can be more problematic during waterflooding in a highly heterogeneous reservoir with vertical communication between layers leading to unevenness in the flood front, cross-flow between high and low permeability layers and early
water breakthrough from high permeability layers. Some of the different technologies that can be used to counteract this involve reducing the mobility of
water or using a permeability block in the higher permeability, swept zones.
This research was initiated to evaluate the potential effectiveness of the latter method, known as deep diverting gels (DDG) to plug thief zones deep within the reservoir and far from the injection well. To evaluate the performance of DDG, its injection was modeled, sensitivities run for a range of reservoir characteristics and conditions and an economic analysis was also performed. The performance of the DDG was then compared to other recovery methods, specifically waterflooding and polymer flooding from a technical and economic perspective.
A literature review was performed on the background of injection profile control methods, their respective designs and technical capabilities. For the methods selected, Schlumberger's Eclipse software was used to simulate their behavior in a reservoir using realistic and simplified assumptions of reservoir characteristics and fluid properties. The simulation results obtained were then used to carry out economic analyses upon which conclusions and recommendations are based. These results show that the factor with the largest impact on the economic success of this method versus a polymer flood was the amount of incremental oil produced. By comparing net present values of the different methods, it was found that the polymer flood was the most successful with the highest NPV for each configuration followed by DDG.
Advisors/Committee Members: Lane, Robert H. (advisor), Nasr-El-Din, Hisham A. (committee member), Sun, Yuefeng (committee member).
Subjects/Keywords: Reservoir simulation; in-depth profile modification; water production
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share





❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Okeke, T. (2012). Simulation and Economic Screening of Improved Oil Recovery Methods with Emphasis on Injection Profile Control Including Waterflooding, Polymer Flooding and a Thermally Activated Deep Diverting Gel. (Masters Thesis). Texas A&M University. Retrieved from http://hdl.handle.net/1969.1/ETD-TAMU-2012-05-10765
Chicago Manual of Style (16th Edition):
Okeke, Tobenna. “Simulation and Economic Screening of Improved Oil Recovery Methods with Emphasis on Injection Profile Control Including Waterflooding, Polymer Flooding and a Thermally Activated Deep Diverting Gel.” 2012. Masters Thesis, Texas A&M University. Accessed March 01, 2021.
http://hdl.handle.net/1969.1/ETD-TAMU-2012-05-10765.
MLA Handbook (7th Edition):
Okeke, Tobenna. “Simulation and Economic Screening of Improved Oil Recovery Methods with Emphasis on Injection Profile Control Including Waterflooding, Polymer Flooding and a Thermally Activated Deep Diverting Gel.” 2012. Web. 01 Mar 2021.
Vancouver:
Okeke T. Simulation and Economic Screening of Improved Oil Recovery Methods with Emphasis on Injection Profile Control Including Waterflooding, Polymer Flooding and a Thermally Activated Deep Diverting Gel. [Internet] [Masters thesis]. Texas A&M University; 2012. [cited 2021 Mar 01].
Available from: http://hdl.handle.net/1969.1/ETD-TAMU-2012-05-10765.
Council of Science Editors:
Okeke T. Simulation and Economic Screening of Improved Oil Recovery Methods with Emphasis on Injection Profile Control Including Waterflooding, Polymer Flooding and a Thermally Activated Deep Diverting Gel. [Masters Thesis]. Texas A&M University; 2012. Available from: http://hdl.handle.net/1969.1/ETD-TAMU-2012-05-10765
27.
Lundberg, Malin.
Habitatpreferenser hos tjockskalig målarmussla (Unio crassus) med avseende på vattendjup och beskuggning.
Degree: The Institute of Technology, 2012, Linköping UniversityLinköping University
URL: http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-78961
► The thick-shelled river mussel (Unio crassus) is a red listed species classified as Endangered (EN) and is also considered within the Habitats Directive. The…
(more)
▼ The thick-shelled river mussel (Unio crassus) is a red listed species classified as Endangered (EN) and is also considered within the Habitats Directive. The distribution in Sweden is fragmented and it is mostly occurring in the south eastern parts. We investigated the presence of Unio crassus in a section of the stream Storån, Östergötland County, from Falerum to the inflow into Lake Åkervristen. The environmental parameters investigated were water depth, bottom substrate, shading, water velocity and the slope over the water surface. In this thesis I have focused mainly on water depth and shading, comparing sites with and without mussels. In addition, I used a multivariate PCA analysis to evaluate all parameters together. The water depth was significantly larger in habitats with mussels than in those without. Shading varied from 5 to 80 %, but there was no significant difference between habitats with and without mussels. There was no correlation between water depth and mussel density and not between shading and mussel density either. The multivariate PCA analysis showed that the habitats with and without mussels were different from with regard to the PC1 axis, which included water depth, bottom substrate and water velocity. Alone, the water depth is not enough to predict the presence of Unio crassus in the stream, and it is likely that more parameters need to be considered. Previous work indicate that the more parameters and habitats that are investigated, the more confident results can be stated of which habitats Unio crassus prefer.
Subjects/Keywords: Unio crassus; thick-shelled river mussel; habitat preferences; water depth; shading
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share





❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Lundberg, M. (2012). Habitatpreferenser hos tjockskalig målarmussla (Unio crassus) med avseende på vattendjup och beskuggning. (Thesis). Linköping UniversityLinköping University. Retrieved from http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-78961
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Chicago Manual of Style (16th Edition):
Lundberg, Malin. “Habitatpreferenser hos tjockskalig målarmussla (Unio crassus) med avseende på vattendjup och beskuggning.” 2012. Thesis, Linköping UniversityLinköping University. Accessed March 01, 2021.
http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-78961.
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
MLA Handbook (7th Edition):
Lundberg, Malin. “Habitatpreferenser hos tjockskalig målarmussla (Unio crassus) med avseende på vattendjup och beskuggning.” 2012. Web. 01 Mar 2021.
Vancouver:
Lundberg M. Habitatpreferenser hos tjockskalig målarmussla (Unio crassus) med avseende på vattendjup och beskuggning. [Internet] [Thesis]. Linköping UniversityLinköping University; 2012. [cited 2021 Mar 01].
Available from: http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-78961.
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Council of Science Editors:
Lundberg M. Habitatpreferenser hos tjockskalig målarmussla (Unio crassus) med avseende på vattendjup och beskuggning. [Thesis]. Linköping UniversityLinköping University; 2012. Available from: http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-78961
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

University of Melbourne
28.
Zhang, Zheng.
The role of plants in green roof rainfall retention.
Degree: 2019, University of Melbourne
URL: http://hdl.handle.net/11343/225847
► Increasing urbanisation and associated impervious surfaces have negative impacts on humans and the environment. Therefore, more resilient and sustainable stormwater management that mimics the natural…
(more)
▼ Increasing urbanisation and associated impervious surfaces have negative impacts on humans and the environment. Therefore, more resilient and sustainable stormwater management that mimics the natural predevelopment hydrology cycle to protect urban water sources and reduce urban flooding is required. Contributing to this approach, green roofs can partly compensate the loss of natural landscapes and mitigate runoff.
Green roof plant selection has mostly been limited to species with the ability to survive extreme environmental conditions, typically Sedum species. However, green roofs with these species planted in monoculture may not be efficient in terms of rainfall retention. Selecting plants with water use plasticity and increasing substrate depth may improve green roof hydrological performance in these highly variable environments, without substantially introducing drought risk. To examine this, two experiments were conducted. The first, a 17-month controlled rainfall experiment, was examined in two studies: 1) to understand the overall effect of plant water use strategies and of the mixture of plants within water use plasticity on retention, and 2) to understand the mechanisms driving rainfall retention. The second experiment, a 27-month green roof field study, examined the effect of increasing substrate depth on rainfall retention and plant drought stress.
Contrary to my initial hypotheses, plant species with water use plasticity did not always provide greater retention performance, compared with conservative succulent species. Retention performance of a plant mixture was dominated by key species and was not always greater than that of monocultures. The effects of plant treatment on retention performance were significant for medium and large rainfall events, but minor for small rainfall events. Rainfall characteristics and available storage of substrates before rainfall events strongly drove retention performance. Although the effects of ET were well understood and shown to be as the key factor for green roof retention, ‘Non-ET’ plant effects (i.e., the reduction in storage capacity, either via preferential flow, or roots occupying storage volume) can change the relative importance of ET. That is, the maximum storage capacity becomes a more important driver of available storage in the substrate compared with the ability of plants to deplete that stored moisture. Increasing substrate depth only marginally improved retention performance, however, deeper substrates significantly reduced the period of time plants were exposed to drought stress.
The results showed that green roofs perform well for retention (average ~73% in total study period; average ~91% in per-event), particularly in warm and dry climates with a large proportion of small rainfall events. Selection of plants with water use plasticity and the use of mixtures was less important for improving retention than climate. However, when planting treatments were compared, root-induced preferential flow paths were shown to reduce the water storage…
Subjects/Keywords: green roof; retention; evapotranspiration; plant water use; substrate depth; drought stress
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share





❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Zhang, Z. (2019). The role of plants in green roof rainfall retention. (Doctoral Dissertation). University of Melbourne. Retrieved from http://hdl.handle.net/11343/225847
Chicago Manual of Style (16th Edition):
Zhang, Zheng. “The role of plants in green roof rainfall retention.” 2019. Doctoral Dissertation, University of Melbourne. Accessed March 01, 2021.
http://hdl.handle.net/11343/225847.
MLA Handbook (7th Edition):
Zhang, Zheng. “The role of plants in green roof rainfall retention.” 2019. Web. 01 Mar 2021.
Vancouver:
Zhang Z. The role of plants in green roof rainfall retention. [Internet] [Doctoral dissertation]. University of Melbourne; 2019. [cited 2021 Mar 01].
Available from: http://hdl.handle.net/11343/225847.
Council of Science Editors:
Zhang Z. The role of plants in green roof rainfall retention. [Doctoral Dissertation]. University of Melbourne; 2019. Available from: http://hdl.handle.net/11343/225847

Virginia Tech
29.
Cubas Suazo, Francisco Jose.
An Investigation into the Effects of an External Electron Acceptor on Nutrient Cycling at the Sediment-Water Interface of the Occoquan Reservoir.
Degree: PhD, Civil Engineering, 2012, Virginia Tech
URL: http://hdl.handle.net/10919/37388
► Water supply reservoirs are often subject to accelerated nutrient enrichment from urban sources. Cultural eutrophication due to such enrichment requires the development of efficient management…
(more)
▼ Water supply reservoirs are often
subject to accelerated nutrient enrichment from urban sources. Cultural eutrophication due to such enrichment requires the development of efficient management and remediation strategies to protect drinking
water sources. This study investigates the effects of using nitrate as part of a management strategy to control nutrient cycling in the Occoquan Reservoir in northern Virginia, USA. A novel aspect of the study is that the reservoir is part of an indirect potable reuse system where the source of nitrate is the product
water from an advanced
water reclamation facility (WRF).
Field and laboratory studies showed that nitrate at a concentration greater than 1 mg/L N was effective in controlling the release of phosphorus, iron, and manganese from the sediments after the depletion of oxygen from the hypolimnetic waters of the reservoir. However, when the nitrate concentration above the sediment-
water interface was less than 1 mg/L N, phosphorus, iron, and manganese release from the sediments was evident. Experiments revealed that the presence of nitrate decreased sediment ammonium release, but did not completely prevent it during anoxic periods. Results also showed that changes in the effective
depth (ED) value along the length of the reservoir promoted higher denitrification rates in the upper reaches of the reservoir, thereby decreasing the downstream transport of nitrate. During periods of hypolimnetic anoxia, a nitrate-N input from the WRF of at least 10 mg/L N is needed to maintain an oxidized environment above the sediment-
water interface. Therefore, decreasing the nitrate input to the reservoir will likely result in the deterioration of the surface
water quality in the reservoir.
Finally, the ED concept was proven to be an effective method to simulate different segments of the reservoir in laboratory-scaled experiments. Similarities between the field and laboratory results suggests that the environment that existed in the waters of the reservoir was closely replicated in the experimental setup, and provides confidence that laboratory results can be extrapolated to natural reservoir conditions.
Advisors/Committee Members: Berry, Duane F. (committee member), Godrej, Adil N. (committee member), Holbrook, R. David (committee member), Grizzard, Thomas J. (committeecochair), Novak, John T. (committeecochair).
Subjects/Keywords: water reuse; sediments; nitrate; phosphorus; ammonium; effective depth
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share





❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Cubas Suazo, F. J. (2012). An Investigation into the Effects of an External Electron Acceptor on Nutrient Cycling at the Sediment-Water Interface of the Occoquan Reservoir. (Doctoral Dissertation). Virginia Tech. Retrieved from http://hdl.handle.net/10919/37388
Chicago Manual of Style (16th Edition):
Cubas Suazo, Francisco Jose. “An Investigation into the Effects of an External Electron Acceptor on Nutrient Cycling at the Sediment-Water Interface of the Occoquan Reservoir.” 2012. Doctoral Dissertation, Virginia Tech. Accessed March 01, 2021.
http://hdl.handle.net/10919/37388.
MLA Handbook (7th Edition):
Cubas Suazo, Francisco Jose. “An Investigation into the Effects of an External Electron Acceptor on Nutrient Cycling at the Sediment-Water Interface of the Occoquan Reservoir.” 2012. Web. 01 Mar 2021.
Vancouver:
Cubas Suazo FJ. An Investigation into the Effects of an External Electron Acceptor on Nutrient Cycling at the Sediment-Water Interface of the Occoquan Reservoir. [Internet] [Doctoral dissertation]. Virginia Tech; 2012. [cited 2021 Mar 01].
Available from: http://hdl.handle.net/10919/37388.
Council of Science Editors:
Cubas Suazo FJ. An Investigation into the Effects of an External Electron Acceptor on Nutrient Cycling at the Sediment-Water Interface of the Occoquan Reservoir. [Doctoral Dissertation]. Virginia Tech; 2012. Available from: http://hdl.handle.net/10919/37388
30.
Nael-Redolfi, Jennifer.
Absorption d'eau des granulats poreux : mesure et conséquences sur la formulation des mortiers et des bétons : Water absorption of porous aggregates : measurement and consequences on cementitious materials mix-designs.
Degree: Docteur es, Sciences des Matériaux, 2016, Université Paris-Est
URL: http://www.theses.fr/2016PESC1008
► Face à la pénurie de granulats alluvionnaires, l’utilisation de granulats issus de roches massives est devenue systématique pour la formulation de mortiers ou de bétons.…
(more)
▼ Face à la pénurie de granulats alluvionnaires, l’utilisation de granulats issus de roches massives est devenue systématique pour la formulation de mortiers ou de bétons. Ainsi, la part des granulats concassés de roche massive a fortement augmenté lors de la dernière décennie alors que, pour des raisons normatives dans le domaine du recyclage, la part des granulats recyclés est amenée à le faire lors de la prochaine. La relation de ces granulats avec l’eau et, plus particulièrement, de leur fraction fine est beaucoup plus complexe que celle de leurs prédécesseurs, les granulats naturels alluvionnaires. Ces particules plus poreuses sont à même d’absorber des quantités d’eau plus importantes mais elles le font, par ailleurs, avec des cinétiques peu comparables. Pour contrôler l’absorption d’eau des granulats poreux, il est d’usage de compenser l’absorption des granulats au moment de la formulation après avoir caractériser les granulats. Cependant, l’angularité et la rugosité de surface des granulats recyclés imposent d’adapter les normes actuelles utilisées pour la caractérisation de granulats alluvionnaires. Dans ce travail de thèse, nous proposons de mettre en place différentes méthodes pour caractériser les granulats concassés et recyclés. Dans un premier temps, nous étudions la méthode consistant à déterminer l’absorption d’eau par séchage de granulats saturés et nous montrons que cette méthode est plus particulièrement adaptée dans le cas de granulats de morphologie anguleuse. En effet, nous montrons que la baisse du taux de séchage est bien associée au passage de l’évaporation inter-grains à l’évaporation de l’eau intra-grains et que cette méthode permet une bonne estimation de l’absorption de granulats fins poreux. Dans un second temps, nous montrons que l’étude de la perte de rhéologie d’un mortier, à travers des mesures d’étalement, permet de déterminer l’absorption d’eau de granulats poreux. Nous étendons, dans une deuxième partie, notre étude aux conséquences inhérentes à l’utilisation de ces granulats dans un nouveau matériau cimentaire. Nous observons, à l’aide de la spectrométrie RMN, les transferts d’eau de la pâte de ciment fraîche vers les granulats poreux. Nous observons que l’absorption d’eau de granulats recyclés peut être réduite dans une pâte de ciment fraîche par rapport à l’absorption dans l’eau pure. Nous montrons que le prétraitement thermique généralement imposé en laboratoire aux granulats recyclés impacte la microstructure par la déshydratation d’hydrates tels que les aluminates et les silicates de calcium. En présence de la solution interstitielle de la pâte de ciment, la réhydratation des anhydres peut amener à une précipitation de calcium dans la porosité qui limite l’absorption par colmatage des pores
The environmental threat on non-renewable resources such as rounded natural aggregates strongly affects the materials available for the production of mortar or concrete. This leads to an increase in the relative contribution of alternative resources such as recycled or crushed…
Advisors/Committee Members: Roussel, Nicolas (thesis director).
Subjects/Keywords: Granulats; Recyclage; Absorption d'eau; Rhéologie; Séchage; Rmn; Aggregates; Recycling; Water absorption; Rheology; Drying; Nmr
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share





❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Nael-Redolfi, J. (2016). Absorption d'eau des granulats poreux : mesure et conséquences sur la formulation des mortiers et des bétons : Water absorption of porous aggregates : measurement and consequences on cementitious materials mix-designs. (Doctoral Dissertation). Université Paris-Est. Retrieved from http://www.theses.fr/2016PESC1008
Chicago Manual of Style (16th Edition):
Nael-Redolfi, Jennifer. “Absorption d'eau des granulats poreux : mesure et conséquences sur la formulation des mortiers et des bétons : Water absorption of porous aggregates : measurement and consequences on cementitious materials mix-designs.” 2016. Doctoral Dissertation, Université Paris-Est. Accessed March 01, 2021.
http://www.theses.fr/2016PESC1008.
MLA Handbook (7th Edition):
Nael-Redolfi, Jennifer. “Absorption d'eau des granulats poreux : mesure et conséquences sur la formulation des mortiers et des bétons : Water absorption of porous aggregates : measurement and consequences on cementitious materials mix-designs.” 2016. Web. 01 Mar 2021.
Vancouver:
Nael-Redolfi J. Absorption d'eau des granulats poreux : mesure et conséquences sur la formulation des mortiers et des bétons : Water absorption of porous aggregates : measurement and consequences on cementitious materials mix-designs. [Internet] [Doctoral dissertation]. Université Paris-Est; 2016. [cited 2021 Mar 01].
Available from: http://www.theses.fr/2016PESC1008.
Council of Science Editors:
Nael-Redolfi J. Absorption d'eau des granulats poreux : mesure et conséquences sur la formulation des mortiers et des bétons : Water absorption of porous aggregates : measurement and consequences on cementitious materials mix-designs. [Doctoral Dissertation]. Université Paris-Est; 2016. Available from: http://www.theses.fr/2016PESC1008
◁ [1] [2] [3] [4] [5] … [1437] ▶
.