subject:(sweeper)

University of Surrey

1. Peel, Gareth. A general theory for channel brush design for street sweeping.

Degree: PhD, 2002, University of Surrey

URL: http://epubs.surrey.ac.uk/792198/ ; http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.250761

► The objective of this thesis is to develop an understanding of the brushing process for a road sweeper so that a theoretical model of the… (more)

▼ The objective of this thesis is to develop an understanding of the brushing process for a road sweeper so that a theoretical model of the process can be developed. The brush model has been confined to the kerb operating channel brush that usually sweeps about 80% of the debris on the road in the region of the kerb. The other 20% is swept by a roller brush beneath the vehicle. This has not been included in the study. A concept for a semi-autonomous road sweeping vehicle has also been proposed in order to sweep debris efficiently with minimum fatigue for the vehicle driver, although the debris sensing and control system have not been developed in this thesis. The metal tines of road sweeping brushes are usually rectangular in section (unlike cleaning brushes which are circular in section), giving rise to two commercial brush types. These are the flicking brush (major axis in the radial direction) and cutting brush (major axis in the tangential direction). A theoretical steady-state model of these two brushes has been developed which allows the calculation of brush axial loads, torques and tine deflection geometry as the brush rotates. The theoretical model has been validated experimentally within acceptable limits although this does require an experimental choice of the co-efficient of friction between the tines and the ground, usually between 0.6 and 0.7 for commercial brushes sweeping on concrete and tarmacadam surfaces. A dominant feature of the brush characteristics is the tine wear, as the brush stiffness increases over 120% as the tine shortens by 40%, which is the recommended minimum length taking into account brushing efficiency and damage to the road surface. The model can also be used as a tool to design new brushes so that, for example, by rotating the tine by 30 to 40° from the cutting brush configuration a 20% improvement in mechanical efficiency is predicted. In order to assess the mechanism of debris removal from the road and its subsequent collection by the vacuum unit, the brush model has been incorporated into a brush sweep-gear linkage used by commercial vehicles to track the edge of the kerb. It has been shown that a constant brush contact arc on the road can be maintained by adjusting the brush angle of attack and brush height and that this relationship is independent of the vehicle speed and brush linkage with respect to the kerb. Under these contact conditions efficient sweeping may be expected. In the case of the Johnston 600 sweeping vehicle the brush contact arc angle is 150°. This parameter is used as the output criterion for automatic control schemes that have been proposed to improve brushing efficiency and reduce driver fatigue. These will require the development of an on-line brush height sensor that can also measure brush wear.

Subjects/Keywords: 628; Road sweeper

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Peel, G. (2002). A general theory for channel brush design for street sweeping. (Doctoral Dissertation). University of Surrey. Retrieved from http://epubs.surrey.ac.uk/792198/ ; http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.250761

Chicago Manual of Style (16^th Edition):

Peel, Gareth. “A general theory for channel brush design for street sweeping.” 2002. Doctoral Dissertation, University of Surrey. Accessed March 01, 2021. http://epubs.surrey.ac.uk/792198/ ; http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.250761.

MLA Handbook (7^th Edition):

Peel, Gareth. “A general theory for channel brush design for street sweeping.” 2002. Web. 01 Mar 2021.

Vancouver:

Peel G. A general theory for channel brush design for street sweeping. [Internet] [Doctoral dissertation]. University of Surrey; 2002. [cited 2021 Mar 01]. Available from: http://epubs.surrey.ac.uk/792198/ ; http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.250761.

Council of Science Editors:

Peel G. A general theory for channel brush design for street sweeping. [Doctoral Dissertation]. University of Surrey; 2002. Available from: http://epubs.surrey.ac.uk/792198/ ; http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.250761

University of Illinois – Urbana-Champaign

2. Tucek, Joseph. Addressing production run failures dynamically.

Degree: PhD, 0112, 2012, University of Illinois – Urbana-Champaign

URL: http://hdl.handle.net/2142/29710

► The high complexity of modern software, and our pervasive reliance on that software, has made the problems of software reliability increasingly important. Yet despite advances… (more)

▼ The high complexity of modern software, and our pervasive reliance on that software, has made the problems of software reliability increasingly important. Yet despite advances in software engineering practice, pre-release testing, and automated analysis, reports of highsoftware engineering practice, pre-release testing, and automated analysis, reports of highprofile production failures are still common. This dissertation proposes several run-time techniques to analyze and alleviate software failures dynamically, during production runs. The first technique is low overhead checkpoint, rollback, and re-execution. By allowing a window of time in which a period of execution can be relived, low overhead checkpointing allows expensive analytical steps to be saved for only when they are needed. The second technique is a collection of dynamically insertable run-time analysis tools, which can use information gleaned over multiple analytical runs of the same execution to incrementally build picture of a production run failure more completely than any individual analysis could. Finally, based on my experience with the behavior of programs under failure, and the underlying causes of said failures, this dissertation introduces the concept of, and provides a run time which supports, delta execution. Delta execution is the process of running more than one instance or version of a program, while sharing the majority of issued instructions and state. This dissertation uses delta execution specifically to validate software patches at production run time. These three techniques have been demonstrated in three implemented systems supporting various end-level reliability goals. The first system, called Sweeper, is a run-time defensive system against security bugs. Low overhead checkpointing captures system state until an intrusion tripwire notices an anomaly. The system can then roll back to perform a more thorough (and expensive) analysis of past execution to determine the nature of the exploit. Because of the low overhead of the initial checkpointing, the barriers to widespread deployment are low. Further, because Sweeper can still perform more complex analysis, there is the opportunity to generate strong protective measures, like vulnerability specific execution filters (or VSEFs), which can effectively stop a worm infestation. The implemented Sweeper system imposes only 1% overhead in ordinary operation, and can generate an effective protective measure in only 60 milliseconds. From an analytic model, this is sufficient to minimize the spread of a fast worm to only 5% of the susceptible hosts, even for a worm which spreads 10,000 times faster than any previously observed in the wild. The second system is called Triage. Rather than improving reliability by improving security, Triage attempts to enable the improvement of the underlying code by automating failure diagnosis of production run systems. Production run failures are difficult to address. Such failures commonly are irreproducible in a development environment due to… Advisors/Committee Members: Zhou, Yuanyuan (advisor), Zhou, Yuanyuan (committee member), Sanders, William H. (committee member), King, Samuel T. (committee member), Song, Dawn (committee member).

Subjects/Keywords: software reliability; re-execution; operating systems; delta execution; debugging; flash worm; Triage; Sweeper

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Tucek, J. (2012). Addressing production run failures dynamically. (Doctoral Dissertation). University of Illinois – Urbana-Champaign. Retrieved from http://hdl.handle.net/2142/29710

Chicago Manual of Style (16^th Edition):

Tucek, Joseph. “Addressing production run failures dynamically.” 2012. Doctoral Dissertation, University of Illinois – Urbana-Champaign. Accessed March 01, 2021. http://hdl.handle.net/2142/29710.

MLA Handbook (7^th Edition):

Tucek, Joseph. “Addressing production run failures dynamically.” 2012. Web. 01 Mar 2021.

Vancouver:

Tucek J. Addressing production run failures dynamically. [Internet] [Doctoral dissertation]. University of Illinois – Urbana-Champaign; 2012. [cited 2021 Mar 01]. Available from: http://hdl.handle.net/2142/29710.

Council of Science Editors:

Tucek J. Addressing production run failures dynamically. [Doctoral Dissertation]. University of Illinois – Urbana-Champaign; 2012. Available from: http://hdl.handle.net/2142/29710

Brno University of Technology

3. Tomášková, Lucie. Design elektrického zametacího stroje pro sedící obsluhu: Design of Electric Ride-On Sweeper.

Degree: 2019, Brno University of Technology

URL: http://hdl.handle.net/11012/83494

► The topic of my diploma thesis is the design of electric ride-on sweeper. At first, the product is analyzed from a designer and technical aspect.… (more)

Subjects/Keywords: Design; zametací stroj; úklid; zametání; sedící obsluha; baterie; Design; sweeper; cleaning; sweeping; seated operator; battery

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Tomášková, L. (2019). Design elektrického zametacího stroje pro sedící obsluhu: Design of Electric Ride-On Sweeper. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/83494

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Tomášková, Lucie. “Design elektrického zametacího stroje pro sedící obsluhu: Design of Electric Ride-On Sweeper.” 2019. Thesis, Brno University of Technology. Accessed March 01, 2021. http://hdl.handle.net/11012/83494.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Tomášková, Lucie. “Design elektrického zametacího stroje pro sedící obsluhu: Design of Electric Ride-On Sweeper.” 2019. Web. 01 Mar 2021.

Vancouver:

Tomášková L. Design elektrického zametacího stroje pro sedící obsluhu: Design of Electric Ride-On Sweeper. [Internet] [Thesis]. Brno University of Technology; 2019. [cited 2021 Mar 01]. Available from: http://hdl.handle.net/11012/83494.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Tomášková L. Design elektrického zametacího stroje pro sedící obsluhu: Design of Electric Ride-On Sweeper. [Thesis]. Brno University of Technology; 2019. Available from: http://hdl.handle.net/11012/83494

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

4. Mahdal, Martin. Design městské úklidové jednotky: Design of urban clearing unit.

Degree: 2019, Brno University of Technology

URL: http://hdl.handle.net/11012/2202

► The subject of graduation theses is design of urban cleaning unit. The machine belongs to the category of self-propelled work equipment. The primary purpose is… (more)

Subjects/Keywords: Pracovní technika; čistící vozidlo; design; funkce; Work equipment; street sweeper; design; function

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Mahdal, M. (2019). Design městské úklidové jednotky: Design of urban clearing unit. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/2202

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Mahdal, Martin. “Design městské úklidové jednotky: Design of urban clearing unit.” 2019. Thesis, Brno University of Technology. Accessed March 01, 2021. http://hdl.handle.net/11012/2202.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Mahdal, Martin. “Design městské úklidové jednotky: Design of urban clearing unit.” 2019. Web. 01 Mar 2021.

Vancouver:

Mahdal M. Design městské úklidové jednotky: Design of urban clearing unit. [Internet] [Thesis]. Brno University of Technology; 2019. [cited 2021 Mar 01]. Available from: http://hdl.handle.net/11012/2202.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Mahdal M. Design městské úklidové jednotky: Design of urban clearing unit. [Thesis]. Brno University of Technology; 2019. Available from: http://hdl.handle.net/11012/2202

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Mid Sweden University

5. Svedberg, Jens. Konceptutveckling av utrustning inom vägunderhåll : Lastbilsmonterad utrustning för rengöring av vägbana underoch bakom vägräcke.

Degree: Quality Management and Mechanical Engineering, 2020, Mid Sweden University

URL: http://urn.kb.se/resolve?urn=urn:nbn:se:miun:diva-39673

►

När landsvägar sopas rent från grus samlas inte alltiddetta upp utan sopas istället ned i diket, vid förekomstav vägräcken ackumuleras gruset över tid undervägräcket.… (more)

▼

När landsvägar sopas rent från grus samlas inte alltiddetta upp utan sopas istället ned i diket, vid förekomstav vägräcken ackumuleras gruset över tid undervägräcket. Detta leder till att avrinningen av vattenförsvåras vilket kan leda till att vattenmassor samlas påvägbanan, detta leder till en försämrad trafiksäkerhet.Arbetet med att avlägsna detta grus är idagtidskrävande och leder till att framkomligheten påvägen begränsas. På uppdrag av AB Mählers och Sönerskapades ett produktkoncept som skall kunna utföra ettförebyggande underhåll för att undvika det mertidskrävande arbete som utförs idag. Konceptet byggerpå två stycken roterande sopborstar som med enöverbryggande konstruktion placeras på vardera sidaav vägräcket. Konceptet avses att placeras på ettbefintligt sidoplogfäste som finns i AB Mähler & Sönerexisterande produktutbud. För att ta fram detta koncepthar olika metoder nyttjats: intervjuer med identifieradeintressenter har utförts, befintliga lösningar har söktsoch olika koncept har skapats. De genererade konceptenhar betygsatts och eliminerats tills ett koncept kvarstår.Detta koncept har itererats tre gånger för att söka olikalösningar på problemställningen.

When country roads are swept clean from gravel, thegravel is not always collected, but is instead sweptdown into the trench. In the presence of guardrails thegravel accumulates over time under the guardrail. Thismakes the drainage of water more difficult which canlead to water masses accumulating on the roadway,which leads to impaired road safety. The work ofremoving this gravel is today time-consuming and willlimit the accessibility off the road. On behalf of ABMählers and Söner, a product concept was created thatwill be able to carry out preventive maintenance toavoid the more time-consuming work being donetoday. The concept is based on two rotating brusheswhich with a bridging construction are placed on eachside of the guardrail. The concept is intended to beplaced on an mount for a snowplough that currentlyexists in AB Mähler & Söner's product range. Todevelop this concept, different methods have been used:interviews with identified stakeholders have beencarried out, existing solutions have been sought anddifferent concepts have been created. The generatedconcepts have been graded and eliminated until oneconcept remains. This concept has been iterated threetimes to seek different solutions to the problem.

Betyg 2020-07-27

Subjects/Keywords: Road maintenance; concept development; sweeper; truck equipment; Vägunderhåll; konceptutveckling; sopmaskin; lastbilsutrustning; Other Mechanical Engineering; Annan maskinteknik

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Svedberg, J. (2020). Konceptutveckling av utrustning inom vägunderhåll : Lastbilsmonterad utrustning för rengöring av vägbana underoch bakom vägräcke. (Thesis). Mid Sweden University. Retrieved from http://urn.kb.se/resolve?urn=urn:nbn:se:miun:diva-39673

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Svedberg, Jens. “Konceptutveckling av utrustning inom vägunderhåll : Lastbilsmonterad utrustning för rengöring av vägbana underoch bakom vägräcke.” 2020. Thesis, Mid Sweden University. Accessed March 01, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:miun:diva-39673.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Svedberg, Jens. “Konceptutveckling av utrustning inom vägunderhåll : Lastbilsmonterad utrustning för rengöring av vägbana underoch bakom vägräcke.” 2020. Web. 01 Mar 2021.

Vancouver:

Svedberg J. Konceptutveckling av utrustning inom vägunderhåll : Lastbilsmonterad utrustning för rengöring av vägbana underoch bakom vägräcke. [Internet] [Thesis]. Mid Sweden University; 2020. [cited 2021 Mar 01]. Available from: http://urn.kb.se/resolve?urn=urn:nbn:se:miun:diva-39673.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Svedberg J. Konceptutveckling av utrustning inom vägunderhåll : Lastbilsmonterad utrustning för rengöring av vägbana underoch bakom vägräcke. [Thesis]. Mid Sweden University; 2020. Available from: http://urn.kb.se/resolve?urn=urn:nbn:se:miun:diva-39673

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

6. Missel, Jonathan William. Active Space Debris Removal using Capture and Ejection.

Degree: PhD, Aerospace Engineering, 2013, Texas A&M University

URL: http://hdl.handle.net/1969.1/149391

► Low Earth Orbit is over-cluttered with rogue objects that threaten existing technological assets and interfere with allocating new ones. Traditional satellite missions are not efficient… (more)

Subjects/Keywords: Active; space; debris; removal; Sling-sat; sweeper

…permission from “Sling Satellite for Debris Removal with Aggie Sweeper” by Jonathan Missel and… …SlingSat Space Sweeper ” (4S ). 4S reclaims the fuel losses of a traditional mission by… …to the next object, in place of fuel. Space Sweeper is the mission architecture that… …Sweeper. The goal is to support feasibility of 4S ’s key principles through analysis, simulation… …HARDWARE Space Sweeper ’s specialized objectives impose many requirements on accompanying…

10 more images…

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Missel, J. W. (2013). Active Space Debris Removal using Capture and Ejection. (Doctoral Dissertation). Texas A&M University. Retrieved from http://hdl.handle.net/1969.1/149391

Chicago Manual of Style (16^th Edition):

Missel, Jonathan William. “Active Space Debris Removal using Capture and Ejection.” 2013. Doctoral Dissertation, Texas A&M University. Accessed March 01, 2021. http://hdl.handle.net/1969.1/149391.

MLA Handbook (7^th Edition):

Missel, Jonathan William. “Active Space Debris Removal using Capture and Ejection.” 2013. Web. 01 Mar 2021.

Vancouver:

Missel JW. Active Space Debris Removal using Capture and Ejection. [Internet] [Doctoral dissertation]. Texas A&M University; 2013. [cited 2021 Mar 01]. Available from: http://hdl.handle.net/1969.1/149391.

Council of Science Editors:

Missel JW. Active Space Debris Removal using Capture and Ejection. [Doctoral Dissertation]. Texas A&M University; 2013. Available from: http://hdl.handle.net/1969.1/149391

Brno University of Technology

7. Václavík, Lukáš. Studie strojů pro letní údržbu asfaltových komunikací: Study of machines for asphalt road maintenance in the summer.

Degree: 2018, Brno University of Technology

URL: http://hdl.handle.net/11012/6099

► This bachelor thesis is written as a exploration of facts and it is occupy with machines for summer maintenance of road. The thesis is divided… (more)

Subjects/Keywords: vodorovné dopravní značení; kropící vůz; zametací vůz; vysprávkový vůz; mobilní fréza; horizontal road markings; sprinkling vehicle; sweeper vehicle; repairing vehicle; mobile cutter

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Václavík, L. (2018). Studie strojů pro letní údržbu asfaltových komunikací: Study of machines for asphalt road maintenance in the summer. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/6099

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Václavík, Lukáš. “Studie strojů pro letní údržbu asfaltových komunikací: Study of machines for asphalt road maintenance in the summer.” 2018. Thesis, Brno University of Technology. Accessed March 01, 2021. http://hdl.handle.net/11012/6099.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Václavík, Lukáš. “Studie strojů pro letní údržbu asfaltových komunikací: Study of machines for asphalt road maintenance in the summer.” 2018. Web. 01 Mar 2021.

Vancouver:

Václavík L. Studie strojů pro letní údržbu asfaltových komunikací: Study of machines for asphalt road maintenance in the summer. [Internet] [Thesis]. Brno University of Technology; 2018. [cited 2021 Mar 01]. Available from: http://hdl.handle.net/11012/6099.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Václavík L. Studie strojů pro letní údržbu asfaltových komunikací: Study of machines for asphalt road maintenance in the summer. [Thesis]. Brno University of Technology; 2018. Available from: http://hdl.handle.net/11012/6099

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

8. Gummesson, Katja. William Blake's The Chimney Sweeper : - A Stylistic and Allegorical Study.

Degree: Teacher Education (LUT), 2011, Halmstad University

URL: http://urn.kb.se/resolve?urn=urn:nbn:se:hh:diva-19773

Subjects/Keywords: Stylistics; Foregrounding; Parallelism; Deviations; William Blake; Chimney Sweeper; Specific Languages; Studier av enskilda språk

…Katja Gummesson 800805 – 4127 Linguistic Theme: The Chimney Sweeper – A Stylistic and… …Gummesson 800805 – 4127 Linguistic Theme: The Chimney Sweeper – A Stylistic and Allegorical Study… …Chimney Sweeper – A Stylistic and Allegorical Study Halmstad Högskola Supervisor: Stuart Foster… …The Chimney Sweeper. 15 Songs of Innocence and Songs of Experience have many times been… …The Chimney Sweeper – A Stylistic and Allegorical Study Halmstad Högskola Supervisor: Stuart…

8 more images…

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Gummesson, K. (2011). William Blake's The Chimney Sweeper : - A Stylistic and Allegorical Study. (Thesis). Halmstad University. Retrieved from http://urn.kb.se/resolve?urn=urn:nbn:se:hh:diva-19773

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Gummesson, Katja. “William Blake's The Chimney Sweeper : - A Stylistic and Allegorical Study.” 2011. Thesis, Halmstad University. Accessed March 01, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:hh:diva-19773.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Gummesson, Katja. “William Blake's The Chimney Sweeper : - A Stylistic and Allegorical Study.” 2011. Web. 01 Mar 2021.

Vancouver:

Gummesson K. William Blake's The Chimney Sweeper : - A Stylistic and Allegorical Study. [Internet] [Thesis]. Halmstad University; 2011. [cited 2021 Mar 01]. Available from: http://urn.kb.se/resolve?urn=urn:nbn:se:hh:diva-19773.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Gummesson K. William Blake's The Chimney Sweeper : - A Stylistic and Allegorical Study. [Thesis]. Halmstad University; 2011. Available from: http://urn.kb.se/resolve?urn=urn:nbn:se:hh:diva-19773

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

9. Vraspír, Kamil. Zlepšování parametrů prototypu mycí samosběrací nástavby: Improving the parameters of the prototype of self-loading water sweeper superstructure.

Degree: 2019, Brno University of Technology

URL: http://hdl.handle.net/11012/59685

► This thesis explores development stages of a Self-loading water sweeper superstructure prototype. The theoretical part describes thoroughfares in terms of pollution, various types of cleaning… (more)

Subjects/Keywords: Mycí samosběrací nástavba; mycí zařízení; konstrukční FMEA; sekundární prašnost; polétavý prach; čištění komunikací; vývoj prototypu; Self-loading water sweeper superstructure; washing equipment; design FMEA; secondary dust; particulate matter; road cleaning; prototype development

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Vraspír, K. (2019). Zlepšování parametrů prototypu mycí samosběrací nástavby: Improving the parameters of the prototype of self-loading water sweeper superstructure. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/59685

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Vraspír, Kamil. “Zlepšování parametrů prototypu mycí samosběrací nástavby: Improving the parameters of the prototype of self-loading water sweeper superstructure.” 2019. Thesis, Brno University of Technology. Accessed March 01, 2021. http://hdl.handle.net/11012/59685.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Vraspír, Kamil. “Zlepšování parametrů prototypu mycí samosběrací nástavby: Improving the parameters of the prototype of self-loading water sweeper superstructure.” 2019. Web. 01 Mar 2021.

Vancouver:

Vraspír K. Zlepšování parametrů prototypu mycí samosběrací nástavby: Improving the parameters of the prototype of self-loading water sweeper superstructure. [Internet] [Thesis]. Brno University of Technology; 2019. [cited 2021 Mar 01]. Available from: http://hdl.handle.net/11012/59685.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Vraspír K. Zlepšování parametrů prototypu mycí samosběrací nástavby: Improving the parameters of the prototype of self-loading water sweeper superstructure. [Thesis]. Brno University of Technology; 2019. Available from: http://hdl.handle.net/11012/59685

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

		in
And / Or
		in
And / Or
		in
And / Or
		in

Open Access Theses and Dissertations