Advanced search options

Advanced Search Options 🞨

Browse by author name (“Author name starts with…”).

Find ETDs with:

in
/  
in
/  
in
/  
in

Written in Published in Earliest date Latest date

Sorted by

Results per page:

Sorted by: relevance · author · university · dateNew search

You searched for subject:(prototyping). Showing records 1 – 30 of 774 total matches.

[1] [2] [3] [4] [5] … [26]

Search Limiters

Last 2 Years | English Only

Degrees

Levels

Languages

Country

▼ Search Limiters


University of Missouri – Columbia

1. Liu, Chen-Yu. A comparative study of rapid prototyping systems.

Degree: 2013, University of Missouri – Columbia

 A general comparative study of the literature sources across different Rapid Prototyping systems and performance in different build orientations has shown that the publications are… (more)

Subjects/Keywords: Rapid prototyping

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Liu, C. (2013). A comparative study of rapid prototyping systems. (Thesis). University of Missouri – Columbia. Retrieved from https://doi.org/10.32469/10355/43088

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16th Edition):

Liu, Chen-Yu. “A comparative study of rapid prototyping systems.” 2013. Thesis, University of Missouri – Columbia. Accessed February 17, 2020. https://doi.org/10.32469/10355/43088.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7th Edition):

Liu, Chen-Yu. “A comparative study of rapid prototyping systems.” 2013. Web. 17 Feb 2020.

Vancouver:

Liu C. A comparative study of rapid prototyping systems. [Internet] [Thesis]. University of Missouri – Columbia; 2013. [cited 2020 Feb 17]. Available from: https://doi.org/10.32469/10355/43088.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Liu C. A comparative study of rapid prototyping systems. [Thesis]. University of Missouri – Columbia; 2013. Available from: https://doi.org/10.32469/10355/43088

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation


NSYSU

2. Tsai, Kun-ming. Analysis and prototyping micro-structured periodic light guides produced by plastic molding.

Degree: Master, Electro-Optical Engineering, 2009, NSYSU

 With the constantly evolving displayer technology, the liquid crystal displayer (LCD) has become widely utilized on the market. As a result, the demand for high-performance… (more)

Subjects/Keywords: micro-structures; prototyping

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Tsai, K. (2009). Analysis and prototyping micro-structured periodic light guides produced by plastic molding. (Thesis). NSYSU. Retrieved from http://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0714109-154606

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16th Edition):

Tsai, Kun-ming. “Analysis and prototyping micro-structured periodic light guides produced by plastic molding.” 2009. Thesis, NSYSU. Accessed February 17, 2020. http://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0714109-154606.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7th Edition):

Tsai, Kun-ming. “Analysis and prototyping micro-structured periodic light guides produced by plastic molding.” 2009. Web. 17 Feb 2020.

Vancouver:

Tsai K. Analysis and prototyping micro-structured periodic light guides produced by plastic molding. [Internet] [Thesis]. NSYSU; 2009. [cited 2020 Feb 17]. Available from: http://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0714109-154606.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Tsai K. Analysis and prototyping micro-structured periodic light guides produced by plastic molding. [Thesis]. NSYSU; 2009. Available from: http://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0714109-154606

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation


Oregon State University

3. Aramphongphun, Chuckaphun. Application of ultrasonic welding to the rapid prototyping of microfluidic systems for biotechnology.

Degree: MS, Industrial Engineering, 2001, Oregon State University

 This paper introduces an alternative technique for the development of microfluidic systems for biotechnology based on mechanical machining and ultrasonic welding. Advantages of this approach… (more)

Subjects/Keywords: Rapid prototyping

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Aramphongphun, C. (2001). Application of ultrasonic welding to the rapid prototyping of microfluidic systems for biotechnology. (Masters Thesis). Oregon State University. Retrieved from http://hdl.handle.net/1957/29328

Chicago Manual of Style (16th Edition):

Aramphongphun, Chuckaphun. “Application of ultrasonic welding to the rapid prototyping of microfluidic systems for biotechnology.” 2001. Masters Thesis, Oregon State University. Accessed February 17, 2020. http://hdl.handle.net/1957/29328.

MLA Handbook (7th Edition):

Aramphongphun, Chuckaphun. “Application of ultrasonic welding to the rapid prototyping of microfluidic systems for biotechnology.” 2001. Web. 17 Feb 2020.

Vancouver:

Aramphongphun C. Application of ultrasonic welding to the rapid prototyping of microfluidic systems for biotechnology. [Internet] [Masters thesis]. Oregon State University; 2001. [cited 2020 Feb 17]. Available from: http://hdl.handle.net/1957/29328.

Council of Science Editors:

Aramphongphun C. Application of ultrasonic welding to the rapid prototyping of microfluidic systems for biotechnology. [Masters Thesis]. Oregon State University; 2001. Available from: http://hdl.handle.net/1957/29328


University of Hong Kong

4. Chen, Zhe. Selection of optimal build orientation with minimum strain and maximumstrength in rapid prototyping.

Degree: M. Phil., 2010, University of Hong Kong

published_or_final_version

Mechanical Engineering

Master

Master of Philosophy

Advisors/Committee Members: Chen, YH.

Subjects/Keywords: Rapid prototyping.

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Chen, Z. (2010). Selection of optimal build orientation with minimum strain and maximumstrength in rapid prototyping. (Masters Thesis). University of Hong Kong. Retrieved from Chen, Z. [陈哲]. (2010). Selection of optimal build orientation with minimum strain and maximum strength in rapid prototyping. (Thesis). University of Hong Kong, Pokfulam, Hong Kong SAR. Retrieved from http://dx.doi.org/10.5353/th_b4559097 ; http://dx.doi.org/10.5353/th_b4559097 ; http://hdl.handle.net/10722/133204

Chicago Manual of Style (16th Edition):

Chen, Zhe. “Selection of optimal build orientation with minimum strain and maximumstrength in rapid prototyping.” 2010. Masters Thesis, University of Hong Kong. Accessed February 17, 2020. Chen, Z. [陈哲]. (2010). Selection of optimal build orientation with minimum strain and maximum strength in rapid prototyping. (Thesis). University of Hong Kong, Pokfulam, Hong Kong SAR. Retrieved from http://dx.doi.org/10.5353/th_b4559097 ; http://dx.doi.org/10.5353/th_b4559097 ; http://hdl.handle.net/10722/133204.

MLA Handbook (7th Edition):

Chen, Zhe. “Selection of optimal build orientation with minimum strain and maximumstrength in rapid prototyping.” 2010. Web. 17 Feb 2020.

Vancouver:

Chen Z. Selection of optimal build orientation with minimum strain and maximumstrength in rapid prototyping. [Internet] [Masters thesis]. University of Hong Kong; 2010. [cited 2020 Feb 17]. Available from: Chen, Z. [陈哲]. (2010). Selection of optimal build orientation with minimum strain and maximum strength in rapid prototyping. (Thesis). University of Hong Kong, Pokfulam, Hong Kong SAR. Retrieved from http://dx.doi.org/10.5353/th_b4559097 ; http://dx.doi.org/10.5353/th_b4559097 ; http://hdl.handle.net/10722/133204.

Council of Science Editors:

Chen Z. Selection of optimal build orientation with minimum strain and maximumstrength in rapid prototyping. [Masters Thesis]. University of Hong Kong; 2010. Available from: Chen, Z. [陈哲]. (2010). Selection of optimal build orientation with minimum strain and maximum strength in rapid prototyping. (Thesis). University of Hong Kong, Pokfulam, Hong Kong SAR. Retrieved from http://dx.doi.org/10.5353/th_b4559097 ; http://dx.doi.org/10.5353/th_b4559097 ; http://hdl.handle.net/10722/133204


Universidade do Minho

5. Martins, André Batista. Prototyping a calculus of QoS : aware software components .

Degree: 2011, Universidade do Minho

 Over the last decade component-based software development arose as a promising paradigm to deal with the ever increasing complexity in software design, evolution and reuse.… (more)

Subjects/Keywords: Software composition; Mealy machines; Prototyping

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Martins, A. B. (2011). Prototyping a calculus of QoS : aware software components . (Masters Thesis). Universidade do Minho. Retrieved from http://hdl.handle.net/1822/27926

Chicago Manual of Style (16th Edition):

Martins, André Batista. “Prototyping a calculus of QoS : aware software components .” 2011. Masters Thesis, Universidade do Minho. Accessed February 17, 2020. http://hdl.handle.net/1822/27926.

MLA Handbook (7th Edition):

Martins, André Batista. “Prototyping a calculus of QoS : aware software components .” 2011. Web. 17 Feb 2020.

Vancouver:

Martins AB. Prototyping a calculus of QoS : aware software components . [Internet] [Masters thesis]. Universidade do Minho; 2011. [cited 2020 Feb 17]. Available from: http://hdl.handle.net/1822/27926.

Council of Science Editors:

Martins AB. Prototyping a calculus of QoS : aware software components . [Masters Thesis]. Universidade do Minho; 2011. Available from: http://hdl.handle.net/1822/27926


Ryerson University

6. Madahian, Parham Ghasemi. Implementation and Testing of a 3-D Hybrid Rapid Prototyping System Capable of Deposition and Machining.

Degree: 2003, Ryerson University

 Rapid Prototyping (RP), also known as Layered Manufacturing, is a widely used method of manufacturing which has been increasingly applied in the process of design… (more)

Subjects/Keywords: Rapid prototyping

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Madahian, P. G. (2003). Implementation and Testing of a 3-D Hybrid Rapid Prototyping System Capable of Deposition and Machining. (Thesis). Ryerson University. Retrieved from https://digital.library.ryerson.ca/islandora/object/RULA%3A2344

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16th Edition):

Madahian, Parham Ghasemi. “Implementation and Testing of a 3-D Hybrid Rapid Prototyping System Capable of Deposition and Machining.” 2003. Thesis, Ryerson University. Accessed February 17, 2020. https://digital.library.ryerson.ca/islandora/object/RULA%3A2344.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7th Edition):

Madahian, Parham Ghasemi. “Implementation and Testing of a 3-D Hybrid Rapid Prototyping System Capable of Deposition and Machining.” 2003. Web. 17 Feb 2020.

Vancouver:

Madahian PG. Implementation and Testing of a 3-D Hybrid Rapid Prototyping System Capable of Deposition and Machining. [Internet] [Thesis]. Ryerson University; 2003. [cited 2020 Feb 17]. Available from: https://digital.library.ryerson.ca/islandora/object/RULA%3A2344.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Madahian PG. Implementation and Testing of a 3-D Hybrid Rapid Prototyping System Capable of Deposition and Machining. [Thesis]. Ryerson University; 2003. Available from: https://digital.library.ryerson.ca/islandora/object/RULA%3A2344

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation


Delft University of Technology

7. Keijser, S. Modular RT-Motion USB:.

Degree: 2011, Delft University of Technology

 During the course of this thesis, RTM-USB (Real Time Motion on Universal Serial Bus) has grown from a single board motor controller to a motion… (more)

Subjects/Keywords: Modular; Motion Control; Prototyping; Electronics

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Keijser, S. (2011). Modular RT-Motion USB:. (Masters Thesis). Delft University of Technology. Retrieved from http://resolver.tudelft.nl/uuid:e17c7526-bb84-47f9-ae0a-36cacc343e1b

Chicago Manual of Style (16th Edition):

Keijser, S. “Modular RT-Motion USB:.” 2011. Masters Thesis, Delft University of Technology. Accessed February 17, 2020. http://resolver.tudelft.nl/uuid:e17c7526-bb84-47f9-ae0a-36cacc343e1b.

MLA Handbook (7th Edition):

Keijser, S. “Modular RT-Motion USB:.” 2011. Web. 17 Feb 2020.

Vancouver:

Keijser S. Modular RT-Motion USB:. [Internet] [Masters thesis]. Delft University of Technology; 2011. [cited 2020 Feb 17]. Available from: http://resolver.tudelft.nl/uuid:e17c7526-bb84-47f9-ae0a-36cacc343e1b.

Council of Science Editors:

Keijser S. Modular RT-Motion USB:. [Masters Thesis]. Delft University of Technology; 2011. Available from: http://resolver.tudelft.nl/uuid:e17c7526-bb84-47f9-ae0a-36cacc343e1b


Delft University of Technology

8. Das, R.G. Optimization of aircargo containers: Design of a new door for an aircargo container:.

Degree: 2015, Delft University of Technology

 The project started off with a design assignment from Zodiac Aerospace to develop a new door for an aircargo container. The current standard door is… (more)

Subjects/Keywords: aircargo; container; ergonomical; prototyping

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Das, R. G. (2015). Optimization of aircargo containers: Design of a new door for an aircargo container:. (Masters Thesis). Delft University of Technology. Retrieved from http://resolver.tudelft.nl/uuid:37ae73dc-f236-4040-a915-6f0b7447cc11

Chicago Manual of Style (16th Edition):

Das, R G. “Optimization of aircargo containers: Design of a new door for an aircargo container:.” 2015. Masters Thesis, Delft University of Technology. Accessed February 17, 2020. http://resolver.tudelft.nl/uuid:37ae73dc-f236-4040-a915-6f0b7447cc11.

MLA Handbook (7th Edition):

Das, R G. “Optimization of aircargo containers: Design of a new door for an aircargo container:.” 2015. Web. 17 Feb 2020.

Vancouver:

Das RG. Optimization of aircargo containers: Design of a new door for an aircargo container:. [Internet] [Masters thesis]. Delft University of Technology; 2015. [cited 2020 Feb 17]. Available from: http://resolver.tudelft.nl/uuid:37ae73dc-f236-4040-a915-6f0b7447cc11.

Council of Science Editors:

Das RG. Optimization of aircargo containers: Design of a new door for an aircargo container:. [Masters Thesis]. Delft University of Technology; 2015. Available from: http://resolver.tudelft.nl/uuid:37ae73dc-f236-4040-a915-6f0b7447cc11


Delft University of Technology

9. Das, M.F. Virtual Prototyping in Laundry Products: Development of a Maxdiff and Conjoint Interface:.

Degree: 2012, Delft University of Technology

 The aim of this research is to find out how Fast Moving Consumer Goods companies can perform an effective and fast market research to investigate… (more)

Subjects/Keywords: virtual prototyping; conjoint; Maxdiff

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Das, M. F. (2012). Virtual Prototyping in Laundry Products: Development of a Maxdiff and Conjoint Interface:. (Masters Thesis). Delft University of Technology. Retrieved from http://resolver.tudelft.nl/uuid:6aef10d5-5703-4f19-b1cc-44993d6a08d0

Chicago Manual of Style (16th Edition):

Das, M F. “Virtual Prototyping in Laundry Products: Development of a Maxdiff and Conjoint Interface:.” 2012. Masters Thesis, Delft University of Technology. Accessed February 17, 2020. http://resolver.tudelft.nl/uuid:6aef10d5-5703-4f19-b1cc-44993d6a08d0.

MLA Handbook (7th Edition):

Das, M F. “Virtual Prototyping in Laundry Products: Development of a Maxdiff and Conjoint Interface:.” 2012. Web. 17 Feb 2020.

Vancouver:

Das MF. Virtual Prototyping in Laundry Products: Development of a Maxdiff and Conjoint Interface:. [Internet] [Masters thesis]. Delft University of Technology; 2012. [cited 2020 Feb 17]. Available from: http://resolver.tudelft.nl/uuid:6aef10d5-5703-4f19-b1cc-44993d6a08d0.

Council of Science Editors:

Das MF. Virtual Prototyping in Laundry Products: Development of a Maxdiff and Conjoint Interface:. [Masters Thesis]. Delft University of Technology; 2012. Available from: http://resolver.tudelft.nl/uuid:6aef10d5-5703-4f19-b1cc-44993d6a08d0


Delft University of Technology

10. Smith, A. A Brand & Product Development for High Performance Bodyboarding, on the harsh Atlantic Coast of Ireland:.

Degree: 2013, Delft University of Technology

 The project is centered around the creation of a brand whose identity represents the unique character of the Irish Atlantic explorers. This group is not… (more)

Subjects/Keywords: bodyboard; travel; branding; prototyping

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Smith, A. (2013). A Brand & Product Development for High Performance Bodyboarding, on the harsh Atlantic Coast of Ireland:. (Masters Thesis). Delft University of Technology. Retrieved from http://resolver.tudelft.nl/uuid:8ce66c05-0176-42be-94e6-65648baf1e39

Chicago Manual of Style (16th Edition):

Smith, A. “A Brand & Product Development for High Performance Bodyboarding, on the harsh Atlantic Coast of Ireland:.” 2013. Masters Thesis, Delft University of Technology. Accessed February 17, 2020. http://resolver.tudelft.nl/uuid:8ce66c05-0176-42be-94e6-65648baf1e39.

MLA Handbook (7th Edition):

Smith, A. “A Brand & Product Development for High Performance Bodyboarding, on the harsh Atlantic Coast of Ireland:.” 2013. Web. 17 Feb 2020.

Vancouver:

Smith A. A Brand & Product Development for High Performance Bodyboarding, on the harsh Atlantic Coast of Ireland:. [Internet] [Masters thesis]. Delft University of Technology; 2013. [cited 2020 Feb 17]. Available from: http://resolver.tudelft.nl/uuid:8ce66c05-0176-42be-94e6-65648baf1e39.

Council of Science Editors:

Smith A. A Brand & Product Development for High Performance Bodyboarding, on the harsh Atlantic Coast of Ireland:. [Masters Thesis]. Delft University of Technology; 2013. Available from: http://resolver.tudelft.nl/uuid:8ce66c05-0176-42be-94e6-65648baf1e39


Delft University of Technology

11. Pijnappel, P.I.R. Programming for Interactive Prototypes:.

Degree: 2013, Delft University of Technology

 Goal In recent years, designers have increasingly started to make experiential prototypes containing electronics within the design process. This has been enabled by the rise… (more)

Subjects/Keywords: programming; electronics; prototyping; Arduino; app

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Pijnappel, P. I. R. (2013). Programming for Interactive Prototypes:. (Masters Thesis). Delft University of Technology. Retrieved from http://resolver.tudelft.nl/uuid:81802446-1d74-4d3c-8cea-27aa5b2015fe

Chicago Manual of Style (16th Edition):

Pijnappel, P I R. “Programming for Interactive Prototypes:.” 2013. Masters Thesis, Delft University of Technology. Accessed February 17, 2020. http://resolver.tudelft.nl/uuid:81802446-1d74-4d3c-8cea-27aa5b2015fe.

MLA Handbook (7th Edition):

Pijnappel, P I R. “Programming for Interactive Prototypes:.” 2013. Web. 17 Feb 2020.

Vancouver:

Pijnappel PIR. Programming for Interactive Prototypes:. [Internet] [Masters thesis]. Delft University of Technology; 2013. [cited 2020 Feb 17]. Available from: http://resolver.tudelft.nl/uuid:81802446-1d74-4d3c-8cea-27aa5b2015fe.

Council of Science Editors:

Pijnappel PIR. Programming for Interactive Prototypes:. [Masters Thesis]. Delft University of Technology; 2013. Available from: http://resolver.tudelft.nl/uuid:81802446-1d74-4d3c-8cea-27aa5b2015fe


Stellenbosch University

12. Odendaal, Adriaan Izak. Die ontwikkeling van 'n pasklaar-vervaardigde kunsmatige intervertebrale skyf-implantaat.

Degree: Industrial Engineering, 2010, Stellenbosch University

Thesis (MScEng (Industrial Engineering)) – University of Stellenbosch, 2010.

ENGLISH ABSTRACT: Current technology enables researchers to identify a broad spectrum of opportunities in the biomedical industry… (more)

Subjects/Keywords: Industrial engineering; Rapid prototyping

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Odendaal, A. I. (2010). Die ontwikkeling van 'n pasklaar-vervaardigde kunsmatige intervertebrale skyf-implantaat. (Thesis). Stellenbosch University. Retrieved from http://hdl.handle.net/10019.1/5149

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16th Edition):

Odendaal, Adriaan Izak. “Die ontwikkeling van 'n pasklaar-vervaardigde kunsmatige intervertebrale skyf-implantaat.” 2010. Thesis, Stellenbosch University. Accessed February 17, 2020. http://hdl.handle.net/10019.1/5149.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7th Edition):

Odendaal, Adriaan Izak. “Die ontwikkeling van 'n pasklaar-vervaardigde kunsmatige intervertebrale skyf-implantaat.” 2010. Web. 17 Feb 2020.

Vancouver:

Odendaal AI. Die ontwikkeling van 'n pasklaar-vervaardigde kunsmatige intervertebrale skyf-implantaat. [Internet] [Thesis]. Stellenbosch University; 2010. [cited 2020 Feb 17]. Available from: http://hdl.handle.net/10019.1/5149.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Odendaal AI. Die ontwikkeling van 'n pasklaar-vervaardigde kunsmatige intervertebrale skyf-implantaat. [Thesis]. Stellenbosch University; 2010. Available from: http://hdl.handle.net/10019.1/5149

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation


University of Manitoba

13. Akhoondi Asadi, Alireza. Design and prototyping of a pneumatically enabled haptic device.

Degree: Mechanical Engineering, 2017, University of Manitoba

 The field of telerobotics is quickly progressing towards more intelligent and autonomous systems. Haptic devices are key tools to perform the teleoperation and are therefore… (more)

Subjects/Keywords: Design; Prototyping; Haptic device

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Akhoondi Asadi, A. (2017). Design and prototyping of a pneumatically enabled haptic device. (Masters Thesis). University of Manitoba. Retrieved from http://hdl.handle.net/1993/32421

Chicago Manual of Style (16th Edition):

Akhoondi Asadi, Alireza. “Design and prototyping of a pneumatically enabled haptic device.” 2017. Masters Thesis, University of Manitoba. Accessed February 17, 2020. http://hdl.handle.net/1993/32421.

MLA Handbook (7th Edition):

Akhoondi Asadi, Alireza. “Design and prototyping of a pneumatically enabled haptic device.” 2017. Web. 17 Feb 2020.

Vancouver:

Akhoondi Asadi A. Design and prototyping of a pneumatically enabled haptic device. [Internet] [Masters thesis]. University of Manitoba; 2017. [cited 2020 Feb 17]. Available from: http://hdl.handle.net/1993/32421.

Council of Science Editors:

Akhoondi Asadi A. Design and prototyping of a pneumatically enabled haptic device. [Masters Thesis]. University of Manitoba; 2017. Available from: http://hdl.handle.net/1993/32421


Rutgers University

14. Sun, Jingjing, 1977-. Micropen direct-write technique for fabrication of advanced electroceramic and optical materials:.

Degree: PhD, Materials Science and Engineering, 2010, Rutgers University

Direct-write technologies, a subset of the rapid prototyping, have been applied for many applications including electronics, photonics and biomedical engineering. Among them, MicropenTM is a… (more)

Subjects/Keywords: Rapid prototyping; Microelectromechanical systems

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Sun, Jingjing, 1. (2010). Micropen direct-write technique for fabrication of advanced electroceramic and optical materials:. (Doctoral Dissertation). Rutgers University. Retrieved from http://hdl.rutgers.edu/1782.2/rucore10001600001.ETD.000052155

Chicago Manual of Style (16th Edition):

Sun, Jingjing, 1977-. “Micropen direct-write technique for fabrication of advanced electroceramic and optical materials:.” 2010. Doctoral Dissertation, Rutgers University. Accessed February 17, 2020. http://hdl.rutgers.edu/1782.2/rucore10001600001.ETD.000052155.

MLA Handbook (7th Edition):

Sun, Jingjing, 1977-. “Micropen direct-write technique for fabrication of advanced electroceramic and optical materials:.” 2010. Web. 17 Feb 2020.

Vancouver:

Sun, Jingjing 1. Micropen direct-write technique for fabrication of advanced electroceramic and optical materials:. [Internet] [Doctoral dissertation]. Rutgers University; 2010. [cited 2020 Feb 17]. Available from: http://hdl.rutgers.edu/1782.2/rucore10001600001.ETD.000052155.

Council of Science Editors:

Sun, Jingjing 1. Micropen direct-write technique for fabrication of advanced electroceramic and optical materials:. [Doctoral Dissertation]. Rutgers University; 2010. Available from: http://hdl.rutgers.edu/1782.2/rucore10001600001.ETD.000052155


AUT University

15. McKenna, Nicholas. Gravity and Centrifugal Casting of Light Metal Alloys using rapidly produced sand moulds .

Degree: 2011, AUT University

 Traditional sand casting is a well understood method to produce metal shapes and has been used for many years in industry. It is a relatively… (more)

Subjects/Keywords: Prototyping; Casting; Moulds; Metals

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

McKenna, N. (2011). Gravity and Centrifugal Casting of Light Metal Alloys using rapidly produced sand moulds . (Thesis). AUT University. Retrieved from http://hdl.handle.net/10292/1119

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16th Edition):

McKenna, Nicholas. “Gravity and Centrifugal Casting of Light Metal Alloys using rapidly produced sand moulds .” 2011. Thesis, AUT University. Accessed February 17, 2020. http://hdl.handle.net/10292/1119.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7th Edition):

McKenna, Nicholas. “Gravity and Centrifugal Casting of Light Metal Alloys using rapidly produced sand moulds .” 2011. Web. 17 Feb 2020.

Vancouver:

McKenna N. Gravity and Centrifugal Casting of Light Metal Alloys using rapidly produced sand moulds . [Internet] [Thesis]. AUT University; 2011. [cited 2020 Feb 17]. Available from: http://hdl.handle.net/10292/1119.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

McKenna N. Gravity and Centrifugal Casting of Light Metal Alloys using rapidly produced sand moulds . [Thesis]. AUT University; 2011. Available from: http://hdl.handle.net/10292/1119

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation


Nanyang Technological University

16. Sriphutkiat, Yannapol. Development of acoustic nozzle for 3D printing .

Degree: 2019, Nanyang Technological University

 A random distribution of microparticles/cells increases the chance of deposition on the inner surface of the nozzle, leading to obstruction/clogging of nozzle constriction. Nozzle clogging… (more)

Subjects/Keywords: DRNTU::Engineering::Mechanical engineering::Prototyping

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Sriphutkiat, Y. (2019). Development of acoustic nozzle for 3D printing . (Thesis). Nanyang Technological University. Retrieved from http://hdl.handle.net/10220/47997

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16th Edition):

Sriphutkiat, Yannapol. “Development of acoustic nozzle for 3D printing .” 2019. Thesis, Nanyang Technological University. Accessed February 17, 2020. http://hdl.handle.net/10220/47997.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7th Edition):

Sriphutkiat, Yannapol. “Development of acoustic nozzle for 3D printing .” 2019. Web. 17 Feb 2020.

Vancouver:

Sriphutkiat Y. Development of acoustic nozzle for 3D printing . [Internet] [Thesis]. Nanyang Technological University; 2019. [cited 2020 Feb 17]. Available from: http://hdl.handle.net/10220/47997.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Sriphutkiat Y. Development of acoustic nozzle for 3D printing . [Thesis]. Nanyang Technological University; 2019. Available from: http://hdl.handle.net/10220/47997

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation


Nanyang Technological University

17. Monoharan, Vivek. Impact of exercise footwear features on middle-aged and older adults' lower limb muscle activity during gait .

Degree: 2019, Nanyang Technological University

 Muscle health has been established to decline as a function of age. Owing to this age-related deterioration, it has been noted that older adults (65+… (more)

Subjects/Keywords: Engineering::Mechanical engineering::Prototyping

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Monoharan, V. (2019). Impact of exercise footwear features on middle-aged and older adults' lower limb muscle activity during gait . (Thesis). Nanyang Technological University. Retrieved from http://hdl.handle.net/10220/50089

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16th Edition):

Monoharan, Vivek. “Impact of exercise footwear features on middle-aged and older adults' lower limb muscle activity during gait .” 2019. Thesis, Nanyang Technological University. Accessed February 17, 2020. http://hdl.handle.net/10220/50089.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7th Edition):

Monoharan, Vivek. “Impact of exercise footwear features on middle-aged and older adults' lower limb muscle activity during gait .” 2019. Web. 17 Feb 2020.

Vancouver:

Monoharan V. Impact of exercise footwear features on middle-aged and older adults' lower limb muscle activity during gait . [Internet] [Thesis]. Nanyang Technological University; 2019. [cited 2020 Feb 17]. Available from: http://hdl.handle.net/10220/50089.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Monoharan V. Impact of exercise footwear features on middle-aged and older adults' lower limb muscle activity during gait . [Thesis]. Nanyang Technological University; 2019. Available from: http://hdl.handle.net/10220/50089

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation


Karlstad University

18. Lamberg, Camilla. Evaluating the future development options for Ozlab.

Degree: Communication and IT, 2011, Karlstad University

  The Ozlab user-test facility at Karlstad University needs to be reprogrammed. This paper will be used as a decision support document for the redesigning.… (more)

Subjects/Keywords: Ozlab; prototyping; wizard of Oz

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Lamberg, C. (2011). Evaluating the future development options for Ozlab. (Thesis). Karlstad University. Retrieved from http://urn.kb.se/resolve?urn=urn:nbn:se:kau:diva-7956

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16th Edition):

Lamberg, Camilla. “Evaluating the future development options for Ozlab.” 2011. Thesis, Karlstad University. Accessed February 17, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:kau:diva-7956.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7th Edition):

Lamberg, Camilla. “Evaluating the future development options for Ozlab.” 2011. Web. 17 Feb 2020.

Vancouver:

Lamberg C. Evaluating the future development options for Ozlab. [Internet] [Thesis]. Karlstad University; 2011. [cited 2020 Feb 17]. Available from: http://urn.kb.se/resolve?urn=urn:nbn:se:kau:diva-7956.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Lamberg C. Evaluating the future development options for Ozlab. [Thesis]. Karlstad University; 2011. Available from: http://urn.kb.se/resolve?urn=urn:nbn:se:kau:diva-7956

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation


Halmstad University

19. ZafarUllahh, Usman. A Theoretical Evaluation of Commercially Available Tool Chain for Rapid Prototyping of Wireless Communication Systems.

Degree: Computer and Electrical Engineering (IDE), 2009, Halmstad University

  Using Moore’s Law, engineers and scientists have ability to place smart and powerful IC devices, with increasingly complex systems on a chip (SoC). This… (more)

Subjects/Keywords: Rapid Prototyping

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

ZafarUllahh, U. (2009). A Theoretical Evaluation of Commercially Available Tool Chain for Rapid Prototyping of Wireless Communication Systems. (Thesis). Halmstad University. Retrieved from http://urn.kb.se/resolve?urn=urn:nbn:se:hh:diva-2393

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16th Edition):

ZafarUllahh, Usman. “A Theoretical Evaluation of Commercially Available Tool Chain for Rapid Prototyping of Wireless Communication Systems.” 2009. Thesis, Halmstad University. Accessed February 17, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:hh:diva-2393.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7th Edition):

ZafarUllahh, Usman. “A Theoretical Evaluation of Commercially Available Tool Chain for Rapid Prototyping of Wireless Communication Systems.” 2009. Web. 17 Feb 2020.

Vancouver:

ZafarUllahh U. A Theoretical Evaluation of Commercially Available Tool Chain for Rapid Prototyping of Wireless Communication Systems. [Internet] [Thesis]. Halmstad University; 2009. [cited 2020 Feb 17]. Available from: http://urn.kb.se/resolve?urn=urn:nbn:se:hh:diva-2393.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

ZafarUllahh U. A Theoretical Evaluation of Commercially Available Tool Chain for Rapid Prototyping of Wireless Communication Systems. [Thesis]. Halmstad University; 2009. Available from: http://urn.kb.se/resolve?urn=urn:nbn:se:hh:diva-2393

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation


Brno University of Technology

20. Štancl, Václav. Aplikace metody Fused Deposition Modeling pro výrobu funkčního příslušenství ručního kuchyňského robota .

Degree: 2012, Brno University of Technology

 Tato bakalářská práce se zabývá výrobou součásti pomocí metody Fused deposition modeling a ekonomickým porovnáním této výroby s jinými výrobními technologiemi. Danou součástí je příslušenství… (more)

Subjects/Keywords: Rapid Prototyping; FDM; ABS plast; Rapid Prototyping; FDM; ABS plastic

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Štancl, V. (2012). Aplikace metody Fused Deposition Modeling pro výrobu funkčního příslušenství ručního kuchyňského robota . (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/4449

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16th Edition):

Štancl, Václav. “Aplikace metody Fused Deposition Modeling pro výrobu funkčního příslušenství ručního kuchyňského robota .” 2012. Thesis, Brno University of Technology. Accessed February 17, 2020. http://hdl.handle.net/11012/4449.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7th Edition):

Štancl, Václav. “Aplikace metody Fused Deposition Modeling pro výrobu funkčního příslušenství ručního kuchyňského robota .” 2012. Web. 17 Feb 2020.

Vancouver:

Štancl V. Aplikace metody Fused Deposition Modeling pro výrobu funkčního příslušenství ručního kuchyňského robota . [Internet] [Thesis]. Brno University of Technology; 2012. [cited 2020 Feb 17]. Available from: http://hdl.handle.net/11012/4449.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Štancl V. Aplikace metody Fused Deposition Modeling pro výrobu funkčního příslušenství ručního kuchyňského robota . [Thesis]. Brno University of Technology; 2012. Available from: http://hdl.handle.net/11012/4449

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation


Brno University of Technology

21. Drda, Jan. Přehled pokročilých technik rapid prototyping a jejich využití ve slévárenství .

Degree: 2012, Brno University of Technology

 Tato práce se zabývá přehledem metod rapid prototyping a jejich možností uplatnění ve slévárenství. Je rozdělena do tří částí. V první je uvedeno, jakým postupem… (more)

Subjects/Keywords: rapid prototyping; slévárenství; prototyp; rapid prototyping; casting; prototype

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Drda, J. (2012). Přehled pokročilých technik rapid prototyping a jejich využití ve slévárenství . (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/6073

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16th Edition):

Drda, Jan. “Přehled pokročilých technik rapid prototyping a jejich využití ve slévárenství .” 2012. Thesis, Brno University of Technology. Accessed February 17, 2020. http://hdl.handle.net/11012/6073.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7th Edition):

Drda, Jan. “Přehled pokročilých technik rapid prototyping a jejich využití ve slévárenství .” 2012. Web. 17 Feb 2020.

Vancouver:

Drda J. Přehled pokročilých technik rapid prototyping a jejich využití ve slévárenství . [Internet] [Thesis]. Brno University of Technology; 2012. [cited 2020 Feb 17]. Available from: http://hdl.handle.net/11012/6073.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Drda J. Přehled pokročilých technik rapid prototyping a jejich využití ve slévárenství . [Thesis]. Brno University of Technology; 2012. Available from: http://hdl.handle.net/11012/6073

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation


Brno University of Technology

22. Dobešová, Lenka. Moderní metody výroby implantátů technologiemi Rapid Prototyping .

Degree: 2017, Brno University of Technology

 Bakalářská práce je zaměřena na moderní metody výroby implantátů technologiemi Rapid Prototyping. V bakalářské práci je proveden základní popis nekonvenčních technologií výroby Rapid Prototyping, známých… (more)

Subjects/Keywords: Rapid prototyping; technologie EBM; implantáty; Rapid prototyping; EBM technology; implants

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Dobešová, L. (2017). Moderní metody výroby implantátů technologiemi Rapid Prototyping . (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/65915

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16th Edition):

Dobešová, Lenka. “Moderní metody výroby implantátů technologiemi Rapid Prototyping .” 2017. Thesis, Brno University of Technology. Accessed February 17, 2020. http://hdl.handle.net/11012/65915.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7th Edition):

Dobešová, Lenka. “Moderní metody výroby implantátů technologiemi Rapid Prototyping .” 2017. Web. 17 Feb 2020.

Vancouver:

Dobešová L. Moderní metody výroby implantátů technologiemi Rapid Prototyping . [Internet] [Thesis]. Brno University of Technology; 2017. [cited 2020 Feb 17]. Available from: http://hdl.handle.net/11012/65915.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Dobešová L. Moderní metody výroby implantátů technologiemi Rapid Prototyping . [Thesis]. Brno University of Technology; 2017. Available from: http://hdl.handle.net/11012/65915

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation


Brno University of Technology

23. Sedláková, Eva. Využití moderních technologií pro návrh výroby dětské skládačky .

Degree: 2017, Brno University of Technology

 Bakalářská práce se zabývá návrhem konstrukce a výroby dětské skládačky s využitím moderních metod a technologií. Charakterizuje skládačku jako hračku a její využití, popisuje aditivní… (more)

Subjects/Keywords: SolidEdge; Rapid Prototyping; RepRap; hračka; SolidEdge; Rapid Prototyping; RepRap; toy

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Sedláková, E. (2017). Využití moderních technologií pro návrh výroby dětské skládačky . (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/65924

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16th Edition):

Sedláková, Eva. “Využití moderních technologií pro návrh výroby dětské skládačky .” 2017. Thesis, Brno University of Technology. Accessed February 17, 2020. http://hdl.handle.net/11012/65924.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7th Edition):

Sedláková, Eva. “Využití moderních technologií pro návrh výroby dětské skládačky .” 2017. Web. 17 Feb 2020.

Vancouver:

Sedláková E. Využití moderních technologií pro návrh výroby dětské skládačky . [Internet] [Thesis]. Brno University of Technology; 2017. [cited 2020 Feb 17]. Available from: http://hdl.handle.net/11012/65924.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Sedláková E. Využití moderních technologií pro návrh výroby dětské skládačky . [Thesis]. Brno University of Technology; 2017. Available from: http://hdl.handle.net/11012/65924

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation


Brno University of Technology

24. Drbola, Vladimír. Výroba komponentu ruční brzdy osobního automobilu s využitím technologie rapid prototyping .

Degree: 2011, Brno University of Technology

 Bakalářská práce je zaměřena zejména na výrobu komponentu ruční brzdy pro automobil Fiat Stillo pomocí technologie Rapid Prototyping metodou FDM. Úvodní část práce obsahuje stručný… (more)

Subjects/Keywords: Komponent ruční brzdy; Rapid Prototyping; modelování; Handbrake component; Rapid Prototyping; modeling

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Drbola, V. (2011). Výroba komponentu ruční brzdy osobního automobilu s využitím technologie rapid prototyping . (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/1815

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16th Edition):

Drbola, Vladimír. “Výroba komponentu ruční brzdy osobního automobilu s využitím technologie rapid prototyping .” 2011. Thesis, Brno University of Technology. Accessed February 17, 2020. http://hdl.handle.net/11012/1815.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7th Edition):

Drbola, Vladimír. “Výroba komponentu ruční brzdy osobního automobilu s využitím technologie rapid prototyping .” 2011. Web. 17 Feb 2020.

Vancouver:

Drbola V. Výroba komponentu ruční brzdy osobního automobilu s využitím technologie rapid prototyping . [Internet] [Thesis]. Brno University of Technology; 2011. [cited 2020 Feb 17]. Available from: http://hdl.handle.net/11012/1815.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Drbola V. Výroba komponentu ruční brzdy osobního automobilu s využitím technologie rapid prototyping . [Thesis]. Brno University of Technology; 2011. Available from: http://hdl.handle.net/11012/1815

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation


Brno University of Technology

25. Čechman, David. Návrh konstrukce 3D tiskárny s rozšířenou funkcionalitou .

Degree: 2016, Brno University of Technology

 Cílem práce je konstrukční návrh pokročilé 3D tiskárny s přídavnou osou rotace včetně návrhu pohonů a kompletní výrobní dokumentace. V první části práce je popsán… (more)

Subjects/Keywords: 3D tisk; gravírování; Rapid Prototyping; 3D print; engraving; Rapid Prototyping

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Čechman, D. (2016). Návrh konstrukce 3D tiskárny s rozšířenou funkcionalitou . (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/61112

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16th Edition):

Čechman, David. “Návrh konstrukce 3D tiskárny s rozšířenou funkcionalitou .” 2016. Thesis, Brno University of Technology. Accessed February 17, 2020. http://hdl.handle.net/11012/61112.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7th Edition):

Čechman, David. “Návrh konstrukce 3D tiskárny s rozšířenou funkcionalitou .” 2016. Web. 17 Feb 2020.

Vancouver:

Čechman D. Návrh konstrukce 3D tiskárny s rozšířenou funkcionalitou . [Internet] [Thesis]. Brno University of Technology; 2016. [cited 2020 Feb 17]. Available from: http://hdl.handle.net/11012/61112.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Čechman D. Návrh konstrukce 3D tiskárny s rozšířenou funkcionalitou . [Thesis]. Brno University of Technology; 2016. Available from: http://hdl.handle.net/11012/61112

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation


University of Utah

26. Willis, Bryan Jon. Compact form fitting small antennas using three-dimensional rapid prototyping.

Degree: PhD, Electrical & Computer Engineering, 2012, University of Utah

 Three-dimensional (3D) rapid prototyping holds significant promise for future antenna designs. Many complex designs that would be unmanufacturable or costly are realizable on a 3D… (more)

Subjects/Keywords: Small Antennas; Three-dimensional rapid prototyping

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Willis, B. J. (2012). Compact form fitting small antennas using three-dimensional rapid prototyping. (Doctoral Dissertation). University of Utah. Retrieved from http://content.lib.utah.edu/cdm/singleitem/collection/etd3/id/660/rec/498

Chicago Manual of Style (16th Edition):

Willis, Bryan Jon. “Compact form fitting small antennas using three-dimensional rapid prototyping.” 2012. Doctoral Dissertation, University of Utah. Accessed February 17, 2020. http://content.lib.utah.edu/cdm/singleitem/collection/etd3/id/660/rec/498.

MLA Handbook (7th Edition):

Willis, Bryan Jon. “Compact form fitting small antennas using three-dimensional rapid prototyping.” 2012. Web. 17 Feb 2020.

Vancouver:

Willis BJ. Compact form fitting small antennas using three-dimensional rapid prototyping. [Internet] [Doctoral dissertation]. University of Utah; 2012. [cited 2020 Feb 17]. Available from: http://content.lib.utah.edu/cdm/singleitem/collection/etd3/id/660/rec/498.

Council of Science Editors:

Willis BJ. Compact form fitting small antennas using three-dimensional rapid prototyping. [Doctoral Dissertation]. University of Utah; 2012. Available from: http://content.lib.utah.edu/cdm/singleitem/collection/etd3/id/660/rec/498

27. Hariram Selvamurugan Satheesh, B. Rapid prototyping of digital controllers for electric drives investigations and implementations; -.

Degree: Electrical and Electronics Engineering, 2014, Anna University

During the last twenty years the control of industrial electrical newlinesystems has been the focus of important research and many significant newlineimprovements have been achieved… (more)

Subjects/Keywords: digital controllers; electrical engineering; Rapid prototyping

Page 1

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Hariram Selvamurugan Satheesh, B. (2014). Rapid prototyping of digital controllers for electric drives investigations and implementations; -. (Thesis). Anna University. Retrieved from http://shodhganga.inflibnet.ac.in/handle/10603/26645

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16th Edition):

Hariram Selvamurugan Satheesh, B. “Rapid prototyping of digital controllers for electric drives investigations and implementations; -.” 2014. Thesis, Anna University. Accessed February 17, 2020. http://shodhganga.inflibnet.ac.in/handle/10603/26645.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7th Edition):

Hariram Selvamurugan Satheesh, B. “Rapid prototyping of digital controllers for electric drives investigations and implementations; -.” 2014. Web. 17 Feb 2020.

Vancouver:

Hariram Selvamurugan Satheesh B. Rapid prototyping of digital controllers for electric drives investigations and implementations; -. [Internet] [Thesis]. Anna University; 2014. [cited 2020 Feb 17]. Available from: http://shodhganga.inflibnet.ac.in/handle/10603/26645.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Hariram Selvamurugan Satheesh B. Rapid prototyping of digital controllers for electric drives investigations and implementations; -. [Thesis]. Anna University; 2014. Available from: http://shodhganga.inflibnet.ac.in/handle/10603/26645

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

28. Liu, Chen-Yu. A comparative study of rapid prototyping systems.

Degree: 2013, University of Missouri – Columbia

 A general comparative study of the literature sources across different Rapid Prototyping systems and performance in different build orientations has shown that the publications are… (more)

Subjects/Keywords: Rapid prototyping

…3 2. Rapid Prototyping systems at the University of Missouri, Columbia… …Rapid Prototyping systems and performance in different build orientations has shown that the… …absorption and Shore hardness properties between different Rapid Prototyping systems. Test… …specimens were fabricated in four popular commercial Rapid Prototyping systems: Selective Laser… …guide to help users determine optimal strategies for rapid prototyping system selection. x… 

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Liu, C. (2013). A comparative study of rapid prototyping systems. (Thesis). University of Missouri – Columbia. Retrieved from http://hdl.handle.net/10355/43088

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16th Edition):

Liu, Chen-Yu. “A comparative study of rapid prototyping systems.” 2013. Thesis, University of Missouri – Columbia. Accessed February 17, 2020. http://hdl.handle.net/10355/43088.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7th Edition):

Liu, Chen-Yu. “A comparative study of rapid prototyping systems.” 2013. Web. 17 Feb 2020.

Vancouver:

Liu C. A comparative study of rapid prototyping systems. [Internet] [Thesis]. University of Missouri – Columbia; 2013. [cited 2020 Feb 17]. Available from: http://hdl.handle.net/10355/43088.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Liu C. A comparative study of rapid prototyping systems. [Thesis]. University of Missouri – Columbia; 2013. Available from: http://hdl.handle.net/10355/43088

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation


University of Waikato

29. Rajaguru, Janaka Chandraguptha. Development of an aluminium filled epoxy insert using perfactory rapid prototyping technique and electroless nickel plating for low volume plastic injection moulding .

Degree: 2015, University of Waikato

 In this research, a rapid tool for low volume production plastic injection moulding is designed, developed, and tested on an injection moulding machine. The tool… (more)

Subjects/Keywords: Rapid; tooling; injection; moulding; prototyping; electroless

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Rajaguru, J. C. (2015). Development of an aluminium filled epoxy insert using perfactory rapid prototyping technique and electroless nickel plating for low volume plastic injection moulding . (Doctoral Dissertation). University of Waikato. Retrieved from http://hdl.handle.net/10289/9324

Chicago Manual of Style (16th Edition):

Rajaguru, Janaka Chandraguptha. “Development of an aluminium filled epoxy insert using perfactory rapid prototyping technique and electroless nickel plating for low volume plastic injection moulding .” 2015. Doctoral Dissertation, University of Waikato. Accessed February 17, 2020. http://hdl.handle.net/10289/9324.

MLA Handbook (7th Edition):

Rajaguru, Janaka Chandraguptha. “Development of an aluminium filled epoxy insert using perfactory rapid prototyping technique and electroless nickel plating for low volume plastic injection moulding .” 2015. Web. 17 Feb 2020.

Vancouver:

Rajaguru JC. Development of an aluminium filled epoxy insert using perfactory rapid prototyping technique and electroless nickel plating for low volume plastic injection moulding . [Internet] [Doctoral dissertation]. University of Waikato; 2015. [cited 2020 Feb 17]. Available from: http://hdl.handle.net/10289/9324.

Council of Science Editors:

Rajaguru JC. Development of an aluminium filled epoxy insert using perfactory rapid prototyping technique and electroless nickel plating for low volume plastic injection moulding . [Doctoral Dissertation]. University of Waikato; 2015. Available from: http://hdl.handle.net/10289/9324


Penn State University

30. Dering, Matthew. Generation and Evaluation of Design Using Deep Neural Networks.

Degree: 2018, Penn State University

 The objective of this dissertation is to reduce inefficiencies and manual tasks that are part of the product design lifecycle, using proposed deep neural network… (more)

Subjects/Keywords: Deep learning; design; generative models; prototyping

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Dering, M. (2018). Generation and Evaluation of Design Using Deep Neural Networks. (Thesis). Penn State University. Retrieved from https://etda.libraries.psu.edu/catalog/15237mld284

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16th Edition):

Dering, Matthew. “Generation and Evaluation of Design Using Deep Neural Networks.” 2018. Thesis, Penn State University. Accessed February 17, 2020. https://etda.libraries.psu.edu/catalog/15237mld284.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7th Edition):

Dering, Matthew. “Generation and Evaluation of Design Using Deep Neural Networks.” 2018. Web. 17 Feb 2020.

Vancouver:

Dering M. Generation and Evaluation of Design Using Deep Neural Networks. [Internet] [Thesis]. Penn State University; 2018. [cited 2020 Feb 17]. Available from: https://etda.libraries.psu.edu/catalog/15237mld284.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Dering M. Generation and Evaluation of Design Using Deep Neural Networks. [Thesis]. Penn State University; 2018. Available from: https://etda.libraries.psu.edu/catalog/15237mld284

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

[1] [2] [3] [4] [5] … [26]

.