Advanced search options

Advanced Search Options 🞨

Browse by author name (“Author name starts with…”).

Find ETDs with:

in
/  
in
/  
in
/  
in

Written in Published in Earliest date Latest date

Sorted by

Results per page:

Sorted by: relevance · author · university · dateNew search

You searched for subject:(moldflow). Showing records 1 – 15 of 15 total matches.

Search Limiters

Last 2 Years | English Only

No search limiters apply to these results.

▼ Search Limiters


Brno University of Technology

1. Hamáček, Richard. Optimalizace technologických parametrů vstřikování plastového dílce .

Degree: 2011, Brno University of Technology

 Tento projekt se zabývá optimalizací vstřikovacího procesu plastového tělesa světlometu pro projekt DCW 204 Mopf halogen. Cílem práce je dosáhnout kratšího vstřikovacího cyklu při dodržení… (more)

Subjects/Keywords: těleso světlometu; deformace; světlomet; vstřikování; optimalizace; optická; Moldflow; housing; warpage; headlamp; injection; optimalization; Moldflow

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Hamáček, R. (2011). Optimalizace technologických parametrů vstřikování plastového dílce . (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/6326

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16th Edition):

Hamáček, Richard. “Optimalizace technologických parametrů vstřikování plastového dílce .” 2011. Thesis, Brno University of Technology. Accessed January 23, 2020. http://hdl.handle.net/11012/6326.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7th Edition):

Hamáček, Richard. “Optimalizace technologických parametrů vstřikování plastového dílce .” 2011. Web. 23 Jan 2020.

Vancouver:

Hamáček R. Optimalizace technologických parametrů vstřikování plastového dílce . [Internet] [Thesis]. Brno University of Technology; 2011. [cited 2020 Jan 23]. Available from: http://hdl.handle.net/11012/6326.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Hamáček R. Optimalizace technologických parametrů vstřikování plastového dílce . [Thesis]. Brno University of Technology; 2011. Available from: http://hdl.handle.net/11012/6326

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation


Brno University of Technology

2. Prokeš, Radim. Optimalizace tloušťky stěny tělesa světlometu .

Degree: 2010, Brno University of Technology

 Tento projekt se zabývá problematikou optimalizace tloušťky stěny plastového tělesa světlometu pomocí simulační moldflow analýzy. Jsou zde zmíněny základní informace o plastech a jejich dělení.… (more)

Subjects/Keywords: Světlomet; těleso světlometu; vstřikování; termoplast; moldflow analýza; vstřikovací forma.; Headlamp; housing; injection; thermoplast; moldflow analysis; injection form.

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Prokeš, R. (2010). Optimalizace tloušťky stěny tělesa světlometu . (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/15887

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16th Edition):

Prokeš, Radim. “Optimalizace tloušťky stěny tělesa světlometu .” 2010. Thesis, Brno University of Technology. Accessed January 23, 2020. http://hdl.handle.net/11012/15887.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7th Edition):

Prokeš, Radim. “Optimalizace tloušťky stěny tělesa světlometu .” 2010. Web. 23 Jan 2020.

Vancouver:

Prokeš R. Optimalizace tloušťky stěny tělesa světlometu . [Internet] [Thesis]. Brno University of Technology; 2010. [cited 2020 Jan 23]. Available from: http://hdl.handle.net/11012/15887.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Prokeš R. Optimalizace tloušťky stěny tělesa světlometu . [Thesis]. Brno University of Technology; 2010. Available from: http://hdl.handle.net/11012/15887

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation


Brno University of Technology

3. Hudeček, Jan. Analýza vlivu modelu materiálu na mechanické vlastnosti plastových kompozitních dílců .

Degree: 2018, Brno University of Technology

 Předkládaná diplomová práce se zabývá výpočtem mechanických vlastností částí světlometů. Dílce světlometu jsou definované pomocí dvou materiálových modelů lineárního materiálového modelu a materiálového modelu získaného… (more)

Subjects/Keywords: Automobilové světlomety; Moldflow; Ansys; metoda konečných prvků; dynamické výpočty; Automotive headlamps; Moldflow; Ansys; finite elementh method; dynamical calculations

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Hudeček, J. (2018). Analýza vlivu modelu materiálu na mechanické vlastnosti plastových kompozitních dílců . (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/83655

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16th Edition):

Hudeček, Jan. “Analýza vlivu modelu materiálu na mechanické vlastnosti plastových kompozitních dílců .” 2018. Thesis, Brno University of Technology. Accessed January 23, 2020. http://hdl.handle.net/11012/83655.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7th Edition):

Hudeček, Jan. “Analýza vlivu modelu materiálu na mechanické vlastnosti plastových kompozitních dílců .” 2018. Web. 23 Jan 2020.

Vancouver:

Hudeček J. Analýza vlivu modelu materiálu na mechanické vlastnosti plastových kompozitních dílců . [Internet] [Thesis]. Brno University of Technology; 2018. [cited 2020 Jan 23]. Available from: http://hdl.handle.net/11012/83655.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Hudeček J. Analýza vlivu modelu materiálu na mechanické vlastnosti plastových kompozitních dílců . [Thesis]. Brno University of Technology; 2018. Available from: http://hdl.handle.net/11012/83655

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation


Brno University of Technology

4. Ulrich, Josef. Optimalizace technologických parametrů vstřikování plastového dílce .

Degree: 2014, Brno University of Technology

 Diplomová práce se zabývá optimalizací vstřikovacích parametrů při uvádění vstřikovací formy do výroby. V úvodu se nachází studie plastů, vstřikovacích forem, vstřikovacích strojů, samotných vstřikovacích… (more)

Subjects/Keywords: plasty; vstřikovací formy; vstřikovací stroje; moldflow analýza; technologie vstřikování; plastics; injection molds; injection molding machine; moldflow analysis; injection molding technology

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Ulrich, J. (2014). Optimalizace technologických parametrů vstřikování plastového dílce . (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/31951

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16th Edition):

Ulrich, Josef. “Optimalizace technologických parametrů vstřikování plastového dílce .” 2014. Thesis, Brno University of Technology. Accessed January 23, 2020. http://hdl.handle.net/11012/31951.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7th Edition):

Ulrich, Josef. “Optimalizace technologických parametrů vstřikování plastového dílce .” 2014. Web. 23 Jan 2020.

Vancouver:

Ulrich J. Optimalizace technologických parametrů vstřikování plastového dílce . [Internet] [Thesis]. Brno University of Technology; 2014. [cited 2020 Jan 23]. Available from: http://hdl.handle.net/11012/31951.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Ulrich J. Optimalizace technologických parametrů vstřikování plastového dílce . [Thesis]. Brno University of Technology; 2014. Available from: http://hdl.handle.net/11012/31951

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation


The Ohio State University

5. Srithep, Yottha. A study on material distribution, mechanical properties, and numerical simulation in co-injection molding.

Degree: MS, Industrial and Systems Engineering, 2008, The Ohio State University

 In co-injection molding process, two different polymer melts are sequentially injected into a mold to form a part with a skin/core structure. Co-injection molding can… (more)

Subjects/Keywords: injection molding; co-injection molding; polymer processing; Moldflow

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Srithep, Y. (2008). A study on material distribution, mechanical properties, and numerical simulation in co-injection molding. (Masters Thesis). The Ohio State University. Retrieved from http://rave.ohiolink.edu/etdc/view?acc_num=osu1204150909

Chicago Manual of Style (16th Edition):

Srithep, Yottha. “A study on material distribution, mechanical properties, and numerical simulation in co-injection molding.” 2008. Masters Thesis, The Ohio State University. Accessed January 23, 2020. http://rave.ohiolink.edu/etdc/view?acc_num=osu1204150909.

MLA Handbook (7th Edition):

Srithep, Yottha. “A study on material distribution, mechanical properties, and numerical simulation in co-injection molding.” 2008. Web. 23 Jan 2020.

Vancouver:

Srithep Y. A study on material distribution, mechanical properties, and numerical simulation in co-injection molding. [Internet] [Masters thesis]. The Ohio State University; 2008. [cited 2020 Jan 23]. Available from: http://rave.ohiolink.edu/etdc/view?acc_num=osu1204150909.

Council of Science Editors:

Srithep Y. A study on material distribution, mechanical properties, and numerical simulation in co-injection molding. [Masters Thesis]. The Ohio State University; 2008. Available from: http://rave.ohiolink.edu/etdc/view?acc_num=osu1204150909

6. Vičič, Ervin. Uporaba FMEA - pristopa pri procesu brizganja termoplastov.

Degree: 2019, Univerza v Mariboru

V magistrski nalogi je prikazana uporaba FMEA-metode na snovanju proizvodnega procesa brizganja termoplastov za dan izdelek. V FMEA-analizi je pozornost posvečena iskanju možnih oblik napak,… (more)

Subjects/Keywords: FMEA-metoda; snovanje; proces brizganja termoplastov; Moldflow; FMEA-method; designing; Process of Injection Moulding of Thermoplastics; Moldflow; info:eu-repo/classification/udc/621.767.019:678.073(043.2)

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Vičič, E. (2019). Uporaba FMEA - pristopa pri procesu brizganja termoplastov. (Masters Thesis). Univerza v Mariboru. Retrieved from https://dk.um.si/IzpisGradiva.php?id=73536 ; https://dk.um.si/Dokument.php?id=134205&dn= ; https://plus.si.cobiss.net/opac7/bib/22808598?lang=sl

Chicago Manual of Style (16th Edition):

Vičič, Ervin. “Uporaba FMEA - pristopa pri procesu brizganja termoplastov.” 2019. Masters Thesis, Univerza v Mariboru. Accessed January 23, 2020. https://dk.um.si/IzpisGradiva.php?id=73536 ; https://dk.um.si/Dokument.php?id=134205&dn= ; https://plus.si.cobiss.net/opac7/bib/22808598?lang=sl.

MLA Handbook (7th Edition):

Vičič, Ervin. “Uporaba FMEA - pristopa pri procesu brizganja termoplastov.” 2019. Web. 23 Jan 2020.

Vancouver:

Vičič E. Uporaba FMEA - pristopa pri procesu brizganja termoplastov. [Internet] [Masters thesis]. Univerza v Mariboru; 2019. [cited 2020 Jan 23]. Available from: https://dk.um.si/IzpisGradiva.php?id=73536 ; https://dk.um.si/Dokument.php?id=134205&dn= ; https://plus.si.cobiss.net/opac7/bib/22808598?lang=sl.

Council of Science Editors:

Vičič E. Uporaba FMEA - pristopa pri procesu brizganja termoplastov. [Masters Thesis]. Univerza v Mariboru; 2019. Available from: https://dk.um.si/IzpisGradiva.php?id=73536 ; https://dk.um.si/Dokument.php?id=134205&dn= ; https://plus.si.cobiss.net/opac7/bib/22808598?lang=sl

7. Jahan, Nawrin. Fiber Orientation Prediction and Strength Evaluation of Composite Spur Gears Reinforced by Discontinuous Fiber.

Degree: MS, Mechanical Engineering, 2016, South Dakota State University

  Composite materials have been extensively used for their important role in attenuation of components design, low specific weight, high mechanical performance, and excellent corrosion… (more)

Subjects/Keywords: ANSYS; carbon fiber; fiber orientation; injection molding; moldflow; spur gear; Manufacturing; Mechanical Engineering

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Jahan, N. (2016). Fiber Orientation Prediction and Strength Evaluation of Composite Spur Gears Reinforced by Discontinuous Fiber. (Masters Thesis). South Dakota State University. Retrieved from http://openprairie.sdstate.edu/etd/1044

Chicago Manual of Style (16th Edition):

Jahan, Nawrin. “Fiber Orientation Prediction and Strength Evaluation of Composite Spur Gears Reinforced by Discontinuous Fiber.” 2016. Masters Thesis, South Dakota State University. Accessed January 23, 2020. http://openprairie.sdstate.edu/etd/1044.

MLA Handbook (7th Edition):

Jahan, Nawrin. “Fiber Orientation Prediction and Strength Evaluation of Composite Spur Gears Reinforced by Discontinuous Fiber.” 2016. Web. 23 Jan 2020.

Vancouver:

Jahan N. Fiber Orientation Prediction and Strength Evaluation of Composite Spur Gears Reinforced by Discontinuous Fiber. [Internet] [Masters thesis]. South Dakota State University; 2016. [cited 2020 Jan 23]. Available from: http://openprairie.sdstate.edu/etd/1044.

Council of Science Editors:

Jahan N. Fiber Orientation Prediction and Strength Evaluation of Composite Spur Gears Reinforced by Discontinuous Fiber. [Masters Thesis]. South Dakota State University; 2016. Available from: http://openprairie.sdstate.edu/etd/1044


University of Bradford

8. Parveen, Bushra. Fibre orientation and breakage in glass fibre reinforced polymer composite systems : experimental validation of models for injection mouldings : validation of short and long fibre prediction models within Autodesk Simulation Moldflow Insight 2014.

Degree: PhD, 2014, University of Bradford

 End-gated and centre gated mouldings have been assessed with varying thickness and sprue geometries for the centre gate. Alternative image analysis techniques are used to… (more)

Subjects/Keywords: Fibre; Orientation; Length; Prediction; Modelling; Moldflow; Long fibre; Short fibre; Injection moulding; Glass fibre; Reinforced polymer composite systems

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Parveen, B. (2014). Fibre orientation and breakage in glass fibre reinforced polymer composite systems : experimental validation of models for injection mouldings : validation of short and long fibre prediction models within Autodesk Simulation Moldflow Insight 2014. (Doctoral Dissertation). University of Bradford. Retrieved from http://hdl.handle.net/10454/14865

Chicago Manual of Style (16th Edition):

Parveen, Bushra. “Fibre orientation and breakage in glass fibre reinforced polymer composite systems : experimental validation of models for injection mouldings : validation of short and long fibre prediction models within Autodesk Simulation Moldflow Insight 2014.” 2014. Doctoral Dissertation, University of Bradford. Accessed January 23, 2020. http://hdl.handle.net/10454/14865.

MLA Handbook (7th Edition):

Parveen, Bushra. “Fibre orientation and breakage in glass fibre reinforced polymer composite systems : experimental validation of models for injection mouldings : validation of short and long fibre prediction models within Autodesk Simulation Moldflow Insight 2014.” 2014. Web. 23 Jan 2020.

Vancouver:

Parveen B. Fibre orientation and breakage in glass fibre reinforced polymer composite systems : experimental validation of models for injection mouldings : validation of short and long fibre prediction models within Autodesk Simulation Moldflow Insight 2014. [Internet] [Doctoral dissertation]. University of Bradford; 2014. [cited 2020 Jan 23]. Available from: http://hdl.handle.net/10454/14865.

Council of Science Editors:

Parveen B. Fibre orientation and breakage in glass fibre reinforced polymer composite systems : experimental validation of models for injection mouldings : validation of short and long fibre prediction models within Autodesk Simulation Moldflow Insight 2014. [Doctoral Dissertation]. University of Bradford; 2014. Available from: http://hdl.handle.net/10454/14865

9. Kočar, Anton. Vpliv hladnih spojev na mehanske lastnosti polimernih materialov.

Degree: 2016, Univerza v Mariboru

Polimerni materiali so v zadnjem času zelo razširjeni, uporabljajo se v praktično vseh vejah industrije, saj jih odlikujejo relativno nizka cena in širok spekter mehanskih… (more)

Subjects/Keywords: hladni spoj; polimerni materiali; mehanske lastnosti; natezni preizkus; simulacije brizganja; trdnostne simulacije; preslikava hladnih spojev; Moldflow; Abaqus; Helius; cold weld; polymeric materials; mechanical properties; tensile testing; injection molding simulation; structural simulation; cold weld mapping; Moldflow; Abaqus; Helius PFA; info:eu-repo/classification/udc/620.172.24:678.027.74(043.2)

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Kočar, A. (2016). Vpliv hladnih spojev na mehanske lastnosti polimernih materialov. (Masters Thesis). Univerza v Mariboru. Retrieved from https://dk.um.si/IzpisGradiva.php?id=64608 ; https://dk.um.si/Dokument.php?id=108294&dn= ; https://plus.si.cobiss.net/opac7/bib/20439062?lang=sl

Chicago Manual of Style (16th Edition):

Kočar, Anton. “Vpliv hladnih spojev na mehanske lastnosti polimernih materialov.” 2016. Masters Thesis, Univerza v Mariboru. Accessed January 23, 2020. https://dk.um.si/IzpisGradiva.php?id=64608 ; https://dk.um.si/Dokument.php?id=108294&dn= ; https://plus.si.cobiss.net/opac7/bib/20439062?lang=sl.

MLA Handbook (7th Edition):

Kočar, Anton. “Vpliv hladnih spojev na mehanske lastnosti polimernih materialov.” 2016. Web. 23 Jan 2020.

Vancouver:

Kočar A. Vpliv hladnih spojev na mehanske lastnosti polimernih materialov. [Internet] [Masters thesis]. Univerza v Mariboru; 2016. [cited 2020 Jan 23]. Available from: https://dk.um.si/IzpisGradiva.php?id=64608 ; https://dk.um.si/Dokument.php?id=108294&dn= ; https://plus.si.cobiss.net/opac7/bib/20439062?lang=sl.

Council of Science Editors:

Kočar A. Vpliv hladnih spojev na mehanske lastnosti polimernih materialov. [Masters Thesis]. Univerza v Mariboru; 2016. Available from: https://dk.um.si/IzpisGradiva.php?id=64608 ; https://dk.um.si/Dokument.php?id=108294&dn= ; https://plus.si.cobiss.net/opac7/bib/20439062?lang=sl


Lehigh University

10. Mai, Che-Lun. Application of Iterative Learning Control to MoldFlow Simulations of a Thermoplastic Injection Molding Process.

Degree: MS, Mechanical Engineering, 2011, Lehigh University

Subjects/Keywords: Control; Injection Molding; Iterative Learning Control; MoldFlow; Simulation; Weld Line; Mechanical Engineering

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Mai, C. (2011). Application of Iterative Learning Control to MoldFlow Simulations of a Thermoplastic Injection Molding Process. (Thesis). Lehigh University. Retrieved from https://preserve.lehigh.edu/etd/1117

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16th Edition):

Mai, Che-Lun. “Application of Iterative Learning Control to MoldFlow Simulations of a Thermoplastic Injection Molding Process.” 2011. Thesis, Lehigh University. Accessed January 23, 2020. https://preserve.lehigh.edu/etd/1117.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7th Edition):

Mai, Che-Lun. “Application of Iterative Learning Control to MoldFlow Simulations of a Thermoplastic Injection Molding Process.” 2011. Web. 23 Jan 2020.

Vancouver:

Mai C. Application of Iterative Learning Control to MoldFlow Simulations of a Thermoplastic Injection Molding Process. [Internet] [Thesis]. Lehigh University; 2011. [cited 2020 Jan 23]. Available from: https://preserve.lehigh.edu/etd/1117.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Mai C. Application of Iterative Learning Control to MoldFlow Simulations of a Thermoplastic Injection Molding Process. [Thesis]. Lehigh University; 2011. Available from: https://preserve.lehigh.edu/etd/1117

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation


University of Western Ontario

11. Motaghi, Atieh. Direct Sheet Molding Compound process (D-SMC).

Degree: 2018, University of Western Ontario

 The combination of highly crosslinked resin and long glass fiber reinforcement in direct sheet molding compound (D-SMC) provides the parts with high physical properties and… (more)

Subjects/Keywords: Composite materials; fiber orientation; direct sheet molding compound (D-SMC); numerical simulation; OpenFOAM; Ansys CFX; Ansys Polyflow; Moldflow; micro computed tomography (μCT); Carreau viscosity model; rheology; Complex Fluids; Polymer Science

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Motaghi, A. (2018). Direct Sheet Molding Compound process (D-SMC). (Thesis). University of Western Ontario. Retrieved from https://ir.lib.uwo.ca/etd/5284

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16th Edition):

Motaghi, Atieh. “Direct Sheet Molding Compound process (D-SMC).” 2018. Thesis, University of Western Ontario. Accessed January 23, 2020. https://ir.lib.uwo.ca/etd/5284.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7th Edition):

Motaghi, Atieh. “Direct Sheet Molding Compound process (D-SMC).” 2018. Web. 23 Jan 2020.

Vancouver:

Motaghi A. Direct Sheet Molding Compound process (D-SMC). [Internet] [Thesis]. University of Western Ontario; 2018. [cited 2020 Jan 23]. Available from: https://ir.lib.uwo.ca/etd/5284.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Motaghi A. Direct Sheet Molding Compound process (D-SMC). [Thesis]. University of Western Ontario; 2018. Available from: https://ir.lib.uwo.ca/etd/5284

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation


Loughborough University

12. Mullath, Aravind. Process simulation and optimisation of thin wall injection moulded components.

Degree: PhD, 2013, Loughborough University

 Integrally moulded hinges and tension bands are important features in packaging components for plastic closures and their function is critically dependent on the flow induced… (more)

Subjects/Keywords: Poly propylene (PP); Injection moulding; Thin wall injection moulded parts; Hinges; Tension bands; MoldFlow; Design of experiments (DoE); In-cavity data; Packaging; PP nano-composites; Post consumer recyclate PP

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Mullath, A. (2013). Process simulation and optimisation of thin wall injection moulded components. (Doctoral Dissertation). Loughborough University. Retrieved from https://dspace.lboro.ac.uk/2134/13521 ; http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.747867

Chicago Manual of Style (16th Edition):

Mullath, Aravind. “Process simulation and optimisation of thin wall injection moulded components.” 2013. Doctoral Dissertation, Loughborough University. Accessed January 23, 2020. https://dspace.lboro.ac.uk/2134/13521 ; http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.747867.

MLA Handbook (7th Edition):

Mullath, Aravind. “Process simulation and optimisation of thin wall injection moulded components.” 2013. Web. 23 Jan 2020.

Vancouver:

Mullath A. Process simulation and optimisation of thin wall injection moulded components. [Internet] [Doctoral dissertation]. Loughborough University; 2013. [cited 2020 Jan 23]. Available from: https://dspace.lboro.ac.uk/2134/13521 ; http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.747867.

Council of Science Editors:

Mullath A. Process simulation and optimisation of thin wall injection moulded components. [Doctoral Dissertation]. Loughborough University; 2013. Available from: https://dspace.lboro.ac.uk/2134/13521 ; http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.747867


Loughborough University

13. Mullath, Aravind. Process simulation and optimisation of thin wall injection moulded components.

Degree: PhD, 2013, Loughborough University

 Integrally moulded hinges and tension bands are important features in packaging components for plastic closures and their function is critically dependent on the flow induced… (more)

Subjects/Keywords: Poly propylene (PP); Injection moulding; Thin wall injection moulded parts; Hinges; Tension bands; MoldFlow; Design of experiments (DoE); In-cavity data; Packaging; PP nano-composites; Post consumer recyclate PP

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Mullath, A. (2013). Process simulation and optimisation of thin wall injection moulded components. (Doctoral Dissertation). Loughborough University. Retrieved from http://hdl.handle.net/2134/13521

Chicago Manual of Style (16th Edition):

Mullath, Aravind. “Process simulation and optimisation of thin wall injection moulded components.” 2013. Doctoral Dissertation, Loughborough University. Accessed January 23, 2020. http://hdl.handle.net/2134/13521.

MLA Handbook (7th Edition):

Mullath, Aravind. “Process simulation and optimisation of thin wall injection moulded components.” 2013. Web. 23 Jan 2020.

Vancouver:

Mullath A. Process simulation and optimisation of thin wall injection moulded components. [Internet] [Doctoral dissertation]. Loughborough University; 2013. [cited 2020 Jan 23]. Available from: http://hdl.handle.net/2134/13521.

Council of Science Editors:

Mullath A. Process simulation and optimisation of thin wall injection moulded components. [Doctoral Dissertation]. Loughborough University; 2013. Available from: http://hdl.handle.net/2134/13521

14. Amon, Martin. Računalniško modeliranje z vlakni ojačanih polimerov z metodo preslikave ortotropnih materialnih podatkov.

Degree: 2015, Univerza v Mariboru

Ojačani polimeri postajajo vodilni materiali na vseh področjih industrije, kjer je potreba po več serijskih izdelkih, ki hkrati zagotavljajo relativno veliko trdnost, majhno maso in… (more)

Subjects/Keywords: ojačani polimeri; kompoziti; vlakna; računalniške simulacije; metoda končnih elementov; trdnostne simulacije; simulacije brizganja; homogenizacija; interpolacijska preslikava; materialna nelinearnost; elasto-plastičnost; ortotropnost; Abaqus; Moldflow; reinforced polymers; composites; fibers; computer simulations; final element method; structural simulation; injection molding simulation; homogenisation; mapping; material non-linearity; elasto-plasticity; orthotrophy; Abaqus; Moldflow; info:eu-repo/classification/udc/004.94:678.7.017(043.2)

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Amon, M. (2015). Računalniško modeliranje z vlakni ojačanih polimerov z metodo preslikave ortotropnih materialnih podatkov. (Masters Thesis). Univerza v Mariboru. Retrieved from https://dk.um.si/IzpisGradiva.php?id=48324 ; https://dk.um.si/Dokument.php?id=72873&dn= ; https://plus.si.cobiss.net/opac7/bib/18867990?lang=sl

Chicago Manual of Style (16th Edition):

Amon, Martin. “Računalniško modeliranje z vlakni ojačanih polimerov z metodo preslikave ortotropnih materialnih podatkov.” 2015. Masters Thesis, Univerza v Mariboru. Accessed January 23, 2020. https://dk.um.si/IzpisGradiva.php?id=48324 ; https://dk.um.si/Dokument.php?id=72873&dn= ; https://plus.si.cobiss.net/opac7/bib/18867990?lang=sl.

MLA Handbook (7th Edition):

Amon, Martin. “Računalniško modeliranje z vlakni ojačanih polimerov z metodo preslikave ortotropnih materialnih podatkov.” 2015. Web. 23 Jan 2020.

Vancouver:

Amon M. Računalniško modeliranje z vlakni ojačanih polimerov z metodo preslikave ortotropnih materialnih podatkov. [Internet] [Masters thesis]. Univerza v Mariboru; 2015. [cited 2020 Jan 23]. Available from: https://dk.um.si/IzpisGradiva.php?id=48324 ; https://dk.um.si/Dokument.php?id=72873&dn= ; https://plus.si.cobiss.net/opac7/bib/18867990?lang=sl.

Council of Science Editors:

Amon M. Računalniško modeliranje z vlakni ojačanih polimerov z metodo preslikave ortotropnih materialnih podatkov. [Masters Thesis]. Univerza v Mariboru; 2015. Available from: https://dk.um.si/IzpisGradiva.php?id=48324 ; https://dk.um.si/Dokument.php?id=72873&dn= ; https://plus.si.cobiss.net/opac7/bib/18867990?lang=sl

15. Carlos Maurício Sacchelli. Comparação entre os resultados obtidos pelo processo de injeção de poli(Óxido de Metila) vesus simulação de injeção.

Degree: 2000, Universidade do Estado de Santa Catarina

 Este estudo é uma comparação entre os resultados obtidos pelo processo de injeção do copolímero poli (óxido de Metila) POM M90, produzido pelo Hoechst com… (more)

Subjects/Keywords: Processo de injeção; Simulação de injeção; Moldflow; Poliacetal-POM; Massa específica; ìndice de fluidez; Plastômetro de extrusão; POLIMEROS

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Sacchelli, C. M. (2000). Comparação entre os resultados obtidos pelo processo de injeção de poli(Óxido de Metila) vesus simulação de injeção. (Thesis). Universidade do Estado de Santa Catarina. Retrieved from http://www.tede.udesc.br/tde_busca/arquivo.php?codArquivo=162

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16th Edition):

Sacchelli, Carlos Maurício. “Comparação entre os resultados obtidos pelo processo de injeção de poli(Óxido de Metila) vesus simulação de injeção.” 2000. Thesis, Universidade do Estado de Santa Catarina. Accessed January 23, 2020. http://www.tede.udesc.br/tde_busca/arquivo.php?codArquivo=162.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7th Edition):

Sacchelli, Carlos Maurício. “Comparação entre os resultados obtidos pelo processo de injeção de poli(Óxido de Metila) vesus simulação de injeção.” 2000. Web. 23 Jan 2020.

Vancouver:

Sacchelli CM. Comparação entre os resultados obtidos pelo processo de injeção de poli(Óxido de Metila) vesus simulação de injeção. [Internet] [Thesis]. Universidade do Estado de Santa Catarina; 2000. [cited 2020 Jan 23]. Available from: http://www.tede.udesc.br/tde_busca/arquivo.php?codArquivo=162.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Sacchelli CM. Comparação entre os resultados obtidos pelo processo de injeção de poli(Óxido de Metila) vesus simulação de injeção. [Thesis]. Universidade do Estado de Santa Catarina; 2000. Available from: http://www.tede.udesc.br/tde_busca/arquivo.php?codArquivo=162

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

.