You searched for subject:(moisture)
.
Showing records 1 – 30 of
2465 total matches.
◁ [1] [2] [3] [4] [5] … [83] ▶
1.
Claflin, Amy Elizabeth.
Rapid Determination of Moisture and Fat in Meats By Microwave And Nuclear Magnetic Resonance Analysis.
Degree: 2013, Texas Digital Library
URL: http://hdl.handle.net/1969;
http://hdl.handle.net/2249.1/66559
► Determination of moisture, fat, protein, and other components of meat is important for the evaluation of the quality of raw materials and finished products, the…
(more)
▼ Determination of
moisture, fat, protein, and other components of meat is important for the evaluation of the quality of raw materials and finished products, the assessment of process control, and for ensuring regulatory compliance of meat products. Standard methods of analysis may be time- or labor-intensive, expensive, potentially harmful to the user or environment, or may require advanced training for operation of analytical equipment, but technology has allowed the introduction of more rapid methods that require less time, labor, skill, and cost. Microwave drying and nuclear magnetic resonance technologies for the determination of
moisture and fat in meat products, respectively, have been incorporated into the CEM Smart Trac 5 System??, an instrument designed for the rapid analysis of
moisture and fat in various food products.
The CEM Smart Trac 5 System??, approved as an AOAC Peer Verified Method, was used in a collaborative study for the rapid determination of
moisture and fat in a variety of raw and processed meat products of beef, pork, chicken, and turkey origin. The objective of the study was to determine if the CEM Smart Trac 5 System?? could analyze
moisture and fat in meat products with the same accuracy and precision as standard methods of analysis as specified by the Association of Official Analytical Chemists (AOAC). Meat products were obtained from various commercial sources, homogenized, and distributed to 10 collaborative laboratories. Each collaborative laboratory evaluated the fat and
moisture content of each meat product samples provided using the CEM Smart Trac 5 System??. Two standard methods of analysis, Forced Air Drying Method (AOAC Official Method 950.46) and Soxhlet Extraction of Crude Fat (AOAC Official Method 960.39), were performed on each sample for comparison to the Smart Trac 5 System??. Ten replicates were analyzed by the reference methods to achieve an analytical variance of no more than + 2%. Data collected from the reference methods for
moisture (AOAC 950.46) and fat (AOAC 960.39) were used for the calibration of each of the CEM Smart Trac 5 Systems?? and for comparison to the results produced by the Smart Trac 5 System?? in each of the collaborative laboratories.
The results indicated that the CEM Smart Trac 5 System?? compares favorably with the AOAC methods for
moisture and fat determination. The CEM Smart Trac 5 System?? would be suitable for the rapid determination of
moisture and fat in a variety of commercially produced raw and processed meat and poultry products. Statistical analysis confirmed the within-laboratory repeatability qualities of AOAC methods and provided a baseline for comparing the between-laboratory reproducibility potential of the CEM Smart Trac 5 System??.
For all samples evaluated, the within-laboratory (repeatability) results and between-laboratory (reproducibility) results for
moisture were acceptable. With the exception of low-fat ham, diluted low-fat ham, low-fat pork, diluted low-fat pork, diluted low-fat chicken, low-fat…
Advisors/Committee Members: Keeton, Jimmy T (advisor).
Subjects/Keywords: Moisture determination
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share





❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Claflin, A. E. (2013). Rapid Determination of Moisture and Fat in Meats By Microwave And Nuclear Magnetic Resonance Analysis. (Thesis). Texas Digital Library. Retrieved from http://hdl.handle.net/1969; http://hdl.handle.net/2249.1/66559
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Chicago Manual of Style (16th Edition):
Claflin, Amy Elizabeth. “Rapid Determination of Moisture and Fat in Meats By Microwave And Nuclear Magnetic Resonance Analysis.” 2013. Thesis, Texas Digital Library. Accessed January 16, 2021.
http://hdl.handle.net/1969; http://hdl.handle.net/2249.1/66559.
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
MLA Handbook (7th Edition):
Claflin, Amy Elizabeth. “Rapid Determination of Moisture and Fat in Meats By Microwave And Nuclear Magnetic Resonance Analysis.” 2013. Web. 16 Jan 2021.
Vancouver:
Claflin AE. Rapid Determination of Moisture and Fat in Meats By Microwave And Nuclear Magnetic Resonance Analysis. [Internet] [Thesis]. Texas Digital Library; 2013. [cited 2021 Jan 16].
Available from: http://hdl.handle.net/1969; http://hdl.handle.net/2249.1/66559.
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Council of Science Editors:
Claflin AE. Rapid Determination of Moisture and Fat in Meats By Microwave And Nuclear Magnetic Resonance Analysis. [Thesis]. Texas Digital Library; 2013. Available from: http://hdl.handle.net/1969; http://hdl.handle.net/2249.1/66559
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
2.
Shakiba, Maryam.
A Continuum Coupled Moisture-mechanical Constitutive Model for Asphalt Concrete.
Degree: 2013, Texas Digital Library
URL: http://hdl.handle.net/1969;
http://hdl.handle.net/2249.1/66856
► The presence and flow of moisture degrade engineering properties of asphalt concrete as part of thermodynamic, chemical, physical, and mechanical processes. This detrimental effect is…
(more)
▼ The presence and flow of
moisture degrade engineering properties of asphalt concrete as part of thermodynamic, chemical, physical, and mechanical processes. This detrimental effect is referred to as
moisture damage. The aim of this dissertation is the development of physically based constitutive relationships along with a computational tool for the fundamental analysis of combined mechanical and
moisture induced damage of asphalt concrete. Such a tool can greatly contribute to an improved material selection procedure and give insight into the various damage inducing mechanisms in asphalt concrete.
In this dissertation, thermo-hygro-mechanical constitutive relationships are developed based on the principle of virtual power and laws of thermodynamics in order to simulate
moisture-induced damage of asphalt concrete. An evolution function is proposed to consider the detrimental effect of
moisture diffusion and presence inside the material. The effect of pore water pressure is incorporated using Biot???s coefficient. The Continuum Damage Mechanics (CDM) theory is extended to Continuum
Moisture-Mechanical Damage Mechanics (CMMDM) to incorporate the
moisture degradation effect and couple it to the mechanical response of asphalt concrete. The proposed
moisture damage constitutive relationships are implemented in the Pavement Analysis using Nonlinear Damage Approach (PANDA) finite element (FE) package to model the
moisture damage effect on the complex environmental-mechanical response of asphalt concrete. The developed constitutive relationship and framework are validated over different loading scenarios and a range of experimental measurements.
The developed constitutive relationship and framework are applied to simulate pavement performance. The focus is on investigating the effects of various
moisture conditioning periods on permanent deformation (rutting) and fatigue damage of asphalt pavements.
The constitutive and computational models are used to develop a framework for the simulation of the effect of
moisture on the microstructural response of asphalt concrete. This framework explicitly incorporates the material microstructural distribution and properties. The developed framework is used to perform two-dimensional (2D) and three-dimensional (3D) micromechanical simulations in order to study and investigate the capability of the proposed constitutive relationships to predict the microstructural response of asphalt concrete under combined effect of
moisture diffusion and mechanical loading.
Advisors/Committee Members: Little, Dallas (advisor).
Subjects/Keywords: Moisture Damage
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share





❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Shakiba, M. (2013). A Continuum Coupled Moisture-mechanical Constitutive Model for Asphalt Concrete. (Thesis). Texas Digital Library. Retrieved from http://hdl.handle.net/1969; http://hdl.handle.net/2249.1/66856
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Chicago Manual of Style (16th Edition):
Shakiba, Maryam. “A Continuum Coupled Moisture-mechanical Constitutive Model for Asphalt Concrete.” 2013. Thesis, Texas Digital Library. Accessed January 16, 2021.
http://hdl.handle.net/1969; http://hdl.handle.net/2249.1/66856.
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
MLA Handbook (7th Edition):
Shakiba, Maryam. “A Continuum Coupled Moisture-mechanical Constitutive Model for Asphalt Concrete.” 2013. Web. 16 Jan 2021.
Vancouver:
Shakiba M. A Continuum Coupled Moisture-mechanical Constitutive Model for Asphalt Concrete. [Internet] [Thesis]. Texas Digital Library; 2013. [cited 2021 Jan 16].
Available from: http://hdl.handle.net/1969; http://hdl.handle.net/2249.1/66856.
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Council of Science Editors:
Shakiba M. A Continuum Coupled Moisture-mechanical Constitutive Model for Asphalt Concrete. [Thesis]. Texas Digital Library; 2013. Available from: http://hdl.handle.net/1969; http://hdl.handle.net/2249.1/66856
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Central Connecticut State University
3.
Warchol, Anna Z., 1980-.
Soil Moisture Characteristic due to Density Changes : Measurements and Predictions applying the RETC Computer Program.
Degree: Department of Engineering Technology, 2015, Central Connecticut State University
URL: http://content.library.ccsu.edu/u?/ccsutheses,2219
► A series of seven hanging column tests were conducted at Central Connecticut State University (CCSU) on a two soil samples collected from Southington, CT and…
(more)
▼ A series of seven hanging column tests were conducted at Central Connecticut State University (CCSU) on a two soil samples collected from Southington, CT and Portland, CT. For each soil sample, the gradation, plasticity characteristic, and specific gravity were measured to classify the soil by the ASTM D2487-06 Unified Soil Classification System (USCS) and the United States Department of Agriculture, National Cooperative Soil Survey (USDA) procedures. The hanging column test results were used to find the relationship between the soil suction (ψ), and the water content of the soil (θ). The soil suction to soil moisture relationship can be described mathematically as a curve from the point of saturation to dry soil conditions, this is the soil suction – moisture (water) characteristic curve. An air dry vapor equilibrium test was used to provide supplemental soil moisture data. The measured soil suction and water content data were used to fit to the van Genuchten (1980) equation, and the Brooks and Corey (1964) equation using the US Salinity Laboratory, RETention Curve (RETC) computer program (van Genuchten et al 1991). The test data was evaluated with the computer program to compute equation parameters for seven soil moisture characteristic equations. From this data, total porosity and soil water retention at 0.33 kPa, 147 kPa and 1500 kPa were developed. Comparisons with published soil suction – moisture characteristic properties were performed.
"Submitted in Partial Fulfillment of the Requirements for the Degree of Master [of] Science in Engineering Technology, Department of Engineering Technology."; Thesis advisor: Clifford E. Anderson.; M.S.,Central Connecticut State University,,2015.;
Advisors/Committee Members: Anderson, Clifford E..
Subjects/Keywords: Soil moisture.
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share





❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Warchol, Anna Z., 1. (2015). Soil Moisture Characteristic due to Density Changes : Measurements and Predictions applying the RETC Computer Program. (Thesis). Central Connecticut State University. Retrieved from http://content.library.ccsu.edu/u?/ccsutheses,2219
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Chicago Manual of Style (16th Edition):
Warchol, Anna Z., 1980-. “Soil Moisture Characteristic due to Density Changes : Measurements and Predictions applying the RETC Computer Program.” 2015. Thesis, Central Connecticut State University. Accessed January 16, 2021.
http://content.library.ccsu.edu/u?/ccsutheses,2219.
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
MLA Handbook (7th Edition):
Warchol, Anna Z., 1980-. “Soil Moisture Characteristic due to Density Changes : Measurements and Predictions applying the RETC Computer Program.” 2015. Web. 16 Jan 2021.
Vancouver:
Warchol, Anna Z. 1. Soil Moisture Characteristic due to Density Changes : Measurements and Predictions applying the RETC Computer Program. [Internet] [Thesis]. Central Connecticut State University; 2015. [cited 2021 Jan 16].
Available from: http://content.library.ccsu.edu/u?/ccsutheses,2219.
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Council of Science Editors:
Warchol, Anna Z. 1. Soil Moisture Characteristic due to Density Changes : Measurements and Predictions applying the RETC Computer Program. [Thesis]. Central Connecticut State University; 2015. Available from: http://content.library.ccsu.edu/u?/ccsutheses,2219
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

University of Texas – Austin
4.
Halley, Chelsea Jenna.
Laboratory calibration of the CS655 soil moisture sensor.
Degree: MSin Energy and Earth Resources, Energy and Earth Resources, 2016, University of Texas – Austin
URL: http://hdl.handle.net/2152/65481
► Calibration of a frequency domain reflectometer (model CS655, Campbell Scientific, Inc. Logan, UT) is presented using five distinct soil types and three different calibration methods.…
(more)
▼ Calibration of a frequency domain reflectometer (model CS655, Campbell Scientific, Inc. Logan, UT) is presented using five distinct soil types and three different calibration methods. Frequency domain reflectometers estimate soil water content (SWC) using electromagnetic properties of the surrounding media. Few, if any, sensors directly measure volumetric water content. Instead, a sensor’s output must be converted either by a universal or a user-specific calibration equation. These sensors are used for a variety of applications using a factory-supplied equation with an error of 0.03 m³m⁻³. Soil specific properties such as clay content and salinity can affect their performance in field situations. A site or soil specific calibration can provide more accurate measurements albeit at greater time and expense. For this research, three calibration methods on five central Texas soils were evaluated to determine soil-specific calibration equations. First, a standard calibration method was performed by packing soil cores with soil at progressively higher SWC, inserting the probe vertically, and taking repeated measurements. Next, an upward infiltration method was used to slowly introduce water at the bottom of the soil core performed on soil cores with vertically inserted probes. Lastly, a downward infiltration method was performed by introducing known amounts of water to the top of the soil core with a vertically inserted probe and allowing infiltration and redistribution between subsequent water additions. The data from all three methods were fitted to a third-order polynomial, based on the relationship between the dielectric permittivity and the SWC. Overall, the CS655 performance across all five soils improved from a root mean square error (RMSE) of 0.065 and 0.042 m³m⁻³ using standard and downward calibrations, respectively, to 0.026 and 0.024 m³m⁻³ using a site-wide calibration. Results further indicate that the soil-specific calibration curves provide better fits than the commonly-used Topp’s equation, and that the coefficients in the soil-specific curve differ significantly (p<0.05). The research presented here improves our understanding of the CS655 sensor, and the calibration curve needed to improve field-based measurements currently occurring across the Texas Soil Observation Network.
Advisors/Committee Members: Young, Michael H. (advisor), Caldwell, Todd G. (advisor), Kreitler, Charles (committee member).
Subjects/Keywords: Soil moisture
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share





❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Halley, C. J. (2016). Laboratory calibration of the CS655 soil moisture sensor. (Masters Thesis). University of Texas – Austin. Retrieved from http://hdl.handle.net/2152/65481
Chicago Manual of Style (16th Edition):
Halley, Chelsea Jenna. “Laboratory calibration of the CS655 soil moisture sensor.” 2016. Masters Thesis, University of Texas – Austin. Accessed January 16, 2021.
http://hdl.handle.net/2152/65481.
MLA Handbook (7th Edition):
Halley, Chelsea Jenna. “Laboratory calibration of the CS655 soil moisture sensor.” 2016. Web. 16 Jan 2021.
Vancouver:
Halley CJ. Laboratory calibration of the CS655 soil moisture sensor. [Internet] [Masters thesis]. University of Texas – Austin; 2016. [cited 2021 Jan 16].
Available from: http://hdl.handle.net/2152/65481.
Council of Science Editors:
Halley CJ. Laboratory calibration of the CS655 soil moisture sensor. [Masters Thesis]. University of Texas – Austin; 2016. Available from: http://hdl.handle.net/2152/65481

Oregon State University
5.
Belart Lengerich, Maria Francisca.
Forest Harvest Residue Moisture Management in the Pacific Northwest, USA.
Degree: PhD, Sustainable Forest Management, 2016, Oregon State University
URL: http://hdl.handle.net/1957/59544
► Moisture content management is a key requirement to improve forest harvest residue economics for bioenergy production. This dissertation aims to contribute towards better management through…
(more)
▼ Moisture content management is a key requirement to improve forest harvest residue economics for bioenergy production. This dissertation aims to contribute towards better management through these three general objectives (1) Determine average
moisture content of fresh forest harvest residues and its changes over the different seasons of the year, focusing on the three main commercial forest species growing in the Pacific Northwest, (2) Determine in-forest stored drying rates of this material for two harvest systems and the same species specified in objective (1) and (3) Determine the cost effectiveness of in-forest drying for two harvest systems and the advantages of drier material when its energy content is considered at a cogeneration facility.
A repeated measures experimental design was conducted to determine average branch
moisture content in live trees during each season of the year in four different locations in Oregon. At the same time, an innovative sampling protocol was employed to determine
moisture content for in-forest stored of piled and scattered harvest residues for one year in four different Oregon sites. These data were used to calibrate finite element analysis (FEA) models to predict residue drying rates based on weather information such as temperature, relative humidity,
precipitation and wind velocity. Finally, one of the FEA models was used to determine drying rates on real Douglas-fir units harvested with different harvest systems (a case study). These harvest units were employed to set a mixed integer linear program to optimally deliver harvest residues to a hypothetical cogeneration plant over 24 periods (months) and determine processing and transport costs.
Major findings indicate that from all sites, the highest
moisture recorded was 50% (wet basis) in ponderosa pine during the winter; the lowest was 43% in the summer for both the same ponderosa pine and Willamette Valley Douglas-fir. When compared by season, ponderosa pine had significantly higher
moisture content in the winter than in other seasons (1.6 to 9.8% higher). Summer
moisture content was also significantly lower than fall
moisture content for ponderosa pine (5.4 to 2.5% lower). Willamette Valley Douglas-fir had significantly lower
moisture content during summer than during other seasons (0.8 to 3.9% lower).
FEA models were successfully developed to determine drying rates for four different climate regions in Oregon. These models were compared with data obtained in the field and statistical tests show model agreement with correlations between 0.56 and 0.92 (Kendall’s tau) on all sites.
The harvest residue generated from the case study was sufficient to optimally deliver the necessary volume to supply 63% of a hypothetical 6 MW-hr cogeneration plant. Approximately 98% of the harvest residue generated with cable logging system was delivered to the plant compared with only 56% of the residue generated with a ground-based system. By considering the energy content of drier residues, the amount of ODMT needed to supply the plant…
Advisors/Committee Members: Sessions, John (advisor), Madsen, Lisa (committee member).
Subjects/Keywords: Moisture content; Slash (Logging) – Moisture – Northwest, Pacific
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share





❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Belart Lengerich, M. F. (2016). Forest Harvest Residue Moisture Management in the Pacific Northwest, USA. (Doctoral Dissertation). Oregon State University. Retrieved from http://hdl.handle.net/1957/59544
Chicago Manual of Style (16th Edition):
Belart Lengerich, Maria Francisca. “Forest Harvest Residue Moisture Management in the Pacific Northwest, USA.” 2016. Doctoral Dissertation, Oregon State University. Accessed January 16, 2021.
http://hdl.handle.net/1957/59544.
MLA Handbook (7th Edition):
Belart Lengerich, Maria Francisca. “Forest Harvest Residue Moisture Management in the Pacific Northwest, USA.” 2016. Web. 16 Jan 2021.
Vancouver:
Belart Lengerich MF. Forest Harvest Residue Moisture Management in the Pacific Northwest, USA. [Internet] [Doctoral dissertation]. Oregon State University; 2016. [cited 2021 Jan 16].
Available from: http://hdl.handle.net/1957/59544.
Council of Science Editors:
Belart Lengerich MF. Forest Harvest Residue Moisture Management in the Pacific Northwest, USA. [Doctoral Dissertation]. Oregon State University; 2016. Available from: http://hdl.handle.net/1957/59544

Montana Tech
6.
Johnson, Adam Collier.
Controls on the Spatial-temporal distribution of soil moisture under snow dominated conditions in a naturally vegetated, sub-alpine mountain catchment.
Degree: MS, 2012, Montana Tech
URL: https://scholarworks.umt.edu/etd/1371
► Soil moisture processes in the top soil is a pivotal element in the terrestrial phase of the hydrologic cycle over a wide range of scales.…
(more)
▼ Soil moisture processes in the top soil is a pivotal element in the terrestrial phase of the hydrologic cycle over a wide range of scales. At the plot scale, soil moisture exerts a strong control on runoff, evapotranspiration, and the transfer of water to deeper soil levels and aquifers. It affects the heat capacity of the soil and determines important ecological and geochemical processes such as the distribution of soil microbial communities, mineralization rates or soil respiration. The mechanisms that control soil moisture dynamics are controversial, varying for different regions and scales. Most understanding comes from research on water-limited systems that may not be applicable in snow-driven systems. This study presents a field investigation on the dynamics that control the distribution of soil moisture at the plot scale in a snow-dominated sub-alpine catchment. The research experimentally validates previous modeling studies and determines whether evapotranspiration (extractive, energy-driven controls) is the main generator of soil moisture heterogeneity vs. differential snowmelt (additive control). The field study site, located in the Bitterroot Mountains, Montana, is instrumented with soil moisture/temperature sensors, meteorological station, and sap flux system monitoring an Engelmann Spruce. Results show that the highest heterogeneity in moisture occurs at intermediate water contents resulting from the spring snowmelt driven wetting process while the lowest heterogeneity occurs at the early fall conclusion of the drying season. The presence of the tree canopy alters the spatial distribution of precipitation and snowmelt and results in a dampening of weather induced soil moisture variability under canopies in comparison to open areas. We show that spatial distribution of precipitation and snowmelt (additive processes) are a stronger control on the generation of heterogeneity in soil moisture than evapotranspiration (extractive processes) in a snow dominated environment.
Subjects/Keywords: soil moisture; soil moisture distribution; soil water
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share





❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Johnson, A. C. (2012). Controls on the Spatial-temporal distribution of soil moisture under snow dominated conditions in a naturally vegetated, sub-alpine mountain catchment. (Masters Thesis). Montana Tech. Retrieved from https://scholarworks.umt.edu/etd/1371
Chicago Manual of Style (16th Edition):
Johnson, Adam Collier. “Controls on the Spatial-temporal distribution of soil moisture under snow dominated conditions in a naturally vegetated, sub-alpine mountain catchment.” 2012. Masters Thesis, Montana Tech. Accessed January 16, 2021.
https://scholarworks.umt.edu/etd/1371.
MLA Handbook (7th Edition):
Johnson, Adam Collier. “Controls on the Spatial-temporal distribution of soil moisture under snow dominated conditions in a naturally vegetated, sub-alpine mountain catchment.” 2012. Web. 16 Jan 2021.
Vancouver:
Johnson AC. Controls on the Spatial-temporal distribution of soil moisture under snow dominated conditions in a naturally vegetated, sub-alpine mountain catchment. [Internet] [Masters thesis]. Montana Tech; 2012. [cited 2021 Jan 16].
Available from: https://scholarworks.umt.edu/etd/1371.
Council of Science Editors:
Johnson AC. Controls on the Spatial-temporal distribution of soil moisture under snow dominated conditions in a naturally vegetated, sub-alpine mountain catchment. [Masters Thesis]. Montana Tech; 2012. Available from: https://scholarworks.umt.edu/etd/1371

Oklahoma State University
7.
Jayathunga Mudiyanselage, Lahiru.
Effect of moisture level in plate thermometer insulation on the measurement of incident radiant heat flux.
Degree: Engineering Technology, 2020, Oklahoma State University
URL: http://hdl.handle.net/11244/325547
► The purpose of the current study was to elucidate the fluctuations of calculated heat fluxes based on two independent conditions of the insulation layers of…
(more)
▼ The purpose of the current study was to elucidate the fluctuations of calculated heat fluxes based on two independent conditions of the insulation layers of the plate thermometer (PT). An equation developed using ideal surface temperature was used to calculate the incident radiant heat flux from the PT. A Schmidt-Boelter type radiometer was used in validating calculated incident radiant heat flux from the subjected PT. The effect of changing the microphysical properties of insulation layers upon the temperature was investigated in the first phase of the research. The calculated and measured incident radiant heat fluxes seemed to be overlapping with each other in a preheated PT despite the comparatively wider difference between the same parameters of an unheated PT. The second stage was to evaluate the changes of calculated incident radiant heat flux against the inherent
moisture percentages of respective insulation layers. Four
moisture percentages were identified as conditions representing distinct climatic conditions in Stillwater, Oklahoma; the
moisture percentages are equivalent to wood
moisture equivalent (%WME) 0, 45, 65, and 98. The results show that there was no significant difference of incident radiant heat fluxes measured with a radiometer and calculated using PT within 0 to 65 %WME. Further, the noticeable difference between the incident radiant heat flux with 98 %WME was caused due to the significant vaporization energy consumed from the
moisture inside the PT insulations. The optimum possible weather condition for the highest %EMC was considered. Accuracy of the measured incident radiant heat flux was checked with the respective %WME values. To conclude, the researchers recommended using preheated PT with any
moisture percentage under 65 %WME to obtain accurate enough incident radiant heat flux measurements.
Advisors/Committee Members: Park, Haejun (advisor), Agnew, Rob (committee member), Charter, Virginia (committee member).
Subjects/Keywords: equilibrium moisture content (emc); moisture content; moisture in insulation; plate thermometer; wood moisture equivalent (wme)
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share





❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Jayathunga Mudiyanselage, L. (2020). Effect of moisture level in plate thermometer insulation on the measurement of incident radiant heat flux. (Thesis). Oklahoma State University. Retrieved from http://hdl.handle.net/11244/325547
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Chicago Manual of Style (16th Edition):
Jayathunga Mudiyanselage, Lahiru. “Effect of moisture level in plate thermometer insulation on the measurement of incident radiant heat flux.” 2020. Thesis, Oklahoma State University. Accessed January 16, 2021.
http://hdl.handle.net/11244/325547.
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
MLA Handbook (7th Edition):
Jayathunga Mudiyanselage, Lahiru. “Effect of moisture level in plate thermometer insulation on the measurement of incident radiant heat flux.” 2020. Web. 16 Jan 2021.
Vancouver:
Jayathunga Mudiyanselage L. Effect of moisture level in plate thermometer insulation on the measurement of incident radiant heat flux. [Internet] [Thesis]. Oklahoma State University; 2020. [cited 2021 Jan 16].
Available from: http://hdl.handle.net/11244/325547.
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Council of Science Editors:
Jayathunga Mudiyanselage L. Effect of moisture level in plate thermometer insulation on the measurement of incident radiant heat flux. [Thesis]. Oklahoma State University; 2020. Available from: http://hdl.handle.net/11244/325547
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Massey University
8.
Holmes, Wayne S.
Lumber moisture measurement using a six-port reflectometer and waveguide aperture array : a thesis submitted in fulfilment of the requirements for the degree of Master of Engineering, Massey University
.
Degree: 2013, Massey University
URL: http://hdl.handle.net/10179/4707
► This Thesis covers the development of a six-port and slotted waveguide based measurement system for the determination of the variation of moisture content (mc) of…
(more)
▼ This Thesis covers the development of a six-port and slotted waveguide based measurement system for the determination of the variation of moisture content (mc) of stacked lumber. A Six-port reflectometer was developed and used throughout the trials incorporating an automatic calibration system. This was implemented using switched coaxial standards, producing improvement in the long term stability of the six-port.
In addition the measurement of the dielectric properties of the typical lumber types of Heartwood, Sapwood and internal Branches is examined. Measurements were made using the waveguide cell technique covering the frequency range of 2.3 to 6.5GHz. Additional work was undertaken to establish a method to correct these measurements for variations in basic density and Earlywood \Latewood banding, giving rise to a potential moisture content estimation error of 0.63%.
Both an explicit first order model and multivariate regression analysis of the sensor was proposed and experimental results presented for lumber mc spanning the range of 10 to 180% by dry basis. From these trials a mc measurement error of 3% for the explicit model and 2% for regression of individual boards covering the sensor was determined without incorporating density effects.
Subjects/Keywords: Waveguide;
Lumber moisture content;
Timber moisture content;
Wood moisture content;
Reflectometer;
Six-port reflectometer;
Permittivity
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share





❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Holmes, W. S. (2013). Lumber moisture measurement using a six-port reflectometer and waveguide aperture array : a thesis submitted in fulfilment of the requirements for the degree of Master of Engineering, Massey University
. (Thesis). Massey University. Retrieved from http://hdl.handle.net/10179/4707
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Chicago Manual of Style (16th Edition):
Holmes, Wayne S. “Lumber moisture measurement using a six-port reflectometer and waveguide aperture array : a thesis submitted in fulfilment of the requirements for the degree of Master of Engineering, Massey University
.” 2013. Thesis, Massey University. Accessed January 16, 2021.
http://hdl.handle.net/10179/4707.
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
MLA Handbook (7th Edition):
Holmes, Wayne S. “Lumber moisture measurement using a six-port reflectometer and waveguide aperture array : a thesis submitted in fulfilment of the requirements for the degree of Master of Engineering, Massey University
.” 2013. Web. 16 Jan 2021.
Vancouver:
Holmes WS. Lumber moisture measurement using a six-port reflectometer and waveguide aperture array : a thesis submitted in fulfilment of the requirements for the degree of Master of Engineering, Massey University
. [Internet] [Thesis]. Massey University; 2013. [cited 2021 Jan 16].
Available from: http://hdl.handle.net/10179/4707.
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Council of Science Editors:
Holmes WS. Lumber moisture measurement using a six-port reflectometer and waveguide aperture array : a thesis submitted in fulfilment of the requirements for the degree of Master of Engineering, Massey University
. [Thesis]. Massey University; 2013. Available from: http://hdl.handle.net/10179/4707
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Oregon State University
9.
Jibury, Falih Khidir.
Variations of moisture retention properties and bulk densities of soils between and within soil-mapping units in central Oregon.
Degree: MS, Soils, 1958, Oregon State University
URL: http://hdl.handle.net/1957/10026
► The objective of this study was to estimate the bulk densities and points on the moisture-tension curves and to determine their associated variances for some…
(more)
▼ The objective of this study was to estimate the bulk densities and points on the
moisture-tension curves and to determine their associated variances for some of the selected mapping units in Central Oregon. These variances will produce informations concerning the precision of the mean and the optimum sampling schemes, for other similar soils. Disturbed and undisturbed samples taken from random locations have been analyzed separately for the 0.1-, 0.5-, 1.0-, 5-, 10- and 15-bar
moisture percentages and bulk density for the two depths. From the bulk-density values, 0.1- and 15-bar percentages, the amount of
moisture held between 0.1 and 15 bars was calculated. Variances among and within locations in a particular mapping unit were calculated also. According to the data which were obtained, it appears that Deschutes and Redmond soils practically, are very similar in their bulk density and
moisture retention properties. Therefore, due to these similarities, it would be expected that the irrigation scheduling would be about the same for a specific crop. The variances among and within locations were of the same
order of magnitude. Using these variances it was calculated that the optimum number of sites per location for bulk density and
15-bar percentage was 2, as used in this study. The limits about the mean for a mapping unit which would include different
percentages of randomly selected locations within a mapping unit are presented in this thesis. It could be noticed that the mean
for the mapping unit may be a rough estimate for a given location; therefore, the number of samples required to estimate the true mean
of a location, within different percentages and 5 percent significance level are presented also.
Advisors/Committee Members: Evans, D. D. (advisor).
Subjects/Keywords: Soil moisture
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share





❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Jibury, F. K. (1958). Variations of moisture retention properties and bulk densities of soils between and within soil-mapping units in central Oregon. (Masters Thesis). Oregon State University. Retrieved from http://hdl.handle.net/1957/10026
Chicago Manual of Style (16th Edition):
Jibury, Falih Khidir. “Variations of moisture retention properties and bulk densities of soils between and within soil-mapping units in central Oregon.” 1958. Masters Thesis, Oregon State University. Accessed January 16, 2021.
http://hdl.handle.net/1957/10026.
MLA Handbook (7th Edition):
Jibury, Falih Khidir. “Variations of moisture retention properties and bulk densities of soils between and within soil-mapping units in central Oregon.” 1958. Web. 16 Jan 2021.
Vancouver:
Jibury FK. Variations of moisture retention properties and bulk densities of soils between and within soil-mapping units in central Oregon. [Internet] [Masters thesis]. Oregon State University; 1958. [cited 2021 Jan 16].
Available from: http://hdl.handle.net/1957/10026.
Council of Science Editors:
Jibury FK. Variations of moisture retention properties and bulk densities of soils between and within soil-mapping units in central Oregon. [Masters Thesis]. Oregon State University; 1958. Available from: http://hdl.handle.net/1957/10026

Oregon State University
10.
Chen, Tsu-fang.
The effect of soil moisture tension on the transpiration rate of a young sunflower when irrigated by a condensation method.
Degree: MS, Agricultural Engineering, 1958, Oregon State University
URL: http://hdl.handle.net/1957/20200
Subjects/Keywords: Soil moisture
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share





❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Chen, T. (1958). The effect of soil moisture tension on the transpiration rate of a young sunflower when irrigated by a condensation method. (Masters Thesis). Oregon State University. Retrieved from http://hdl.handle.net/1957/20200
Chicago Manual of Style (16th Edition):
Chen, Tsu-fang. “The effect of soil moisture tension on the transpiration rate of a young sunflower when irrigated by a condensation method.” 1958. Masters Thesis, Oregon State University. Accessed January 16, 2021.
http://hdl.handle.net/1957/20200.
MLA Handbook (7th Edition):
Chen, Tsu-fang. “The effect of soil moisture tension on the transpiration rate of a young sunflower when irrigated by a condensation method.” 1958. Web. 16 Jan 2021.
Vancouver:
Chen T. The effect of soil moisture tension on the transpiration rate of a young sunflower when irrigated by a condensation method. [Internet] [Masters thesis]. Oregon State University; 1958. [cited 2021 Jan 16].
Available from: http://hdl.handle.net/1957/20200.
Council of Science Editors:
Chen T. The effect of soil moisture tension on the transpiration rate of a young sunflower when irrigated by a condensation method. [Masters Thesis]. Oregon State University; 1958. Available from: http://hdl.handle.net/1957/20200

Oregon State University
11.
Guo, Ning.
Hygro-mechanical response of clear softwood specimens to compression under cyclic climate.
Degree: MS, Wood Science, 2009, Oregon State University
URL: http://hdl.handle.net/1957/13072
► Hygro-mechanical effect is a general term applied to all phenomena that involves interaction between moisture content and mechanical characteristics of hygroscopic materials by analogy to…
(more)
▼ Hygro-mechanical effect is a general term applied to all phenomena that involves interaction between
moisture content and mechanical characteristics of hygroscopic materials by analogy to thermo-mechanical effects. The hygromechanical effects include (but are not limited to) free shrinkage/swelling, effect of
moisture on elastic modulus, strength, creep, failure mechanisms, and mechano sorption. Of those, the particular focus of this project was the mechano-sorptive effect, which is observed as an additional deformation when wooden materials are exposed to combined mechanical loading and
moisture content changes.
The principle objective of this research program is to create a systematic database of clearly defined hygro-mechanical characteristics for commonly used wood species. Such database is needed for accurate modeling and prediction of long-term behavior of wood and wood-based materials in structures exposed to changing environment. The specimens in this program included four softwood species: Red spruce, Douglas fir, Western hemlock and Ponderosa pine. In this project, small longitudinal specimens were exposed to compression stress along the longitudinal axis (16-22% of the ultimate compressive stress) at room temperature (about 22±1° C) and varying
moisture contents (MC). Cyclic changes of MC were executed in a small climate chamber by varying the relative humidity (RH) between 90% and lower RH (40%-50%). Free shrinkage and swelling was measured on unloaded reference specimens exposed to the same conditions. In a separate reference test series, specimens were subjected to sustained compressive load at a constant humidity of 65%, in order to determine the effect of visco-elastic deformation. Some specimens for this reference tests were wrapped in Parafilm in order to protect them from even small variations of the ambient humidity. All deformations were measured by comparing successive digital images of the specimens using digital image correlation (DIC) software. The mechano-sorptive deformation characteristics were calculated by subtracting the free swelling/shrinkage and visco-elastic deformation determined on the reference specimens and specimens tested in constant humidity, respectively, from the total deformation measured on the loaded specimens tested in cyclic climate. Apart from the mechano-sorptive characteristics, the output of the test protocol included: 1) free shrinkage/swelling coefficients for longitudinal and radial directions, determined on reference specimens; and 2) elastic modulus for compression in longitudinal direction and related Poisson ratios.
Advisors/Committee Members: Muszynski, Lech (advisor), Kamke, Fred (committee member).
Subjects/Keywords: hygro-mechanical effect; Pinaceae – Moisture
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share





❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Guo, N. (2009). Hygro-mechanical response of clear softwood specimens to compression under cyclic climate. (Masters Thesis). Oregon State University. Retrieved from http://hdl.handle.net/1957/13072
Chicago Manual of Style (16th Edition):
Guo, Ning. “Hygro-mechanical response of clear softwood specimens to compression under cyclic climate.” 2009. Masters Thesis, Oregon State University. Accessed January 16, 2021.
http://hdl.handle.net/1957/13072.
MLA Handbook (7th Edition):
Guo, Ning. “Hygro-mechanical response of clear softwood specimens to compression under cyclic climate.” 2009. Web. 16 Jan 2021.
Vancouver:
Guo N. Hygro-mechanical response of clear softwood specimens to compression under cyclic climate. [Internet] [Masters thesis]. Oregon State University; 2009. [cited 2021 Jan 16].
Available from: http://hdl.handle.net/1957/13072.
Council of Science Editors:
Guo N. Hygro-mechanical response of clear softwood specimens to compression under cyclic climate. [Masters Thesis]. Oregon State University; 2009. Available from: http://hdl.handle.net/1957/13072

Technical University of Lisbon
12.
Pinto, Ana Rita Marques.
Avaliação do processo de secagem no fabrico de malte: caso de estudo da Sociedade Central de Cervejas e Bebidas, SA.
Degree: 2013, Technical University of Lisbon
URL: https://www.rcaap.pt/detail.jsp?id=oai:www.repository.utl.pt:10400.5/5678
► Mestrado em Engenharia Alimentar - Processamento de Alimentos - Instituto Superior de Agronomia
In beer production, barley grains are previously converted into malt. During malting,…
(more)
▼ Mestrado em Engenharia Alimentar - Processamento de Alimentos - Instituto Superior de Agronomia
In beer production, barley grains are previously converted into malt. During malting, the high energy cost is mainly due to the kilning stage. In order to reduce this consumption, the possibility of reducing the duration of kilning was studied. This reduction involves obtaining malt with an higher moisture content than what is actually produced. For this purpose, it was analyzed the influence of drying program in moisture content and in other characteristics of malt.
Drying assays was performed, wherein the malt was subjected to different temperature programs, which allowed obtaining malt with different moisture contents. Physical and chemical malt characteristics were analyzed and related to the moisture content and temperature program. Kilning profiles of the drying chambers were established in order to acess the possibility of reduce drying time.
The results suggest the possibility to increase the moisture content of malt up to 8% because up to this value, every characteristics analyzed are within the limits established. It isn´t possible to reduce the kilning time since the moisture loss from malt sublayers are very heterogeneous and this moisture difference remains until the end of the process.
Advisors/Committee Members: Barros, Sara Beirão da Costa Teixeira, Mendes, João Paulo de Sousa Reis.
Subjects/Keywords: barley; malt; malting; kilning; moisture
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share





❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Pinto, A. R. M. (2013). Avaliação do processo de secagem no fabrico de malte: caso de estudo da Sociedade Central de Cervejas e Bebidas, SA. (Thesis). Technical University of Lisbon. Retrieved from https://www.rcaap.pt/detail.jsp?id=oai:www.repository.utl.pt:10400.5/5678
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Chicago Manual of Style (16th Edition):
Pinto, Ana Rita Marques. “Avaliação do processo de secagem no fabrico de malte: caso de estudo da Sociedade Central de Cervejas e Bebidas, SA.” 2013. Thesis, Technical University of Lisbon. Accessed January 16, 2021.
https://www.rcaap.pt/detail.jsp?id=oai:www.repository.utl.pt:10400.5/5678.
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
MLA Handbook (7th Edition):
Pinto, Ana Rita Marques. “Avaliação do processo de secagem no fabrico de malte: caso de estudo da Sociedade Central de Cervejas e Bebidas, SA.” 2013. Web. 16 Jan 2021.
Vancouver:
Pinto ARM. Avaliação do processo de secagem no fabrico de malte: caso de estudo da Sociedade Central de Cervejas e Bebidas, SA. [Internet] [Thesis]. Technical University of Lisbon; 2013. [cited 2021 Jan 16].
Available from: https://www.rcaap.pt/detail.jsp?id=oai:www.repository.utl.pt:10400.5/5678.
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Council of Science Editors:
Pinto ARM. Avaliação do processo de secagem no fabrico de malte: caso de estudo da Sociedade Central de Cervejas e Bebidas, SA. [Thesis]. Technical University of Lisbon; 2013. Available from: https://www.rcaap.pt/detail.jsp?id=oai:www.repository.utl.pt:10400.5/5678
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Oregon State University
13.
Chinn, Clarence Edward.
Techniques for evaluating certain physical properties of soil moisture.
Degree: PhD, Soils, 1956, Oregon State University
URL: http://hdl.handle.net/1957/51000
Subjects/Keywords: Soil moisture
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share





❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Chinn, C. E. (1956). Techniques for evaluating certain physical properties of soil moisture. (Doctoral Dissertation). Oregon State University. Retrieved from http://hdl.handle.net/1957/51000
Chicago Manual of Style (16th Edition):
Chinn, Clarence Edward. “Techniques for evaluating certain physical properties of soil moisture.” 1956. Doctoral Dissertation, Oregon State University. Accessed January 16, 2021.
http://hdl.handle.net/1957/51000.
MLA Handbook (7th Edition):
Chinn, Clarence Edward. “Techniques for evaluating certain physical properties of soil moisture.” 1956. Web. 16 Jan 2021.
Vancouver:
Chinn CE. Techniques for evaluating certain physical properties of soil moisture. [Internet] [Doctoral dissertation]. Oregon State University; 1956. [cited 2021 Jan 16].
Available from: http://hdl.handle.net/1957/51000.
Council of Science Editors:
Chinn CE. Techniques for evaluating certain physical properties of soil moisture. [Doctoral Dissertation]. Oregon State University; 1956. Available from: http://hdl.handle.net/1957/51000

Oregon State University
14.
Abd El-Samie, Ahmed Gamal.
Determination of irrigation frequencies and amounts by soil moisture sampling and gypsum electrical resistance blocks.
Degree: PhD, Soils, 1953, Oregon State University
URL: http://hdl.handle.net/1957/51365
Subjects/Keywords: Soil moisture
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share





❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Abd El-Samie, A. G. (1953). Determination of irrigation frequencies and amounts by soil moisture sampling and gypsum electrical resistance blocks. (Doctoral Dissertation). Oregon State University. Retrieved from http://hdl.handle.net/1957/51365
Chicago Manual of Style (16th Edition):
Abd El-Samie, Ahmed Gamal. “Determination of irrigation frequencies and amounts by soil moisture sampling and gypsum electrical resistance blocks.” 1953. Doctoral Dissertation, Oregon State University. Accessed January 16, 2021.
http://hdl.handle.net/1957/51365.
MLA Handbook (7th Edition):
Abd El-Samie, Ahmed Gamal. “Determination of irrigation frequencies and amounts by soil moisture sampling and gypsum electrical resistance blocks.” 1953. Web. 16 Jan 2021.
Vancouver:
Abd El-Samie AG. Determination of irrigation frequencies and amounts by soil moisture sampling and gypsum electrical resistance blocks. [Internet] [Doctoral dissertation]. Oregon State University; 1953. [cited 2021 Jan 16].
Available from: http://hdl.handle.net/1957/51365.
Council of Science Editors:
Abd El-Samie AG. Determination of irrigation frequencies and amounts by soil moisture sampling and gypsum electrical resistance blocks. [Doctoral Dissertation]. Oregon State University; 1953. Available from: http://hdl.handle.net/1957/51365

Oregon State University
15.
Peebler, Francis Eugene.
The effect of organic matter on "available soil water ".
Degree: MS, Soils, 1941, Oregon State University
URL: http://hdl.handle.net/1957/53655
Subjects/Keywords: Soil moisture
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share





❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Peebler, F. E. (1941). The effect of organic matter on "available soil water ". (Masters Thesis). Oregon State University. Retrieved from http://hdl.handle.net/1957/53655
Chicago Manual of Style (16th Edition):
Peebler, Francis Eugene. “The effect of organic matter on "available soil water ".” 1941. Masters Thesis, Oregon State University. Accessed January 16, 2021.
http://hdl.handle.net/1957/53655.
MLA Handbook (7th Edition):
Peebler, Francis Eugene. “The effect of organic matter on "available soil water ".” 1941. Web. 16 Jan 2021.
Vancouver:
Peebler FE. The effect of organic matter on "available soil water ". [Internet] [Masters thesis]. Oregon State University; 1941. [cited 2021 Jan 16].
Available from: http://hdl.handle.net/1957/53655.
Council of Science Editors:
Peebler FE. The effect of organic matter on "available soil water ". [Masters Thesis]. Oregon State University; 1941. Available from: http://hdl.handle.net/1957/53655

Oregon State University
16.
Mirzaei, Babak.
Durability Assessment of Wood Composites Using Fracture Mechanics.
Degree: PhD, Wood Science, 2016, Oregon State University
URL: http://hdl.handle.net/1957/58419
► The advent of synthetic adhesives has transformed the structural applications of wood. However, a persistent issue in adhesively-bonded wood products has been moisture durability. When…
(more)
▼ The advent of synthetic adhesives has transformed the structural applications of wood. However, a persistent issue in adhesively-bonded wood products has been
moisture durability. When designing wood based composites,
moisture durability will depend on both the wood phase and the adhesive phase. A key question, therefore, is how does one rank adhesives for their ability to convey
moisture durability in wood composites? Typical wood-based composite tests for
moisture durability assessments do not consider the post-peak load regime of the material or are merely qualitative. This research explores the suitability of crack propagation fracture experiments to develop new methodologies for durability assessment of wood composites and adhesives.
Fracture resistance curves (R curves) were measured for solid wood Douglas-fir and laminated veneer lumber (LVL) made with Douglas-fir veneer and a variety wood adhesives, namely, polyvinyl acetate, phenol formaldehyde, emulsion polymer isocyanate and phenol resorcinol formaldehyde. The LVL and solid wood R curves were similar for initiation of fracture, but the LVL toughness rose much higher than solid wood. Because a rising R curve is caused by fiber bridging effects, these differences show that the LVL adhesive has a large effect on the fiber bridging process. This resin effect was exploited to develop a test method for characterizing the ability of a resin to provide wood composites that are durable to
moisture exposure. In characterizing toughness changes, it was important to focus on the magnitude and rate of the toughness increase attributed to fiber bridging. A new method was developed for ranking the role of adhesives in the durability of wood-based composites by observing changes in fracture toughness during crack propagation following cyclic exposure to
moisture conditions. This new approach was compared to conventional mechanical performance test methods, such as observing strength and stiffness loss after exposure. Comparing changes in fracture toughness as a function of crack length after
moisture cycling shows that fracture-mechanics based methods can distinguish different adhesive systems on the basis of their durability, while conventional test methods do not have similar capability. Using steady-state toughness alone, the most and least durable adhesives (phenol formaldehyde and polyvinyl acetate) could be distinguished, but the performance of two other adhesives (emulsion polymer isocyanate and phenol resorcinol formaldehyde) could not. Further analysis of experimental R curves based on kinetics of degradation was able to rank all adhesives confidently and therefore provided the preferred method. The likely cause for the inability of conventional tests to rank adhesives is that they are based on initiation of failure while the fracture tests show that comparisons that can rank adhesives require consideration of fracture properties after a significant amount of crack propagation has occurred.
Additionally, a new method was proposed for determining…
Advisors/Committee Members: Sinha, Arijit (advisor), Kamke, Fred (committee member).
Subjects/Keywords: Wood composite; Engineered wood – Moisture
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share





❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Mirzaei, B. (2016). Durability Assessment of Wood Composites Using Fracture Mechanics. (Doctoral Dissertation). Oregon State University. Retrieved from http://hdl.handle.net/1957/58419
Chicago Manual of Style (16th Edition):
Mirzaei, Babak. “Durability Assessment of Wood Composites Using Fracture Mechanics.” 2016. Doctoral Dissertation, Oregon State University. Accessed January 16, 2021.
http://hdl.handle.net/1957/58419.
MLA Handbook (7th Edition):
Mirzaei, Babak. “Durability Assessment of Wood Composites Using Fracture Mechanics.” 2016. Web. 16 Jan 2021.
Vancouver:
Mirzaei B. Durability Assessment of Wood Composites Using Fracture Mechanics. [Internet] [Doctoral dissertation]. Oregon State University; 2016. [cited 2021 Jan 16].
Available from: http://hdl.handle.net/1957/58419.
Council of Science Editors:
Mirzaei B. Durability Assessment of Wood Composites Using Fracture Mechanics. [Doctoral Dissertation]. Oregon State University; 2016. Available from: http://hdl.handle.net/1957/58419

Texas A&M University
17.
Fiaz Ahmed Rafi Ahmed, .
Interactions between Tropical Convection and the Environment: A View across Scales.
Degree: PhD, Atmospheric Sciences, 2016, Texas A&M University
URL: http://hdl.handle.net/1969.1/174279
► The interaction between moist convection and the environment that engenders it is a problem that spans multiple scales. In this study, the problem is approached…
(more)
▼ The interaction between moist convection and the environment that engenders it is a problem that spans multiple scales. In this study, the problem is approached using a suite of observational and modeling tools. The first approach was the development of an algorithm to estimate latent heating profiles from radar observations using a high-resolution version of the Weather Research and Forecasting Model (WRF). A lookup table was constructed from WRF output to statistically quantify the relationship between latent heating and three characteristics of radar-observed storms: size, mean height and mean intensity. A tight link between organization (characterized by the size of the system) and the intensity (as measured by latent heat release) was found. The algorithm was validated against field campaign observations and shows skill in replicating the short-term (less than daily) variability associated with tropical synoptic systems. The second approach was to analyze the relationship between convection and the environment via
moisture modulation using the Tropical Rain Measuring Mission satellite and reanalysis data, with focus on the tropical precipitation-water vapor relationship (P-r curve) which is a power-law relationship, which at the convective time and space scales is characterized by a sharp increase in precipitation beyond a critical value of
moisture (the pickup threshold). The convective and stratiform components of the P-r relationship were studied separately and it was found that the pickup in tropical precipitation mainly originates from a rapid pickup in the areal extent of stratiform precipitation. A survey of the P-r curve across the tropical world–both land and ocean–shows that the pickup threshold is much lower over tropical land than over the ocean and that convective precipitation picks up prior to stratiform precipitation. Finally, the implications of a precipitation-
moisture relationship were explored for prominent forms of organized convection in the tropics, i.e, tropical waves and the Madden-Julian Oscillation. It was found that the different sources of column
moisture (horizontal transport and convection) were influential in environments with different
moisture levels. These relationships are also dependent on the time and space scale of analysis.
Advisors/Committee Members: Schumacher, Courtney (advisor), Saravanan, R. (committee member), Nielsen-Gammon, John (committee member), Raymond, Anne (committee member).
Subjects/Keywords: tropical convection; precipitation; moisture
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share





❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Fiaz Ahmed Rafi Ahmed, .. (2016). Interactions between Tropical Convection and the Environment: A View across Scales. (Doctoral Dissertation). Texas A&M University. Retrieved from http://hdl.handle.net/1969.1/174279
Note: this citation may be lacking information needed for this citation format:
Author name may be incomplete
Chicago Manual of Style (16th Edition):
Fiaz Ahmed Rafi Ahmed, .. “Interactions between Tropical Convection and the Environment: A View across Scales.” 2016. Doctoral Dissertation, Texas A&M University. Accessed January 16, 2021.
http://hdl.handle.net/1969.1/174279.
Note: this citation may be lacking information needed for this citation format:
Author name may be incomplete
MLA Handbook (7th Edition):
Fiaz Ahmed Rafi Ahmed, .. “Interactions between Tropical Convection and the Environment: A View across Scales.” 2016. Web. 16 Jan 2021.
Note: this citation may be lacking information needed for this citation format:
Author name may be incomplete
Vancouver:
Fiaz Ahmed Rafi Ahmed, .. Interactions between Tropical Convection and the Environment: A View across Scales. [Internet] [Doctoral dissertation]. Texas A&M University; 2016. [cited 2021 Jan 16].
Available from: http://hdl.handle.net/1969.1/174279.
Note: this citation may be lacking information needed for this citation format:
Author name may be incomplete
Council of Science Editors:
Fiaz Ahmed Rafi Ahmed, .. Interactions between Tropical Convection and the Environment: A View across Scales. [Doctoral Dissertation]. Texas A&M University; 2016. Available from: http://hdl.handle.net/1969.1/174279
Note: this citation may be lacking information needed for this citation format:
Author name may be incomplete

Texas A&M University
18.
Das, Narendra Narayan.
Modeling and application of soil moisture at varying spatial scales with parameter scaling.
Degree: PhD, Biological and Agricultural Engineering, 2009, Texas A&M University
URL: http://hdl.handle.net/1969.1/ETD-TAMU-2877
► The dissertation focuses on characterization of subpixel variability within a satellite-based remotely sensed coarse-scale soil moisture footprint. The underlying heterogeneity of coarse-scale soil moisture footprint…
(more)
▼ The dissertation focuses on characterization of subpixel variability within a
satellite-based remotely sensed coarse-scale soil
moisture footprint. The underlying
heterogeneity of coarse-scale soil
moisture footprint is masked by the area-integrated
properties within the sensor footprint. Therefore, the soil
moisture values derived from
these measurements are an area average. The variability in soil
moisture within the
footprint is introduced by inherent spatial variability present in rainfall, and geophysical
parameters (vegetation, topography, and soil). The geophysical parameters/variables
typically interact in a complex fashion to make soil
moisture evolution and dependent
processes highly variable, and also, introduce nonlinearity across spatio-temporal scales.
To study the variability and scaling characteristics of soil
moisture, a quasi-distributed
Soil-Vegetation-Atmosphere-Transfer (SVAT) modeling framework is developed to
simulate the hydrological dynamics, i.e., the fluxes and the state variables within the
satellite-based soil
moisture footprint. The modeling framework is successfully tested
and implemented in different hydroclimatic regions during the research. New multiscale data assimilation and Markov Chain Monte Carlo (MCMC) techniques in conjunction
with the SVAT modeling framework are developed to quantify subpixel variability and
assess multiscale soil
moisture fields within the coarse-scale satellite footprint.
Reasonable results demonstrate the potential to use these techniques to validate
multiscale soil
moisture data from future satellite mission e.g., Soil
Moisture Active
Passive (SMAP) mission of NASA. The results also highlight the physical controls of
geophysical parameters on the soil
moisture fields for various hydroclimatic regions.
New algorithm that uses SVAT modeling framework is also proposed and its
application demonstrated, to derive the stochastic soil hydraulic properties (i.e., saturated
hydraulic conductivity) and surface features (i.e., surface roughness and volume
scattering) related to radar remote sensing of soil
moisture.
Advisors/Committee Members: Mohanty, Binayak P. (advisor), Hetland, Robert (committee member), Singh, Vijay P. (committee member), Yalchin, Efendiev (committee member).
Subjects/Keywords: soil moisture
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share





❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Das, N. N. (2009). Modeling and application of soil moisture at varying spatial scales with parameter scaling. (Doctoral Dissertation). Texas A&M University. Retrieved from http://hdl.handle.net/1969.1/ETD-TAMU-2877
Chicago Manual of Style (16th Edition):
Das, Narendra Narayan. “Modeling and application of soil moisture at varying spatial scales with parameter scaling.” 2009. Doctoral Dissertation, Texas A&M University. Accessed January 16, 2021.
http://hdl.handle.net/1969.1/ETD-TAMU-2877.
MLA Handbook (7th Edition):
Das, Narendra Narayan. “Modeling and application of soil moisture at varying spatial scales with parameter scaling.” 2009. Web. 16 Jan 2021.
Vancouver:
Das NN. Modeling and application of soil moisture at varying spatial scales with parameter scaling. [Internet] [Doctoral dissertation]. Texas A&M University; 2009. [cited 2021 Jan 16].
Available from: http://hdl.handle.net/1969.1/ETD-TAMU-2877.
Council of Science Editors:
Das NN. Modeling and application of soil moisture at varying spatial scales with parameter scaling. [Doctoral Dissertation]. Texas A&M University; 2009. Available from: http://hdl.handle.net/1969.1/ETD-TAMU-2877

Texas A&M University
19.
Rana, Samagra.
Designing a Modeling Framework for Estimating Soil Moisture in Heterogeneous Landscape.
Degree: MS, Biological and Agricultural Engineering, 2016, Texas A&M University
URL: http://hdl.handle.net/1969.1/157052
► Soil moisture is an important component in many hydrologic and land– atmosphere interactions. Proper characterization of soil moisture variability is vital for understanding hydrological, ecological…
(more)
▼ Soil
moisture is an important component in many hydrologic and land– atmosphere interactions. Proper characterization of soil
moisture variability is vital for understanding hydrological, ecological and biogeochemical processes. At the Darcy scale, root zone soil
moisture variability can effectively be estimated by employing an accurate process based model. In this study, we used different conceptual soil-water flow models (single porosity and dual porosity) to predict soil
moisture variability across the Little Washita watershed, Oklahoma. The soil hydraulic parameters (SHPs) for the models were estimated through inverse modeling of multi-step outflow experimental data from soil cores, collected during the Southern Great Plains (SGP) 1997 hydrology experiment, from various parts of the watershed. Single porosity, bimodal and dual porosity models were used to calculate SHPs. With the application of various soil water flow model, non-equilibrium effects and preferential flow were briefly discussed. The validity of different models is presented based on the landscape position (location) characteristics (soil, topography, vegetation, organic matter content) of the soil cores. Using calculated SHPs from various parts of the watershed, soil
moisture was predicted using forward modeling from March 1997 to November 1997. Different combinations of soil texture, topography, vegetation and organic content influenced the soil hydraulic properties and in soil
moisture prediction. For most of the soil samples, dual porosity model was able to capture the micro and macro heterogeneities better than Durner’s and single porosity model. But factors such as landscape position, organic matter and vegetation significantly contributed in predicting soil
moisture. Our soil
moisture predictions were validated with remotely sensed soil
moisture values. Based on our validation, a combination modeling scheme is suggested for soil water model selection for various parts of the watershed.
Advisors/Committee Members: Mohanty, Binayak (advisor), Cahill, Anthony (committee member), Smith, Patricia (committee member).
Subjects/Keywords: soil moisture; hydrology; vadose zone
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share





❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Rana, S. (2016). Designing a Modeling Framework for Estimating Soil Moisture in Heterogeneous Landscape. (Masters Thesis). Texas A&M University. Retrieved from http://hdl.handle.net/1969.1/157052
Chicago Manual of Style (16th Edition):
Rana, Samagra. “Designing a Modeling Framework for Estimating Soil Moisture in Heterogeneous Landscape.” 2016. Masters Thesis, Texas A&M University. Accessed January 16, 2021.
http://hdl.handle.net/1969.1/157052.
MLA Handbook (7th Edition):
Rana, Samagra. “Designing a Modeling Framework for Estimating Soil Moisture in Heterogeneous Landscape.” 2016. Web. 16 Jan 2021.
Vancouver:
Rana S. Designing a Modeling Framework for Estimating Soil Moisture in Heterogeneous Landscape. [Internet] [Masters thesis]. Texas A&M University; 2016. [cited 2021 Jan 16].
Available from: http://hdl.handle.net/1969.1/157052.
Council of Science Editors:
Rana S. Designing a Modeling Framework for Estimating Soil Moisture in Heterogeneous Landscape. [Masters Thesis]. Texas A&M University; 2016. Available from: http://hdl.handle.net/1969.1/157052

Texas A&M University
20.
Yuan, Shanshui.
Assessment of Multiple Approaches for Using Soil Moisture to Evaluate Drought in the U.S. Great Plains.
Degree: PhD, Geography, 2016, Texas A&M University
URL: http://hdl.handle.net/1969.1/159050
► Drought is a natural phenomenon induced by precipitation deficiency and it impacts economy, environment and society. The drought monitoring tools include direct measurements, such as…
(more)
▼ Drought is a natural phenomenon induced by precipitation deficiency and it impacts economy, environment and society. The drought monitoring tools include direct measurements, such as precipitation, soil
moisture and streamflow and indirect estimations, like drought indices and model simulations. The newly developed North American Soil
Moisture Database (NASMD) provides quality-controlled soil
moisture observations over the entire U.S. to help assess the reliability of these drought monitoring tools. In this dissertation study, we focused on the assessment of drought indices and model simulated soil
moisture using in situ data from NASMD.
First, we focused on four soil
moisture statistics: percentile, trend, variability and persistence in 0-10 cm and 0-100 cm soil layers. The result reveals that the crop
moisture index well represent the soil
moisture conditions in the top 100 cm soil layer based on higher correlation, more similar trend, variability and persistence. In the top 10 cm soil layer, no drought index is the most appropriate one for all the statistics. In general, drought indices considering potential evapotranspiration (PET) are more appropriate for representing soil
moisture in 0-10 cm soil layer. Then we developed a more realistic Palmer Drought Severity Index (PDSI) using two-source PET model. Based on the comparison with original PDSI and Penman-Monteith based PDSI, we found the choice of PET method would impact the spatial and temporal patterns of drought and the drought severity during extreme drought events. Thirdly, we tested the reduced optimal interpolation (ROI) method to soil
moisture in Oklahoma and compared it with two geo-statistical interpolation methods: the inversed distance weighting (IDW) method and Cokriging method. The ROI method is significantly more accurate than IDW and it also outperforms Cokriging. We demonstrate that ROI can recreate soil
moisture at unsampled locations. Last, we assessed the accuracy of soil
moisture in Earth system models (ESMs) by using in situ and satellite observations. The results show that models can reproduce the seasonal variability in soil
moisture over CONUS but with overestimation in the western U.S. and underestimation in the eastern U.S. There are significant regional and inter-model variations in performance.
Advisors/Committee Members: Quiring, Steven (advisor), Frauenfeld, Oliver (committee member), Guneralp, Inci (committee member), Singh, Vijay (committee member).
Subjects/Keywords: Soil moisture; drought; interpolation; CMIP5
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share





❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Yuan, S. (2016). Assessment of Multiple Approaches for Using Soil Moisture to Evaluate Drought in the U.S. Great Plains. (Doctoral Dissertation). Texas A&M University. Retrieved from http://hdl.handle.net/1969.1/159050
Chicago Manual of Style (16th Edition):
Yuan, Shanshui. “Assessment of Multiple Approaches for Using Soil Moisture to Evaluate Drought in the U.S. Great Plains.” 2016. Doctoral Dissertation, Texas A&M University. Accessed January 16, 2021.
http://hdl.handle.net/1969.1/159050.
MLA Handbook (7th Edition):
Yuan, Shanshui. “Assessment of Multiple Approaches for Using Soil Moisture to Evaluate Drought in the U.S. Great Plains.” 2016. Web. 16 Jan 2021.
Vancouver:
Yuan S. Assessment of Multiple Approaches for Using Soil Moisture to Evaluate Drought in the U.S. Great Plains. [Internet] [Doctoral dissertation]. Texas A&M University; 2016. [cited 2021 Jan 16].
Available from: http://hdl.handle.net/1969.1/159050.
Council of Science Editors:
Yuan S. Assessment of Multiple Approaches for Using Soil Moisture to Evaluate Drought in the U.S. Great Plains. [Doctoral Dissertation]. Texas A&M University; 2016. Available from: http://hdl.handle.net/1969.1/159050

Texas A&M University
21.
Caro Spinel, Silvia.
A Coupled Micromechanical Model of Moisture-Induced Damage in Asphalt Mixtures: Formulation and Applications.
Degree: PhD, Civil Engineering, 2011, Texas A&M University
URL: http://hdl.handle.net/1969.1/ETD-TAMU-2009-12-7336
► The deleterious effect of moisture on the structural integrity of asphalt mixtures has been recognized as one of the main causes of early deterioration of…
(more)
▼ The deleterious effect of
moisture on the structural integrity of asphalt mixtures has been recognized as one of the main causes of early deterioration of asphalt pavements. This phenomenon, usually referred to as
moisture damage, is defined as the progressive loss of structural integrity of the mixture that is primarily caused by the presence of
moisture in liquid or vapor state.
Moisture damage is associated with the development of different physical, mechanical, and chemical processes occurring within the microstructure of the mixture at different intensities and rates. Although there have been important advancements in identifying and characterizing this phenomenon, there is still a lack of understanding of the damage mechanisms occurring at the microscopic level. This situation has motivated the research work reported in this dissertation.
The main objective of this dissertation is to formulate and apply a numerical micromechanical model of
moisture-induced damage in asphalt mixtures. The model focuses on coupling the effects of
moisture diffusion—one of the three main modes of
moisture transport within asphalt mixtures—with the mechanical performance of the microstructure. Specifically, the model aims to account for the effect of
moisture diffusion on the degradation of the viscoelastic bulk matrix of the mixture (i.e., cohesive degradation) and on the gradual deterioration of the adhesive bonds between the aggregates and the asphalt matrix (i.e., adhesive degradation).
The micromechanical model was applied to study the role of some physical and mechanical properties of the constitutive phases of the mixtures on the susceptibility of the mixture to
moisture damage. The results from this analysis suggest that the diffusion coefficients of the asphalt matrix and aggregates, as well as the bond strength of the aggregate-matrix interface, have the most influence on the
moisture susceptibility of the mixtures.
The micromechanical model was further used to investigate the influence of the void phase of asphalt mixtures on the generation of
moisture-related deterioration processes. Two different probabilistic-based approaches were used to accomplish this objective. In the first approach, a volumetric distribution of air voids sizes measured using X-Ray Computed Tomography in a dense-graded asphalt mixture was used to generate probable void structures in a microstructure of an asphalt mixture. In the second approach, a stochastic modeling technique based on random field theory was used to generate probable air voids distributions of the mixture. In this second approach, the influence of the air voids was accounted for by making the physical and mechanical properties of the asphalt matrix dependent on probable voids distributions. Although both approaches take into consideration the characteristics of the air void phase on the mechanical response of the mixtures subjected to moist environments, the former explicitly introduces the air phase within the microstructure while the latter indirectly includes its effects…
Advisors/Committee Members: Masad, Eyad (advisor), Chen, Hamn-Ching (committee member), Little, Dallas (committee member), Lytton, Robert (committee member), Muliana, Anastasia (committee member), Scarpas, Athanasios (committee member).
Subjects/Keywords: Moisture damage; asphalt mixtures; micromechanics
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share





❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Caro Spinel, S. (2011). A Coupled Micromechanical Model of Moisture-Induced Damage in Asphalt Mixtures: Formulation and Applications. (Doctoral Dissertation). Texas A&M University. Retrieved from http://hdl.handle.net/1969.1/ETD-TAMU-2009-12-7336
Chicago Manual of Style (16th Edition):
Caro Spinel, Silvia. “A Coupled Micromechanical Model of Moisture-Induced Damage in Asphalt Mixtures: Formulation and Applications.” 2011. Doctoral Dissertation, Texas A&M University. Accessed January 16, 2021.
http://hdl.handle.net/1969.1/ETD-TAMU-2009-12-7336.
MLA Handbook (7th Edition):
Caro Spinel, Silvia. “A Coupled Micromechanical Model of Moisture-Induced Damage in Asphalt Mixtures: Formulation and Applications.” 2011. Web. 16 Jan 2021.
Vancouver:
Caro Spinel S. A Coupled Micromechanical Model of Moisture-Induced Damage in Asphalt Mixtures: Formulation and Applications. [Internet] [Doctoral dissertation]. Texas A&M University; 2011. [cited 2021 Jan 16].
Available from: http://hdl.handle.net/1969.1/ETD-TAMU-2009-12-7336.
Council of Science Editors:
Caro Spinel S. A Coupled Micromechanical Model of Moisture-Induced Damage in Asphalt Mixtures: Formulation and Applications. [Doctoral Dissertation]. Texas A&M University; 2011. Available from: http://hdl.handle.net/1969.1/ETD-TAMU-2009-12-7336

Addis Ababa University
22.
ABEBE, KEBEDE.
THE ROLE OF MOISTURE SCHEME IN REGIONAL CLIMATE MODELLING OF PRECIPITATION OVER THE HORN OF AFRICA
.
Degree: 2012, Addis Ababa University
URL: http://etd.aau.edu.et/dspace/handle/123456789/1307
► This study aims to improve the capability of the latest Regional Climate Model version 4 (RegCM4) to simulate the precipitation over the Horn of Africa.…
(more)
▼ This study aims to improve the capability of the latest Regional Climate Model version
4 (RegCM4) to simulate the precipitation over the Horn of Africa. Although there are
several aspects in which the model can be improved, the focus of this study is to tackle
the problem of its
moisture scheme. RegCM4
moisture scheme has fourteen
moisture
scheme parameters, which can be tuned within the allowed physical limits. Each of the
14
moisture parameters have been varied around the current default setting and over 80
model runs have been performed, for a domain de ned by 60km resolution, 18 vertical
levels covering nearly the whole Africa geographycally and major circulation patterns
that derive climate over the region. We have found physical sound set of parameters
to be used in the fourteen
moisture scheme parameters that have sigini cantly reduced
bias in RegCM4 pricipitation; improved correlation of RegCM4 precipitation with respect
GPCP and CMAP; and captured seasonal and interannual variations over most of the 12
delineated homogeneous regions of Horn of Africa.
Advisors/Committee Members: Dr. Gizaw Mengistu (advisor).
Subjects/Keywords: Regional Climate Model;
moisture scheme
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share





❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
ABEBE, K. (2012). THE ROLE OF MOISTURE SCHEME IN REGIONAL CLIMATE MODELLING OF PRECIPITATION OVER THE HORN OF AFRICA
. (Thesis). Addis Ababa University. Retrieved from http://etd.aau.edu.et/dspace/handle/123456789/1307
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Chicago Manual of Style (16th Edition):
ABEBE, KEBEDE. “THE ROLE OF MOISTURE SCHEME IN REGIONAL CLIMATE MODELLING OF PRECIPITATION OVER THE HORN OF AFRICA
.” 2012. Thesis, Addis Ababa University. Accessed January 16, 2021.
http://etd.aau.edu.et/dspace/handle/123456789/1307.
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
MLA Handbook (7th Edition):
ABEBE, KEBEDE. “THE ROLE OF MOISTURE SCHEME IN REGIONAL CLIMATE MODELLING OF PRECIPITATION OVER THE HORN OF AFRICA
.” 2012. Web. 16 Jan 2021.
Vancouver:
ABEBE K. THE ROLE OF MOISTURE SCHEME IN REGIONAL CLIMATE MODELLING OF PRECIPITATION OVER THE HORN OF AFRICA
. [Internet] [Thesis]. Addis Ababa University; 2012. [cited 2021 Jan 16].
Available from: http://etd.aau.edu.et/dspace/handle/123456789/1307.
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Council of Science Editors:
ABEBE K. THE ROLE OF MOISTURE SCHEME IN REGIONAL CLIMATE MODELLING OF PRECIPITATION OVER THE HORN OF AFRICA
. [Thesis]. Addis Ababa University; 2012. Available from: http://etd.aau.edu.et/dspace/handle/123456789/1307
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

University of Nairobi
23.
Kimani, Peter K.
Determination of Moisture and Temperature Variation in Wet Grains Over Time and Space to Effect Desiccant Drying
.
Degree: 2016, University of Nairobi
URL: http://hdl.handle.net/11295/97642
► The aim of this study was to establish the best position to place super absorbent polymer (SAP)in an experimental granary for effective and economical drying.…
(more)
▼ The aim of this study was to establish the best position to place super absorbent polymer
(SAP)in an experimental granary for effective and economical drying. To achieve the aim of
the study moisture migration and temperature distribution in stored wet grain was determined
over time. Also determined was the best position for placing SAP in the silo for use in a direct
solar drying grain silo. Results from experiments conducted were used to evaluate performance
of the SAP in grain drying. The study was carried out in the University of Nairobi, Department
of Environmental and Biosystems Engineering, Upper Kabete Campus.
An experimental silo was designed. From the design, three experimental silos were fabricated.
The initial experiment was conducted to determine moisture migration within the silos without
use of Super Absorbent Polymer (SAP). In a second experiment drying was conducted using
sun and super absorbent polymer placed inside the silo. The silo was evaluated in fifteen
different sections. The sections were: East (top, central and bottom), West (top, central and
bottom), North (top, central and bottom) South (top, central and bottom) and Center (top,
central and bottom). Thermometers were placed in each section and readings taken in the
morning, midday and evening. Modeling was done using regression analysis (MS Excel 2010)
based on the minimization of sum of squares by adjusting the model constants. The
coefficient of determination (R2), were used to evaluate the goodness of fit of the
mathematical model to the actual data. The model considered for this study was: second
degree polynomial regression model.
The results exhibited that drying occurred faster at the top compared to the center and bottom
sections. This was due to the fact that the top section was open hence moisture easily escaped
to the atmosphere aided by the high vapor pressure gradient between the grains at the top
surface of the silo and the atmospheric air. Second degree polynomial regression model
produced the highest values of R2 for experiment with SAP and the that without.
~ vi ~
Generally, it was established from the research that there is a significant difference in the
moisture content with depth in the three layers investigated during the entire drying period.
There was a high moisture depletion in the top layer while there was a high moisture
concentration at the center and bottom section with the central section having the highest. This
was a clear indication that the SAP ought to be placed in the center section and partly bottom
section as these were the areas with high moisture concentration. From the two sets of
experiments conducted it was revealed that the silo with SAP had a steeper and smoother
negative gradient as compared to that without; whose curves showed a series of negative and
positive gradients. This indicated that SAP was able to take up extra moisture that emigrated
into the center and bottom section and those that were brought about by moisture diffusion.
The research work…
Subjects/Keywords: Moisture and Temperature Variation
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share





❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Kimani, P. K. (2016). Determination of Moisture and Temperature Variation in Wet Grains Over Time and Space to Effect Desiccant Drying
. (Thesis). University of Nairobi. Retrieved from http://hdl.handle.net/11295/97642
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Chicago Manual of Style (16th Edition):
Kimani, Peter K. “Determination of Moisture and Temperature Variation in Wet Grains Over Time and Space to Effect Desiccant Drying
.” 2016. Thesis, University of Nairobi. Accessed January 16, 2021.
http://hdl.handle.net/11295/97642.
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
MLA Handbook (7th Edition):
Kimani, Peter K. “Determination of Moisture and Temperature Variation in Wet Grains Over Time and Space to Effect Desiccant Drying
.” 2016. Web. 16 Jan 2021.
Vancouver:
Kimani PK. Determination of Moisture and Temperature Variation in Wet Grains Over Time and Space to Effect Desiccant Drying
. [Internet] [Thesis]. University of Nairobi; 2016. [cited 2021 Jan 16].
Available from: http://hdl.handle.net/11295/97642.
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Council of Science Editors:
Kimani PK. Determination of Moisture and Temperature Variation in Wet Grains Over Time and Space to Effect Desiccant Drying
. [Thesis]. University of Nairobi; 2016. Available from: http://hdl.handle.net/11295/97642
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Queensland University of Technology
24.
Dalel, Muhammad Iqbal Darma.
Non-invasive method for detecting changes in soil moisture using wireless sensor networks.
Degree: 2012, Queensland University of Technology
URL: https://eprints.qut.edu.au/51039/
► There are several popular soil moisture measurement methods today such as time domain reflectometry, electromagnetic (EM) wave, electrical and acoustic methods. Significant studies have been…
(more)
▼ There are several popular soil moisture measurement methods today such as time domain reflectometry, electromagnetic (EM) wave, electrical and acoustic methods. Significant studies have been dedicated in developing method of measurements using those concepts, especially to achieve the characteristics of noninvasiveness.
EM wave method provides an advantage because it is non-invasive to the soil and does not need to utilise probes to penetrate or bury in the soil. But some EM methods are also too complex, expensive, and not portable for the application of Wireless Sensor Networks; for example satellites or UAV (Unmanned Aerial Vehicle) based sensors.
This research proposes a method in detecting changes in soil moisture using soil-reflected electromagnetic (SREM) wave from Wireless Sensor Networks (WSNs). Studies have shown that different levels of soil moisture will affects soil’s dielectric properties, such as relative permittivity and conductivity, and in turns change its reflection coefficients. The SREM wave method uses a transmitter adjacent to a WSNs node with purpose exclusively to transmit wireless signals that will be reflected by the soil. The strength from the reflected signal that is determined by the soil’s reflection coefficients is used to differentiate the level of soil moisture.
The novel nature of this method comes from using WSNs communication signals to perform soil moisture estimation without the need of external sensors or invasive equipment. This innovative method is non-invasive, low cost and simple to set up.
There are three locations at Brisbane, Australia chosen as the experiment’s location. The soil type in these locations contains 10–20% clay according to the Australian Soil Resource Information System. Six approximate levels of soil moisture (8, 10, 13, 15, 18 and 20%) are measured at each location; with each measurement consisting of 200 data. In total 3600 measurements are completed in this research, which is sufficient to achieve the research objective, assessing and proving the concept of SREM wave method. These results are compared with reference data from similar soil type to prove the concept. A fourth degree polynomial analysis is used to generate an equation to estimate soil moisture from received signal strength as recorded by using the SREM wave method.
Subjects/Keywords: soil moisture; wireless sensor networks
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share





❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Dalel, M. I. D. (2012). Non-invasive method for detecting changes in soil moisture using wireless sensor networks. (Thesis). Queensland University of Technology. Retrieved from https://eprints.qut.edu.au/51039/
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Chicago Manual of Style (16th Edition):
Dalel, Muhammad Iqbal Darma. “Non-invasive method for detecting changes in soil moisture using wireless sensor networks.” 2012. Thesis, Queensland University of Technology. Accessed January 16, 2021.
https://eprints.qut.edu.au/51039/.
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
MLA Handbook (7th Edition):
Dalel, Muhammad Iqbal Darma. “Non-invasive method for detecting changes in soil moisture using wireless sensor networks.” 2012. Web. 16 Jan 2021.
Vancouver:
Dalel MID. Non-invasive method for detecting changes in soil moisture using wireless sensor networks. [Internet] [Thesis]. Queensland University of Technology; 2012. [cited 2021 Jan 16].
Available from: https://eprints.qut.edu.au/51039/.
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Council of Science Editors:
Dalel MID. Non-invasive method for detecting changes in soil moisture using wireless sensor networks. [Thesis]. Queensland University of Technology; 2012. Available from: https://eprints.qut.edu.au/51039/
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Oregon State University
25.
Ross, Claude Gray.
Influence of soil moisture on the movement of bromacil in soil: Bromacil in soil.
Degree: MS, Farm Crops, 1966, Oregon State University
URL: http://hdl.handle.net/1957/47279
► In previous research, bromacil gave good performance when it was applied in early fall with fairly dry soil conditions and before the fall germinating weeds…
(more)
▼ In previous research, bromacil gave good performance when
it was applied in early fall with fairly dry soil conditions and before
the fall germinating weeds had started growth. On the other hand,
if bromacil was applied in late November, December, or January
on nearly saturated soil with weeds that had grown for one or two
months, weed control was quite noticeably reduced. Field and
greenhouse studies were conducted at Corvallis, Oregon, to determine the influence of soil
moisture and time of herbicide application on bromacil movement and performance.
In one field trial, two or six acre-inches of water were applied
by sprinkler irrigation at intervals following herbicide treatment. Intervals used were one day, two, four, or eight weeks following herbicide application on dry soil. Field bioassay with rape, wheat, oats,
annual bluegrass, sugar beets, and winter field peas indicated that
the performance of bromacil applied to dry soil was not affected by differences in irrigation levels or by the time interval between
application and irrigation. Bioassay of core segments taken from
the top six inches of soil showed no difference due to treatment
and indicated that bromacil was not leached below three inches
regardless of irrigation treatment. Of the bromacil found in the
top three inches, approximately half of it was in the 0-1 inch segment.
Difficulty in duplicating fall conditions appeared to have a
definite effect on results of field studies. Extensive loss of soil
moisture due to evaporation was probably the main factor causing
deviation from the desired conditions.
Another field trial included 0-, 1.5-, 3-, and 6-inch sprinkler
irrigation rates on an annual bluegrass stand which had been treated
with either pre- or post-emergence applications of bromacil. Irrigations were applied immediately after the post-emergence treatment. Both pre- and post-emergence applications of bromacil gave
good control of annual bluegrass regardless of subsequent post-emergence
irrigation. However, total precipitation during the first
month was only 0.25 inches and where there was no irrigation,
bromacil did not give adequate control.
Greenhouse leaching studies with soil columns did not give
satisfactory results. Consistent patterns of leaching throughout
replications could not be accomplished. When bromacil movement was determined by the use of soil columns and subirrigation with 1.5
inches of water, there was no difference in movement whether it was
applied to water-saturated or dry soil. A preliminary experiment
with a shorter subirrigation period, however, resulted in less
movement of the bromacil applied to dry soil.
Bromacil movement in soil by subirrigation is not the same
as leaching downward. Water moving through soil from subirrigation occurs through all except the very large pores; whereas in
downward leaching, water primarily moves by gravity through the
large pores once the small pores are filled.
Advisors/Committee Members: Appleby, Arnold P. (advisor), Chilcote, William W. (committee member).
Subjects/Keywords: Soil moisture
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share





❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Ross, C. G. (1966). Influence of soil moisture on the movement of bromacil in soil: Bromacil in soil. (Masters Thesis). Oregon State University. Retrieved from http://hdl.handle.net/1957/47279
Chicago Manual of Style (16th Edition):
Ross, Claude Gray. “Influence of soil moisture on the movement of bromacil in soil: Bromacil in soil.” 1966. Masters Thesis, Oregon State University. Accessed January 16, 2021.
http://hdl.handle.net/1957/47279.
MLA Handbook (7th Edition):
Ross, Claude Gray. “Influence of soil moisture on the movement of bromacil in soil: Bromacil in soil.” 1966. Web. 16 Jan 2021.
Vancouver:
Ross CG. Influence of soil moisture on the movement of bromacil in soil: Bromacil in soil. [Internet] [Masters thesis]. Oregon State University; 1966. [cited 2021 Jan 16].
Available from: http://hdl.handle.net/1957/47279.
Council of Science Editors:
Ross CG. Influence of soil moisture on the movement of bromacil in soil: Bromacil in soil. [Masters Thesis]. Oregon State University; 1966. Available from: http://hdl.handle.net/1957/47279

Oregon State University
26.
Stammers, William Norman.
The steady state flow of water through unsaturated soil in the low capillary potential region.
Degree: PhD, Soils, 1965, Oregon State University
URL: http://hdl.handle.net/1957/48630
► Several investigators have recently called attention to the fact that the flux equation for water movement in unsaturated soils may not be an appropriate mathematical…
(more)
▼ Several investigators have recently called attention to the
fact that the flux equation for water movement in unsaturated soils
may not be an appropriate mathematical model for the development
of the theory of unsaturated flow phenomena.
An analytical theory is developed for the purpose of testing
the validity of the flux equation. The theory does not require the
use of the unstable process of differentiating experimentally obtained
data which can be
subject to considerable error.
Measurements of steady state water content profiles in a
coarse textured soil in the low capillary potential region were made
by using the gamma ray attenuation method. These data, subjected
to the developed analysis, indicate that the water content gradient
form of the flux equation is a valid model for the movement of water
in unsaturated soils of coarse texture in the region of water contents
employed.
Two steady state methods of determining capillary conductivity
and soil water diffusivity have been developed and evaluated
on a coarse textured soil at water contents near saturation. Both
methods have the distinct advantage that the flow parameters can be
evaluated at distinct values of soil water content in contrast to the
"average" values obtained by existing steady state techniques.
Advisors/Committee Members: Boersma, Larry (advisor).
Subjects/Keywords: Soil moisture
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share





❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Stammers, W. N. (1965). The steady state flow of water through unsaturated soil in the low capillary potential region. (Doctoral Dissertation). Oregon State University. Retrieved from http://hdl.handle.net/1957/48630
Chicago Manual of Style (16th Edition):
Stammers, William Norman. “The steady state flow of water through unsaturated soil in the low capillary potential region.” 1965. Doctoral Dissertation, Oregon State University. Accessed January 16, 2021.
http://hdl.handle.net/1957/48630.
MLA Handbook (7th Edition):
Stammers, William Norman. “The steady state flow of water through unsaturated soil in the low capillary potential region.” 1965. Web. 16 Jan 2021.
Vancouver:
Stammers WN. The steady state flow of water through unsaturated soil in the low capillary potential region. [Internet] [Doctoral dissertation]. Oregon State University; 1965. [cited 2021 Jan 16].
Available from: http://hdl.handle.net/1957/48630.
Council of Science Editors:
Stammers WN. The steady state flow of water through unsaturated soil in the low capillary potential region. [Doctoral Dissertation]. Oregon State University; 1965. Available from: http://hdl.handle.net/1957/48630

Oregon State University
27.
Trent, Donald S.
The control of moisture condensed from saturated air flowing through cooled porous media.
Degree: MS, Mechanical and Industrial Engineering, 1964, Oregon State University
URL: http://hdl.handle.net/1957/48726
Subjects/Keywords: Soil moisture
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share





❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Trent, D. S. (1964). The control of moisture condensed from saturated air flowing through cooled porous media. (Masters Thesis). Oregon State University. Retrieved from http://hdl.handle.net/1957/48726
Chicago Manual of Style (16th Edition):
Trent, Donald S. “The control of moisture condensed from saturated air flowing through cooled porous media.” 1964. Masters Thesis, Oregon State University. Accessed January 16, 2021.
http://hdl.handle.net/1957/48726.
MLA Handbook (7th Edition):
Trent, Donald S. “The control of moisture condensed from saturated air flowing through cooled porous media.” 1964. Web. 16 Jan 2021.
Vancouver:
Trent DS. The control of moisture condensed from saturated air flowing through cooled porous media. [Internet] [Masters thesis]. Oregon State University; 1964. [cited 2021 Jan 16].
Available from: http://hdl.handle.net/1957/48726.
Council of Science Editors:
Trent DS. The control of moisture condensed from saturated air flowing through cooled porous media. [Masters Thesis]. Oregon State University; 1964. Available from: http://hdl.handle.net/1957/48726

Oregon State University
28.
Shen, Chung-Yi.
The distribution of moisture condensed from saturated air flowing through cooled porous media.
Degree: MS, Mechanical Engineering, 1963, Oregon State University
URL: http://hdl.handle.net/1957/50398
Subjects/Keywords: Soil moisture
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share





❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Shen, C. (1963). The distribution of moisture condensed from saturated air flowing through cooled porous media. (Masters Thesis). Oregon State University. Retrieved from http://hdl.handle.net/1957/50398
Chicago Manual of Style (16th Edition):
Shen, Chung-Yi. “The distribution of moisture condensed from saturated air flowing through cooled porous media.” 1963. Masters Thesis, Oregon State University. Accessed January 16, 2021.
http://hdl.handle.net/1957/50398.
MLA Handbook (7th Edition):
Shen, Chung-Yi. “The distribution of moisture condensed from saturated air flowing through cooled porous media.” 1963. Web. 16 Jan 2021.
Vancouver:
Shen C. The distribution of moisture condensed from saturated air flowing through cooled porous media. [Internet] [Masters thesis]. Oregon State University; 1963. [cited 2021 Jan 16].
Available from: http://hdl.handle.net/1957/50398.
Council of Science Editors:
Shen C. The distribution of moisture condensed from saturated air flowing through cooled porous media. [Masters Thesis]. Oregon State University; 1963. Available from: http://hdl.handle.net/1957/50398

Oregon State University
29.
Ashcroft, Gaylen L.
Gaussian elimination technique for solving the diffusion equation for moisture movement in unsaturated soil.
Degree: PhD, Soils, 1962, Oregon State University
URL: http://hdl.handle.net/1957/48972
Subjects/Keywords: Soil moisture
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share





❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Ashcroft, G. L. (1962). Gaussian elimination technique for solving the diffusion equation for moisture movement in unsaturated soil. (Doctoral Dissertation). Oregon State University. Retrieved from http://hdl.handle.net/1957/48972
Chicago Manual of Style (16th Edition):
Ashcroft, Gaylen L. “Gaussian elimination technique for solving the diffusion equation for moisture movement in unsaturated soil.” 1962. Doctoral Dissertation, Oregon State University. Accessed January 16, 2021.
http://hdl.handle.net/1957/48972.
MLA Handbook (7th Edition):
Ashcroft, Gaylen L. “Gaussian elimination technique for solving the diffusion equation for moisture movement in unsaturated soil.” 1962. Web. 16 Jan 2021.
Vancouver:
Ashcroft GL. Gaussian elimination technique for solving the diffusion equation for moisture movement in unsaturated soil. [Internet] [Doctoral dissertation]. Oregon State University; 1962. [cited 2021 Jan 16].
Available from: http://hdl.handle.net/1957/48972.
Council of Science Editors:
Ashcroft GL. Gaussian elimination technique for solving the diffusion equation for moisture movement in unsaturated soil. [Doctoral Dissertation]. Oregon State University; 1962. Available from: http://hdl.handle.net/1957/48972

Oregon State University
30.
Stevenson, David Stuart.
Effects of soil moisture-tension on rubidium uptake by sunflowers.
Degree: PhD, Soils, 1963, Oregon State University
URL: http://hdl.handle.net/1957/49979
► There is considerable evidence that the growth and elongation of plant roots increases linearly or almost linearly with increasing water contents or decreasing moisture-tension of…
(more)
▼ There is considerable evidence that the growth and elongation of
plant roots increases linearly or almost linearly with increasing water
contents or decreasing
moisture-tension of soil. If this is true it is
difficult to distinguish the effects of different water contents on absorption
phenomena such as water or ion uptake from the effects of the water
contents on the root growth itself. Any absorption process which
directly correlates with the amount of root growth is
subject to misinterpretation
as to the ultimate effect of changing water contents on the
particular process. One useful alternative is to measure the root
growth precisely and account for, through covariance, the differences
in root growth as a result of differences in water contents or
moisture-tensions
in the soil.
Samples of soil at various water contents and containing rubidium
ions, were placed around the stems of six-week old sunflower plants
and adventitious roots allowed to grow into the soil samples. The period
of adventitious root growth was six days. Root growth water lost
from the soil samples and the rubidium taken up into the above-ground
parts of the plants were measured. All experiments were conducted in a
controlled-environment growth room.
Root growth was found to be closely related to the initial water
contents of the soil samples. The relationship was slightly curvilinear.
Water taken up by the adventitious roots was found to be dependent upon
the amount of root growth and therefore closely related to the initial
water contents. In all cases where the adventitious root systems were
exposed to soil that was drier than that containing the main root systems
of the plants the amounts of water which moved into the plants
appeared to be small, much of the water remained in the adventitious
roots themselves. When the water content of the soil for the adventitious
roots was at a higher water content than that containing the main
root systems, considerably more water appeared to move into the plants
through the adventitious root systems.
Rubidium uptake was not consistently affected by the different
water contents, nor was the uptake correlated with the amount of root
growth. There was, however, at least as much rubidium accumulated
in the plants in 28 hours, when the adventitious roots were wetter than
the main root systems, as was accumulated in the plants in six days
when the adventitious roots were drier than the main root systems. It
appears that the transport of water from the roots to the plants may be
an important factor in ion accumulation and it may be that the uptake of
ions will not correlate with water conditions at the root surface unless
and until rapid transport of water takes place.
Since water uptake appears to be closely related to the amount of
root growth, the effects of water contents on the absorption process itself
must be interpreted with caution or the root growth measured and accounted for. It is not known if the same holds true for ion uptake.
In these experiments the…
Advisors/Committee Members: Boersma, Larry (advisor).
Subjects/Keywords: Soil moisture
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share





❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Stevenson, D. S. (1963). Effects of soil moisture-tension on rubidium uptake by sunflowers. (Doctoral Dissertation). Oregon State University. Retrieved from http://hdl.handle.net/1957/49979
Chicago Manual of Style (16th Edition):
Stevenson, David Stuart. “Effects of soil moisture-tension on rubidium uptake by sunflowers.” 1963. Doctoral Dissertation, Oregon State University. Accessed January 16, 2021.
http://hdl.handle.net/1957/49979.
MLA Handbook (7th Edition):
Stevenson, David Stuart. “Effects of soil moisture-tension on rubidium uptake by sunflowers.” 1963. Web. 16 Jan 2021.
Vancouver:
Stevenson DS. Effects of soil moisture-tension on rubidium uptake by sunflowers. [Internet] [Doctoral dissertation]. Oregon State University; 1963. [cited 2021 Jan 16].
Available from: http://hdl.handle.net/1957/49979.
Council of Science Editors:
Stevenson DS. Effects of soil moisture-tension on rubidium uptake by sunflowers. [Doctoral Dissertation]. Oregon State University; 1963. Available from: http://hdl.handle.net/1957/49979
◁ [1] [2] [3] [4] [5] … [83] ▶
.