subject:(impedance measurement)

Indian Institute of Science

1. Naik, Dinesh. Development of Handheld Impedance Spectroscopy Instrument Suitable for Biological Tissue Characterization.

Degree: MSc Engg, Faculty of Engineering, 2017, Indian Institute of Science

URL: http://etd.iisc.ac.in/handle/2005/2813

► Impedance spectroscopy (IS) is a powerful and sophisticated tool to characterize intrinsic electrical properties of any materials and its interface, measuring the electric and transport… (more)

▼ Impedance spectroscopy (IS) is a powerful and sophisticated tool to characterize intrinsic electrical properties of any materials and its interface, measuring the electric and transport properties of the materials, investigating the mechanism of electrochemical reaction etc. The fundamental principle of IS is the measurement of the impedance (equivalent to resistance in DC analysis) of the system under investigation over a wide frequency range. The IS study provides quantitative information about the conductance, the dielectric coefficient, the static properties of the interfaces like contact resistance, and its dynamic change due to adsorption or charge transfer phenomenon. Commercial Impedance analyzers that are available today are bulky and cannot be carried or deployed at remote locations for monitoring so easily, also such systems are expensive. Though IS concept is not new, standard Impedance analyzers are interfaced to the computer and require detailed analysis of the data by experts. Advancement in data conversion and signal processing is opening up opportunities for handheld smart devices. Hence it is felt that there is a need to develop a versatile low cost, portable (handheld) impedance analyzer instrument which can be used to characterize non linear materials like semiconductors, biological objects, and electrochemical samples. The instrument should be capable accepting test parameters using a touch screen based keypad and display test results on a Graphical LCD for quick analysis. Hence a standalone handheld instrument is designed to work independently without any PC control. The designed instrument consists of Digital Direct Synthesis (DDS) signal generator, a constant current source, Analog to digital convertor, Microcontroller to control frequency sweep parameters and acquire data, TFT Graphics LCD for displaying various plots, touch screen user interface to input sweep parameters and data storage section for offline analysis of obtained data. The instrument is designed to work on a battery or a regulated power supply. The instrument has options to display Nyquist plot, capacitance versus frequency plot, real and imaginary value of impedance versus frequency plot etc. Experimental investigations are conducted using this instrument on few passive components like resistor, inductor, capacitor and combinations. The instrument is also used to monitor the performance of polyimide based capacitive humidity sensor and its characteristics like sensitivity, linearity, repeatability and hysteresis. The measurement accuracy of the impedance varies from 0.7% to 4.67% depending on the impedance range. Bio impedance measurements are carried out on biological samples like Banana and the measured values are compared with the standard LCR meter. The bio impedance measurements are repeatable and comparable with the standard LCR meter readings and it is found to be within ±1% accuracy at the calibrated frequency. The instrument is also validated using industry standard Gauge R & R procedure to understand the… Advisors/Committee Members: Nagaraju, J (advisor).

Subjects/Keywords: Bio Impedance Spectroscopy; Tissue Impedance; Impedance Spectroscopy; Handheld Impedance Analyzer; Bio Impedance Measurement (BIS); Instrumentation

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Naik, D. (2017). Development of Handheld Impedance Spectroscopy Instrument Suitable for Biological Tissue Characterization. (Masters Thesis). Indian Institute of Science. Retrieved from http://etd.iisc.ac.in/handle/2005/2813

Chicago Manual of Style (16^th Edition):

Naik, Dinesh. “Development of Handheld Impedance Spectroscopy Instrument Suitable for Biological Tissue Characterization.” 2017. Masters Thesis, Indian Institute of Science. Accessed April 15, 2021. http://etd.iisc.ac.in/handle/2005/2813.

MLA Handbook (7^th Edition):

Naik, Dinesh. “Development of Handheld Impedance Spectroscopy Instrument Suitable for Biological Tissue Characterization.” 2017. Web. 15 Apr 2021.

Vancouver:

Naik D. Development of Handheld Impedance Spectroscopy Instrument Suitable for Biological Tissue Characterization. [Internet] [Masters thesis]. Indian Institute of Science; 2017. [cited 2021 Apr 15]. Available from: http://etd.iisc.ac.in/handle/2005/2813.

Council of Science Editors:

Naik D. Development of Handheld Impedance Spectroscopy Instrument Suitable for Biological Tissue Characterization. [Masters Thesis]. Indian Institute of Science; 2017. Available from: http://etd.iisc.ac.in/handle/2005/2813

University of Alberta

2. AREFIFAR, SEYED ALI. Online measurement and monitoring of power system impedance and load model parameters.

Degree: PhD, Department of Electrical and Computer Engineering, 2010, University of Alberta

URL: https://era.library.ualberta.ca/files/b5644t04m

► In power system studies, some parameters cannot be measured directly by using the currently existing power meters. These power system parameters include the power system… (more)

▼ In power system studies, some parameters cannot be measured directly by using the currently existing power meters. These power system parameters include the power system Thevenin impedance, harmonic impedances, zero sequence impedance, and the load model parameters. The power system’s Thevenin impedance at a load bus is an important parameter for power system planning and operation. The effects of changing the system operation conditions on voltages at the load buses can be easily determined if the power system impedance parameters are known. Moreover, by knowing the Thevenin equivalent parameters, one can calculate the system’s voltage stability margin and maximum loadability. The knowledge of power system harmonic impedances is necessary for harmonic mitigation, determination of harmonic limit compliance, prediction of system resonance, and harmonic propagation studies. Moreover, real-time monitoring of the system’s harmonic impedances provides significant improvements to the design and operation of active filters. The system’s zero sequence impedance at the substation bus is also important information for power system studies. It is used to calculate the different ground fault levels at substations. Furthermore, the loads in power systems play a significant role in power system planning, control, and stability analysis. Having reliable and accurate models of the loads is essential for designing automatic control systems and optimizing their configuration. Obtaining such models has been a challenging problem for power system engineers for decades, especially in the current deregulated market environment. This thesis presents newly developed and verified algorithms for online measurement and monitoring of these power system parameters. The algorithm proposed for monitoring the system’s Thevenin, harmonic, and zero sequence impedance parameters, uses the natural variations of the loads connected to the substations. The proposed algorithm for monitoring of load model parameters uses the voltage and current waveforms captured during the operation of the Under Load Tap Change (ULTC) transformers installed in the distribution substations. The proposed algorithms are applied to several field measurements from different substations. The results show that the algorithms fulfill the requirements for the online measurement and monitoring of power system Thevenin, harmonic and zero sequence impedances as well as the load model parameters.

Subjects/Keywords: load modeling; impedance measurement

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

AREFIFAR, S. A. (2010). Online measurement and monitoring of power system impedance and load model parameters. (Doctoral Dissertation). University of Alberta. Retrieved from https://era.library.ualberta.ca/files/b5644t04m

Chicago Manual of Style (16^th Edition):

AREFIFAR, SEYED ALI. “Online measurement and monitoring of power system impedance and load model parameters.” 2010. Doctoral Dissertation, University of Alberta. Accessed April 15, 2021. https://era.library.ualberta.ca/files/b5644t04m.

MLA Handbook (7^th Edition):

AREFIFAR, SEYED ALI. “Online measurement and monitoring of power system impedance and load model parameters.” 2010. Web. 15 Apr 2021.

Vancouver:

AREFIFAR SA. Online measurement and monitoring of power system impedance and load model parameters. [Internet] [Doctoral dissertation]. University of Alberta; 2010. [cited 2021 Apr 15]. Available from: https://era.library.ualberta.ca/files/b5644t04m.

Council of Science Editors:

AREFIFAR SA. Online measurement and monitoring of power system impedance and load model parameters. [Doctoral Dissertation]. University of Alberta; 2010. Available from: https://era.library.ualberta.ca/files/b5644t04m

University of Tennessee – Knoxville

3. Yu, Yongchao. Cell Impedance Sensing System Based on Vertically Aligned Carbon Nanofibers.

Degree: MS, Electrical Engineering, 2015, University of Tennessee – Knoxville

URL: https://trace.tennessee.edu/utk_gradthes/3530

► Standard biological assays are time consuming, occur at the end of an experiment, use bulky and expensive equipment and require skilled expertise. Lab on… (more)

Subjects/Keywords: VACNF; biosensing; cell impedance measurement

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Yu, Y. (2015). Cell Impedance Sensing System Based on Vertically Aligned Carbon Nanofibers. (Thesis). University of Tennessee – Knoxville. Retrieved from https://trace.tennessee.edu/utk_gradthes/3530

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Yu, Yongchao. “Cell Impedance Sensing System Based on Vertically Aligned Carbon Nanofibers.” 2015. Thesis, University of Tennessee – Knoxville. Accessed April 15, 2021. https://trace.tennessee.edu/utk_gradthes/3530.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Yu, Yongchao. “Cell Impedance Sensing System Based on Vertically Aligned Carbon Nanofibers.” 2015. Web. 15 Apr 2021.

Vancouver:

Yu Y. Cell Impedance Sensing System Based on Vertically Aligned Carbon Nanofibers. [Internet] [Thesis]. University of Tennessee – Knoxville; 2015. [cited 2021 Apr 15]. Available from: https://trace.tennessee.edu/utk_gradthes/3530.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Yu Y. Cell Impedance Sensing System Based on Vertically Aligned Carbon Nanofibers. [Thesis]. University of Tennessee – Knoxville; 2015. Available from: https://trace.tennessee.edu/utk_gradthes/3530

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

University of Manchester

4. Robinson, Rebecca Louise. Experimental study of electrophysiology using the fEITER system.

Degree: 2011, University of Manchester

URL: http://www.manchester.ac.uk/escholar/uk-ac-man-scw:119710

► Within neurophysiology, there is need for improvements to functional brain imaging devices. Neural processing within the brain occurs on milli-second through to second timescales. Currently… (more)

Subjects/Keywords: Electrical Impedance Tomography; Physiological Measurement; Evoked Potentials

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Robinson, R. L. (2011). Experimental study of electrophysiology using the fEITER system. (Doctoral Dissertation). University of Manchester. Retrieved from http://www.manchester.ac.uk/escholar/uk-ac-man-scw:119710

Chicago Manual of Style (16^th Edition):

Robinson, Rebecca Louise. “Experimental study of electrophysiology using the fEITER system.” 2011. Doctoral Dissertation, University of Manchester. Accessed April 15, 2021. http://www.manchester.ac.uk/escholar/uk-ac-man-scw:119710.

MLA Handbook (7^th Edition):

Robinson, Rebecca Louise. “Experimental study of electrophysiology using the fEITER system.” 2011. Web. 15 Apr 2021.

Vancouver:

Robinson RL. Experimental study of electrophysiology using the fEITER system. [Internet] [Doctoral dissertation]. University of Manchester; 2011. [cited 2021 Apr 15]. Available from: http://www.manchester.ac.uk/escholar/uk-ac-man-scw:119710.

Council of Science Editors:

Robinson RL. Experimental study of electrophysiology using the fEITER system. [Doctoral Dissertation]. University of Manchester; 2011. Available from: http://www.manchester.ac.uk/escholar/uk-ac-man-scw:119710

5. Hassanpour Razavi, Seyyed Ali. Improvement of the correlation between ALSE and BCI by adjusting the feeding and positioning conditions based on indirect measurement of termination impedances using current transformers.

Degree: 2018, Technische Universität Dortmund

URL: http://dx.doi.org/10.17877/DE290R-18898

► The most commonly used automotive immunity test methods for electrical interferences from narrowband radiated electromagnetic energy are described in ISO 11452 series. Bulk Current Injection… (more)

▼ The most commonly used automotive immunity test methods for electrical interferences from narrowband radiated electromagnetic energy are described in ISO 11452 series. Bulk Current Injection (BCI) and Absorber Line Shielded Enclosure (ALSE) apply different coupling mechanisms to assess the immunity of electronic components. While ALSE subjects the entire test setup to the electromagnetic fields generated by an antenna, BCI induces the interference signals directly into a certain part of the wiring harness by a current injection probe. ALSE is often considered as the more reliable method. However, testing with BCI is preferred as it allows performing the immunity tests in less time with less effort and cost. Despite using similar test setups, different interference currents are injected into the terminal units at each test method and therefore, the correlation between the test results is often poor. In order to improve the correlation, the BCI method must be modified to inject the same interference current as the ALSE method. This thesis proposes an approach that searches for these modifications and makes it possible to inject the same interference currents with a BCI probe. The two main issues of concern are the calculation of the injected interference currents during real test scenarios in a simulation environment and, the measurement of the input impedance of terminal units under the operation condition using optimized current transformers. The developed models and measurement methods are combined to reproduce the ALSE currents with a single BCI probe. In line with the implementation scheme: firstly, a measurement-based approach to model the ALSE and BCI couplings to a wire-over-ground structure is developed. These models are used to determine the interference currents at the terminal units; secondly, theoretical and measurement based methods are developed to characterize current transformers. The goal is to assess the ability of a current transformer to measure the input impedance of the terminal units without disconnecting the wiring harness; thirdly, four non-invasive methods to measure the input impedance of terminal units using optimized current transformers are proposed and experimentally validated; finally, an approach to reproduce the ALSE termination currents with a single BCI probe according to an optimization process is developed and validated. Capabilities and limitations of the proposed methods and approaches are analyzed, discussed, and ultimately applied to a real immunity test setup. Advisors/Committee Members: Frei, Stephan (advisor), Schulz, Dirk (referee).

Subjects/Keywords: ALSE; BCI; Immunity testing; Impedance measurement; 620

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Hassanpour Razavi, S. A. (2018). Improvement of the correlation between ALSE and BCI by adjusting the feeding and positioning conditions based on indirect measurement of termination impedances using current transformers. (Doctoral Dissertation). Technische Universität Dortmund. Retrieved from http://dx.doi.org/10.17877/DE290R-18898

Chicago Manual of Style (16^th Edition):

Hassanpour Razavi, Seyyed Ali. “Improvement of the correlation between ALSE and BCI by adjusting the feeding and positioning conditions based on indirect measurement of termination impedances using current transformers.” 2018. Doctoral Dissertation, Technische Universität Dortmund. Accessed April 15, 2021. http://dx.doi.org/10.17877/DE290R-18898.

MLA Handbook (7^th Edition):

Hassanpour Razavi, Seyyed Ali. “Improvement of the correlation between ALSE and BCI by adjusting the feeding and positioning conditions based on indirect measurement of termination impedances using current transformers.” 2018. Web. 15 Apr 2021.

Vancouver:

Hassanpour Razavi SA. Improvement of the correlation between ALSE and BCI by adjusting the feeding and positioning conditions based on indirect measurement of termination impedances using current transformers. [Internet] [Doctoral dissertation]. Technische Universität Dortmund; 2018. [cited 2021 Apr 15]. Available from: http://dx.doi.org/10.17877/DE290R-18898.

Council of Science Editors:

Hassanpour Razavi SA. Improvement of the correlation between ALSE and BCI by adjusting the feeding and positioning conditions based on indirect measurement of termination impedances using current transformers. [Doctoral Dissertation]. Technische Universität Dortmund; 2018. Available from: http://dx.doi.org/10.17877/DE290R-18898

Hong Kong University of Science and Technology

6. Tang, Shengwen. Microstructure study of cementitious materials using non-contact impedance measurement.

Degree: 2013, Hong Kong University of Science and Technology

URL: http://repository.ust.hk/ir/Record/1783.1-61577 ; https://doi.org/10.14711/thesis-b1251900 ; http://repository.ust.hk/ir/bitstream/1783.1-61577/1/th_redirect.html

► This thesis discusses four issues: 1) the development of new generation of non-contact impedance measurement with frequency sweeping. 2) the hydration process monitoring of cement… (more)

Subjects/Keywords: Cement composites ; Microstructure ; Mechanical impedance ; Measurement ; Hydration

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Tang, S. (2013). Microstructure study of cementitious materials using non-contact impedance measurement. (Thesis). Hong Kong University of Science and Technology. Retrieved from http://repository.ust.hk/ir/Record/1783.1-61577 ; https://doi.org/10.14711/thesis-b1251900 ; http://repository.ust.hk/ir/bitstream/1783.1-61577/1/th_redirect.html

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Tang, Shengwen. “Microstructure study of cementitious materials using non-contact impedance measurement.” 2013. Thesis, Hong Kong University of Science and Technology. Accessed April 15, 2021. http://repository.ust.hk/ir/Record/1783.1-61577 ; https://doi.org/10.14711/thesis-b1251900 ; http://repository.ust.hk/ir/bitstream/1783.1-61577/1/th_redirect.html.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Tang, Shengwen. “Microstructure study of cementitious materials using non-contact impedance measurement.” 2013. Web. 15 Apr 2021.

Vancouver:

Tang S. Microstructure study of cementitious materials using non-contact impedance measurement. [Internet] [Thesis]. Hong Kong University of Science and Technology; 2013. [cited 2021 Apr 15]. Available from: http://repository.ust.hk/ir/Record/1783.1-61577 ; https://doi.org/10.14711/thesis-b1251900 ; http://repository.ust.hk/ir/bitstream/1783.1-61577/1/th_redirect.html.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Tang S. Microstructure study of cementitious materials using non-contact impedance measurement. [Thesis]. Hong Kong University of Science and Technology; 2013. Available from: http://repository.ust.hk/ir/Record/1783.1-61577 ; https://doi.org/10.14711/thesis-b1251900 ; http://repository.ust.hk/ir/bitstream/1783.1-61577/1/th_redirect.html

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Michigan State University

7. Slocum, Robert Richard. The impedance method and its application to the determination of the acoustic impedance of liquid media.

Degree: MS, 1956, Michigan State University

URL: http://etd.lib.msu.edu/islandora/object/etd:8426

Subjects/Keywords: Acoustic impedance – Measurement

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Slocum, R. R. (1956). The impedance method and its application to the determination of the acoustic impedance of liquid media. (Masters Thesis). Michigan State University. Retrieved from http://etd.lib.msu.edu/islandora/object/etd:8426

Chicago Manual of Style (16^th Edition):

Slocum, Robert Richard. “The impedance method and its application to the determination of the acoustic impedance of liquid media.” 1956. Masters Thesis, Michigan State University. Accessed April 15, 2021. http://etd.lib.msu.edu/islandora/object/etd:8426.

MLA Handbook (7^th Edition):

Slocum, Robert Richard. “The impedance method and its application to the determination of the acoustic impedance of liquid media.” 1956. Web. 15 Apr 2021.

Vancouver:

Slocum RR. The impedance method and its application to the determination of the acoustic impedance of liquid media. [Internet] [Masters thesis]. Michigan State University; 1956. [cited 2021 Apr 15]. Available from: http://etd.lib.msu.edu/islandora/object/etd:8426.

Council of Science Editors:

Slocum RR. The impedance method and its application to the determination of the acoustic impedance of liquid media. [Masters Thesis]. Michigan State University; 1956. Available from: http://etd.lib.msu.edu/islandora/object/etd:8426

Delft University of Technology

8. Jiang, Bo (author). Microstructure for thermal impedance spectroscopy for biofuel composition measurement.

Degree: 2017, Delft University of Technology

URL: http://resolver.tudelft.nl/uuid:aab4dd14-da61-44bd-be55-64ec9f567d3b

►

Biofuel sensors for measuring the ethanol and gasoline concentrations in bio-ethanol blends, have been studied world-wide and currently used in engine management in Flex-Fuel cars… (more)

▼

Biofuel sensors for measuring the ethanol and gasoline concentrations in bio-ethanol blends, have been studied world-wide and currently used in engine management in Flex-Fuel cars fabricated by amongst others, Ford Motor Company. However, water that results from ethanol sugar cane is inevitable present in the ethanol blend and requires a sensor that is capable of measuring the full ternary ethanol/gasoline/water compostion. This thesis presents design of biofuel sensors, which can be used for the determination of compositions of ternary liquid mixtures of ethanol, gasoline and water. Firstly, the technical background and societal relevance of this thesis are given. Subsequently, the different physical domains are introduced that are in principle suitable for liquid composition sensing, such as the electrical, the acoustic, the optical and the thermal domains. As a next step, the thermal domain was selected with injected heat flux, J_h, as the through parameter and the resulting temperature difference, ∆T, as the across parameter. The basic principle of thermal impedance spectroscopy by frequency scanning was presented. Next, the thermal equivalent circuit model was used to simplify the thermal problem by transferring the thermal issue into an electrical topic. The main design challenge is to have the heat injected into the liquid rather than the substrate and to have a temperature-difference measurement not affected by the presence of the thermally conductive substrate. Different design properties such as heater, sensors, doping level, heat efficiency improvement and thermopile optimization, are explained in detail. After the interpretation on design properties, the fabrication process is introduced in detail and followed by the fabrication results. Finally, measurement results were obtained and used for validating the simulations and model and for drawing the final research conclusions.

Electrical Engineering | Microelectronics

Advisors/Committee Members: Wolffenbuttel, R.F. (mentor), Bossche, A. (graduation committee), Verhoeven, C.J.M. (graduation committee), Ghaderi, M. (graduation committee), Delft University of Technology (degree granting institution).

Subjects/Keywords: Microstructure; Thermal impedance spectroscopy; Biofuels composition measurement

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Jiang, B. (. (2017). Microstructure for thermal impedance spectroscopy for biofuel composition measurement. (Masters Thesis). Delft University of Technology. Retrieved from http://resolver.tudelft.nl/uuid:aab4dd14-da61-44bd-be55-64ec9f567d3b

Chicago Manual of Style (16^th Edition):

Jiang, Bo (author). “Microstructure for thermal impedance spectroscopy for biofuel composition measurement.” 2017. Masters Thesis, Delft University of Technology. Accessed April 15, 2021. http://resolver.tudelft.nl/uuid:aab4dd14-da61-44bd-be55-64ec9f567d3b.

MLA Handbook (7^th Edition):

Jiang, Bo (author). “Microstructure for thermal impedance spectroscopy for biofuel composition measurement.” 2017. Web. 15 Apr 2021.

Vancouver:

Jiang B(. Microstructure for thermal impedance spectroscopy for biofuel composition measurement. [Internet] [Masters thesis]. Delft University of Technology; 2017. [cited 2021 Apr 15]. Available from: http://resolver.tudelft.nl/uuid:aab4dd14-da61-44bd-be55-64ec9f567d3b.

Council of Science Editors:

Jiang B(. Microstructure for thermal impedance spectroscopy for biofuel composition measurement. [Masters Thesis]. Delft University of Technology; 2017. Available from: http://resolver.tudelft.nl/uuid:aab4dd14-da61-44bd-be55-64ec9f567d3b

University of Waterloo

9. Ali, Areeb. CMOS Impedance Measurement Array for Cell Sensing.

Degree: 2015, University of Waterloo

URL: http://hdl.handle.net/10012/9097

► Impedance measurement plays a vital role in determining the physical and chemical properties of live cells under different environmental conditions and aids in the development… (more)

Subjects/Keywords: CMOS Impedance Measurement Array Cell Sensor Impedance-to-Digital Converter

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Ali, A. (2015). CMOS Impedance Measurement Array for Cell Sensing. (Thesis). University of Waterloo. Retrieved from http://hdl.handle.net/10012/9097

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Ali, Areeb. “CMOS Impedance Measurement Array for Cell Sensing.” 2015. Thesis, University of Waterloo. Accessed April 15, 2021. http://hdl.handle.net/10012/9097.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Ali, Areeb. “CMOS Impedance Measurement Array for Cell Sensing.” 2015. Web. 15 Apr 2021.

Vancouver:

Ali A. CMOS Impedance Measurement Array for Cell Sensing. [Internet] [Thesis]. University of Waterloo; 2015. [cited 2021 Apr 15]. Available from: http://hdl.handle.net/10012/9097.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Ali A. CMOS Impedance Measurement Array for Cell Sensing. [Thesis]. University of Waterloo; 2015. Available from: http://hdl.handle.net/10012/9097

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Delft University of Technology

10. Tan, J. (author). In-situ impedances measurement and influence of 2 k - 150 kHz disturbances on measurement of electrical parameters.

Degree: 2014, Delft University of Technology

URL: http://resolver.tudelft.nl/uuid:ad29420c-9a0d-418f-9151-d8f778850b0e

►

With the growth of the number of electric appliances which suffer from electromagnetic inference (EMI) in the frequency range 2 k – 150 kHz, the… (more)

▼

With the growth of the number of electric appliances which suffer from electromagnetic inference (EMI) in the frequency range 2 k – 150 kHz, the setting up of researches in this field has become more and more popular. Measuring impedances accurately in this frequency range is of great assistance for better understanding of the circuit as well as for EMI filter designs. Thus, this thesis aims to develop a safe, flexible and accurate in-situ measurement approach to measure the source and load impedances at 2 kHz – 150 kHz and then apply it to investigate the influences of the variable impedances on measurements of electrical parameters when experiencing disturbances. In this thesis, the current probe being one of the most important measurement devices is discussed first. To investigate the transfer impedance of the current probes used in the measurements a spectrum analyzer, a vector network analyzer (VNA) and a LCR meter are applied respectively. It is found that the input impedance on the wire side influences the bulk current injection (BCI) probe but not the normal current monitor probe in the transfer impedance measurements at discussed frequency range. The electric models are illustrated. Secondly, an in-situ measurement method – the three-probe method which is verified to be applicable at discussed frequency - is proposed. The measurement accuracy is guaranteed through a proper Fast Fourier Transform (FFT) process by collecting both amplitude and phase information of the measurement. In addition, the three-probe method was compared with its predecessor – the two-probe method which was proposed in 2004 to measure noise source impedance at 150 k – 30 MHz. Then the impedances measurement results of different sources and loads are illustrated by using this three-probe method. At last, by using a variable inductance/capacitance box to simulate different source conditions, it comes out that the loads which property will turn out to be capacitive at certain frequency (2 k – 150 kHz) are sensitive for source impedance variations. Their voltages and currents all are influenced significantly with the resonance between source and load impedances. Fortunately, with further investigation, this effect seems not to interfere with the reading of the smart meter under the test.

Electrical Power Engineering

Electrical Sustainable Energy

Electrical Engineering, Mathematics and Computer Science

Advisors/Committee Members: Ferreira, J.A. (mentor).

Subjects/Keywords: current probe; in-situ measurement; frequency 2 k 150 kHz; source impedance; load impedance

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Tan, J. (. (2014). In-situ impedances measurement and influence of 2 k - 150 kHz disturbances on measurement of electrical parameters. (Masters Thesis). Delft University of Technology. Retrieved from http://resolver.tudelft.nl/uuid:ad29420c-9a0d-418f-9151-d8f778850b0e

Chicago Manual of Style (16^th Edition):

Tan, J (author). “In-situ impedances measurement and influence of 2 k - 150 kHz disturbances on measurement of electrical parameters.” 2014. Masters Thesis, Delft University of Technology. Accessed April 15, 2021. http://resolver.tudelft.nl/uuid:ad29420c-9a0d-418f-9151-d8f778850b0e.

MLA Handbook (7^th Edition):

Tan, J (author). “In-situ impedances measurement and influence of 2 k - 150 kHz disturbances on measurement of electrical parameters.” 2014. Web. 15 Apr 2021.

Vancouver:

Tan J(. In-situ impedances measurement and influence of 2 k - 150 kHz disturbances on measurement of electrical parameters. [Internet] [Masters thesis]. Delft University of Technology; 2014. [cited 2021 Apr 15]. Available from: http://resolver.tudelft.nl/uuid:ad29420c-9a0d-418f-9151-d8f778850b0e.

Council of Science Editors:

Tan J(. In-situ impedances measurement and influence of 2 k - 150 kHz disturbances on measurement of electrical parameters. [Masters Thesis]. Delft University of Technology; 2014. Available from: http://resolver.tudelft.nl/uuid:ad29420c-9a0d-418f-9151-d8f778850b0e

Brno University of Technology

11. Zedník, Lukáš. Kapesní měřič indukčnosti a kapacity: Pocket inductance and capacitance meter.

Degree: 2014, Brno University of Technology

URL: http://hdl.handle.net/11012/24826

This thesis describes different capacitance and inductance measurement methods, design and realization of RLC-meter. Advisors/Committee Members: Dufek, Ivo (advisor), Frýza, Tomáš (referee).

Subjects/Keywords: Měření impedance; přímá číslicová (digitální) syntéza (DDS).; Impedance measurement; direct digital synthesis DDS.

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Zedník, L. (2014). Kapesní měřič indukčnosti a kapacity: Pocket inductance and capacitance meter. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/24826

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Zedník, Lukáš. “Kapesní měřič indukčnosti a kapacity: Pocket inductance and capacitance meter.” 2014. Thesis, Brno University of Technology. Accessed April 15, 2021. http://hdl.handle.net/11012/24826.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Zedník, Lukáš. “Kapesní měřič indukčnosti a kapacity: Pocket inductance and capacitance meter.” 2014. Web. 15 Apr 2021.

Vancouver:

Zedník L. Kapesní měřič indukčnosti a kapacity: Pocket inductance and capacitance meter. [Internet] [Thesis]. Brno University of Technology; 2014. [cited 2021 Apr 15]. Available from: http://hdl.handle.net/11012/24826.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Zedník L. Kapesní měřič indukčnosti a kapacity: Pocket inductance and capacitance meter. [Thesis]. Brno University of Technology; 2014. Available from: http://hdl.handle.net/11012/24826

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

12. Zedník, Lukáš. Kapesní měřič indukčnosti a kapacity: Pocket inductance and capacitance meter.

Degree: 2014, Brno University of Technology

URL: http://hdl.handle.net/11012/10202

This thesis describes different capacitance and inductance measurement methods, design and realization of RLC-meter. Advisors/Committee Members: Dufek, Ivo (advisor), Frýza, Tomáš (referee).

Subjects/Keywords: Měření impedance; přímá číslicová (digitální) syntéza (DDS).; Impedance measurement; direct digital synthesis DDS.

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Zedník, L. (2014). Kapesní měřič indukčnosti a kapacity: Pocket inductance and capacitance meter. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/10202

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Zedník, Lukáš. “Kapesní měřič indukčnosti a kapacity: Pocket inductance and capacitance meter.” 2014. Thesis, Brno University of Technology. Accessed April 15, 2021. http://hdl.handle.net/11012/10202.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Zedník, Lukáš. “Kapesní měřič indukčnosti a kapacity: Pocket inductance and capacitance meter.” 2014. Web. 15 Apr 2021.

Vancouver:

Zedník L. Kapesní měřič indukčnosti a kapacity: Pocket inductance and capacitance meter. [Internet] [Thesis]. Brno University of Technology; 2014. [cited 2021 Apr 15]. Available from: http://hdl.handle.net/11012/10202.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Zedník L. Kapesní měřič indukčnosti a kapacity: Pocket inductance and capacitance meter. [Thesis]. Brno University of Technology; 2014. Available from: http://hdl.handle.net/11012/10202

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

13. Dejdar, Petr. GUI pro automatizaci měření impedance na Agilent 4294A: GUI for impedance measurement automation on Agilent 4294A.

Degree: 2019, Brno University of Technology

URL: http://hdl.handle.net/11012/61614

► The goal of the bachelor thesis is to develop a control software for Agilent 4294A impedance analyser. Text of the theoretical section explains the dataflow… (more)

Subjects/Keywords: Agilent 4294A; GPIB; Impedanční analyzátor; Měření impedance; NI LabVIEW; Agilent 4294A; GPIB; Impedance analyzer; Impedance measurement; NI LabVIEW

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Dejdar, P. (2019). GUI pro automatizaci měření impedance na Agilent 4294A: GUI for impedance measurement automation on Agilent 4294A. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/61614

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Dejdar, Petr. “GUI pro automatizaci měření impedance na Agilent 4294A: GUI for impedance measurement automation on Agilent 4294A.” 2019. Thesis, Brno University of Technology. Accessed April 15, 2021. http://hdl.handle.net/11012/61614.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Dejdar, Petr. “GUI pro automatizaci měření impedance na Agilent 4294A: GUI for impedance measurement automation on Agilent 4294A.” 2019. Web. 15 Apr 2021.

Vancouver:

Dejdar P. GUI pro automatizaci měření impedance na Agilent 4294A: GUI for impedance measurement automation on Agilent 4294A. [Internet] [Thesis]. Brno University of Technology; 2019. [cited 2021 Apr 15]. Available from: http://hdl.handle.net/11012/61614.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Dejdar P. GUI pro automatizaci měření impedance na Agilent 4294A: GUI for impedance measurement automation on Agilent 4294A. [Thesis]. Brno University of Technology; 2019. Available from: http://hdl.handle.net/11012/61614

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

14. Jurica, Dušan. Automatizace měření impedancí: Automatization of impedance measurement.

Degree: 2019, Brno University of Technology

URL: http://hdl.handle.net/11012/16287

► Concern of this Bachelor's is mapping methods used in impedance measurement in HF engineering and subsequent use of these methods for software development, which will… (more)

Subjects/Keywords: Měření impedance; sběrnice GPIB; Smithův diagram; impedanční přizpůsobení; kalibrace; Impedance measurement; general purpose interface bus - GPIB; Smith chart; impedance matching; calibration

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Jurica, D. (2019). Automatizace měření impedancí: Automatization of impedance measurement. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/16287

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Jurica, Dušan. “Automatizace měření impedancí: Automatization of impedance measurement.” 2019. Thesis, Brno University of Technology. Accessed April 15, 2021. http://hdl.handle.net/11012/16287.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Jurica, Dušan. “Automatizace měření impedancí: Automatization of impedance measurement.” 2019. Web. 15 Apr 2021.

Vancouver:

Jurica D. Automatizace měření impedancí: Automatization of impedance measurement. [Internet] [Thesis]. Brno University of Technology; 2019. [cited 2021 Apr 15]. Available from: http://hdl.handle.net/11012/16287.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Jurica D. Automatizace měření impedancí: Automatization of impedance measurement. [Thesis]. Brno University of Technology; 2019. Available from: http://hdl.handle.net/11012/16287

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

15. Wiesner, Jiří. Návrh vf měřiče impedance: The design of rf impedance meter.

Degree: 2018, Brno University of Technology

URL: http://hdl.handle.net/11012/38805

► The first part deals with the basic methods for measuring an unknown impedance. After determining the parameters of the desired impedance analyzer method was chosen… (more)

Subjects/Keywords: Měření impedance; můstková metoda měření; Agilent přiručka; impedanční analyzátor; DDS.; Impedance measuring; bridge method of measurement; Agilent Handbook; impedance analyzer; DDS.

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Wiesner, J. (2018). Návrh vf měřiče impedance: The design of rf impedance meter. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/38805

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Wiesner, Jiří. “Návrh vf měřiče impedance: The design of rf impedance meter.” 2018. Thesis, Brno University of Technology. Accessed April 15, 2021. http://hdl.handle.net/11012/38805.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Wiesner, Jiří. “Návrh vf měřiče impedance: The design of rf impedance meter.” 2018. Web. 15 Apr 2021.

Vancouver:

Wiesner J. Návrh vf měřiče impedance: The design of rf impedance meter. [Internet] [Thesis]. Brno University of Technology; 2018. [cited 2021 Apr 15]. Available from: http://hdl.handle.net/11012/38805.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Wiesner J. Návrh vf měřiče impedance: The design of rf impedance meter. [Thesis]. Brno University of Technology; 2018. Available from: http://hdl.handle.net/11012/38805

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

16. Permata, Diah. A study on impedance measurement of small-capacitance circuit using transient waveforms : 過渡波形を用いた微小容量からなる回路インピーダンス測定法の一研究; カトハケイオモチイタビショウヨウリョウカラナルカイロインピーダンスソクテイホウノイチケンキュウ.

Degree: 博士(工学), 2015, Doshisha University / 同志社大学

URL: https://doors.doshisha.ac.jp/duar/repository/ir/17590/?lang=0 ; http://dx.doi.org/10.14988/di.2017.0000016233

► A measurement method of small-capacitance using transient waveforms is proposed in this thesis. A pi-circuit is used to express the stray capacitors between terminals and… (more)

Subjects/Keywords: Impedance Measurement; Small-Capacitance Circuit; Stray Capacitance; Transient Waveforms; Lightning Surge

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Permata, D. (2015). A study on impedance measurement of small-capacitance circuit using transient waveforms : 過渡波形を用いた微小容量からなる回路インピーダンス測定法の一研究; カトハケイオモチイタビショウヨウリョウカラナルカイロインピーダンスソクテイホウノイチケンキュウ. (Thesis). Doshisha University / 同志社大学. Retrieved from https://doors.doshisha.ac.jp/duar/repository/ir/17590/?lang=0 ; http://dx.doi.org/10.14988/di.2017.0000016233

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Permata, Diah. “A study on impedance measurement of small-capacitance circuit using transient waveforms : 過渡波形を用いた微小容量からなる回路インピーダンス測定法の一研究; カトハケイオモチイタビショウヨウリョウカラナルカイロインピーダンスソクテイホウノイチケンキュウ.” 2015. Thesis, Doshisha University / 同志社大学. Accessed April 15, 2021. https://doors.doshisha.ac.jp/duar/repository/ir/17590/?lang=0 ; http://dx.doi.org/10.14988/di.2017.0000016233.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Permata, Diah. “A study on impedance measurement of small-capacitance circuit using transient waveforms : 過渡波形を用いた微小容量からなる回路インピーダンス測定法の一研究; カトハケイオモチイタビショウヨウリョウカラナルカイロインピーダンスソクテイホウノイチケンキュウ.” 2015. Web. 15 Apr 2021.

Vancouver:

Permata D. A study on impedance measurement of small-capacitance circuit using transient waveforms : 過渡波形を用いた微小容量からなる回路インピーダンス測定法の一研究; カトハケイオモチイタビショウヨウリョウカラナルカイロインピーダンスソクテイホウノイチケンキュウ. [Internet] [Thesis]. Doshisha University / 同志社大学; 2015. [cited 2021 Apr 15]. Available from: https://doors.doshisha.ac.jp/duar/repository/ir/17590/?lang=0 ; http://dx.doi.org/10.14988/di.2017.0000016233.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Permata D. A study on impedance measurement of small-capacitance circuit using transient waveforms : 過渡波形を用いた微小容量からなる回路インピーダンス測定法の一研究; カトハケイオモチイタビショウヨウリョウカラナルカイロインピーダンスソクテイホウノイチケンキュウ. [Thesis]. Doshisha University / 同志社大学; 2015. Available from: https://doors.doshisha.ac.jp/duar/repository/ir/17590/?lang=0 ; http://dx.doi.org/10.14988/di.2017.0000016233

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

University of Adelaide

17. Rohadi, Nanang. Global sensitivity analysis of impedance measurement algorithms implememented in intelligent electronic devices.

Degree: 2013, University of Adelaide

URL: http://hdl.handle.net/2440/84961

► A novel methodology for testing performance of impedance measurement algorithms used in transmission line protection schemes is developed. Nowadays, impedance measurement algorithms are software functions… (more)

▼ A novel methodology for testing performance of impedance measurement algorithms used in transmission line protection schemes is developed. Nowadays, impedance measurement algorithms are software functions implemented in the multifunction Intelligence Electronic Devices (IEDs) responsible for overall monitoring, protection and control of transmission lines. Accurate impedance measurement during fault conditions is the key in successful performance of the line protection as well as fault location functions of an IED. This thesis investigates a typical practical situation where only short-term fault records of voltage and current measurements from one side of a transmission line are used as inputs in the impedance measurement algorithm. Current flowing into the fault from the remote terminal of transmission line as well as fault impedance can influence significantly accuracy of impedance measurement. Since these two quantities are not measured, we require a systematic tool which will assess sensitivity of impedance measurement to those factors. At present, these sensitivities are obtained in heuristic and ad hoc manner during application testing done by utilities before commissioning of new IEDs. Situation in practice can be increasingly complex and this kind of unsystematic testing approach can fail. The thesis addresses those practical complex cases in the systematic manner. In these cases we encounter the following configurations of transmission lines with new not measured factors: - parallel closely spaced lines, where the effect of electromagnetic mutual coupling can be significant; - series capacitive compensation of transmission line, where capacitance of the compensation device can be unknown; - three-terminal lines, where measurements on the tapped line are not available. The proposed systematic sensitivity testing tool comprises of a transmission line electromagnetic simulation module and a Global Sensitivity Analysis (GSA) module. The software packages commonly used by industry are employed to implement those modules: the DIgSILENT software for the line simulation module and the SIMLAB software for the GSA module. The simulation module is used to simulate large number of fault scenarios for all samples in the factor space, while the GSA module is responsible for creating a set of specific samples in the factor space as well as for sensitivity analysis. The commercial multifunctional IED SEL-421 from the Schweitezer Engineering Laboratories has been used to demonstrate the proposed sensitivity analysis tool. The IED functions has been modelled in DIgSILENT environment and integrated into the simulation module. Test automation program has been written using the DIgSILENT Programming Language (DPL) so fully automatic and integrated performance of the simulation and the GSA modules has been achieved. The GSA module relies on the Quasi-Monte Carlo (QMC) technique with the Sobol’s quasi random sampling and the Morris method is used in fast factor pre-screening in order to remove non-influential factors before… Advisors/Committee Members: Zivanovic, Rastko (advisor), School of Electrical and Electronic Engineering (school).

Subjects/Keywords: Global Sensitivity Analysis; transmission line faults; distance protection; impedance measurement algorithms

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Rohadi, N. (2013). Global sensitivity analysis of impedance measurement algorithms implememented in intelligent electronic devices. (Thesis). University of Adelaide. Retrieved from http://hdl.handle.net/2440/84961

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Rohadi, Nanang. “Global sensitivity analysis of impedance measurement algorithms implememented in intelligent electronic devices.” 2013. Thesis, University of Adelaide. Accessed April 15, 2021. http://hdl.handle.net/2440/84961.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Rohadi, Nanang. “Global sensitivity analysis of impedance measurement algorithms implememented in intelligent electronic devices.” 2013. Web. 15 Apr 2021.

Vancouver:

Rohadi N. Global sensitivity analysis of impedance measurement algorithms implememented in intelligent electronic devices. [Internet] [Thesis]. University of Adelaide; 2013. [cited 2021 Apr 15]. Available from: http://hdl.handle.net/2440/84961.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Rohadi N. Global sensitivity analysis of impedance measurement algorithms implememented in intelligent electronic devices. [Thesis]. University of Adelaide; 2013. Available from: http://hdl.handle.net/2440/84961

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

University of Manchester

18. Robinson, Rebecca Louise. Experimental study of electrophysiology using the fEITER system.

Degree: PhD, 2011, University of Manchester

URL: https://www.research.manchester.ac.uk/portal/en/theses/experimental-study-of-electrophysiology-using-the-feiter-system(399260d4-6c11-4227-9633-4d76f933e5af).html ; http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.532222

► Within neurophysiology, there is need for improvements to functional brain imaging devices. Neural processing within the brain occurs on milli-second through to second timescales. Currently… (more)

Subjects/Keywords: 615.84; Electrical Impedance Tomography; Physiological Measurement; Evoked Potentials

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Robinson, R. L. (2011). Experimental study of electrophysiology using the fEITER system. (Doctoral Dissertation). University of Manchester. Retrieved from https://www.research.manchester.ac.uk/portal/en/theses/experimental-study-of-electrophysiology-using-the-feiter-system(399260d4-6c11-4227-9633-4d76f933e5af).html ; http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.532222

Chicago Manual of Style (16^th Edition):

Robinson, Rebecca Louise. “Experimental study of electrophysiology using the fEITER system.” 2011. Doctoral Dissertation, University of Manchester. Accessed April 15, 2021. https://www.research.manchester.ac.uk/portal/en/theses/experimental-study-of-electrophysiology-using-the-feiter-system(399260d4-6c11-4227-9633-4d76f933e5af).html ; http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.532222.

MLA Handbook (7^th Edition):

Robinson, Rebecca Louise. “Experimental study of electrophysiology using the fEITER system.” 2011. Web. 15 Apr 2021.

Vancouver:

Robinson RL. Experimental study of electrophysiology using the fEITER system. [Internet] [Doctoral dissertation]. University of Manchester; 2011. [cited 2021 Apr 15]. Available from: https://www.research.manchester.ac.uk/portal/en/theses/experimental-study-of-electrophysiology-using-the-feiter-system(399260d4-6c11-4227-9633-4d76f933e5af).html ; http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.532222.

Council of Science Editors:

Robinson RL. Experimental study of electrophysiology using the fEITER system. [Doctoral Dissertation]. University of Manchester; 2011. Available from: https://www.research.manchester.ac.uk/portal/en/theses/experimental-study-of-electrophysiology-using-the-feiter-system(399260d4-6c11-4227-9633-4d76f933e5af).html ; http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.532222

Hong Kong University of Science and Technology

19. Dai, Hin Man. Light weight low frequency sound focus lens.

Degree: 2005, Hong Kong University of Science and Technology

URL: http://repository.ust.hk/ir/Record/1783.1-5454 ; https://doi.org/10.14711/thesis-b922547 ; http://repository.ust.hk/ir/bitstream/1783.1-5454/1/th_redirect.html

► Resonant Sonic Material (RSM) transmission spectrum has dips and large phase shifts within low frequency. By using Kirchhoff scalar diffraction theorem, it shows possibility of… (more)

Subjects/Keywords: Acoustical materials ; Acoustic impedance – Measurement

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Dai, H. M. (2005). Light weight low frequency sound focus lens. (Thesis). Hong Kong University of Science and Technology. Retrieved from http://repository.ust.hk/ir/Record/1783.1-5454 ; https://doi.org/10.14711/thesis-b922547 ; http://repository.ust.hk/ir/bitstream/1783.1-5454/1/th_redirect.html

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Dai, Hin Man. “Light weight low frequency sound focus lens.” 2005. Thesis, Hong Kong University of Science and Technology. Accessed April 15, 2021. http://repository.ust.hk/ir/Record/1783.1-5454 ; https://doi.org/10.14711/thesis-b922547 ; http://repository.ust.hk/ir/bitstream/1783.1-5454/1/th_redirect.html.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Dai, Hin Man. “Light weight low frequency sound focus lens.” 2005. Web. 15 Apr 2021.

Vancouver:

Dai HM. Light weight low frequency sound focus lens. [Internet] [Thesis]. Hong Kong University of Science and Technology; 2005. [cited 2021 Apr 15]. Available from: http://repository.ust.hk/ir/Record/1783.1-5454 ; https://doi.org/10.14711/thesis-b922547 ; http://repository.ust.hk/ir/bitstream/1783.1-5454/1/th_redirect.html.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Dai HM. Light weight low frequency sound focus lens. [Thesis]. Hong Kong University of Science and Technology; 2005. Available from: http://repository.ust.hk/ir/Record/1783.1-5454 ; https://doi.org/10.14711/thesis-b922547 ; http://repository.ust.hk/ir/bitstream/1783.1-5454/1/th_redirect.html

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Hong Kong University of Science and Technology

20. Cheng, Chun-kwong. Impedance measurement of local resonant sonic materials.

Degree: 2003, Hong Kong University of Science and Technology

URL: http://repository.ust.hk/ir/Record/1783.1-5430 ; https://doi.org/10.14711/thesis-b802509 ; http://repository.ust.hk/ir/bitstream/1783.1-5430/1/th_redirect.html

► Resonant Sonic Crystal is a very high impedance material to attenuate sound with low frequency, which was firstly introduced by the research team led by… (more)

Subjects/Keywords: Acoustic impedance – Measurement ; Acoustical materials

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Cheng, C. (2003). Impedance measurement of local resonant sonic materials. (Thesis). Hong Kong University of Science and Technology. Retrieved from http://repository.ust.hk/ir/Record/1783.1-5430 ; https://doi.org/10.14711/thesis-b802509 ; http://repository.ust.hk/ir/bitstream/1783.1-5430/1/th_redirect.html

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Cheng, Chun-kwong. “Impedance measurement of local resonant sonic materials.” 2003. Thesis, Hong Kong University of Science and Technology. Accessed April 15, 2021. http://repository.ust.hk/ir/Record/1783.1-5430 ; https://doi.org/10.14711/thesis-b802509 ; http://repository.ust.hk/ir/bitstream/1783.1-5430/1/th_redirect.html.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Cheng, Chun-kwong. “Impedance measurement of local resonant sonic materials.” 2003. Web. 15 Apr 2021.

Vancouver:

Cheng C. Impedance measurement of local resonant sonic materials. [Internet] [Thesis]. Hong Kong University of Science and Technology; 2003. [cited 2021 Apr 15]. Available from: http://repository.ust.hk/ir/Record/1783.1-5430 ; https://doi.org/10.14711/thesis-b802509 ; http://repository.ust.hk/ir/bitstream/1783.1-5430/1/th_redirect.html.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Cheng C. Impedance measurement of local resonant sonic materials. [Thesis]. Hong Kong University of Science and Technology; 2003. Available from: http://repository.ust.hk/ir/Record/1783.1-5430 ; https://doi.org/10.14711/thesis-b802509 ; http://repository.ust.hk/ir/bitstream/1783.1-5430/1/th_redirect.html

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Portland State University

21. Hosbein, Kathryn Nicole. The Application of Electrochemical Impedance Spectroscopy to Immediately Diagnose the Protective Quality of Coatings on Artistic and Architectural Metalwork.

Degree: MS(M.S.) in Chemistry, Chemistry, 2016, Portland State University

URL: https://pdxscholar.library.pdx.edu/open_access_etds/3324

► Corrosion is a spontaneous process that causes irreversible damage to nearly all metals, which has world-wide implications for architectural and artistic metalwork, such as… (more)

▼ Corrosion is a spontaneous process that causes irreversible damage to nearly all metals, which has world-wide implications for architectural and artistic metalwork, such as bridges, buildings, airplanes and sculptures. Protective coatings such as wax, paint, or polymeric clear coatings are used to prolong the lifetime of metals such as steel and bronze. Unfortunately, these coatings fail over time due to oxidative damage by UV rays and by failure to exclude water that can carry salts and pollutants that cause corrosion of the underlying substrate. The current method of coating assessment is visual inspection but when coating failure is detected at this stage, irreversible damage has already occurred to the metal substrate. Diagnosing coating quality on artistic metalwork is a unique challenge as it requires a method that is non-destructive as to not alter the aesthetic of the piece. A non-destructive technique or device that can detect early signs of coating failure in the field (such as at a sculpture park) does not currently exist. The aim of this thesis is to develop a method that can be readily used in the field by a conservator to quickly diagnose the protective state of a coating on a sculpture in order to provide localized treatment. Electrochemical impedance spectroscopy (EIS) is a method currently used to study protective coatings in the lab. The technique itself is non-destructive but the most common electrochemical cell used with it must be used on a planar substrate and requires that a portion of coating be removed. Not only is the current method destructive, but the data produced by EIS is complicated and time consuming to analyze. These issues provide the foundation for this project. This thesis first proposes multiple methods to quickly analyze the complicated data traditionally collected through EIS. Three quick analysis methods, including the estimation of the derivative at one single frequency in EIS spectra, was successfully used to categorize coating quality of five different coating types. Using this quick analysis can aid conservators in assessing coating condition without the need for extensive training in EIS data interpretation. This thesis also proposes a method to measure early warning signs of coating degradation through a co-planar hydrogel electrochemical cell paired with EIS. The configuration of this co-planar hydrogel cell negates the need for the removal of the coating and can be used on multiple types of surfaces because of its flexibility, therefore overcoming the drawbacks of the traditional EIS electrochemical cell. Data provided demonstrates that this co-planar hydrogel provides similar information, when compared to the standard electrochemical cell, about the bulk of the protective coating. Unique to the co-planar hydrogel cell, information about surface degradation is provided during EIS measurements. This provides a warning sign before bulk degradation of the coating and therefore before any damage to the underlying substrate has occurred. Advisors/Committee Members: Tami Lasseter Clare.

Subjects/Keywords: Protective coatings – Testing; Corrosion and anti-corrosives – Measurement; Impedance spectroscopy; Chemistry

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Hosbein, K. N. (2016). The Application of Electrochemical Impedance Spectroscopy to Immediately Diagnose the Protective Quality of Coatings on Artistic and Architectural Metalwork. (Masters Thesis). Portland State University. Retrieved from https://pdxscholar.library.pdx.edu/open_access_etds/3324

Chicago Manual of Style (16^th Edition):

Hosbein, Kathryn Nicole. “The Application of Electrochemical Impedance Spectroscopy to Immediately Diagnose the Protective Quality of Coatings on Artistic and Architectural Metalwork.” 2016. Masters Thesis, Portland State University. Accessed April 15, 2021. https://pdxscholar.library.pdx.edu/open_access_etds/3324.

MLA Handbook (7^th Edition):

Hosbein, Kathryn Nicole. “The Application of Electrochemical Impedance Spectroscopy to Immediately Diagnose the Protective Quality of Coatings on Artistic and Architectural Metalwork.” 2016. Web. 15 Apr 2021.

Vancouver:

Hosbein KN. The Application of Electrochemical Impedance Spectroscopy to Immediately Diagnose the Protective Quality of Coatings on Artistic and Architectural Metalwork. [Internet] [Masters thesis]. Portland State University; 2016. [cited 2021 Apr 15]. Available from: https://pdxscholar.library.pdx.edu/open_access_etds/3324.

Council of Science Editors:

Hosbein KN. The Application of Electrochemical Impedance Spectroscopy to Immediately Diagnose the Protective Quality of Coatings on Artistic and Architectural Metalwork. [Masters Thesis]. Portland State University; 2016. Available from: https://pdxscholar.library.pdx.edu/open_access_etds/3324

Michigan State University

22. Ruhl, Harry DeVere. Input impedance measurements of disk cone antennas.

Degree: MS, 1952, Michigan State University

URL: http://etd.lib.msu.edu/islandora/object/etd:8454

Subjects/Keywords: Antennas (Electronics); Impedance (Electricity) – Measurement

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Ruhl, H. D. (1952). Input impedance measurements of disk cone antennas. (Masters Thesis). Michigan State University. Retrieved from http://etd.lib.msu.edu/islandora/object/etd:8454

Chicago Manual of Style (16^th Edition):

Ruhl, Harry DeVere. “Input impedance measurements of disk cone antennas.” 1952. Masters Thesis, Michigan State University. Accessed April 15, 2021. http://etd.lib.msu.edu/islandora/object/etd:8454.

MLA Handbook (7^th Edition):

Ruhl, Harry DeVere. “Input impedance measurements of disk cone antennas.” 1952. Web. 15 Apr 2021.

Vancouver:

Ruhl HD. Input impedance measurements of disk cone antennas. [Internet] [Masters thesis]. Michigan State University; 1952. [cited 2021 Apr 15]. Available from: http://etd.lib.msu.edu/islandora/object/etd:8454.

Council of Science Editors:

Ruhl HD. Input impedance measurements of disk cone antennas. [Masters Thesis]. Michigan State University; 1952. Available from: http://etd.lib.msu.edu/islandora/object/etd:8454

Virginia Tech

23. Shen, Zhiyu. Online Measurement of Three-phase AC Power System Impedance in Synchronous Coordinates.

Degree: PhD, Electrical Engineering, 2013, Virginia Tech

URL: http://hdl.handle.net/10919/49258

► Over the last two decades there has been an increased use of three-phase AC power systems that may not be connected to the main power… (more)

▼ Over the last two decades there has been an increased use of three-phase AC power systems that may not be connected to the main power grid, such as the power systems on more-electric airplane and all-electric ships. Power-electronic converters are usually a significant part of these systems, which provide excellent performance. But their negative incremental impedance nature increases the possibility of system instability. A small-signal analysis that uses interface impedances defined in the synchronous frame is developed by Belkhayat at Purdue in the mid-90s to access the system stability. The system impedance varies with the operating point. Thus the impedance has to be obtained online at the desired operating point, on even in situ. Literature investigates its use with system models, but the lack of equipment to measure such impedance prevents its use in practical systems. Measurement of impedances of each component enables the prediction of system stability before building the real system. The impedance data can also be used to investigate the instability in the system after it is built. The capability of impedance measurement can save the cost and time of system integrators. After reviewing the state-of-the-art development of impedance measurement systems, the dissertation analyzes several systematical error sources in the system, which includes the signal processing and sampling circuits, the phase estimation for coordinate transformation and the injection device connection, and proposes the solution to reduce their influence. Improved algorithm and system architecture are proposed to increase the measurement speed and accuracy. Chirp signal is used as an excitation signal to extract impedances at a group of frequencies at one time. The use of both shunt current injection and series voltage injection improves the SNR of measured signal. Oversampling, cross-correlation and frequency domain averaging technique are used to further reduce the influence of noise. An instrument is built based on the proposed solution. A voltage source inverter is used to generate the perturbation. A PXI computer is used for real-time signal processing. A PC is used for data post processing and measurement process control. Software is developed to fully automate the measurement. The designed unit is tested with various linear and nonlinear load. The test result shows the validity of the proposed solution. Advisors/Committee Members: Boroyevich, Dushan (committeechair), Lu, Guo Quan (committee member), Lindner, Douglas K. (committee member), Mattavelli, Paolo (committee member), Lesko, John J. (committee member).

Subjects/Keywords: three-phase AC power system; impedance measurement; synchronous coordinates; system stability

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Shen, Z. (2013). Online Measurement of Three-phase AC Power System Impedance in Synchronous Coordinates. (Doctoral Dissertation). Virginia Tech. Retrieved from http://hdl.handle.net/10919/49258

Chicago Manual of Style (16^th Edition):

Shen, Zhiyu. “Online Measurement of Three-phase AC Power System Impedance in Synchronous Coordinates.” 2013. Doctoral Dissertation, Virginia Tech. Accessed April 15, 2021. http://hdl.handle.net/10919/49258.

MLA Handbook (7^th Edition):

Shen, Zhiyu. “Online Measurement of Three-phase AC Power System Impedance in Synchronous Coordinates.” 2013. Web. 15 Apr 2021.

Vancouver:

Shen Z. Online Measurement of Three-phase AC Power System Impedance in Synchronous Coordinates. [Internet] [Doctoral dissertation]. Virginia Tech; 2013. [cited 2021 Apr 15]. Available from: http://hdl.handle.net/10919/49258.

Council of Science Editors:

Shen Z. Online Measurement of Three-phase AC Power System Impedance in Synchronous Coordinates. [Doctoral Dissertation]. Virginia Tech; 2013. Available from: http://hdl.handle.net/10919/49258

University of Alberta

24. Dyck, Matthew D. Measuring the Dynamic Impedance of the Human Arm.

Degree: MS, Department of Electrical and Computer Engineering, 2013, University of Alberta

URL: https://era.library.ualberta.ca/files/rf55z923v

► This thesis presents techniques to measure the human arm's mechanical impedance using a rehabilitation robot, drawing applications to telerehabilitation and patient motor function assessment. Conventional… (more)

Subjects/Keywords: mechanical impedance; rehabilitation robotics; human arm; modeling; system identification; passivity; impedance measurement; control systems; virtual sensor; telerehabilitation; stability analysis; modelling

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Dyck, M. D. (2013). Measuring the Dynamic Impedance of the Human Arm. (Masters Thesis). University of Alberta. Retrieved from https://era.library.ualberta.ca/files/rf55z923v

Chicago Manual of Style (16^th Edition):

Dyck, Matthew D. “Measuring the Dynamic Impedance of the Human Arm.” 2013. Masters Thesis, University of Alberta. Accessed April 15, 2021. https://era.library.ualberta.ca/files/rf55z923v.

MLA Handbook (7^th Edition):

Dyck, Matthew D. “Measuring the Dynamic Impedance of the Human Arm.” 2013. Web. 15 Apr 2021.

Vancouver:

Dyck MD. Measuring the Dynamic Impedance of the Human Arm. [Internet] [Masters thesis]. University of Alberta; 2013. [cited 2021 Apr 15]. Available from: https://era.library.ualberta.ca/files/rf55z923v.

Council of Science Editors:

Dyck MD. Measuring the Dynamic Impedance of the Human Arm. [Masters Thesis]. University of Alberta; 2013. Available from: https://era.library.ualberta.ca/files/rf55z923v

University of Ottawa

25. Acimovic, Igor. Contributions to the Design of RF Power Amplifiers .

Degree: 2013, University of Ottawa

URL: http://hdl.handle.net/10393/24406

► In this thesis we introduce a two-way Doherty amplifier architecture with multiple feedbacks for digital predistortion based on impedance-inverting directional coupler (transcoupler). The tunable two-way… (more)

Subjects/Keywords: Power amplifier (PA); Doherty amplifier; load-pull measurement; efficiency enhancement; peak-to-average; impedance matching; linearity; impedance modulation

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Acimovic, I. (2013). Contributions to the Design of RF Power Amplifiers . (Thesis). University of Ottawa. Retrieved from http://hdl.handle.net/10393/24406

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Acimovic, Igor. “Contributions to the Design of RF Power Amplifiers .” 2013. Thesis, University of Ottawa. Accessed April 15, 2021. http://hdl.handle.net/10393/24406.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Acimovic, Igor. “Contributions to the Design of RF Power Amplifiers .” 2013. Web. 15 Apr 2021.

Vancouver:

Acimovic I. Contributions to the Design of RF Power Amplifiers . [Internet] [Thesis]. University of Ottawa; 2013. [cited 2021 Apr 15]. Available from: http://hdl.handle.net/10393/24406.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Acimovic I. Contributions to the Design of RF Power Amplifiers . [Thesis]. University of Ottawa; 2013. Available from: http://hdl.handle.net/10393/24406

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

University of Florida

26. Sankar, Viswanath. Investigation and Mitigation of Abiotic Factors Affecting Reliability of Microelectrode Arrays in Chronic Neural Implants.

Degree: PhD, Electrical and Computer Engineering, 2013, University of Florida

URL: https://ufdc.ufl.edu/UFE0045857

► Brain-Machine Interfaces are designed with the intention of improving the quality of life of individuals with motor disabilities such as paralysis by providing an alternative… (more)

▼ Brain-Machine Interfaces are designed with the intention of improving the quality of life of individuals with motor disabilities such as paralysis by providing an alternative communication pathway via the control of prosthetic devices. One of the major challenges that the BMI research community is facing now is to develop a fully implantable system that is capable of recording high quality neural signals with high spatial resolution for the maximum number of years (preferably the lifetime of the patient). However the current electrodes fail after a few years of implantation owing to several biological and non-biological causes. A systematic study is needed to understand the degree of impact of the biotic and abiotic factors on the failure mode of electrode arrays. Such an understanding will help in the development of more robust and efficient implants which could be reliably used for chronic applications. The focus of this research is to investigate different abiotic factors such as micromotion-induced strain, insulation delamination, and corrosion of the recording site that play a major role in the failure of chronic microelectrodes. The first part of this work investigates the engineering of a highly compliant cable that can provide front-end strain relief to the tissue, and thereby mitigate tissue immune response due to micromotion. A serpentine shaped electrode was designed as a possible solution for front-end strain relief. The cable compliance was calculated using analytical and numerical methods, and prototypes were fabricated and tested. The test results showed that the serpentine cables are up to 10 times more compliant than the straight cables. In the second part, the association between the electrode surface morphology variations and the electrode impedance was evaluated using numerical simulations and models were developed using COMSOL Multiphysics finite element modeling (FEM) package and validated using in-vitro experiments. New materials such as benzocyclobutene and hafnium oxide, which are good candidates to be more robust than polyimide or parylene-C, were investigated for probe insulation. Microwire samples were also surface modified using Focused Ion Beam milling process at the recording surface and tested under in-vitro conditions. ( en ) Advisors/Committee Members: Nishida, Toshikazu (committee chair), Yoon, Yong Kyu (committee member), Xie, Huikai (committee member), Taylor, Curtis (committee member), Sanchez, Justin C (committee member).

Subjects/Keywords: Corrosion; Electrodes; Impedance measurement; Insulation; Polyimides; Serpentine; Signals; Silicon; Tungsten; Wires; corrosion – fabrication – fib – impedance – insulation – materials – mems – microelectrodes – neural – reliability

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Sankar, V. (2013). Investigation and Mitigation of Abiotic Factors Affecting Reliability of Microelectrode Arrays in Chronic Neural Implants. (Doctoral Dissertation). University of Florida. Retrieved from https://ufdc.ufl.edu/UFE0045857

Chicago Manual of Style (16^th Edition):

Sankar, Viswanath. “Investigation and Mitigation of Abiotic Factors Affecting Reliability of Microelectrode Arrays in Chronic Neural Implants.” 2013. Doctoral Dissertation, University of Florida. Accessed April 15, 2021. https://ufdc.ufl.edu/UFE0045857.

MLA Handbook (7^th Edition):

Sankar, Viswanath. “Investigation and Mitigation of Abiotic Factors Affecting Reliability of Microelectrode Arrays in Chronic Neural Implants.” 2013. Web. 15 Apr 2021.

Vancouver:

Sankar V. Investigation and Mitigation of Abiotic Factors Affecting Reliability of Microelectrode Arrays in Chronic Neural Implants. [Internet] [Doctoral dissertation]. University of Florida; 2013. [cited 2021 Apr 15]. Available from: https://ufdc.ufl.edu/UFE0045857.

Council of Science Editors:

Sankar V. Investigation and Mitigation of Abiotic Factors Affecting Reliability of Microelectrode Arrays in Chronic Neural Implants. [Doctoral Dissertation]. University of Florida; 2013. Available from: https://ufdc.ufl.edu/UFE0045857

Brno University of Technology

27. Slovák, Martin. Obslužný SW pro RLC metr HIOKI 3532: Control Software for RLC meter HIOKI 3532.

Degree: 2018, Brno University of Technology

URL: http://hdl.handle.net/11012/2512

► Aim of work gets up on questions and methods about measuring by RLC meter and realize control software for RLC meter HIOKI 3532. Theoretic part… (more)

Subjects/Keywords: Měření impedance; GPIB; LabVIEW; HIOKI 3532; obslužný software; Impedance measurement; GPIB; LabVIEW; HIOKI 3532; control software

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Slovák, M. (2018). Obslužný SW pro RLC metr HIOKI 3532: Control Software for RLC meter HIOKI 3532. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/2512

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Slovák, Martin. “Obslužný SW pro RLC metr HIOKI 3532: Control Software for RLC meter HIOKI 3532.” 2018. Thesis, Brno University of Technology. Accessed April 15, 2021. http://hdl.handle.net/11012/2512.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Slovák, Martin. “Obslužný SW pro RLC metr HIOKI 3532: Control Software for RLC meter HIOKI 3532.” 2018. Web. 15 Apr 2021.

Vancouver:

Slovák M. Obslužný SW pro RLC metr HIOKI 3532: Control Software for RLC meter HIOKI 3532. [Internet] [Thesis]. Brno University of Technology; 2018. [cited 2021 Apr 15]. Available from: http://hdl.handle.net/11012/2512.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Slovák M. Obslužný SW pro RLC metr HIOKI 3532: Control Software for RLC meter HIOKI 3532. [Thesis]. Brno University of Technology; 2018. Available from: http://hdl.handle.net/11012/2512

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

28. Kocová, Lucie. Návrh a realizace měření elektrických vlastností biologických tkání: Design and realzation of electric measurements on biological tissues.

Degree: 2019, Brno University of Technology

URL: http://hdl.handle.net/11012/26219

► This master’s thesis is focused on the electrical properties of biological tissues and flesh in particular. Their electrical characteristics depend on the physical and chemical… (more)

Subjects/Keywords: Biologická tkáň; elektrické vlastností tkání; impedance; Frickeův model; měření.; Biological tissue; electric properties of tissue; impedance; Fricke model; measurement.

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Kocová, L. (2019). Návrh a realizace měření elektrických vlastností biologických tkání: Design and realzation of electric measurements on biological tissues. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/26219

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Kocová, Lucie. “Návrh a realizace měření elektrických vlastností biologických tkání: Design and realzation of electric measurements on biological tissues.” 2019. Thesis, Brno University of Technology. Accessed April 15, 2021. http://hdl.handle.net/11012/26219.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Kocová, Lucie. “Návrh a realizace měření elektrických vlastností biologických tkání: Design and realzation of electric measurements on biological tissues.” 2019. Web. 15 Apr 2021.

Vancouver:

Kocová L. Návrh a realizace měření elektrických vlastností biologických tkání: Design and realzation of electric measurements on biological tissues. [Internet] [Thesis]. Brno University of Technology; 2019. [cited 2021 Apr 15]. Available from: http://hdl.handle.net/11012/26219.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Kocová L. Návrh a realizace měření elektrických vlastností biologických tkání: Design and realzation of electric measurements on biological tissues. [Thesis]. Brno University of Technology; 2019. Available from: http://hdl.handle.net/11012/26219

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

29. Slinták, Vlastimil. Realizace impedančního analyzátoru: Construction of an impedance analyzer.

Degree: 2019, Brno University of Technology

URL: http://hdl.handle.net/11012/26842

► The aim of this master’s thesis is to build stand-alone impedance analyzer for mesasuring antennas’ impedance. The vector network analysis is used as measuring method.… (more)

Subjects/Keywords: antény; atmega; impedance; měření; směrová odbočnice; obvodová analýza; antennas; atmega; directional coupler; impedance; measurement; network analysis

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Slinták, V. (2019). Realizace impedančního analyzátoru: Construction of an impedance analyzer. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/26842

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Slinták, Vlastimil. “Realizace impedančního analyzátoru: Construction of an impedance analyzer.” 2019. Thesis, Brno University of Technology. Accessed April 15, 2021. http://hdl.handle.net/11012/26842.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Slinták, Vlastimil. “Realizace impedančního analyzátoru: Construction of an impedance analyzer.” 2019. Web. 15 Apr 2021.

Vancouver:

Slinták V. Realizace impedančního analyzátoru: Construction of an impedance analyzer. [Internet] [Thesis]. Brno University of Technology; 2019. [cited 2021 Apr 15]. Available from: http://hdl.handle.net/11012/26842.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Slinták V. Realizace impedančního analyzátoru: Construction of an impedance analyzer. [Thesis]. Brno University of Technology; 2019. Available from: http://hdl.handle.net/11012/26842

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

30. Mikláš, Jan. Optoelektronický senzor stavu polarizace světla na biologických vzorcích: Optoelectronic sensor of polarization state of light from biological samples.

Degree: 2019, Brno University of Technology

URL: http://hdl.handle.net/11012/18602

► The living body tissues consist of cells which dimensions are bigger than a wavelength of visible light. Therefore a Mie scattering of reflected of backscaterred… (more)

Subjects/Keywords: Biologická tkáň; světlo; Mieův rozptyl; odraz; polarizace; impedance; měření.; Biological tissues; light; Mie scattering; reflexion; polarization; impedance; measurement.

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Mikláš, J. (2019). Optoelektronický senzor stavu polarizace světla na biologických vzorcích: Optoelectronic sensor of polarization state of light from biological samples. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/18602

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Mikláš, Jan. “Optoelektronický senzor stavu polarizace světla na biologických vzorcích: Optoelectronic sensor of polarization state of light from biological samples.” 2019. Thesis, Brno University of Technology. Accessed April 15, 2021. http://hdl.handle.net/11012/18602.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Mikláš, Jan. “Optoelektronický senzor stavu polarizace světla na biologických vzorcích: Optoelectronic sensor of polarization state of light from biological samples.” 2019. Web. 15 Apr 2021.

Vancouver:

Mikláš J. Optoelektronický senzor stavu polarizace světla na biologických vzorcích: Optoelectronic sensor of polarization state of light from biological samples. [Internet] [Thesis]. Brno University of Technology; 2019. [cited 2021 Apr 15]. Available from: http://hdl.handle.net/11012/18602.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Mikláš J. Optoelektronický senzor stavu polarizace světla na biologických vzorcích: Optoelectronic sensor of polarization state of light from biological samples. [Thesis]. Brno University of Technology; 2019. Available from: http://hdl.handle.net/11012/18602

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

		in
And / Or
		in
And / Or
		in
And / Or
		in

Open Access Theses and Dissertations