You searched for subject:(graphical user interface).
Showing records 1 – 30 of
235 total matches.
◁ [1] [2] [3] [4] [5] [6] [7] [8] ▶
University of Cincinnati
1.
SALGAONKAR, VASANT ANIL.
MANAGEMENT, ANALYSIS AND DISPLAY OF LOW SPEED DATA FOR LONG
TERM BRIDGE MONITORING BY CONSTRUCTING RECONFIGURABLE AND
CUSTOMIZABLE GRAPHICAL USER INTERFACES.
Degree: MS, Engineering : Electrical Engineering, 2007, University of Cincinnati
URL: http://rave.ohiolink.edu/etdc/view?acc_num=ucin1172676972 
► University of Cincinnati Infrastructure Institute (UCII) has been monitoring the structural health of highway bridges across Ohio for over a decade. The effects of traffic…
(more)
▼ University of Cincinnati Infrastructure Institute
(UCII) has been monitoring the structural health of highway bridges
across Ohio for over a decade. The effects of traffic and
environmental conditions on the bridge are studied by attaching
sensors at key locations on the structure. Strain gages are used to
measure forces induced in the bridge due to changes in the ambient
temperature. The effect of temperature induced strains on the
bridge manifests over a long period and hence, is called “Low Speed
Data”. Bridge instrumentation schemes developed at UCII are capable
of recording strain gage data automatically. The software package
created here will allow researchers at UCII to manage, analyze and
display this “Low Speed Data”. This software consists of a Matlab
based
graphical user interface (GUI) which will allow UCII
researchers to store the strain gage information into a MySQL
database using a simple point and click
interface. It will also
allow the UCII researchers to create web accessible interfaces.
These web interfaces can be customized to represent different
instrumentation schemes used for different bridges. This software
ensures that these modifications can be done in a facile manner
through simple drag and drop
interface implemented in Macromedia
Flash MX. This will enable the UCII researchers in efficient
deployment of web accessible GUI for end-users, like the Ohio
Department of Transportation (ODoT) officials and fellow structural
engineers. The web accessible GUIs so constructed will be secure,
easy to use and allow authorized end-users to view strain and
temperature history at various instrumented points on a bridge in
form of dynamically generated plots. This software can be
potentially extended in order to post process the acquired data and
automate the process of uploads to the database.
Advisors/Committee Members: Helmicki, Dr. Arthur (Advisor).
Subjects/Keywords: Graphical User Interface; Bridge Instrumentation
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share
❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
SALGAONKAR, V. A. (2007). MANAGEMENT, ANALYSIS AND DISPLAY OF LOW SPEED DATA FOR LONG
TERM BRIDGE MONITORING BY CONSTRUCTING RECONFIGURABLE AND
CUSTOMIZABLE GRAPHICAL USER INTERFACES. (Masters Thesis). University of Cincinnati. Retrieved from http://rave.ohiolink.edu/etdc/view?acc_num=ucin1172676972
Chicago Manual of Style (16th Edition):
SALGAONKAR, VASANT ANIL. “MANAGEMENT, ANALYSIS AND DISPLAY OF LOW SPEED DATA FOR LONG
TERM BRIDGE MONITORING BY CONSTRUCTING RECONFIGURABLE AND
CUSTOMIZABLE GRAPHICAL USER INTERFACES.” 2007. Masters Thesis, University of Cincinnati. Accessed October 24, 2019.
http://rave.ohiolink.edu/etdc/view?acc_num=ucin1172676972.
MLA Handbook (7th Edition):
SALGAONKAR, VASANT ANIL. “MANAGEMENT, ANALYSIS AND DISPLAY OF LOW SPEED DATA FOR LONG
TERM BRIDGE MONITORING BY CONSTRUCTING RECONFIGURABLE AND
CUSTOMIZABLE GRAPHICAL USER INTERFACES.” 2007. Web. 24 Oct 2019.
Vancouver:
SALGAONKAR VA. MANAGEMENT, ANALYSIS AND DISPLAY OF LOW SPEED DATA FOR LONG
TERM BRIDGE MONITORING BY CONSTRUCTING RECONFIGURABLE AND
CUSTOMIZABLE GRAPHICAL USER INTERFACES. [Internet] [Masters thesis]. University of Cincinnati; 2007. [cited 2019 Oct 24].
Available from: http://rave.ohiolink.edu/etdc/view?acc_num=ucin1172676972.
Council of Science Editors:
SALGAONKAR VA. MANAGEMENT, ANALYSIS AND DISPLAY OF LOW SPEED DATA FOR LONG
TERM BRIDGE MONITORING BY CONSTRUCTING RECONFIGURABLE AND
CUSTOMIZABLE GRAPHICAL USER INTERFACES. [Masters Thesis]. University of Cincinnati; 2007. Available from: http://rave.ohiolink.edu/etdc/view?acc_num=ucin1172676972
Virginia Tech
2.
Fortson, Samuel King.
Usability Engineering Applied to an Electromagnetic Modeling Tool.
Degree: MS, Geosciences, 2012, Virginia Tech
URL: http://hdl.handle.net/10919/33665
► There are very few software packages for model-building and visualization in electromagnetic geophysics, particularly when compared to other geophysical disciplines, such as seismology. The purpose…
(more)
▼ There are very few software packages for model-building and visualization in electromagnetic geophysics, particularly when compared to other geophysical disciplines, such as seismology. The purpose of this thesis is to design, develop, and test a geophysical model-building
interface that allows users to parameterize the 2D magnetotellurics problem. Through the evaluation of this
interface, feedback was collected from a usability specialist and a group of geophysics graduate students to study the steps users take to work through the 2D forward-modeling problem, and to analyze usability errors encountered while working with the
interface to gain a better understanding of how to build a more effective
interface. Similar work has been conducted on
interface design in other fields, such as medicine and consumer websites.
Usability Engineering is the application of a systematic set of methods to the design and development of software with the goal of making the software more learnable, easy to use, and accessible. Two different Usability Engineering techniques â Heuristic Evaluation and Thinking Aloud Protocol â were involved in the evaluation of the
interface designed in this study (FEM2DGUI). Heuristic Evaluation is a usability inspection method that employs a usability specialist to detect errors based on a known set of guidelines and personal experience. Thinking Aloud Protocol is a usability evaluation method where potential end-users are observed as they verbalize their every step as they work through specific scenarios with an
interface. These Usability Engineering methods were combined in a effort to understand how the first prototype of FEM2DGUI could be refined to make it more usable and to understand how end-users work through the forward-modeling problem.
The Usability Engineering methods employed in this project uncovered multiple usability errors that were corrected through a refinement of the
interface. Discovery of these errors helped with refining the system to become more robust and usable, which is believed to aid users in more efficient model-building. Because geophysical model-building is inherently a difficult task, it is possible that other model-building
graphical user interfaces could benefit from the application of Usability Engineering methods, such as those presented in this research.â
Advisors/Committee Members: Weiss, Chester J. (committeechair), King, Scott D. (committee member), Winchester, Woodrow W. III (committee member).
Subjects/Keywords: Usability Engineering; Graphical User Interface; Geophysics; Magnetotellurics
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share
❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Fortson, S. K. (2012). Usability Engineering Applied to an Electromagnetic Modeling Tool. (Masters Thesis). Virginia Tech. Retrieved from http://hdl.handle.net/10919/33665
Chicago Manual of Style (16th Edition):
Fortson, Samuel King. “Usability Engineering Applied to an Electromagnetic Modeling Tool.” 2012. Masters Thesis, Virginia Tech. Accessed October 24, 2019.
http://hdl.handle.net/10919/33665.
MLA Handbook (7th Edition):
Fortson, Samuel King. “Usability Engineering Applied to an Electromagnetic Modeling Tool.” 2012. Web. 24 Oct 2019.
Vancouver:
Fortson SK. Usability Engineering Applied to an Electromagnetic Modeling Tool. [Internet] [Masters thesis]. Virginia Tech; 2012. [cited 2019 Oct 24].
Available from: http://hdl.handle.net/10919/33665.
Council of Science Editors:
Fortson SK. Usability Engineering Applied to an Electromagnetic Modeling Tool. [Masters Thesis]. Virginia Tech; 2012. Available from: http://hdl.handle.net/10919/33665
Clemson University
3.
Mendel, Jeremy.
The Effect of Interface Consistency and Cognitive Load on User Performance in an Information Search Task.
Degree: MS, Applied Psychology, 2010, Clemson University
URL: https://tigerprints.clemson.edu/all_theses/1052
► Although interface consistency is theorized to increase performance and user satisfaction, previous research has found mixed and often non-significant results. The source of this discrepancy…
(more)
▼ Although
interface consistency is theorized to increase performance and
user satisfaction, previous research has found mixed and often non-significant results. The source of this discrepancy may be due to varying levels of task difficulty employed in these past studies. This study attempted to control the task difficulty using cognitive load theory.
Interface consistency was manipulated along with intrinsic cognitive load and extraneous cognitive load.
Interface consistency was manipulated along three dimensions: physical, communicational and conceptual. Intrinsic cognitive load was manipulated by asking participants finance (high load) questions and travel (low load) questions. Unnecessary and irrelevant extra hyperlinks were used to manipulate extraneous cognitive load. These hyperlinks were either present (high load) or absent (low load) in the websites. Forty eight participants searched for answers to 24 questions across four separate websites. Results indicated interactions between consistency and the two types of cognitive load. These interactions suggest that the effects of consistency are dependent upon the difficulty of the task. Specifically, consistency may be especially important for difficult tasks with high cognitive load.
Advisors/Committee Members: Pak, Richard, Gugerty , Leo, Thatcher , Jason.
Subjects/Keywords: Cognitive Load; Graphical User Interface; Interface Consistency; Interface Design; Cognitive Psychology
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share
❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Mendel, J. (2010). The Effect of Interface Consistency and Cognitive Load on User Performance in an Information Search Task. (Masters Thesis). Clemson University. Retrieved from https://tigerprints.clemson.edu/all_theses/1052
Chicago Manual of Style (16th Edition):
Mendel, Jeremy. “The Effect of Interface Consistency and Cognitive Load on User Performance in an Information Search Task.” 2010. Masters Thesis, Clemson University. Accessed October 24, 2019.
https://tigerprints.clemson.edu/all_theses/1052.
MLA Handbook (7th Edition):
Mendel, Jeremy. “The Effect of Interface Consistency and Cognitive Load on User Performance in an Information Search Task.” 2010. Web. 24 Oct 2019.
Vancouver:
Mendel J. The Effect of Interface Consistency and Cognitive Load on User Performance in an Information Search Task. [Internet] [Masters thesis]. Clemson University; 2010. [cited 2019 Oct 24].
Available from: https://tigerprints.clemson.edu/all_theses/1052.
Council of Science Editors:
Mendel J. The Effect of Interface Consistency and Cognitive Load on User Performance in an Information Search Task. [Masters Thesis]. Clemson University; 2010. Available from: https://tigerprints.clemson.edu/all_theses/1052
Rochester Institute of Technology
4.
Dunn, Ryan M.
Remote Access and Computerized User Control of Robotic Micromanipulators.
Degree: MS, Mechanical Engineering, 2016, Rochester Institute of Technology
URL: https://scholarworks.rit.edu/theses/9220
► Nano- and micromanipulators are critical research tools in numerous fields including micro-manufacturing and disease study. Despite their importance, nano- and micromanipulation systems remain inaccessible…
(more)
▼ Nano- and micromanipulators are critical research tools in numerous fields including micro-manufacturing and disease study. Despite their importance, nano- and micromanipulation systems remain inaccessible to many groups due to price and lack of portability. An intuitive and remotely accessible manipulation system helps mitigate this access problem. Previously, optimal control hardware for single-probe manipulation and the effect of latency on
user performance were not well understood. Remote access demands full computerization;
graphical user interfaces with networking capabilities were developed to fulfill this requirement and allow the use of numerous hardware controllers. Virtual environments were created to simulate the use of a manipulator with full parametric control and measurement capabilities. Users completed simulated tasks with each device and were surveyed about their perceptions.
User performance with a commercial manipulator controller was exceeded by performance with both a computer mouse and pen tablet. Latency was imposed within the virtual environment to study it’s effects and establish guidelines as to which latency ranges are acceptable for long-range remote manipulation.
User performance began to degrade noticeably at 100 ms and severely at 400 ms and performance with the mouse degraded the least as latency increased. A computer vision system for analyzing carbon nanotube arrays was developed so the computation time could be compared to acceptable system latency. The system characterizes the arrays to a high degree of accuracy and most of the measurement types of obtainable fast enough for real-time analysis.
Advisors/Committee Members: Michael Schrlau, Kathleen Lamkin-Kennard, Mark Kempski.
Subjects/Keywords: Automation; Computer vision; Graphical user interface; Human-computer interface; Latency; Micromanipulation
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share
❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Dunn, R. M. (2016). Remote Access and Computerized User Control of Robotic Micromanipulators. (Masters Thesis). Rochester Institute of Technology. Retrieved from https://scholarworks.rit.edu/theses/9220
Chicago Manual of Style (16th Edition):
Dunn, Ryan M. “Remote Access and Computerized User Control of Robotic Micromanipulators.” 2016. Masters Thesis, Rochester Institute of Technology. Accessed October 24, 2019.
https://scholarworks.rit.edu/theses/9220.
MLA Handbook (7th Edition):
Dunn, Ryan M. “Remote Access and Computerized User Control of Robotic Micromanipulators.” 2016. Web. 24 Oct 2019.
Vancouver:
Dunn RM. Remote Access and Computerized User Control of Robotic Micromanipulators. [Internet] [Masters thesis]. Rochester Institute of Technology; 2016. [cited 2019 Oct 24].
Available from: https://scholarworks.rit.edu/theses/9220.
Council of Science Editors:
Dunn RM. Remote Access and Computerized User Control of Robotic Micromanipulators. [Masters Thesis]. Rochester Institute of Technology; 2016. Available from: https://scholarworks.rit.edu/theses/9220
Kansas State University
5.
Hoag, Matthew.
Revitalizing
eXene.
Degree: MS, Department of Computing and
Information Sciences, 2009, Kansas State University
URL: http://hdl.handle.net/2097/1664
► This thesis covers the process leading up to the release of eXene 2.0, a User Interface Management System (UIMS) toolkit. Since its inception, eXene has…
(more)
▼ This thesis covers the process leading up to the release
of eXene 2.0, a
User Interface Management System (UIMS) toolkit.
Since its inception, eXene has provided a unique way to create
meaningful
graphical user interfaces (GUIs) for Standard ML
applications. Additionally, it has gone through several quality
revisions which have both enhanced the toolkit and corrected many
deficiencies that were present. Even with these improvements,
however, the full potential of eXene has become increasingly
difficult for developers to utilize. That is, in spite of the
natural innovation that eXene brings to GUI construction, its
current lack of extensibility, usability, and functionality has
caused Standard ML developers to choose simpler, more familiar UIMS
toolkits, despite their limitations, for the creation of their
applications. In light of this fact, eXene needs an internal and
cosmetic overhaul to extend its usage and appeal. First, to improve
its extensibility, formerly weakened by organic growth, eXene
requires some restructuring of its architecture. Second, to improve
its overall usability, previously stifled by sparse documentation,
eXene requires the implementation of an interactive electronic
document for its API. Finally, to improve its functionality,
several new multi-purpose widgets need to be introduced. It is the
author's hypothesis that the revised structure, improved
documentation, and additional multi-purpose widgets detailed in
this thesis sufficiently elevate eXene's extensibility, usability,
and functionality such that eXene can be considered a fully
featured UIMS toolkit. With these changes and the release of eXene
2.0, eXene is more likely to be adopted as the primary UIMS toolkit
for Standard ML developers.
Advisors/Committee Members: Alley Stoughton.
Subjects/Keywords: eXene; Graphical user
interface; User interface
management system toolkit; Computer Science (0984)
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share
❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Hoag, M. (2009). Revitalizing
eXene. (Masters Thesis). Kansas State University. Retrieved from http://hdl.handle.net/2097/1664
Chicago Manual of Style (16th Edition):
Hoag, Matthew. “Revitalizing
eXene.” 2009. Masters Thesis, Kansas State University. Accessed October 24, 2019.
http://hdl.handle.net/2097/1664.
MLA Handbook (7th Edition):
Hoag, Matthew. “Revitalizing
eXene.” 2009. Web. 24 Oct 2019.
Vancouver:
Hoag M. Revitalizing
eXene. [Internet] [Masters thesis]. Kansas State University; 2009. [cited 2019 Oct 24].
Available from: http://hdl.handle.net/2097/1664.
Council of Science Editors:
Hoag M. Revitalizing
eXene. [Masters Thesis]. Kansas State University; 2009. Available from: http://hdl.handle.net/2097/1664
6.
Habib, Ali.
Påtagliga användargränssnitt för kapacitiva pekskärmar utan modifiering av enhet.
Degree: Design and Engineering, 2016, Mälardalen University
URL: http://urn.kb.se/resolve?urn=urn:nbn:se:mdh:diva-32553
► Musik-applikationen c3n play används på surfplattor och mobiltelefoner som har den kapacitiva pekskärmstypen. I dagsläget kan musik-applikationen enbart styras med fingrarna. Spelpjäser, utvecklades för…
(more)
▼ Musik-applikationen c3n play används på surfplattor och mobiltelefoner som har den kapacitiva pekskärmstypen. I dagsläget kan musik-applikationen enbart styras med fingrarna. Spelpjäser, utvecklades för att målgruppen skulle kunna kombinera fingerinmatning med något fysiskt och för att underlätta spelandet. En konvergerande produktutvecklingsprocess innefattande faser och aktiviteter tillämpades. Inledningsvis genomfördes en detaljerad informationsinsamling som grund för det fortsatta arbetet. Analys av konkurrenternas produkter och en benchmarking implementerades, för att både identifiera kraven som ställts på produkten och upprätta en kravspecifikation. Spelpjäsen delades in i tre delar: formen på hela spelpjäsen, mönster som gör att användarna kan identifiera varje spelpjäs och mönster på undersidan som programvaran kunde identifiera. Därefter genererades flera idéer på formen av spelpjäsen, vilka utvärderades med hänsyn till de uppsatta kraven. Idéer som ansågs uppfylla kraven bäst gick vidare till konceptgenereringsfasen, där fem olika förslag kunde visualiseras i skisser och CAD-modeller (Computer Aidid Design). Koncepten utvärderades och förbättrades för att tillfredsställa användarnas behov och förväntningar. Det slutliga konceptet på formen gjordes i fyra olika varianter, vilka framställdes som prototyper för vidare test av målgruppen. Konceptlösningar på spelpjäsens identifieringsmönster av användaren analyserades för att passa in i c3n play-användargränssnitten. Tekniken för att identifiera spelpjäsen mot den kapacitiva pekskärmstypen utvecklades via tester, där avstånd och vinklar på kontaktpunkterna bestämdes. Viktiga produktutvecklingsverktyg implementerades för att säkerställa såväl spelpjäsernas hållbarhet som miljövänlighet, med hänsyn till produktlivscykel, tillverkning, montering och tillförlitlighet samt kostnadsmedvetenhet. Därefter valdes lämpliga material samt en lämplig tillverkningsmetod. Detta resulterade i en produktfamilj bestående av åtta stycken spelpjäser som ändrar på var sin funktion i c3n play-applikationen. En spelpjäs som förändrar amplitud, resonans, högtpassfilter, lågt-passfilter, delay, zoom + pan, kompression och feedback.
The application c3n play can be used on tablets and mobile phones that have capacitive multi touchscreens. The application can only be controlled by using the finger input. Tangible user interface was developed so the target group can use something physically “checkers” in a combination with the finger input. A product development process comprising phases and activities was implemented. Initially a detailed information collection were conducted and used as underlying to the continued work. Competitors’ products were analyzed and a benchmarking was implemented to identify user needs and to be able to make a target specification. Checkers was divided in three parts, shape of the whole checker, pattern so users can identify every checker and a pattern on the bottom so the software can identify the checkers on the screen. After that ideas were…
Subjects/Keywords: tangible user interface; capacitive multitouch; capacitive; graphical user interface; capacitve screen; påtagliga användargränssnitt
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share
❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Habib, A. (2016). Påtagliga användargränssnitt för kapacitiva pekskärmar utan modifiering av enhet. (Thesis). Mälardalen University. Retrieved from http://urn.kb.se/resolve?urn=urn:nbn:se:mdh:diva-32553
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Chicago Manual of Style (16th Edition):
Habib, Ali. “Påtagliga användargränssnitt för kapacitiva pekskärmar utan modifiering av enhet.” 2016. Thesis, Mälardalen University. Accessed October 24, 2019.
http://urn.kb.se/resolve?urn=urn:nbn:se:mdh:diva-32553.
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
MLA Handbook (7th Edition):
Habib, Ali. “Påtagliga användargränssnitt för kapacitiva pekskärmar utan modifiering av enhet.” 2016. Web. 24 Oct 2019.
Vancouver:
Habib A. Påtagliga användargränssnitt för kapacitiva pekskärmar utan modifiering av enhet. [Internet] [Thesis]. Mälardalen University; 2016. [cited 2019 Oct 24].
Available from: http://urn.kb.se/resolve?urn=urn:nbn:se:mdh:diva-32553.
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Council of Science Editors:
Habib A. Påtagliga användargränssnitt för kapacitiva pekskärmar utan modifiering av enhet. [Thesis]. Mälardalen University; 2016. Available from: http://urn.kb.se/resolve?urn=urn:nbn:se:mdh:diva-32553
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Kaunas University of Technology
7.
Jankauskaitė,
Lina; Karlonas,
Tadas.
Grafinės vartotojo sąsajos generavimas naudojant
UML diagramas.
Degree: Master, Informatics
Engineering, 2010, Kaunas University of Technology
URL: http://vddb.laba.lt/obj/LT-eLABa-0001:E.02~2010~D_20100813_110640-22147
;
► Šio darbo tikslas - pagreitinti ir palengvinti informacijos sistemų kūrimo procesą, sukuriant grafinės vartotojo sąsajos prototipo generavimo iš UML diagramų algoritmą. Darbe išanalizuota informacinių sistemų…
(more)
▼ Šio darbo tikslas - pagreitinti ir
palengvinti informacijos sistemų kūrimo procesą, sukuriant grafinės
vartotojo sąsajos prototipo generavimo iš UML diagramų algoritmą.
Darbe išanalizuota informacinių sistemų kūrimo aplinka, jos
vartotojai, grafinės vartotojo sąsajos sudarymo metodai bei
grafiniai elementai, taip pat – UML diagramos bei jų sąryšis su
grafine vartotojo sąsaja. Pagal atliktą analizę bei išsikeltus
kokybės kriterijus, sukurtas algoritmas, generuojantis grafinę
vartotojo sąsają iš panaudojimo atvejų, klasių ir veiklos diagramų.
Grafinės vartotojo sąsajos algoritmas realizuotas Java programavimo
kalba kaip atskira programa, kuri naudoja informaciją, gautą iš
MagicDraw UML įrankiu sukurto XML projekto failo. Grafinė vartotojo
sąsaja gali būti sugeneruojama dviem tipais – aplikacijai ir
internetinei sąsajai. Pažymėtina, kad naudojantis sukurtu įrankiu,
grafinė sąsaja gali būti ne tik sudaroma, bet ir visapusiškai
redaguojama. Taip pat sugeneruojamas aplikacijos (Java programavimo
kalba) bei internetinės sąsajos (HTML) programinis kodas. Sukurtas
grafinės vartotojo sąsajos generavimo įrankis išbandytas kuriant
įvairaus sudėtingumo informacijos sistemų grafines sąsajas.
Nustatyta, kad grafinės vartotojo sąsajos įrankį verta naudoti
neatsižvelgiant į sistemų sudėtingumą. Šio darbo tema buvo
parašytas straipsnis, kuris pristatytas 15-oje tarpuniversitetinėje
magistrantų ir doktorantų konferencijoje „Informacinė visuomenė ir
universitetinės studijos (IVUS 2010)“.
The aim of this work is to accelerate and
facilitate the process of information system development by
creating the algorithm for GUI (graphical user interface) prototype
generation from UML diagrams. The work analyses the environment of
information system development, its users, creation methods and
graphical elements of graphical user interface, as well as UML
diagrams and their links to graphical user interface. The algorithm
that generates graphical user interface from the use case, class
and activity diagrams was created in accordance to the performed
analysis and determined quality criteria. The algorithm of
graphical user interface was realised with the Java programming
language as a separate program that uses information received from
XML project file created by the MagicDraw UML tool. There are two
types of graphical user interface generation: for application and
for internet interface. It has to be noted that the created tool
can be used not only for creation but also for thorough editing of
the interface. Besides, a program code for application (Java
programming language) and internet interface (HTML) is generated.
The created tool for graphical user interface generation is tested
by creating graphical interfaces for information systems of various
complexity. It has been found that the graphical user interface
tool is worth being used in all cases. An article on the theme of
this work has been written and presented in the 15th
inter-university conference for Master... [to full
text]
Advisors/Committee Members: Stulpinas, Raimundas (Master’s degree committee chair), Butkienė, Rita (Master’s degree session secretary), Butleris, Rimantas (Master’s degree committee member), Gudas, Saulius (Master’s degree committee member), Pilkauskas, Vytautas (Master’s degree committee member), Lopata, Audrius (Master’s degree committee member), Jusas, Vacius (Master’s degree committee member), Čeponis, Jonas (Master’s thesis reviewer), Butkienė, Rita (Master’s thesis supervisor).
Subjects/Keywords: UML diagramos; Vartotojo
sąsaja; Generavimas; UML diagrams; Graphical user
interface; Generation
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share
❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Karlonas,
Tadas, J
Lina;. (2010). Grafinės vartotojo sąsajos generavimas naudojant
UML diagramas. (Masters Thesis). Kaunas University of Technology. Retrieved from http://vddb.laba.lt/obj/LT-eLABa-0001:E.02~2010~D_20100813_110640-22147 ;
Chicago Manual of Style (16th Edition):
Karlonas,
Tadas, Jankauskaitė,
Lina;. “Grafinės vartotojo sąsajos generavimas naudojant
UML diagramas.” 2010. Masters Thesis, Kaunas University of Technology. Accessed October 24, 2019.
http://vddb.laba.lt/obj/LT-eLABa-0001:E.02~2010~D_20100813_110640-22147 ;.
MLA Handbook (7th Edition):
Karlonas,
Tadas, Jankauskaitė,
Lina;. “Grafinės vartotojo sąsajos generavimas naudojant
UML diagramas.” 2010. Web. 24 Oct 2019.
Vancouver:
Karlonas,
Tadas J
Lina;. Grafinės vartotojo sąsajos generavimas naudojant
UML diagramas. [Internet] [Masters thesis]. Kaunas University of Technology; 2010. [cited 2019 Oct 24].
Available from: http://vddb.laba.lt/obj/LT-eLABa-0001:E.02~2010~D_20100813_110640-22147 ;.
Council of Science Editors:
Karlonas,
Tadas J
Lina;. Grafinės vartotojo sąsajos generavimas naudojant
UML diagramas. [Masters Thesis]. Kaunas University of Technology; 2010. Available from: http://vddb.laba.lt/obj/LT-eLABa-0001:E.02~2010~D_20100813_110640-22147 ;
California State University – Sacramento
8.
Ahuja, Saurabh.
Zigbee based web enabled power monitor.
Degree: MS, Electrical and Electronic Engineering, 2011, California State University – Sacramento
URL: http://hdl.handle.net/10211.9/918
► In this high-tech world, there are hundreds of mechanical machines and electronic products being introduced in market, on weekly basis, to increase the comfort level…
(more)
▼ In this high-tech world, there are hundreds of mechanical machines and electronic products being introduced in market, on weekly basis, to increase the comfort level of human beings. However, to operate on these devices, more power is required. More power generation means more energy requirement and so energy resources. However, today world is facing critical energy resource shortage and "Green House Effect" problems. There are bunch of research projects going on to reduce the total power consumption and at the same time maximize energy/power efficiency.
So this project is done as an effort to address the above issue- maximizing the power efficiency and minimizing the power usage. Aim of this project is to control and monitor the power usage of the devices with the help of low-cost, low-power technology known as Zigbee Technology.This project also focuses on developing a
Graphical User Interface through which one can control and monitor the power usage of different devices. The
graphical user interface give commands to embedded board using Zigbee wireless technology, which in turn controls the switching ON or OFF of different devices.
Overall project can be divided into two modules Power Measurement Embedded module and Home server Module. Power Measurement Embedded Module contains power measurement circuit, Microprocessor Control Unit and Zigbee Transceiver. On the other hand, Home Server Module contains Zigbee Transceiver and module through which one can send commands. This project focuses on the Home Server module in which one can send commands to control the devices as well monitor the power consumed by the devices.
This project also includes a webpage development through which one can monitor and compare the power consumed by the devices in a tabular form as well as in a chart. This
user-friendly representation of the data allows
user to understand the power consumption by the devices easily and effectively.
Advisors/Committee Members: Pang, Jing.
Subjects/Keywords: Controlling of devices using graphical user interface; Wireless; Home automation
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share
❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Ahuja, S. (2011). Zigbee based web enabled power monitor. (Masters Thesis). California State University – Sacramento. Retrieved from http://hdl.handle.net/10211.9/918
Chicago Manual of Style (16th Edition):
Ahuja, Saurabh. “Zigbee based web enabled power monitor.” 2011. Masters Thesis, California State University – Sacramento. Accessed October 24, 2019.
http://hdl.handle.net/10211.9/918.
MLA Handbook (7th Edition):
Ahuja, Saurabh. “Zigbee based web enabled power monitor.” 2011. Web. 24 Oct 2019.
Vancouver:
Ahuja S. Zigbee based web enabled power monitor. [Internet] [Masters thesis]. California State University – Sacramento; 2011. [cited 2019 Oct 24].
Available from: http://hdl.handle.net/10211.9/918.
Council of Science Editors:
Ahuja S. Zigbee based web enabled power monitor. [Masters Thesis]. California State University – Sacramento; 2011. Available from: http://hdl.handle.net/10211.9/918
Miami University
9.
Lee, Hoseong Asher.
VISUALIZATION OF 3D OPTICAL LATTICES AND GRAPHICAL USER
INTERFACE SOFTWARE DEVELOPMENT.
Degree: MS, Physics, 2016, Miami University
URL: http://rave.ohiolink.edu/etdc/view?acc_num=miami1477182264099575
► We describe the visualization of 3D optical lattices based on Sisyphus cooling implemented with open source software. As a main framework to build the simulation…
(more)
▼ We describe the visualization of 3D optical lattices
based on Sisyphus cooling implemented with open source software. As
a main framework to build the simulation software, we utilized
Python and its open source libraries, such as Numpy, Scipy,
TkInter, and QuTiP. Along with the computational and simulational
part, the software comes up with a
graphical user interface (GUI).
Thus, we expect researchers without programming background can
easily access the software and utilize it for guiding their
experimental implementations of optical lattices. The software has
been published to a Github repository
(https://github.com/ohpyupi/3d-optical-lattice). Utilizing the
software, we plot the adiabatic light shift potentials found by
diagonalizing the effective Hamiltonian for the light shift
operator. Our program incorporates a variety of atomic ground state
configurations with total angular momentum ranging from J=½ to J =
4 and a variety of laser beam configurations including the two-beam
lin¿lin configuration, the four-beam umbrella configuration, and
four beams propagating in two orthogonal planes. In addition to
visualizing the lattice, the program also evaluates lattice
parameters such as the vibrational frequency for atoms trapped deep
in the wells.
Advisors/Committee Members: Clemens, James (Advisor).
Subjects/Keywords: Physics; 3D optical lattice; graphical user interface simulation software
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share
❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Lee, H. A. (2016). VISUALIZATION OF 3D OPTICAL LATTICES AND GRAPHICAL USER
INTERFACE SOFTWARE DEVELOPMENT. (Masters Thesis). Miami University. Retrieved from http://rave.ohiolink.edu/etdc/view?acc_num=miami1477182264099575
Chicago Manual of Style (16th Edition):
Lee, Hoseong Asher. “VISUALIZATION OF 3D OPTICAL LATTICES AND GRAPHICAL USER
INTERFACE SOFTWARE DEVELOPMENT.” 2016. Masters Thesis, Miami University. Accessed October 24, 2019.
http://rave.ohiolink.edu/etdc/view?acc_num=miami1477182264099575.
MLA Handbook (7th Edition):
Lee, Hoseong Asher. “VISUALIZATION OF 3D OPTICAL LATTICES AND GRAPHICAL USER
INTERFACE SOFTWARE DEVELOPMENT.” 2016. Web. 24 Oct 2019.
Vancouver:
Lee HA. VISUALIZATION OF 3D OPTICAL LATTICES AND GRAPHICAL USER
INTERFACE SOFTWARE DEVELOPMENT. [Internet] [Masters thesis]. Miami University; 2016. [cited 2019 Oct 24].
Available from: http://rave.ohiolink.edu/etdc/view?acc_num=miami1477182264099575.
Council of Science Editors:
Lee HA. VISUALIZATION OF 3D OPTICAL LATTICES AND GRAPHICAL USER
INTERFACE SOFTWARE DEVELOPMENT. [Masters Thesis]. Miami University; 2016. Available from: http://rave.ohiolink.edu/etdc/view?acc_num=miami1477182264099575
NSYSU
10.
Chang, Wen-Chi.
A Visual Programming Editor for Industrial Robots.
Degree: Master, Electrical Engineering, 2017, NSYSU
URL: http://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0619117-153441
► A graphical programming language can significantly relax the effort in learning programming languages for the beginners, compared with the normal programming language. Blockly is a…
(more)
▼ A
graphical programming language can significantly relax the effort in learning programming languages for the beginners, compared with the normal programming language. Blockly is a building-block oriented programming language so as that learners drag the building blocks to complete programs in the editing process, instead of hand coding. It can reduce a lot of difficulties for users not familiar with program syntax and allow them to get started easily and quickly. Lua is an embeddable extended scripting language. It is the smallest and fastest one in all scripting languages, hence it is best for embedding in programs of the applications. In this thesis, through the combination of Google's Blockly modules, Lua, and robot control language software produced by ITRI , a
user can drag and place building blocks to complete programming codes in terms of graphic
user interface. The interpreted codes send commands and data to a robot controller to manipulate the robot/via the internet. Experiments have been conducted to impose the proposed application on a six degree-of-freedom industrial robot manufactured by a research institute.
Advisors/Committee Members: Kao-Shing Hwang (committee member), Tzuu-Hseng S. Li (chair), Ming-Yi Ju (chair), Ching-Chih Tsai (chair), Yu-Jen Chen (chair).
Subjects/Keywords: Block-oriented; Graphical user interface; Script language; Lua; Blcokly
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share
❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Chang, W. (2017). A Visual Programming Editor for Industrial Robots. (Thesis). NSYSU. Retrieved from http://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0619117-153441
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Chicago Manual of Style (16th Edition):
Chang, Wen-Chi. “A Visual Programming Editor for Industrial Robots.” 2017. Thesis, NSYSU. Accessed October 24, 2019.
http://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0619117-153441.
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
MLA Handbook (7th Edition):
Chang, Wen-Chi. “A Visual Programming Editor for Industrial Robots.” 2017. Web. 24 Oct 2019.
Vancouver:
Chang W. A Visual Programming Editor for Industrial Robots. [Internet] [Thesis]. NSYSU; 2017. [cited 2019 Oct 24].
Available from: http://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0619117-153441.
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Council of Science Editors:
Chang W. A Visual Programming Editor for Industrial Robots. [Thesis]. NSYSU; 2017. Available from: http://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0619117-153441
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
University of Washington
11.
Chen, Ya-Shin.
Graphical User Interface for Cleft Severity Analysis.
Degree: 2017, University of Washington
URL: http://hdl.handle.net/1773/38113
► 3D FAST (3D Facial Analysis System and Tool) is a graphical user interface (GUI) designed for analyzing craniofacial symmetry, particularly for cleft severity. The goal…
(more)
▼ 3D FAST (3D Facial Analysis System and Tool) is a
graphical user interface (GUI) designed for analyzing craniofacial symmetry, particularly for cleft severity. The goal is to enable an easy experience for computing the extent of symmetry in the face in batch mode, and examining and editing individual images as well. The GUI was designed to have a
user-friendly
interface, in order to be straightforward to operate for users with little or no technological background. The decision of using common components, such as drop-down menus that are familiar to people, was made during early design phase. All of the components of the GUI were built with JAVA Swing and the VTK Library.
Advisors/Committee Members: Shapiro, Linda G (advisor).
Subjects/Keywords: Cleft; Graphical User Interface; GUI; Electrical engineering; Computer engineering; electrical engineering
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share
❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Chen, Y. (2017). Graphical User Interface for Cleft Severity Analysis. (Thesis). University of Washington. Retrieved from http://hdl.handle.net/1773/38113
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Chicago Manual of Style (16th Edition):
Chen, Ya-Shin. “Graphical User Interface for Cleft Severity Analysis.” 2017. Thesis, University of Washington. Accessed October 24, 2019.
http://hdl.handle.net/1773/38113.
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
MLA Handbook (7th Edition):
Chen, Ya-Shin. “Graphical User Interface for Cleft Severity Analysis.” 2017. Web. 24 Oct 2019.
Vancouver:
Chen Y. Graphical User Interface for Cleft Severity Analysis. [Internet] [Thesis]. University of Washington; 2017. [cited 2019 Oct 24].
Available from: http://hdl.handle.net/1773/38113.
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Council of Science Editors:
Chen Y. Graphical User Interface for Cleft Severity Analysis. [Thesis]. University of Washington; 2017. Available from: http://hdl.handle.net/1773/38113
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Massey University
12.
Roxas, Joy.
Refining 'State of the art' : graphical user interface redesign for Gallagher's existing digital product - the "TSi": Master of Design exegesis
.
Degree: 2014, Massey University
URL: http://hdl.handle.net/10179/5436
► This design research project proposes a new and improved touch screen graphical user interface (GUI) for Gallagher’s on farm animal management product - the “TSi”.…
(more)
▼ This design research project proposes a new and improved touch
screen graphical user interface (GUI) for Gallagher’s on farm animal
management product - the “TSi”. The re-design concept aims
to develop appropriate design aesthetic treatments, as a
foundation for a more attractive, intuitive, easy to use graphical
user interface. The intention is to encourage farmers and farm
workers to readily engage and exploit the full performance
capability of the TSi and to reduce the perceived stigmatism of
learning specialist software that requires adopting to new
technologies. The design research propose that a GUI enhances the
end user experience to create a more desirable and usable product
by introducing User Interface (UI) elements and utilising common
user scenarios. The research has incorporated end user feedback
and co-creative development process with the Gallagher product
development and marketing team.
The TSi is a revolutionary weigh scale device that allows users to
instantly record and access data on individual animals and groups
of animals. This allows farmer’s to critically assess livestock
performance and enable strategic farm management decisions - in
the office, in the yard or elsewhere on the farm. The redesign begins
with a thorough critical analysis of the TSi’s existing GUI,
identifying issues involved with information and visual hierarchy of
elements such as navigation, buttons, text and graphical icons.
The methods and processes used include user observation, rapid
prototyping and mind-mapping user journeys through a series of
workshops done at Gallagher headquarters (Hamilton) and
Massey University (Wellington). These are tested methods and
processes used within the field of Human Computer Interaction
and User Experience design advocated by academics and theorists
such as Don Norman, Jakob Nielsen, Jesse James Garrett and
Bill Moggridge.
Subjects/Keywords: Graphical user interface (GUI) design;
Farm management computer program
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share
❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Roxas, J. (2014). Refining 'State of the art' : graphical user interface redesign for Gallagher's existing digital product - the "TSi": Master of Design exegesis
. (Thesis). Massey University. Retrieved from http://hdl.handle.net/10179/5436
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Chicago Manual of Style (16th Edition):
Roxas, Joy. “Refining 'State of the art' : graphical user interface redesign for Gallagher's existing digital product - the "TSi": Master of Design exegesis
.” 2014. Thesis, Massey University. Accessed October 24, 2019.
http://hdl.handle.net/10179/5436.
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
MLA Handbook (7th Edition):
Roxas, Joy. “Refining 'State of the art' : graphical user interface redesign for Gallagher's existing digital product - the "TSi": Master of Design exegesis
.” 2014. Web. 24 Oct 2019.
Vancouver:
Roxas J. Refining 'State of the art' : graphical user interface redesign for Gallagher's existing digital product - the "TSi": Master of Design exegesis
. [Internet] [Thesis]. Massey University; 2014. [cited 2019 Oct 24].
Available from: http://hdl.handle.net/10179/5436.
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Council of Science Editors:
Roxas J. Refining 'State of the art' : graphical user interface redesign for Gallagher's existing digital product - the "TSi": Master of Design exegesis
. [Thesis]. Massey University; 2014. Available from: http://hdl.handle.net/10179/5436
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Boston University
13.
Woodard, Jon Lenley.
Graphical user interface framework for Earlab.
Degree: MS, Biomedical Engineering, 2012, Boston University
URL: http://hdl.handle.net/2144/32069
► The Earlab Project at Boston University Hearing Research Center (HRC), http://earlab.bu.edu, is a computational simulation system created by the HRC to allow researchers to run…
(more)
▼ The Earlab Project at Boston University Hearing Research Center (HRC), http://earlab.bu.edu, is a computational simulation system created by the HRC to allow researchers to run simulations efficiently, using software representations of physiological pathways. The existing complexity of Earlab presents difficulty for users who may wish to adjust the parameters necessary to change from models of the ear to models that simulate other physiological pathways. To address this difficulty, several approaches were explored to assist in formulating a new framework for editing files associated with Earlab. XML, a mark-up language, was used to derive a series of prototype XML based documents as replacements for existing Earlab files. Microsoft Visual Studio and C# was then used to create a prototype of a graphical user interface that is capable of displaying an XML based document in a visual manner. The resulting framework shows the process of the intake of an XML document of an sample Earlab model, the presentation of the model in a graphical framework and the ability to edit the model and receive feedback on the suitability of values in the model.
Subjects/Keywords: Boston University Hearing Research Center; Graphical user interface; Computer science
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share
❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Woodard, J. L. (2012). Graphical user interface framework for Earlab. (Masters Thesis). Boston University. Retrieved from http://hdl.handle.net/2144/32069
Chicago Manual of Style (16th Edition):
Woodard, Jon Lenley. “Graphical user interface framework for Earlab.” 2012. Masters Thesis, Boston University. Accessed October 24, 2019.
http://hdl.handle.net/2144/32069.
MLA Handbook (7th Edition):
Woodard, Jon Lenley. “Graphical user interface framework for Earlab.” 2012. Web. 24 Oct 2019.
Vancouver:
Woodard JL. Graphical user interface framework for Earlab. [Internet] [Masters thesis]. Boston University; 2012. [cited 2019 Oct 24].
Available from: http://hdl.handle.net/2144/32069.
Council of Science Editors:
Woodard JL. Graphical user interface framework for Earlab. [Masters Thesis]. Boston University; 2012. Available from: http://hdl.handle.net/2144/32069
Kansas State University
14.
Ayyagari, Pavani.
A
visualization framework for patient data and its
environment.
Degree: MS, Department of Computing and
Information Sciences, 2010, Kansas State University
URL: http://hdl.handle.net/2097/4256
► A Health Care System is targeted to provide well-monitored patient care. ‘A Visualization Framework for Patient data and its environment’ offers a broad portfolio of…
(more)
▼ A Health Care System is targeted to provide
well-monitored patient care. ‘A Visualization Framework for Patient
data and its environment’ offers a broad portfolio of patient
monitoring to help and improve patient care.
‘A Visualization
Framework for Patient data and its environment’ is an application
to monitor and analyze any patient’s activity visually through a
period of time in conjunction with the surroundings aspects like
the room temperature, status of lights in the room, etc. in a
healthcare system. A set of sensors equipped with each patient
record data, pertaining to the patient’s movement and location in
addition to a few other sensor values like temperature and light
sensors for recording the room temperature, status of lights in the
room respectively. On accepting the activity time bounds as the
input, the application retrieves the appropriate values from the
database and displays the patient position as a continuous stream
of images in association with a slider along with the temperature
values. A floor map of the hospital, similar to a blueprint model,
is portrayed along with
graphical display of lights, in conjunction
with the slider. The patient locations are depicted on the map by
minute icons with a patient id associated with the each of the
icons for identification purposes. Individual window frames for
each patient, displaying a patient’s position, enable the
user to
customize monitoring to specific patients at any instance of time
and thus keep track of every move of the patient over a considerate
period of time. The locations of the patients on the map, the
lights in the rooms depicted on the floor map, the patient position
in the individual windows and the temperature are all in
synchronization with the slider whose movement is a function of
time. The application allows monitoring of values that correspond
closely to real-time data values thus maximizing the scope of
improvements in the patient’s progress.
The application is
implemented on a Java Platform using Swings and is expected to
handle considerable amounts of data up to two days.
Advisors/Committee Members: Gurdip Singh.
Subjects/Keywords: Visualization;
Framework; Graphical
User Interface; Monitoring
Patient Activity; Computer Science (0984)
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share
❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Ayyagari, P. (2010). A
visualization framework for patient data and its
environment. (Masters Thesis). Kansas State University. Retrieved from http://hdl.handle.net/2097/4256
Chicago Manual of Style (16th Edition):
Ayyagari, Pavani. “A
visualization framework for patient data and its
environment.” 2010. Masters Thesis, Kansas State University. Accessed October 24, 2019.
http://hdl.handle.net/2097/4256.
MLA Handbook (7th Edition):
Ayyagari, Pavani. “A
visualization framework for patient data and its
environment.” 2010. Web. 24 Oct 2019.
Vancouver:
Ayyagari P. A
visualization framework for patient data and its
environment. [Internet] [Masters thesis]. Kansas State University; 2010. [cited 2019 Oct 24].
Available from: http://hdl.handle.net/2097/4256.
Council of Science Editors:
Ayyagari P. A
visualization framework for patient data and its
environment. [Masters Thesis]. Kansas State University; 2010. Available from: http://hdl.handle.net/2097/4256
Luleå University of Technology
15.
Danielsson, Peter.
Teleoperated tractor : development of a graphical user interface.
Degree: 2008, Luleå University of Technology
URL: http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-44504
► This thesis is about the development of a graphical user interface for the teleoperated tractor IceMaker I. There are companies in Arjeplog, Sweden that…
(more)
▼ This thesis is about the development of a graphical user interface for the teleoperated tractor IceMaker I. There are companies in Arjeplog, Sweden that provide winter test services for vehicle and component manufacturers from all over the world. One of the leading service providers in Arjeplog is IceMakers. They have during 30 years developed into a full service supplier to their clients. The services include arranging accommodation for the company personnel, providing components and equipment desired by the customer, and the most important task of all: making the ice tracks (often on the lakes), varying in shapes and sizes depending upon the type of testing being conducted. There is a major risk factor involved in the maintenance of the tracks. Running a tractor on the lake ice is not safe since the ice might break. The tractor could end up at the bottom of the lake with the driver trapped inside. IceMakers want a teleoperated tractor in order to decrease the risks for the personnel maintaining the tracks. Another benefit with a teleoperated tractor is that it provides the possibility to extend the winter test season. IceMakers have submitted the development of the control system to a project group at Luleå University of Technology. To enable teleoperation, the tractor has been equipped with a computer, some sensors and other necessary equipment. The user controls the tractor with a joystick, and gets video and data feedback from the tractor. The purpose of this thesis was to develop a user friendly graphical user interface (GUI) for the teleoperated tractor, and also to add support for two new units to the system: a DSP3000 gyro and a GPS receiver. Modifications of the old controller program have been performed in order to make it compatible with the new devices and the GUI. The program has also been restructured in order to make it easier to expand it in the future. Another improvement of the software is increased safety with the addendum of a watchdog. The GUI is written in Java. It can show video from two network cameras and different status information from the tractor. Besides that, functions for showing the tractors GPS position on a user defined local map have been developed. The software has performed well during testing.
Validerat; 20101217 (root)
Subjects/Keywords: Technology; Graphical User Interface; GUI; Teleoperation; Gyro; Hydraulic; Steering; GPS; Teknik
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share
❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Danielsson, P. (2008). Teleoperated tractor : development of a graphical user interface. (Thesis). Luleå University of Technology. Retrieved from http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-44504
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Chicago Manual of Style (16th Edition):
Danielsson, Peter. “Teleoperated tractor : development of a graphical user interface.” 2008. Thesis, Luleå University of Technology. Accessed October 24, 2019.
http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-44504.
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
MLA Handbook (7th Edition):
Danielsson, Peter. “Teleoperated tractor : development of a graphical user interface.” 2008. Web. 24 Oct 2019.
Vancouver:
Danielsson P. Teleoperated tractor : development of a graphical user interface. [Internet] [Thesis]. Luleå University of Technology; 2008. [cited 2019 Oct 24].
Available from: http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-44504.
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Council of Science Editors:
Danielsson P. Teleoperated tractor : development of a graphical user interface. [Thesis]. Luleå University of Technology; 2008. Available from: http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-44504
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Delft University of Technology
16.
Boks, M.A.M.
Design the next generation service management platform: Remote diagnostics:.
Degree: 2012, Delft University of Technology
URL: http://resolver.tudelft.nl/uuid:196c21de-d899-46a8-8558-0daba306ec06
► Introduction: This report describes a graduation project performed at Getinge. Getinge provides complete solutions for, among others disinfection and sterilization departments of hospitals (Chapter 1.…
(more)
▼ Introduction:
This report describes a graduation project performed at Getinge. Getinge provides complete solutions for, among others disinfection and sterilization departments of hospitals (Chapter 1. Background). The assignment was to build an application that supports their complete service process. This service aims at minimizing or preventing a washer-disinfector or sterilizer from breaking down. A breakdown could cause the cancelation of surgeries relatively quickly, because the necessary instruments are still contaminated. The complete service process was studied during the analysis phase. However due to the tight time schedule of this project, the choice was made to continue only with reactive service. In this type of service, an acute breakdown has to be repaired.
Problem:
The aim of reactive service is to get a machine back up and running as quickly as possible, therefore the downtime should be minimized as much as possible. However currently there are delays in the repair process (Chapter 2. Analysis). First of all a service rep can only diagnose a problem on site. To do this he has a to run a complete wash (or sterilization) program to regenerate the error. Next he has access to a large amount of data to diagnose an error. He could see the error messages, read manuals, review the service history, see process graphs and data and look up updates. However these resources lack any form of structure, so he has to figure out what is related. Furthermore he has only a limited amount of spare parts in his service van, so when he has diagnosed a cause, it could be that the needed spare part has to be ordered. This could take two to three days.
Process changes:
Due to the problems mentioned above, it became necessary to change the approach on reactive service (Chapter 3. The idea). All data deriving from the machines can be viewed at the back office, because they are connected to the Internet. Additionally all other resources needed to diagnose an error, are being digitalized at the moment, so it is possible to make a preliminary diagnosis at a distance. This makes it possible to nightly ship the possibly needed spare parts to the service rep and send him the next day to diagnose the error further and subsequently repair the cause.
Design process:
A flow diagram has been designed in which all resources are connected to each other (Paragraph 3.2). This flow diagram shows that resources can be filtered based on the module. This module belongs to the error message that the
user selects as cause. The error message is the reason why a (wash or sterilization) process has been rejected by a machine.
The next step was to divide the flow diagram in pieces that are manageable for a
user to be displayed in one screen. There are different ways to structure information on a screen. The choice is made to put all parts of the flow diagram with the same meaning together in one screen.
Thereafter these “screens” needed to be ordered in a sequence to structure the diagnostics process. This would enable service reps to…
Advisors/Committee Members: Boersema, T., Van Mourik, F..
Subjects/Keywords: Graphical User Interface (GUI); Usability test; Observational Research; Diagnostics; Service
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share
❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Boks, M. A. M. (2012). Design the next generation service management platform: Remote diagnostics:. (Masters Thesis). Delft University of Technology. Retrieved from http://resolver.tudelft.nl/uuid:196c21de-d899-46a8-8558-0daba306ec06
Chicago Manual of Style (16th Edition):
Boks, M A M. “Design the next generation service management platform: Remote diagnostics:.” 2012. Masters Thesis, Delft University of Technology. Accessed October 24, 2019.
http://resolver.tudelft.nl/uuid:196c21de-d899-46a8-8558-0daba306ec06.
MLA Handbook (7th Edition):
Boks, M A M. “Design the next generation service management platform: Remote diagnostics:.” 2012. Web. 24 Oct 2019.
Vancouver:
Boks MAM. Design the next generation service management platform: Remote diagnostics:. [Internet] [Masters thesis]. Delft University of Technology; 2012. [cited 2019 Oct 24].
Available from: http://resolver.tudelft.nl/uuid:196c21de-d899-46a8-8558-0daba306ec06.
Council of Science Editors:
Boks MAM. Design the next generation service management platform: Remote diagnostics:. [Masters Thesis]. Delft University of Technology; 2012. Available from: http://resolver.tudelft.nl/uuid:196c21de-d899-46a8-8558-0daba306ec06
Purdue University
17.
Wang, Dan.
The application of the Hadoop software framework in Bioinformatics programs.
Degree: PhD, Technology, 2016, Purdue University
URL: https://docs.lib.purdue.edu/open_access_dissertations/725
► The project described in this dissertation proposal attempted to improve the efficiency and scalability performance as well as the usability and user experience of…
(more)
▼ The project described in this dissertation proposal attempted to improve the efficiency and scalability performance as well as the usability and
user experience of three Bioinformatics applications - DNA/peptide sequence similarity comparison, digital DNA library subtraction, and DNA/peptide sequence de-duplication - by 1) adopting the Hadoop MapReduce algorithms and distributed file system and 2) implementing the fully automated Hadoop programs into a
user friendly
graphical user interface (GUI). In addition, the researcher was also interested in investigating the advantages and limitations of applying the Hadoop software framework as a general methodology in parallelizing Bioinformatics programs.
After considering the original calculation algorithms in the serial version of the programs, the available computational resources, the nature of the MapReduce framework, and the optimization of performance, a processing pipeline with one pre-processing step, three mappers, two reducers and one post-processing step was developed. Then a GUI
interface that enabled users to specify input/output files and program parameters was created. Also implanted into the GUI were
user friendly features such as organized instruction, detailed log files, multi-
user accessibility, and so on.
The new and fully automated Hadoop Bioinformatics toolkit showed execution efficiency comparable with their MPI counterparts with median to large scale data, and better efficiency than MPI when ultra-large dataset was provided. In addition, good scalability was observed with testing dataset up to 20 Gb.
Advisors/Committee Members: John Springer, John Springer, Kari L. Clase, Michael A. Kane, Dawn D. Laux, Eric Matson.
Subjects/Keywords: Biological sciences; Applied sciences; Bioinformatics; Graphical user interface; Hadoop; Parallelization; Bioinformatics
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share
❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Wang, D. (2016). The application of the Hadoop software framework in Bioinformatics programs. (Doctoral Dissertation). Purdue University. Retrieved from https://docs.lib.purdue.edu/open_access_dissertations/725
Chicago Manual of Style (16th Edition):
Wang, Dan. “The application of the Hadoop software framework in Bioinformatics programs.” 2016. Doctoral Dissertation, Purdue University. Accessed October 24, 2019.
https://docs.lib.purdue.edu/open_access_dissertations/725.
MLA Handbook (7th Edition):
Wang, Dan. “The application of the Hadoop software framework in Bioinformatics programs.” 2016. Web. 24 Oct 2019.
Vancouver:
Wang D. The application of the Hadoop software framework in Bioinformatics programs. [Internet] [Doctoral dissertation]. Purdue University; 2016. [cited 2019 Oct 24].
Available from: https://docs.lib.purdue.edu/open_access_dissertations/725.
Council of Science Editors:
Wang D. The application of the Hadoop software framework in Bioinformatics programs. [Doctoral Dissertation]. Purdue University; 2016. Available from: https://docs.lib.purdue.edu/open_access_dissertations/725
University of Ottawa
18.
Ornelas Barajas, Alejandra.
A Serious Game for Children with Autism Spectrum Disorder
.
Degree: 2017, University of Ottawa
URL: http://hdl.handle.net/10393/36273
► In this thesis, we propose a Serious Game (SG) for children with the Autism Spectrum Disorder (ASD) that builds on the concept of LEGO®-Based Therapy…
(more)
▼ In this thesis, we propose a Serious Game (SG) for children with the Autism Spectrum Disorder (ASD) that builds on the concept of LEGO®-Based Therapy that is aimed at improving social and cognitive skills. The proposed SG is composed of building blocks augmented with electronic modules that connect to a computing device that provides visual feedback. We investigate the effects of using the proposed computer SG by comparing it to a non-computer block-game during two empirical studies, one following an unstructured play approach and a second one with structured play by assigning roles to the players.
For the first study, the proposed system showed an improvement in social interaction, collaborative play and exercise performance, as well as a decrease in solitary play. For the second study, the proposed system showed an improvement in social interaction, positive vocalizations and exploratory behavior. There was also a marked preference towards the proposed game. Furthermore, we perceived a decrease on the assistance needed when using the proposed system during both studies. Our results suggest that the proposed system can be a useful play therapy tool aimed for young children with ASD.
Subjects/Keywords: Serious Game;
Social Skills;
Tangible User Interface;
Graphical User Interface;
Play Therapy;
LEGO-Based Therapy;
Autism Spectrum Disorder;
Special Education
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share
❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Ornelas Barajas, A. (2017). A Serious Game for Children with Autism Spectrum Disorder
. (Thesis). University of Ottawa. Retrieved from http://hdl.handle.net/10393/36273
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Chicago Manual of Style (16th Edition):
Ornelas Barajas, Alejandra. “A Serious Game for Children with Autism Spectrum Disorder
.” 2017. Thesis, University of Ottawa. Accessed October 24, 2019.
http://hdl.handle.net/10393/36273.
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
MLA Handbook (7th Edition):
Ornelas Barajas, Alejandra. “A Serious Game for Children with Autism Spectrum Disorder
.” 2017. Web. 24 Oct 2019.
Vancouver:
Ornelas Barajas A. A Serious Game for Children with Autism Spectrum Disorder
. [Internet] [Thesis]. University of Ottawa; 2017. [cited 2019 Oct 24].
Available from: http://hdl.handle.net/10393/36273.
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Council of Science Editors:
Ornelas Barajas A. A Serious Game for Children with Autism Spectrum Disorder
. [Thesis]. University of Ottawa; 2017. Available from: http://hdl.handle.net/10393/36273
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Brno University of Technology
19.
Štěrba, Ondřej.
Uživatelské rozhraní pro mobilního tlumočníka
.
Degree: 2013, Brno University of Technology
URL: http://hdl.handle.net/11012/54895
► Tato bakalářská práce se zabývá problematikou návrhu, implementace a testování grafického uživatelského rozhraní pro aplikaci Mobilní tlumočník. Tvorba rozhraní je zaměřena na platformu Android. První část…
(more)
▼ Tato bakalářská práce se zabývá problematikou návrhu, implementace a testování grafického uživatelského rozhraní pro aplikaci Mobilní tlumočník. Tvorba rozhraní je zaměřena na platformu Android. První část vysvětluje pojmy uživatelské rozhraní, zabývá se studiem existujících řešení a platformou Android. Dále jsou navržena dvě uživatelská rozhraní. Poslední část obsahuje vyhodnocení provedeného testování a návrh změn. Cílem testování je také ověřit, zda uživatelské rozhraní může mít vliv na podstatu aplikace.; The objective of the bachelor thesis is development, implementation and testing of
graphical user interface (GUI) for Mobile translator application.
Interface problem is focused to Android mobile platform. First part explains terms as UI, deal with the current solutions and GUI development. Thesis continues with development of two interfaces. The last section contains evaluation of testing, and changes suggestion. Purpose of thesis is to prove the effect of GUI to application principle.
Advisors/Committee Members: Beran, Vítězslav (advisor).
Subjects/Keywords: Mobilní tlumočník;
uživatelské rozhraní;
grafické uživatelské rozhraní;
Android;
tesseract.;
Mobile translator;
user interface;
graphical user interface;
Android;
tesseract.
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share
❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Štěrba, O. (2013). Uživatelské rozhraní pro mobilního tlumočníka
. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/54895
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Chicago Manual of Style (16th Edition):
Štěrba, Ondřej. “Uživatelské rozhraní pro mobilního tlumočníka
.” 2013. Thesis, Brno University of Technology. Accessed October 24, 2019.
http://hdl.handle.net/11012/54895.
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
MLA Handbook (7th Edition):
Štěrba, Ondřej. “Uživatelské rozhraní pro mobilního tlumočníka
.” 2013. Web. 24 Oct 2019.
Vancouver:
Štěrba O. Uživatelské rozhraní pro mobilního tlumočníka
. [Internet] [Thesis]. Brno University of Technology; 2013. [cited 2019 Oct 24].
Available from: http://hdl.handle.net/11012/54895.
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Council of Science Editors:
Štěrba O. Uživatelské rozhraní pro mobilního tlumočníka
. [Thesis]. Brno University of Technology; 2013. Available from: http://hdl.handle.net/11012/54895
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Brno University of Technology
20.
Petruželka, Jiří.
Webový portál pro anotaci obrazových dat
.
Degree: 2012, Brno University of Technology
URL: http://hdl.handle.net/11012/55119
► Cílem práce je navržení a implementování integrovatelného webového rozhraní pro anotování obrazových dat. Toto rozhraní bude interagovat s daným serverem za účelem načtení a ukládání…
(more)
▼ Cílem práce je navržení a implementování integrovatelného webového rozhraní pro anotování obrazových dat. Toto rozhraní bude interagovat s daným serverem za účelem načtení a ukládání anotací a získávání doporučených anotací.; The purpose of this thesis is to design and implement an embeddable
interface for visual data annotating. This
interface would communicate with a given server for the purpose of acquiring and persisting data and receiving suggested annotations.
Advisors/Committee Members: Láník, Aleš (advisor).
Subjects/Keywords: uživatelské rozhraní;
webové rozhraní;
grafické rozhraní;
anotování;
obrazová data;
JavaScript;
user interface;
web interface;
graphical interface;
annotating;
visual data;
JavaScript
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share
❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Petruželka, J. (2012). Webový portál pro anotaci obrazových dat
. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/55119
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Chicago Manual of Style (16th Edition):
Petruželka, Jiří. “Webový portál pro anotaci obrazových dat
.” 2012. Thesis, Brno University of Technology. Accessed October 24, 2019.
http://hdl.handle.net/11012/55119.
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
MLA Handbook (7th Edition):
Petruželka, Jiří. “Webový portál pro anotaci obrazových dat
.” 2012. Web. 24 Oct 2019.
Vancouver:
Petruželka J. Webový portál pro anotaci obrazových dat
. [Internet] [Thesis]. Brno University of Technology; 2012. [cited 2019 Oct 24].
Available from: http://hdl.handle.net/11012/55119.
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Council of Science Editors:
Petruželka J. Webový portál pro anotaci obrazových dat
. [Thesis]. Brno University of Technology; 2012. Available from: http://hdl.handle.net/11012/55119
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
ITESO – Universidad Jesuita de Guadalajara
21.
Camacho-Mendoza, Raúl A.
Embedded Graphic User Interface for Automotive Cluster
.
Degree: 2017, ITESO – Universidad Jesuita de Guadalajara
URL: http://hdl.handle.net/11117/4300
Subjects/Keywords: Linux;
Automotive Cluster;
Graphical User Interface
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share
❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Camacho-Mendoza, R. A. (2017). Embedded Graphic User Interface for Automotive Cluster
. (Thesis). ITESO – Universidad Jesuita de Guadalajara. Retrieved from http://hdl.handle.net/11117/4300
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Chicago Manual of Style (16th Edition):
Camacho-Mendoza, Raúl A. “Embedded Graphic User Interface for Automotive Cluster
.” 2017. Thesis, ITESO – Universidad Jesuita de Guadalajara. Accessed October 24, 2019.
http://hdl.handle.net/11117/4300.
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
MLA Handbook (7th Edition):
Camacho-Mendoza, Raúl A. “Embedded Graphic User Interface for Automotive Cluster
.” 2017. Web. 24 Oct 2019.
Vancouver:
Camacho-Mendoza RA. Embedded Graphic User Interface for Automotive Cluster
. [Internet] [Thesis]. ITESO – Universidad Jesuita de Guadalajara; 2017. [cited 2019 Oct 24].
Available from: http://hdl.handle.net/11117/4300.
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Council of Science Editors:
Camacho-Mendoza RA. Embedded Graphic User Interface for Automotive Cluster
. [Thesis]. ITESO – Universidad Jesuita de Guadalajara; 2017. Available from: http://hdl.handle.net/11117/4300
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
University of Illinois – Chicago
22.
Sharma, Kruti.
Generating smartphone phishing applications for deception based defense.
Degree: 2017, University of Illinois – Chicago
URL: http://hdl.handle.net/10027/21852
► Graphical User Interface (GUI)-based APplications (GAPs) are ubiquitous, both in personal and business use and they are deployed on diverse software and hardware platforms. Android…
(more)
▼ Graphical User Interface (GUI)-based APplications (GAPs) are ubiquitous, both in personal and business use and they are deployed on diverse software and hardware platforms. Android has been increasingly adopted as operating system for smartphones and is gaining popularity. With this increase, the smartphones are now built with capabilities to assist Users With Disabilities (UWDs). There are close to 50Mil people in USA and nearly 600Mil people worldwide who have some form of disability ranging from vision impairment to hearing etc. UWDs need specialized assistance with GAPs. Accessibility Services (AS) are embedded in smartphones to assist UWDs with GUI interaction but these mobile assistive technologies are fundamentally insecure thus exposing smartphones to a variety of attacks.
SEAPHISH (SEcuring Accessibility using PHISHing) platform aims to analyze security issues and threats posed by AS which can effectively simulate the human
user of the smartphone. The platform uses existing mobile apps which are already installed on the users smartphones to extract GUI properties via AS to generate a similar looking app i.e. a phishing app. These phished apps can help in predicting and mitigating security threats posed by malicious applications using deception as a base for defense.
Advisors/Committee Members: Grechanik, Mark (advisor).
Subjects/Keywords: phishing; android security; graphical user interface; assistive technology; accessibility service; smartphone apps; android
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share
❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Sharma, K. (2017). Generating smartphone phishing applications for deception based defense. (Thesis). University of Illinois – Chicago. Retrieved from http://hdl.handle.net/10027/21852
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Chicago Manual of Style (16th Edition):
Sharma, Kruti. “Generating smartphone phishing applications for deception based defense.” 2017. Thesis, University of Illinois – Chicago. Accessed October 24, 2019.
http://hdl.handle.net/10027/21852.
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
MLA Handbook (7th Edition):
Sharma, Kruti. “Generating smartphone phishing applications for deception based defense.” 2017. Web. 24 Oct 2019.
Vancouver:
Sharma K. Generating smartphone phishing applications for deception based defense. [Internet] [Thesis]. University of Illinois – Chicago; 2017. [cited 2019 Oct 24].
Available from: http://hdl.handle.net/10027/21852.
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Council of Science Editors:
Sharma K. Generating smartphone phishing applications for deception based defense. [Thesis]. University of Illinois – Chicago; 2017. Available from: http://hdl.handle.net/10027/21852
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Anna University
23.
Sudha ponnarasi, S.
Minutiae extraction gender classification and age
classification from fingerprints; -.
Degree: Information and Communication
Engineering, 2014, Anna University
URL: http://shodhganga.inflibnet.ac.in/handle/10603/24394
► As there is a tremendous and revolutionary growth in the field of science and engineering it is a complicated task to protect the secured data…
(more)
▼ As there is a tremendous and revolutionary growth
in the field of science and engineering it is a complicated task to
protect the secured data and to provide necessary steps to avoid
the theft of confidential details such as official particulars
banking records i e financial reports etc and hence it is essential
to have a reliable and a consistent personal identification system
Only biometrics can meet the ever increasing requirement for
security in critical applications The foremost assignment is to
spot out the holder of the defense structure The client s
individuality is checked by the biometric security system This is
accomplished by contrasting the behavioral or physiological
attributes of newlinethe owner Fingerprints are used for over a
decade and moreover it has been a broadly accepted form of
biometric identification Due to its high uniqueness permanence
performance and circumvention the fingerprint biometrics is the
most widely used technique Fingerprints consist of a series of
black line called ridges and white lines called valleys or furrows
Fingerprints are represented by their local characteristics called
minutiae points i e the ridge ending points and bifurcation points
newline newline
References p.160-173
Advisors/Committee Members: Rajaram, M.
Subjects/Keywords: Age classification; Biometric; Fingerprints; Gender classification; Graphical User Interface; Information and communication engineering
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share
❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Sudha ponnarasi, S. (2014). Minutiae extraction gender classification and age
classification from fingerprints; -. (Thesis). Anna University. Retrieved from http://shodhganga.inflibnet.ac.in/handle/10603/24394
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Chicago Manual of Style (16th Edition):
Sudha ponnarasi, S. “Minutiae extraction gender classification and age
classification from fingerprints; -.” 2014. Thesis, Anna University. Accessed October 24, 2019.
http://shodhganga.inflibnet.ac.in/handle/10603/24394.
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
MLA Handbook (7th Edition):
Sudha ponnarasi, S. “Minutiae extraction gender classification and age
classification from fingerprints; -.” 2014. Web. 24 Oct 2019.
Vancouver:
Sudha ponnarasi S. Minutiae extraction gender classification and age
classification from fingerprints; -. [Internet] [Thesis]. Anna University; 2014. [cited 2019 Oct 24].
Available from: http://shodhganga.inflibnet.ac.in/handle/10603/24394.
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Council of Science Editors:
Sudha ponnarasi S. Minutiae extraction gender classification and age
classification from fingerprints; -. [Thesis]. Anna University; 2014. Available from: http://shodhganga.inflibnet.ac.in/handle/10603/24394
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Univerzitet u Beogradu
24.
Mijailović, Žarko. 1981-.
Развој графичког корисничког интерфејса пословних
апликација базиран на подели одговорности и објектном моделу
података са UML семантиком.
Degree: Elektrotehnički fakultet, 2016, Univerzitet u Beogradu
URL: https://fedorabg.bg.ac.rs/fedora/get/o:12287/bdef:Content/get
► У овој дисертацији представљен је нови приступ моделовању и имплементацији графичких корисничких интерфејса информационих система и пословних апликација. Циљ дисертације је да предложи ефикасно решење…
(more)
▼ У овој дисертацији представљен је нови приступ
моделовању и имплементацији графичких корисничких интерфејса
информационих система и пословних апликација. Циљ дисертације је да
предложи ефикасно решење за проблем комплексности у изради
корисничких интерфејса. Предложено решење се темељи на неколико
основних принципа: на раздвајању одговорности у процесу израде
корисничких интерфејса, апстракцији, хијерархијској декомпозицији и
енкапсулацији фрагмената корисничког интерфејса, као и на
одговарајућој семантичкој спрези са објектним простором (подацима и
пословном логиком). Принцип раздвајања одговорности у развоју
графичких корисничких интерфејса је детаљно елабориран у овој
дисертацији. Најпре је извршена опширна анализа практичних проблема
у програмирању корисничких интерфејса. На основу извршене анализе
предложен је оквир основних одговорности који је затим емпиријски
потврђен. Приступ моделовању и имплементацији корисничких
интерфејса о коме је реч ослања се на предложени оквир одговорности
и посебно адресира управљање структуром, понашање и приступ
подацима као кључне одговорности у развоју корисничког интерфејса.
Са друге стране, потпуно ортогонално, принципи апстракције,
хијерархијске декомпозиције и енкапсулације фрагмената корисничког
интерфејса подржани су предложеним концептом тзв. капсуле. Капсула
је профилисана структурирана класa из стандардног језика UML (енгл.
Unified Modeling Language) са јасним интерфејсом. Капсула може да
апстрахује како основне (примитивне) графичке елементе, тако и веће
фрагменте корисничког интерфејса састављене од више логички и
функционално повезаних графичких елемената или других капсула. Као
последица тога, концепт капсуле може се применити на моделовање
делова корисничког интефрејса на свим нивоима детаља, од најнижег
нивоа појединачних графичких елемената до највишег нивоа
архитектуре. Интерфејс капсула дефинише се уз помоћ посебног
концепта пина (енгл. pin), док се функционална спрега капсула
(понашање) реализује декларативним повезивањем пинова уз помоћ тзв.
жица (енгл. wire). Пинови и жице преносе поруке између капсула и
осигуравају стриктну енкапсулацију. Техника представљена у овој
дисертацији укључује и методу за спрезање капсула са доменским
објектним простором која има одговарајући ниво апстракције и
обезбеђује стриктно одвајање одговорности слоја корисничког
интерфејса и слоја пословне логике. У овој дисертацији представљена
је имплементација ове технике са доменским језиком и напредном
библиотеком графичких елемената за развој корисничких интерфејса.
Језик и библиотека обезбеђују јасно раздвајање одговорности,
решавају проблеме развоја и одржавања комплексних структура
корисничког интерфејса, а при томе омогућавају непосредну и чврсту
семантичку спрегу са моделом података пословне апликације на језику
UML. Коначно, спроведена је експериментална евалуација технике
предложене у овој дисертацији у односу на неколико важних
критеријума. Најпре је проверена њена практична употребљивост кроз
анализу већег броја реалних софтверских пројеката и система који се
успешно…
Advisors/Committee Members: Milićev, Dragan. 1968-.
Subjects/Keywords: Graphical user interface; information systems;
separation of concerns; modeling; Unified Modeling Language
(UML)
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share
❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Mijailović, . 1. (2016). Развој графичког корисничког интерфејса пословних
апликација базиран на подели одговорности и објектном моделу
података са UML семантиком. (Thesis). Univerzitet u Beogradu. Retrieved from https://fedorabg.bg.ac.rs/fedora/get/o:12287/bdef:Content/get
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Chicago Manual of Style (16th Edition):
Mijailović, Žarko 1981-. “Развој графичког корисничког интерфејса пословних
апликација базиран на подели одговорности и објектном моделу
података са UML семантиком.” 2016. Thesis, Univerzitet u Beogradu. Accessed October 24, 2019.
https://fedorabg.bg.ac.rs/fedora/get/o:12287/bdef:Content/get.
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
MLA Handbook (7th Edition):
Mijailović, Žarko 1981-. “Развој графичког корисничког интерфејса пословних
апликација базиран на подели одговорности и објектном моделу
података са UML семантиком.” 2016. Web. 24 Oct 2019.
Vancouver:
Mijailović 1. Развој графичког корисничког интерфејса пословних
апликација базиран на подели одговорности и објектном моделу
података са UML семантиком. [Internet] [Thesis]. Univerzitet u Beogradu; 2016. [cited 2019 Oct 24].
Available from: https://fedorabg.bg.ac.rs/fedora/get/o:12287/bdef:Content/get.
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Council of Science Editors:
Mijailović 1. Развој графичког корисничког интерфејса пословних
апликација базиран на подели одговорности и објектном моделу
података са UML семантиком. [Thesis]. Univerzitet u Beogradu; 2016. Available from: https://fedorabg.bg.ac.rs/fedora/get/o:12287/bdef:Content/get
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
25.
Χαρτουμπέκης, Γιώργος.
Ασύρματα δίκτυα αισθητήρων : ανάπτυξη γραφικού περιβάλλοντος με το Μatlab για τη λήψη μετρήσεων με χρήση του MTS400/420 board της Crossbow.
Degree: 2010, University of Patras
URL: http://nemertes.lis.upatras.gr/jspui/handle/10889/4249
► Στην παρούσα εργασία έγινε μια πρώτη προσπάθεια ενασχόλησης με τα Ασύρματα Δίκτυα Αισθητήρων, πιο γνωστά στον επιστημονικό κόσμο ως Wireless Sensor Networks ή WSNs. Μελετήσαμε…
(more)
▼ Στην παρούσα εργασία έγινε μια πρώτη προσπάθεια ενασχόλησης με τα Ασύρματα Δίκτυα Αισθητήρων, πιο γνωστά στον επιστημονικό κόσμο ως Wireless Sensor Networks ή WSNs. Μελετήσαμε τα βασικά χαρακτηριστικά των δικτύων αυτών, όπως οι τοπολογίες τους και η αρχιτεκτονική τους. Επίσης, μελετήσαμε την αρχιτεκτονική των ασύρματων κόμβων που απαρτίζουν το δίκτυο, που είναι γνωστά σαν motes. Τα motes έχουν την ικανότητα τοπικής επεξεργασίας των δεδομένων που συλλέγουν και την ασύρματη μετάδοσή τους σε έναν κεντρικό σταθμό για περαιτέρω επεξεργασία. Τη λειτουργία αυτή διεκπαιρεώνει μια μονάδα μικροεπεξεργαστή με τη χρήση ενός ολοκληρωμένου chip για την ασύρματη μετάδοση. Για τη συλλογή των μετρήσεων μπορούν να φιλοξενήσουν διάφορες πλατφόρμες ψηφιακών αισθητήρων.
Στην παρούσα εργασία έγινε χρήση της υπολογιστικής μονάδας micaz και της πλατφόρμας αισθητήρων MTS400/420. Οι πλατφόρμες αυτές φιλοξενούν αισθητήρες υγρασίας/θερμοκρασίας, βαρομετρικής πίεσης/θερμοκρασίας, φωτεινότητας, μέτρησης δονήσεων και ειδικά η 420 πλατφόρμα έχει υποδοχή και για μονάδα GPS.
Σκοπός μας ήταν η ανάπτυξη ενός γραφικού περιβάλλοντος μέσω του οποίου θα απεικονίζαμε τις μετρήσεις που έστελναν στον υπολογιστή τα motes. Η ανάπτυξη του γραφικού περιβάλλοντος έγινε στο Matlab. Για το σκοπό αυτό, ήταν απαραίτητη η σύνδεση ενός mote στον υπολογιστή που θα λειτουργούσε σαν ενδιάμεσος αποδέκτης των δεδομένων και θα τα προωθούσε στον υπολογιστή μέσω της σειριακής θύρας. Για την προβολή και αποθήκευση των δεδομένων στον υπολογιστή, έγινε χρήση του interface Χlisten.
At this thesis there was a first attempt of occupation with Wireless Sensor Networks, most kown to the scientific world as WSNs. We studied the basic characteristics of these networks such as topologies and architecture. We also studied the architecture of the wireless nodes which form the network, also known as motes.The motes have the ability of local data computation and the wireless transmition of them to a base station, where they can further processed. This ability is performed by a microprocessor unit with the use of a single integrated chip responsible for the radio transmition. The data collection can be performed by many digital sensor platforms.
At this paper, it has been used the micaz computional unit and the MTS400/420 sensor platform of Crossbow company. These platforms are integrated with sensors that measure relative humidity/temperature, barometric pressure/temperature, illumination, acceleration on axis x and y and especially the 420 platform can integrate a GPS module.
Our goal is the development of a Graphical User Interface (GUI) through which we can plot the data that the sensors would send. The development of GUI made with Matlab. For this purpose, it was necessary the connection of a mote to the computer, that would behave like an intermediate receiver and would forward the data packets to the computer through the serial port. The MIB520 board was used for this purpose. For the data projection and saving to the computer, the xlisten interface was used.
Advisors/Committee Members: Ζυγούρης, Ευάγγελος, Hartoubekis, George, Μπακάλης, Δημήτριος, Φωτόπουλος, Σπυρίδων, Ζυγούρης, Ευάγγελος.
Subjects/Keywords: Ασύρματα δίκτυα αισθητήρων; Γραφικό περιβάλλον; 681.2; Wireless Sensor Networks (WSN); Graphical User Interface; Matlab; Crossbow
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share
❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Χαρτουμπέκης, . (2010). Ασύρματα δίκτυα αισθητήρων : ανάπτυξη γραφικού περιβάλλοντος με το Μatlab για τη λήψη μετρήσεων με χρήση του MTS400/420 board της Crossbow. (Masters Thesis). University of Patras. Retrieved from http://nemertes.lis.upatras.gr/jspui/handle/10889/4249
Chicago Manual of Style (16th Edition):
Χαρτουμπέκης, Γιώργος. “Ασύρματα δίκτυα αισθητήρων : ανάπτυξη γραφικού περιβάλλοντος με το Μatlab για τη λήψη μετρήσεων με χρήση του MTS400/420 board της Crossbow.” 2010. Masters Thesis, University of Patras. Accessed October 24, 2019.
http://nemertes.lis.upatras.gr/jspui/handle/10889/4249.
MLA Handbook (7th Edition):
Χαρτουμπέκης, Γιώργος. “Ασύρματα δίκτυα αισθητήρων : ανάπτυξη γραφικού περιβάλλοντος με το Μatlab για τη λήψη μετρήσεων με χρήση του MTS400/420 board της Crossbow.” 2010. Web. 24 Oct 2019.
Vancouver:
Χαρτουμπέκης . Ασύρματα δίκτυα αισθητήρων : ανάπτυξη γραφικού περιβάλλοντος με το Μatlab για τη λήψη μετρήσεων με χρήση του MTS400/420 board της Crossbow. [Internet] [Masters thesis]. University of Patras; 2010. [cited 2019 Oct 24].
Available from: http://nemertes.lis.upatras.gr/jspui/handle/10889/4249.
Council of Science Editors:
Χαρτουμπέκης . Ασύρματα δίκτυα αισθητήρων : ανάπτυξη γραφικού περιβάλλοντος με το Μatlab για τη λήψη μετρήσεων με χρήση του MTS400/420 board της Crossbow. [Masters Thesis]. University of Patras; 2010. Available from: http://nemertes.lis.upatras.gr/jspui/handle/10889/4249
University of Adelaide
26.
Skrodal, Simon.
Virtual classroom simulation: design and trial in a preservice teacher education program.
Degree: 2010, University of Adelaide
URL: http://hdl.handle.net/2440/65251
► “The Virtual Classroom Simulation, Design and Trial in a Preservice Teacher Education Program” (VCS), is trans-disciplinary research study that aimed to design, embed, trial and…
(more)
▼ “The Virtual Classroom Simulation, Design and Trial in a Preservice Teacher
Education Program” (VCS), is trans-disciplinary research study that aimed to
design, embed, trial and evaluate a simulation system and its learning outcomes.
This document encapsulates the motivation, conceptualisation, theory,
development, trials and evaluation behind the study. Expert technology transfer,
particularly from areas in education, psychology, social sciences, conceptual
modelling, computer science and underlying mixed methods research design, has
been instrumental in underpinning the research and development of the VCS.
Prospective education students have preconceived ideas, or mental models, about
teaching and learning that are often based on their own experiences as students.
The School of Education at the University of Adelaide offers a number of courses
that provide insights into both the theory and practice of education. The practicum
component provides a valuable, real-life, experience that may improve education
students’ understanding about teaching, learning and classroom interactions. It
may also enable them to better understand and apply effective teaching strategies
to enhance student learning outcome. Some research studies, however, suggest that
providers of teacher education do not sufficiently stimulate education students to
challenge their own preconceptions about teaching and learning.
This study aimed to identify and deconstruct essential attributes of a specific
teaching-learning context and reconstruct these in a virtual environment. It involved
the development of an interactive computer simulation training tool to be trialled in
a population of education students. The simulation was projected to be an important
enabler of praxis (the nexus between theory, reflection and practice), thus useful in
challenging and adjusting education students’ mental models about student-teacher
interaction.
The VCS and related materials (lecture, trial, surveys and assignment) were integrated in the first-semester course “Student-Teacher Interaction in the
Classroom 1”, a compulsory course for students enrolled in the degrees of Bachelor
of Teaching (4th year) and Graduate Diploma in Education. Prior to the delivery
of an introductory lecture and administration of VCS
user trials, student
perceptions and views about the teacher, students, task and learning environment
were elicited. The VCS and associated activities provided a gauge to understand
changes to education students’ mental models. To determine and evaluate the
effectiveness of the VCS and related learning, a number of objective measurement
techniques and methods were used. In order to complement the quantitative
methods utilised, qualitative research methods were used to examine the rich data
source obtained through open-ended questions posed to the students.
Many research studies have positioned the value of mixed-methods. This study
highlights the value of triangulation and the use of exploratory, explanatory and
confirmatory models in understanding the…
Advisors/Committee Members: Alagumalai, Sivakumar (advisor), Lawson, Michael J. (advisor), Calder, Paul (advisor), School of Education (school).
Subjects/Keywords: educational simulation; teacher training; thesis; design; trial; simulation framework; graphical user interface; mixed methods
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share
❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Skrodal, S. (2010). Virtual classroom simulation: design and trial in a preservice teacher education program. (Thesis). University of Adelaide. Retrieved from http://hdl.handle.net/2440/65251
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Chicago Manual of Style (16th Edition):
Skrodal, Simon. “Virtual classroom simulation: design and trial in a preservice teacher education program.” 2010. Thesis, University of Adelaide. Accessed October 24, 2019.
http://hdl.handle.net/2440/65251.
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
MLA Handbook (7th Edition):
Skrodal, Simon. “Virtual classroom simulation: design and trial in a preservice teacher education program.” 2010. Web. 24 Oct 2019.
Vancouver:
Skrodal S. Virtual classroom simulation: design and trial in a preservice teacher education program. [Internet] [Thesis]. University of Adelaide; 2010. [cited 2019 Oct 24].
Available from: http://hdl.handle.net/2440/65251.
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Council of Science Editors:
Skrodal S. Virtual classroom simulation: design and trial in a preservice teacher education program. [Thesis]. University of Adelaide; 2010. Available from: http://hdl.handle.net/2440/65251
Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
Vilnius Pedagogical University
27.
Gomazkova,
Natalija.
Kreivių išlyginimo metodų realizacija MAPLE
vaizdinėje aplinkoje.
Degree: Master, Informatics, 2006, Vilnius Pedagogical University
URL: http://vddb.laba.lt/obj/LT-eLABa-0001:E.02~2006~D_20060613_164943-32537
;
► The modern programs must have a comfortable graphical user interface (GUI). Graphical interface is the environment for creation of graphical window with visual elements: buttons,…
(more)
▼ The modern programs must have a comfortable
graphical user interface (GUI).
Graphical interface is the
environment for creation of
graphical window with visual elements:
buttons, edit text boxes, check boxes, list boxes, menu, toolbars
etc., where a
user chooses appropriate problem conditions, input
data and sets proper options. For the development of such programs
visual programming environments C++ Builder, Delphi, Visual Basic
etc. were developed a decade ago. Recently
user graphical interface
technology was also implemented in the Computer Algebra Systems
Maple (www.maplesoft.com), Mathematica (www.wolfram.com) and MatLab
(www.mathworks.com). The present work investigates Maple
graphical
user interface creation facilities. It is possible to create GUI
with Maplets package or in Maplet Builder design environment. This
work examines these two methods with examples. The GUI creation
facilities were tried investigating the curve fitting methods of
Maple system. Some applied programs, using Maple Curve Fitting
package, were created in Maple visual environment. The practical
problem of speech sound formants variation curves fitting was also
investigated. For that task some programs were created in the Maple
visual environment.
Advisors/Committee Members: Šimonytė, Virginija (Master’s thesis reviewer), Kazlauskas, Kazys (Master’s degree committee chair), Lipeikienė, Joana (Master’s degree committee member), Lipeikienė, Joana (Master’s thesis supervisor), Dzemyda, Gintautas (Master’s degree committee member), Račienė, Jurga (Master’s degree session secretary).
Subjects/Keywords: Graphical user interface; Vartotojo grafinė sąsaja
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share
❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Gomazkova,
Natalija. (2006). Kreivių išlyginimo metodų realizacija MAPLE
vaizdinėje aplinkoje. (Masters Thesis). Vilnius Pedagogical University. Retrieved from http://vddb.laba.lt/obj/LT-eLABa-0001:E.02~2006~D_20060613_164943-32537 ;
Note: this citation may be lacking information needed for this citation format:
Author name may be incomplete
Chicago Manual of Style (16th Edition):
Gomazkova,
Natalija. “Kreivių išlyginimo metodų realizacija MAPLE
vaizdinėje aplinkoje.” 2006. Masters Thesis, Vilnius Pedagogical University. Accessed October 24, 2019.
http://vddb.laba.lt/obj/LT-eLABa-0001:E.02~2006~D_20060613_164943-32537 ;.
Note: this citation may be lacking information needed for this citation format:
Author name may be incomplete
MLA Handbook (7th Edition):
Gomazkova,
Natalija. “Kreivių išlyginimo metodų realizacija MAPLE
vaizdinėje aplinkoje.” 2006. Web. 24 Oct 2019.
Note: this citation may be lacking information needed for this citation format:
Author name may be incomplete
Vancouver:
Gomazkova,
Natalija. Kreivių išlyginimo metodų realizacija MAPLE
vaizdinėje aplinkoje. [Internet] [Masters thesis]. Vilnius Pedagogical University; 2006. [cited 2019 Oct 24].
Available from: http://vddb.laba.lt/obj/LT-eLABa-0001:E.02~2006~D_20060613_164943-32537 ;.
Note: this citation may be lacking information needed for this citation format:
Author name may be incomplete
Council of Science Editors:
Gomazkova,
Natalija. Kreivių išlyginimo metodų realizacija MAPLE
vaizdinėje aplinkoje. [Masters Thesis]. Vilnius Pedagogical University; 2006. Available from: http://vddb.laba.lt/obj/LT-eLABa-0001:E.02~2006~D_20060613_164943-32537 ;
Note: this citation may be lacking information needed for this citation format:
Author name may be incomplete
28.
Song, Wen.
Planetary
navigation activity recognition using wearable accelerometer
data.
Degree: MS, Department of Electrical &
Computer Engineering, 2013, Kansas State University
URL: http://hdl.handle.net/2097/15813
► Activity recognition can be an important part of human health awareness. Many benefits can be generated from the recognition results, including knowledge of activity intensity…
(more)
▼ Activity recognition can be an important part of human
health awareness. Many benefits can be generated from the
recognition results, including knowledge of activity intensity as
it relates to wellness over time. Various activity-recognition
techniques have been presented in the literature, though most
address simple activity-data collection and off-line analysis. More
sophisticated real-time identification is less often addressed.
Therefore, it is promising to consider the combination of current
off-line, activity-detection methods with wearable, embedded tools
in order to create a real-time wireless human activity recognition
system with improved accuracy.
Different from previous work on
activity recognition, the goal of this effort is to focus on
specific activities that an astronaut may encounter during a
mission. Planetary navigation field test (PNFT) tasks are designed
to meet this need. The approach used by the KSU team is to
pre-record data on the ground in normal earth gravity and seek
signal features that can be used to identify, and even predict,
fatigue associated with these activities. The eventual goal is to
then assess/predict the condition of an astronaut in a
reduced-gravity environment using these predetermined rules.
Several classic machine learning algorithms, including the
k-Nearest Neighbor, Naïve Bayes, C4.5 Decision Tree, and Support
Vector Machine approaches, were applied to these data to identify
recognition algorithms suitable for real-time application.
Graphical user interfaces (GUIs) were designed for both MATLAB and
LabVIEW environments to facilitate recording and data analysis.
Training data for the machine learning algorithms were recorded
while subjects performed each activity, and then these
identification approaches were applied to new data sets with an
identification accuracy of around 86%. Early results indicate that
a single three-axis accelerometer is sufficient to identify the
occurrence of a given PNFT activity.
A custom, embedded
acceleration monitoring system employing ZigBee transmission is
under development for future real-time activity recognition
studies. A different GUI has been implemented for this system,
which uses an on-line algorithm that will seek to identify activity
at a refresh rate of 1 Hz.
Advisors/Committee Members: Steve Warren.
Subjects/Keywords: Activity
recognition; Machine
learning; Graphical
User Interface;
Accelerometer; Feature
selection; Electrical Engineering (0544)
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share
❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Song, W. (2013). Planetary
navigation activity recognition using wearable accelerometer
data. (Masters Thesis). Kansas State University. Retrieved from http://hdl.handle.net/2097/15813
Chicago Manual of Style (16th Edition):
Song, Wen. “Planetary
navigation activity recognition using wearable accelerometer
data.” 2013. Masters Thesis, Kansas State University. Accessed October 24, 2019.
http://hdl.handle.net/2097/15813.
MLA Handbook (7th Edition):
Song, Wen. “Planetary
navigation activity recognition using wearable accelerometer
data.” 2013. Web. 24 Oct 2019.
Vancouver:
Song W. Planetary
navigation activity recognition using wearable accelerometer
data. [Internet] [Masters thesis]. Kansas State University; 2013. [cited 2019 Oct 24].
Available from: http://hdl.handle.net/2097/15813.
Council of Science Editors:
Song W. Planetary
navigation activity recognition using wearable accelerometer
data. [Masters Thesis]. Kansas State University; 2013. Available from: http://hdl.handle.net/2097/15813
29.
Moreno Sanchez, M.A.
Applying the supply-driven integrated design upon a Modular Façade company:.
Degree: 2012, Delft University of Technology
URL: http://resolver.tudelft.nl/uuid:e5a067a8-13a8-4bd4-9d47-d88c07c046a8
Subjects/Keywords: supply driven; graphical user interface
…coordinate all existing applications.
User-friendly interface; Park (2010) recognizes the… …for parametric design. However, the setup of the user-friendly
interface is not clearly… …satisfy
customer’s needs and creates a solution that satisfies the requirements that the user… …from Jensen (2010).
For the user of the configuration system, the process begins… …supplier-driven manner. The website would be provided with some easy-prototyping
interface, where…
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share
❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Moreno Sanchez, M. A. (2012). Applying the supply-driven integrated design upon a Modular Façade company:. (Masters Thesis). Delft University of Technology. Retrieved from http://resolver.tudelft.nl/uuid:e5a067a8-13a8-4bd4-9d47-d88c07c046a8
Chicago Manual of Style (16th Edition):
Moreno Sanchez, M A. “Applying the supply-driven integrated design upon a Modular Façade company:.” 2012. Masters Thesis, Delft University of Technology. Accessed October 24, 2019.
http://resolver.tudelft.nl/uuid:e5a067a8-13a8-4bd4-9d47-d88c07c046a8.
MLA Handbook (7th Edition):
Moreno Sanchez, M A. “Applying the supply-driven integrated design upon a Modular Façade company:.” 2012. Web. 24 Oct 2019.
Vancouver:
Moreno Sanchez MA. Applying the supply-driven integrated design upon a Modular Façade company:. [Internet] [Masters thesis]. Delft University of Technology; 2012. [cited 2019 Oct 24].
Available from: http://resolver.tudelft.nl/uuid:e5a067a8-13a8-4bd4-9d47-d88c07c046a8.
Council of Science Editors:
Moreno Sanchez MA. Applying the supply-driven integrated design upon a Modular Façade company:. [Masters Thesis]. Delft University of Technology; 2012. Available from: http://resolver.tudelft.nl/uuid:e5a067a8-13a8-4bd4-9d47-d88c07c046a8
Delft University of Technology
30.
Oude Egberink, J.
Diagnostic tool interaction design for DAF and Paccar mechanics:.
Degree: 2010, Delft University of Technology
URL: http://resolver.tudelft.nl/uuid:629ac832-b97e-4bc9-963d-3ee3a06c4a9f
► This report presents a reinterpreted Human Machine Interface (HMI)design aimed at the DAVIE diagnostic tool and facilitating an efficient workflow for DAF and Paccar mechanics.…
(more)
▼ This report presents a reinterpreted Human Machine
Interface (HMI)design aimed at the DAVIE diagnostic tool and facilitating an efficient workflow for DAF and Paccar mechanics. It describes the process thereof as part of a graduation project for Master degree in Industrial Design Engineering at the faculty of Industrial Design at the University of Technology in Delft.
The DAF Vehicle Investigation Equipment (DAVIE) diagnostics tool, specially developed for DAF Trucks, is used by mechanics in the workshops of its dealers or for road side assistance to diagnose malfunctions, change vehicle systems setup and perform repair and maintenance. Due to new legislation and as the truck’s configurations become more complex DAVIE needs to adapt accordingly.
The current DAVIE is focused on the truck’s internal components and rather disregarding the user’s workflow. This perspective needed to be altered to a more
User Centred Design approach and so the interaction needs to be reinterpreted to facilitate an efficient workflow. The new tool and design will be developed and implemented within DAF and Paccar and will find its way to all its dealers.
Within the design process, the navigation of the HMI design is defined according to use cases from the field and the
user research by carefully dissecting, merging and rearranging DAVIE functions with the mechanic’s workflow in mind. A quite complex tool became ‘simple’ in structure.
The design is consistent throughout all functions to reduce acclimatization for the mechanic.
The entire GUI is designed for use with touch screen and therefore has widely spaced, large enough buttons.
A system is developed to provide feedback about where the
user is in the navigation, what steps were taken, and provides accessibility to return to these steps. The
user can go ‘Home’ in one touch.
The way items in the content are presented to the mechanic forms an important part as such system appears in every DAVIE function. The hierarchical categorization is made transparent to the mechanic and consistent throughout all functions in order to facilitate understanding about interrelations. This aspect manifested in two ways: a categorised list in which loose items and their hierarchical relation can be identified and a schematic of the vehicle’s ECU’s (Electronic Control Units) representing the vehicle’s ECU structure.
An easy accessible system to acquire background or detailed information is developed to supplement the mechanics knowledge.
To provide transparency towards DAVIE’s connection to the network and truck, a status display is developed representing the actual parts, configuration and connection status.
Pop-ups were developed to present procedures which the mechanic can perform on the vehicle. These along with the rest of the tool’s content are written by the DAF authoring environment and so providing content (knowledge) to the tool for the mechanics. Dialog boxes (pop-ups) present warnings, questions or progress of processes to the
user. The mechanic always knows where he is through half…
Advisors/Committee Members: Vermeeren, A.P.O.S., Van Mourik, F..
Subjects/Keywords: Human Machine Interaction (HMI); Graphical User Interface (GUI); Usability Test; Diagnosis; Mechanic
Record Details
Similar Records
Cite
Share »
Record Details
Similar Records
Cite
« Share
❌
APA ·
Chicago ·
MLA ·
Vancouver ·
CSE |
Export
to Zotero / EndNote / Reference
Manager
APA (6th Edition):
Oude Egberink, J. (2010). Diagnostic tool interaction design for DAF and Paccar mechanics:. (Masters Thesis). Delft University of Technology. Retrieved from http://resolver.tudelft.nl/uuid:629ac832-b97e-4bc9-963d-3ee3a06c4a9f
Chicago Manual of Style (16th Edition):
Oude Egberink, J. “Diagnostic tool interaction design for DAF and Paccar mechanics:.” 2010. Masters Thesis, Delft University of Technology. Accessed October 24, 2019.
http://resolver.tudelft.nl/uuid:629ac832-b97e-4bc9-963d-3ee3a06c4a9f.
MLA Handbook (7th Edition):
Oude Egberink, J. “Diagnostic tool interaction design for DAF and Paccar mechanics:.” 2010. Web. 24 Oct 2019.
Vancouver:
Oude Egberink J. Diagnostic tool interaction design for DAF and Paccar mechanics:. [Internet] [Masters thesis]. Delft University of Technology; 2010. [cited 2019 Oct 24].
Available from: http://resolver.tudelft.nl/uuid:629ac832-b97e-4bc9-963d-3ee3a06c4a9f.
Council of Science Editors:
Oude Egberink J. Diagnostic tool interaction design for DAF and Paccar mechanics:. [Masters Thesis]. Delft University of Technology; 2010. Available from: http://resolver.tudelft.nl/uuid:629ac832-b97e-4bc9-963d-3ee3a06c4a9f
◁ [1] [2] [3] [4] [5] [6] [7] [8] ▶
. 
Open Access Theses and Dissertations
