subject:(flue gases)

Hong Kong University of Science and Technology

1. Sabbaghi, Aghil. Development of transition metal-loaded Zr-SBA-15 catalysts for the selective catalytic reduction of NO with propane in lean-burn engine exhaust.

Degree: 2015, Hong Kong University of Science and Technology

URL: https://doi.org/10.14711/thesis-b1552185 ; http://repository.ust.hk/ir/bitstream/1783.1-80139/1/th_redirect.html

► Contribution of nitrogen oxides (NOx) to global warming, acid rain formation and the production of smog and ground level ozone has led to many attempts… (more)

▼ Contribution of nitrogen oxides (NOx) to global warming, acid rain formation and the production of smog and ground level ozone has led to many attempts to reduce their emission. Among various approaches, selective catalytic reduction of NO with hydrocarbon (HC-SCR) has been known as an effective and the simplest method for NO reduction. This study was aimed to develop the catalytic system that active for the selective reduction of NO with C₃H₈ under lean-burn condition. A high Zr-loaded SBA-15 mesoporous material (32.1 wt%) with high surface area (548m².g^-1), well-ordered structure and high surface acidity (136 μmol. g^-1) was prepared by a novel direct-post synthesis technique (DP). Different catalytic systems were prepared by loading of various metals such as Ni, Co, Fe, Cu, Ga, Ag and Fe on the developed support. Among them, Ni and Co catalysts supported on Zr-SBADP2 exhibited promising results for NO reduction. Ni5/Zr-SBADP2 exhibited 17%, 34% and 47% N₂ yield at 350, 400 and 450℃, respectively, in the absence of the water vapor. However, the presence of the water vapor caused a slight decrease in NO reduction. The NO conversion to N2 decreased from 47% to 29% in the presence of 7 vol% of water vapor at 450℃. Moreover, a complete conversion of NO was achieved over Ni2.5/Zr-SBADP2 at 450℃ when propane concentration was increased from 500 ppm to 1750 ppm. Co catalysts supported on Zr- SBA-15 showed better activity compared to those observed over the Ni5/Zr-SBADP2 catalyst. The NO reduction activity improved significantly at low temperatures and the active temperature window broadened as well. Co2/Zr-SBADP2 exhibited 54%, 70 % and 60% N₂ yield in the absence of water vapor at 350, 400 and 450℃, respectively. Presence of water vapor not only did not suppress the NO conversion efficiency, but also significantly increased the N₂ yield at relatively low temperatures. In the presence of water vapor, the catalyst performance increased from 18% to 34% and 54% to 70% at 300 and 350℃, respectively. Furthermore, hydrothermal and long-term stability study indicated that both catalysts could retain their performances after being used under hydrothermal condition and maintain the efficiency of NOx reduction for a prolonged period without considerable deactivation.

Subjects/Keywords: Nitrogen oxides; Catalysis; Flue gases; Purification

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Sabbaghi, A. (2015). Development of transition metal-loaded Zr-SBA-15 catalysts for the selective catalytic reduction of NO with propane in lean-burn engine exhaust. (Thesis). Hong Kong University of Science and Technology. Retrieved from https://doi.org/10.14711/thesis-b1552185 ; http://repository.ust.hk/ir/bitstream/1783.1-80139/1/th_redirect.html

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Sabbaghi, Aghil. “Development of transition metal-loaded Zr-SBA-15 catalysts for the selective catalytic reduction of NO with propane in lean-burn engine exhaust.” 2015. Thesis, Hong Kong University of Science and Technology. Accessed December 06, 2019. https://doi.org/10.14711/thesis-b1552185 ; http://repository.ust.hk/ir/bitstream/1783.1-80139/1/th_redirect.html.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Sabbaghi, Aghil. “Development of transition metal-loaded Zr-SBA-15 catalysts for the selective catalytic reduction of NO with propane in lean-burn engine exhaust.” 2015. Web. 06 Dec 2019.

Vancouver:

Sabbaghi A. Development of transition metal-loaded Zr-SBA-15 catalysts for the selective catalytic reduction of NO with propane in lean-burn engine exhaust. [Internet] [Thesis]. Hong Kong University of Science and Technology; 2015. [cited 2019 Dec 06]. Available from: https://doi.org/10.14711/thesis-b1552185 ; http://repository.ust.hk/ir/bitstream/1783.1-80139/1/th_redirect.html.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Sabbaghi A. Development of transition metal-loaded Zr-SBA-15 catalysts for the selective catalytic reduction of NO with propane in lean-burn engine exhaust. [Thesis]. Hong Kong University of Science and Technology; 2015. Available from: https://doi.org/10.14711/thesis-b1552185 ; http://repository.ust.hk/ir/bitstream/1783.1-80139/1/th_redirect.html

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

University of Tasmania

2. Quraishi, T A(Tauseef Ahmad). Emissions from residential wood-burning heaters : a study of the problem, its measurement and control, and the determination of some emission factors.

Degree: 1987, University of Tasmania

URL: https://eprints.utas.edu.au/21304/1/whole_QuraishiTauseefAhmad1988_thesis.pdf

► In Australia there has been a sharp increase in residential wood-heating since the late 1970s, and the trend is expected to continue for some years.… (more)

▼ In Australia there has been a sharp increase in residential wood-heating since the late 1970s, and the trend is expected to continue for some years. Overseas research has shown that, under certain conditions, wood-heating can be a source of serious air pollution problems. The particulates resulting from wood-burning appliances are primarily organic in nature and, being in the respirable size range, can cause a variety of health ailments including cancer. The reaction of affected communities overseas has been varied. New Zealand followed the British example by allowing Christchurch to be declared a Clean Air Zone, but the results are not comparable to those achieved in Britain. In the United States, the Environmental Protection Agency has proposed a new source performance standard for wood-burning appliances which will become effective in July 1988. However, a number of control measures are already in force in several states and towns. In Europe, voluntary performance certification of appliances occurs in the Netherlands and Switzerland; and fire insurance premiums are linked to regular inspections and maintenance in France. In Australia, there is currently no co-ordinated control strategy to deal with this potential problem. Only the New South Wales Clean Air Act gives limited powers to local councils. Recently some brochures on wood-heater smoke reduction have been published and are available in some states. A standard measurement technique is of vital importance in controlling pollution. In wood-heater applications this has been lacking and the task of its development is made difficult by the non-discrete nature of the particulates in wood-smoke as well as the variations in the wood-burning process. An assortment of methods have been used to measure particulate emissions from wood-heaters. Oregon Method 7 was the first "standard method" for this source, and is a modification of EPA Method 5. The ASTM has proposed a dilution tunnel method which is finding popular support; it has been accepted by the New Zealand Clean Air Council as the \Standard Method, and also by the US EPA. Another dilution method is the Condar Method which has been accepted by the Oregon DEQ as equivalent to OM-7. This is a very simple and relatively inexpensive method which can identify periods of high emissions during a burn. This method was used in the experimental part of this study. Seventy three tests were conducted on two models of heaters (one catalytic and the other non-catalytic) using three types of fuel wood and varying fuel loads and burn rates. Statistical analysis revealed no difference between the catalytic and the non-catalytic models and no effect of varying burn rates on emissions; emissions increased with larger fuel loads for one fuel wood type, whereas for the other two types there was no significant increase. Correlations between particulate emissions and average flue gas concentrations of 02, co2, and CO were very poor. Particulate…

Subjects/Keywords: Stoves; Wood; Stoves; Wood; Flue gases; Flue gases

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Quraishi, T. A. A. (1987). Emissions from residential wood-burning heaters : a study of the problem, its measurement and control, and the determination of some emission factors. (Thesis). University of Tasmania. Retrieved from https://eprints.utas.edu.au/21304/1/whole_QuraishiTauseefAhmad1988_thesis.pdf

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Quraishi, T A(Tauseef Ahmad). “Emissions from residential wood-burning heaters : a study of the problem, its measurement and control, and the determination of some emission factors.” 1987. Thesis, University of Tasmania. Accessed December 06, 2019. https://eprints.utas.edu.au/21304/1/whole_QuraishiTauseefAhmad1988_thesis.pdf.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Quraishi, T A(Tauseef Ahmad). “Emissions from residential wood-burning heaters : a study of the problem, its measurement and control, and the determination of some emission factors.” 1987. Web. 06 Dec 2019.

Vancouver:

Quraishi TAA. Emissions from residential wood-burning heaters : a study of the problem, its measurement and control, and the determination of some emission factors. [Internet] [Thesis]. University of Tasmania; 1987. [cited 2019 Dec 06]. Available from: https://eprints.utas.edu.au/21304/1/whole_QuraishiTauseefAhmad1988_thesis.pdf.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Quraishi TAA. Emissions from residential wood-burning heaters : a study of the problem, its measurement and control, and the determination of some emission factors. [Thesis]. University of Tasmania; 1987. Available from: https://eprints.utas.edu.au/21304/1/whole_QuraishiTauseefAhmad1988_thesis.pdf

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

The Ohio State University

3. Beaver, Lamont E. Hydrodynamics and flue gas desulfurization characteristics of a three-phase, gas-continuous, cocurrent semifluidized bed .

Degree: PhD, Graduate School, 1983, The Ohio State University

URL: http://rave.ohiolink.edu/etdc/view?acc_num=osu1487237283889564

Subjects/Keywords: Engineering; Flue gases; Hydrodynamics

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Beaver, L. E. (1983). Hydrodynamics and flue gas desulfurization characteristics of a three-phase, gas-continuous, cocurrent semifluidized bed . (Doctoral Dissertation). The Ohio State University. Retrieved from http://rave.ohiolink.edu/etdc/view?acc_num=osu1487237283889564

Chicago Manual of Style (16^th Edition):

Beaver, Lamont E. “Hydrodynamics and flue gas desulfurization characteristics of a three-phase, gas-continuous, cocurrent semifluidized bed .” 1983. Doctoral Dissertation, The Ohio State University. Accessed December 06, 2019. http://rave.ohiolink.edu/etdc/view?acc_num=osu1487237283889564.

MLA Handbook (7^th Edition):

Beaver, Lamont E. “Hydrodynamics and flue gas desulfurization characteristics of a three-phase, gas-continuous, cocurrent semifluidized bed .” 1983. Web. 06 Dec 2019.

Vancouver:

Beaver LE. Hydrodynamics and flue gas desulfurization characteristics of a three-phase, gas-continuous, cocurrent semifluidized bed . [Internet] [Doctoral dissertation]. The Ohio State University; 1983. [cited 2019 Dec 06]. Available from: http://rave.ohiolink.edu/etdc/view?acc_num=osu1487237283889564.

Council of Science Editors:

Beaver LE. Hydrodynamics and flue gas desulfurization characteristics of a three-phase, gas-continuous, cocurrent semifluidized bed . [Doctoral Dissertation]. The Ohio State University; 1983. Available from: http://rave.ohiolink.edu/etdc/view?acc_num=osu1487237283889564

Durban University of Technology

4. Bhola, Virthie Kemraj. Mitigation of carbon dioxide from synthetic flue gas using indigenous microalgae.

Degree: 2017, Durban University of Technology

URL: http://hdl.handle.net/10321/2658

►

Submitted in fulfillment of the requirements for the degree of Doctor of Philosophy: Biotechnology, Durban University of Technology, Durban, South Africa, 2017.

Fossil carbon dioxide… (more)

▼

Submitted in fulfillment of the requirements for the degree of Doctor of Philosophy: Biotechnology, Durban University of Technology, Durban, South Africa, 2017.

Fossil carbon dioxide emissions can be biologically fixed which could lead to the development of technologies that are both economically and environmentally friendly. Carbon dioxide, which is the basis for the formation of complex sugars by green plants and microalgae through photosynthesis, has been shown to significantly increase the growth rates of certain microalgal species. Microalgae possess a greater capacity to fix CO2 compared to terrestrial plants. Selection of appropriate microalgal strains is based on the CO2 fixation and tolerance capability, both of which are a function of biomass productivity. Microalgal biomass could thus represent a natural sink for carbon. Furthermore, such systems could minimise capital and operating costs, complexity, and energy required to transport CO2 to other places. Prior to the development of an effective CO2 mitigation process, an essential step should be to identify the most CO2-tolerant indigenous strains. The first phase of this study therefore focused on the isolation, identification and screening of carboxyphilic microalgal strains (indigenous to the KwaZulu-Natal province in South Africa). In order to identify a high carbon-sequestering microalgal strain, the physiological effect of different concentrations of carbon sources on microalgae growth was investigated. Five indigenous strains (I-1, I-2, I-3, I-4 and I-5) and a reference strain (I-0: Coccolithus pelagicus 913/3) were subjected to CO2 concentrations of 0.03 - 15% and NaHCO3 of 0.05 - 2 g/1. The logistic model was applied for data fitting, as well as for estimation of the maximum growth rate (µmax) and the biomass carrying capacity (Bmax). Amongst the five indigenous strains, I-3 was similar to the reference strain with regards to biomass production values. The Bmax of I-3 significantly increased from 0.214 to 0.828 g/l when the CO2 concentration was increased from 0.03 to 15% (r = 0.955, p = 0.012). Additionally, the Bmax of I-3 increased with increasing NaHCO3 concentrations (r = 0.885, p = 0.046) and was recorded at 0.153 g/l (at 0.05 g/l) and 0.774 g/l (at 2 g/l). Relative electron transport rate (rETR) and maximum quantum yield (Fv/Fm) were also applied to assess the impact of elevated carbon sources on the microalgal cells at the physiological level. Isolate I-3 displayed the highest rETR confirming its tolerance to higher quantities of carbon. Additionally, the decline in Fv/Fm with increasing carbon was similar for strains I-3 and the reference strain (I-0). Based on partial 28S ribosomal DNA gene sequencing, strain I-3 was found to be homologous to the ribosomal genes of Chlorella sp. The influence of abiotic parameters (light intensity and light:dark cycles) and varying nutrient concentrations on the growth of the highly CO2 tolerant Chlorella sp. was thereafter investigated. It was found that an increase in light intensity from…

Advisors/Committee Members: Bux, Faizal, Swalaha, Feroz Mahomed.

Subjects/Keywords: Biotechnology; Carbon dioxide mitigation; Flue gases; Microalgae – Biotechnology

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Bhola, V. K. (2017). Mitigation of carbon dioxide from synthetic flue gas using indigenous microalgae. (Thesis). Durban University of Technology. Retrieved from http://hdl.handle.net/10321/2658

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Bhola, Virthie Kemraj. “Mitigation of carbon dioxide from synthetic flue gas using indigenous microalgae.” 2017. Thesis, Durban University of Technology. Accessed December 06, 2019. http://hdl.handle.net/10321/2658.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Bhola, Virthie Kemraj. “Mitigation of carbon dioxide from synthetic flue gas using indigenous microalgae.” 2017. Web. 06 Dec 2019.

Vancouver:

Bhola VK. Mitigation of carbon dioxide from synthetic flue gas using indigenous microalgae. [Internet] [Thesis]. Durban University of Technology; 2017. [cited 2019 Dec 06]. Available from: http://hdl.handle.net/10321/2658.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Bhola VK. Mitigation of carbon dioxide from synthetic flue gas using indigenous microalgae. [Thesis]. Durban University of Technology; 2017. Available from: http://hdl.handle.net/10321/2658

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Montana State University

5. Pedersen, James George. A regenerable process for the removal of SO2 from flue gases.

Degree: College of Engineering, 1973, Montana State University

URL: https://scholarworks.montana.edu/xmlui/handle/1/5881

Subjects/Keywords: Sulfur dioxide; Flue gases Purification.

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Pedersen, J. G. (1973). A regenerable process for the removal of SO2 from flue gases. (Thesis). Montana State University. Retrieved from https://scholarworks.montana.edu/xmlui/handle/1/5881

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Pedersen, James George. “A regenerable process for the removal of SO2 from flue gases.” 1973. Thesis, Montana State University. Accessed December 06, 2019. https://scholarworks.montana.edu/xmlui/handle/1/5881.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Pedersen, James George. “A regenerable process for the removal of SO2 from flue gases.” 1973. Web. 06 Dec 2019.

Vancouver:

Pedersen JG. A regenerable process for the removal of SO2 from flue gases. [Internet] [Thesis]. Montana State University; 1973. [cited 2019 Dec 06]. Available from: https://scholarworks.montana.edu/xmlui/handle/1/5881.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Pedersen JG. A regenerable process for the removal of SO2 from flue gases. [Thesis]. Montana State University; 1973. Available from: https://scholarworks.montana.edu/xmlui/handle/1/5881

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Aristotle University Of Thessaloniki (AUTH); Αριστοτέλειο Πανεπιστήμιο Θεσσαλονίκης (ΑΠΘ)

6. Kokkinos, Evgenios. Μελέτη απομάκρυνσης υδραργύρου από νερό και απαέρια.

Degree: 2017, Aristotle University Of Thessaloniki (AUTH); Αριστοτέλειο Πανεπιστήμιο Θεσσαλονίκης (ΑΠΘ)

URL: http://hdl.handle.net/10442/hedi/42266

►

The aim of this PhD thesis was the synthesis of an adsorbent with high negative surface charge density and high specific surface area for mercury,… (more)

▼

The aim of this PhD thesis was the synthesis of an adsorbent with high negative surface charge density and high specific surface area for mercury, and other heavy metals, removal from drinking water and lignite combustion flue gases. Moreover, an additional target of this study was the determination of mercury’s adsorption mechanism, with emphasis on the oxidation process of its elemental form in flue gases. For this purpose, iron oxy-hydroxides (FeOOH) and iron manganese oxy-hydroxides (Fe/MnOOH) were examined, the synthesis of which was made according to the optimization-maximization of their specific surface area and negative surface charge density. The evaluation of adsorbents was performed according to their capacity at mercury’s regulation limit (QRL), meaning their yield at an equilibrium concentration equal to either the drinking limit of 1 μg Hg/L (Q1) or the emission limit of 50 μg Hg/m3 (Q50).The experimental data showed that Fe/MnOOH have higher negative charge density and strong oxidizing effect, due to the partial replacement of Fe(III) with Mn(IV) in FeOOH structure. The optimization of negative surface charge and oxidation effect of Fe/MnOOH was achieved by their synthesis in the pH range 4-12 at maximum redox potential, which was ensured by Mn(VII) excess (2-5 mg/L). Mercury removal capacity of Fe/MnOOH is proportional mainly to their negative surface charge density, while the effect of surface area appears to be limited. Fe/MnOOH are also capable of removing mercury at residual concentrations lower than drinking water’s and flue gases’ limit. In contrast, FeOOH typically have an order of magnitude lower capacity in aqueous matrix, due to the significantly reduced negative charge density and surface area. The corresponding capacity of mercury removal in gaseous matrix is almost negligible due to the absence of their oxidative ability, as the main form of mercury in the flue gases is Hg0.The evaluation of materials through isotherms adsorption in NSF water, the composition of which resembles that of a natural-like water with equilibrium pH 7, revealed that the maximum capacity at regulation limit Q1 was 0.481 μg Hg/mg TMFx and was achieved by Fe/MnOOH synthesized at pH 9 (TMFx). Rapid Small Scale Column Tests (RSSCTs), which simulate a full-scale system, in NSF water showed an adsorption capacity of Q1 = 2.5 μg Hg/mg of TMFx. The investigation of mercury adsorption mechanism by thermodynamic study showed the occurrence of a spontaneous and exothermic chemisorption (ΔH° = -19.3 kJ/mol). A notably high capacity of Q50 = 13.9 mg Hg/g TMFx was accomplished in a fixed bed reactor at 120 °C and 40 ms EBCT. Another feature was the decrease of capacity with the increase of temperature from 120 °C to 150 °C due to the exothermic nature of the process and the degradation of the TMFx surface properties.

Ο σκοπός της παρούσας διδακτορικής διατριβής ήταν η ανάπτυξη ενός προσροφητικού με υψηλή πυκνότητα αρνητικού επιφανειακού φορτίου και υψηλή ειδική επιφάνεια με στόχο τόσο την απομάκρυνση υδραργύρου και άλλων…

Subjects/Keywords: Υδράργυρος; Προσρόφηση; Νερό; Απαέρια; Mercury; Αdsorption; Water; Flue gases

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Kokkinos, E. (2017). Μελέτη απομάκρυνσης υδραργύρου από νερό και απαέρια. (Thesis). Aristotle University Of Thessaloniki (AUTH); Αριστοτέλειο Πανεπιστήμιο Θεσσαλονίκης (ΑΠΘ). Retrieved from http://hdl.handle.net/10442/hedi/42266

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Kokkinos, Evgenios. “Μελέτη απομάκρυνσης υδραργύρου από νερό και απαέρια.” 2017. Thesis, Aristotle University Of Thessaloniki (AUTH); Αριστοτέλειο Πανεπιστήμιο Θεσσαλονίκης (ΑΠΘ). Accessed December 06, 2019. http://hdl.handle.net/10442/hedi/42266.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Kokkinos, Evgenios. “Μελέτη απομάκρυνσης υδραργύρου από νερό και απαέρια.” 2017. Web. 06 Dec 2019.

Vancouver:

Kokkinos E. Μελέτη απομάκρυνσης υδραργύρου από νερό και απαέρια. [Internet] [Thesis]. Aristotle University Of Thessaloniki (AUTH); Αριστοτέλειο Πανεπιστήμιο Θεσσαλονίκης (ΑΠΘ); 2017. [cited 2019 Dec 06]. Available from: http://hdl.handle.net/10442/hedi/42266.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Kokkinos E. Μελέτη απομάκρυνσης υδραργύρου από νερό και απαέρια. [Thesis]. Aristotle University Of Thessaloniki (AUTH); Αριστοτέλειο Πανεπιστήμιο Θεσσαλονίκης (ΑΠΘ); 2017. Available from: http://hdl.handle.net/10442/hedi/42266

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

New Jersey Institute of Technology

7. Lu, Ching-Hwang. The dry removal process of sulphur dioxide from flue gases using aluminum oxide.

Degree: MSin Chemical Engineering - (M.S.), Chemical Engineering and Chemistry, 1984, New Jersey Institute of Technology

URL: https://digitalcommons.njit.edu/theses/1420

► Oxidation of sulfur dioxide to sulfur trioxide and absorption on aluminum oxide pellet as a mean of removing sulfur dioxide from flue gas was… (more)

Subjects/Keywords: Flue gases – Desulphurization; Chemical Engineering

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Lu, C. (1984). The dry removal process of sulphur dioxide from flue gases using aluminum oxide. (Thesis). New Jersey Institute of Technology. Retrieved from https://digitalcommons.njit.edu/theses/1420

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Lu, Ching-Hwang. “The dry removal process of sulphur dioxide from flue gases using aluminum oxide.” 1984. Thesis, New Jersey Institute of Technology. Accessed December 06, 2019. https://digitalcommons.njit.edu/theses/1420.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Lu, Ching-Hwang. “The dry removal process of sulphur dioxide from flue gases using aluminum oxide.” 1984. Web. 06 Dec 2019.

Vancouver:

Lu C. The dry removal process of sulphur dioxide from flue gases using aluminum oxide. [Internet] [Thesis]. New Jersey Institute of Technology; 1984. [cited 2019 Dec 06]. Available from: https://digitalcommons.njit.edu/theses/1420.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Lu C. The dry removal process of sulphur dioxide from flue gases using aluminum oxide. [Thesis]. New Jersey Institute of Technology; 1984. Available from: https://digitalcommons.njit.edu/theses/1420

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

New Jersey Institute of Technology

8. Cheng, Fred Jyh-Woei. Mathematical modeling of jet bubbling reactor.

Degree: MSin Chemical Engineering - (M.S.), Chemical Engineering and Chemistry, 1981, New Jersey Institute of Technology

URL: https://digitalcommons.njit.edu/theses/1465

► A jet bubbling reactor for flue gas desulfurization is described by a mathematical model with the concept of two-stages mass transfer with chemical reactions.… (more)

Subjects/Keywords: Flue gases – Desulphurization.; Chemical Engineering

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Cheng, F. J. (1981). Mathematical modeling of jet bubbling reactor. (Thesis). New Jersey Institute of Technology. Retrieved from https://digitalcommons.njit.edu/theses/1465

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Cheng, Fred Jyh-Woei. “Mathematical modeling of jet bubbling reactor.” 1981. Thesis, New Jersey Institute of Technology. Accessed December 06, 2019. https://digitalcommons.njit.edu/theses/1465.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Cheng, Fred Jyh-Woei. “Mathematical modeling of jet bubbling reactor.” 1981. Web. 06 Dec 2019.

Vancouver:

Cheng FJ. Mathematical modeling of jet bubbling reactor. [Internet] [Thesis]. New Jersey Institute of Technology; 1981. [cited 2019 Dec 06]. Available from: https://digitalcommons.njit.edu/theses/1465.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Cheng FJ. Mathematical modeling of jet bubbling reactor. [Thesis]. New Jersey Institute of Technology; 1981. Available from: https://digitalcommons.njit.edu/theses/1465

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Texas A&M University

9. Berryman, Charles Wayne. The utilization of flue gas desulfurization waste by-products in construction brick.

Degree: MS, construction management, 2012, Texas A&M University

URL: http://hdl.handle.net/1969.1/ETD-TAMU-1992-THESIS-B534

► Millions of tons of waste by-products from Texas coal burning plants are produced each year. Two common byproducts are the fuel ashes and calcium sulfate… (more)

Subjects/Keywords: construction management.; Major construction management.; Brickmaking.; Flue gases - Desulfurization.; Waste products as building materials.

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Berryman, C. W. (2012). The utilization of flue gas desulfurization waste by-products in construction brick. (Masters Thesis). Texas A&M University. Retrieved from http://hdl.handle.net/1969.1/ETD-TAMU-1992-THESIS-B534

Chicago Manual of Style (16^th Edition):

Berryman, Charles Wayne. “The utilization of flue gas desulfurization waste by-products in construction brick.” 2012. Masters Thesis, Texas A&M University. Accessed December 06, 2019. http://hdl.handle.net/1969.1/ETD-TAMU-1992-THESIS-B534.

MLA Handbook (7^th Edition):

Berryman, Charles Wayne. “The utilization of flue gas desulfurization waste by-products in construction brick.” 2012. Web. 06 Dec 2019.

Vancouver:

Berryman CW. The utilization of flue gas desulfurization waste by-products in construction brick. [Internet] [Masters thesis]. Texas A&M University; 2012. [cited 2019 Dec 06]. Available from: http://hdl.handle.net/1969.1/ETD-TAMU-1992-THESIS-B534.

Council of Science Editors:

Berryman CW. The utilization of flue gas desulfurization waste by-products in construction brick. [Masters Thesis]. Texas A&M University; 2012. Available from: http://hdl.handle.net/1969.1/ETD-TAMU-1992-THESIS-B534

Univerzitet u Beogradu

10. Živković, Nikola V. Регенеративни поступци уклањања сумпор-диоксида из димних гасова - избор и одређивање термофизичких својстава нових растварача и њихових смеша и моделовање процеса.

Degree: Tehnološko-metalurški fakultet, 2016, Univerzitet u Beogradu

URL: https://fedorabg.bg.ac.rs/fedora/get/o:11336/bdef:Content/get

►

Хемија и Хемијска технологија - Хемијско инжењерство / Chemistry and Chemical Technology - Chemical engineering

Сумпор-диоксид је гас стаклене баште са индиректним дејством, који настаје… (more)

▼

Хемија и Хемијска технологија - Хемијско инжењерство / Chemistry and Chemical Technology - Chemical engineering

Сумпор-диоксид је гас стаклене баште са индиректним дејством, који настаје сагоревањем фосилних горива (угља или нафте), која имају удео сумпора у свом саставу. У Републици Србији ови енергенти су доминантни у процесу производње електричне енергије у оквиру Јавног предузећа Електропривреда Србије (ЈП ЕПС). Већ дуго времена је познато да сумпор-диоксид има штетан утицај на људско здравље, животну околину и на климатске промене. У погледу штетног утицаја на људско здравље, сумпор-диоксид узрокује астму, смањује капацитет плућа и узрокује запаљенске процесе респираторног тракта. У погледу штетног дејства на околину, утиче на закисељавање терена и подземних вода, уништава вегетацију и штетно делује на грађевинске објекте. Појава хлађења атмосфере, услед формирања честица сулфата, један је од од мноштва непожељних ефеката на промену климе. Процеси за уклањање сумпорних оксида из димних гасова у енергетици и процесној индустрији, добијаjу на значају порастом свести о значају њиховог уклањања. Паралелно је растао и значај доношења законске регулативе која ће регулисати ову проблематику, првенствено у индустријски најразвијенијим земљама. Иако је у практичној индустријској употреби, уназад већ неколико деценија, мокри кречњачки поступак још увек најзаступљенији процес за одсумпоравање димних гасова, у последње време, све чешћу примену имају процеси са хемијском и физичком апсорпцијом и термичком регенерацијом солвента. Предности регенеративних апсорпционих поступака су ефикасност и еколошки аспекти...

Advisors/Committee Members: Šerbanović, Slobodan..

Subjects/Keywords: sulfur dioxide; flue gas; greenhouse gases; thermal power; density; viscosity; refractive index; absorption; modeling.

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Živković, N. V. (2016). Регенеративни поступци уклањања сумпор-диоксида из димних гасова - избор и одређивање термофизичких својстава нових растварача и њихових смеша и моделовање процеса. (Thesis). Univerzitet u Beogradu. Retrieved from https://fedorabg.bg.ac.rs/fedora/get/o:11336/bdef:Content/get

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Živković, Nikola V. “Регенеративни поступци уклањања сумпор-диоксида из димних гасова - избор и одређивање термофизичких својстава нових растварача и њихових смеша и моделовање процеса.” 2016. Thesis, Univerzitet u Beogradu. Accessed December 06, 2019. https://fedorabg.bg.ac.rs/fedora/get/o:11336/bdef:Content/get.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Živković, Nikola V. “Регенеративни поступци уклањања сумпор-диоксида из димних гасова - избор и одређивање термофизичких својстава нових растварача и њихових смеша и моделовање процеса.” 2016. Web. 06 Dec 2019.

Vancouver:

Živković NV. Регенеративни поступци уклањања сумпор-диоксида из димних гасова - избор и одређивање термофизичких својстава нових растварача и њихових смеша и моделовање процеса. [Internet] [Thesis]. Univerzitet u Beogradu; 2016. [cited 2019 Dec 06]. Available from: https://fedorabg.bg.ac.rs/fedora/get/o:11336/bdef:Content/get.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Živković NV. Регенеративни поступци уклањања сумпор-диоксида из димних гасова - избор и одређивање термофизичких својстава нових растварача и њихових смеша и моделовање процеса. [Thesis]. Univerzitet u Beogradu; 2016. Available from: https://fedorabg.bg.ac.rs/fedora/get/o:11336/bdef:Content/get

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Georgia Tech

11. Pacheco Rodriguez, Diana Marisol. Aminosilane-functionalized cellulosic polymers for increased carbon dioxide sorption.

Degree: MS, Chemical Engineering, 2010, Georgia Tech

URL: http://hdl.handle.net/1853/42722

► Improvement of the efficiency of carbon dioxide (CO2) separation from flue gases has been identified as a high-priority research area to reduce the total energy… (more)

Subjects/Keywords: Cellulose acetate; CO2 sorption; Aminosilanes; Grafting; Separation (Technology); Adsorption; Flue gases; Sorbents; Carbon dioxide

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Pacheco Rodriguez, D. M. (2010). Aminosilane-functionalized cellulosic polymers for increased carbon dioxide sorption. (Masters Thesis). Georgia Tech. Retrieved from http://hdl.handle.net/1853/42722

Chicago Manual of Style (16^th Edition):

Pacheco Rodriguez, Diana Marisol. “Aminosilane-functionalized cellulosic polymers for increased carbon dioxide sorption.” 2010. Masters Thesis, Georgia Tech. Accessed December 06, 2019. http://hdl.handle.net/1853/42722.

MLA Handbook (7^th Edition):

Pacheco Rodriguez, Diana Marisol. “Aminosilane-functionalized cellulosic polymers for increased carbon dioxide sorption.” 2010. Web. 06 Dec 2019.

Vancouver:

Pacheco Rodriguez DM. Aminosilane-functionalized cellulosic polymers for increased carbon dioxide sorption. [Internet] [Masters thesis]. Georgia Tech; 2010. [cited 2019 Dec 06]. Available from: http://hdl.handle.net/1853/42722.

Council of Science Editors:

Pacheco Rodriguez DM. Aminosilane-functionalized cellulosic polymers for increased carbon dioxide sorption. [Masters Thesis]. Georgia Tech; 2010. Available from: http://hdl.handle.net/1853/42722

Georgia Tech

12. Drese, Jeffrey Hayden. The design, synthesis, and characterization of aminosilica adsorbents for CO2 capture from dilute sources.

Degree: PhD, Chemical Engineering, 2010, Georgia Tech

URL: http://hdl.handle.net/1853/42829

► The use of novel hyperbranched aminosilica (HAS) materials created through the ring-opening polymerization of aziridine from mesoporous silica supports was proposed for the adsorption of… (more)

Subjects/Keywords: CO2 capture; Adsorption; Mesoporous silica; Ring-opening polymerization; Silica; Adsorption; Flue gases; Amines

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Drese, J. H. (2010). The design, synthesis, and characterization of aminosilica adsorbents for CO2 capture from dilute sources. (Doctoral Dissertation). Georgia Tech. Retrieved from http://hdl.handle.net/1853/42829

Chicago Manual of Style (16^th Edition):

Drese, Jeffrey Hayden. “The design, synthesis, and characterization of aminosilica adsorbents for CO2 capture from dilute sources.” 2010. Doctoral Dissertation, Georgia Tech. Accessed December 06, 2019. http://hdl.handle.net/1853/42829.

MLA Handbook (7^th Edition):

Drese, Jeffrey Hayden. “The design, synthesis, and characterization of aminosilica adsorbents for CO2 capture from dilute sources.” 2010. Web. 06 Dec 2019.

Vancouver:

Drese JH. The design, synthesis, and characterization of aminosilica adsorbents for CO2 capture from dilute sources. [Internet] [Doctoral dissertation]. Georgia Tech; 2010. [cited 2019 Dec 06]. Available from: http://hdl.handle.net/1853/42829.

Council of Science Editors:

Drese JH. The design, synthesis, and characterization of aminosilica adsorbents for CO2 capture from dilute sources. [Doctoral Dissertation]. Georgia Tech; 2010. Available from: http://hdl.handle.net/1853/42829

Virginia Tech

13. Bell, Robert M. Mass flow and temperature measurements in the flue of a woodburning appliance.

Degree: MS, Mechanical Engineering, 1985, Virginia Tech

URL: http://hdl.handle.net/10919/34100

► The use of wood stoves for residential heating has been increasing over the past several years. This increased use of wood stoves has caused significant… (more)

Subjects/Keywords: Flue gases; LD5655.V855 1985.B444

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Bell, R. M. (1985). Mass flow and temperature measurements in the flue of a woodburning appliance. (Masters Thesis). Virginia Tech. Retrieved from http://hdl.handle.net/10919/34100

Chicago Manual of Style (16^th Edition):

Bell, Robert M. “Mass flow and temperature measurements in the flue of a woodburning appliance.” 1985. Masters Thesis, Virginia Tech. Accessed December 06, 2019. http://hdl.handle.net/10919/34100.

MLA Handbook (7^th Edition):

Bell, Robert M. “Mass flow and temperature measurements in the flue of a woodburning appliance.” 1985. Web. 06 Dec 2019.

Vancouver:

Bell RM. Mass flow and temperature measurements in the flue of a woodburning appliance. [Internet] [Masters thesis]. Virginia Tech; 1985. [cited 2019 Dec 06]. Available from: http://hdl.handle.net/10919/34100.

Council of Science Editors:

Bell RM. Mass flow and temperature measurements in the flue of a woodburning appliance. [Masters Thesis]. Virginia Tech; 1985. Available from: http://hdl.handle.net/10919/34100

14. Maitree Tanitichaowanan. Performance of an electrostatic precipitator designed for collection of soot particles from wood combustion .

Degree: Prince of Songkla University Faculty of Science (Physical Chemistry), 2005, Prince of Songkla University

URL: http://kb.psu.ac.th/psukb/handle/2553/1355

Subjects/Keywords: Electrostatic precipitation; Flue gases; Fly ash

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Tanitichaowanan, M. (2005). Performance of an electrostatic precipitator designed for collection of soot particles from wood combustion . (Thesis). Prince of Songkla University. Retrieved from http://kb.psu.ac.th/psukb/handle/2553/1355

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Tanitichaowanan, Maitree. “Performance of an electrostatic precipitator designed for collection of soot particles from wood combustion .” 2005. Thesis, Prince of Songkla University. Accessed December 06, 2019. http://kb.psu.ac.th/psukb/handle/2553/1355.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Tanitichaowanan, Maitree. “Performance of an electrostatic precipitator designed for collection of soot particles from wood combustion .” 2005. Web. 06 Dec 2019.

Vancouver:

Tanitichaowanan M. Performance of an electrostatic precipitator designed for collection of soot particles from wood combustion . [Internet] [Thesis]. Prince of Songkla University; 2005. [cited 2019 Dec 06]. Available from: http://kb.psu.ac.th/psukb/handle/2553/1355.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Tanitichaowanan M. Performance of an electrostatic precipitator designed for collection of soot particles from wood combustion . [Thesis]. Prince of Songkla University; 2005. Available from: http://kb.psu.ac.th/psukb/handle/2553/1355

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

University of Debrecen

15. Usman Aminu, Idris. Heat Recovery From Flue Gases at a Steam Boiler .

Degree: DE – Természettudományi és Technológiai Kar – Kémiai Intézet, University of Debrecen

URL: http://hdl.handle.net/2437/220223

► The consumption of energy in the world has doubled in the last thirty years and it keeps on increasing with about 1.5% – 2 %… (more)

Subjects/Keywords: Heat Recovery; Steam Boiler; Flue Gases

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Usman Aminu, I. (n.d.). Heat Recovery From Flue Gases at a Steam Boiler . (Thesis). University of Debrecen. Retrieved from http://hdl.handle.net/2437/220223

Note: this citation may be lacking information needed for this citation format:
No year of publication.
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Usman Aminu, Idris. “Heat Recovery From Flue Gases at a Steam Boiler .” Thesis, University of Debrecen. Accessed December 06, 2019. http://hdl.handle.net/2437/220223.

Note: this citation may be lacking information needed for this citation format:
No year of publication.
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Usman Aminu, Idris. “Heat Recovery From Flue Gases at a Steam Boiler .” Web. 06 Dec 2019.

Note: this citation may be lacking information needed for this citation format:
No year of publication.

Vancouver:

Usman Aminu I. Heat Recovery From Flue Gases at a Steam Boiler . [Internet] [Thesis]. University of Debrecen; [cited 2019 Dec 06]. Available from: http://hdl.handle.net/2437/220223.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
No year of publication.

Council of Science Editors:

Usman Aminu I. Heat Recovery From Flue Gases at a Steam Boiler . [Thesis]. University of Debrecen; Available from: http://hdl.handle.net/2437/220223

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
No year of publication.

University of New South Wales

16. Tio, Peng Hing. Flue gas desulphurisation.

Degree: Applied Science. Chemical Engineering, 1978, University of New South Wales

URL: http://handle.unsw.edu.au/1959.4/64717 ; https://unsworks.unsw.edu.au/fapi/datastream/unsworks:62750/SOURCE01?view=true

Subjects/Keywords: Desulfurization; Flue gases; Thesis Digitisation Program

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Tio, P. H. (1978). Flue gas desulphurisation. (Doctoral Dissertation). University of New South Wales. Retrieved from http://handle.unsw.edu.au/1959.4/64717 ; https://unsworks.unsw.edu.au/fapi/datastream/unsworks:62750/SOURCE01?view=true

Chicago Manual of Style (16^th Edition):

Tio, Peng Hing. “Flue gas desulphurisation.” 1978. Doctoral Dissertation, University of New South Wales. Accessed December 06, 2019. http://handle.unsw.edu.au/1959.4/64717 ; https://unsworks.unsw.edu.au/fapi/datastream/unsworks:62750/SOURCE01?view=true.

MLA Handbook (7^th Edition):

Tio, Peng Hing. “Flue gas desulphurisation.” 1978. Web. 06 Dec 2019.

Vancouver:

Tio PH. Flue gas desulphurisation. [Internet] [Doctoral dissertation]. University of New South Wales; 1978. [cited 2019 Dec 06]. Available from: http://handle.unsw.edu.au/1959.4/64717 ; https://unsworks.unsw.edu.au/fapi/datastream/unsworks:62750/SOURCE01?view=true.

Council of Science Editors:

Tio PH. Flue gas desulphurisation. [Doctoral Dissertation]. University of New South Wales; 1978. Available from: http://handle.unsw.edu.au/1959.4/64717 ; https://unsworks.unsw.edu.au/fapi/datastream/unsworks:62750/SOURCE01?view=true

Columbia University

17. Arellano Treviño, Martha Alejandra. A study of catalytic metals and alkaline metal oxides leading to the development of a stable Ru-doped Ni Dual Function Material for CO2 capture from flue gas and in-situ catalytic conversion to methane.

Degree: 2020, Columbia University

URL: https://doi.org/10.7916/d8-q7r5-9314

► Atmospheric CO2 concentrations are at their highest level on record. Scientific evidence has demonstrated a direct correlation between the rise of CO2 levels and an… (more)

▼ Atmospheric CO2 concentrations are at their highest level on record. Scientific evidence has demonstrated a direct correlation between the rise of CO2 levels and an increase of the global median temperature (~1°C higher than compared to the pre-industrial revolution times) due to the greenhouse gas effect. The change in climate due to this rapid increase of CO2 levels is already negatively affecting our ecosystem and lives, with unpredictable consequences in the future. The main source of anthropogenic CO2 emissions is attributed to the combustion of fossil fuels for energy production and transportation. Global indicators signal that carbon-intensive fuels will continue to be utilized as a main energy source despite the rising implementation of renewable energy sources. In order to curb CO2 emissions, several carbon dioxide capture, utilization and sequestration (CCUS) technologies have been suggested. The current state-of-the-art CO2 capture technology utilizes toxic and corrosive aqueous amine solutions that capture CO2 at room temperature but require heating above the water boiling point temperatures to separate CO2 from the amine solution; the latter of which is to be recycled. Once the CO2 is purified, it is necessary to transport it to its sequestration site or an upgrading processing plant. These are complicated schemes that involve many energy-intensive and costly processes. To address the shortcomings of these technologies, we propose a Dual Function Material (DFM) that both captures CO2 and catalytically converts it to methane in-situ. The DFM consists of a catalytic metal intimately in contact with an alkaline metal oxide supported on a high surface area carrier. The process operates within the flue gas at 320°C for both CO2 capture and methane generation upon the addition of renewable H2. The catalyst is required to methanate the adsorbed CO2 after the capture step is carried out in an O2 and steam-containing flue gas. Ruthenium, rhodium, and nickel are known CO2 methanation catalysts, provided they are in the reduced state. All three were compared for performance under DFM flue gas conditions. Ni is a preferred methanation catalyst based on price and activity; however, its inability to be reduced to its active state after experiencing O2-containing flue gas during the capture step was an outcome determined in this thesis. The performance of a variety of alkaline adsorbents (“Na2O”, CaO, “K2O” and MgO) and carriers (Al2O3, CeO2, CeO2/ZrO2 (CZO), Na-Zeolite-X (Na-X-Z), H-Mordenite Zeolite (H-M-Z), SiC, SiO2 and ZrO2-Y) were also studied. Selection of the best materials was based on CO2 capture capacity, net methane production and hydrogenation rates that were evaluated with thermogravimetric analysis and in fixed bed reactor tests. Rh and Ru DFMs were effective methanation catalysts with Ru being superior based on capture capacity, hydrogenation rate and price. Ru remained active towards methanation even after exposure to O2 and steam-containing simulated flue gas. Alkaline adsorbents, in…

Subjects/Keywords: Environmental engineering; Chemical engineering; Carbon dioxide mitigation; Flue gases; Methanation; Materials science

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Arellano Treviño, M. A. (2020). A study of catalytic metals and alkaline metal oxides leading to the development of a stable Ru-doped Ni Dual Function Material for CO2 capture from flue gas and in-situ catalytic conversion to methane. (Doctoral Dissertation). Columbia University. Retrieved from https://doi.org/10.7916/d8-q7r5-9314

Chicago Manual of Style (16^th Edition):

Arellano Treviño, Martha Alejandra. “A study of catalytic metals and alkaline metal oxides leading to the development of a stable Ru-doped Ni Dual Function Material for CO2 capture from flue gas and in-situ catalytic conversion to methane.” 2020. Doctoral Dissertation, Columbia University. Accessed December 06, 2019. https://doi.org/10.7916/d8-q7r5-9314.

MLA Handbook (7^th Edition):

Arellano Treviño, Martha Alejandra. “A study of catalytic metals and alkaline metal oxides leading to the development of a stable Ru-doped Ni Dual Function Material for CO2 capture from flue gas and in-situ catalytic conversion to methane.” 2020. Web. 06 Dec 2019.

Vancouver:

Arellano Treviño MA. A study of catalytic metals and alkaline metal oxides leading to the development of a stable Ru-doped Ni Dual Function Material for CO2 capture from flue gas and in-situ catalytic conversion to methane. [Internet] [Doctoral dissertation]. Columbia University; 2020. [cited 2019 Dec 06]. Available from: https://doi.org/10.7916/d8-q7r5-9314.

Council of Science Editors:

Arellano Treviño MA. A study of catalytic metals and alkaline metal oxides leading to the development of a stable Ru-doped Ni Dual Function Material for CO2 capture from flue gas and in-situ catalytic conversion to methane. [Doctoral Dissertation]. Columbia University; 2020. Available from: https://doi.org/10.7916/d8-q7r5-9314

University of KwaZulu-Natal

18. [No author]. Investigation of perfluorocarbons as potential physical solvents for flue gas cleaning.

Degree: 2017, University of KwaZulu-Natal

URL: http://hdl.handle.net/10413/14091

Abstract available in PDF file. Advisors/Committee Members: Ramjugernath, Deresh D (advisor), Narasigadu, Caleb (advisor), Coquelet, Christophe (advisor).

Subjects/Keywords: Perfluorocarbons.; Phase equilibra.; Flue gases.; Solvents.; Gas cleaning.

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

author], [. (2017). Investigation of perfluorocarbons as potential physical solvents for flue gas cleaning. (Thesis). University of KwaZulu-Natal. Retrieved from http://hdl.handle.net/10413/14091

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

author], [No. “Investigation of perfluorocarbons as potential physical solvents for flue gas cleaning. ” 2017. Thesis, University of KwaZulu-Natal. Accessed December 06, 2019. http://hdl.handle.net/10413/14091.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

author], [No. “Investigation of perfluorocarbons as potential physical solvents for flue gas cleaning. ” 2017. Web. 06 Dec 2019.

Vancouver:

author] [. Investigation of perfluorocarbons as potential physical solvents for flue gas cleaning. [Internet] [Thesis]. University of KwaZulu-Natal; 2017. [cited 2019 Dec 06]. Available from: http://hdl.handle.net/10413/14091.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

author] [. Investigation of perfluorocarbons as potential physical solvents for flue gas cleaning. [Thesis]. University of KwaZulu-Natal; 2017. Available from: http://hdl.handle.net/10413/14091

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

University of Alberta

19. Prybysh, Robert. The production of toxic emissions from reacting diffusion jet flames in a crossflow.

Degree: MS, Department of Mechanical Engineering, 2002, University of Alberta

URL: https://era.library.ualberta.ca/files/8910jx42v

Subjects/Keywords: Plumes (Fluid dynamics); Flue gases.; Organic compounds – Environmental aspects.

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Prybysh, R. (2002). The production of toxic emissions from reacting diffusion jet flames in a crossflow. (Masters Thesis). University of Alberta. Retrieved from https://era.library.ualberta.ca/files/8910jx42v

Chicago Manual of Style (16^th Edition):

Prybysh, Robert. “The production of toxic emissions from reacting diffusion jet flames in a crossflow.” 2002. Masters Thesis, University of Alberta. Accessed December 06, 2019. https://era.library.ualberta.ca/files/8910jx42v.

MLA Handbook (7^th Edition):

Prybysh, Robert. “The production of toxic emissions from reacting diffusion jet flames in a crossflow.” 2002. Web. 06 Dec 2019.

Vancouver:

Prybysh R. The production of toxic emissions from reacting diffusion jet flames in a crossflow. [Internet] [Masters thesis]. University of Alberta; 2002. [cited 2019 Dec 06]. Available from: https://era.library.ualberta.ca/files/8910jx42v.

Council of Science Editors:

Prybysh R. The production of toxic emissions from reacting diffusion jet flames in a crossflow. [Masters Thesis]. University of Alberta; 2002. Available from: https://era.library.ualberta.ca/files/8910jx42v

University of Florida

20. Ergina, John Vincent. Characterization of Selenium Removal from Waste Water.

Degree: 2011, University of Florida

URL: http://ufdc.ufl.edu/AA00060912

► The removal of selenium (VI) from industrial flue gas desulfurization (FGD) effluent to concentrations below EPA and FDEP regulations (0.050 ppm) was tested through a… (more)

Subjects/Keywords: Aluminum; Anodes; Chlorides; Electrocoagulation; Ions; Oxidation; pH; Selenium; Sodium; Water softening; Electrocoagulation; Flue gases – Desulfurization; Selenium; Water – Softening

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Ergina, J. V. (2011). Characterization of Selenium Removal from Waste Water. (Thesis). University of Florida. Retrieved from http://ufdc.ufl.edu/AA00060912

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Ergina, John Vincent. “Characterization of Selenium Removal from Waste Water.” 2011. Thesis, University of Florida. Accessed December 06, 2019. http://ufdc.ufl.edu/AA00060912.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Ergina, John Vincent. “Characterization of Selenium Removal from Waste Water.” 2011. Web. 06 Dec 2019.

Vancouver:

Ergina JV. Characterization of Selenium Removal from Waste Water. [Internet] [Thesis]. University of Florida; 2011. [cited 2019 Dec 06]. Available from: http://ufdc.ufl.edu/AA00060912.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Ergina JV. Characterization of Selenium Removal from Waste Water. [Thesis]. University of Florida; 2011. Available from: http://ufdc.ufl.edu/AA00060912

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

21. Kolarčík, Vojtěch. Dvoutlaký horizintální kotel na odpadní teplo za spalovací turbinu;131kg/s spalin, 558° C .

Degree: 2014, Brno University of Technology

URL: http://hdl.handle.net/11012/32717

► Tato diplomová práce popisuje tepelný výpočet a návrh rozměrů výhřevných ploch kotle na odpadní teplo za spalovací turbínou při zadaných vstupních parametrech spalin a výstupních… (more)

Subjects/Keywords: Dvoutlaký; horizontální; kotel; odpadní teplo; spaliny; pára.; Two pressure levels; horizontal; steam generator; heat recovery; flue gases; steam.

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Kolarčík, V. (2014). Dvoutlaký horizintální kotel na odpadní teplo za spalovací turbinu;131kg/s spalin, 558° C . (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/32717

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Kolarčík, Vojtěch. “Dvoutlaký horizintální kotel na odpadní teplo za spalovací turbinu;131kg/s spalin, 558° C .” 2014. Thesis, Brno University of Technology. Accessed December 06, 2019. http://hdl.handle.net/11012/32717.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Kolarčík, Vojtěch. “Dvoutlaký horizintální kotel na odpadní teplo za spalovací turbinu;131kg/s spalin, 558° C .” 2014. Web. 06 Dec 2019.

Vancouver:

Kolarčík V. Dvoutlaký horizintální kotel na odpadní teplo za spalovací turbinu;131kg/s spalin, 558° C . [Internet] [Thesis]. Brno University of Technology; 2014. [cited 2019 Dec 06]. Available from: http://hdl.handle.net/11012/32717.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Kolarčík V. Dvoutlaký horizintální kotel na odpadní teplo za spalovací turbinu;131kg/s spalin, 558° C . [Thesis]. Brno University of Technology; 2014. Available from: http://hdl.handle.net/11012/32717

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

New Jersey Institute of Technology

22. Cebula, Robert. Determination of polycyclic aromatic hydrocarbons from incineration emission samples.

Degree: MSin Chemical Engineering - (M.S.), Chemical Engineering, Chemistry and Environmental Science, 1988, New Jersey Institute of Technology

URL: https://digitalcommons.njit.edu/theses/1398

► Stack emissions from five sources (one pulverized coal combustion operation, three sewage sludge incineration operations and one gray tin refractory operation) were sampled by… (more)

▼ Stack emissions from five sources (one pulverized coal combustion operation, three sewage sludge incineration operations and one gray tin refractory operation) were sampled by use of U.S. EPA Modified Method 5 isokinetic sampling unit for vapor and particulate effluent. The sampling unit provided XAD-2 resin samples, polytetrafluoroethylene and glass fiber filters and impinger washings of dichloromethane. The resins were soxhlet extracted using dichloromethane (DCM) and the filters were soxhlet extracted using DCM followed by acetone. Fractionation of extracts was accomplished by thin layer chromatography. The resulting fractions were analyzed for polycyclic aromatic hydrocarbons (PAH), nitro-PAH and quinone-PAH by high-performance liquid chromatography (HPLC). Extractable organic matter (EOM) was also determined with a [sic] electrobalance. XAD samples from a gray tin refractory, and three sewage sludge incinerators higher molecular weight PAH. The volatility of the low MW PAH was responsible for the high concentration found in the resins. The lower boiling point of the higher MW PAH and the stronger association of high MW PAH with fly ash are reasons for their presence in the filter samples. No nitro-PAH or quinone-PAH compounds were detected in the emission samples. Of the four XAD resins analyzed for B(a)P by fluorescence scanning three samples showed very similar results. Concentrations from the three sources resulted from two different operations. Comparison of the HPLC results for B(a)P and fluorescence scanning of selected XAD resins have not resulted in good agreement. Phthalates tend to interfere with the HPLC chromatogram in the area where B(a)P elutes. This most likely is the reason for the disagreement. Tetrachloro-p-dibenzodioxin was observed in the resin and washings of the Parsippany Troy Hills source (sewer sludge incinerator). Heptachloro-p-dibenzodioxin was observed in the filter samples of the PSE&G source (coal combustion). The higher chlorinated species seem to form a stronger association with the particulate and a weaker association with the lower chlorinated species. Advisors/Committee Members: Arthur Greenberg, Joseph W. Bozzelli.

Subjects/Keywords: Incineration; Flue Gases – Analysis; Fly Ash Analysis; Chemical Engineering

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Cebula, R. (1988). Determination of polycyclic aromatic hydrocarbons from incineration emission samples. (Thesis). New Jersey Institute of Technology. Retrieved from https://digitalcommons.njit.edu/theses/1398

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Cebula, Robert. “Determination of polycyclic aromatic hydrocarbons from incineration emission samples.” 1988. Thesis, New Jersey Institute of Technology. Accessed December 06, 2019. https://digitalcommons.njit.edu/theses/1398.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Cebula, Robert. “Determination of polycyclic aromatic hydrocarbons from incineration emission samples.” 1988. Web. 06 Dec 2019.

Vancouver:

Cebula R. Determination of polycyclic aromatic hydrocarbons from incineration emission samples. [Internet] [Thesis]. New Jersey Institute of Technology; 1988. [cited 2019 Dec 06]. Available from: https://digitalcommons.njit.edu/theses/1398.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Cebula R. Determination of polycyclic aromatic hydrocarbons from incineration emission samples. [Thesis]. New Jersey Institute of Technology; 1988. Available from: https://digitalcommons.njit.edu/theses/1398

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

University of Arizona

23. Barlas, Sajid Ali,1961-. Redox Transformations and Sulfur Speciation in Flue Gas Desulferization Sludge .

Degree: 1995, University of Arizona

URL: http://hdl.handle.net/10150/191187

► Changes in redox potential (Eh), major sulfur species and the solubility of selenium and boron in reduced flue gas desulfurization (FGD) sludge, when exposed to… (more)

Subjects/Keywords: Hydrology.; Watershed management – Arizona.; Flue gases – Desulfurization.

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Barlas, S. A. (1995). Redox Transformations and Sulfur Speciation in Flue Gas Desulferization Sludge . (Doctoral Dissertation). University of Arizona. Retrieved from http://hdl.handle.net/10150/191187

Chicago Manual of Style (16^th Edition):

Barlas, Sajid Ali,1961-. “Redox Transformations and Sulfur Speciation in Flue Gas Desulferization Sludge .” 1995. Doctoral Dissertation, University of Arizona. Accessed December 06, 2019. http://hdl.handle.net/10150/191187.

MLA Handbook (7^th Edition):

Barlas, Sajid Ali,1961-. “Redox Transformations and Sulfur Speciation in Flue Gas Desulferization Sludge .” 1995. Web. 06 Dec 2019.

Vancouver:

Barlas SA. Redox Transformations and Sulfur Speciation in Flue Gas Desulferization Sludge . [Internet] [Doctoral dissertation]. University of Arizona; 1995. [cited 2019 Dec 06]. Available from: http://hdl.handle.net/10150/191187.

Council of Science Editors:

Barlas SA. Redox Transformations and Sulfur Speciation in Flue Gas Desulferization Sludge . [Doctoral Dissertation]. University of Arizona; 1995. Available from: http://hdl.handle.net/10150/191187

Michigan State University

24. Bell, David M. The impact of air pollution abatement activities of coal-burning electric power generating plants on the fertilizer industry.

Degree: 1971, Michigan State University

URL: http://etd.lib.msu.edu/islandora/object/etd:40173

Thesis () – Michigan State University,

Subjects/Keywords: Flue gases – Desulfurization – By-products; Fertilizer industry – Mathematical models

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Bell, D. M. (1971). The impact of air pollution abatement activities of coal-burning electric power generating plants on the fertilizer industry. (Thesis). Michigan State University. Retrieved from http://etd.lib.msu.edu/islandora/object/etd:40173

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Bell, David M. “The impact of air pollution abatement activities of coal-burning electric power generating plants on the fertilizer industry.” 1971. Thesis, Michigan State University. Accessed December 06, 2019. http://etd.lib.msu.edu/islandora/object/etd:40173.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Bell, David M. “The impact of air pollution abatement activities of coal-burning electric power generating plants on the fertilizer industry.” 1971. Web. 06 Dec 2019.

Vancouver:

Bell DM. The impact of air pollution abatement activities of coal-burning electric power generating plants on the fertilizer industry. [Internet] [Thesis]. Michigan State University; 1971. [cited 2019 Dec 06]. Available from: http://etd.lib.msu.edu/islandora/object/etd:40173.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Bell DM. The impact of air pollution abatement activities of coal-burning electric power generating plants on the fertilizer industry. [Thesis]. Michigan State University; 1971. Available from: http://etd.lib.msu.edu/islandora/object/etd:40173

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Texas A&M University

25. Gupta, Anurag. Oxidation and characterization of FGD byproduct calcium sulfite and oxidized product.

Degree: MS, chemical engineering, 2012, Texas A&M University

URL: http://hdl.handle.net/1969.1/ETD-TAMU-1993-THESIS-G977

Subjects/Keywords: chemical engineering.; Major chemical engineering.; Flue gases - Desulfurization - By-products.; Calcium sulfide - Oxidation.; Flue gases - Desulfurization - By-products - Technological innovations.

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Gupta, A. (2012). Oxidation and characterization of FGD byproduct calcium sulfite and oxidized product. (Masters Thesis). Texas A&M University. Retrieved from http://hdl.handle.net/1969.1/ETD-TAMU-1993-THESIS-G977

Chicago Manual of Style (16^th Edition):

Gupta, Anurag. “Oxidation and characterization of FGD byproduct calcium sulfite and oxidized product.” 2012. Masters Thesis, Texas A&M University. Accessed December 06, 2019. http://hdl.handle.net/1969.1/ETD-TAMU-1993-THESIS-G977.

MLA Handbook (7^th Edition):

Gupta, Anurag. “Oxidation and characterization of FGD byproduct calcium sulfite and oxidized product.” 2012. Web. 06 Dec 2019.

Vancouver:

Gupta A. Oxidation and characterization of FGD byproduct calcium sulfite and oxidized product. [Internet] [Masters thesis]. Texas A&M University; 2012. [cited 2019 Dec 06]. Available from: http://hdl.handle.net/1969.1/ETD-TAMU-1993-THESIS-G977.

Council of Science Editors:

Gupta A. Oxidation and characterization of FGD byproduct calcium sulfite and oxidized product. [Masters Thesis]. Texas A&M University; 2012. Available from: http://hdl.handle.net/1969.1/ETD-TAMU-1993-THESIS-G977

26. Khunsupat, Ratayakorn. Poly(allylamine) and derivatives for co2 capture from flue gas or ultra dilute gas streams such as ambient air.

Degree: MS, Chemistry and Biochemistry, 2011, Georgia Tech

URL: http://hdl.handle.net/1853/44909

► Polymers rich in primary amine groups are proposed to be effective adsorbents for the reversible adsorption of CO2 from moderately dilute gas streams (10% CO2)… (more)

Subjects/Keywords: CO2 capture; Poly(allylamine); Carbon sequestration; Flue gases; Flue gases Purification; Amines

…ubiquitous in flue gases and in ambient air, can out-complete CO2 for adsorption sites. To develop… …capture processes targeting flue gases from large point sources such as coal-fired power plants… …is one of the greenhouse gases that is suggested to contribute to global climate change… …flue gas released from electricity-generating power plants.3-5 Consequently, it is important… …emissions from flue gas. CO2 can be captured from flue gas (post-decarbonization),6…

10 more images…

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Khunsupat, R. (2011). Poly(allylamine) and derivatives for co2 capture from flue gas or ultra dilute gas streams such as ambient air. (Masters Thesis). Georgia Tech. Retrieved from http://hdl.handle.net/1853/44909

Chicago Manual of Style (16^th Edition):

Khunsupat, Ratayakorn. “Poly(allylamine) and derivatives for co2 capture from flue gas or ultra dilute gas streams such as ambient air.” 2011. Masters Thesis, Georgia Tech. Accessed December 06, 2019. http://hdl.handle.net/1853/44909.

MLA Handbook (7^th Edition):

Khunsupat, Ratayakorn. “Poly(allylamine) and derivatives for co2 capture from flue gas or ultra dilute gas streams such as ambient air.” 2011. Web. 06 Dec 2019.

Vancouver:

Khunsupat R. Poly(allylamine) and derivatives for co2 capture from flue gas or ultra dilute gas streams such as ambient air. [Internet] [Masters thesis]. Georgia Tech; 2011. [cited 2019 Dec 06]. Available from: http://hdl.handle.net/1853/44909.

Council of Science Editors:

Khunsupat R. Poly(allylamine) and derivatives for co2 capture from flue gas or ultra dilute gas streams such as ambient air. [Masters Thesis]. Georgia Tech; 2011. Available from: http://hdl.handle.net/1853/44909

Texas A&M University

27. Pettit, Jesse William. Muffle furnace evaluation of FGD sludge-coal-clay mixtures as potential synthetic aggregates.

Degree: MS, civil engineering, 2012, Texas A&M University

URL: http://hdl.handle.net/1969.1/ETD-TAMU-1978-THESIS-P511

Subjects/Keywords: civil engineering.; Major civil engineering.; Aggregates (Building materials); Flue gases - Desulfurization.

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Pettit, J. W. (2012). Muffle furnace evaluation of FGD sludge-coal-clay mixtures as potential synthetic aggregates. (Masters Thesis). Texas A&M University. Retrieved from http://hdl.handle.net/1969.1/ETD-TAMU-1978-THESIS-P511

Chicago Manual of Style (16^th Edition):

Pettit, Jesse William. “Muffle furnace evaluation of FGD sludge-coal-clay mixtures as potential synthetic aggregates.” 2012. Masters Thesis, Texas A&M University. Accessed December 06, 2019. http://hdl.handle.net/1969.1/ETD-TAMU-1978-THESIS-P511.

MLA Handbook (7^th Edition):

Pettit, Jesse William. “Muffle furnace evaluation of FGD sludge-coal-clay mixtures as potential synthetic aggregates.” 2012. Web. 06 Dec 2019.

Vancouver:

Pettit JW. Muffle furnace evaluation of FGD sludge-coal-clay mixtures as potential synthetic aggregates. [Internet] [Masters thesis]. Texas A&M University; 2012. [cited 2019 Dec 06]. Available from: http://hdl.handle.net/1969.1/ETD-TAMU-1978-THESIS-P511.

Council of Science Editors:

Pettit JW. Muffle furnace evaluation of FGD sludge-coal-clay mixtures as potential synthetic aggregates. [Masters Thesis]. Texas A&M University; 2012. Available from: http://hdl.handle.net/1969.1/ETD-TAMU-1978-THESIS-P511

Texas A&M University

28. Othman, Hasliza. Oxidation kinetics of by-product calcium sulfite.

Degree: MS, chemical engineering, 2012, Texas A&M University

URL: http://hdl.handle.net/1969.1/ETD-TAMU-1992-THESIS-O87

Subjects/Keywords: chemical engineering.; Major chemical engineering.; Flue gases - Desulfurization.; Calcium sulfate - Oxidation.

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Othman, H. (2012). Oxidation kinetics of by-product calcium sulfite. (Masters Thesis). Texas A&M University. Retrieved from http://hdl.handle.net/1969.1/ETD-TAMU-1992-THESIS-O87

Chicago Manual of Style (16^th Edition):

Othman, Hasliza. “Oxidation kinetics of by-product calcium sulfite.” 2012. Masters Thesis, Texas A&M University. Accessed December 06, 2019. http://hdl.handle.net/1969.1/ETD-TAMU-1992-THESIS-O87.

MLA Handbook (7^th Edition):

Othman, Hasliza. “Oxidation kinetics of by-product calcium sulfite.” 2012. Web. 06 Dec 2019.

Vancouver:

Othman H. Oxidation kinetics of by-product calcium sulfite. [Internet] [Masters thesis]. Texas A&M University; 2012. [cited 2019 Dec 06]. Available from: http://hdl.handle.net/1969.1/ETD-TAMU-1992-THESIS-O87.

Council of Science Editors:

Othman H. Oxidation kinetics of by-product calcium sulfite. [Masters Thesis]. Texas A&M University; 2012. Available from: http://hdl.handle.net/1969.1/ETD-TAMU-1992-THESIS-O87

Aristotle University Of Thessaloniki (AUTH); Αριστοτέλειο Πανεπιστήμιο Θεσσαλονίκης (ΑΠΘ)

29. Διαμαντοπούλου, Ειρήνη. Απομάκρυνση υδραργύρου από απαέρια καύσης με χρήση ενεργών ανθράκων.

Degree: 2009, Aristotle University Of Thessaloniki (AUTH); Αριστοτέλειο Πανεπιστήμιο Θεσσαλονίκης (ΑΠΘ)

URL: http://hdl.handle.net/10442/hedi/19266

► Combustion processes in coal-fired power plants and municipal waste combustors, are major sources of mercury emissions. Conventional pollution abatement technologies have been proven inefficient for… (more)

▼ Combustion processes in coal-fired power plants and municipal waste combustors, are major sources of mercury emissions. Conventional pollution abatement technologies have been proven inefficient for controlling gas-phase mercury emissions, and especially the elemental form of mercury (Hg°), due to its insolubility in water, chemical inertia and high volatility. One promising option is the mercury retention by adsorption with solid materials such as activated carbon, calcium-based sorbents, fly ash and zeolites. Among them, activated carbon, which pos-sesses extended surface area and high surface reactivity, seem to be suitable for Hg° adsorption, used in a fixed bed operation or in an injection process. The purpose of the current PhD thesis is to evaluate the performance of activated carbons with different physico-chemical characteristics, for gas-phase mercury adsorption under various conditions. This research was realized in order to elucidate some unclear estimations in the lit-erature. So, the correlation between activated carbon pore structure and its organic material properties with mercury adsorption, was investigated. The effect of inorganic material on the activation process and the physicochemical properties of the produced activated carbons, as well as the probability of elemental mercury retention in inorganic matter, was also examined. Additionally to activated carbon pore structure impact on mercury removal ability, the oxygen functional groups that constitute active sites for mercury chemisorption and favors the adsorp-tion procedure, have been determined. Their action was also observed at high temperatures, where physical adsorption participation is limited. Similarly, the reaction between elemental mercury and sulphur atoms added on carbon surface was responsible for the enhanced mercury adsorption capacity of the sulphur impregnated activated carbons. Against the results obtained in several studies, in this research the modification of activated carbon surface after sulphur ad-dition didn’t change its pore structure characteristics. The above results have been derived under inert gas conditions (Ν2 and Hg°), without the interference or the competitive adsorption of other flue gases. The chemisorption of elemental mercury was also investigated in the presence of some flue gases and it was found that mercury adsorption not only was affected by activated carbon characteristics, but also by the oxidant properties of the flue gases. Two commercial activated carbons of different origin have been used (F400 from bitumi-nous coal and RWE from German lignite) in order to examine the chemical affinity between activated carbon surface and elemental mercury. Moreover, activated carbons produced from Ptolemais Greek lignite, which has been mainly used in energy production field and disposes a high content of mineral matter, were tested. Activated carbons prepared from raw Ptolemais lignite (PSK-R) and demineralized lignite (PSK-D) with physical activation method at 800 and 900°C, have been tested for their…

Subjects/Keywords: Υδράργυρος; Προσρόφηση; Ενεργός άνθρακας; Σταθερές κλίνες; Κινητική; Πορώδης δομή; Ενεργό κέντρο; Απαέρια; Mercury; Adsorption; Activated carbon; Fixed bed; Kinetics; Pore structure; Active site; Flue gases

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Διαμαντοπούλου, . �. (2009). Απομάκρυνση υδραργύρου από απαέρια καύσης με χρήση ενεργών ανθράκων. (Thesis). Aristotle University Of Thessaloniki (AUTH); Αριστοτέλειο Πανεπιστήμιο Θεσσαλονίκης (ΑΠΘ). Retrieved from http://hdl.handle.net/10442/hedi/19266

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Διαμαντοπούλου, Ειρήνη. “Απομάκρυνση υδραργύρου από απαέρια καύσης με χρήση ενεργών ανθράκων.” 2009. Thesis, Aristotle University Of Thessaloniki (AUTH); Αριστοτέλειο Πανεπιστήμιο Θεσσαλονίκης (ΑΠΘ). Accessed December 06, 2019. http://hdl.handle.net/10442/hedi/19266.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Διαμαντοπούλου, Ειρήνη. “Απομάκρυνση υδραργύρου από απαέρια καύσης με χρήση ενεργών ανθράκων.” 2009. Web. 06 Dec 2019.

Vancouver:

Διαμαντοπούλου �. Απομάκρυνση υδραργύρου από απαέρια καύσης με χρήση ενεργών ανθράκων. [Internet] [Thesis]. Aristotle University Of Thessaloniki (AUTH); Αριστοτέλειο Πανεπιστήμιο Θεσσαλονίκης (ΑΠΘ); 2009. [cited 2019 Dec 06]. Available from: http://hdl.handle.net/10442/hedi/19266.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Διαμαντοπούλου �. Απομάκρυνση υδραργύρου από απαέρια καύσης με χρήση ενεργών ανθράκων. [Thesis]. Aristotle University Of Thessaloniki (AUTH); Αριστοτέλειο Πανεπιστήμιο Θεσσαλονίκης (ΑΠΘ); 2009. Available from: http://hdl.handle.net/10442/hedi/19266

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

30. Berry, Mark Simpson. Full Scale Calcium Bromide Injection With Subsequent Mercury Oxidation And Removal Within Wet Flue Gas Desulphurization System: Experience At A 700 Mw Coal-Fired Power Facility.

Degree: PhD, 2012, University of Alabama – Birmingham

URL: http://contentdm.mhsl.uab.edu/u?/etd,1438

►

The Environmental Protection Agency promulgated the Mercury and Air Toxics Standards rule, which requires that existing power plants reduce mercury emissions to meet an emission… (more)

▼

The Environmental Protection Agency promulgated the Mercury and Air Toxics Standards rule, which requires that existing power plants reduce mercury emissions to meet an emission rate of 1.2 lb/TBtu on a 30-day rolling average and that new plants meet a 0.0002 lb/GWHr emission rate. This translates to mercury removals greater than90% for existing units and greater than 99% for new units. Current state-of-the-art technology for the control of mercury emissions uses activated carbon injected upstream of a fabric filter, a costly proposition. For example, a fabric filter, if not already available,would require a 200M capital investment for a 700 MW size unit. A lower-cost option involves the injection of activated carbon into an existing cold-side electrostatic precipitator. Both options would incur the cost of activated carbon, upwards of 3M per year. The combination of selective catalytic reduction (SCR) reactors and wet flue gas desulphurization (wet FGD) systems have demonstrated the ability to substantially reduce mercury emissions, especially at units that burn coals containing sufficient halogens. Halogens are necessary for transforming elemental mercury to oxidized mercury, which is water-soluble. Plants burning halogen-deficient coals such as Power River Basin (PRB) coals currently have no alternative but to install activated carbon-based approaches to control mercury emissions.This research consisted of investigating calcium bromide addition onto PRB coal as a method of increasing flue gas halogen concentration. The treated coal was combusted in a 700 MW boiler and the subsequent treated flue gas was introduced into awet FGD. Short-term parametric and an 83-day longer-term tests were completed to determine the ability of calcium bromine to oxidize mercury and to study the removal of the mercury in a wet FGD. The research goal was to show that calcium bromine additionto PRB coal was a viable approach for meeting the Mercury and Air Toxics Standards rule for existing boilers.The use of calcium bromide injection as an alternative to activated carbon approaches could save millions of dollars. The technology application described herein has the potential to reduce compliance cost by 200M for a 700 MW facility burning PRB coal.

PhD

1 online resource (xx, 234 p.) :ill. (some col.)

Engineering

calcium bromide injection mercury emissions mercury oxidation mercury reemission mercury removal Powder River Basin coal

UNRESTRICTED

Advisors/Committee Members: Peter M. Walsh, Bharat K. Soni, Chang,Ramsay Lalor, Melinda M. Monroe, Larry S..

Subjects/Keywords: Mercury – Environmental aspects.<; br>; Coal-fired power plants – Environmental aspects.<; br>; Injection metallurgy.<; br>; Bromides.<; br>; Flue gases – Purification.

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Berry, M. S. (2012). Full Scale Calcium Bromide Injection With Subsequent Mercury Oxidation And Removal Within Wet Flue Gas Desulphurization System: Experience At A 700 Mw Coal-Fired Power Facility. (Doctoral Dissertation). University of Alabama – Birmingham. Retrieved from http://contentdm.mhsl.uab.edu/u?/etd,1438

Chicago Manual of Style (16^th Edition):

Berry, Mark Simpson. “Full Scale Calcium Bromide Injection With Subsequent Mercury Oxidation And Removal Within Wet Flue Gas Desulphurization System: Experience At A 700 Mw Coal-Fired Power Facility.” 2012. Doctoral Dissertation, University of Alabama – Birmingham. Accessed December 06, 2019. http://contentdm.mhsl.uab.edu/u?/etd,1438.

MLA Handbook (7^th Edition):

Berry, Mark Simpson. “Full Scale Calcium Bromide Injection With Subsequent Mercury Oxidation And Removal Within Wet Flue Gas Desulphurization System: Experience At A 700 Mw Coal-Fired Power Facility.” 2012. Web. 06 Dec 2019.

Vancouver:

Berry MS. Full Scale Calcium Bromide Injection With Subsequent Mercury Oxidation And Removal Within Wet Flue Gas Desulphurization System: Experience At A 700 Mw Coal-Fired Power Facility. [Internet] [Doctoral dissertation]. University of Alabama – Birmingham; 2012. [cited 2019 Dec 06]. Available from: http://contentdm.mhsl.uab.edu/u?/etd,1438.

Council of Science Editors:

Berry MS. Full Scale Calcium Bromide Injection With Subsequent Mercury Oxidation And Removal Within Wet Flue Gas Desulphurization System: Experience At A 700 Mw Coal-Fired Power Facility. [Doctoral Dissertation]. University of Alabama – Birmingham; 2012. Available from: http://contentdm.mhsl.uab.edu/u?/etd,1438

Open Access Theses and Dissertations