subject:(adhesive)

Delft University of Technology

1. Kadam, S. (author). Failure criteria for evaluating Strength of Adhesive joints.

Degree: 2014, Delft University of Technology

URL: http://resolver.tudelft.nl/uuid:e6472268-9a39-4b90-aa96-22ad1ddef4da

►

An attempt is made to evaluate all possible stress based failure criteria that have been otherwise traditionally used for ductile metals and also some other… (more)

Subjects/Keywords: adhesive; failure criteria; adhesive testing

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Kadam, S. (. (2014). Failure criteria for evaluating Strength of Adhesive joints. (Masters Thesis). Delft University of Technology. Retrieved from http://resolver.tudelft.nl/uuid:e6472268-9a39-4b90-aa96-22ad1ddef4da

Chicago Manual of Style (16^th Edition):

Kadam, S (author). “Failure criteria for evaluating Strength of Adhesive joints.” 2014. Masters Thesis, Delft University of Technology. Accessed January 22, 2021. http://resolver.tudelft.nl/uuid:e6472268-9a39-4b90-aa96-22ad1ddef4da.

MLA Handbook (7^th Edition):

Kadam, S (author). “Failure criteria for evaluating Strength of Adhesive joints.” 2014. Web. 22 Jan 2021.

Vancouver:

Kadam S(. Failure criteria for evaluating Strength of Adhesive joints. [Internet] [Masters thesis]. Delft University of Technology; 2014. [cited 2021 Jan 22]. Available from: http://resolver.tudelft.nl/uuid:e6472268-9a39-4b90-aa96-22ad1ddef4da.

Council of Science Editors:

Kadam S(. Failure criteria for evaluating Strength of Adhesive joints. [Masters Thesis]. Delft University of Technology; 2014. Available from: http://resolver.tudelft.nl/uuid:e6472268-9a39-4b90-aa96-22ad1ddef4da

Louisiana State University

2. Holt, TreyVon. Cure-on demand wood adhesives using frontal polymerization of acrylates.

Degree: MS, Chemistry, 2011, Louisiana State University

URL: etd-08202011-150424 ; https://digitalcommons.lsu.edu/gradschool_theses/4224

► Frontal polymerization (FP) is when the monomer is polymerized by a zone of reaction propagating through the monomer. The reaction zone is fueled by the… (more)

Subjects/Keywords: adhesive; frontal polymerization; wood adhesive

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Holt, T. (2011). Cure-on demand wood adhesives using frontal polymerization of acrylates. (Masters Thesis). Louisiana State University. Retrieved from etd-08202011-150424 ; https://digitalcommons.lsu.edu/gradschool_theses/4224

Chicago Manual of Style (16^th Edition):

Holt, TreyVon. “Cure-on demand wood adhesives using frontal polymerization of acrylates.” 2011. Masters Thesis, Louisiana State University. Accessed January 22, 2021. etd-08202011-150424 ; https://digitalcommons.lsu.edu/gradschool_theses/4224.

MLA Handbook (7^th Edition):

Holt, TreyVon. “Cure-on demand wood adhesives using frontal polymerization of acrylates.” 2011. Web. 22 Jan 2021.

Vancouver:

Holt T. Cure-on demand wood adhesives using frontal polymerization of acrylates. [Internet] [Masters thesis]. Louisiana State University; 2011. [cited 2021 Jan 22]. Available from: etd-08202011-150424 ; https://digitalcommons.lsu.edu/gradschool_theses/4224.

Council of Science Editors:

Holt T. Cure-on demand wood adhesives using frontal polymerization of acrylates. [Masters Thesis]. Louisiana State University; 2011. Available from: etd-08202011-150424 ; https://digitalcommons.lsu.edu/gradschool_theses/4224

Oregon State University

3. McKinley, Paige Elizabeth. Multi-scale Investigation of Adhesive Bond Durability.

Degree: MS, Wood Science, 2016, Oregon State University

URL: http://hdl.handle.net/1957/59764

► Moisture durability is essential for wood composites, especially those used in building construction, where products are prone to weathering. The primary focus of this research… (more)

▼ Moisture durability is essential for wood composites, especially those used in building construction, where products are prone to weathering. The primary focus of this research was to determine if adhesive penetration into the cell wall has a positive influence on adhesive bond durability. To fully understand the measureable effects of adhesive penetration on moisture resistance, a multi-scale investigation was conducted. The study used bonded Douglas-fir lap-shear test specimens (6mm x 14 mm x 64 mm), varying in bonded surface cell type (earlywood vs. latewood) and adhesive type. The adhesives of interest were a low and high molecular weight phenol-formaldehyde (PF), a low molecular weight PF with added filler and extender, and a methylene diphenylene diisocyanate (MDI). Half of each group of test specimens was subjected to accelerated weathering and the rest remained dry. All samples were mechanically tested in lap-shear. During the test, Digital Image Correlation (DIC) was used to track displacements across the surface of the sample. The failure load, effective shear modulus, energy to failure, percent wood failure, failure mode, and DIC shear strain maps were used to evaluate the mechanical performance of the dry and weathered specimens. Smaller samples (2 mm x 2 mm x 10 mm) were cut from the previously tested lap-shear samples and scanned at the Advanced Photon Source (APS), Argonne National Laboratory, using micro-X-ray Computed Tomography (XCT). All adhesive types were previously tagged with iodine to increase contrast during the XCT scans. This technique gave high resolution (1.3 µm³/voxel), 3D images for which adhesive penetration was analyzed. Further, additional samples were cut from the previously scanned micro-XCT samples for nano-XCT scanning at the APS. The nano-XCT data gave a resolution of 60 nm³/voxel, allowing for detection of adhesive penetration into the cell substance and sub-micron cell features. Complementary analyses using Energy Dispersive Spectroscopy (EDS) and X-ray Fluorescence Microscopy (XFM) were used to confirm the presence of iodine in areas containing adhesive, and to further observe adhesive penetration into the cell substance. Statistical analysis showed two of the adhesive formulations had significant differences in mechanical properties after weathering. Weathering had a negative effect on the mechanical properties. DIC shear strain maps revealed that the same two adhesive formulations had more strain around the bonded interphase at the same applied load. Adhesive penetration into the cell substance was observed, but cannot be quantitatively compared between the four adhesives, due to inadequate image quality from nano-XCT and the low number of specimen replications. Overall, there was more effective adhesive penetration in the lower molecular weight adhesive and less shear strain calculated from the DIC macroweathered analysis. This indicated that adhesive penetration could have a positive influence on moisture durability, although the variability is too high to make a… Advisors/Committee Members: Kamke, Frederick A. (advisor), Muszyński, Lech (committee member).

Subjects/Keywords: adhesive; Wood – Bonding

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

McKinley, P. E. (2016). Multi-scale Investigation of Adhesive Bond Durability. (Masters Thesis). Oregon State University. Retrieved from http://hdl.handle.net/1957/59764

Chicago Manual of Style (16^th Edition):

McKinley, Paige Elizabeth. “Multi-scale Investigation of Adhesive Bond Durability.” 2016. Masters Thesis, Oregon State University. Accessed January 22, 2021. http://hdl.handle.net/1957/59764.

MLA Handbook (7^th Edition):

McKinley, Paige Elizabeth. “Multi-scale Investigation of Adhesive Bond Durability.” 2016. Web. 22 Jan 2021.

Vancouver:

McKinley PE. Multi-scale Investigation of Adhesive Bond Durability. [Internet] [Masters thesis]. Oregon State University; 2016. [cited 2021 Jan 22]. Available from: http://hdl.handle.net/1957/59764.

Council of Science Editors:

McKinley PE. Multi-scale Investigation of Adhesive Bond Durability. [Masters Thesis]. Oregon State University; 2016. Available from: http://hdl.handle.net/1957/59764

University of Waterloo

4. Yang, Fut. Self-polymerized Dopamine Thin Film as Bioadhesive.

Degree: 2012, University of Waterloo

URL: http://hdl.handle.net/10012/6531

► Dopamine is an interesting biomolecule that functions as a neurotransmitter in the brain. It has been found able to stick to almost all surfaces due… (more)

▼ Dopamine is an interesting biomolecule that functions as a neurotransmitter in the brain. It has been found able to stick to almost all surfaces due to its unique catecholamine structure. Under alkaline conditions, the catechol functional group oxidizes to quinone allowing dopamine to self-polymerize and form thin films on support surfaces. The facts that dopamine can be coated to virtually any materials and the amine and catechol functional groups support a variety of reactions with organic species make polydopamine an attractive multifunctional bioadhesive/coating. To date, most of research on polydopamine has been focusing on its applications as thin films and little attention has been paid to the adhesion aspect of the material. In the study, we evaluated the properties of self-polymerized dopamine thin films as a bioadhesive. The thesis consists of three consecutive studies: (i) characterization of the adhesion properties of polydopamine thin films; (ii) investigation of the mechanical properties of polydopamine thin films; and (iii) exploration of the potential of polydopamine thin films as a wet adhesive. Fundamental insights on the wettability, adhesion behaviours, and mechanical properties of polydopamine thin films for both wet and dry conditions were derived through sets of well-designed contact angle, contact adhesion, and contact deformation experiments. It was found that dopamine is able to coat plastic, ceramic and metal surfaces, and join or bond rigid substrates but might not be suitable for joining soft or flexible parts as polydopamine is fairly rigid and the bonding might be too slow and too rigid for practical applications if polydopamine is directly used as an adhesive. Based on the understanding, a new strategy for fabricating underwater adhesive was proposed and tested. In the strategy, polydopamine with ferric ion as the oxidant was utilized as a cross-linker to alginate solution, effectively turning the solution into a wet adhesive, which demonstrated better practical performances than other studies; the adhesive was able to produce a permanent tensile adhesive strength of 80 kPa joining aluminum and glass with macroscopic roughness at the interface within 2 hours of curing time. Inspired by the results from the contact deformation experiments, we were able to extend the JKR theory with the well-known plate theory to accommodate the deformation of nanometer thin films, obtaining their elasticity. We termed this extended theory the “thin film contact mechanics” and validated the theory against gold thin films and found it predicted the mechanical behaviours of the thin films fairly well.

Subjects/Keywords: wet adhesive; polydopamine

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Yang, F. (2012). Self-polymerized Dopamine Thin Film as Bioadhesive. (Thesis). University of Waterloo. Retrieved from http://hdl.handle.net/10012/6531

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Yang, Fut. “Self-polymerized Dopamine Thin Film as Bioadhesive.” 2012. Thesis, University of Waterloo. Accessed January 22, 2021. http://hdl.handle.net/10012/6531.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Yang, Fut. “Self-polymerized Dopamine Thin Film as Bioadhesive.” 2012. Web. 22 Jan 2021.

Vancouver:

Yang F. Self-polymerized Dopamine Thin Film as Bioadhesive. [Internet] [Thesis]. University of Waterloo; 2012. [cited 2021 Jan 22]. Available from: http://hdl.handle.net/10012/6531.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Yang F. Self-polymerized Dopamine Thin Film as Bioadhesive. [Thesis]. University of Waterloo; 2012. Available from: http://hdl.handle.net/10012/6531

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

NSYSU

5. Chu, Yu-hung. Fabrication of one-dimensional optical fiber array using a new active-alignment technique.

Degree: Master, Mechanical and Electro-Mechanical Engineering, 2008, NSYSU

URL: http://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0727108-222104

► This paper presents a novel active-alignment technique to fabricate one-dimensional optical fiber array. The advantages of this technique are providing simple structure on silicon- based… (more)

Subjects/Keywords: fiber array; adhesive; alignment

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Chu, Y. (2008). Fabrication of one-dimensional optical fiber array using a new active-alignment technique. (Thesis). NSYSU. Retrieved from http://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0727108-222104

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Chu, Yu-hung. “Fabrication of one-dimensional optical fiber array using a new active-alignment technique.” 2008. Thesis, NSYSU. Accessed January 22, 2021. http://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0727108-222104.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Chu, Yu-hung. “Fabrication of one-dimensional optical fiber array using a new active-alignment technique.” 2008. Web. 22 Jan 2021.

Vancouver:

Chu Y. Fabrication of one-dimensional optical fiber array using a new active-alignment technique. [Internet] [Thesis]. NSYSU; 2008. [cited 2021 Jan 22]. Available from: http://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0727108-222104.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Chu Y. Fabrication of one-dimensional optical fiber array using a new active-alignment technique. [Thesis]. NSYSU; 2008. Available from: http://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0727108-222104

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Oregon State University

6. Prasittisopin, Lapyote. A new method of making particleboard with a formaldehyde-free soy-based adhesive.

Degree: MS, Materials Science, 2009, Oregon State University

URL: http://hdl.handle.net/1957/13623

► Particleboard is widely used for making bookshelf, furniture, cabinets and many other interior products. At present, particleboard is mainly produced with wood particles and urea-formaldehyde… (more)

▼ Particleboard is widely used for making bookshelf, furniture, cabinets and many other interior products. At present, particleboard is mainly produced with wood particles and urea-formaldehyde (UF) resins. The emission of carcinogenic formaldehyde in the production and use of particleboard has generated an urgent need for development of a formaldehyde-free wood adhesive for making particleboard. Formaldehyde is derived from natural gas whose reserve is finite. It is also desirable to develop a wood adhesive from renewable material for making particleboard. Soy flour is inexpensive, abundant, renewable and readily available. A formaldehyde-free wood adhesive consisting of soy flour (SF) and a curing agent (CA) CA1000 has been used for commercial production of interior plywood since 2004. However, this CA-soy adhesive has high viscosity and is difficult to be sprayed onto wood particles with a conventional spraying nozzle. This study developed a new method of using this CA-soy adhesive for making particleboard. This new method involved the coating of wood particles with a dilute soy slurry in water, the drying of the soy-coated wood particles, the spraying of the CA onto the dried soy-coated wood particles, the formation of a particleboard mat with the CA-soy-coated wood particles and the hotpressing of the mat into particleboard. The high viscosity of the adhesive was no longer an issue with this new method. For investigation of the effectiveness of this new method, effects of particleboard density, adhesive usages for both core and face particles, the solids content of the soy slurry, hot-press time, hot-press temperature, the storage time of the soy-coated wood particles, and the soy/CA ratio on the internal bond strength (IB), the modulus of rupture (MOR), and the modulus of elasticity (MOE) of the resulting particleboard were investigated in detail. Results demonstrated that this new method had wide operational windows for making particleboard and allowed the strengths of particleboard bonded with this CA-soy adhesive to exceed the industry requirements of M-2 particleboard. The optimal conditions of using this method for making particleboard in terms of enhancing the IB, MOR, and MOE were: 760 kg/m³ of the particleboard density, 11 wt% resin usage for the core particles, 12 wt% resin usage for the face particles, 20 wt% solids content of the soy slurry, 180 °C of the hot-press temperature, 224 s of the hot-press time, 1:7 CA/SF weight ratio, and 36 h of the storage time for the wet soy-coated wood particles. Advisors/Committee Members: Li, Kaichang (advisor), Rochefort, Karchesy Joseph Willie E. Skip (committee member).

Subjects/Keywords: wood adhesive; Soybean glue

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Prasittisopin, L. (2009). A new method of making particleboard with a formaldehyde-free soy-based adhesive. (Masters Thesis). Oregon State University. Retrieved from http://hdl.handle.net/1957/13623

Chicago Manual of Style (16^th Edition):

Prasittisopin, Lapyote. “A new method of making particleboard with a formaldehyde-free soy-based adhesive.” 2009. Masters Thesis, Oregon State University. Accessed January 22, 2021. http://hdl.handle.net/1957/13623.

MLA Handbook (7^th Edition):

Prasittisopin, Lapyote. “A new method of making particleboard with a formaldehyde-free soy-based adhesive.” 2009. Web. 22 Jan 2021.

Vancouver:

Prasittisopin L. A new method of making particleboard with a formaldehyde-free soy-based adhesive. [Internet] [Masters thesis]. Oregon State University; 2009. [cited 2021 Jan 22]. Available from: http://hdl.handle.net/1957/13623.

Council of Science Editors:

Prasittisopin L. A new method of making particleboard with a formaldehyde-free soy-based adhesive. [Masters Thesis]. Oregon State University; 2009. Available from: http://hdl.handle.net/1957/13623

Oregon State University

7. Gu, Kai. Evaluation of new formaldehyde-free, soy flour-based wood adhesives for making particleboard.

Degree: MS, Wood Science, 2010, Oregon State University

URL: http://hdl.handle.net/1957/16165

► Formaldehyde-based adhesives such as urea-formaldehyde (UF), phenol-formaldehyde (PF) are widely applied in wood-based composite industry. However, these adhesives are all petrochemical-based and could not sustain… (more)

▼ Formaldehyde-based adhesives such as urea-formaldehyde (UF), phenol-formaldehyde (PF) are widely applied in wood-based composite industry. However, these adhesives are all petrochemical-based and could not sustain in a long term due to a limited reserve of oil and natural gas. Moreover, these adhesives emit carcinogenic formaldehyde in the production or use of wood composite panels, thus reducing indoor air quality and posing a health risk to human beings. Soy flour (SF) is an abundant, readily available, renewable, and inexpensive material and is mainly used for food application at present. Its potential for industrial applications has not been fully realized. In this study, we evaluated two SF-based formaldehyde-free wood adhesives for making M-2 Grade particleboard panels. The first adhesive was composed of SF, polyethylenimine (PEI), maleic anhydride (MA) and sodium hydroxide (NaOH). The weight ratio of SF/PEI/MA/NaOH was 7/1.0/0.32/0.1. The hot-press temperature, hot-press time, panel density and adhesive usages were optimized in terms of enhancing the modulus of rupture (MOR), modulus of elasticity (MOE) and internal bond (IB) of the particleboard panels. It was found that the MOR, MOE and IB exceeded the minimum industrial requirements of M-2 particleboards under the following variables and conditions: hot-press temperature, 170 °C; hot-press time, 270 s; the adhesive usage of surface particles, 10 wt%; the adhesive usage of the core particles, 8 wt%; and the targeted particleboard density, 0.80 g/cm³. The second adhesive consisted of SF, a new curing agent (CA) and NaOH. Effects of the weight ratio of adhesive components on strengths of the particleboard panels were investigated. It was found that this adhesive resulted in the highest strengths at the SF/NaOH/CA weight ratio of 9/0.3/1. Effects of hot-press temperature and hot-press time on strengths of the panels were also investigated. The MOR, MOE and IB met the minimum industrial requirements of M-2 particleboard panels under the following variables and conditions: hot-press temperature, 190 °C; hot-press time, 270 s; the adhesive usage of surface particles, 12 wt%; the adhesive usage of the core particles, 10 wt%; and the targeted particleboard density, 0.80 g/cm³. Advisors/Committee Members: Li, Kaichang (advisor), Nairn, John A (committee member).

Subjects/Keywords: wood adhesive; Soybean glue

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Gu, K. (2010). Evaluation of new formaldehyde-free, soy flour-based wood adhesives for making particleboard. (Masters Thesis). Oregon State University. Retrieved from http://hdl.handle.net/1957/16165

Chicago Manual of Style (16^th Edition):

Gu, Kai. “Evaluation of new formaldehyde-free, soy flour-based wood adhesives for making particleboard.” 2010. Masters Thesis, Oregon State University. Accessed January 22, 2021. http://hdl.handle.net/1957/16165.

MLA Handbook (7^th Edition):

Gu, Kai. “Evaluation of new formaldehyde-free, soy flour-based wood adhesives for making particleboard.” 2010. Web. 22 Jan 2021.

Vancouver:

Gu K. Evaluation of new formaldehyde-free, soy flour-based wood adhesives for making particleboard. [Internet] [Masters thesis]. Oregon State University; 2010. [cited 2021 Jan 22]. Available from: http://hdl.handle.net/1957/16165.

Council of Science Editors:

Gu K. Evaluation of new formaldehyde-free, soy flour-based wood adhesives for making particleboard. [Masters Thesis]. Oregon State University; 2010. Available from: http://hdl.handle.net/1957/16165

University of Debrecen

8. Varga, Krisztina. Fizioterápiás módszerek alkalmazása az adhesive capsulitisben .

Degree: DE – Népegészségügyi Kar, University of Debrecen

URL: http://hdl.handle.net/2437/214106

► Szakdolgozatom során az adhesive capsulitis komplex mozgásterápiájának hatását vizsgáltam. A mozgásterápiában négy beteg vett részt. Minden beteg 10 kezelést vett fel. Egy kezelés időtartama átlagosan… (more)

Subjects/Keywords: adhesive capsulitis

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Varga, K. (n.d.). Fizioterápiás módszerek alkalmazása az adhesive capsulitisben . (Thesis). University of Debrecen. Retrieved from http://hdl.handle.net/2437/214106

Note: this citation may be lacking information needed for this citation format:
No year of publication.
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Varga, Krisztina. “Fizioterápiás módszerek alkalmazása az adhesive capsulitisben .” Thesis, University of Debrecen. Accessed January 22, 2021. http://hdl.handle.net/2437/214106.

Note: this citation may be lacking information needed for this citation format:
No year of publication.
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Varga, Krisztina. “Fizioterápiás módszerek alkalmazása az adhesive capsulitisben .” Web. 22 Jan 2021.

Note: this citation may be lacking information needed for this citation format:
No year of publication.

Vancouver:

Varga K. Fizioterápiás módszerek alkalmazása az adhesive capsulitisben . [Internet] [Thesis]. University of Debrecen; [cited 2021 Jan 22]. Available from: http://hdl.handle.net/2437/214106.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
No year of publication.

Council of Science Editors:

Varga K. Fizioterápiás módszerek alkalmazása az adhesive capsulitisben . [Thesis]. University of Debrecen; Available from: http://hdl.handle.net/2437/214106

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
No year of publication.

KTH

9. Magnusson, Angelica. Syntes av nya MUF-limmer och analys av dessas härdning i limfog.

Degree: Chemical Science and Engineering (CHE), 2015, KTH

URL: http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-172977

► In this project, different MUF resins were synthesized with varying melamine content, F/NH2 molar ratio, number of addition steps and with varying addition order… (more)

▼ In this project, different MUF resins were synthesized with varying melamine content, F/NH2 molar ratio, number of addition steps and with varying addition order of the reactants during synthesis. Further, it was investigated how these synthesis parameters influenced resin properties including storage stability and free formaldehyde content. Additionally, NMR spectroscopy was used in order to study the resulting chemical structure of the resins and their molecular size and molecular size distribution were examined by SEC and MALDI-TOF-MS. The curing kinetics of the resins were studied by Raman spectroscopy. From the resins, cured glue joints were prepared and the mechanical properties and water resistance of these were tested through tensile shear testing after different pretreatments of the glue joints. It was confirmed that synthesis under both alkaline and acidic conditions resulted in a higher amount of ether bridges in the resin in comparison to synthesis under acidic conditions. Furthermore, a high melamine content and fewer urea additions resulted in resins with a higher amount of methylol groups and less substituted functional groups. Comparatively, when the F/NH2 molar ratio was increased or when formalin was added in two steps, a resin with higher amount of substituted groups and structures of higher degree of condensation was obtained. From the synthesis procedure it was concluded that a long condensation time at alkaline conditions was the most efficient way to achieve a low free formaldehyde content, while a high F/NH2 molar ratio resulted in the highest amount of free formaldehyde. Furthermore, a high amount of flexible ether bridges, low amount of methylol groups, low melamine content, high F/NH2 molar ratio and a high degree of branched chains seem to be important structural parameters for achieving resins with a long shelf life. Additionally, from the SEC-analysis it was found that the resins had an average molecular weight (Mn) between 1000-1600 g/mol and a broad molecular weight distribution, which were further verified by MALDI-TOF-MS. The resins with a high melamine content had shorter chains, and the molecular weight distribution was most significantly increased when the number of addition steps were changed. Through analysis of the curing process it was found that a higher hardener-to-resin mixing ratio resulted in a faster curing process and a higher final degree of cross-linking. Additionally, it appeared as the reaction of methylol groups was less pH-dependent than the reactions of ether bridges and methylene bridges, which both were favored at lower pH. From the kinetic profiles it was observed that the resin with a higher amount of ether bridges and lower amount of methylol groups had a more prolonged curing process. Furthermore, the mechanical testing of the resulting cured glue joints showed no…

Subjects/Keywords: Adhesive; MUF; NMR; Curing; Raman

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Magnusson, A. (2015). Syntes av nya MUF-limmer och analys av dessas härdning i limfog. (Thesis). KTH. Retrieved from http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-172977

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Magnusson, Angelica. “Syntes av nya MUF-limmer och analys av dessas härdning i limfog.” 2015. Thesis, KTH. Accessed January 22, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-172977.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Magnusson, Angelica. “Syntes av nya MUF-limmer och analys av dessas härdning i limfog.” 2015. Web. 22 Jan 2021.

Vancouver:

Magnusson A. Syntes av nya MUF-limmer och analys av dessas härdning i limfog. [Internet] [Thesis]. KTH; 2015. [cited 2021 Jan 22]. Available from: http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-172977.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Magnusson A. Syntes av nya MUF-limmer och analys av dessas härdning i limfog. [Thesis]. KTH; 2015. Available from: http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-172977

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Delft University of Technology

10. van den Berg, L.J. (author). Increasing the Strength of an Adhesive Joint: Geometry Optimization of Complex Joint Configurations for Implementation in Composite Micro Truss Structures.

Degree: 2016, Delft University of Technology

URL: http://resolver.tudelft.nl/uuid:af0f0825-b3bd-41a3-94ca-336de550e337

►

A FEM-based tool was developed for optimization of the geometry of an adhesive joint for implementation in a composite micro truss structure. A genetic algorithm… (more)

Subjects/Keywords: adhesive; joint; bonding; geometry optimization

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

van den Berg, L. J. (. (2016). Increasing the Strength of an Adhesive Joint: Geometry Optimization of Complex Joint Configurations for Implementation in Composite Micro Truss Structures. (Masters Thesis). Delft University of Technology. Retrieved from http://resolver.tudelft.nl/uuid:af0f0825-b3bd-41a3-94ca-336de550e337

Chicago Manual of Style (16^th Edition):

van den Berg, L J (author). “Increasing the Strength of an Adhesive Joint: Geometry Optimization of Complex Joint Configurations for Implementation in Composite Micro Truss Structures.” 2016. Masters Thesis, Delft University of Technology. Accessed January 22, 2021. http://resolver.tudelft.nl/uuid:af0f0825-b3bd-41a3-94ca-336de550e337.

MLA Handbook (7^th Edition):

van den Berg, L J (author). “Increasing the Strength of an Adhesive Joint: Geometry Optimization of Complex Joint Configurations for Implementation in Composite Micro Truss Structures.” 2016. Web. 22 Jan 2021.

Vancouver:

van den Berg LJ(. Increasing the Strength of an Adhesive Joint: Geometry Optimization of Complex Joint Configurations for Implementation in Composite Micro Truss Structures. [Internet] [Masters thesis]. Delft University of Technology; 2016. [cited 2021 Jan 22]. Available from: http://resolver.tudelft.nl/uuid:af0f0825-b3bd-41a3-94ca-336de550e337.

Council of Science Editors:

van den Berg LJ(. Increasing the Strength of an Adhesive Joint: Geometry Optimization of Complex Joint Configurations for Implementation in Composite Micro Truss Structures. [Masters Thesis]. Delft University of Technology; 2016. Available from: http://resolver.tudelft.nl/uuid:af0f0825-b3bd-41a3-94ca-336de550e337

University of Minnesota

11. Sudit, Geoffrey Nathan. Debonding and adhesive remnant cleanup: an in vitro comparison of bond quality, adhesive remnant cleanup, and orthodontic acceptance of a flash-free product.

Degree: MS, Dentistry, 2014, University of Minnesota

URL: http://hdl.handle.net/11299/165611

► Background: New orthodontic products are continuously introduced to clinicians seeking more practical and efficient solutions for their practice. One such product is a new flash-free… (more)

▼ Background: New orthodontic products are continuously introduced to clinicians seeking more practical and efficient solutions for their practice. One such product is a new flash-free adhesive for orthodontic bracket bonding, which has been introduced to the market recently. This new adhesive needs to be clinically appraised with regard to its efficacy and efficiency, and compared with conventional orthodontic adhesives that are currently in use.Aims: To compare the quality of the bond at the enamel-bracket interface using micro-computed tomography (microCT), the amount of adhesive remaining on the tooth surface after bracket debonding, the time required for adhesive remnant cleanup, and clinical practitioners' preference between the new flash-free and a conventional adhesive. Materials and Methods: A total of 160 bovine incisors were bonded with ceramic orthodontic brackets using the flash-free adhesive (APC Flash-Free Adhesive Coated Appliance System, 3M) on one side and a conventional adhesive (APCII Adhesive Coated Appliance System, 3M) on the other side. Twenty-four teeth were randomly selected and scanned using microCT to analyze microleakage into the adhesive layer. Twenty orthodontists debonded twenty mounted dental arches. The adhesive remnant on the bovine incisors was quantified. The orthodontists then removed the remaining adhesive. The time required for complete removal of adhesive was recorded. Finally, the orthodontists completed a specifically designed survey to evaluate their preference for one of the two adhesives. Results: For both adhesives tested, the microleakage was very minimal with no significant differences between the two adhesives. The amount of adhesive remaining on the tooth after bracket debonding was significantly larger for the flash-free adhesive (P<0.0001). The adhesive cleanup was about 8% faster when using the flash-free adhesive, but the difference was not statistically significant when compared with the conventional adhesive. Fourteen out of 20 orthodontists preferred the flash-free product over the conventional product.Conclusions: With regard to the practicality and efficiency, the new flash-free adhesive performs just as well as the conventional adhesive.

Subjects/Keywords: Adhesive; Bracket; Flash-free; Orthodontics

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Sudit, G. N. (2014). Debonding and adhesive remnant cleanup: an in vitro comparison of bond quality, adhesive remnant cleanup, and orthodontic acceptance of a flash-free product. (Masters Thesis). University of Minnesota. Retrieved from http://hdl.handle.net/11299/165611

Chicago Manual of Style (16^th Edition):

Sudit, Geoffrey Nathan. “Debonding and adhesive remnant cleanup: an in vitro comparison of bond quality, adhesive remnant cleanup, and orthodontic acceptance of a flash-free product.” 2014. Masters Thesis, University of Minnesota. Accessed January 22, 2021. http://hdl.handle.net/11299/165611.

MLA Handbook (7^th Edition):

Sudit, Geoffrey Nathan. “Debonding and adhesive remnant cleanup: an in vitro comparison of bond quality, adhesive remnant cleanup, and orthodontic acceptance of a flash-free product.” 2014. Web. 22 Jan 2021.

Vancouver:

Sudit GN. Debonding and adhesive remnant cleanup: an in vitro comparison of bond quality, adhesive remnant cleanup, and orthodontic acceptance of a flash-free product. [Internet] [Masters thesis]. University of Minnesota; 2014. [cited 2021 Jan 22]. Available from: http://hdl.handle.net/11299/165611.

Council of Science Editors:

Sudit GN. Debonding and adhesive remnant cleanup: an in vitro comparison of bond quality, adhesive remnant cleanup, and orthodontic acceptance of a flash-free product. [Masters Thesis]. University of Minnesota; 2014. Available from: http://hdl.handle.net/11299/165611

University of Hong Kong

12. So, Hing-wa. Strength of adhesive-bonded joints immersed in different solutions.

Degree: 1992, University of Hong Kong

URL: http://hdl.handle.net/10722/33221

Subjects/Keywords: Adhesive joints.

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

So, H. (1992). Strength of adhesive-bonded joints immersed in different solutions. (Thesis). University of Hong Kong. Retrieved from http://hdl.handle.net/10722/33221

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

So, Hing-wa. “Strength of adhesive-bonded joints immersed in different solutions.” 1992. Thesis, University of Hong Kong. Accessed January 22, 2021. http://hdl.handle.net/10722/33221.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

So, Hing-wa. “Strength of adhesive-bonded joints immersed in different solutions.” 1992. Web. 22 Jan 2021.

Vancouver:

So H. Strength of adhesive-bonded joints immersed in different solutions. [Internet] [Thesis]. University of Hong Kong; 1992. [cited 2021 Jan 22]. Available from: http://hdl.handle.net/10722/33221.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

So H. Strength of adhesive-bonded joints immersed in different solutions. [Thesis]. University of Hong Kong; 1992. Available from: http://hdl.handle.net/10722/33221

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

New Jersey Institute of Technology

13. Gamel, Kaelyn Mykel. Using a bio-inspired model to understand the evolution of the remora adhesive disk.

Degree: MSin Biology - (M.S.), Federated Department of Biological Sciences, 2017, New Jersey Institute of Technology

URL: https://digitalcommons.njit.edu/theses/19

► Manmade adhesives often fail on wet, compliant surfaces, which can result in poor performance when attaching sensors in medical, defense, and research situations. However,… (more)

Subjects/Keywords: Echenidae; Remora; Adhesive disk; Biology

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Gamel, K. M. (2017). Using a bio-inspired model to understand the evolution of the remora adhesive disk. (Thesis). New Jersey Institute of Technology. Retrieved from https://digitalcommons.njit.edu/theses/19

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Gamel, Kaelyn Mykel. “Using a bio-inspired model to understand the evolution of the remora adhesive disk.” 2017. Thesis, New Jersey Institute of Technology. Accessed January 22, 2021. https://digitalcommons.njit.edu/theses/19.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Gamel, Kaelyn Mykel. “Using a bio-inspired model to understand the evolution of the remora adhesive disk.” 2017. Web. 22 Jan 2021.

Vancouver:

Gamel KM. Using a bio-inspired model to understand the evolution of the remora adhesive disk. [Internet] [Thesis]. New Jersey Institute of Technology; 2017. [cited 2021 Jan 22]. Available from: https://digitalcommons.njit.edu/theses/19.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Gamel KM. Using a bio-inspired model to understand the evolution of the remora adhesive disk. [Thesis]. New Jersey Institute of Technology; 2017. Available from: https://digitalcommons.njit.edu/theses/19

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

University of Utah

14. Wang, Ching-shuen. The multipart copolyelectrolyte adhesive system of the sandcastle worm: the biological insights for developing a synthetic underwater adhesive.

Degree: PhD, Bioengineering, 2015, University of Utah

URL: http://content.lib.utah.edu/cdm/singleitem/collection/etd3/id/3822/rec/2608

► Marine Sandcastle worms, Phragmatopoma californica, are tube-building sabellariid polychaetes that inhabit the western coast of North American. Sabellariidae have major impacts on the geology and… (more)

Subjects/Keywords: coacervate; medical adhesive; phragmatopoma californica; sandcastle worm adhesive

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Wang, C. (2015). The multipart copolyelectrolyte adhesive system of the sandcastle worm: the biological insights for developing a synthetic underwater adhesive. (Doctoral Dissertation). University of Utah. Retrieved from http://content.lib.utah.edu/cdm/singleitem/collection/etd3/id/3822/rec/2608

Chicago Manual of Style (16^th Edition):

Wang, Ching-shuen. “The multipart copolyelectrolyte adhesive system of the sandcastle worm: the biological insights for developing a synthetic underwater adhesive.” 2015. Doctoral Dissertation, University of Utah. Accessed January 22, 2021. http://content.lib.utah.edu/cdm/singleitem/collection/etd3/id/3822/rec/2608.

MLA Handbook (7^th Edition):

Wang, Ching-shuen. “The multipart copolyelectrolyte adhesive system of the sandcastle worm: the biological insights for developing a synthetic underwater adhesive.” 2015. Web. 22 Jan 2021.

Vancouver:

Wang C. The multipart copolyelectrolyte adhesive system of the sandcastle worm: the biological insights for developing a synthetic underwater adhesive. [Internet] [Doctoral dissertation]. University of Utah; 2015. [cited 2021 Jan 22]. Available from: http://content.lib.utah.edu/cdm/singleitem/collection/etd3/id/3822/rec/2608.

Council of Science Editors:

Wang C. The multipart copolyelectrolyte adhesive system of the sandcastle worm: the biological insights for developing a synthetic underwater adhesive. [Doctoral Dissertation]. University of Utah; 2015. Available from: http://content.lib.utah.edu/cdm/singleitem/collection/etd3/id/3822/rec/2608

University of Utah

15. Kaur, Sarbjit. Adhesive complex coacervate inspired by the sandcastle worm as a sealant for fetoscopic defects.

Degree: PhD, Materials Science & Engineering, 2015, University of Utah

URL: http://content.lib.utah.edu/cdm/singleitem/collection/etd3/id/3541/rec/150

► Inspired by the Sandcastle Worm, biomimetic of the water-borne adhesive was developed by complex coacervation of the synthetic copolyelectrolytes, mimicking the chemistries of the worm… (more)

Subjects/Keywords: Adhesive; Biomimetic; Complex coacervate; Fetoscopic defects; Sandcastle worm; Soft tissue adhesive

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Kaur, S. (2015). Adhesive complex coacervate inspired by the sandcastle worm as a sealant for fetoscopic defects. (Doctoral Dissertation). University of Utah. Retrieved from http://content.lib.utah.edu/cdm/singleitem/collection/etd3/id/3541/rec/150

Chicago Manual of Style (16^th Edition):

Kaur, Sarbjit. “Adhesive complex coacervate inspired by the sandcastle worm as a sealant for fetoscopic defects.” 2015. Doctoral Dissertation, University of Utah. Accessed January 22, 2021. http://content.lib.utah.edu/cdm/singleitem/collection/etd3/id/3541/rec/150.

MLA Handbook (7^th Edition):

Kaur, Sarbjit. “Adhesive complex coacervate inspired by the sandcastle worm as a sealant for fetoscopic defects.” 2015. Web. 22 Jan 2021.

Vancouver:

Kaur S. Adhesive complex coacervate inspired by the sandcastle worm as a sealant for fetoscopic defects. [Internet] [Doctoral dissertation]. University of Utah; 2015. [cited 2021 Jan 22]. Available from: http://content.lib.utah.edu/cdm/singleitem/collection/etd3/id/3541/rec/150.

Council of Science Editors:

Kaur S. Adhesive complex coacervate inspired by the sandcastle worm as a sealant for fetoscopic defects. [Doctoral Dissertation]. University of Utah; 2015. Available from: http://content.lib.utah.edu/cdm/singleitem/collection/etd3/id/3541/rec/150

University of Alberta

16. Kislitsin, Vadim Y. Development of specified risk material-based plywood adhesive with enhanced water resistivity.

Degree: MS, Department of Chemical and Materials Engineering, 2016, University of Alberta

URL: https://era.library.ualberta.ca/files/c2r36tx756

► Canadian plywood industry with its 2 billion square feet annual capacity [83] requires a large amount of adhesive materials to satisfy its needs. This forces… (more)

▼ Canadian plywood industry with its 2 billion square feet annual capacity [83] requires a large amount of adhesive materials to satisfy its needs. This forces plywood manufacturers to consider the utilization of agricultural bio-waste to create environmentally friendly adhesive materials with the properties similar to those commercially available in the market. Released in 2007, the Enhanced Feed Ban made available thousands of tonnes of Specified Risk Material (SRM) – tissues of cattle where abnormally folded proteins – prions that cause Bovine Spongiform Encephalopathy (BSE) disease, are the most likely to be concentrated. The recent studies show that if hydrolyzed according to the Canadian Food Inspection Agency protocol, prions get irreversibly broken down and SRM contains a sufficient amount of useful proteinaceous material. The purpose of this research was to develop an adhesive (glue) material with outstanding water resistive properties for potential application in plywood industry and to evaluate its performance. Hydrolyzed SRM was chemically modified by esterification reaction with alcohol. The degree of esterification and other characteristics were evaluated with size exclusion high performance liquid chromatography (SEC-HPLC), sodium dodecyl sulphate poly-(acrylamide) gel electrophoresis (SDS-PAGE), Fourier transform infrared spectroscopy (FTIR), contact angle measurement, and qualitative calculation of free carboxylic groups. The modified SRM appeared to have better water resistant properties that the original SRM. The modified SRM was further crosslinked with glutaraldehyde and further evaluated with Fourier transform infrared spectroscopy (FTIR). The adhesive properties of crosslinked esterified SRM were evaluated in accordance with the American Standard of Testing Materials (ASTM) standard technique – lap shear stress evaluation of an adhesive bonded joint using the Instron MTS 810 equipment. Overall, this study has showed that the chemical modification of SRM by esterification improves water resistance of hydrolyzed SRM. The adhesive material developed by crosslinking of chemically modified SRM with glutaraldehyde performed well and passed the standard requirements by ASTM showing that the pressing temperature is the crucial factor in the application of SRM-based adhesive of the evaluated formulation.

Subjects/Keywords: Adhesive; Wood adhesive; Plywood; Specified risk material; SRM

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Kislitsin, V. Y. (2016). Development of specified risk material-based plywood adhesive with enhanced water resistivity. (Masters Thesis). University of Alberta. Retrieved from https://era.library.ualberta.ca/files/c2r36tx756

Chicago Manual of Style (16^th Edition):

Kislitsin, Vadim Y. “Development of specified risk material-based plywood adhesive with enhanced water resistivity.” 2016. Masters Thesis, University of Alberta. Accessed January 22, 2021. https://era.library.ualberta.ca/files/c2r36tx756.

MLA Handbook (7^th Edition):

Kislitsin, Vadim Y. “Development of specified risk material-based plywood adhesive with enhanced water resistivity.” 2016. Web. 22 Jan 2021.

Vancouver:

Kislitsin VY. Development of specified risk material-based plywood adhesive with enhanced water resistivity. [Internet] [Masters thesis]. University of Alberta; 2016. [cited 2021 Jan 22]. Available from: https://era.library.ualberta.ca/files/c2r36tx756.

Council of Science Editors:

Kislitsin VY. Development of specified risk material-based plywood adhesive with enhanced water resistivity. [Masters Thesis]. University of Alberta; 2016. Available from: https://era.library.ualberta.ca/files/c2r36tx756

Penn State University

17. Doll, Kristopher Robert. Characterization of Polymerization-induced Workpiece Distortion in Photo-activated Adhesive Workholding.

Degree: 2014, Penn State University

URL: https://submit-etda.libraries.psu.edu/catalog/22782

► Photo-Activated Adhesive Workholding (PAAW) is a new technology that offers fixturing solutions for hard-to-hold manufactured components through the use of temporary UV-cured adhesive joints. One… (more)

▼ Photo-Activated Adhesive Workholding (PAAW) is a new technology that offers fixturing solutions for hard-to-hold manufactured components through the use of temporary UV-cured adhesive joints. One area in need of further development is the handling of compliant workpieces. Adhesive joints experience a decrease in volume as they cure, causing either an accumulation of residual stresses inside the adhesive joint or a distortion of the bonding substrates. Compliant workpieces will elastically distort as these PAAW joints polymerize, making it difficult to achieve tight tolerances as these workpieces are processed. This work characterizes the distortion caused by PAAW adhesive joints in response to factors such as workpiece compliance, joint thickness, and adhesive joint diameter. Empirical models are fit to the experimental data to predict workpiece distortion. The bonding surfaces, known as Grippers, used in PAAW technology transmit a non-uniform distribution of curing light intensity to the adhesive joint by design. The interaction of adjacent adhesive regions with different light intensities and consequently different polymerization rates is explained in terms of a support column model, where the region that develops a significant elastic modulus first will oppose further motion of the substrate. This idea is demonstrated through experiments with varying adhesive joint diameter. To offer insight regarding workpiece distortion reduction for typical industrial use of PAAW fixturing, a scenario involving multiple adhesive joints curing simultaneously and sequentially is explored. A methodology is created to predict the resulting distortion of a workpiece for any PAAW fixturing setup and curing sequence. A case study with experimental results validates the approach. In an attempt to find a low distortion adhesive, a number of different types of filler content and adhesive base resin are evaluated. The adhesive strength, cohesive strength, tensile properties, polymerization shrinkage, and the resulting workpiece distortion are experimentally determined. A model is presented to explain how several of these factors contribute to distortion. Advisors/Committee Members: Edward Demeter, Thesis Advisor/Co-Advisor.

Subjects/Keywords: PAAW; Photo-Activated Adhesive Workholding; adhesive shrinkage; workpiece distortion

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Doll, K. R. (2014). Characterization of Polymerization-induced Workpiece Distortion in Photo-activated Adhesive Workholding. (Thesis). Penn State University. Retrieved from https://submit-etda.libraries.psu.edu/catalog/22782

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Doll, Kristopher Robert. “Characterization of Polymerization-induced Workpiece Distortion in Photo-activated Adhesive Workholding.” 2014. Thesis, Penn State University. Accessed January 22, 2021. https://submit-etda.libraries.psu.edu/catalog/22782.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Doll, Kristopher Robert. “Characterization of Polymerization-induced Workpiece Distortion in Photo-activated Adhesive Workholding.” 2014. Web. 22 Jan 2021.

Vancouver:

Doll KR. Characterization of Polymerization-induced Workpiece Distortion in Photo-activated Adhesive Workholding. [Internet] [Thesis]. Penn State University; 2014. [cited 2021 Jan 22]. Available from: https://submit-etda.libraries.psu.edu/catalog/22782.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Doll KR. Characterization of Polymerization-induced Workpiece Distortion in Photo-activated Adhesive Workholding. [Thesis]. Penn State University; 2014. Available from: https://submit-etda.libraries.psu.edu/catalog/22782

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

18. Nasiri, Anahita. The Use of Lignin in Pressure Sensitive Adhesives and Starch-Based Adhesives .

Degree: 2019, University of Ottawa

URL: http://hdl.handle.net/10393/39853

► After cellulose, lignin is the second most abundant natural polymer in the world. It has multiple functional groups, providing great potential for polymer production. In… (more)

▼ After cellulose, lignin is the second most abundant natural polymer in the world. It has multiple functional groups, providing great potential for polymer production. In this project, we explored the use of this renewable and valuable resource in two different adhesive applications to displace petroleum-based additives, thereby providing a more sustainable and “green” product. In this regard, two types of lignin, water-soluble (Amalin LPH) and non-water-soluble lignin (Amalin HPH) provided by the British Columbia Research Institute (BCRI) were used. In the first case, lignin was added to a pressure-sensitive adhesive (PSA) formulation via in-situ seeded semi-batch emulsion polymerization. It was seen that lignin does not readily take part in the polymerization reaction; rather, its presence results in reaction inhibition. Therefore, Amalin LPH lignin was modified via acrylation to overcome this issue. In another modification approach, maleic anhydride was used to produce maleated Amalin HPH lignin. Both the acrylated and maleated lignins were used in butyl acrylate/methyl methacrylate emulsion copolymerizations to produce PSA films. A series of controlled experiments with different lignin loadings was conducted. Adhesive properties of the PSA films were measured and compared with the corresponding acrylic base case formulation. The incorporation of lignin in the PSA formulation was a “green” solution to conventional PSA production and led to a simultaneous increase in tack and shear strength. Further characterization of the latex films via transmission electron microscopy (TEM) showed that lignin was successfully incorporated into the polymer particles. It also showed that the use of maleated lignin at a higher concentration led to a core-shell morphology. In the second application, unmodified Amalin LPH lignin was used to create a starch-based adhesive through the Stein-Hall process, a two-step process involving a “carrier” portion and a “slurry” portion. Several formulations with lignin loadings up to 35 wt% distributed in varying ratios in the carrier and slurry portions were prepared. It was shown that the addition of lignin to the starch-based adhesive formulation increases the water-resistance of the adhesive. Therefore, lignin addition is a solution for a common issue in starch-based adhesives, their lack of water-resistance due to the high affinity of starch toward water. Lignin incorporation solely in the slurry portion significantly increased the strength of the glued joints in a paper board adhesive test. The use of lignin as a renewable replacement of petroleum-based components in two different adhesive formulations was demonstrated successfully. This research strongly suggests that lignin can be used as a high value-added property modifier in adhesive applications.

Subjects/Keywords: Lignin; Pressure-sensitive adhesive; Starch-based adhesive; Lignin modification

14 more images…

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Nasiri, A. (2019). The Use of Lignin in Pressure Sensitive Adhesives and Starch-Based Adhesives . (Thesis). University of Ottawa. Retrieved from http://hdl.handle.net/10393/39853

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Nasiri, Anahita. “The Use of Lignin in Pressure Sensitive Adhesives and Starch-Based Adhesives .” 2019. Thesis, University of Ottawa. Accessed January 22, 2021. http://hdl.handle.net/10393/39853.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Nasiri, Anahita. “The Use of Lignin in Pressure Sensitive Adhesives and Starch-Based Adhesives .” 2019. Web. 22 Jan 2021.

Vancouver:

Nasiri A. The Use of Lignin in Pressure Sensitive Adhesives and Starch-Based Adhesives . [Internet] [Thesis]. University of Ottawa; 2019. [cited 2021 Jan 22]. Available from: http://hdl.handle.net/10393/39853.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Nasiri A. The Use of Lignin in Pressure Sensitive Adhesives and Starch-Based Adhesives . [Thesis]. University of Ottawa; 2019. Available from: http://hdl.handle.net/10393/39853

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Univerzitet u Beogradu

19. Popović, Mlađan M., 1969-. Očvršćavanje urea-formaldehidnog adheziva za ploče iverice u prisustvu nekih domaćih drvnih vrsta.

Degree: Šumarski fakultet, 2013, Univerzitet u Beogradu

URL: https://fedorabg.bg.ac.rs/fedora/get/o:5823/bdef:Content/get

►

Šumarstvo / Forestry

U oviru ove doktorske disertacije istražen je uticaj drvnih vrsta bukve, jele i topole, na kinetiku očvršćavanja komercijalnog urea-formaldehidnog (UF) adheziva, namenjenog… (more)

▼

Šumarstvo / Forestry

U oviru ove doktorske disertacije istražen je uticaj drvnih vrsta bukve, jele i topole, na kinetiku očvršćavanja komercijalnog urea-formaldehidnog (UF) adheziva, namenjenog za proizvodnju ploča iverica. U tom cilju primenjene su metode diferencijalne skenirajuće kalorimetrije (DSC), dielektrične analize (DEA) i dinamičko mehaničke analize (DMA). DSC ispitivanja obavljena su u dinamičkom režimu, pri brzinama zagrevanja (β) od 5; 10; 15 i 20 °C/min. Ispitivane uzorke činili su čist UF adheziv, smeše UF adheziva sa drvnim brašnom i smeše UF adheziva sa ekstraktivima ispitivanih vrsta drveta. Dodatak katalizatora (NH4Cl) iznosio je 0,2%, mereno na suvu supstancu adheziva, za sve ispitivane uzorke. Rezultati merenja predstavljeni su vrednostima temperature maksimuma reakcije (Tp), entalpijom reakcije (ΔH), kao i energijom aktivacije (Ea). Takođe, na rezultatima DSC merenja primenjeni su izokonverzioni modeli Ozawa-Flynn-Wall (OFW) i Kissinger-Akahira-Sunose (KAS). DEA ispitivanja obavljena su u izotermalnom režimu i u uslovima vrelog presovanja furnirskih uzoraka ispitivanih drvnih vrsta, slepljenih UF adhezivom sa dodatkom NH4Cl od 0,2%, mereno na suvu supstancu adheziva. Temperature presovanja iznosile su 120; 140 i 160 °C. Očitavanje dielektričnih parametara obavljeno je pomoću IDEX senzora postavljenog na liniji lepljenja i povezanog sa instrumentom za merenje impendanse. Vrednosti stepena reakcije (α), dobijene su na osnovu promene električne provodljivosti. DMA ispitivanja obavljena su pri konstantnom oscilatornom režimu naprezanja na smicanje i pri temperaturi od 80 °C. Ispitivane uzorke predstavljali su čist UF adheziv i smeše UF adheziva sa ekstraktivima ispitivanih vrsta drveta. Posebne serije ispitivanja obavljene su sa dodatkom NH4Cl od 0,2%, mereno na suvu supstancu adheziva, kao i bez dodatka katalizatora. Vreme želiranja ispitivanih uzoraka određeno je presekom kriva modula sačuvane energije (G') i modula izgubljene energije (G"), odnosno za vrednost faktora gubitka tanδ=1. Ispitivanjem UF adheziva u smeši sa drvnim ekstraktivima, pomoću DSC i DMA metoda, utvrđeno je da pH vrednost i kiseli puferni kapacitet ispitivanih drvnih vrsta značajno utiču na kinetiku reakcije očvršćavanja. Niže vrednosti pomenutih hemijskih karakteristika ekstraktiva uticale su na smanjenje temperature maksimuma reakcije i energije aktivacije, kao i na kraće vreme želiranja odgovarajuće ispitivane smeše. Rezultati ispitivanja UF adheziva u smeši sa drvnim brašnom, pomoću DSC metode, kao i rezultati ispitivanja dielektričnih parametara očvršćavanja UF adheziva pri vrelom presovanju furnirskih uzoraka, pokazali su značajan uticaj anatomske građe ispitivanih drvnih vrsta na tok očvršćavanja UF adheziva.

Advisors/Committee Members: Điporović-Momčilović, Milanka, 1962-.

Subjects/Keywords: UF adhesive; adhesive curing; wood species; acidity of wood

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Popović, Mlađan M., 1. (2013). Očvršćavanje urea-formaldehidnog adheziva za ploče iverice u prisustvu nekih domaćih drvnih vrsta. (Thesis). Univerzitet u Beogradu. Retrieved from https://fedorabg.bg.ac.rs/fedora/get/o:5823/bdef:Content/get

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Popović, Mlađan M., 1969-. “Očvršćavanje urea-formaldehidnog adheziva za ploče iverice u prisustvu nekih domaćih drvnih vrsta.” 2013. Thesis, Univerzitet u Beogradu. Accessed January 22, 2021. https://fedorabg.bg.ac.rs/fedora/get/o:5823/bdef:Content/get.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Popović, Mlađan M., 1969-. “Očvršćavanje urea-formaldehidnog adheziva za ploče iverice u prisustvu nekih domaćih drvnih vrsta.” 2013. Web. 22 Jan 2021.

Vancouver:

Popović, Mlađan M. 1. Očvršćavanje urea-formaldehidnog adheziva za ploče iverice u prisustvu nekih domaćih drvnih vrsta. [Internet] [Thesis]. Univerzitet u Beogradu; 2013. [cited 2021 Jan 22]. Available from: https://fedorabg.bg.ac.rs/fedora/get/o:5823/bdef:Content/get.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Popović, Mlađan M. 1. Očvršćavanje urea-formaldehidnog adheziva za ploče iverice u prisustvu nekih domaćih drvnih vrsta. [Thesis]. Univerzitet u Beogradu; 2013. Available from: https://fedorabg.bg.ac.rs/fedora/get/o:5823/bdef:Content/get

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Delft University of Technology

20. Sun, J. (author). Investigation of the Application of adhesively bonded lifting lugs in ship building.

Degree: 2017, Delft University of Technology

URL: http://resolver.tudelft.nl/uuid:70c3126b-776f-4ec4-9e14-a739b985c929

►

Defects are produced when lifting lugs being welded on ship sections during the building process. The large amount of heat produced in the welding work… (more)

Subjects/Keywords: ship building; lifting lugs; structural adhesive; adhesive bonding

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Sun, J. (. (2017). Investigation of the Application of adhesively bonded lifting lugs in ship building. (Masters Thesis). Delft University of Technology. Retrieved from http://resolver.tudelft.nl/uuid:70c3126b-776f-4ec4-9e14-a739b985c929

Chicago Manual of Style (16^th Edition):

Sun, J (author). “Investigation of the Application of adhesively bonded lifting lugs in ship building.” 2017. Masters Thesis, Delft University of Technology. Accessed January 22, 2021. http://resolver.tudelft.nl/uuid:70c3126b-776f-4ec4-9e14-a739b985c929.

MLA Handbook (7^th Edition):

Sun, J (author). “Investigation of the Application of adhesively bonded lifting lugs in ship building.” 2017. Web. 22 Jan 2021.

Vancouver:

Sun J(. Investigation of the Application of adhesively bonded lifting lugs in ship building. [Internet] [Masters thesis]. Delft University of Technology; 2017. [cited 2021 Jan 22]. Available from: http://resolver.tudelft.nl/uuid:70c3126b-776f-4ec4-9e14-a739b985c929.

Council of Science Editors:

Sun J(. Investigation of the Application of adhesively bonded lifting lugs in ship building. [Masters Thesis]. Delft University of Technology; 2017. Available from: http://resolver.tudelft.nl/uuid:70c3126b-776f-4ec4-9e14-a739b985c929

University of Waterloo

21. Li, Zhenhao. Fabrication of Capacitive Micromachined Ultrasonic Transducers based on Adhesive Wafer Bonding.

Degree: 2017, University of Waterloo

URL: http://hdl.handle.net/10012/11167

► Capacitive micromachined ultrasonic transducers (CMUTs) can be used for medical imaging, non-destructive testing or medical treatment applications. It can also be used as gravimetric sensors… (more)

▼ Capacitive micromachined ultrasonic transducers (CMUTs) can be used for medical imaging, non-destructive testing or medical treatment applications. It can also be used as gravimetric sensors for gas sensing or immersion bio-sensing. Although various CMUT fabrication methods have been reported, there are still many challenges to address. Conventional fabrication methods can be categorized as either surface micromachining or the wafer bonding method. These methods have design trade-offs and limitations associated with process complexity, structural parameter optimization and wafer materials selection. For example, surface micromachining approaches can suffer from complicated fabrication processes. In addition, structural parameters cannot be fully optimized due to feasibility concerns during fabrication. In contrast, the development of wafer bonding techniques enabled CMUTs to be fabricated in a straightforward way and structural parameters can be easily optimized when compared with a surface micromachining approach. However, the yield of the traditional wafer bonded CMUTs is very sensitive to contaminations and the surface quality at the bonding interface. Although the difficulties of the wafer bonding process are not always reported, they definitely exist for every researcher who wants to fabricate their own CMUTs. As a result, this dissertation work aims to develop a CMUT fabrication process with fewer fabrication constraints, low-cost and low process temperature for CMOS integration. The developed CMUT fabrication processes reported in the thesis applied photosensitive polymer adhesive for wafer bonding in order to make a process with good tolerance to contaminations and defects on the wafer surface, present a wide range of material selection at the bonding interface and require low process temperature (less than 250°C). These features can benefit CMUT fabrication with increased yield better design flexibility and lower cost. Having maximum process temperature of 250°C, the developed processes can also be CMOS compatible. Furthermore, a novel CMUT structure, which can only be achieved by the reported technique, was developed showing more than doubled ultrasound receive sensitivity when compared with conventional CMUT structures. The fabrication processes were developed systematically and the details of process development will be presented in this thesis.

Subjects/Keywords: Capacitive Micromachined Ultrasonic Transducers; Benzocyclobutene; Photosensitive Adhesive; Adhesive Wafer Bonding

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Li, Z. (2017). Fabrication of Capacitive Micromachined Ultrasonic Transducers based on Adhesive Wafer Bonding. (Thesis). University of Waterloo. Retrieved from http://hdl.handle.net/10012/11167

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Li, Zhenhao. “Fabrication of Capacitive Micromachined Ultrasonic Transducers based on Adhesive Wafer Bonding.” 2017. Thesis, University of Waterloo. Accessed January 22, 2021. http://hdl.handle.net/10012/11167.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Li, Zhenhao. “Fabrication of Capacitive Micromachined Ultrasonic Transducers based on Adhesive Wafer Bonding.” 2017. Web. 22 Jan 2021.

Vancouver:

Li Z. Fabrication of Capacitive Micromachined Ultrasonic Transducers based on Adhesive Wafer Bonding. [Internet] [Thesis]. University of Waterloo; 2017. [cited 2021 Jan 22]. Available from: http://hdl.handle.net/10012/11167.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Li Z. Fabrication of Capacitive Micromachined Ultrasonic Transducers based on Adhesive Wafer Bonding. [Thesis]. University of Waterloo; 2017. Available from: http://hdl.handle.net/10012/11167

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

22. 半場, 悠介. Preparation and Properties of Fluorescent Orthodontic Adhesives Containing Y₂O₃:Eu³⁺ Particles : Y₂O₃:Eu³⁺微粒子含有矯正歯科用蛍光ボンディング剤の製造と特性.

Degree: 博士(歯学), 2014, Hokkaido University / 北海道大学

URL: http://hdl.handle.net/2115/55835 ; http://dx.doi.org/10.14943/doctoral.k11250

►

Orthodontic adhesives are typically colorless and transparent for aesthetic purposes. The utilization of fluorescence is one of the most effective solutions to make the adhesives… (more)

Subjects/Keywords: fluorescence; lanthanide; europium; yttria oxide; orthodontic adhesive

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

半場, �. (2014). Preparation and Properties of Fluorescent Orthodontic Adhesives Containing Y₂O₃:Eu³⁺ Particles : Y₂O₃:Eu³⁺微粒子含有矯正歯科用蛍光ボンディング剤の製造と特性. (Thesis). Hokkaido University / 北海道大学. Retrieved from http://hdl.handle.net/2115/55835 ; http://dx.doi.org/10.14943/doctoral.k11250

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

半場, 悠介. “Preparation and Properties of Fluorescent Orthodontic Adhesives Containing Y₂O₃:Eu³⁺ Particles : Y₂O₃:Eu³⁺微粒子含有矯正歯科用蛍光ボンディング剤の製造と特性.” 2014. Thesis, Hokkaido University / 北海道大学. Accessed January 22, 2021. http://hdl.handle.net/2115/55835 ; http://dx.doi.org/10.14943/doctoral.k11250.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

半場, 悠介. “Preparation and Properties of Fluorescent Orthodontic Adhesives Containing Y₂O₃:Eu³⁺ Particles : Y₂O₃:Eu³⁺微粒子含有矯正歯科用蛍光ボンディング剤の製造と特性.” 2014. Web. 22 Jan 2021.

Vancouver:

半場 �. Preparation and Properties of Fluorescent Orthodontic Adhesives Containing Y₂O₃:Eu³⁺ Particles : Y₂O₃:Eu³⁺微粒子含有矯正歯科用蛍光ボンディング剤の製造と特性. [Internet] [Thesis]. Hokkaido University / 北海道大学; 2014. [cited 2021 Jan 22]. Available from: http://hdl.handle.net/2115/55835 ; http://dx.doi.org/10.14943/doctoral.k11250.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

半場 �. Preparation and Properties of Fluorescent Orthodontic Adhesives Containing Y₂O₃:Eu³⁺ Particles : Y₂O₃:Eu³⁺微粒子含有矯正歯科用蛍光ボンディング剤の製造と特性. [Thesis]. Hokkaido University / 北海道大学; 2014. Available from: http://hdl.handle.net/2115/55835 ; http://dx.doi.org/10.14943/doctoral.k11250

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

23. Bhandary, Sarita. Design Development and evaluation of Gastro Intestinal Muco Adhesive Patch System GIMAPS for Oral Drug delivery.

Degree: Pharmacy, 2013, INFLIBNET

URL: http://shodhganga.inflibnet.ac.in/handle/10603/9095

►

A new gastrointestinal mucoadhesive patch system (GIMAPS) has been newlinedesigned for the oral drug delivery of Duloxetine hydrochloride (DLX). The system newlineconsists of four layered… (more)

▼

A new gastrointestinal mucoadhesive patch system (GIMAPS) has been newlinedesigned for the oral drug delivery of Duloxetine hydrochloride (DLX). The system newlineconsists of four layered films, contained in an enteric coated capsule. The backing layer newlineis made of water insoluble polymer ethyl cellulose (EC). The surface layer is made of an newlineenteric pH sensitive polymer such as Eudragit L100 and is coated with an adhesive newlinelayer. The middle layer drug containing layer, made of hydroxypropylmethylcellulose newline(HPMC) is attached to the EC backing layer. The surface layer is attached to the middle newlinelayer by an adhesive layer made of different polymers like carbomers, polycarbophil, newlinesodium carboxymethylcellulose (sodium CMC), hydroxylpropylcellulose (HPC). Drug newlineis dispersed in the drug layer and mucoadhesive layer in required ratios. UV newlinespectroscopy method was validated and was used to determine the drug content and invitro newlinedrug release and ex-vivo permeation studies. High Performance Liquid newlineChromatography (HPLC) method was developed and validated for stability studies. newlineThe developed HPLC method was suitably adopted for the estimation of drugs from newlinerabbit plasma. Linearity was established and this bio analytical method was validated newlinefor accuracy, precision and recovery study. Preformulation studies were carried to newlineidentify and characterize API and excipients. Drug excipient compatibility study did not newlinegive any significant changes indicating that DLX was stable and can be used with the newlineexcipients for formulation development. Batch F6 to F20 was finalized for physical newlineevaluations. GIMAPS batch F6 to F20 showed that percent assay ranged from 98.19% newlineto 101.65% after 24hrs of study. Carbomers played as cross linking agents, that retained newlinemore water and high swelling degree was observed as concentration of polymer newlineincreased. Tensile strength and bioadhesive strength of GIMAPS were evaluated. Best newlineoptimized batch was evaluated for in-vitro and in-vivo evaluations.

References p.

Advisors/Committee Members: Gaud, R S, Thaker, A K.

Subjects/Keywords: Gastro Intestinal Muco Adhesive; Oral Drug delivery

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Bhandary, S. (2013). Design Development and evaluation of Gastro Intestinal Muco Adhesive Patch System GIMAPS for Oral Drug delivery. (Thesis). INFLIBNET. Retrieved from http://shodhganga.inflibnet.ac.in/handle/10603/9095

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Bhandary, Sarita. “Design Development and evaluation of Gastro Intestinal Muco Adhesive Patch System GIMAPS for Oral Drug delivery.” 2013. Thesis, INFLIBNET. Accessed January 22, 2021. http://shodhganga.inflibnet.ac.in/handle/10603/9095.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Bhandary, Sarita. “Design Development and evaluation of Gastro Intestinal Muco Adhesive Patch System GIMAPS for Oral Drug delivery.” 2013. Web. 22 Jan 2021.

Vancouver:

Bhandary S. Design Development and evaluation of Gastro Intestinal Muco Adhesive Patch System GIMAPS for Oral Drug delivery. [Internet] [Thesis]. INFLIBNET; 2013. [cited 2021 Jan 22]. Available from: http://shodhganga.inflibnet.ac.in/handle/10603/9095.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Bhandary S. Design Development and evaluation of Gastro Intestinal Muco Adhesive Patch System GIMAPS for Oral Drug delivery. [Thesis]. INFLIBNET; 2013. Available from: http://shodhganga.inflibnet.ac.in/handle/10603/9095

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Leiden University

24. Hiltemann, Miriam Ame. The glue that binds us together.

Degree: 2012, Leiden University

URL: http://hdl.handle.net/1887/19930

► Abstract This study focuses on the cognitive inferences that can be made through the production of Palaeolithic adhesives. Whereas this production sequence had been linked… (more)

Subjects/Keywords: Glue; Neanderthals; modern humans; adhesive; cognition; Palaeolithic

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Hiltemann, M. A. (2012). The glue that binds us together. (Masters Thesis). Leiden University. Retrieved from http://hdl.handle.net/1887/19930

Chicago Manual of Style (16^th Edition):

Hiltemann, Miriam Ame. “The glue that binds us together.” 2012. Masters Thesis, Leiden University. Accessed January 22, 2021. http://hdl.handle.net/1887/19930.

MLA Handbook (7^th Edition):

Hiltemann, Miriam Ame. “The glue that binds us together.” 2012. Web. 22 Jan 2021.

Vancouver:

Hiltemann MA. The glue that binds us together. [Internet] [Masters thesis]. Leiden University; 2012. [cited 2021 Jan 22]. Available from: http://hdl.handle.net/1887/19930.

Council of Science Editors:

Hiltemann MA. The glue that binds us together. [Masters Thesis]. Leiden University; 2012. Available from: http://hdl.handle.net/1887/19930

Wayne State University

25. Nuwayer, Hasan M. Flexural Creep Behavior Of Adhesively Bonded Metal And Composite Laminates.

Degree: PhD, Mechanical Engineering, 2017, Wayne State University

URL: https://digitalcommons.wayne.edu/oa_dissertations/1854

► Adhesively bonded structures exhibit time dependent behavior when subjected to constant load (creep). In this investigation, long-term creep behavior of adhesively bonded aluminum and… (more)

Subjects/Keywords: Adhesive; Bending; Composites; Creep; Mechanical Engineering

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Nuwayer, H. M. (2017). Flexural Creep Behavior Of Adhesively Bonded Metal And Composite Laminates. (Doctoral Dissertation). Wayne State University. Retrieved from https://digitalcommons.wayne.edu/oa_dissertations/1854

Chicago Manual of Style (16^th Edition):

Nuwayer, Hasan M. “Flexural Creep Behavior Of Adhesively Bonded Metal And Composite Laminates.” 2017. Doctoral Dissertation, Wayne State University. Accessed January 22, 2021. https://digitalcommons.wayne.edu/oa_dissertations/1854.

MLA Handbook (7^th Edition):

Nuwayer, Hasan M. “Flexural Creep Behavior Of Adhesively Bonded Metal And Composite Laminates.” 2017. Web. 22 Jan 2021.

Vancouver:

Nuwayer HM. Flexural Creep Behavior Of Adhesively Bonded Metal And Composite Laminates. [Internet] [Doctoral dissertation]. Wayne State University; 2017. [cited 2021 Jan 22]. Available from: https://digitalcommons.wayne.edu/oa_dissertations/1854.

Council of Science Editors:

Nuwayer HM. Flexural Creep Behavior Of Adhesively Bonded Metal And Composite Laminates. [Doctoral Dissertation]. Wayne State University; 2017. Available from: https://digitalcommons.wayne.edu/oa_dissertations/1854

University of Toronto

26. Ng, Judith. Identification and characterization of adhesive proteins in freshwater mussels towards the development of novel bioadhesives.

Degree: 2018, University of Toronto

URL: http://hdl.handle.net/1807/97676

►

The European freshwater mollusk Dreissena bugensis (quagga mussel) adheres to a variety of underwater surfaces via the byssus, a proteinaceous “anchor”, from which threads are… (more)

Subjects/Keywords: bioadhesion; byssus; DOPA; mussel adhesive proteins; 0541

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Ng, J. (2018). Identification and characterization of adhesive proteins in freshwater mussels towards the development of novel bioadhesives. (Masters Thesis). University of Toronto. Retrieved from http://hdl.handle.net/1807/97676

Chicago Manual of Style (16^th Edition):

Ng, Judith. “Identification and characterization of adhesive proteins in freshwater mussels towards the development of novel bioadhesives.” 2018. Masters Thesis, University of Toronto. Accessed January 22, 2021. http://hdl.handle.net/1807/97676.

MLA Handbook (7^th Edition):

Ng, Judith. “Identification and characterization of adhesive proteins in freshwater mussels towards the development of novel bioadhesives.” 2018. Web. 22 Jan 2021.

Vancouver:

Ng J. Identification and characterization of adhesive proteins in freshwater mussels towards the development of novel bioadhesives. [Internet] [Masters thesis]. University of Toronto; 2018. [cited 2021 Jan 22]. Available from: http://hdl.handle.net/1807/97676.

Council of Science Editors:

Ng J. Identification and characterization of adhesive proteins in freshwater mussels towards the development of novel bioadhesives. [Masters Thesis]. University of Toronto; 2018. Available from: http://hdl.handle.net/1807/97676

Linköping University

27. Ginebre, Emmanuel. Geometry-dependence of the adhesive strength of biomimetic, micropatterned surfaces.

Degree: Mechanics, 2012, Linköping University

URL: http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-81067

► Pressure sensitive adhesive surfaces are often inspired by nature. Miming the toe-surface of gecko, engineered surfaces made of thousands of micro-pillars show promising adhesive… (more)

Subjects/Keywords: Biomimetic; micro-patterned surface; adhesive surfaces; gecko

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Ginebre, E. (2012). Geometry-dependence of the adhesive strength of biomimetic, micropatterned surfaces. (Thesis). Linköping University. Retrieved from http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-81067

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Ginebre, Emmanuel. “Geometry-dependence of the adhesive strength of biomimetic, micropatterned surfaces.” 2012. Thesis, Linköping University. Accessed January 22, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-81067.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Ginebre, Emmanuel. “Geometry-dependence of the adhesive strength of biomimetic, micropatterned surfaces.” 2012. Web. 22 Jan 2021.

Vancouver:

Ginebre E. Geometry-dependence of the adhesive strength of biomimetic, micropatterned surfaces. [Internet] [Thesis]. Linköping University; 2012. [cited 2021 Jan 22]. Available from: http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-81067.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Ginebre E. Geometry-dependence of the adhesive strength of biomimetic, micropatterned surfaces. [Thesis]. Linköping University; 2012. Available from: http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-81067

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

KTH

28. TIMGREN, BEATRICE RUGLAND. Bindemedel i ledningsnät.

Degree: Chemical Science and Engineering (CHE), 2015, KTH

URL: http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-172978

►

Det här projektet har utförts på Scania och är en förstudie till en standardbeskrivning där olika bindemedel i ledningsnät studerats för att kunna användas… (more)

Subjects/Keywords: binder; adhesive; cables; silicone; epoxy; truck

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

TIMGREN, B. R. (2015). Bindemedel i ledningsnät. (Thesis). KTH. Retrieved from http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-172978

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

TIMGREN, BEATRICE RUGLAND. “Bindemedel i ledningsnät.” 2015. Thesis, KTH. Accessed January 22, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-172978.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

TIMGREN, BEATRICE RUGLAND. “Bindemedel i ledningsnät.” 2015. Web. 22 Jan 2021.

Vancouver:

TIMGREN BR. Bindemedel i ledningsnät. [Internet] [Thesis]. KTH; 2015. [cited 2021 Jan 22]. Available from: http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-172978.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

TIMGREN BR. Bindemedel i ledningsnät. [Thesis]. KTH; 2015. Available from: http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-172978

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

29. 半場, 悠介. Preparation and Properties of Fluorescent Orthodontic Adhesives Containing Y₂O₃:Eu³⁺ Particles.

Degree: 博士(歯学), 歯学, 2014, Hokkaido University

URL: http://hdl.handle.net/2115/55835

► Orthodontic adhesives are typically colorless and transparent for aesthetic purposes. The utilization of fluorescence is one of the most effective solutions to make the adhesives… (more)

Subjects/Keywords: fluorescence; lanthanide; europium; yttria oxide; orthodontic adhesive

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

半場, �. (2014). Preparation and Properties of Fluorescent Orthodontic Adhesives Containing Y₂O₃:Eu³⁺ Particles. (Doctoral Dissertation). Hokkaido University. Retrieved from http://hdl.handle.net/2115/55835

Chicago Manual of Style (16^th Edition):

半場, 悠介. “Preparation and Properties of Fluorescent Orthodontic Adhesives Containing Y₂O₃:Eu³⁺ Particles.” 2014. Doctoral Dissertation, Hokkaido University. Accessed January 22, 2021. http://hdl.handle.net/2115/55835.

MLA Handbook (7^th Edition):

半場, 悠介. “Preparation and Properties of Fluorescent Orthodontic Adhesives Containing Y₂O₃:Eu³⁺ Particles.” 2014. Web. 22 Jan 2021.

Vancouver:

半場 �. Preparation and Properties of Fluorescent Orthodontic Adhesives Containing Y₂O₃:Eu³⁺ Particles. [Internet] [Doctoral dissertation]. Hokkaido University; 2014. [cited 2021 Jan 22]. Available from: http://hdl.handle.net/2115/55835.

Council of Science Editors:

半場 �. Preparation and Properties of Fluorescent Orthodontic Adhesives Containing Y₂O₃:Eu³⁺ Particles. [Doctoral Dissertation]. Hokkaido University; 2014. Available from: http://hdl.handle.net/2115/55835

Florida Atlantic University

30. Kabaluk, Maksim. Adhesive Joint Analyses Using Ansys CZM Modeling of a Prefabricated Hybrid Concrete-GFRP-CFRP Unit.

Degree: MS, 2019, Florida Atlantic University

URL: http://fau.digital.flvc.org/islandora/object/fau:41361

►

The present study reviews applications of FRP materials joined by structural adhesives in civil engineering. FE analysis with mix-mode cohesive zone material model (CZM) was… (more)

Subjects/Keywords: Adhesive joints; Fiber reinforced polymers; Composites; Concrete

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Kabaluk, M. (2019). Adhesive Joint Analyses Using Ansys CZM Modeling of a Prefabricated Hybrid Concrete-GFRP-CFRP Unit. (Masters Thesis). Florida Atlantic University. Retrieved from http://fau.digital.flvc.org/islandora/object/fau:41361

Chicago Manual of Style (16^th Edition):

Kabaluk, Maksim. “Adhesive Joint Analyses Using Ansys CZM Modeling of a Prefabricated Hybrid Concrete-GFRP-CFRP Unit.” 2019. Masters Thesis, Florida Atlantic University. Accessed January 22, 2021. http://fau.digital.flvc.org/islandora/object/fau:41361.

MLA Handbook (7^th Edition):

Kabaluk, Maksim. “Adhesive Joint Analyses Using Ansys CZM Modeling of a Prefabricated Hybrid Concrete-GFRP-CFRP Unit.” 2019. Web. 22 Jan 2021.

Vancouver:

Kabaluk M. Adhesive Joint Analyses Using Ansys CZM Modeling of a Prefabricated Hybrid Concrete-GFRP-CFRP Unit. [Internet] [Masters thesis]. Florida Atlantic University; 2019. [cited 2021 Jan 22]. Available from: http://fau.digital.flvc.org/islandora/object/fau:41361.

Council of Science Editors:

Kabaluk M. Adhesive Joint Analyses Using Ansys CZM Modeling of a Prefabricated Hybrid Concrete-GFRP-CFRP Unit. [Masters Thesis]. Florida Atlantic University; 2019. Available from: http://fau.digital.flvc.org/islandora/object/fau:41361

Open Access Theses and Dissertations