subject:(Serial data communication)

Hong Kong University of Science and Technology

1. Ng, Wai Chiu ECE. High speed serial link IC for high throughput sensory application.

Degree: 2018, Hong Kong University of Science and Technology

URL: http://repository.ust.hk/ir/Record/1783.1-93168 ; https://doi.org/10.14711/thesis-991012615969003412 ; http://repository.ust.hk/ir/bitstream/1783.1-93168/1/th_redirect.html

► In recent years, the increasing demand for ultra-high-definition complementary metal-oxide-semiconductor (CMOS) image sensors (UHD-CISs), as well as a very high image quality for these sensors… (more)

▼ In recent years, the increasing demand for ultra-high-definition complementary metal-oxide-semiconductor (CMOS) image sensors (UHD-CISs), as well as a very high image quality for these sensors is the result of expanding application areas such as driver assistance systems, smartphones, robot guidance and security surveillance. The resolution of a UHD-CIS in such applications is up to 33M pixels for 8K video quality, causing the UHD-CIS to generate a signal more of than a Giga-bit per second. Therefore, UHD-CIS systems require high-speed data links in device-to-device communication interfaces. However, existing wireless communication cannot meet this increased data rate. To address this problem, this study aims to develop an optical wireless communication receiver for high-throughput sensory applications. The receiver consists of a receiver analog front end and a digital based clock and data recovery (CDR). Firstly, an 1 – 8 Gb/s optical wireless communication receiver analog front end with a configurable transimpedance amplifier is designed in a 65 nm CMOS process. The configurable transimpedance amplifier has two operation modes to accommodate optical wireless environments. The proposed receiver in high-sensitivity mode is designed for long distance data transmission, whereas the receiver in high-speed data mode is designed for short range high speed communication. A noise optimization scheme of the receiver for optical wireless communication is also presented in this thesis. The noise power of the proposed receiver is optimized in both operation modes. Noise performance of the noise-optimized transimpedance amplifier is theoretically three times smaller than that of a conventional 1^st-order transimpedance amplifier. The receiver achieves 60 𝑛𝐴_𝑟𝑚𝑠 input current noise at 1 Gb/s in high-sensitivity mode and 0.9 𝜇𝐴_𝑟𝑚𝑠 input current noise at 8 Gb/s in high-speed data mode. In the second part of this thesis, a CDR fabricated in a 65 nm CMOS process is designed for the optical wireless communication receiver to extract the timing information from the output of the analog front end. It is a 2 Gb/s – 8 Gb/s phase interpolator CDR with burst-mode multi-bit phase detection. The proposed technique accelerates the phase acquisition by compensating for the initial phase error. The phase acquisition time can be less than 16 UI. Therefore, the proposed design allows burst operation and is ready for multi-channel applications with the jitter of a recovered clock of 6.8 𝑝𝑠_𝑟𝑚𝑠 at 2 Gb/s and 3 𝑝𝑠_𝑟𝑚𝑠 at 8 Gb/s.

Subjects/Keywords: Optical communications ; Serial communications ; Wireless communication systems ; Electronic data processing ; Detectors ; Metal oxide semiconductors, Complementary

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Ng, W. C. E. (2018). High speed serial link IC for high throughput sensory application. (Thesis). Hong Kong University of Science and Technology. Retrieved from http://repository.ust.hk/ir/Record/1783.1-93168 ; https://doi.org/10.14711/thesis-991012615969003412 ; http://repository.ust.hk/ir/bitstream/1783.1-93168/1/th_redirect.html

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Ng, Wai Chiu ECE. “High speed serial link IC for high throughput sensory application.” 2018. Thesis, Hong Kong University of Science and Technology. Accessed January 22, 2021. http://repository.ust.hk/ir/Record/1783.1-93168 ; https://doi.org/10.14711/thesis-991012615969003412 ; http://repository.ust.hk/ir/bitstream/1783.1-93168/1/th_redirect.html.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Ng, Wai Chiu ECE. “High speed serial link IC for high throughput sensory application.” 2018. Web. 22 Jan 2021.

Vancouver:

Ng WCE. High speed serial link IC for high throughput sensory application. [Internet] [Thesis]. Hong Kong University of Science and Technology; 2018. [cited 2021 Jan 22]. Available from: http://repository.ust.hk/ir/Record/1783.1-93168 ; https://doi.org/10.14711/thesis-991012615969003412 ; http://repository.ust.hk/ir/bitstream/1783.1-93168/1/th_redirect.html.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Ng WCE. High speed serial link IC for high throughput sensory application. [Thesis]. Hong Kong University of Science and Technology; 2018. Available from: http://repository.ust.hk/ir/Record/1783.1-93168 ; https://doi.org/10.14711/thesis-991012615969003412 ; http://repository.ust.hk/ir/bitstream/1783.1-93168/1/th_redirect.html

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

2. Řeháček, Tomáš. Datový koncentrátor ve VHDL: Serial Data concentrator in VHDL.

Degree: 2014, Brno University of Technology

URL: http://hdl.handle.net/11012/27551

► In the bachelor’s thesis text there are summarized basics of VHDL language, ISE Webpack development environment is described. Also the way of communication and properties… (more)

Subjects/Keywords: VHDL; datový koncentrátor; sériová komunikace; Ethernet; IPv4; UDP; CRC; MII; VHDL; data concentrator; serial communication; Ethernet; IPv4; UDP; CRC; MII

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Řeháček, T. (2014). Datový koncentrátor ve VHDL: Serial Data concentrator in VHDL. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/27551

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Řeháček, Tomáš. “Datový koncentrátor ve VHDL: Serial Data concentrator in VHDL.” 2014. Thesis, Brno University of Technology. Accessed January 22, 2021. http://hdl.handle.net/11012/27551.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Řeháček, Tomáš. “Datový koncentrátor ve VHDL: Serial Data concentrator in VHDL.” 2014. Web. 22 Jan 2021.

Vancouver:

Řeháček T. Datový koncentrátor ve VHDL: Serial Data concentrator in VHDL. [Internet] [Thesis]. Brno University of Technology; 2014. [cited 2021 Jan 22]. Available from: http://hdl.handle.net/11012/27551.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Řeháček T. Datový koncentrátor ve VHDL: Serial Data concentrator in VHDL. [Thesis]. Brno University of Technology; 2014. Available from: http://hdl.handle.net/11012/27551

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

3. Andrade, Ricardo de. Sistemas de comunicação CAN FD: modelamento por software e análise temporal.

Degree: Mestrado, Microeletrônica, 2014, University of São Paulo

URL: http://www.teses.usp.br/teses/disponiveis/3/3140/tde-06082015-111553/ ;

►

O CAN (Controller Area Network) é um padrão no barramento de comunicação, amplamente difundido em aplicações industriais, particularmente em sistemas automotivos. Atualmente, um dos principais… (more)

▼

O CAN (Controller Area Network) é um padrão no barramento de comunicação, amplamente difundido em aplicações industriais, particularmente em sistemas automotivos. Atualmente, um dos principais problemas no ramo automotivo é que esse barramento está com muitas mensagens no barramento, resultado da incorporação incremental de sistemas eletrônicos em automóveis, visto que há uma exigência maior de conectividade devido às exigências da sociedade e mercado. Como alternativa, vem sendo desenvolvida uma nova rede de comunicação, conhecida como CAN with Flexible Data-Rate (CAN-FD), que é um barramento com velocidade de transmissão de informação mais alta e maior capacidade de transporte de dados. Este projeto tem por objetivo principal explorar as funcionalidades da rede CAN-FD, através de simulações do trânsito de mensagens numa rede CAN-FD usando os dados de uma rede real CAN, e verificando a previsibilidade de ambas no âmbito de um protocolo que possa atender à demanda de sistemas complexos. A comparação é executada a partir de um conjunto de mensagens adicionadas na rede, para verificar os limites de transmissão de cada uma das redes, e os respectivos tempos de atraso das mensagens. Como um segundo estudo de caso, uma rede de controle em malha fechada foi desenvolvida, conectada a um barramento CAN e um barramento CAN-FD. Essa técnica de controle permitiu eliminar os ruídos que interferem no controle, e checar o limite em que o protocolo de comunicação consegue manter em uma malha de controle funcionando. Os resultados mostraram que é possível transmitir uma imensa quantidade de dados com o menor uso do busload (quantidade de mensagens transmitidas) no veículo através do uso do barramento CAN-FD, porém ainda não foi lançado no mercado um controlador do CAN-FD para realizar essa tarefa. Por outro lado, os dois protocolos, CAN-FD e CAN, tem suas previsibilidades comprometidas pois não conseguem enviar a mensagem quando o barramento está superior a 98,86% de carga.

The CAN (Controller Area Network) is a standard in the communication bus, widespread in industrial applications, particularly in automotive systems. Currently, one of the main problems in the automotive industry is that this bus is with many messages on the bus, the result of incremental incorporation of electronic systems in automobiles, since there is a greater demand for connectivity due to the demands of society and the market. Alternatively, it has been developed a new communications network, known as CAN with Flexible Data-Rate (CAN-FD), which is a bus with transmission speeds higher and higher capacity data transport information. This project\'s main objective is to explore the features of the network CAN-FD, through simulations of the traffic of messages on a CAN network FD using data from a real CAN network, and verifying the predictability both in the context of a protocol that can meet the demand complex systems. The comparison is performed from a set of messages added to the network to verify the boundaries of each of the transmission networks and…

Advisors/Committee Members: Justo Filho, João Francisco.

Subjects/Keywords: Automotive electronics; Automotive networks; CAN; CAN; CAN Bus; CAN Bus; CANFD; CANFD; Communication Networks CAN-FD; Comunicação serial de dados; Controller Area Network; Eletrônica automotiva; Eletrônica embarcada; Embedded electronics; Redes automotivas; Redes de comunicação CAN-FD; Serial communication of data

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Andrade, R. d. (2014). Sistemas de comunicação CAN FD: modelamento por software e análise temporal. (Masters Thesis). University of São Paulo. Retrieved from http://www.teses.usp.br/teses/disponiveis/3/3140/tde-06082015-111553/ ;

Chicago Manual of Style (16^th Edition):

Andrade, Ricardo de. “Sistemas de comunicação CAN FD: modelamento por software e análise temporal.” 2014. Masters Thesis, University of São Paulo. Accessed January 22, 2021. http://www.teses.usp.br/teses/disponiveis/3/3140/tde-06082015-111553/ ;.

MLA Handbook (7^th Edition):

Andrade, Ricardo de. “Sistemas de comunicação CAN FD: modelamento por software e análise temporal.” 2014. Web. 22 Jan 2021.

Vancouver:

Andrade Rd. Sistemas de comunicação CAN FD: modelamento por software e análise temporal. [Internet] [Masters thesis]. University of São Paulo; 2014. [cited 2021 Jan 22]. Available from: http://www.teses.usp.br/teses/disponiveis/3/3140/tde-06082015-111553/ ;.

Council of Science Editors:

Andrade Rd. Sistemas de comunicação CAN FD: modelamento por software e análise temporal. [Masters Thesis]. University of São Paulo; 2014. Available from: http://www.teses.usp.br/teses/disponiveis/3/3140/tde-06082015-111553/ ;

Indian Institute of Science

4. Samar, *. On Asymmetric Distributed Source Coding For Wireless Sensor Networks.

Degree: PhD, Faculty of Engineering, 2011, Indian Institute of Science

URL: http://etd.iisc.ac.in/handle/2005/1011

► We are concerned with addressing the worst-case distributed source coding (DSC) problem in asymmetric and interactive communication scenarios and its application to data-gathering wireless sensor… (more)

▼ We are concerned with addressing the worst-case distributed source coding (DSC) problem in asymmetric and interactive communication scenarios and its application to data-gathering wireless sensor networks in enhancing their lifetime. First, we propose a unified canonical framework, obtained by considering different communication constraints and objectives, to address the variants of DSC problem. Second, as for the worst-case information-theoretic analysis, the notion of information entropy cannot be used, we propose information ambiguity, derive its various properties, and prove that it is a valid information measure. Third, for a few variants of our interest of DSC problem, we provide the communication protocols and prove their optimality. In a typical data-gathering sensor network, the base-station that wants to gather sensor data is often assumed to be much more resourceful with respect to energy, computation, and communication capabilities compared to sensor nodes. Therefore, we argue that in such networks, the base-station should bear the most of the burden of communication and computation in the network. Allowing the base-station and sensor nodes to interactively communicate with each other enables us to carry this out. Our definition of sensor network lifetime allows us to reduce the problem of maximizing the worst-case network lifetime to the problem of minimizing the number of bits communicated by the nodes in the worst-case, which is further reduced to the worst-case DSC problem in asymmetric and interactive communication scenarios, with the assumption that the base-station knows the support-set of sensor data. We demonstrate that the optimal solutions of the energy-oblivious DSC problem variants cannot be directly applied to the data-gathering sensor networks, as those may be inefficient in the energy-constrained sensor networks. We address a few energy-efficient variants of DSC problem and provide optimal communication protocols for the sensor networks, based on those variants. Finally, we combine distributed source coding with two other system level opportunities of channel coding and cooperative nature of the nodes to further enhance the lifetime of the sensor networks. We address various scenarios and demonstrate the dependence of the computational complexity of the network lifetime maximization problem on the complex interplay of above system-level opportunities. Advisors/Committee Members: Jamadagni, H S (advisor).

Subjects/Keywords: Wireless Networks - Distributed Coding; Wireless Sensor Networks; Communication Protocols; Data-gathering Sensor Networks; Information Ambiguity; Distributed Source Coding (DSC); Asymmetric Communication; Interactive Communication; Parallel Communication; Serial Communication; Multiple Informants - Single Recipient (MISR); Sensor Networks; Communication Engineering

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Samar, *. (2011). On Asymmetric Distributed Source Coding For Wireless Sensor Networks. (Doctoral Dissertation). Indian Institute of Science. Retrieved from http://etd.iisc.ac.in/handle/2005/1011

Chicago Manual of Style (16^th Edition):

Samar, *. “On Asymmetric Distributed Source Coding For Wireless Sensor Networks.” 2011. Doctoral Dissertation, Indian Institute of Science. Accessed January 22, 2021. http://etd.iisc.ac.in/handle/2005/1011.

MLA Handbook (7^th Edition):

Samar, *. “On Asymmetric Distributed Source Coding For Wireless Sensor Networks.” 2011. Web. 22 Jan 2021.

Vancouver:

Samar *. On Asymmetric Distributed Source Coding For Wireless Sensor Networks. [Internet] [Doctoral dissertation]. Indian Institute of Science; 2011. [cited 2021 Jan 22]. Available from: http://etd.iisc.ac.in/handle/2005/1011.

Council of Science Editors:

Samar *. On Asymmetric Distributed Source Coding For Wireless Sensor Networks. [Doctoral Dissertation]. Indian Institute of Science; 2011. Available from: http://etd.iisc.ac.in/handle/2005/1011

Brno University of Technology

5. Slovák, Jiří. Datové přenosy v sítích GPRS a EDGE: Data transmission in GPRS and EDGE networks.

Degree: 2019, Brno University of Technology

URL: http://hdl.handle.net/11012/10099

► The thesis is conceived as a part of the laboratory task innovation in subject Radio and mobile communications. The main part of the project is… (more)

Subjects/Keywords: GSM; GPRS; EDGE; Datové přenosy; Modem; Sériová komunikace; AT příkaz; MATLAB; GSM; GPRS; EDGE; Data transmissions; Modem; Serial Communication; AT command; MATLAB

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Slovák, J. (2019). Datové přenosy v sítích GPRS a EDGE: Data transmission in GPRS and EDGE networks. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/10099

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Slovák, Jiří. “Datové přenosy v sítích GPRS a EDGE: Data transmission in GPRS and EDGE networks.” 2019. Thesis, Brno University of Technology. Accessed January 22, 2021. http://hdl.handle.net/11012/10099.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Slovák, Jiří. “Datové přenosy v sítích GPRS a EDGE: Data transmission in GPRS and EDGE networks.” 2019. Web. 22 Jan 2021.

Vancouver:

Slovák J. Datové přenosy v sítích GPRS a EDGE: Data transmission in GPRS and EDGE networks. [Internet] [Thesis]. Brno University of Technology; 2019. [cited 2021 Jan 22]. Available from: http://hdl.handle.net/11012/10099.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Slovák J. Datové přenosy v sítích GPRS a EDGE: Data transmission in GPRS and EDGE networks. [Thesis]. Brno University of Technology; 2019. Available from: http://hdl.handle.net/11012/10099

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

6. Zošiak, Dušan. Analýza USB rozhraní: USB communication protocol analysis.

Degree: 2018, Brno University of Technology

URL: http://hdl.handle.net/11012/7375

► Tato práce je zaměřena na zpracování a analýzu USB komunikačního protokolu a implementace jeho jednotlivých částí do FPGA obvodu s využitím programovacího jazyka VHDL. Ve… (more)

Subjects/Keywords: USB; Univerzální sériová sběrnice; přenos dat; datové pakety; zpracování dát; USB komunikace; implementace; VHDL; FPGA; ASIC; USB; Universal serial bus; data transfer; data packets; data handling; USB communication; implementation; FPGA; VHDL; ASIC

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Zošiak, D. (2018). Analýza USB rozhraní: USB communication protocol analysis. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/7375

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Zošiak, Dušan. “Analýza USB rozhraní: USB communication protocol analysis.” 2018. Thesis, Brno University of Technology. Accessed January 22, 2021. http://hdl.handle.net/11012/7375.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Zošiak, Dušan. “Analýza USB rozhraní: USB communication protocol analysis.” 2018. Web. 22 Jan 2021.

Vancouver:

Zošiak D. Analýza USB rozhraní: USB communication protocol analysis. [Internet] [Thesis]. Brno University of Technology; 2018. [cited 2021 Jan 22]. Available from: http://hdl.handle.net/11012/7375.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Zošiak D. Analýza USB rozhraní: USB communication protocol analysis. [Thesis]. Brno University of Technology; 2018. Available from: http://hdl.handle.net/11012/7375

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

7. Guo, Fei. Development of the real-time data acquisition system for Philips Patient Monitor.

Degree: MSs, EECS - Electrical Engineering, 2014, Case Western Reserve University School of Graduate Studies

URL: http://rave.ohiolink.edu/etdc/view?acc_num=case1405963966

► Effective acquisition and use of patient data in the Intensive Care Unit (ICU) is complex, involving the collection, interpretation and analysis of large volumes of… (more)

Subjects/Keywords: Electrical Engineering; Data Acquisition, Physiological data, ICU, Patient Monitor, Serial Communication

…System for the IntelliVue Philips Patient Monitor via serial communication. The Data… …outcomes. Keywords Data Acquisition, Physiological data, ICU, Patient Monitor, Serial… …Development of the real-time data acquisition system for Philips Patient Monitor Abstract… …by FEI GUO Effective acquisition and use of patient data in the Intensive Care Unit (… …of high frequency physiological data provided by ICU monitors and devices. Data Acquisition…

10 more images…

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Guo, F. (2014). Development of the real-time data acquisition system for Philips Patient Monitor. (Masters Thesis). Case Western Reserve University School of Graduate Studies. Retrieved from http://rave.ohiolink.edu/etdc/view?acc_num=case1405963966

Chicago Manual of Style (16^th Edition):

Guo, Fei. “Development of the real-time data acquisition system for Philips Patient Monitor.” 2014. Masters Thesis, Case Western Reserve University School of Graduate Studies. Accessed January 22, 2021. http://rave.ohiolink.edu/etdc/view?acc_num=case1405963966.

MLA Handbook (7^th Edition):

Guo, Fei. “Development of the real-time data acquisition system for Philips Patient Monitor.” 2014. Web. 22 Jan 2021.

Vancouver:

Guo F. Development of the real-time data acquisition system for Philips Patient Monitor. [Internet] [Masters thesis]. Case Western Reserve University School of Graduate Studies; 2014. [cited 2021 Jan 22]. Available from: http://rave.ohiolink.edu/etdc/view?acc_num=case1405963966.

Council of Science Editors:

Guo F. Development of the real-time data acquisition system for Philips Patient Monitor. [Masters Thesis]. Case Western Reserve University School of Graduate Studies; 2014. Available from: http://rave.ohiolink.edu/etdc/view?acc_num=case1405963966

8. Zaklouta, Ahmadmunthar. High-Speed Communication Scheme in OSI Layer 2 Research and Implementation.

Degree: Electrical Engineering and Computer Science (EECS), 2019, KTH

URL: http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-254398

►

This thesis is part of a project at Bombardier’s Object Controller System. This system acts as a communication interface for several sub-systems that control… (more)

▼

This thesis is part of a project at Bombardier’s Object Controller System. This system acts as a communication interface for several sub-systems that control the railway traffic. Therefore, part of the safety and availability of railway transportation is dependent on the performance and reliability of this system especially the digital communication system that handles the board-to-board communication. Thus, Bombardier has implemented new high-speed LVDS channels to use instead of the implemented RS-485 channels to improve the board-to-board communication performance in the Object Controller System but they lack a transceiver. This thesis work explores possible transceiver solutions that achieve Bombardier requirements. Reusability is very important for Bombardier for safety compliance and certification. Therefore, the investigation was carried out by looking into what is currently implemented and then was carried on by looking into transceivers that used in highspeed communication and check their suitability and compliance for the FPGA and the requirements. This exploration results in three experiments for different transceiver architecture. The first experiment exploits the currently implemented transceiver architecture and it is not suitable for high-speed data rate due to a limitation in the buffer. The second experiment overcomes the buffer limitation by using a clock domain crossing buffer and results in a 100-time faster system. The third experiment aimed to achieve a higher data rate by using a clock and data recovery transceiver and results in a promising solution but needs some enhancements. For testing, a verification methodology following the one-way stress test architecture has been developed using VHDL for simulation and for in-chip testing and the results were verified using ChipScope logic analyzer from Xilinx. In addition, a thermal test for the solution from the second experiment has been performed.

Denna avhandling är en del av ett projekt på Bombardiers Object Controller System. Detta system fungerar som ett kommunikationsgränssnitt för flera delsystem som styr järnvägstrafiken. Därför är en del av säkerheten och tillgängligheten av järnvägstransporten beroende av systemets prestanda och tillförlitlighet, särskilt det digitala kommunikationssystemet som hanterar kommunikationen ombord. Bombardier har sålunda implementerat nya höghastighets LVDS-kanaler för att använda istället för de implementerade RS-485-kanalerna för att förbättra kommunikationsprestandan ombord i objektkontrollen, men de saknar en transceiver. Denna avhandling arbetar med att undersöka möjliga transceiverlösningar som uppnår Bombardier-krav. Återanvändbarhet är mycket viktigt för Bombardier för säkerhetsöverensstämmelse och certifiering. Undersökningen genomfördes därför genom att undersöka vad som för närvarande implementeras och sedan genomföras genom att titta på transceivers som används i höghastighetskommunikation och kontrollera deras lämplighet och överensstämmelse för FPGA och kraven. Denna undersökning…

Subjects/Keywords: FPGA; CDR; High-Speed Serial Communication; BER; CDC; UART; Computer and Information Sciences; Data- och informationsvetenskap

…Clock Data Recovery (CDR) The highest priority in serial communication goes to… …communication applications. The transmitter serializes the parallel data into serial data by… …15 FIGURE 3: PARALLEL DATA TRANSFER VS SERIAL DATA TRANSFER [3]… …circuit Hardware Description Language Design Under Test Universal Serial Bus Communication… …Implementation testing a communication system that achieves maximum data rate on LVDS-Link channels in…

10 more images…

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Zaklouta, A. (2019). High-Speed Communication Scheme in OSI Layer 2 Research and Implementation. (Thesis). KTH. Retrieved from http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-254398

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Zaklouta, Ahmadmunthar. “High-Speed Communication Scheme in OSI Layer 2 Research and Implementation.” 2019. Thesis, KTH. Accessed January 22, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-254398.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Zaklouta, Ahmadmunthar. “High-Speed Communication Scheme in OSI Layer 2 Research and Implementation.” 2019. Web. 22 Jan 2021.

Vancouver:

Zaklouta A. High-Speed Communication Scheme in OSI Layer 2 Research and Implementation. [Internet] [Thesis]. KTH; 2019. [cited 2021 Jan 22]. Available from: http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-254398.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Zaklouta A. High-Speed Communication Scheme in OSI Layer 2 Research and Implementation. [Thesis]. KTH; 2019. Available from: http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-254398

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

9. Škrob, Robin. Digitalizace snímaní rozložení optické intenzity: Digitalization of the optical intensity distribution scanning.

Degree: 2019, Brno University of Technology

URL: http://hdl.handle.net/11012/25429

► This Master’s thesis solves a design and construction of device for gathering and transfer of data into computer. The device should replace graph plotter, by… (more)

Subjects/Keywords: Sběrač dat; A/D převodník; mikrokontrolér ATmega 128; laserový paprsek; snímání rozložení optické intenzity; komunikace po sériové lince; Data gatherer; A/D converter; micro controller Atmega 128; laser beam; optical intensity distribution scanning; communication through serial line

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Škrob, R. (2019). Digitalizace snímaní rozložení optické intenzity: Digitalization of the optical intensity distribution scanning. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/25429

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Škrob, Robin. “Digitalizace snímaní rozložení optické intenzity: Digitalization of the optical intensity distribution scanning.” 2019. Thesis, Brno University of Technology. Accessed January 22, 2021. http://hdl.handle.net/11012/25429.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Škrob, Robin. “Digitalizace snímaní rozložení optické intenzity: Digitalization of the optical intensity distribution scanning.” 2019. Web. 22 Jan 2021.

Vancouver:

Škrob R. Digitalizace snímaní rozložení optické intenzity: Digitalization of the optical intensity distribution scanning. [Internet] [Thesis]. Brno University of Technology; 2019. [cited 2021 Jan 22]. Available from: http://hdl.handle.net/11012/25429.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Škrob R. Digitalizace snímaní rozložení optické intenzity: Digitalization of the optical intensity distribution scanning. [Thesis]. Brno University of Technology; 2019. Available from: http://hdl.handle.net/11012/25429

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

10. Hudec, David. Generátor M2M dat bezdrátového protokolu Wireless M-BUS v SmartGrid: Implementation of M2M Data Generator Utilizing Communication Protocol Wireless M-BUS in Smart Grid Infrastructure.

Degree: 2019, Brno University of Technology

URL: http://hdl.handle.net/11012/80808

► Presented thesis describes the communication protocol of Wireless M-Bus, especially its data contents, field structure, communication modes and other data-link layer and application layer details.… (more)

Subjects/Keywords: Generátor dat; IQRF; Java; jSSC; komunikace sériovým portem; M2M; M-Bus; UniPi; UniPi Neuron; Wireless M-Bus; Data generator; IQRF; Java; jSSC; M2M; M-Bus; serial port communication; UniPi; UniPi Neuron; Wireless M-Bus

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Hudec, D. (2019). Generátor M2M dat bezdrátového protokolu Wireless M-BUS v SmartGrid: Implementation of M2M Data Generator Utilizing Communication Protocol Wireless M-BUS in Smart Grid Infrastructure. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/80808

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Hudec, David. “Generátor M2M dat bezdrátového protokolu Wireless M-BUS v SmartGrid: Implementation of M2M Data Generator Utilizing Communication Protocol Wireless M-BUS in Smart Grid Infrastructure.” 2019. Thesis, Brno University of Technology. Accessed January 22, 2021. http://hdl.handle.net/11012/80808.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Hudec, David. “Generátor M2M dat bezdrátového protokolu Wireless M-BUS v SmartGrid: Implementation of M2M Data Generator Utilizing Communication Protocol Wireless M-BUS in Smart Grid Infrastructure.” 2019. Web. 22 Jan 2021.

Vancouver:

Hudec D. Generátor M2M dat bezdrátového protokolu Wireless M-BUS v SmartGrid: Implementation of M2M Data Generator Utilizing Communication Protocol Wireless M-BUS in Smart Grid Infrastructure. [Internet] [Thesis]. Brno University of Technology; 2019. [cited 2021 Jan 22]. Available from: http://hdl.handle.net/11012/80808.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Hudec D. Generátor M2M dat bezdrátového protokolu Wireless M-BUS v SmartGrid: Implementation of M2M Data Generator Utilizing Communication Protocol Wireless M-BUS in Smart Grid Infrastructure. [Thesis]. Brno University of Technology; 2019. Available from: http://hdl.handle.net/11012/80808

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

11. Jankech, Tomáš. Záznamník přenesených dat pro sériové komunikační linky: Data logger for serial communication lines.

Degree: 2018, Brno University of Technology

URL: http://hdl.handle.net/11012/27310

► The aim of bachelor’s thesis is the realization of data logger for serial communication lines. This paper describes basic concepts of serial communication and looks… (more)

Subjects/Keywords: Záznamník; dáta; sériová komunikácia; RS232; RS485; metódy pre záznam; prevodník; ukladanie; prenosová rýchlosť; bitová rýchlosť; Logger; data; serial communication; RS232; RS485; method of logging; converter; saving; baud rate; bit rate; Eagle

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Jankech, T. (2018). Záznamník přenesených dat pro sériové komunikační linky: Data logger for serial communication lines. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/27310

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Jankech, Tomáš. “Záznamník přenesených dat pro sériové komunikační linky: Data logger for serial communication lines.” 2018. Thesis, Brno University of Technology. Accessed January 22, 2021. http://hdl.handle.net/11012/27310.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Jankech, Tomáš. “Záznamník přenesených dat pro sériové komunikační linky: Data logger for serial communication lines.” 2018. Web. 22 Jan 2021.

Vancouver:

Jankech T. Záznamník přenesených dat pro sériové komunikační linky: Data logger for serial communication lines. [Internet] [Thesis]. Brno University of Technology; 2018. [cited 2021 Jan 22]. Available from: http://hdl.handle.net/11012/27310.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Jankech T. Záznamník přenesených dat pro sériové komunikační linky: Data logger for serial communication lines. [Thesis]. Brno University of Technology; 2018. Available from: http://hdl.handle.net/11012/27310

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

12. Zatloukal, Martin. Implementace ZigBee zařízení v automobilovém průmyslu: ZigBee implementation for Automotive Industry.

Degree: 2019, Brno University of Technology

URL: http://hdl.handle.net/11012/14204

► This bachelor’s thesis describes possibilities of usage of ZigBee communication protocol in automotive industry, transport and logistics. Thesis also deals with ways of practical implementation… (more)

Subjects/Keywords: ZigBee; Ethernet; XBee; MaxStream; Radiocrafts; komunikační schéma; přijímač infrastruktury; přijímač automobilu; mobilní vysílač; zdrojový kód; sériové programování; AT mód; API mód; transparentní mód; paket; datový tok; Terminal; rámec; vysílání; komunikace; ZigBee; Ethernet; XBee; MaxStream; Radiocrafts; communication scheme; infrastructure receiver; car receiver; mobile transmitter; source code; serial programming; AT mode; API mode; Transparent mode; packet; data flow; Terminal; frame; broadcasting; communication

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Zatloukal, M. (2019). Implementace ZigBee zařízení v automobilovém průmyslu: ZigBee implementation for Automotive Industry. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/14204

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Zatloukal, Martin. “Implementace ZigBee zařízení v automobilovém průmyslu: ZigBee implementation for Automotive Industry.” 2019. Thesis, Brno University of Technology. Accessed January 22, 2021. http://hdl.handle.net/11012/14204.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Zatloukal, Martin. “Implementace ZigBee zařízení v automobilovém průmyslu: ZigBee implementation for Automotive Industry.” 2019. Web. 22 Jan 2021.

Vancouver:

Zatloukal M. Implementace ZigBee zařízení v automobilovém průmyslu: ZigBee implementation for Automotive Industry. [Internet] [Thesis]. Brno University of Technology; 2019. [cited 2021 Jan 22]. Available from: http://hdl.handle.net/11012/14204.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Zatloukal M. Implementace ZigBee zařízení v automobilovém průmyslu: ZigBee implementation for Automotive Industry. [Thesis]. Brno University of Technology; 2019. Available from: http://hdl.handle.net/11012/14204

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Karlstad University

13. Hjern, Gunnar. The modernization of a DOS-basedtime critical solar cell LBICmeasurement system.

Degree: Karlstad University, 2019, Karlstad University

URL: http://urn.kb.se/resolve?urn=urn:nbn:se:kau:diva-74322

► LBIC is a technique for scanning the local quantum efficiency of solar cells. This kind of measurements needs a highly specialized, and time critical… (more)

Subjects/Keywords: Pascal programming language; Linux; operating system; real-time; PREEMPT_RT patch; Free Pascal compiler; Lazarus; multi-threading; computer controlled measurements; false color map; refactoring; software modernization; adaptation layer; MS-DOS; GPIB; IEEE-488; silicon solar cell; quantum efficiency; LBIC; electron recombination; serial communication; micro-controller; ISR; incremental encoder; lock-in amplifier; trans-impedance amplifier; triggered measurement; Computer and Information Sciences; Data- och informationsvetenskap

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Hjern, G. (2019). The modernization of a DOS-basedtime critical solar cell LBICmeasurement system. (Thesis). Karlstad University. Retrieved from http://urn.kb.se/resolve?urn=urn:nbn:se:kau:diva-74322

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Hjern, Gunnar. “The modernization of a DOS-basedtime critical solar cell LBICmeasurement system.” 2019. Thesis, Karlstad University. Accessed January 22, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:kau:diva-74322.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Hjern, Gunnar. “The modernization of a DOS-basedtime critical solar cell LBICmeasurement system.” 2019. Web. 22 Jan 2021.

Vancouver:

Hjern G. The modernization of a DOS-basedtime critical solar cell LBICmeasurement system. [Internet] [Thesis]. Karlstad University; 2019. [cited 2021 Jan 22]. Available from: http://urn.kb.se/resolve?urn=urn:nbn:se:kau:diva-74322.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Hjern G. The modernization of a DOS-basedtime critical solar cell LBICmeasurement system. [Thesis]. Karlstad University; 2019. Available from: http://urn.kb.se/resolve?urn=urn:nbn:se:kau:diva-74322

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

University of Illinois – Urbana-Champaign

14. Shu, Guanghua. Energy-efficient wireline transceivers.

Degree: PhD, Electrical & Computer Engr, 2016, University of Illinois – Urbana-Champaign

URL: http://hdl.handle.net/2142/95549

► Power-efficient wireline transceivers are highly demanded by many applications in high performance computation and communication systems. Apart from transferring a wide range of data rates… (more)

Subjects/Keywords: Data communication; High speed serial link; Wireline transceiver; Continuous-rate receiver; Clock and data recovery; Reference-less CDR; Digital CDR; Jitter peaking; Decouple JTRAN/JTOL; Phase-rotating PLL; Phase interpolator; Digitally controlled oscillator (DCO); Supply regulator; Active repeater; Optical links; Energy proportional links; Matched source synchronous clocking; Rapid on/off clock generator; Multiplaying delay-locked loop (MDLL); Dynamic voltage and frequency scaling (DVFS); Rapid on/off (ROO); Alpha-power law model; Leakage power; Exit latency

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Shu, G. (2016). Energy-efficient wireline transceivers. (Doctoral Dissertation). University of Illinois – Urbana-Champaign. Retrieved from http://hdl.handle.net/2142/95549

Chicago Manual of Style (16^th Edition):

Shu, Guanghua. “Energy-efficient wireline transceivers.” 2016. Doctoral Dissertation, University of Illinois – Urbana-Champaign. Accessed January 22, 2021. http://hdl.handle.net/2142/95549.

MLA Handbook (7^th Edition):

Shu, Guanghua. “Energy-efficient wireline transceivers.” 2016. Web. 22 Jan 2021.

Vancouver:

Shu G. Energy-efficient wireline transceivers. [Internet] [Doctoral dissertation]. University of Illinois – Urbana-Champaign; 2016. [cited 2021 Jan 22]. Available from: http://hdl.handle.net/2142/95549.

Council of Science Editors:

Shu G. Energy-efficient wireline transceivers. [Doctoral Dissertation]. University of Illinois – Urbana-Champaign; 2016. Available from: http://hdl.handle.net/2142/95549

Brno University of Technology

15. Feilhauer, Petr. Modul reléových výstupů elektronického tachografu: Relay output module for electronic tachograph.

Degree: 2018, Brno University of Technology

URL: http://hdl.handle.net/11012/14922

► This bachelor thesis contains detailed description of function and wiring current Electronic tachograph RE1xx from company UniControls-Tramex. For comparison there is mentioned description of competitor’s… (more)

Subjects/Keywords: Adresovací multiplexor; Antiparalelní ochranná dioda; ATmega64; Drážní vozidlo; Elektromagnetické relé; Elektronický rychloměr; EMC; Filtrovací kondenzátory; Galvanické oddělení; Hardwarový watchdog; ISP (SPI); Jednotka elektroniky; JTAG; Klidový stav linky; Klopný obvod typu D; Komunikační a indikační jednotka; Koncepce vývoje; Mikrokontroler; Modul reléových výstupů; Ochranný transil; Ovládací cívka; Polovodičové relé; Přepínací kanál; Pull-up rezistor; Reléový výstup; Řídicí obvod; RS485; Rychlostní radar Sériová datová komunikace; Spínací kanál; Sériové programování; Testovací software; Addressing multiplexer; Anti-parallel protective diode; ATmega64; Communication and indicative unit; Conception of development; Control circuit; Control coil; D-type flip-flop; Electromagnetic relay; Electronic tachograph; EMC; Filtering capacitors; Galvanic separation; Hardware watchdog; ISP (SPI); JTAG; Microcontroller; Module of relay outputs; Protective transil; Pull-up resistors; Relay output; Release condition of line; RS485; Serial data communication; Serial programming; Solid state relay; Speed radar; Switch-over channel; Switching channel; Unit of electronics; Testing software; Train vehicle

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Feilhauer, P. (2018). Modul reléových výstupů elektronického tachografu: Relay output module for electronic tachograph. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/14922

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Feilhauer, Petr. “Modul reléových výstupů elektronického tachografu: Relay output module for electronic tachograph.” 2018. Thesis, Brno University of Technology. Accessed January 22, 2021. http://hdl.handle.net/11012/14922.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Feilhauer, Petr. “Modul reléových výstupů elektronického tachografu: Relay output module for electronic tachograph.” 2018. Web. 22 Jan 2021.

Vancouver:

Feilhauer P. Modul reléových výstupů elektronického tachografu: Relay output module for electronic tachograph. [Internet] [Thesis]. Brno University of Technology; 2018. [cited 2021 Jan 22]. Available from: http://hdl.handle.net/11012/14922.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Feilhauer P. Modul reléových výstupů elektronického tachografu: Relay output module for electronic tachograph. [Thesis]. Brno University of Technology; 2018. Available from: http://hdl.handle.net/11012/14922

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

		in
And / Or
		in
And / Or
		in
And / Or
		in

Open Access Theses and Dissertations