Advanced search options

Advanced Search Options 🞨

Browse by author name (“Author name starts with…”).

Find ETDs with:

in
/  
in
/  
in
/  
in

Written in Published in Earliest date Latest date

Sorted by

Results per page:

Sorted by: relevance · author · university · dateNew search

You searched for subject:(Resin transfer molding). Showing records 1 – 29 of 29 total matches.

Search Limiters

Last 2 Years | English Only

Country

▼ Search Limiters


University of Victoria

1. Keulen, Casey James. Process and structural health monitoring of composite structures with embedded fiber optic sensors and piezoelectric transducers.

Degree: Dept. of Mechanical Engineering, 2012, University of Victoria

 Advanced composite materials are becoming increasingly more valuable in a plethora of engineering applications due to properties such as tailorability, low specific strength and stiffness… (more)

Subjects/Keywords: composite materials; structural health monitoring; fiber bragg grating; resin transfer molding

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Keulen, C. J. (2012). Process and structural health monitoring of composite structures with embedded fiber optic sensors and piezoelectric transducers. (Thesis). University of Victoria. Retrieved from http://hdl.handle.net/1828/4170

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16th Edition):

Keulen, Casey James. “Process and structural health monitoring of composite structures with embedded fiber optic sensors and piezoelectric transducers.” 2012. Thesis, University of Victoria. Accessed April 20, 2021. http://hdl.handle.net/1828/4170.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7th Edition):

Keulen, Casey James. “Process and structural health monitoring of composite structures with embedded fiber optic sensors and piezoelectric transducers.” 2012. Web. 20 Apr 2021.

Vancouver:

Keulen CJ. Process and structural health monitoring of composite structures with embedded fiber optic sensors and piezoelectric transducers. [Internet] [Thesis]. University of Victoria; 2012. [cited 2021 Apr 20]. Available from: http://hdl.handle.net/1828/4170.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Keulen CJ. Process and structural health monitoring of composite structures with embedded fiber optic sensors and piezoelectric transducers. [Thesis]. University of Victoria; 2012. Available from: http://hdl.handle.net/1828/4170

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

2. Agogué, Romain. Analyse expérimentale et numérique de la fabrication de pièces composites par le procédé RTM : Experimental and numerical study of the manufacturing of composite parts using the RTM process.

Degree: Docteur es, Génie mécanique, 2011, Université d'Orléans

Cette thèse s’intéresse à la fabrication de pièces composites par le procédé Resin Transfert Molding (ou RTM), appliquée à des tubes de protection thermiques. Plus… (more)

Subjects/Keywords: Tubes de protection thermiques; Procédé resin transfert molding; Couplage hydromécanique; Thick tubular part; Resin transfer molding process; Hydro-mechanical coupling

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Agogué, R. (2011). Analyse expérimentale et numérique de la fabrication de pièces composites par le procédé RTM : Experimental and numerical study of the manufacturing of composite parts using the RTM process. (Doctoral Dissertation). Université d'Orléans. Retrieved from http://www.theses.fr/2011ORLE2006

Chicago Manual of Style (16th Edition):

Agogué, Romain. “Analyse expérimentale et numérique de la fabrication de pièces composites par le procédé RTM : Experimental and numerical study of the manufacturing of composite parts using the RTM process.” 2011. Doctoral Dissertation, Université d'Orléans. Accessed April 20, 2021. http://www.theses.fr/2011ORLE2006.

MLA Handbook (7th Edition):

Agogué, Romain. “Analyse expérimentale et numérique de la fabrication de pièces composites par le procédé RTM : Experimental and numerical study of the manufacturing of composite parts using the RTM process.” 2011. Web. 20 Apr 2021.

Vancouver:

Agogué R. Analyse expérimentale et numérique de la fabrication de pièces composites par le procédé RTM : Experimental and numerical study of the manufacturing of composite parts using the RTM process. [Internet] [Doctoral dissertation]. Université d'Orléans; 2011. [cited 2021 Apr 20]. Available from: http://www.theses.fr/2011ORLE2006.

Council of Science Editors:

Agogué R. Analyse expérimentale et numérique de la fabrication de pièces composites par le procédé RTM : Experimental and numerical study of the manufacturing of composite parts using the RTM process. [Doctoral Dissertation]. Université d'Orléans; 2011. Available from: http://www.theses.fr/2011ORLE2006

3. Aaboud, Bouchra. Modélisation et simulation de la formation, la compression et le transport des bulles d'air en milieux fibreux à double échelle de pores : application au procédé RTM : Modeling and simulation of creation, compression, and transport of air bubbles within a fibrous media in dual scale of pores : application to the RTM process.

Degree: Docteur es, Matériaux composites, 2016, Le Havre

Ce travail traite la problématique des bulles d’air contenues dans les pièces composites mises en œuvre par le procédé RTM. La modélisation des phénomènes de… (more)

Subjects/Keywords: Resin Transfer Molding (RTM); Bulles d'air; Phénomène de création; Transport de bulles; Resin Transfer Molding (RTM); Air bubbles; Compression; Creation; Bubbles transport

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Aaboud, B. (2016). Modélisation et simulation de la formation, la compression et le transport des bulles d'air en milieux fibreux à double échelle de pores : application au procédé RTM : Modeling and simulation of creation, compression, and transport of air bubbles within a fibrous media in dual scale of pores : application to the RTM process. (Doctoral Dissertation). Le Havre. Retrieved from http://www.theses.fr/2016LEHA0023

Chicago Manual of Style (16th Edition):

Aaboud, Bouchra. “Modélisation et simulation de la formation, la compression et le transport des bulles d'air en milieux fibreux à double échelle de pores : application au procédé RTM : Modeling and simulation of creation, compression, and transport of air bubbles within a fibrous media in dual scale of pores : application to the RTM process.” 2016. Doctoral Dissertation, Le Havre. Accessed April 20, 2021. http://www.theses.fr/2016LEHA0023.

MLA Handbook (7th Edition):

Aaboud, Bouchra. “Modélisation et simulation de la formation, la compression et le transport des bulles d'air en milieux fibreux à double échelle de pores : application au procédé RTM : Modeling and simulation of creation, compression, and transport of air bubbles within a fibrous media in dual scale of pores : application to the RTM process.” 2016. Web. 20 Apr 2021.

Vancouver:

Aaboud B. Modélisation et simulation de la formation, la compression et le transport des bulles d'air en milieux fibreux à double échelle de pores : application au procédé RTM : Modeling and simulation of creation, compression, and transport of air bubbles within a fibrous media in dual scale of pores : application to the RTM process. [Internet] [Doctoral dissertation]. Le Havre; 2016. [cited 2021 Apr 20]. Available from: http://www.theses.fr/2016LEHA0023.

Council of Science Editors:

Aaboud B. Modélisation et simulation de la formation, la compression et le transport des bulles d'air en milieux fibreux à double échelle de pores : application au procédé RTM : Modeling and simulation of creation, compression, and transport of air bubbles within a fibrous media in dual scale of pores : application to the RTM process. [Doctoral Dissertation]. Le Havre; 2016. Available from: http://www.theses.fr/2016LEHA0023


Université de Bordeaux I

4. Mouton, Serge. Intégration des contraintes d’industrialisation des pièces en matériaux composites pour l’aide à la décision en conception préliminaire appliquée au procédé RTM : Transmission and appropriation of language in a postcolonial context : the case of Haïti.

Degree: Docteur es, Mécanique, 2010, Université de Bordeaux I

 L’intégration des contraintes d’industrialisation, des pièces en matériaux composites, en conception préliminaire, est un enjeu majeur de la compétitivité des entreprises, et s’inscrit dans une… (more)

Subjects/Keywords: Conception préliminaire; Simulations éléments finis; Optimisation; Assemblage; Matériaux composites; Resin transfer molding; Preliminary design; Resin transfer molding; Finite element simulations; Optimization; Composite materials; Assembly; Design for manufacturing

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Mouton, S. (2010). Intégration des contraintes d’industrialisation des pièces en matériaux composites pour l’aide à la décision en conception préliminaire appliquée au procédé RTM : Transmission and appropriation of language in a postcolonial context : the case of Haïti. (Doctoral Dissertation). Université de Bordeaux I. Retrieved from http://www.theses.fr/2010BOR14029

Chicago Manual of Style (16th Edition):

Mouton, Serge. “Intégration des contraintes d’industrialisation des pièces en matériaux composites pour l’aide à la décision en conception préliminaire appliquée au procédé RTM : Transmission and appropriation of language in a postcolonial context : the case of Haïti.” 2010. Doctoral Dissertation, Université de Bordeaux I. Accessed April 20, 2021. http://www.theses.fr/2010BOR14029.

MLA Handbook (7th Edition):

Mouton, Serge. “Intégration des contraintes d’industrialisation des pièces en matériaux composites pour l’aide à la décision en conception préliminaire appliquée au procédé RTM : Transmission and appropriation of language in a postcolonial context : the case of Haïti.” 2010. Web. 20 Apr 2021.

Vancouver:

Mouton S. Intégration des contraintes d’industrialisation des pièces en matériaux composites pour l’aide à la décision en conception préliminaire appliquée au procédé RTM : Transmission and appropriation of language in a postcolonial context : the case of Haïti. [Internet] [Doctoral dissertation]. Université de Bordeaux I; 2010. [cited 2021 Apr 20]. Available from: http://www.theses.fr/2010BOR14029.

Council of Science Editors:

Mouton S. Intégration des contraintes d’industrialisation des pièces en matériaux composites pour l’aide à la décision en conception préliminaire appliquée au procédé RTM : Transmission and appropriation of language in a postcolonial context : the case of Haïti. [Doctoral Dissertation]. Université de Bordeaux I; 2010. Available from: http://www.theses.fr/2010BOR14029

5. Waris, Marc. Mise en œuvre, instrumentation, validation et modélisation d’un système d’injection RTM pour la fabrication de structures composites de hautes performances : Implementation, instrumentation, validation and modeling of RTM injection system for the manufacturing of structural high performances composites.

Degree: Docteur es, Mécanique et Ingénierie, 2012, Saint-Etienne, EMSE

Les matériaux composites ont connu ces dernières années une forte croissance, croissance aujourd'hui renforcée par les nouvelles normes européenne visant à diminuer les émissions CO2… (more)

Subjects/Keywords: Procédé d'élaboration composites; Suivi des procédés; Capteur à fibre optique (OFS); Resin Transfer Molding (RTM); Moule composite; Composites materials manufacturing; Monitoring process; Optical fiber sensor; Resin transfert molding; Composite mold

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Waris, M. (2012). Mise en œuvre, instrumentation, validation et modélisation d’un système d’injection RTM pour la fabrication de structures composites de hautes performances : Implementation, instrumentation, validation and modeling of RTM injection system for the manufacturing of structural high performances composites. (Doctoral Dissertation). Saint-Etienne, EMSE. Retrieved from http://www.theses.fr/2012EMSE0661

Chicago Manual of Style (16th Edition):

Waris, Marc. “Mise en œuvre, instrumentation, validation et modélisation d’un système d’injection RTM pour la fabrication de structures composites de hautes performances : Implementation, instrumentation, validation and modeling of RTM injection system for the manufacturing of structural high performances composites.” 2012. Doctoral Dissertation, Saint-Etienne, EMSE. Accessed April 20, 2021. http://www.theses.fr/2012EMSE0661.

MLA Handbook (7th Edition):

Waris, Marc. “Mise en œuvre, instrumentation, validation et modélisation d’un système d’injection RTM pour la fabrication de structures composites de hautes performances : Implementation, instrumentation, validation and modeling of RTM injection system for the manufacturing of structural high performances composites.” 2012. Web. 20 Apr 2021.

Vancouver:

Waris M. Mise en œuvre, instrumentation, validation et modélisation d’un système d’injection RTM pour la fabrication de structures composites de hautes performances : Implementation, instrumentation, validation and modeling of RTM injection system for the manufacturing of structural high performances composites. [Internet] [Doctoral dissertation]. Saint-Etienne, EMSE; 2012. [cited 2021 Apr 20]. Available from: http://www.theses.fr/2012EMSE0661.

Council of Science Editors:

Waris M. Mise en œuvre, instrumentation, validation et modélisation d’un système d’injection RTM pour la fabrication de structures composites de hautes performances : Implementation, instrumentation, validation and modeling of RTM injection system for the manufacturing of structural high performances composites. [Doctoral Dissertation]. Saint-Etienne, EMSE; 2012. Available from: http://www.theses.fr/2012EMSE0661


Missouri University of Science and Technology

6. Menta, V. G. K. Advanced composites using non-autoclave processes: manufacturing and characterization.

Degree: PhD, Mechanical Engineering, Missouri University of Science and Technology

 "The objective of the present study is to develop non-autoclave processes to manufacture high performance composites for aerospace applications. In Paper 1, vacuum assisted resin(more)

Subjects/Keywords: Vacuum assisted resin transfer molding (VARTM); Mechanical Engineering

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Menta, V. G. K. (n.d.). Advanced composites using non-autoclave processes: manufacturing and characterization. (Doctoral Dissertation). Missouri University of Science and Technology. Retrieved from https://scholarsmine.mst.edu/doctoral_dissertations/2068

Note: this citation may be lacking information needed for this citation format:
No year of publication.

Chicago Manual of Style (16th Edition):

Menta, V G K. “Advanced composites using non-autoclave processes: manufacturing and characterization.” Doctoral Dissertation, Missouri University of Science and Technology. Accessed April 20, 2021. https://scholarsmine.mst.edu/doctoral_dissertations/2068.

Note: this citation may be lacking information needed for this citation format:
No year of publication.

MLA Handbook (7th Edition):

Menta, V G K. “Advanced composites using non-autoclave processes: manufacturing and characterization.” Web. 20 Apr 2021.

Note: this citation may be lacking information needed for this citation format:
No year of publication.

Vancouver:

Menta VGK. Advanced composites using non-autoclave processes: manufacturing and characterization. [Internet] [Doctoral dissertation]. Missouri University of Science and Technology; [cited 2021 Apr 20]. Available from: https://scholarsmine.mst.edu/doctoral_dissertations/2068.

Note: this citation may be lacking information needed for this citation format:
No year of publication.

Council of Science Editors:

Menta VGK. Advanced composites using non-autoclave processes: manufacturing and characterization. [Doctoral Dissertation]. Missouri University of Science and Technology; Available from: https://scholarsmine.mst.edu/doctoral_dissertations/2068

Note: this citation may be lacking information needed for this citation format:
No year of publication.

7. Cazaux, Guillaume. Faisabilité des procédés LCM pour l'élaboration de composites renfort continu à matrice thermoplastique polyamide : Feasability of LCM processes in the elaboration of continuous fiber-reinforced composite with a thermoplastic polyamid matrix.

Degree: Docteur es, Matériaux, 2016, Le Havre

ALes travaux présentés sont une contribution à l’élaboration de composites à matrices thermoplastiques (TP) par un procédé de type Liquid Composite Molding non réactif pour… (more)

Subjects/Keywords: Resin Transfer Molding (RTM); Liquid Composite Molding (LCM); Thermoplastic composites; RTM-TP process; Double-scale porosity approach; High-fluidity polyamids; Wettability pressure; Permeability

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Cazaux, G. (2016). Faisabilité des procédés LCM pour l'élaboration de composites renfort continu à matrice thermoplastique polyamide : Feasability of LCM processes in the elaboration of continuous fiber-reinforced composite with a thermoplastic polyamid matrix. (Doctoral Dissertation). Le Havre. Retrieved from http://www.theses.fr/2016LEHA0010

Chicago Manual of Style (16th Edition):

Cazaux, Guillaume. “Faisabilité des procédés LCM pour l'élaboration de composites renfort continu à matrice thermoplastique polyamide : Feasability of LCM processes in the elaboration of continuous fiber-reinforced composite with a thermoplastic polyamid matrix.” 2016. Doctoral Dissertation, Le Havre. Accessed April 20, 2021. http://www.theses.fr/2016LEHA0010.

MLA Handbook (7th Edition):

Cazaux, Guillaume. “Faisabilité des procédés LCM pour l'élaboration de composites renfort continu à matrice thermoplastique polyamide : Feasability of LCM processes in the elaboration of continuous fiber-reinforced composite with a thermoplastic polyamid matrix.” 2016. Web. 20 Apr 2021.

Vancouver:

Cazaux G. Faisabilité des procédés LCM pour l'élaboration de composites renfort continu à matrice thermoplastique polyamide : Feasability of LCM processes in the elaboration of continuous fiber-reinforced composite with a thermoplastic polyamid matrix. [Internet] [Doctoral dissertation]. Le Havre; 2016. [cited 2021 Apr 20]. Available from: http://www.theses.fr/2016LEHA0010.

Council of Science Editors:

Cazaux G. Faisabilité des procédés LCM pour l'élaboration de composites renfort continu à matrice thermoplastique polyamide : Feasability of LCM processes in the elaboration of continuous fiber-reinforced composite with a thermoplastic polyamid matrix. [Doctoral Dissertation]. Le Havre; 2016. Available from: http://www.theses.fr/2016LEHA0010


Brigham Young University

8. Warner, Wyatt Young. Characterization of Local Void Content in Carbon Fiber Reinforced Plastic Parts Utilizing Observation of In Situ Fluorescent Dye Within Epoxy.

Degree: MS, 2019, Brigham Young University

  Experimentation exploring the movement of voids within carbon fiber reinforced plastics was performed using fluorescent dye infused into the laminates observed through a transparent… (more)

Subjects/Keywords: composite; resin transfer molding; infusion; in situ photography; void detection; non-destructive testing; carbon fiber reinforced plastics; liquid compression molding; interlaminar shear strength

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Warner, W. Y. (2019). Characterization of Local Void Content in Carbon Fiber Reinforced Plastic Parts Utilizing Observation of In Situ Fluorescent Dye Within Epoxy. (Masters Thesis). Brigham Young University. Retrieved from https://scholarsarchive.byu.edu/cgi/viewcontent.cgi?article=8772&context=etd

Chicago Manual of Style (16th Edition):

Warner, Wyatt Young. “Characterization of Local Void Content in Carbon Fiber Reinforced Plastic Parts Utilizing Observation of In Situ Fluorescent Dye Within Epoxy.” 2019. Masters Thesis, Brigham Young University. Accessed April 20, 2021. https://scholarsarchive.byu.edu/cgi/viewcontent.cgi?article=8772&context=etd.

MLA Handbook (7th Edition):

Warner, Wyatt Young. “Characterization of Local Void Content in Carbon Fiber Reinforced Plastic Parts Utilizing Observation of In Situ Fluorescent Dye Within Epoxy.” 2019. Web. 20 Apr 2021.

Vancouver:

Warner WY. Characterization of Local Void Content in Carbon Fiber Reinforced Plastic Parts Utilizing Observation of In Situ Fluorescent Dye Within Epoxy. [Internet] [Masters thesis]. Brigham Young University; 2019. [cited 2021 Apr 20]. Available from: https://scholarsarchive.byu.edu/cgi/viewcontent.cgi?article=8772&context=etd.

Council of Science Editors:

Warner WY. Characterization of Local Void Content in Carbon Fiber Reinforced Plastic Parts Utilizing Observation of In Situ Fluorescent Dye Within Epoxy. [Masters Thesis]. Brigham Young University; 2019. Available from: https://scholarsarchive.byu.edu/cgi/viewcontent.cgi?article=8772&context=etd

9. Zemni, Lilia. Étude de la mise en oeuvre de composites thermostables cyanate-ester pour pièces structurales aéronautiques tièdes : Study of thermostable cyanate-ester composite for warm aircraft structural parts.

Degree: Docteur es, Génie mécanique, mécanique des matériaux, 2019, Ecole nationale des Mines d'Albi-Carmaux

Les pièces situées dans des zones chaudes/tièdes (300-400°C) de l'avion sont actuellement en titane (mât moteur) ou en composite à matrice époxy (plenum). Comment pourrait-on… (more)

Subjects/Keywords: Matrice thermostable; Cyanates ester (CEs); RTM (Resin Transfer Molding); Modélisation de la cinétique de réaction; Propriétés thermiques FC/CE; Thermostable matrix; Cyanates esters (CEs); RTM (Resin Transfer Molding); Cure kinetics modelling; Thermal properties of the composite (FC/CE); 620.19

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Zemni, L. (2019). Étude de la mise en oeuvre de composites thermostables cyanate-ester pour pièces structurales aéronautiques tièdes : Study of thermostable cyanate-ester composite for warm aircraft structural parts. (Doctoral Dissertation). Ecole nationale des Mines d'Albi-Carmaux. Retrieved from http://www.theses.fr/2019EMAC0004

Chicago Manual of Style (16th Edition):

Zemni, Lilia. “Étude de la mise en oeuvre de composites thermostables cyanate-ester pour pièces structurales aéronautiques tièdes : Study of thermostable cyanate-ester composite for warm aircraft structural parts.” 2019. Doctoral Dissertation, Ecole nationale des Mines d'Albi-Carmaux. Accessed April 20, 2021. http://www.theses.fr/2019EMAC0004.

MLA Handbook (7th Edition):

Zemni, Lilia. “Étude de la mise en oeuvre de composites thermostables cyanate-ester pour pièces structurales aéronautiques tièdes : Study of thermostable cyanate-ester composite for warm aircraft structural parts.” 2019. Web. 20 Apr 2021.

Vancouver:

Zemni L. Étude de la mise en oeuvre de composites thermostables cyanate-ester pour pièces structurales aéronautiques tièdes : Study of thermostable cyanate-ester composite for warm aircraft structural parts. [Internet] [Doctoral dissertation]. Ecole nationale des Mines d'Albi-Carmaux; 2019. [cited 2021 Apr 20]. Available from: http://www.theses.fr/2019EMAC0004.

Council of Science Editors:

Zemni L. Étude de la mise en oeuvre de composites thermostables cyanate-ester pour pièces structurales aéronautiques tièdes : Study of thermostable cyanate-ester composite for warm aircraft structural parts. [Doctoral Dissertation]. Ecole nationale des Mines d'Albi-Carmaux; 2019. Available from: http://www.theses.fr/2019EMAC0004


The Ohio State University

10. Xu, Liqun. Integrated analysis of liquid composite molding (LCM) processes.

Degree: PhD, Chemical Engineering, 2004, The Ohio State University

 Liquid composite molding (LCM) processes have been proven to be cost effective for producing lightweight and high-performance composites. In this study, an integrated analysis was… (more)

Subjects/Keywords: Engineering, Chemical; liquid composite molding; resin injection pultrusion; vacuum assisted resin transfer molding; vinyl ester resin; unsaturated polyester resin; low profile additive.

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Xu, L. (2004). Integrated analysis of liquid composite molding (LCM) processes. (Doctoral Dissertation). The Ohio State University. Retrieved from http://rave.ohiolink.edu/etdc/view?acc_num=osu1095688597

Chicago Manual of Style (16th Edition):

Xu, Liqun. “Integrated analysis of liquid composite molding (LCM) processes.” 2004. Doctoral Dissertation, The Ohio State University. Accessed April 20, 2021. http://rave.ohiolink.edu/etdc/view?acc_num=osu1095688597.

MLA Handbook (7th Edition):

Xu, Liqun. “Integrated analysis of liquid composite molding (LCM) processes.” 2004. Web. 20 Apr 2021.

Vancouver:

Xu L. Integrated analysis of liquid composite molding (LCM) processes. [Internet] [Doctoral dissertation]. The Ohio State University; 2004. [cited 2021 Apr 20]. Available from: http://rave.ohiolink.edu/etdc/view?acc_num=osu1095688597.

Council of Science Editors:

Xu L. Integrated analysis of liquid composite molding (LCM) processes. [Doctoral Dissertation]. The Ohio State University; 2004. Available from: http://rave.ohiolink.edu/etdc/view?acc_num=osu1095688597

11. Wendling, Audrey. Simulation à l'échelle mésoscopique de la mise en forme de renforts de composites tissés : Mesoscopic simulation of weaving composite reinforcements forming.

Degree: Docteur es, Mécanique, 2013, INSA Lyon

De nos jours, l’intégration de pièces composites dans les produits intéresse de plus en plus les industriels, particulièrement dans le domaine des transports. En effet,… (more)

Subjects/Keywords: Mécanique appliquée; Conception; Pièces mécaniques; Rtm; Resin transfert molding; Préformage; Renforts tissés; Mise en forme; Imprimante 3 D; Modélisation 3 D; Modélisation mésoscopique; Simulation; Woven reinforcement; Composites; Forming; Mesoscopic approach; Simulation; RTM - Resin transfer molding; RTM process; 3D printing; 621.807 2

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Wendling, A. (2013). Simulation à l'échelle mésoscopique de la mise en forme de renforts de composites tissés : Mesoscopic simulation of weaving composite reinforcements forming. (Doctoral Dissertation). INSA Lyon. Retrieved from http://www.theses.fr/2013ISAL0079

Chicago Manual of Style (16th Edition):

Wendling, Audrey. “Simulation à l'échelle mésoscopique de la mise en forme de renforts de composites tissés : Mesoscopic simulation of weaving composite reinforcements forming.” 2013. Doctoral Dissertation, INSA Lyon. Accessed April 20, 2021. http://www.theses.fr/2013ISAL0079.

MLA Handbook (7th Edition):

Wendling, Audrey. “Simulation à l'échelle mésoscopique de la mise en forme de renforts de composites tissés : Mesoscopic simulation of weaving composite reinforcements forming.” 2013. Web. 20 Apr 2021.

Vancouver:

Wendling A. Simulation à l'échelle mésoscopique de la mise en forme de renforts de composites tissés : Mesoscopic simulation of weaving composite reinforcements forming. [Internet] [Doctoral dissertation]. INSA Lyon; 2013. [cited 2021 Apr 20]. Available from: http://www.theses.fr/2013ISAL0079.

Council of Science Editors:

Wendling A. Simulation à l'échelle mésoscopique de la mise en forme de renforts de composites tissés : Mesoscopic simulation of weaving composite reinforcements forming. [Doctoral Dissertation]. INSA Lyon; 2013. Available from: http://www.theses.fr/2013ISAL0079


University of Michigan

12. Peterson, Richard Curwood. Effect of fiber preform architecture on wetting at low Reynolds numbers during resin transfer molding.

Degree: PhD, Materials science, 1996, University of Michigan

 The effect of fiber roving dimensions, geometry, and distribution on capillary pressure, void formation and elimination, and permeability on the imbibtion of resin was studied.… (more)

Subjects/Keywords: Architecture; Effect; Fiber; Low; Molding; Numbers; Preform; Resin; Reynolds; Transfer; Wetting

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Peterson, R. C. (1996). Effect of fiber preform architecture on wetting at low Reynolds numbers during resin transfer molding. (Doctoral Dissertation). University of Michigan. Retrieved from http://hdl.handle.net/2027.42/129807

Chicago Manual of Style (16th Edition):

Peterson, Richard Curwood. “Effect of fiber preform architecture on wetting at low Reynolds numbers during resin transfer molding.” 1996. Doctoral Dissertation, University of Michigan. Accessed April 20, 2021. http://hdl.handle.net/2027.42/129807.

MLA Handbook (7th Edition):

Peterson, Richard Curwood. “Effect of fiber preform architecture on wetting at low Reynolds numbers during resin transfer molding.” 1996. Web. 20 Apr 2021.

Vancouver:

Peterson RC. Effect of fiber preform architecture on wetting at low Reynolds numbers during resin transfer molding. [Internet] [Doctoral dissertation]. University of Michigan; 1996. [cited 2021 Apr 20]. Available from: http://hdl.handle.net/2027.42/129807.

Council of Science Editors:

Peterson RC. Effect of fiber preform architecture on wetting at low Reynolds numbers during resin transfer molding. [Doctoral Dissertation]. University of Michigan; 1996. Available from: http://hdl.handle.net/2027.42/129807


Vilnius Gediminas Technical University

13. Gailiūnas, Paulius. Fotovoltinio modulio su koncentratoriumi projektavimas ir tyrimas.

Degree: Master, Physics, 2013, Vilnius Gediminas Technical University

Baigiamajame magistro darbe suprojektuotos ir pagamintos dviejų rūšių šviesos koncentratorinės sistemos: jungtinė parabolinė ir sistema su Frenelio lęšiu. Atlikta saulės elementų efektyvumo analizė, išnagrinėtos šviesą… (more)

Subjects/Keywords: Frenelio lęšis; Jungtinis parabolinis konentratorius; Lūžio rodiklis; Optinis pralaidumas; Vakuuminis plastiko formavimas; Fresnel lens; Compound parabolic concentrator; Refractive index; Optical transmittance; Resin transfer molding

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Gailiūnas, Paulius. (2013). Fotovoltinio modulio su koncentratoriumi projektavimas ir tyrimas. (Masters Thesis). Vilnius Gediminas Technical University. Retrieved from http://vddb.laba.lt/obj/LT-eLABa-0001:E.02~2013~D_20130617_184708-47299 ;

Note: this citation may be lacking information needed for this citation format:
Author name may be incomplete

Chicago Manual of Style (16th Edition):

Gailiūnas, Paulius. “Fotovoltinio modulio su koncentratoriumi projektavimas ir tyrimas.” 2013. Masters Thesis, Vilnius Gediminas Technical University. Accessed April 20, 2021. http://vddb.laba.lt/obj/LT-eLABa-0001:E.02~2013~D_20130617_184708-47299 ;.

Note: this citation may be lacking information needed for this citation format:
Author name may be incomplete

MLA Handbook (7th Edition):

Gailiūnas, Paulius. “Fotovoltinio modulio su koncentratoriumi projektavimas ir tyrimas.” 2013. Web. 20 Apr 2021.

Note: this citation may be lacking information needed for this citation format:
Author name may be incomplete

Vancouver:

Gailiūnas, Paulius. Fotovoltinio modulio su koncentratoriumi projektavimas ir tyrimas. [Internet] [Masters thesis]. Vilnius Gediminas Technical University; 2013. [cited 2021 Apr 20]. Available from: http://vddb.laba.lt/obj/LT-eLABa-0001:E.02~2013~D_20130617_184708-47299 ;.

Note: this citation may be lacking information needed for this citation format:
Author name may be incomplete

Council of Science Editors:

Gailiūnas, Paulius. Fotovoltinio modulio su koncentratoriumi projektavimas ir tyrimas. [Masters Thesis]. Vilnius Gediminas Technical University; 2013. Available from: http://vddb.laba.lt/obj/LT-eLABa-0001:E.02~2013~D_20130617_184708-47299 ;

Note: this citation may be lacking information needed for this citation format:
Author name may be incomplete

14. Ghodhbani, Nacef. Contrôle et suivi des propriétés visco-élastiques d'un composite en cours de fabrication : Control and monitoring of viscoelastic properties of a composite during manufacturing.

Degree: Docteur es, Acoustique, 2016, Le Havre

Les transducteurs ultrasonores font l'objet de nombreux développements en contrôle non-destructif (CND) industriel. Utilisé ponctuellement et périodiquement, le CND ultrasonore permet d'établir des diagnostics sur… (more)

Subjects/Keywords: Contrôle non destructif; Evaluation non destructive; Réponse électroacoustique; Procédé RTM; Modélisation DSM; Ultrasounds; Non-destructive testing (NDT); Debye Series Method; Resin Transfer Molding (RTM); Viscoelasticity; Composites; Electroacoustic response

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Ghodhbani, N. (2016). Contrôle et suivi des propriétés visco-élastiques d'un composite en cours de fabrication : Control and monitoring of viscoelastic properties of a composite during manufacturing. (Doctoral Dissertation). Le Havre. Retrieved from http://www.theses.fr/2016LEHA0008

Chicago Manual of Style (16th Edition):

Ghodhbani, Nacef. “Contrôle et suivi des propriétés visco-élastiques d'un composite en cours de fabrication : Control and monitoring of viscoelastic properties of a composite during manufacturing.” 2016. Doctoral Dissertation, Le Havre. Accessed April 20, 2021. http://www.theses.fr/2016LEHA0008.

MLA Handbook (7th Edition):

Ghodhbani, Nacef. “Contrôle et suivi des propriétés visco-élastiques d'un composite en cours de fabrication : Control and monitoring of viscoelastic properties of a composite during manufacturing.” 2016. Web. 20 Apr 2021.

Vancouver:

Ghodhbani N. Contrôle et suivi des propriétés visco-élastiques d'un composite en cours de fabrication : Control and monitoring of viscoelastic properties of a composite during manufacturing. [Internet] [Doctoral dissertation]. Le Havre; 2016. [cited 2021 Apr 20]. Available from: http://www.theses.fr/2016LEHA0008.

Council of Science Editors:

Ghodhbani N. Contrôle et suivi des propriétés visco-élastiques d'un composite en cours de fabrication : Control and monitoring of viscoelastic properties of a composite during manufacturing. [Doctoral Dissertation]. Le Havre; 2016. Available from: http://www.theses.fr/2016LEHA0008


Baylor University

15. Mailen, Russell. Investigation of induced thermo-mechanical response and cure kinetics during processing of carbon fiber reinforced plastics.

Degree: MS, Mechanical Engineering., 2013, Baylor University

 The manufacture of laminated composite materials using a thermosetting resin matrix is a complex process that can be understood with a knowledge of cure kinetics,… (more)

Subjects/Keywords: Cure induced strain.; Carbon fiber reinforced plastics (CFRP).; Vacuum assisted resin transfer molding (VARTM).; Axisymmetric finite element analysis (FEA).; Thermosetting polymer cure kinetics.

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Mailen, R. (2013). Investigation of induced thermo-mechanical response and cure kinetics during processing of carbon fiber reinforced plastics. (Masters Thesis). Baylor University. Retrieved from http://hdl.handle.net/2104/8582

Chicago Manual of Style (16th Edition):

Mailen, Russell. “Investigation of induced thermo-mechanical response and cure kinetics during processing of carbon fiber reinforced plastics.” 2013. Masters Thesis, Baylor University. Accessed April 20, 2021. http://hdl.handle.net/2104/8582.

MLA Handbook (7th Edition):

Mailen, Russell. “Investigation of induced thermo-mechanical response and cure kinetics during processing of carbon fiber reinforced plastics.” 2013. Web. 20 Apr 2021.

Vancouver:

Mailen R. Investigation of induced thermo-mechanical response and cure kinetics during processing of carbon fiber reinforced plastics. [Internet] [Masters thesis]. Baylor University; 2013. [cited 2021 Apr 20]. Available from: http://hdl.handle.net/2104/8582.

Council of Science Editors:

Mailen R. Investigation of induced thermo-mechanical response and cure kinetics during processing of carbon fiber reinforced plastics. [Masters Thesis]. Baylor University; 2013. Available from: http://hdl.handle.net/2104/8582


Virginia Tech

16. Sayre, Jay Randall. Vacuum-Assisted Resin Transfer Molding (VARTM) Model Development, Verification, and Process Analysis.

Degree: PhD, Materials Science and Engineering, 2000, Virginia Tech

 Vacuum-Assisted Resin Transfer Molding (VARTM) processes are becoming promising technologies in the manufacturing of primary composite structures in the aircraft industry as well as infrastructure.… (more)

Subjects/Keywords: Vacuum-Assisted Resin Transfer Molding; polymer composite processing; VARTM; polymer composite process modeling

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Sayre, J. R. (2000). Vacuum-Assisted Resin Transfer Molding (VARTM) Model Development, Verification, and Process Analysis. (Doctoral Dissertation). Virginia Tech. Retrieved from http://hdl.handle.net/10919/27034

Chicago Manual of Style (16th Edition):

Sayre, Jay Randall. “Vacuum-Assisted Resin Transfer Molding (VARTM) Model Development, Verification, and Process Analysis.” 2000. Doctoral Dissertation, Virginia Tech. Accessed April 20, 2021. http://hdl.handle.net/10919/27034.

MLA Handbook (7th Edition):

Sayre, Jay Randall. “Vacuum-Assisted Resin Transfer Molding (VARTM) Model Development, Verification, and Process Analysis.” 2000. Web. 20 Apr 2021.

Vancouver:

Sayre JR. Vacuum-Assisted Resin Transfer Molding (VARTM) Model Development, Verification, and Process Analysis. [Internet] [Doctoral dissertation]. Virginia Tech; 2000. [cited 2021 Apr 20]. Available from: http://hdl.handle.net/10919/27034.

Council of Science Editors:

Sayre JR. Vacuum-Assisted Resin Transfer Molding (VARTM) Model Development, Verification, and Process Analysis. [Doctoral Dissertation]. Virginia Tech; 2000. Available from: http://hdl.handle.net/10919/27034


Virginia Tech

17. McGrane, Rebecca Ann. Vacuum Assisted Resin Transfer Molding of Foam Sandwich Composite Materials: Process Development and Model Verification.

Degree: MS, Engineering Science and Mechanics, 2001, Virginia Tech

 Vacuum assisted resin transfer molding (VARTM) is a low cost resin infusion process being developed for the manufacture of composite structures. VARTM is being evaluated… (more)

Subjects/Keywords: vacuum assisted resin transfer molding; polymer composite processing; sandwich structures; VARTM

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

McGrane, R. A. (2001). Vacuum Assisted Resin Transfer Molding of Foam Sandwich Composite Materials: Process Development and Model Verification. (Masters Thesis). Virginia Tech. Retrieved from http://hdl.handle.net/10919/42108

Chicago Manual of Style (16th Edition):

McGrane, Rebecca Ann. “Vacuum Assisted Resin Transfer Molding of Foam Sandwich Composite Materials: Process Development and Model Verification.” 2001. Masters Thesis, Virginia Tech. Accessed April 20, 2021. http://hdl.handle.net/10919/42108.

MLA Handbook (7th Edition):

McGrane, Rebecca Ann. “Vacuum Assisted Resin Transfer Molding of Foam Sandwich Composite Materials: Process Development and Model Verification.” 2001. Web. 20 Apr 2021.

Vancouver:

McGrane RA. Vacuum Assisted Resin Transfer Molding of Foam Sandwich Composite Materials: Process Development and Model Verification. [Internet] [Masters thesis]. Virginia Tech; 2001. [cited 2021 Apr 20]. Available from: http://hdl.handle.net/10919/42108.

Council of Science Editors:

McGrane RA. Vacuum Assisted Resin Transfer Molding of Foam Sandwich Composite Materials: Process Development and Model Verification. [Masters Thesis]. Virginia Tech; 2001. Available from: http://hdl.handle.net/10919/42108

18. MOTA, Carlos Antonio de Araújo. Manufatura de compósito polimérico reforçado com ligas Niti via RTM: modelagem e simulação via CFX.

Degree: 2018, Universidade Federal de Campina Grande; PÓS-GRADUAÇÃO EM ENGENHARIA MECÂNICA; UFCG; Brasil; Centro de Ciências e Tecnologia – CCT

Submitted by Maria Medeiros ([email protected]) on 2019-09-20T12:57:45Z No. of bitstreams: 1 CARLOS ANTONIO DE ARAÚJO MOTA - DISSERTAÇÃO (PPGEM) 2018.pdf: 6037146 bytes, checksum: 8779a4e92e17c40250adae1d9895c2f5 (MD5)… (more)

Subjects/Keywords: Engenharia Mecânica; Compósito; Ligas com Memória de Forma; Fluxo de Resina; Simulação; Ansys CFX; Smart Materials; Polymer Composite; Shape Memory Alloys; Resin Transfer Molding; Numerical Simulation

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

MOTA, C. A. d. A. (2018). Manufatura de compósito polimérico reforçado com ligas Niti via RTM: modelagem e simulação via CFX. (Masters Thesis). Universidade Federal de Campina Grande; PÓS-GRADUAÇÃO EM ENGENHARIA MECÂNICA; UFCG; Brasil; Centro de Ciências e Tecnologia – CCT. Retrieved from http://dspace.sti.ufcg.edu.br:8080/jspui/handle/riufcg/7186

Chicago Manual of Style (16th Edition):

MOTA, Carlos Antonio de Araújo. “Manufatura de compósito polimérico reforçado com ligas Niti via RTM: modelagem e simulação via CFX.” 2018. Masters Thesis, Universidade Federal de Campina Grande; PÓS-GRADUAÇÃO EM ENGENHARIA MECÂNICA; UFCG; Brasil; Centro de Ciências e Tecnologia – CCT. Accessed April 20, 2021. http://dspace.sti.ufcg.edu.br:8080/jspui/handle/riufcg/7186.

MLA Handbook (7th Edition):

MOTA, Carlos Antonio de Araújo. “Manufatura de compósito polimérico reforçado com ligas Niti via RTM: modelagem e simulação via CFX.” 2018. Web. 20 Apr 2021.

Vancouver:

MOTA CAdA. Manufatura de compósito polimérico reforçado com ligas Niti via RTM: modelagem e simulação via CFX. [Internet] [Masters thesis]. Universidade Federal de Campina Grande; PÓS-GRADUAÇÃO EM ENGENHARIA MECÂNICA; UFCG; Brasil; Centro de Ciências e Tecnologia – CCT; 2018. [cited 2021 Apr 20]. Available from: http://dspace.sti.ufcg.edu.br:8080/jspui/handle/riufcg/7186.

Council of Science Editors:

MOTA CAdA. Manufatura de compósito polimérico reforçado com ligas Niti via RTM: modelagem e simulação via CFX. [Masters Thesis]. Universidade Federal de Campina Grande; PÓS-GRADUAÇÃO EM ENGENHARIA MECÂNICA; UFCG; Brasil; Centro de Ciências e Tecnologia – CCT; 2018. Available from: http://dspace.sti.ufcg.edu.br:8080/jspui/handle/riufcg/7186


Virginia Tech

19. Caba, Aaron C. Jr. Verification of a Three-Dimensional Resin Film Infusion Proecss Simulation Model.

Degree: MS, Engineering Science and Mechanics, 1998, Virginia Tech

 This investigation completed the verification of a three-dimensional resin transfer molding/resin film infusion (RTM/RFI) process simulation model. The model incorporates resin flow through an anisotropic… (more)

Subjects/Keywords: resin film infusion; resin transfer molding; composite manufacturing; simulation; modeling; textile preform; flow in porous media; heat transfer

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Caba, A. C. J. (1998). Verification of a Three-Dimensional Resin Film Infusion Proecss Simulation Model. (Masters Thesis). Virginia Tech. Retrieved from http://hdl.handle.net/10919/36572

Chicago Manual of Style (16th Edition):

Caba, Aaron C Jr. “Verification of a Three-Dimensional Resin Film Infusion Proecss Simulation Model.” 1998. Masters Thesis, Virginia Tech. Accessed April 20, 2021. http://hdl.handle.net/10919/36572.

MLA Handbook (7th Edition):

Caba, Aaron C Jr. “Verification of a Three-Dimensional Resin Film Infusion Proecss Simulation Model.” 1998. Web. 20 Apr 2021.

Vancouver:

Caba ACJ. Verification of a Three-Dimensional Resin Film Infusion Proecss Simulation Model. [Internet] [Masters thesis]. Virginia Tech; 1998. [cited 2021 Apr 20]. Available from: http://hdl.handle.net/10919/36572.

Council of Science Editors:

Caba ACJ. Verification of a Three-Dimensional Resin Film Infusion Proecss Simulation Model. [Masters Thesis]. Virginia Tech; 1998. Available from: http://hdl.handle.net/10919/36572


Penn State University

20. Maruszewski, Rance Joel. COMPLEX COMPOSITE TURBO-MACHINERY COMPONENT FABRICATED BY RESIN TRANSFER MOLDING .

Degree: 2011, Penn State University

 This thesis is an overview of the resin transfer molding fabrication of a complex composite turbo-machinery component (blade). The motivation for this work was to… (more)

Subjects/Keywords: Cost Saving Manufacturing Technology; Metrology; Geometric Inspection; Geometry Correction by Finite Element Modeling FEM; Fiber Reinforced Polymer FRP; Resin Transfer Molding RTM; Composite Fabrication; Prototype; Production; Urethane Tooling; Aluminum Tooling; Woven Carbon Fabric; Vinyl Ester Resin

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Maruszewski, R. J. (2011). COMPLEX COMPOSITE TURBO-MACHINERY COMPONENT FABRICATED BY RESIN TRANSFER MOLDING . (Thesis). Penn State University. Retrieved from https://submit-etda.libraries.psu.edu/catalog/11888

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16th Edition):

Maruszewski, Rance Joel. “COMPLEX COMPOSITE TURBO-MACHINERY COMPONENT FABRICATED BY RESIN TRANSFER MOLDING .” 2011. Thesis, Penn State University. Accessed April 20, 2021. https://submit-etda.libraries.psu.edu/catalog/11888.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7th Edition):

Maruszewski, Rance Joel. “COMPLEX COMPOSITE TURBO-MACHINERY COMPONENT FABRICATED BY RESIN TRANSFER MOLDING .” 2011. Web. 20 Apr 2021.

Vancouver:

Maruszewski RJ. COMPLEX COMPOSITE TURBO-MACHINERY COMPONENT FABRICATED BY RESIN TRANSFER MOLDING . [Internet] [Thesis]. Penn State University; 2011. [cited 2021 Apr 20]. Available from: https://submit-etda.libraries.psu.edu/catalog/11888.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Maruszewski RJ. COMPLEX COMPOSITE TURBO-MACHINERY COMPONENT FABRICATED BY RESIN TRANSFER MOLDING . [Thesis]. Penn State University; 2011. Available from: https://submit-etda.libraries.psu.edu/catalog/11888

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

21. Brandley, Mark Wesley. Void Modeling in Resin Infusion.

Degree: MS, 2015, Brigham Young University

Resin infusion of composite parts has continually been reaching to achieve laminate quality equal to, or exceeding, the quality produced with prepreg in an… (more)

Subjects/Keywords: Mark Brandley; resin transfer molding; void formation; process optimization; out-of-autoclave; carbon fiber; vacuum infusion; resin infusion; Industrial Engineering

resin infusion processes, particularly resin transfer molding (RTM). Resin infusion… …conditions on the concentration, location and distribution of voids in a resin transfer molding… …infusion Resin Transfer Molding – (RTM) is a composite molding pressure where over… …released. 20 3.2 3.2.1 Resin Transfer Molding and Laminate Preparation Tooling A mold… …reinforcement that is then infused with resin. In RTM, dry fibers are placed in an enclosed, matched… 

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Brandley, M. W. (2015). Void Modeling in Resin Infusion. (Masters Thesis). Brigham Young University. Retrieved from https://scholarsarchive.byu.edu/cgi/viewcontent.cgi?article=6459&context=etd

Chicago Manual of Style (16th Edition):

Brandley, Mark Wesley. “Void Modeling in Resin Infusion.” 2015. Masters Thesis, Brigham Young University. Accessed April 20, 2021. https://scholarsarchive.byu.edu/cgi/viewcontent.cgi?article=6459&context=etd.

MLA Handbook (7th Edition):

Brandley, Mark Wesley. “Void Modeling in Resin Infusion.” 2015. Web. 20 Apr 2021.

Vancouver:

Brandley MW. Void Modeling in Resin Infusion. [Internet] [Masters thesis]. Brigham Young University; 2015. [cited 2021 Apr 20]. Available from: https://scholarsarchive.byu.edu/cgi/viewcontent.cgi?article=6459&context=etd.

Council of Science Editors:

Brandley MW. Void Modeling in Resin Infusion. [Masters Thesis]. Brigham Young University; 2015. Available from: https://scholarsarchive.byu.edu/cgi/viewcontent.cgi?article=6459&context=etd

22. Turtola, Simon Larsson. Utredning av tillverkningsinducerade avvikelser i fiberförstärkt komposit genom blandningsexperiment : En fallstudie enligt DMAIC vid ABB Composites.

Degree: Technology and Social Sciences, 2020, Luleå University of Technology

Tillämpningen av fiberförstärkt polymerkomposit har senaste decenniet ökat kraftigt inom flertalet högteknologiska branscher. Trots framgången är förekomsten av tillverkningsinducerade avvikelser fortfarande en utmaning. Avvikelserna… (more)

Subjects/Keywords: Mixture design; design of experiments; fibre-reinforced composite; vacuum assisted resin transfer molding (VARTM); Blandningsexperiment; försöksplanering; fiberförstärkt komposit; vakuuminjicering; Composite Science and Engineering; Kompositmaterial och -teknik; Reliability and Maintenance; Tillförlitlighets- och kvalitetsteknik

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Turtola, S. L. (2020). Utredning av tillverkningsinducerade avvikelser i fiberförstärkt komposit genom blandningsexperiment : En fallstudie enligt DMAIC vid ABB Composites. (Thesis). Luleå University of Technology. Retrieved from http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-80031

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16th Edition):

Turtola, Simon Larsson. “Utredning av tillverkningsinducerade avvikelser i fiberförstärkt komposit genom blandningsexperiment : En fallstudie enligt DMAIC vid ABB Composites.” 2020. Thesis, Luleå University of Technology. Accessed April 20, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-80031.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7th Edition):

Turtola, Simon Larsson. “Utredning av tillverkningsinducerade avvikelser i fiberförstärkt komposit genom blandningsexperiment : En fallstudie enligt DMAIC vid ABB Composites.” 2020. Web. 20 Apr 2021.

Vancouver:

Turtola SL. Utredning av tillverkningsinducerade avvikelser i fiberförstärkt komposit genom blandningsexperiment : En fallstudie enligt DMAIC vid ABB Composites. [Internet] [Thesis]. Luleå University of Technology; 2020. [cited 2021 Apr 20]. Available from: http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-80031.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Turtola SL. Utredning av tillverkningsinducerade avvikelser i fiberförstärkt komposit genom blandningsexperiment : En fallstudie enligt DMAIC vid ABB Composites. [Thesis]. Luleå University of Technology; 2020. Available from: http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-80031

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

23. Van den Broek d'Obrenan, Ghislain. Adaptation du procédé RTM (Moulage par Transfert de Résine) à la mise en œuvre de matériaux composites à matrice thermoplastique : The adaptation of the RTM (Resin Transfer Molding) process to manufacture thermoplastic-based composites.

Degree: Docteur es, Matériaux polymère, 2011, INSA Lyon

Le procédé « Resin Transfer Molding » (RTM) est très largement utilisé pour la production industrielle de matériaux composites à matrice thermodurcissable. En effet, de… (more)

Subjects/Keywords: Composite à matrice polymère; Matrice thermoplastique; Moulage par transfert de résine; Polyamide; Polymérisation anionique; Renfort tissé; Polymer matrix composite; Thermoplastic matrix; RTM - Resin transfer molding; Polyamide; Anionic polymerization; Woven reinforcement; 668.416 072

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Van den Broek d'Obrenan, G. (2011). Adaptation du procédé RTM (Moulage par Transfert de Résine) à la mise en œuvre de matériaux composites à matrice thermoplastique : The adaptation of the RTM (Resin Transfer Molding) process to manufacture thermoplastic-based composites. (Doctoral Dissertation). INSA Lyon. Retrieved from http://www.theses.fr/2011ISAL0112

Chicago Manual of Style (16th Edition):

Van den Broek d'Obrenan, Ghislain. “Adaptation du procédé RTM (Moulage par Transfert de Résine) à la mise en œuvre de matériaux composites à matrice thermoplastique : The adaptation of the RTM (Resin Transfer Molding) process to manufacture thermoplastic-based composites.” 2011. Doctoral Dissertation, INSA Lyon. Accessed April 20, 2021. http://www.theses.fr/2011ISAL0112.

MLA Handbook (7th Edition):

Van den Broek d'Obrenan, Ghislain. “Adaptation du procédé RTM (Moulage par Transfert de Résine) à la mise en œuvre de matériaux composites à matrice thermoplastique : The adaptation of the RTM (Resin Transfer Molding) process to manufacture thermoplastic-based composites.” 2011. Web. 20 Apr 2021.

Vancouver:

Van den Broek d'Obrenan G. Adaptation du procédé RTM (Moulage par Transfert de Résine) à la mise en œuvre de matériaux composites à matrice thermoplastique : The adaptation of the RTM (Resin Transfer Molding) process to manufacture thermoplastic-based composites. [Internet] [Doctoral dissertation]. INSA Lyon; 2011. [cited 2021 Apr 20]. Available from: http://www.theses.fr/2011ISAL0112.

Council of Science Editors:

Van den Broek d'Obrenan G. Adaptation du procédé RTM (Moulage par Transfert de Résine) à la mise en œuvre de matériaux composites à matrice thermoplastique : The adaptation of the RTM (Resin Transfer Molding) process to manufacture thermoplastic-based composites. [Doctoral Dissertation]. INSA Lyon; 2011. Available from: http://www.theses.fr/2011ISAL0112


University of Victoria

24. Keulen, Casey James. Design and manufacturing of composite structures using the resin transfer molding technique.

Degree: Dept. of Mechanical Engineering, 2007, University of Victoria

 Composite materials have the potential to revolutionize life in the 21st century. They are contributing significantly to developments in aerospace, hydrogen fuel cells, electronics and… (more)

Subjects/Keywords: Composite Materials; Resin Transfer Molding; RTM; UVic Subject Index::Sciences and Engineering::Engineering::Mechanical engineering

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Keulen, C. J. (2007). Design and manufacturing of composite structures using the resin transfer molding technique. (Masters Thesis). University of Victoria. Retrieved from http://hdl.handle.net/1828/294

Chicago Manual of Style (16th Edition):

Keulen, Casey James. “Design and manufacturing of composite structures using the resin transfer molding technique.” 2007. Masters Thesis, University of Victoria. Accessed April 20, 2021. http://hdl.handle.net/1828/294.

MLA Handbook (7th Edition):

Keulen, Casey James. “Design and manufacturing of composite structures using the resin transfer molding technique.” 2007. Web. 20 Apr 2021.

Vancouver:

Keulen CJ. Design and manufacturing of composite structures using the resin transfer molding technique. [Internet] [Masters thesis]. University of Victoria; 2007. [cited 2021 Apr 20]. Available from: http://hdl.handle.net/1828/294.

Council of Science Editors:

Keulen CJ. Design and manufacturing of composite structures using the resin transfer molding technique. [Masters Thesis]. University of Victoria; 2007. Available from: http://hdl.handle.net/1828/294

25. Fontanier, Jean-Charles. Développement d'un système réactif pour composites acryliques par procédé RTM : Acrylic thermoplastic-based composites as processed by RTM.

Degree: Docteur es, Matériaux polymères et composites, 2017, Lyon

Le contexte environnemental actuel conduit les constructeurs automobiles à diminuer les émissions globales de CO2. Afin de répondre à cet objectif, plusieurs voies sont accessibles… (more)

Subjects/Keywords: Composite à matrice polymère; Polymère thermoplastique; Matrice acrylique; Polymérisation radicalaire; Moulage par transfert de résine; Réaction de Diels-Adler; Cinétique de polymérisation; Renforcement; Polymer matrix composite; Thermoplastics; Acrylic matrix; Free radical polymerization; RTM - Resin transfer molding; Diels-Alder reaction; Kinetics of polymerization; Reinforcement; 620.192 118 072

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Fontanier, J. (2017). Développement d'un système réactif pour composites acryliques par procédé RTM : Acrylic thermoplastic-based composites as processed by RTM. (Doctoral Dissertation). Lyon. Retrieved from http://www.theses.fr/2017LYSEI024

Chicago Manual of Style (16th Edition):

Fontanier, Jean-Charles. “Développement d'un système réactif pour composites acryliques par procédé RTM : Acrylic thermoplastic-based composites as processed by RTM.” 2017. Doctoral Dissertation, Lyon. Accessed April 20, 2021. http://www.theses.fr/2017LYSEI024.

MLA Handbook (7th Edition):

Fontanier, Jean-Charles. “Développement d'un système réactif pour composites acryliques par procédé RTM : Acrylic thermoplastic-based composites as processed by RTM.” 2017. Web. 20 Apr 2021.

Vancouver:

Fontanier J. Développement d'un système réactif pour composites acryliques par procédé RTM : Acrylic thermoplastic-based composites as processed by RTM. [Internet] [Doctoral dissertation]. Lyon; 2017. [cited 2021 Apr 20]. Available from: http://www.theses.fr/2017LYSEI024.

Council of Science Editors:

Fontanier J. Développement d'un système réactif pour composites acryliques par procédé RTM : Acrylic thermoplastic-based composites as processed by RTM. [Doctoral Dissertation]. Lyon; 2017. Available from: http://www.theses.fr/2017LYSEI024

26. Ertekin, Ayca. Analysis of Wetting, Flow and End-use Properties of Resin Transfer Molded Nanoreinforced Epoxy-glass Fiber Hybrid Composites.

Degree: PhD, Polymer Engineering, 2008, University of Akron

  In this research, the usage of single wall carbon nanotubes (SWNTs) and nanoclays in the resin transfer molding (RTM) of biaxially stitched micro-fiber reinforced… (more)

Subjects/Keywords: Engineering; Polymers; resin transfer molding; wetting; nanoreinforcements; epoxy; glass fiber; hybrid composites

Resin Transfer Molding . …......137 3.5.1 Thermogravimetric Analysis (TGA)… …5.3 Summary .. …198 VI. ANALYSIS OF RESIN TRANSFER MOLDING OF EPOXY… …199 viii 6.1 Analysis of the Resin Transfer Molding of Nanoclay or Nanotube Enriched… …fibers via a conventional liquid composite molding (LCM) technique, resin transfer… …213 6.3 Summary….. 226 VII. PROPERTIES OF RESIN TRANSFER MOLDED… 

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Ertekin, A. (2008). Analysis of Wetting, Flow and End-use Properties of Resin Transfer Molded Nanoreinforced Epoxy-glass Fiber Hybrid Composites. (Doctoral Dissertation). University of Akron. Retrieved from http://rave.ohiolink.edu/etdc/view?acc_num=akron1203418277

Chicago Manual of Style (16th Edition):

Ertekin, Ayca. “Analysis of Wetting, Flow and End-use Properties of Resin Transfer Molded Nanoreinforced Epoxy-glass Fiber Hybrid Composites.” 2008. Doctoral Dissertation, University of Akron. Accessed April 20, 2021. http://rave.ohiolink.edu/etdc/view?acc_num=akron1203418277.

MLA Handbook (7th Edition):

Ertekin, Ayca. “Analysis of Wetting, Flow and End-use Properties of Resin Transfer Molded Nanoreinforced Epoxy-glass Fiber Hybrid Composites.” 2008. Web. 20 Apr 2021.

Vancouver:

Ertekin A. Analysis of Wetting, Flow and End-use Properties of Resin Transfer Molded Nanoreinforced Epoxy-glass Fiber Hybrid Composites. [Internet] [Doctoral dissertation]. University of Akron; 2008. [cited 2021 Apr 20]. Available from: http://rave.ohiolink.edu/etdc/view?acc_num=akron1203418277.

Council of Science Editors:

Ertekin A. Analysis of Wetting, Flow and End-use Properties of Resin Transfer Molded Nanoreinforced Epoxy-glass Fiber Hybrid Composites. [Doctoral Dissertation]. University of Akron; 2008. Available from: http://rave.ohiolink.edu/etdc/view?acc_num=akron1203418277


Virginia Tech

27. Rau, Anand V. Processing of toughened cyanate ester matrix composites.

Degree: PhD, Engineering Mechanics, 1996, Virginia Tech

Subjects/Keywords: toughened resins; cyanate esters; fabric composites; resin transfer molding; process optimization; damage tolerance; LD5655.V856 1996.R38

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Rau, A. V. (1996). Processing of toughened cyanate ester matrix composites. (Doctoral Dissertation). Virginia Tech. Retrieved from http://hdl.handle.net/10919/38020

Chicago Manual of Style (16th Edition):

Rau, Anand V. “Processing of toughened cyanate ester matrix composites.” 1996. Doctoral Dissertation, Virginia Tech. Accessed April 20, 2021. http://hdl.handle.net/10919/38020.

MLA Handbook (7th Edition):

Rau, Anand V. “Processing of toughened cyanate ester matrix composites.” 1996. Web. 20 Apr 2021.

Vancouver:

Rau AV. Processing of toughened cyanate ester matrix composites. [Internet] [Doctoral dissertation]. Virginia Tech; 1996. [cited 2021 Apr 20]. Available from: http://hdl.handle.net/10919/38020.

Council of Science Editors:

Rau AV. Processing of toughened cyanate ester matrix composites. [Doctoral Dissertation]. Virginia Tech; 1996. Available from: http://hdl.handle.net/10919/38020

28. Lutz, Vincent. Carbon nanotubes as nanofillers or fibers for multifunctional epoxy-based composites : Nanotubes de carbone sous forme de nanoparticules ou fibres pour les composites multifonctionnels fibre de carbone/matrice époxy.

Degree: Docteur es, Matériaux polymères et composites, 2014, INSA Lyon

L’utilisation de composites à matrice thermodurcissable et fibres continues est en constante progression dans le secteur aéronautique, ferroviaire, et automobile. Afin d’améliorer les composites obtenus,… (more)

Subjects/Keywords: Composite à matrice polymère; Polymère thermodurcissable; Nanocomposite; Nanotube de carbone; Fibre de carbone; Moulage par transfert de résine; Test de fragmentation; Contrainte de cisaillement interfacial; Interface; Interphase; Emission acoustique; Spectroscopie Raman; Polymer matrix composite; Thermosetting polymer; Nanocomposite; Carbon nanotube; Carbon fiber; RTM - Resin transfer molding; Fragmentation test; Interfacial shear strength; Interface; Interphase; Acoustic emission; Raman Spectroscopy; 620.192 118 072

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Lutz, V. (2014). Carbon nanotubes as nanofillers or fibers for multifunctional epoxy-based composites : Nanotubes de carbone sous forme de nanoparticules ou fibres pour les composites multifonctionnels fibre de carbone/matrice époxy. (Doctoral Dissertation). INSA Lyon. Retrieved from http://www.theses.fr/2014ISAL0039

Chicago Manual of Style (16th Edition):

Lutz, Vincent. “Carbon nanotubes as nanofillers or fibers for multifunctional epoxy-based composites : Nanotubes de carbone sous forme de nanoparticules ou fibres pour les composites multifonctionnels fibre de carbone/matrice époxy.” 2014. Doctoral Dissertation, INSA Lyon. Accessed April 20, 2021. http://www.theses.fr/2014ISAL0039.

MLA Handbook (7th Edition):

Lutz, Vincent. “Carbon nanotubes as nanofillers or fibers for multifunctional epoxy-based composites : Nanotubes de carbone sous forme de nanoparticules ou fibres pour les composites multifonctionnels fibre de carbone/matrice époxy.” 2014. Web. 20 Apr 2021.

Vancouver:

Lutz V. Carbon nanotubes as nanofillers or fibers for multifunctional epoxy-based composites : Nanotubes de carbone sous forme de nanoparticules ou fibres pour les composites multifonctionnels fibre de carbone/matrice époxy. [Internet] [Doctoral dissertation]. INSA Lyon; 2014. [cited 2021 Apr 20]. Available from: http://www.theses.fr/2014ISAL0039.

Council of Science Editors:

Lutz V. Carbon nanotubes as nanofillers or fibers for multifunctional epoxy-based composites : Nanotubes de carbone sous forme de nanoparticules ou fibres pour les composites multifonctionnels fibre de carbone/matrice époxy. [Doctoral Dissertation]. INSA Lyon; 2014. Available from: http://www.theses.fr/2014ISAL0039

29. Orliac, Jean-Guillaume. Analyse et simulation du comportement anisotrope lors de la mise en forme de renforts tissés interlock : Analysis and simulation of anisotropic behavior for the preforming of 3D interlocks composite reinforcements.

Degree: Docteur es, Mécanique, Simulation numérique, Matériaux composites, 2012, INSA Lyon

Afin de pouvoir prédire le comportement des renforts de composites 3D interlock au cours d'un procédé de mise en forme, il est nécessaire de connaitre… (more)

Subjects/Keywords: Composite à matrice polymère; Moulage par transfert de résine; Renfort tissé; Mise en forme; Procédé de fabrication; Simulation; Propriété mécanique; Comportement hyperélastique; Echelle mésoscopique; Echelle macroscopique; Grande déformation; Méthode des éléments finis; Polymer matrix composite; RTM - Resin transfer molding; Woven reinforcement; Shaping; Manufacturing process; Mechanical properties; Hyperelastic behaviour; Mesoscopic approach; Macroscopic approach; Large deformation; Finite element method; 620.192 118 072

…23 Resin Transfer Molding… … leur réalisation notamment dans le cadre du procédé RTM (Resin Transfert Molding… …Resin Transfer Moulding) sont les plus utilisés. Ce sont des procédés « moule fermé… …injection de résine ("Resin Transfer Moulding" en anglais) permet d'… …version 1 - 16 May 2013 Le VARI (Vacuum Assisted Resin Infusion) consiste placer le… 

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Orliac, J. (2012). Analyse et simulation du comportement anisotrope lors de la mise en forme de renforts tissés interlock : Analysis and simulation of anisotropic behavior for the preforming of 3D interlocks composite reinforcements. (Doctoral Dissertation). INSA Lyon. Retrieved from http://www.theses.fr/2012ISAL0121

Chicago Manual of Style (16th Edition):

Orliac, Jean-Guillaume. “Analyse et simulation du comportement anisotrope lors de la mise en forme de renforts tissés interlock : Analysis and simulation of anisotropic behavior for the preforming of 3D interlocks composite reinforcements.” 2012. Doctoral Dissertation, INSA Lyon. Accessed April 20, 2021. http://www.theses.fr/2012ISAL0121.

MLA Handbook (7th Edition):

Orliac, Jean-Guillaume. “Analyse et simulation du comportement anisotrope lors de la mise en forme de renforts tissés interlock : Analysis and simulation of anisotropic behavior for the preforming of 3D interlocks composite reinforcements.” 2012. Web. 20 Apr 2021.

Vancouver:

Orliac J. Analyse et simulation du comportement anisotrope lors de la mise en forme de renforts tissés interlock : Analysis and simulation of anisotropic behavior for the preforming of 3D interlocks composite reinforcements. [Internet] [Doctoral dissertation]. INSA Lyon; 2012. [cited 2021 Apr 20]. Available from: http://www.theses.fr/2012ISAL0121.

Council of Science Editors:

Orliac J. Analyse et simulation du comportement anisotrope lors de la mise en forme de renforts tissés interlock : Analysis and simulation of anisotropic behavior for the preforming of 3D interlocks composite reinforcements. [Doctoral Dissertation]. INSA Lyon; 2012. Available from: http://www.theses.fr/2012ISAL0121

.