subject:(Metals)

North-West University

1. Huyser, M H. Determination of metal concentrations in vegetation, soil, dust, and water in the vicinity of a cement factory in North West province, South Africa / M.H Huyser .

Degree: 2012, North-West University

URL: http://hdl.handle.net/10394/15716

► On a per capita basis, cement is the second most widely consumed product in the world and its demand is increasing globally due to population… (more)

▼ On a per capita basis, cement is the second most widely consumed product in the world and its demand is increasing globally due to population growth and urbanisation. Manufacturing plants produce cement kiln dust (CKD) as one of the by-products while coal provides the dominant energy source in the manufacturing process. Various meta ls are found in CKD and some of these are micro nutrients with potentially toxic effects. If these are present in large quantities, they pose a direct threat to vegetation, animals and humans. The aim o f this study was to quantify a selected number of trace metal concentrations in vegetation, soil , dust and water samples near a cement manufacturing pl ant in the North West Province. Thirty-one samples at various distances from approximately 500m to 2700m from where the cement factory is situated, were collected. In addition, similar samples (except for water) were taken from a control site situated 72 kilometres in a north-western direction from the factory. The water control sample was collected from the Ditsobotla municipal water supply. Soil. plant and dust samples as well as the sediment from the water sample were acid digested to obtain total metal concentrations . The acid digested samples were analyzed for selected metal concentrations using the ICP-MS. The relationship between soil metal concentrations and particle size distribution as well as the relationship between dust concentrations and Ca concentrations was established to determine the link with the presence on a CMP in the area. The control samples, reference standards and results from similar research performed were used to compare with metal concentrations found in this study. The study revealed that Ni and Cu concentrations are higher in the silt fraction of the soil whilst V, Co, Zn and Pb in the silt fraction are only marginally higher than the complete soil sample. Only Cr and Mn concentrations were higher in soil samples than the control and reference values, while metal concentrations for Cr, Cu, Pb and Mn were higher in the dust samples than the control and the Emission Limit Value (EL V). Moreover, metal concentrations in the vegetation samples are not a concern as the concentrations a re lower than reference values. Cadmium and As levels are of no concern in this study area especially since dust samples had undetectably low levels. The condition of the environment m relation to pollution from the cement factory was established. Although some metals revealed lower concentrations, the study demonstrated the potential of metal contamination particularly Ni, Mn and Cr to the environment vis-a vis on the surrounding vegetation, animals and possibly on humans. It was therefore recommended that ELV limits for South Africa should be established and monitored for cement factories in South Africa coupled with sustainable land management policies.

Subjects/Keywords: Metals

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Huyser, M. H. (2012). Determination of metal concentrations in vegetation, soil, dust, and water in the vicinity of a cement factory in North West province, South Africa / M.H Huyser . (Thesis). North-West University. Retrieved from http://hdl.handle.net/10394/15716

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Huyser, M H. “Determination of metal concentrations in vegetation, soil, dust, and water in the vicinity of a cement factory in North West province, South Africa / M.H Huyser .” 2012. Thesis, North-West University. Accessed February 28, 2020. http://hdl.handle.net/10394/15716.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Huyser, M H. “Determination of metal concentrations in vegetation, soil, dust, and water in the vicinity of a cement factory in North West province, South Africa / M.H Huyser .” 2012. Web. 28 Feb 2020.

Vancouver:

Huyser MH. Determination of metal concentrations in vegetation, soil, dust, and water in the vicinity of a cement factory in North West province, South Africa / M.H Huyser . [Internet] [Thesis]. North-West University; 2012. [cited 2020 Feb 28]. Available from: http://hdl.handle.net/10394/15716.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Huyser MH. Determination of metal concentrations in vegetation, soil, dust, and water in the vicinity of a cement factory in North West province, South Africa / M.H Huyser . [Thesis]. North-West University; 2012. Available from: http://hdl.handle.net/10394/15716

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Cape Peninsula University of Technology

2. Melato, Aupaki Michael. Bioaccumulation of metals in the Kuils River, Western Cape .

Degree: 2011, Cape Peninsula University of Technology

URL: http://etd.cput.ac.za/handle/20.500.11838/2013

► World wide urban rivers are the most utilised and degraded. A variety of everyday sources of metal pollution exist that is entrenched in the modern… (more)

▼ World wide urban rivers are the most utilised and degraded. A variety of everyday sources of metal pollution exist that is entrenched in the modern way of life. Lately there has been a tremendous growth in the establishment and development of human settlements, both formal and informal in the Cape Town area. The surroundings of the Kuils River are not excluded from this. There are various communities in close proximity to the Kuils River. Due to this, more industries are also being established. This has caused an increased production of potential environmental pollutants, including metals. The aim of the study was firstly, to identify potential sources of metal pollution along the entire length of the Kuils River, in order to identify sampling sites. Secondly, to identify the metals contaminating the water and sediment of the Kuils River. Thirdly, to determine the bioaccumulation of metals in freshwater snails (Physa ecuta). Four sampling sites were identified along the Kuils River. Freshwater snails (P. acuta), sediment and water were collected every 2 months for a period of one year. The following metals were investigated: Aluminium (AI), Cadmium (Cd) Cobalt (Co), Chromium (Cr), Copper (Cu), Iron (Fe), Lead (Pb), Manganese (Mn), Nickel (Ni.) and Zinc (Zn). Samples were digested with 55% nitric acid. The Inductively Coupled Plasma - Atomic Emission Spectrometer (ICP-AES) were used for metal analyses. The results were statistically analysed by means of ANOVA on ranks using the Sigmastat statistical package. Results revealed that most metals found in water, sediment and snails had significantly higher concentrations at site 1. This is possibly due to input from the surrounding urban area and nearly agricultural activities. Water concentrations of AI, Cu, Mn and Zn were higher than the DWAF (1996) guidelines. Sediment was mostly contaminated with AI, Fe, Pb and Zn, while the snails contained significant levels of Cu, Fe, Mn and Zn. Further investigations involving toxicity testing should be conducted to determine the toxicity of these metals to (Physa acuta). Advisors/Committee Members: Odendaal, J. P (advisor), Snyman, R. G (advisor).

Subjects/Keywords: Metals – Bioaccumulation; Metals – Environmental aspects

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Melato, A. M. (2011). Bioaccumulation of metals in the Kuils River, Western Cape . (Thesis). Cape Peninsula University of Technology. Retrieved from http://etd.cput.ac.za/handle/20.500.11838/2013

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Melato, Aupaki Michael. “Bioaccumulation of metals in the Kuils River, Western Cape .” 2011. Thesis, Cape Peninsula University of Technology. Accessed February 28, 2020. http://etd.cput.ac.za/handle/20.500.11838/2013.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Melato, Aupaki Michael. “Bioaccumulation of metals in the Kuils River, Western Cape .” 2011. Web. 28 Feb 2020.

Vancouver:

Melato AM. Bioaccumulation of metals in the Kuils River, Western Cape . [Internet] [Thesis]. Cape Peninsula University of Technology; 2011. [cited 2020 Feb 28]. Available from: http://etd.cput.ac.za/handle/20.500.11838/2013.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Melato AM. Bioaccumulation of metals in the Kuils River, Western Cape . [Thesis]. Cape Peninsula University of Technology; 2011. Available from: http://etd.cput.ac.za/handle/20.500.11838/2013

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

University of Hawaii – Manoa

3. Katahara, Keith W. Pressure dependence of the elastic moduli of body-centered-cubic transition metals.

Degree: PhD, 2009, University of Hawaii – Manoa

URL: http://hdl.handle.net/10125/9823

►

Typescript.

Bibliography: leaves 134-143.

Microfiche.

viii, 143 leaves ill

The single-crystal elastic moduli, Cij, and their pressure derivatives, dCij/dP, have been measured ultrasonically at 25°C… (more)

Subjects/Keywords: Transition metals

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Katahara, K. W. (2009). Pressure dependence of the elastic moduli of body-centered-cubic transition metals. (Doctoral Dissertation). University of Hawaii – Manoa. Retrieved from http://hdl.handle.net/10125/9823

Chicago Manual of Style (16^th Edition):

Katahara, Keith W. “Pressure dependence of the elastic moduli of body-centered-cubic transition metals.” 2009. Doctoral Dissertation, University of Hawaii – Manoa. Accessed February 28, 2020. http://hdl.handle.net/10125/9823.

MLA Handbook (7^th Edition):

Katahara, Keith W. “Pressure dependence of the elastic moduli of body-centered-cubic transition metals.” 2009. Web. 28 Feb 2020.

Vancouver:

Katahara KW. Pressure dependence of the elastic moduli of body-centered-cubic transition metals. [Internet] [Doctoral dissertation]. University of Hawaii – Manoa; 2009. [cited 2020 Feb 28]. Available from: http://hdl.handle.net/10125/9823.

Council of Science Editors:

Katahara KW. Pressure dependence of the elastic moduli of body-centered-cubic transition metals. [Doctoral Dissertation]. University of Hawaii – Manoa; 2009. Available from: http://hdl.handle.net/10125/9823

Rochester Institute of Technology

4. Grantham, Suzanne. Embracing the celestial body.

Degree: School for American Crafts (CIAS), 1996, Rochester Institute of Technology

URL: https://scholarworks.rit.edu/theses/3230

None provided. Advisors/Committee Members: Urso, Leonard, Stanitz, Mark, Bell, Roberley.

Subjects/Keywords: Metals

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Grantham, S. (1996). Embracing the celestial body. (Thesis). Rochester Institute of Technology. Retrieved from https://scholarworks.rit.edu/theses/3230

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Grantham, Suzanne. “Embracing the celestial body.” 1996. Thesis, Rochester Institute of Technology. Accessed February 28, 2020. https://scholarworks.rit.edu/theses/3230.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Grantham, Suzanne. “Embracing the celestial body.” 1996. Web. 28 Feb 2020.

Vancouver:

Grantham S. Embracing the celestial body. [Internet] [Thesis]. Rochester Institute of Technology; 1996. [cited 2020 Feb 28]. Available from: https://scholarworks.rit.edu/theses/3230.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Grantham S. Embracing the celestial body. [Thesis]. Rochester Institute of Technology; 1996. Available from: https://scholarworks.rit.edu/theses/3230

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Rochester Institute of Technology

5. Stickell, Angela. Simplicity.

Degree: School for American Crafts (CIAS), 1996, Rochester Institute of Technology

URL: https://scholarworks.rit.edu/theses/2648

► My thesis work is intended to be part of an ongoing polemic concerning the value of modernism. Modernism occurred at a time in history when… (more)

Subjects/Keywords: Metals

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Stickell, A. (1996). Simplicity. (Thesis). Rochester Institute of Technology. Retrieved from https://scholarworks.rit.edu/theses/2648

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Stickell, Angela. “Simplicity.” 1996. Thesis, Rochester Institute of Technology. Accessed February 28, 2020. https://scholarworks.rit.edu/theses/2648.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Stickell, Angela. “Simplicity.” 1996. Web. 28 Feb 2020.

Vancouver:

Stickell A. Simplicity. [Internet] [Thesis]. Rochester Institute of Technology; 1996. [cited 2020 Feb 28]. Available from: https://scholarworks.rit.edu/theses/2648.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Stickell A. Simplicity. [Thesis]. Rochester Institute of Technology; 1996. Available from: https://scholarworks.rit.edu/theses/2648

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Rochester Institute of Technology

6. Takemura, Ryota. Mechanics of interaction.

Degree: MFA, School for American Crafts (CIAS), 2011, Rochester Institute of Technology

URL: https://scholarworks.rit.edu/theses/3512

► My work focuses on the senses that we take for granted when we experience art. We often disregard how our bodies work in relation… (more)

Subjects/Keywords: Metals; SAC

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Takemura, R. (2011). Mechanics of interaction. (Thesis). Rochester Institute of Technology. Retrieved from https://scholarworks.rit.edu/theses/3512

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Takemura, Ryota. “Mechanics of interaction.” 2011. Thesis, Rochester Institute of Technology. Accessed February 28, 2020. https://scholarworks.rit.edu/theses/3512.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Takemura, Ryota. “Mechanics of interaction.” 2011. Web. 28 Feb 2020.

Vancouver:

Takemura R. Mechanics of interaction. [Internet] [Thesis]. Rochester Institute of Technology; 2011. [cited 2020 Feb 28]. Available from: https://scholarworks.rit.edu/theses/3512.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Takemura R. Mechanics of interaction. [Thesis]. Rochester Institute of Technology; 2011. Available from: https://scholarworks.rit.edu/theses/3512

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

7. Li, Xiaoyan. Large-scale Atomistic Simulations for Deformation and Fracture Mechanisms of Nanotwinned Metals.

Degree: PhD, Solid Mechanics, 2012, Brown University

URL: https://repository.library.brown.edu/studio/item/bdr:297638/

► Nanotwinned metals have exhibited enhanced mechanical properties, including ultra-high strength, good ductility and remarkable fracture toughness. In this dissertation, we used large-scale atomistic simulations to… (more)

▼ Nanotwinned metals have exhibited enhanced mechanical properties, including ultra-high strength, good ductility and remarkable fracture toughness. In this dissertation, we used large-scale atomistic simulations to investigate deformation and fracture behaviors of nanotwinned metals, in forms of bulk, thin films and nanopillars. The work is organized in three parts. In the first part (Chapter 4), we performed large-scale atomistic simulations to study deformation mechanisms in equiaxed- and columnar-grained polycrystalline nanotwinned bulk Cu. Three dislocation-based mechanisms are revealed. In the equiaxed-grained nanotwinned Cu, it was found that dislocation cutting through or pileup on twin boundary (TB) is a controlling mechanism, leading to strength hardening. However, when TB spacing falls below a critical size, the strength softening governed by nucleation and motion of partial dislocations parallel to TBs was observed in our simulations. To characterize such twin size-mediated softening, we have proposed a scaling law (including two microstructural dimensions, i.e. mean grain size and TB spacing) based on kinetic theory of dislocation nucleation. For columnar-grained nanotwinned Cu, when the tensile axis is parallel to TBs, the movement of threading dislocations confined inside twin lamellae dominates plastic deformation. The second part (Chapter 5) is dedicated to interpret a novel toughening mechanism (crack bridging) observed in in-situ experiments on nanotwinned Cu thin films. Atomistic simulations showed that during plastic deformation, initially clean TB can transform to a dislocation wall which can block further dislocation activity and resist crack propagation, leading to experimentally observed crack-bridging behavior, i.e. nanoscale twins serve as uncracked ligaments. The formation of dislocation wall is attributed to interaction between dislocations emitted from crack tip and TBs. The third part (Chapter 6) is devoted to investigate mechanical responses of nanotwinned Cu nanopillars with different TB orientations. Atomistic simulations showed that the strain localization (such as necking or shear banding) is a governing deformation mechanism in nanotwinned nanopillars with orthogonal TBs, while the detwinning dominates plastic deformation of nanopillars with slanted TBs. The difference in deformation mechanisms leads to substantially different strengths in corresponding nanopillars. Atomistic simulations also demonstrated that TB-surface intersection is a preferential dislocation nucleation site in nanopillars with different TB orientations. Advisors/Committee Members: Gao, Huajian (Director), Kumar, Sharvan (Reader), Bower, Allan (Reader).

Subjects/Keywords: nanotwinned metals

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Li, X. (2012). Large-scale Atomistic Simulations for Deformation and Fracture Mechanisms of Nanotwinned Metals. (Doctoral Dissertation). Brown University. Retrieved from https://repository.library.brown.edu/studio/item/bdr:297638/

Chicago Manual of Style (16^th Edition):

Li, Xiaoyan. “Large-scale Atomistic Simulations for Deformation and Fracture Mechanisms of Nanotwinned Metals.” 2012. Doctoral Dissertation, Brown University. Accessed February 28, 2020. https://repository.library.brown.edu/studio/item/bdr:297638/.

MLA Handbook (7^th Edition):

Li, Xiaoyan. “Large-scale Atomistic Simulations for Deformation and Fracture Mechanisms of Nanotwinned Metals.” 2012. Web. 28 Feb 2020.

Vancouver:

Li X. Large-scale Atomistic Simulations for Deformation and Fracture Mechanisms of Nanotwinned Metals. [Internet] [Doctoral dissertation]. Brown University; 2012. [cited 2020 Feb 28]. Available from: https://repository.library.brown.edu/studio/item/bdr:297638/.

Council of Science Editors:

Li X. Large-scale Atomistic Simulations for Deformation and Fracture Mechanisms of Nanotwinned Metals. [Doctoral Dissertation]. Brown University; 2012. Available from: https://repository.library.brown.edu/studio/item/bdr:297638/

8. Agrawal, Neeta. Separation and determination of trace metals; -.

Degree: Chemistry, 1993, Pt. Ravishankar Shukla University

URL: http://shodhganga.inflibnet.ac.in/handle/10603/42973

None

Bibliography p.202-207

Advisors/Committee Members: Patel, K S.

Subjects/Keywords: Metals

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Agrawal, N. (1993). Separation and determination of trace metals; -. (Thesis). Pt. Ravishankar Shukla University. Retrieved from http://shodhganga.inflibnet.ac.in/handle/10603/42973

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Agrawal, Neeta. “Separation and determination of trace metals; -.” 1993. Thesis, Pt. Ravishankar Shukla University. Accessed February 28, 2020. http://shodhganga.inflibnet.ac.in/handle/10603/42973.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Agrawal, Neeta. “Separation and determination of trace metals; -.” 1993. Web. 28 Feb 2020.

Vancouver:

Agrawal N. Separation and determination of trace metals; -. [Internet] [Thesis]. Pt. Ravishankar Shukla University; 1993. [cited 2020 Feb 28]. Available from: http://shodhganga.inflibnet.ac.in/handle/10603/42973.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Agrawal N. Separation and determination of trace metals; -. [Thesis]. Pt. Ravishankar Shukla University; 1993. Available from: http://shodhganga.inflibnet.ac.in/handle/10603/42973

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Nelson Mandela Metropolitan University

9. Erasmus, Daniel Jacobus. The fatigue life cycle prediction of a light aircraft undercarriage.

Degree: Faculty of Engineering, 2010, Nelson Mandela Metropolitan University

URL: http://hdl.handle.net/10948/1527

► The reliability of systems relies heavily on accurate fatigue life prediction of related components. Fatigue life prediction is a complicated process requiring the correct methodology… (more)

Subjects/Keywords: Metals – Fatigue

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Erasmus, D. J. (2010). The fatigue life cycle prediction of a light aircraft undercarriage. (Thesis). Nelson Mandela Metropolitan University. Retrieved from http://hdl.handle.net/10948/1527

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Erasmus, Daniel Jacobus. “The fatigue life cycle prediction of a light aircraft undercarriage.” 2010. Thesis, Nelson Mandela Metropolitan University. Accessed February 28, 2020. http://hdl.handle.net/10948/1527.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Erasmus, Daniel Jacobus. “The fatigue life cycle prediction of a light aircraft undercarriage.” 2010. Web. 28 Feb 2020.

Vancouver:

Erasmus DJ. The fatigue life cycle prediction of a light aircraft undercarriage. [Internet] [Thesis]. Nelson Mandela Metropolitan University; 2010. [cited 2020 Feb 28]. Available from: http://hdl.handle.net/10948/1527.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Erasmus DJ. The fatigue life cycle prediction of a light aircraft undercarriage. [Thesis]. Nelson Mandela Metropolitan University; 2010. Available from: http://hdl.handle.net/10948/1527

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Montana State University

10. McVicker, Grace. Effect of permanent deformation on elastic properties of metals.

Degree: College of Letters & Science, 1928, Montana State University

URL: https://scholarworks.montana.edu/xmlui/handle/1/5704

Subjects/Keywords: Metals.

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

McVicker, G. (1928). Effect of permanent deformation on elastic properties of metals. (Thesis). Montana State University. Retrieved from https://scholarworks.montana.edu/xmlui/handle/1/5704

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

McVicker, Grace. “Effect of permanent deformation on elastic properties of metals.” 1928. Thesis, Montana State University. Accessed February 28, 2020. https://scholarworks.montana.edu/xmlui/handle/1/5704.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

McVicker, Grace. “Effect of permanent deformation on elastic properties of metals.” 1928. Web. 28 Feb 2020.

Vancouver:

McVicker G. Effect of permanent deformation on elastic properties of metals. [Internet] [Thesis]. Montana State University; 1928. [cited 2020 Feb 28]. Available from: https://scholarworks.montana.edu/xmlui/handle/1/5704.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

McVicker G. Effect of permanent deformation on elastic properties of metals. [Thesis]. Montana State University; 1928. Available from: https://scholarworks.montana.edu/xmlui/handle/1/5704

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

McGill University

11. Mahfoud, Musbah. The wettability of ceramic-coated steel substrates by liquid metals.

Degree: M. Eng., Department of Mining and Metallurgical Engineering, 1992, McGill University

URL: http://digitool.library.mcgill.ca/thesisfile156709.pdf

►

Note:

Hazelett Caster steel belts, used to continuously cast strips and slabs by the twin-belt caster, are often coated with a thermally-sprayed ceramic powder. One… (more)

Subjects/Keywords: Metals

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Mahfoud, M. (1992). The wettability of ceramic-coated steel substrates by liquid metals. (Masters Thesis). McGill University. Retrieved from http://digitool.library.mcgill.ca/thesisfile156709.pdf

Chicago Manual of Style (16^th Edition):

Mahfoud, Musbah. “The wettability of ceramic-coated steel substrates by liquid metals.” 1992. Masters Thesis, McGill University. Accessed February 28, 2020. http://digitool.library.mcgill.ca/thesisfile156709.pdf.

MLA Handbook (7^th Edition):

Mahfoud, Musbah. “The wettability of ceramic-coated steel substrates by liquid metals.” 1992. Web. 28 Feb 2020.

Vancouver:

Mahfoud M. The wettability of ceramic-coated steel substrates by liquid metals. [Internet] [Masters thesis]. McGill University; 1992. [cited 2020 Feb 28]. Available from: http://digitool.library.mcgill.ca/thesisfile156709.pdf.

Council of Science Editors:

Mahfoud M. The wettability of ceramic-coated steel substrates by liquid metals. [Masters Thesis]. McGill University; 1992. Available from: http://digitool.library.mcgill.ca/thesisfile156709.pdf

12. Γκλόντιτς, Παύλε. Formation, stability and structure of transition metal oxide clusters.

Degree: 2017, University of Crete (UOC); Πανεπιστήμιο Κρήτης

URL: http://hdl.handle.net/10442/hedi/40782

►

The research discussed in this thesis has two different aspects. In the first part we investigated the influence of solvation on the photodissociation dynamics of… (more)

Subjects/Keywords: Clusters; Transition metals; Clusters; Transition metals

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Γκλόντιτς, �. (2017). Formation, stability and structure of transition metal oxide clusters. (Thesis). University of Crete (UOC); Πανεπιστήμιο Κρήτης. Retrieved from http://hdl.handle.net/10442/hedi/40782

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Γκλόντιτς, Παύλε. “Formation, stability and structure of transition metal oxide clusters.” 2017. Thesis, University of Crete (UOC); Πανεπιστήμιο Κρήτης. Accessed February 28, 2020. http://hdl.handle.net/10442/hedi/40782.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Γκλόντιτς, Παύλε. “Formation, stability and structure of transition metal oxide clusters.” 2017. Web. 28 Feb 2020.

Vancouver:

Γκλόντιτς �. Formation, stability and structure of transition metal oxide clusters. [Internet] [Thesis]. University of Crete (UOC); Πανεπιστήμιο Κρήτης; 2017. [cited 2020 Feb 28]. Available from: http://hdl.handle.net/10442/hedi/40782.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Γκλόντιτς �. Formation, stability and structure of transition metal oxide clusters. [Thesis]. University of Crete (UOC); Πανεπιστήμιο Κρήτης; 2017. Available from: http://hdl.handle.net/10442/hedi/40782

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Nelson Mandela Metropolitan University

13. Madanhire, Tatenda. Synthesis and characterisation of lanthanide complexes with nitrogen- and oxygen-donor ligands.

Degree: Faculty of Science, 2016, Nelson Mandela Metropolitan University

URL: http://hdl.handle.net/10948/13127

► The reactions of Ln(NO3)3∙6H2O (Ln = Pr, Nd or Er) with the potentially tridentate O,N,O chelating ligand 2,6-pyridinedimethanol (H2pydm) were investigated, and complexes with the… (more)

▼ The reactions of Ln(NO3)3∙6H2O (Ln = Pr, Nd or Er) with the potentially tridentate O,N,O chelating ligand 2,6-pyridinedimethanol (H2pydm) were investigated, and complexes with the formula, [Ln(H2pydm)2(NO3)2](NO3) (Ln = Pr or Nd) and [Er(H2pydm)3](NO3)3 were isolated. The ten-coordinate Pr(III) and Nd(III) compounds crystallise in the triclinic space group P-1 while the nine-coordinate Er(III) complex crystallises in the monoclinic system (P21/n). The reaction of PrCl3∙6H2O with H2pydm yielded the compound, [Pr(H2pydm)3](Cl)3, that crystallises in the monoclinic system, space group P21/c with α = 90, β = 98.680(1) and γ = 90°. The nine-coordinate Pr(III) ion is bound to three H2pydm ligands, with bond distances Pr-O 2.455(2)-2.478(2) Å and Pr-N 2.6355(19)-2.64(2) Å. X-ray crystal structures of all the H2pydm complexes reveal that the ligand coordinates tridentately, via the pyridyl nitrogen atom and the two hydroxyl oxygen atoms. The electronic absorption spectra of complexes show 4f-4f transitions. Rare-earth complexes, [Ln(H2L1)2(NO3)3] [Ln = Gd, Ho or Nd], were also prepared from a Schiff base. The X-ray single-crystal diffraction studies and SHAPE analyses of the Gd(III) and Ho(III) complexes shows that the complexes are ten-coordinate and exhibit distorted tetradecahedron geometries. With proton migration occurring from the phenol group to the imine function, complexation of the lanthanides to the ligand gives the ligand a zwitterionic phenoxo-iminium form. A phenolate oxygen-bridged dinuclear complex, [Ce2(H2L1)(ovan)3(NO3)3], has been obtained by reacting Ce(NO3)3∙6H2O with an o-vanillin derived Schiff base ligand, 2-((E)-(1-hydroxy-2-methylpropan-2-ylimino)methyl)-6-methoxyphenol (H2L1). Hydrolysis of the Schiff base occurred to yield o-vanillin, which bridged two cerium atoms with the Ce∙∙∙Ce distance equal to 3.823 Å. The Ce(III) ions are both tencoordinate, but have different coordination environments, showing tetradecahedron and staggered dodecahedron geometries, respectively. The reaction of salicylaldehyde-N(4)-diethylthiosemicarbazone (H2L2) in the presence of hydrated Ln(III) nitrates led to the isolation of two novel compounds: (E)-2[(ortho-hydroxy)benzylidene]-2-(thiomethyl)-thionohydrazide (1) and bis[2,3-diaza4-(2-hydroxyphenyl)-1-thiomethyl-buta-1,3-diene]disulfide. The latter is a dimer of the former. For this asymmetric Schiff base, 1 and the symmetric disulfide, classical hydrogen bonds of the O–H∙∙∙N as well as N–H∙∙∙S (for 1) type are apparent next to C–H∙∙∙O contacts. 4-(4-Bromophenyl)-1-(propan-2-ylidene)thiosemicarbazide was also prepared upon reacting 4-(4-bromophenyl)-3-thiosemicarbazide with acetone in the presence of ethanol and La(NO3)3∙6H2O. The C=S bond length was found to be 1.6686(16) Å which is in good agreement with other thioketones whose metrical parameters have been deposited with the Cambridge Structural Database. Classical hydrogen bonds of the N–H∙∙∙N and the N–H∙∙∙Br type are observed next to C–H∙∙∙S contacts. All synthesised compounds were characterised by…

Subjects/Keywords: Rare earth metals

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Madanhire, T. (2016). Synthesis and characterisation of lanthanide complexes with nitrogen- and oxygen-donor ligands. (Thesis). Nelson Mandela Metropolitan University. Retrieved from http://hdl.handle.net/10948/13127

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Madanhire, Tatenda. “Synthesis and characterisation of lanthanide complexes with nitrogen- and oxygen-donor ligands.” 2016. Thesis, Nelson Mandela Metropolitan University. Accessed February 28, 2020. http://hdl.handle.net/10948/13127.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Madanhire, Tatenda. “Synthesis and characterisation of lanthanide complexes with nitrogen- and oxygen-donor ligands.” 2016. Web. 28 Feb 2020.

Vancouver:

Madanhire T. Synthesis and characterisation of lanthanide complexes with nitrogen- and oxygen-donor ligands. [Internet] [Thesis]. Nelson Mandela Metropolitan University; 2016. [cited 2020 Feb 28]. Available from: http://hdl.handle.net/10948/13127.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Madanhire T. Synthesis and characterisation of lanthanide complexes with nitrogen- and oxygen-donor ligands. [Thesis]. Nelson Mandela Metropolitan University; 2016. Available from: http://hdl.handle.net/10948/13127

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

University of Hong Kong

14. 張啟謙; Cheung, Kai-him, Matthew. Bioremediation of toxic metals.

Degree: MSin Environmental, 2013, University of Hong Kong

URL: Cheung, K. M. [張啟謙]. (2013). Bioremediation of toxic metals. (Thesis). University of Hong Kong, Pokfulam, Hong Kong SAR. Retrieved from http://dx.doi.org/10.5353/th_b5099049 ; http://dx.doi.org/10.5353/th_b5099049 ; http://hdl.handle.net/10722/194562

►

Traditional remediation techniques in removing toxic metal contaminants using physical and chemical methods are expensive and may cause other forms of damage to the environment,… (more)

▼

Traditional remediation techniques in removing toxic metal contaminants using physical and chemical methods are expensive and may cause other forms of damage to the environment, comparing with these techniques bioremediation can serve as an inexpensive, effective and environmental friendly remediation method. This thesis mainly discusses different bioremediation techniques and identifies possible areas in Hong Kong for bioremediation and suggests bioremediation methods for each potential area. Bioremediation of toxic metals is the use of microorganisms, plants, or even larger sized organisms to decontaminate sites with toxic metals. Bioremediation includes phytoremediation, microremediation and vermiremediation which use plants, microorganisms and earthworms to remediate contaminated environments respectively. The 4 most common mechanisms in phytoremediation of toxic metals are phytoextraction, phytofiltration, phytovolatilization and phytostabilization. Phytoremediation are used frequently for remediation around the world and its development includes using well-understood technology and genetic engineering to increase its effectiveness. Microremediation is another promising technology in bioremediation of toxic metals and consists of 6 major mechanisms which are biosorption, bioaccumulation, biotransformation, bioleaching, biomineralization and microbially-enhanced chemisorption of metals. Microremediation is mainly in research phase and its development includes identifying new species, combining with phytoremediation and genetic engineering. Vermiremediation is another rapidly developing technique in bioremediation of toxic metals, assisting other bioremediation by burrowing actions of earthworms and its excretion, and accumulating toxic metals inside their bodies. Vermiremediation is also in research phase but it is rapidly developing. Generally, bioremediation is around 60% cheaper than traditional remediation methods and no pollutants are emitted during the process. However the remediation process is slow and generally takes longer than a year. Sources of toxic metals in contaminated areas in Hong Kong are mainly due to historic industrial discharge although present activities also contribute. Potential areas include sites for electronic waste activities, sediments of Kwun Tong typhoon shelter and sediments of Tolo Harbour.

published_or_final_version

Environmental Management

Master

Master of Science in Environmental Management

Subjects/Keywords: Heavy metals - Biodegradation

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

張啟謙; Cheung, Kai-him, M. (2013). Bioremediation of toxic metals. (Masters Thesis). University of Hong Kong. Retrieved from Cheung, K. M. [張啟謙]. (2013). Bioremediation of toxic metals. (Thesis). University of Hong Kong, Pokfulam, Hong Kong SAR. Retrieved from http://dx.doi.org/10.5353/th_b5099049 ; http://dx.doi.org/10.5353/th_b5099049 ; http://hdl.handle.net/10722/194562

Chicago Manual of Style (16^th Edition):

張啟謙; Cheung, Kai-him, Matthew. “Bioremediation of toxic metals.” 2013. Masters Thesis, University of Hong Kong. Accessed February 28, 2020. Cheung, K. M. [張啟謙]. (2013). Bioremediation of toxic metals. (Thesis). University of Hong Kong, Pokfulam, Hong Kong SAR. Retrieved from http://dx.doi.org/10.5353/th_b5099049 ; http://dx.doi.org/10.5353/th_b5099049 ; http://hdl.handle.net/10722/194562.

MLA Handbook (7^th Edition):

張啟謙; Cheung, Kai-him, Matthew. “Bioremediation of toxic metals.” 2013. Web. 28 Feb 2020.

Vancouver:

張啟謙; Cheung, Kai-him M. Bioremediation of toxic metals. [Internet] [Masters thesis]. University of Hong Kong; 2013. [cited 2020 Feb 28]. Available from: Cheung, K. M. [張啟謙]. (2013). Bioremediation of toxic metals. (Thesis). University of Hong Kong, Pokfulam, Hong Kong SAR. Retrieved from http://dx.doi.org/10.5353/th_b5099049 ; http://dx.doi.org/10.5353/th_b5099049 ; http://hdl.handle.net/10722/194562.

Council of Science Editors:

張啟謙; Cheung, Kai-him M. Bioremediation of toxic metals. [Masters Thesis]. University of Hong Kong; 2013. Available from: Cheung, K. M. [張啟謙]. (2013). Bioremediation of toxic metals. (Thesis). University of Hong Kong, Pokfulam, Hong Kong SAR. Retrieved from http://dx.doi.org/10.5353/th_b5099049 ; http://dx.doi.org/10.5353/th_b5099049 ; http://hdl.handle.net/10722/194562

University of Hong Kong

15. Leung, So-sum. Size effect on micro-metal strength simulated by discrete dislocation and dislocation density-function dynamics.

Degree: PhD, 2015, University of Hong Kong

URL: Leung, S. [梁素芯]. (2015). Size effect on micro-metal strength simulated by discrete dislocation and dislocation density-function dynamics. (Thesis). University of Hong Kong, Pokfulam, Hong Kong SAR. Retrieved from http://dx.doi.org/10.5353/th_b5699930 ; http://hdl.handle.net/10722/223007

► The pronounced smaller-being-stronger size effect of nano- and micron-metals has been extensively explored by experimental approaches and simulations in recent decades. In this study, 2D… (more)

▼ The pronounced smaller-being-stronger size effect of nano- and micron-metals has been extensively explored by experimental approaches and simulations in recent decades. In this study, 2D dislocation dynamics (2D DD) was used to simulate the tensile deformation of micron-sized polycrystalline fcc metals. When the grain size is constant, changing the specimen thickness increases the yield strength either when the thickness-to-grain size ratio (t-to-d ratio) is <1 regardless of the initial dislocation density (and dislocation source density), or when the initial dislocation and dislocation source density are both low regardless of the t-to-d ratio. The above is the “smaller being stronger” phenomenon in polycrystals. “Smaller being weaker”, on the other hand, occurs when 1<t-to-d ratio<̃ 3 and the initial dislocation and source density are high. In addition, when the specimen thickness is kept constant, the Hall-Petch relationship is not strictly obeyed when the thickness is approaching the smallest grain size studied. Apart from the size effect in poly-crystals, single crystals are also known to exhibit pronounced size effect. The size effect of single crystals can be expressed in a power-law σ~D-m, in which the exponent m ranges from ~0.3 to ~1.0. Dislocation-density function dynamics was used in this study to explore the relationship between the size dependence of the yield strength and the dislocation microstructure in different specimen sizes. The “post-mortem” dislocation structure was analyzed to work out a length scale governing the size effect. It was found that the initial dislocation structure has a significant effect on the yield strength of single crystals. For the dislocation microstructure studied, specimens of sizes ~4000 b and ~8000 b are more significantly affected by the stochasticity of the initial dislocation micron structure, whereas the initial dislocation structure could be easily disentangled in even smaller specimens and thus the strength depend less on the initial microstructure. For larger specimen (~16000 b), there is less stochasticity in the initial microstructure, since the specimen size is larger than the characteristic length describing the dislocation mean free path of the specimen. DDFD is also used to study the tensile deformation of tri-crystals. The grain size effect on the strength was studied. The simulated relationship between the 0.2% proof stress and the inverse square root obeys the Hall-Petch relation. In addition, the internal length scale was computed by applying a strain gradient plasticity theory (SG) to the 1D strain profile derived from DDFD results. To shed light on the identity of the internal length scale (l), l is compared with two characteristic lengths that describe the tri-crystal microstructure: the mean dislocation spacing 1/√p and the dislocation pile-up length. The internal length scale in general approximates to the pile-up length. Exception is found for the largest grain size L=500 nm when the strain is large in which l approximates to the mean…

Subjects/Keywords: Dislocations in metals

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Leung, S. (2015). Size effect on micro-metal strength simulated by discrete dislocation and dislocation density-function dynamics. (Doctoral Dissertation). University of Hong Kong. Retrieved from Leung, S. [梁素芯]. (2015). Size effect on micro-metal strength simulated by discrete dislocation and dislocation density-function dynamics. (Thesis). University of Hong Kong, Pokfulam, Hong Kong SAR. Retrieved from http://dx.doi.org/10.5353/th_b5699930 ; http://hdl.handle.net/10722/223007

Chicago Manual of Style (16^th Edition):

Leung, So-sum. “Size effect on micro-metal strength simulated by discrete dislocation and dislocation density-function dynamics.” 2015. Doctoral Dissertation, University of Hong Kong. Accessed February 28, 2020. Leung, S. [梁素芯]. (2015). Size effect on micro-metal strength simulated by discrete dislocation and dislocation density-function dynamics. (Thesis). University of Hong Kong, Pokfulam, Hong Kong SAR. Retrieved from http://dx.doi.org/10.5353/th_b5699930 ; http://hdl.handle.net/10722/223007.

MLA Handbook (7^th Edition):

Leung, So-sum. “Size effect on micro-metal strength simulated by discrete dislocation and dislocation density-function dynamics.” 2015. Web. 28 Feb 2020.

Vancouver:

Leung S. Size effect on micro-metal strength simulated by discrete dislocation and dislocation density-function dynamics. [Internet] [Doctoral dissertation]. University of Hong Kong; 2015. [cited 2020 Feb 28]. Available from: Leung, S. [梁素芯]. (2015). Size effect on micro-metal strength simulated by discrete dislocation and dislocation density-function dynamics. (Thesis). University of Hong Kong, Pokfulam, Hong Kong SAR. Retrieved from http://dx.doi.org/10.5353/th_b5699930 ; http://hdl.handle.net/10722/223007.

Council of Science Editors:

Leung S. Size effect on micro-metal strength simulated by discrete dislocation and dislocation density-function dynamics. [Doctoral Dissertation]. University of Hong Kong; 2015. Available from: Leung, S. [梁素芯]. (2015). Size effect on micro-metal strength simulated by discrete dislocation and dislocation density-function dynamics. (Thesis). University of Hong Kong, Pokfulam, Hong Kong SAR. Retrieved from http://dx.doi.org/10.5353/th_b5699930 ; http://hdl.handle.net/10722/223007

Anna University

16. Mariappan, S S. Studies on mixed ligand complexes of Transition metals; -.

Degree: Science and Humanities, 2014, Anna University

URL: http://shodhganga.inflibnet.ac.in/handle/10603/27475

►

The field of coordination chemistry is growing exponentially in the newlinerecent years especially the complexation of transition metals with bioligands newlineTransition metals are essential for… (more)

Subjects/Keywords: Schiff; Transition metals

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Mariappan, S. S. (2014). Studies on mixed ligand complexes of Transition metals; -. (Thesis). Anna University. Retrieved from http://shodhganga.inflibnet.ac.in/handle/10603/27475

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Mariappan, S S. “Studies on mixed ligand complexes of Transition metals; -.” 2014. Thesis, Anna University. Accessed February 28, 2020. http://shodhganga.inflibnet.ac.in/handle/10603/27475.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Mariappan, S S. “Studies on mixed ligand complexes of Transition metals; -.” 2014. Web. 28 Feb 2020.

Vancouver:

Mariappan SS. Studies on mixed ligand complexes of Transition metals; -. [Internet] [Thesis]. Anna University; 2014. [cited 2020 Feb 28]. Available from: http://shodhganga.inflibnet.ac.in/handle/10603/27475.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Mariappan SS. Studies on mixed ligand complexes of Transition metals; -. [Thesis]. Anna University; 2014. Available from: http://shodhganga.inflibnet.ac.in/handle/10603/27475

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Nelson Mandela Metropolitan University

17. Coetzee, Louis-Charl Cloete. A study of lanthanide complexes with di-2-pyridyl ligands.

Degree: Faculty of Science, 2016, Nelson Mandela Metropolitan University

URL: http://hdl.handle.net/10948/4731

► The ligands di(2-pyridyl) ketone (DPK) and cis-1,2 di(2-pyridyl) ethylene (DPE) are N,N,Odonor ligands that can undergo nucleophilic addition and become more flexible for coordination. The… (more)

▼ The ligands di(2-pyridyl) ketone (DPK) and cis-1,2 di(2-pyridyl) ethylene (DPE) are N,N,Odonor ligands that can undergo nucleophilic addition and become more flexible for coordination. The reaction between the lanthanide thiocyanate salt and DPK gave rise to seven novel complexes of the general formula [Ln(NCS)3(DPKOH)3], where Ln = La, Ce, Nd, Eu, Tb, Dy and Ho. 1H NMR spectroscopy verified that the ligand underwent nucleophilic addition upon coordination. This was further confirmed using UV-Vis spectroscopy which showed a shift in the absorption bands due to conjugation of electrons within the pyridyl ring upon coordination. UV-Vis spectroscopy was also utilised to test the covalent character of the neodymium and holmium complexes. X-ray diffraction and IR spectroscopy showed that three DPK ligands coordinated bidentately through a pyridinic nitrogen and a hydroxyl oxygen, while three isothiocyanato molecules completed the coordination environment around each metal. Furthermore, X-ray diffraction also revealed that these complexes are isostructural, ninecoordinate and the polyhedron which encloses each ion is of trigonal tricapped prismatic shape with D3h symmetry. Micro-analysis on all the complexes, except lanthanum and holmium confirmed the molecular formulae produced from the crystallographic data of each complex. The reaction between the lanthanide thiocyanate salt and DPE produced poor quality crystals which could not be detected by X-ray diffraction. The lanthanide salts used for this reaction were lanthanum, neodymium, europium, dysprosium and holmium. Upon coordination, conductivity measurements detected the presence of lanthanide ions in each solution. 1H NMR and IR spectroscopic studies showed that the ethylenic moiety of DPE underwent nucleophilic addition upon coordination. UV-Vis spectroscopy further confirmed nucleophilic addition upon coordination due to shifts in absorption bands. IR spectroscopy verified the possibility of a bidentate coordination to each metal through a pyridinic nitrogen and a hydroxyl oxygen as well as a monodentate coordination through isothiocyanato ligands. A micro-analysis on all the complexes provided the molecular formulae that can best fit each complex. The effect of the solvent molecules on the bonding parameters of the lanthanum complex was investigated. An analysis of the results produced from crystallographic data revealed the presence of intermolecular forces which interacted and stabilised the complex.

Subjects/Keywords: Rare earth metals

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Coetzee, L. C. (2016). A study of lanthanide complexes with di-2-pyridyl ligands. (Thesis). Nelson Mandela Metropolitan University. Retrieved from http://hdl.handle.net/10948/4731

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Coetzee, Louis-Charl Cloete. “A study of lanthanide complexes with di-2-pyridyl ligands.” 2016. Thesis, Nelson Mandela Metropolitan University. Accessed February 28, 2020. http://hdl.handle.net/10948/4731.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Coetzee, Louis-Charl Cloete. “A study of lanthanide complexes with di-2-pyridyl ligands.” 2016. Web. 28 Feb 2020.

Vancouver:

Coetzee LC. A study of lanthanide complexes with di-2-pyridyl ligands. [Internet] [Thesis]. Nelson Mandela Metropolitan University; 2016. [cited 2020 Feb 28]. Available from: http://hdl.handle.net/10948/4731.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Coetzee LC. A study of lanthanide complexes with di-2-pyridyl ligands. [Thesis]. Nelson Mandela Metropolitan University; 2016. Available from: http://hdl.handle.net/10948/4731

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Victoria University of Wellington

18. Zayya, Almas Ismaeil. Synthesis and Coordination of Bicyclic Phosphorus-Nitrogen Ligands.

Degree: 2010, Victoria University of Wellington

URL: http://hdl.handle.net/10063/1476

► This thesis describes the synthesis and coordination chemistry of bicyclic phosphorus-nitrogen (PN) ligands containing the rigid and preorganised bicyclo[3.3.1]nonan-9-one framework. The PN ligands were prepared… (more)

▼ This thesis describes the synthesis and coordination chemistry of bicyclic phosphorus-nitrogen (PN) ligands containing the rigid and preorganised bicyclo[3.3.1]nonan-9-one framework. The PN ligands were prepared via the Mannich condensation reaction of four different phosphorinanone classes with amines and aldehydes. The phosphorinanone compounds, 2,6-dimethyl-3,5-diphenyl-4-phenyl-4- phosphacyclohexanone (isomers 50 and 51), 3,5-diphenyl-4-phenyl-4- phosphacyclohexanone (44, 45) and 4-phenyl-4-phosphacyclohexanone (42) were prepared by literature methods, whereas the isomers of 4-t-butyl-2,6- di(carbomethoxy) - 3,5 - bis(p - dimethylaminophenyl) - 4 - phosphacyclohexanone (53, 54) were synthesised by the reaction of ButPH2 with 2,4-di(carbomethoxy)- 1,5 - bis(p - dimethylaminophenyl)penta - 1,4 - dien - 3 - one (38). The Mannich reactions of phosphorinanones 50 and 51 were not successful, whereas the reactions of 44, 45 and 42 produced unidentifiable products. The reaction of phosphorinanone 53 with methylamine and formaldehyde produced the bicyclic PN compound 7-t-butyl-1,5-di(carbomethoxy)-6,8-bis(p-dimethylaminophenyl)- 3 - methyl - 3 - aza - 7 - phosphabicyclo[3.3.1]nonan - 9 - one (65). The identical Mannich reaction of phosphorinanone 54 also yielded 65, as well as the PN compound 4-t-butyl-6-carbomethoxy-5-(p-dimethylaminophenyl)- 2-methyl-2-aza-4-phosphacyclohexanone (66) and the E/Z isomers of 3-(p-dimethylaminophenyl)methyl-2-propenoate (67). The bicyclic PN ligand 65 adopts a chair-chair conformation in solution and the solid state as confirmed by X-ray crystallography. The coordination chemistry of this ligand was comprehensively explored with rhodium, palladium and platinum, and a wide range of complexes were synthesised including [ML2(65)] (M = Pd, Pt; L = Cl, Me), [ML(65)] (M = Rh, Pd, Pt; L = C2H4, cod, dba, norb) (cod = cycloocta-1,5-diene, dba = trans,trans- dibenzylideneacetone, norb = norborn-2-ene), [Pd(n3 -C3H5)(65)]X (X = Cl, SbF6) and [PtL(65)]CH(SO2CF3)2 (L = 1-o,4-5-n-C8H13, 1-3-n-C8H13). Cycloplatination at the ortho-position of the 6,8-dimethylaminophenyl sub- stituents was an interesting feature of the coordination chemistry of PN ligand 65. Ortho-metallation at both dimethylaminophenyl groups led to the formation of complex [Pt(C2H4)(65-2H)] (76), whereas metallation of only one aryl group produced the complex [Pt(C8H13)(65-H)] (87). Further reaction of complex 76 yielded the trans- and cis-hydroxo-bridged dimers [Pt2(u-OH)2(65-H)2] (98, 101). The nitrogen donor atom is not coordinated to the platinum metal centres in the cyclometallated PN complexes. Protonation of [Pt(C2H4)(65)] (75) with CH2(SO2CF3)2 produced the hydride complex [PtH{CH(SO2CF3)2}(65)] (92) and the agostic ethyl complex [Pt(C2H5)(65)]CH(SO2CF3)2 (93). Similarly, protonation of [Pt(norb)(65)] (74) with CHPh(SO2CF3)2 gave the norbornyl agostic complex [Pt(C7H11)(65)]CPh(SO2CF3)2 (94) as confirmed by X-ray crystallography. In addition, hydrated analogues of some of the coordination complexes of PN ligand 65 mentioned… Advisors/Committee Members: Spencer, John.

Subjects/Keywords: Bispidinones; Phosphorianone; Metals

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Zayya, A. I. (2010). Synthesis and Coordination of Bicyclic Phosphorus-Nitrogen Ligands. (Doctoral Dissertation). Victoria University of Wellington. Retrieved from http://hdl.handle.net/10063/1476

Chicago Manual of Style (16^th Edition):

Zayya, Almas Ismaeil. “Synthesis and Coordination of Bicyclic Phosphorus-Nitrogen Ligands.” 2010. Doctoral Dissertation, Victoria University of Wellington. Accessed February 28, 2020. http://hdl.handle.net/10063/1476.

MLA Handbook (7^th Edition):

Zayya, Almas Ismaeil. “Synthesis and Coordination of Bicyclic Phosphorus-Nitrogen Ligands.” 2010. Web. 28 Feb 2020.

Vancouver:

Zayya AI. Synthesis and Coordination of Bicyclic Phosphorus-Nitrogen Ligands. [Internet] [Doctoral dissertation]. Victoria University of Wellington; 2010. [cited 2020 Feb 28]. Available from: http://hdl.handle.net/10063/1476.

Council of Science Editors:

Zayya AI. Synthesis and Coordination of Bicyclic Phosphorus-Nitrogen Ligands. [Doctoral Dissertation]. Victoria University of Wellington; 2010. Available from: http://hdl.handle.net/10063/1476

Rochester Institute of Technology

19. Martin, Jacob. Artifact.

Degree: MFA, School for American Crafts (CAD), 2019, Rochester Institute of Technology

URL: https://scholarworks.rit.edu/theses/10321

► During the creation of this work, I identified and acquired various contemporary objects relating to branding, consumerism, and fads. Through a process of artificial… (more)

▼ During the creation of this work, I identified and acquired various contemporary objects relating to branding, consumerism, and fads. Through a process of artificial aging, ranging from abrading, cutting, and sandblasting to burying them in soil and chemical treatments of bleach, salt and ammonia, I made the objects appear as if they had been removed from an archeological site after centuries under ground. I incorporated these apparently ancient contemporary consumer items into new compositions using mostly silver and aluminum. These new objects are created using traditional metal-smithing techniques and bearing a resemblance to classicism in form as well. The designs reference ritual objects from a variety of world cultural and religious traditions combined with a retro-futurism science fiction aesthetic. By combining these new items that look old with fine metalwork that is classical but looks new I am creating an ambiguity of time, place, and tradition in order to transport the observer into a viewpoint that forces questioning of our own place in history. Like all science fiction literature or film, I am using the past and future to speak about contemporary issues. What I am interested in exploring is the functions and purpose of myth, ritual, and religion in past culture systems and identifying, in our modern world of science and reason that has been for centuries becoming increasingly secular, how it is that we have managed to fill the void created by the absence of the old rules. Whatever one chooses to call it, whether it is myth or ritual or religion, it has served an important functional role in the growth and sustainability of all cultural systems. These belief structures provided our ancestors (and many people still today) with a level of perceived objectivity, social cohesion and cooperation, order, stability, hierarchies, and a way to guide the members of cultural systems through the turmoil of birth, the pains of growing, the tension of adulthood, and finally through the mystery of death. What I am interested in identifying is what it is in our modern, secular cultural system that has filled the void created by secularization and replaced the old mechanism with new to provide similar functions. Through the process of ideation and creation of this body of work the major system I have identified as filling the role played previously by myth is that of consumerism, capitalism, and wealth. This question of the new mythic structure in the modern world is not a new question and I am not the first person to identify capitalism and its bi-products as filling this role, but through this body of work and its method of display I aim to bring the concept to a more literal and digestible examination. Advisors/Committee Members: Leonard Urso, Juan Carlos Caballero-Perez, John Aasp.

Subjects/Keywords: Jewelry; Metals; Sculpture

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Martin, J. (2019). Artifact. (Thesis). Rochester Institute of Technology. Retrieved from https://scholarworks.rit.edu/theses/10321

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Martin, Jacob. “Artifact.” 2019. Thesis, Rochester Institute of Technology. Accessed February 28, 2020. https://scholarworks.rit.edu/theses/10321.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Martin, Jacob. “Artifact.” 2019. Web. 28 Feb 2020.

Vancouver:

Martin J. Artifact. [Internet] [Thesis]. Rochester Institute of Technology; 2019. [cited 2020 Feb 28]. Available from: https://scholarworks.rit.edu/theses/10321.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Martin J. Artifact. [Thesis]. Rochester Institute of Technology; 2019. Available from: https://scholarworks.rit.edu/theses/10321

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

University of South Africa

20. Zuma, Vincent Thulani. Determination and characterisation of trace metals and persistant oganic pollutants in Baynespruit river, Sobantu, KwaZulu-Natal, South Africa.

Degree: 2017, University of South Africa

URL: http://hdl.handle.net/10500/23624

► This study assesses the presence of selected trace metals and pops in the Baynespruit River, Sobantu, KwaZulu-Natal. Sediments, plants and water samples were collected along… (more)

Subjects/Keywords: Sediments; Metals; Plant metals; Metals in water; POPs; Metal concentration; Analytical

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Zuma, V. T. (2017). Determination and characterisation of trace metals and persistant oganic pollutants in Baynespruit river, Sobantu, KwaZulu-Natal, South Africa. (Masters Thesis). University of South Africa. Retrieved from http://hdl.handle.net/10500/23624

Chicago Manual of Style (16^th Edition):

Zuma, Vincent Thulani. “Determination and characterisation of trace metals and persistant oganic pollutants in Baynespruit river, Sobantu, KwaZulu-Natal, South Africa.” 2017. Masters Thesis, University of South Africa. Accessed February 28, 2020. http://hdl.handle.net/10500/23624.

MLA Handbook (7^th Edition):

Zuma, Vincent Thulani. “Determination and characterisation of trace metals and persistant oganic pollutants in Baynespruit river, Sobantu, KwaZulu-Natal, South Africa.” 2017. Web. 28 Feb 2020.

Vancouver:

Zuma VT. Determination and characterisation of trace metals and persistant oganic pollutants in Baynespruit river, Sobantu, KwaZulu-Natal, South Africa. [Internet] [Masters thesis]. University of South Africa; 2017. [cited 2020 Feb 28]. Available from: http://hdl.handle.net/10500/23624.

Council of Science Editors:

Zuma VT. Determination and characterisation of trace metals and persistant oganic pollutants in Baynespruit river, Sobantu, KwaZulu-Natal, South Africa. [Masters Thesis]. University of South Africa; 2017. Available from: http://hdl.handle.net/10500/23624

Ryerson University

21. Booran, Shahrad K. Recovery of Zn2+ and Ni2+ binary from wastewater using integrated biosorption and electro-deposition.

Degree: 2014, Ryerson University

URL: https://digital.library.ryerson.ca/islandora/object/RULA%3A3072

► In 2012, the United States environmental protection agency (USEPA) prepared a list of 129 organic and inorganic pollutants found in wastewater that constitute serious health… (more)

Subjects/Keywords: Sewage – Purification – Heavy metals removal; Sewage – Purification – Metals removal; Metals – Absorption and adsorption; Metals – Environmental aspects; Water – Purification; Absorption; Metals

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Booran, S. K. (2014). Recovery of Zn2+ and Ni2+ binary from wastewater using integrated biosorption and electro-deposition. (Thesis). Ryerson University. Retrieved from https://digital.library.ryerson.ca/islandora/object/RULA%3A3072

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Booran, Shahrad K. “Recovery of Zn2+ and Ni2+ binary from wastewater using integrated biosorption and electro-deposition.” 2014. Thesis, Ryerson University. Accessed February 28, 2020. https://digital.library.ryerson.ca/islandora/object/RULA%3A3072.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Booran, Shahrad K. “Recovery of Zn2+ and Ni2+ binary from wastewater using integrated biosorption and electro-deposition.” 2014. Web. 28 Feb 2020.

Vancouver:

Booran SK. Recovery of Zn2+ and Ni2+ binary from wastewater using integrated biosorption and electro-deposition. [Internet] [Thesis]. Ryerson University; 2014. [cited 2020 Feb 28]. Available from: https://digital.library.ryerson.ca/islandora/object/RULA%3A3072.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Booran SK. Recovery of Zn2+ and Ni2+ binary from wastewater using integrated biosorption and electro-deposition. [Thesis]. Ryerson University; 2014. Available from: https://digital.library.ryerson.ca/islandora/object/RULA%3A3072

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

University of Tasmania

22. Stauber, Jennifer L. (Jennifer Lee). Toxicity of metals in biological systems.

Degree: 1996, University of Tasmania

URL: https://eprints.utas.edu.au/21683/1/whole_StauberJenniferLee1997_thesis.pdf

► This thesis incorporates reports of research on the development and application of innovative chemical and biochemical techniques to the study of mechanisms of metal toxicity… (more)

▼ This thesis incorporates reports of research on the development and application of innovative chemical and biochemical techniques to the study of mechanisms of metal toxicity m simple single-celled organisms and more complex multicellular organisms including humans. The thesis is based on research undertaken over the last 10 years and published m 26 refereed scientific papers Single-celled algae are the foundation of most aquatic food chains and account for much of the productivity of aquatic ecosystems Marine and freshwater algae are particularly sensitive to a wide range of metals and organic compounds, and their viability can be used as an indicator of environmental change. Chrome toxicity tests, based on algal growth and enzyme inhibition, have been developed and applied to assessments of the bioavailability and toxicity of metals in aquatic systems Specific applications of the algal bioassays for assessing mine-derived contaminants in natural systems has been described Knowledge of modes of action of different metal species at a sub-cellular level is essential to understanding and predicting the bioavailability and toxicity of metals in natural waters. Research on the mechanisms of toxicity of copper and zinc to microalgae has been described, with particular emphasis on the link between chemical speciation and toxicity Research on the mechanisms of toxicity of metals was extended from the study of simple unicellular organisms to investigating metal toxicity in humans. Novel methods for analysing metals in human sweat, urine and hair were developed, with particular emphasis on lead and manganese These techniques were used to study skin absorption of lead in occupationally-exposed workers and in the study of manganese toxicity in Australian aborigines from Groote Eylandt, Northern Territory Skin absorption was identified as a new route of exposure to inorganic lead in humans The ability of lead salts to enter the body through the skin without significantly raising blood lead levels has important implications for occupational health control because measurement of lead in blood is the main criterion which has previously been used to assess exposure Additional biological monitoring techniques that can detect skin-absorbed lead are now required by occupational health and safety authorities. The research described in this thesis has shown that the mechanisms of toxicity of metals is largely dependant on the chemical form of the metal. By taking into account the speciation of the metal and its mode of action within the cell, it is now possible to predict the toxicity of metals and to identify those factors which ameliorate toxicity in natural waters and biological systems, thus facilitating timely and cost-effective remediation.

Subjects/Keywords: Metals; Metals in the body; Metals

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Stauber, J. L. (. L. (1996). Toxicity of metals in biological systems. (Thesis). University of Tasmania. Retrieved from https://eprints.utas.edu.au/21683/1/whole_StauberJenniferLee1997_thesis.pdf

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Stauber, Jennifer L (Jennifer Lee). “Toxicity of metals in biological systems.” 1996. Thesis, University of Tasmania. Accessed February 28, 2020. https://eprints.utas.edu.au/21683/1/whole_StauberJenniferLee1997_thesis.pdf.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Stauber, Jennifer L (Jennifer Lee). “Toxicity of metals in biological systems.” 1996. Web. 28 Feb 2020.

Vancouver:

Stauber JL(L. Toxicity of metals in biological systems. [Internet] [Thesis]. University of Tasmania; 1996. [cited 2020 Feb 28]. Available from: https://eprints.utas.edu.au/21683/1/whole_StauberJenniferLee1997_thesis.pdf.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Stauber JL(L. Toxicity of metals in biological systems. [Thesis]. University of Tasmania; 1996. Available from: https://eprints.utas.edu.au/21683/1/whole_StauberJenniferLee1997_thesis.pdf

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

23. Vyas,J M. Studies on tarace metals; -.

Degree: Chemistry, 2014, Gujarat University

URL: http://shodhganga.inflibnet.ac.in/handle/10603/31977

none newline

-

Advisors/Committee Members: Agarwal,Y K.

Subjects/Keywords: tarace metals

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

M, V. (2014). Studies on tarace metals; -. (Thesis). Gujarat University. Retrieved from http://shodhganga.inflibnet.ac.in/handle/10603/31977

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

M, Vyas,J. “Studies on tarace metals; -.” 2014. Thesis, Gujarat University. Accessed February 28, 2020. http://shodhganga.inflibnet.ac.in/handle/10603/31977.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

M, Vyas,J. “Studies on tarace metals; -.” 2014. Web. 28 Feb 2020.

Vancouver:

M V. Studies on tarace metals; -. [Internet] [Thesis]. Gujarat University; 2014. [cited 2020 Feb 28]. Available from: http://shodhganga.inflibnet.ac.in/handle/10603/31977.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

M V. Studies on tarace metals; -. [Thesis]. Gujarat University; 2014. Available from: http://shodhganga.inflibnet.ac.in/handle/10603/31977

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

University of Kashmir

24. Sudan, Amar Singh. Design and development of Oxide Dispersion strengthened ODS Ferritic Alloys through the powder forging route; -.

Degree: Engineering, 1987, University of Kashmir

URL: http://shodhganga.inflibnet.ac.in/handle/10603/54698

►

Iron based chromium aluminium alloys strengthened through rare earth oxide dispersoids are known as ODS alloys They are newlineoften produced through mechanical alloying via the… (more)

Subjects/Keywords: Alloys; Dispersion; Metals; Oxidation

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Sudan, A. S. (1987). Design and development of Oxide Dispersion strengthened ODS Ferritic Alloys through the powder forging route; -. (Thesis). University of Kashmir. Retrieved from http://shodhganga.inflibnet.ac.in/handle/10603/54698

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Sudan, Amar Singh. “Design and development of Oxide Dispersion strengthened ODS Ferritic Alloys through the powder forging route; -.” 1987. Thesis, University of Kashmir. Accessed February 28, 2020. http://shodhganga.inflibnet.ac.in/handle/10603/54698.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Sudan, Amar Singh. “Design and development of Oxide Dispersion strengthened ODS Ferritic Alloys through the powder forging route; -.” 1987. Web. 28 Feb 2020.

Vancouver:

Sudan AS. Design and development of Oxide Dispersion strengthened ODS Ferritic Alloys through the powder forging route; -. [Internet] [Thesis]. University of Kashmir; 1987. [cited 2020 Feb 28]. Available from: http://shodhganga.inflibnet.ac.in/handle/10603/54698.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Sudan AS. Design and development of Oxide Dispersion strengthened ODS Ferritic Alloys through the powder forging route; -. [Thesis]. University of Kashmir; 1987. Available from: http://shodhganga.inflibnet.ac.in/handle/10603/54698

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

University of Kashmir

25. Sudan, Amar Singh. Design and development of Oxide Dispersion strengthened ODS Ferritic Alloys through the powder forging route;.

Degree: 2015, University of Kashmir

URL: http://shodhganga.inflibnet.ac.in/handle/10603/50933

►

Iron based chromium aluminium alloys strengthened through rare earth oxide dispersoids are known as ODS alloys They are newlineoften produced through mechanical alloying via the… (more)

Subjects/Keywords: Metals-Alloys-Oxidation-Dispersion

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Sudan, A. S. (2015). Design and development of Oxide Dispersion strengthened ODS Ferritic Alloys through the powder forging route;. (Thesis). University of Kashmir. Retrieved from http://shodhganga.inflibnet.ac.in/handle/10603/50933

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Sudan, Amar Singh. “Design and development of Oxide Dispersion strengthened ODS Ferritic Alloys through the powder forging route;.” 2015. Thesis, University of Kashmir. Accessed February 28, 2020. http://shodhganga.inflibnet.ac.in/handle/10603/50933.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Sudan, Amar Singh. “Design and development of Oxide Dispersion strengthened ODS Ferritic Alloys through the powder forging route;.” 2015. Web. 28 Feb 2020.

Vancouver:

Sudan AS. Design and development of Oxide Dispersion strengthened ODS Ferritic Alloys through the powder forging route;. [Internet] [Thesis]. University of Kashmir; 2015. [cited 2020 Feb 28]. Available from: http://shodhganga.inflibnet.ac.in/handle/10603/50933.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Sudan AS. Design and development of Oxide Dispersion strengthened ODS Ferritic Alloys through the powder forging route;. [Thesis]. University of Kashmir; 2015. Available from: http://shodhganga.inflibnet.ac.in/handle/10603/50933

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

The Ohio State University

26. Raghavan, Kavesary S. An analytical investigation of the combined effect of geometric defects and thermal gradients on tensile ductility .

Degree: PhD, Graduate School, 1986, The Ohio State University

URL: http://rave.ohiolink.edu/etdc/view?acc_num=osu148726754698191

Subjects/Keywords: Engineering; Metals

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Raghavan, K. S. (1986). An analytical investigation of the combined effect of geometric defects and thermal gradients on tensile ductility . (Doctoral Dissertation). The Ohio State University. Retrieved from http://rave.ohiolink.edu/etdc/view?acc_num=osu148726754698191

Chicago Manual of Style (16^th Edition):

Raghavan, Kavesary S. “An analytical investigation of the combined effect of geometric defects and thermal gradients on tensile ductility .” 1986. Doctoral Dissertation, The Ohio State University. Accessed February 28, 2020. http://rave.ohiolink.edu/etdc/view?acc_num=osu148726754698191.

MLA Handbook (7^th Edition):

Raghavan, Kavesary S. “An analytical investigation of the combined effect of geometric defects and thermal gradients on tensile ductility .” 1986. Web. 28 Feb 2020.

Vancouver:

Raghavan KS. An analytical investigation of the combined effect of geometric defects and thermal gradients on tensile ductility . [Internet] [Doctoral dissertation]. The Ohio State University; 1986. [cited 2020 Feb 28]. Available from: http://rave.ohiolink.edu/etdc/view?acc_num=osu148726754698191.

Council of Science Editors:

Raghavan KS. An analytical investigation of the combined effect of geometric defects and thermal gradients on tensile ductility . [Doctoral Dissertation]. The Ohio State University; 1986. Available from: http://rave.ohiolink.edu/etdc/view?acc_num=osu148726754698191

The Ohio State University

27. Gatts, Robert Roswell. A theory for cumulative fatigue damage in metals.

Degree: PhD, Graduate School, 1959, The Ohio State University

URL: http://rave.ohiolink.edu/etdc/view?acc_num=osu1486473310330708

Subjects/Keywords: Engineering; Metals

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Gatts, R. R. (1959). A theory for cumulative fatigue damage in metals. (Doctoral Dissertation). The Ohio State University. Retrieved from http://rave.ohiolink.edu/etdc/view?acc_num=osu1486473310330708

Chicago Manual of Style (16^th Edition):

Gatts, Robert Roswell. “A theory for cumulative fatigue damage in metals.” 1959. Doctoral Dissertation, The Ohio State University. Accessed February 28, 2020. http://rave.ohiolink.edu/etdc/view?acc_num=osu1486473310330708.

MLA Handbook (7^th Edition):

Gatts, Robert Roswell. “A theory for cumulative fatigue damage in metals.” 1959. Web. 28 Feb 2020.

Vancouver:

Gatts RR. A theory for cumulative fatigue damage in metals. [Internet] [Doctoral dissertation]. The Ohio State University; 1959. [cited 2020 Feb 28]. Available from: http://rave.ohiolink.edu/etdc/view?acc_num=osu1486473310330708.

Council of Science Editors:

Gatts RR. A theory for cumulative fatigue damage in metals. [Doctoral Dissertation]. The Ohio State University; 1959. Available from: http://rave.ohiolink.edu/etdc/view?acc_num=osu1486473310330708

The Ohio State University

28. Nash, Charles Dudley. A Theory of fatigue failure.

Degree: PhD, Graduate School, 1959, The Ohio State University

URL: http://rave.ohiolink.edu/etdc/view?acc_num=osu1486475308017133

Subjects/Keywords: Engineering; Metals

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Nash, C. D. (1959). A Theory of fatigue failure. (Doctoral Dissertation). The Ohio State University. Retrieved from http://rave.ohiolink.edu/etdc/view?acc_num=osu1486475308017133

Chicago Manual of Style (16^th Edition):

Nash, Charles Dudley. “A Theory of fatigue failure.” 1959. Doctoral Dissertation, The Ohio State University. Accessed February 28, 2020. http://rave.ohiolink.edu/etdc/view?acc_num=osu1486475308017133.

MLA Handbook (7^th Edition):

Nash, Charles Dudley. “A Theory of fatigue failure.” 1959. Web. 28 Feb 2020.

Vancouver:

Nash CD. A Theory of fatigue failure. [Internet] [Doctoral dissertation]. The Ohio State University; 1959. [cited 2020 Feb 28]. Available from: http://rave.ohiolink.edu/etdc/view?acc_num=osu1486475308017133.

Council of Science Editors:

Nash CD. A Theory of fatigue failure. [Doctoral Dissertation]. The Ohio State University; 1959. Available from: http://rave.ohiolink.edu/etdc/view?acc_num=osu1486475308017133

The Ohio State University

29. Pierce, Cyril Marvin. Forces involved in the axisymmetric extrusion of metals through conical dies.

Degree: PhD, Graduate School, 1966, The Ohio State University

URL: http://rave.ohiolink.edu/etdc/view?acc_num=osu1486638986099508

Subjects/Keywords: Engineering; Metals

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Pierce, C. M. (1966). Forces involved in the axisymmetric extrusion of metals through conical dies. (Doctoral Dissertation). The Ohio State University. Retrieved from http://rave.ohiolink.edu/etdc/view?acc_num=osu1486638986099508

Chicago Manual of Style (16^th Edition):

Pierce, Cyril Marvin. “Forces involved in the axisymmetric extrusion of metals through conical dies.” 1966. Doctoral Dissertation, The Ohio State University. Accessed February 28, 2020. http://rave.ohiolink.edu/etdc/view?acc_num=osu1486638986099508.

MLA Handbook (7^th Edition):

Pierce, Cyril Marvin. “Forces involved in the axisymmetric extrusion of metals through conical dies.” 1966. Web. 28 Feb 2020.

Vancouver:

Pierce CM. Forces involved in the axisymmetric extrusion of metals through conical dies. [Internet] [Doctoral dissertation]. The Ohio State University; 1966. [cited 2020 Feb 28]. Available from: http://rave.ohiolink.edu/etdc/view?acc_num=osu1486638986099508.

Council of Science Editors:

Pierce CM. Forces involved in the axisymmetric extrusion of metals through conical dies. [Doctoral Dissertation]. The Ohio State University; 1966. Available from: http://rave.ohiolink.edu/etdc/view?acc_num=osu1486638986099508

The Ohio State University

30. Martin, Byron Dale. Low temperature heat capacities of [alpha]-manganese, cesium, and rubidium.

Degree: PhD, Graduate School, 1968, The Ohio State University

URL: http://rave.ohiolink.edu/etdc/view?acc_num=osu1486646311374331

Subjects/Keywords: Physics; Metals

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Martin, B. D. (1968). Low temperature heat capacities of [alpha]-manganese, cesium, and rubidium. (Doctoral Dissertation). The Ohio State University. Retrieved from http://rave.ohiolink.edu/etdc/view?acc_num=osu1486646311374331

Chicago Manual of Style (16^th Edition):

Martin, Byron Dale. “Low temperature heat capacities of [alpha]-manganese, cesium, and rubidium.” 1968. Doctoral Dissertation, The Ohio State University. Accessed February 28, 2020. http://rave.ohiolink.edu/etdc/view?acc_num=osu1486646311374331.

MLA Handbook (7^th Edition):

Martin, Byron Dale. “Low temperature heat capacities of [alpha]-manganese, cesium, and rubidium.” 1968. Web. 28 Feb 2020.

Vancouver:

Martin BD. Low temperature heat capacities of [alpha]-manganese, cesium, and rubidium. [Internet] [Doctoral dissertation]. The Ohio State University; 1968. [cited 2020 Feb 28]. Available from: http://rave.ohiolink.edu/etdc/view?acc_num=osu1486646311374331.

Council of Science Editors:

Martin BD. Low temperature heat capacities of [alpha]-manganese, cesium, and rubidium. [Doctoral Dissertation]. The Ohio State University; 1968. Available from: http://rave.ohiolink.edu/etdc/view?acc_num=osu1486646311374331

		in
And / Or
		in
And / Or
		in
And / Or
		in

Open Access Theses and Dissertations