subject:(Metal Matrix Composites)

Oklahoma State University

1. Cyriac, Ajith James. Metal Matrix Composites: History, Status, Factors and Future.

Degree: Mechanical & Aerospace Engineering, 2011, Oklahoma State University

► The history, status, and future of metal matrix composites are presented by evaluating the progression of available literature through time. The trends that existed and… (more)

Subjects/Keywords: ceramics; composites; metal matrix composites

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Cyriac, A. J. (2011). Metal Matrix Composites: History, Status, Factors and Future. (Thesis). Oklahoma State University. Retrieved from http://hdl.handle.net/11244/9914

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Cyriac, Ajith James. “Metal Matrix Composites: History, Status, Factors and Future.” 2011. Thesis, Oklahoma State University. Accessed January 19, 2020. http://hdl.handle.net/11244/9914.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Cyriac, Ajith James. “Metal Matrix Composites: History, Status, Factors and Future.” 2011. Web. 19 Jan 2020.

Vancouver:

Cyriac AJ. Metal Matrix Composites: History, Status, Factors and Future. [Internet] [Thesis]. Oklahoma State University; 2011. [cited 2020 Jan 19]. Available from: http://hdl.handle.net/11244/9914.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Cyriac AJ. Metal Matrix Composites: History, Status, Factors and Future. [Thesis]. Oklahoma State University; 2011. Available from: http://hdl.handle.net/11244/9914

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Anna University

2. Natarajan, N. Studies on aluminium metal matrix Composite for automotive brake Drum applications; -.

Degree: Mechanical Engineering, 2014, Anna University

URL: http://shodhganga.inflibnet.ac.in/handle/10603/27483

►

In recent years the automobile industry has been facing substantial newlinetechnical challenges as it seeks to improve fuel economy reduce vehicle newlineemissions increase styling options… (more)

Subjects/Keywords: Aluminium metal matrix; Metal Matrix Composites

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Natarajan, N. (2014). Studies on aluminium metal matrix Composite for automotive brake Drum applications; -. (Thesis). Anna University. Retrieved from http://shodhganga.inflibnet.ac.in/handle/10603/27483

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Natarajan, N. “Studies on aluminium metal matrix Composite for automotive brake Drum applications; -.” 2014. Thesis, Anna University. Accessed January 19, 2020. http://shodhganga.inflibnet.ac.in/handle/10603/27483.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Natarajan, N. “Studies on aluminium metal matrix Composite for automotive brake Drum applications; -.” 2014. Web. 19 Jan 2020.

Vancouver:

Natarajan N. Studies on aluminium metal matrix Composite for automotive brake Drum applications; -. [Internet] [Thesis]. Anna University; 2014. [cited 2020 Jan 19]. Available from: http://shodhganga.inflibnet.ac.in/handle/10603/27483.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Natarajan N. Studies on aluminium metal matrix Composite for automotive brake Drum applications; -. [Thesis]. Anna University; 2014. Available from: http://shodhganga.inflibnet.ac.in/handle/10603/27483

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Anna University

3. Raja T. Mechanical behaviour of Aluminium 6082 silicon carbide Particulate composites; -.

Degree: Mechanical Engineering, 2014, Anna University

URL: http://shodhganga.inflibnet.ac.in/handle/10603/26949

►

newlineA growing interest and ever increasing need for improvement of newlineperformance parameters are challenging tasks to be addressed by materials newlineused in both the aerospace… (more)

Subjects/Keywords: Mechanical engineering; Metal Matrix Composites

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

T, R. (2014). Mechanical behaviour of Aluminium 6082 silicon carbide Particulate composites; -. (Thesis). Anna University. Retrieved from http://shodhganga.inflibnet.ac.in/handle/10603/26949

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

T, Raja. “Mechanical behaviour of Aluminium 6082 silicon carbide Particulate composites; -.” 2014. Thesis, Anna University. Accessed January 19, 2020. http://shodhganga.inflibnet.ac.in/handle/10603/26949.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

T, Raja. “Mechanical behaviour of Aluminium 6082 silicon carbide Particulate composites; -.” 2014. Web. 19 Jan 2020.

Vancouver:

T R. Mechanical behaviour of Aluminium 6082 silicon carbide Particulate composites; -. [Internet] [Thesis]. Anna University; 2014. [cited 2020 Jan 19]. Available from: http://shodhganga.inflibnet.ac.in/handle/10603/26949.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

T R. Mechanical behaviour of Aluminium 6082 silicon carbide Particulate composites; -. [Thesis]. Anna University; 2014. Available from: http://shodhganga.inflibnet.ac.in/handle/10603/26949

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Colorado School of Mines

4. Gonzales, Devon Scott. Development of metal matrix composite powder cored tubular wire for electron beam freeform fabrication.

Degree: MS(M.S.), Metallurgical and Materials Engineering, 2016, Colorado School of Mines

URL: http://hdl.handle.net/11124/170006

► Electron Beam Freeform Fabrication (EBF3) is a technique, developed at NASA Langley Research Center (NASA-LaRC), which uses a computerized numerical controlled electron beam welder and… (more)

▼ Electron Beam Freeform Fabrication (EBF3) is a technique, developed at NASA Langley Research Center (NASA-LaRC), which uses a computerized numerical controlled electron beam welder and a wire feed system to fabricate large scale aerospace parts. Advantages of using EBF3 as opposed to conventional manufacturing methods include decreased deign-to-product time, decreased wasted material, and the ability to adapt controls to produce geometrically complex parts. The EBF3 process is compatible with a range of aerospace alloys and material properties of parts produced by this process have been shown to be comparable to wrought products. However, to fully exploit the potential of the EBF3 process, development of materials tailored for the process is required. This research used alloy theory, as well as powder cored tubular wire technology, to develop aluminum based metal matrix composite feedstock for the EBF3 system. Five iterations of powder cored tubular wire were made using silicon carbide particulates with different surface conditions. Uncoated particles, as well as particles with high and low amounts of copper and nickel coatings, were incorporated into the powder core. Single and multiple layer deposits were made using each wire. Beam conditions were varied for each wire to determine the optimal combination of feedstock material and electron beam parameters required to create a uniformly distributed metal matrix composite deposit using EBF3. Completely uniform dispersion of the reinforcement particles was not achieved in the matrix, however, it was determined that nickel additions enhanced particle dispersion as well as mitigated solidification cracking and secondary carbide formation. It was also determined that using a lower energy beam also promotes dispersion and mitigates secondary carbide formation. Computational models were created to predict phase transformations and particle dispersion in the matrix for various conditions. The thermodynamic and fluid dynamic models were able to describe trends observed through characterization of EBF3 depositions. Results collected from characterization of the deposits as well as trends observed in the models can be used to plan future iterations of powder cored tubular wire feedstock, as well as deposition parameters, to create homogeneous metal matrix composite structures by Electron Beam Freeform Fabrication. Advisors/Committee Members: Liu, Stephen (advisor), Bourne, Gerald (committee member), Yu, Zhenzhen (committee member), Domack, Marcia S. (committee member), Hafley, Robert A. (committee member).

Subjects/Keywords: Additive Manufacturing; Metal matrix composites

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Gonzales, D. S. (2016). Development of metal matrix composite powder cored tubular wire for electron beam freeform fabrication. (Masters Thesis). Colorado School of Mines. Retrieved from http://hdl.handle.net/11124/170006

Chicago Manual of Style (16^th Edition):

Gonzales, Devon Scott. “Development of metal matrix composite powder cored tubular wire for electron beam freeform fabrication.” 2016. Masters Thesis, Colorado School of Mines. Accessed January 19, 2020. http://hdl.handle.net/11124/170006.

MLA Handbook (7^th Edition):

Gonzales, Devon Scott. “Development of metal matrix composite powder cored tubular wire for electron beam freeform fabrication.” 2016. Web. 19 Jan 2020.

Vancouver:

Gonzales DS. Development of metal matrix composite powder cored tubular wire for electron beam freeform fabrication. [Internet] [Masters thesis]. Colorado School of Mines; 2016. [cited 2020 Jan 19]. Available from: http://hdl.handle.net/11124/170006.

Council of Science Editors:

Gonzales DS. Development of metal matrix composite powder cored tubular wire for electron beam freeform fabrication. [Masters Thesis]. Colorado School of Mines; 2016. Available from: http://hdl.handle.net/11124/170006

Anna University

5. Maguteeswaran R. Optimization of lm25 aluminium Metal matrix composite parameters Reinforced with fe3o4 using nonconventional Machining process;.

Degree: Optimization of lm25 aluminium Metal matrix composite parameters Reinforced with fe3o4 using nonconventional Machining process, 2015, Anna University

URL: http://shodhganga.inflibnet.ac.in/handle/10603/38887

►

In recent years aluminium metal matrix composites AMMCs newlinehave emerged as promising high class materials The surface roughness newlineand wear properties are the basic material… (more)

Subjects/Keywords: Aluminium metal matrix composites; Electrical electronics and automotive; Metal matrix composites

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

R, M. (2015). Optimization of lm25 aluminium Metal matrix composite parameters Reinforced with fe3o4 using nonconventional Machining process;. (Thesis). Anna University. Retrieved from http://shodhganga.inflibnet.ac.in/handle/10603/38887

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

R, Maguteeswaran. “Optimization of lm25 aluminium Metal matrix composite parameters Reinforced with fe3o4 using nonconventional Machining process;.” 2015. Thesis, Anna University. Accessed January 19, 2020. http://shodhganga.inflibnet.ac.in/handle/10603/38887.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

R, Maguteeswaran. “Optimization of lm25 aluminium Metal matrix composite parameters Reinforced with fe3o4 using nonconventional Machining process;.” 2015. Web. 19 Jan 2020.

Vancouver:

R M. Optimization of lm25 aluminium Metal matrix composite parameters Reinforced with fe3o4 using nonconventional Machining process;. [Internet] [Thesis]. Anna University; 2015. [cited 2020 Jan 19]. Available from: http://shodhganga.inflibnet.ac.in/handle/10603/38887.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

R M. Optimization of lm25 aluminium Metal matrix composite parameters Reinforced with fe3o4 using nonconventional Machining process;. [Thesis]. Anna University; 2015. Available from: http://shodhganga.inflibnet.ac.in/handle/10603/38887

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Anna University

6. Suresh babu A. Experimental investigation and statistical analysis on mechanical properties of aluminium based metal matrix composites;.

Degree: Experimental investigation and statistical analysis on mechanical properties of aluminium based metal matrix composites, 2015, Anna University

URL: http://shodhganga.inflibnet.ac.in/handle/10603/41945

►

Metal Matrix Composites MMCs have been widely considered as newlinepossible substitutes for the traditional materials such as metals plastics newlineceramics etc used in structural applications… (more)

Subjects/Keywords: mechanical engineering; metal matrix composites; statistical analysis

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

A, S. b. (2015). Experimental investigation and statistical analysis on mechanical properties of aluminium based metal matrix composites;. (Thesis). Anna University. Retrieved from http://shodhganga.inflibnet.ac.in/handle/10603/41945

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

A, Suresh babu. “Experimental investigation and statistical analysis on mechanical properties of aluminium based metal matrix composites;.” 2015. Thesis, Anna University. Accessed January 19, 2020. http://shodhganga.inflibnet.ac.in/handle/10603/41945.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

A, Suresh babu. “Experimental investigation and statistical analysis on mechanical properties of aluminium based metal matrix composites;.” 2015. Web. 19 Jan 2020.

Vancouver:

A Sb. Experimental investigation and statistical analysis on mechanical properties of aluminium based metal matrix composites;. [Internet] [Thesis]. Anna University; 2015. [cited 2020 Jan 19]. Available from: http://shodhganga.inflibnet.ac.in/handle/10603/41945.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

A Sb. Experimental investigation and statistical analysis on mechanical properties of aluminium based metal matrix composites;. [Thesis]. Anna University; 2015. Available from: http://shodhganga.inflibnet.ac.in/handle/10603/41945

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

University of Ontario Institute of Technology

7. Ghandehariun, Amirmohammad. Mechanics of machining metal matrix composites: analytical modeling and finite element simulation.

Degree: 2015, University of Ontario Institute of Technology

URL: http://hdl.handle.net/10155/514

► Metal matrix composites (MMCs) are commonly utilized materials in various industries, including applications in aerospace and automotive industries, due to their outstanding strength-to-weight ratio and… (more)

Subjects/Keywords: Machining; Metal matrix composites; Finite element simulation

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Ghandehariun, A. (2015). Mechanics of machining metal matrix composites: analytical modeling and finite element simulation. (Thesis). University of Ontario Institute of Technology. Retrieved from http://hdl.handle.net/10155/514

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Ghandehariun, Amirmohammad. “Mechanics of machining metal matrix composites: analytical modeling and finite element simulation.” 2015. Thesis, University of Ontario Institute of Technology. Accessed January 19, 2020. http://hdl.handle.net/10155/514.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Ghandehariun, Amirmohammad. “Mechanics of machining metal matrix composites: analytical modeling and finite element simulation.” 2015. Web. 19 Jan 2020.

Vancouver:

Ghandehariun A. Mechanics of machining metal matrix composites: analytical modeling and finite element simulation. [Internet] [Thesis]. University of Ontario Institute of Technology; 2015. [cited 2020 Jan 19]. Available from: http://hdl.handle.net/10155/514.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Ghandehariun A. Mechanics of machining metal matrix composites: analytical modeling and finite element simulation. [Thesis]. University of Ontario Institute of Technology; 2015. Available from: http://hdl.handle.net/10155/514

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

University of Ontario Institute of Technology

8. Sikder, Snahungshu. Analytical model for force prediction when machining metal matrix composites.

Degree: 2010, University of Ontario Institute of Technology

URL: http://hdl.handle.net/10155/105

► Metal Matrix Composites (MMC) offer several thermo-mechanical advantages over standard materials and alloys which make them better candidates in different applications. Their light weight, high… (more)

Subjects/Keywords: Metal matrix composites; Machining; Cutting force

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Sikder, S. (2010). Analytical model for force prediction when machining metal matrix composites. (Thesis). University of Ontario Institute of Technology. Retrieved from http://hdl.handle.net/10155/105

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Sikder, Snahungshu. “Analytical model for force prediction when machining metal matrix composites.” 2010. Thesis, University of Ontario Institute of Technology. Accessed January 19, 2020. http://hdl.handle.net/10155/105.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Sikder, Snahungshu. “Analytical model for force prediction when machining metal matrix composites.” 2010. Web. 19 Jan 2020.

Vancouver:

Sikder S. Analytical model for force prediction when machining metal matrix composites. [Internet] [Thesis]. University of Ontario Institute of Technology; 2010. [cited 2020 Jan 19]. Available from: http://hdl.handle.net/10155/105.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Sikder S. Analytical model for force prediction when machining metal matrix composites. [Thesis]. University of Ontario Institute of Technology; 2010. Available from: http://hdl.handle.net/10155/105

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Anna University

9. Suresh V. Mechanical testing and machining Parameter analysis of lm25 Aluminium hybrid metal matrix Composites reinforced with boron Carbide b4c and graphite c;.

Degree: Mechanical testing and machining Parameter analysis of lm25 Aluminium hybrid metal matrix Composites reinforced with boron Carbide b4c and graphite c, 2015, Anna University

URL: http://shodhganga.inflibnet.ac.in/handle/10603/34533

►

In recent years Aluminium Metal Matrix Composites newline AMMCs have emerged as a promising high class of materials newlineThe surface roughness and wear properties are… (more)

Subjects/Keywords: Aluminium Metal Matrix Composites; Boron carbide

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

V, S. (2015). Mechanical testing and machining Parameter analysis of lm25 Aluminium hybrid metal matrix Composites reinforced with boron Carbide b4c and graphite c;. (Thesis). Anna University. Retrieved from http://shodhganga.inflibnet.ac.in/handle/10603/34533

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

V, Suresh. “Mechanical testing and machining Parameter analysis of lm25 Aluminium hybrid metal matrix Composites reinforced with boron Carbide b4c and graphite c;.” 2015. Thesis, Anna University. Accessed January 19, 2020. http://shodhganga.inflibnet.ac.in/handle/10603/34533.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

V, Suresh. “Mechanical testing and machining Parameter analysis of lm25 Aluminium hybrid metal matrix Composites reinforced with boron Carbide b4c and graphite c;.” 2015. Web. 19 Jan 2020.

Vancouver:

V S. Mechanical testing and machining Parameter analysis of lm25 Aluminium hybrid metal matrix Composites reinforced with boron Carbide b4c and graphite c;. [Internet] [Thesis]. Anna University; 2015. [cited 2020 Jan 19]. Available from: http://shodhganga.inflibnet.ac.in/handle/10603/34533.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

V S. Mechanical testing and machining Parameter analysis of lm25 Aluminium hybrid metal matrix Composites reinforced with boron Carbide b4c and graphite c;. [Thesis]. Anna University; 2015. Available from: http://shodhganga.inflibnet.ac.in/handle/10603/34533

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Anna University

10. Vijay S J. Investigations on al6061 tib2 in situ metal matrix composites production friction stir welding and characterization;.

Degree: Investigations on al6061 tib2 in situ metal matrix composites production friction stir welding and characterization, 2015, Anna University

URL: http://shodhganga.inflibnet.ac.in/handle/10603/39437

►

The modern industry has realized the importance of weight to strength ratio The available monolithic alloys do not meet the demand of these industries to… (more)

Subjects/Keywords: Low thermal expansion; Metal matrix composites

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

J, V. S. (2015). Investigations on al6061 tib2 in situ metal matrix composites production friction stir welding and characterization;. (Thesis). Anna University. Retrieved from http://shodhganga.inflibnet.ac.in/handle/10603/39437

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

J, Vijay S. “Investigations on al6061 tib2 in situ metal matrix composites production friction stir welding and characterization;.” 2015. Thesis, Anna University. Accessed January 19, 2020. http://shodhganga.inflibnet.ac.in/handle/10603/39437.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

J, Vijay S. “Investigations on al6061 tib2 in situ metal matrix composites production friction stir welding and characterization;.” 2015. Web. 19 Jan 2020.

Vancouver:

J VS. Investigations on al6061 tib2 in situ metal matrix composites production friction stir welding and characterization;. [Internet] [Thesis]. Anna University; 2015. [cited 2020 Jan 19]. Available from: http://shodhganga.inflibnet.ac.in/handle/10603/39437.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

J VS. Investigations on al6061 tib2 in situ metal matrix composites production friction stir welding and characterization;. [Thesis]. Anna University; 2015. Available from: http://shodhganga.inflibnet.ac.in/handle/10603/39437

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Anna University

11. Vijayakumar S. Fabrication of aluminium metal matrix composites and their wear behaviour;.

Degree: aluminium metal matrix composites and their wear, 2014, Anna University

URL: http://shodhganga.inflibnet.ac.in/handle/10603/26107

►

newline Discontinuous particle reinforced metal matrix composites have newlineattractive features like isotropic properties high specific strength specific newlinemodulus damping capacity good wear resistance compared to… (more)

Subjects/Keywords: aluminium metal; matrix composites; mechanical engineering

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

S, V. (2014). Fabrication of aluminium metal matrix composites and their wear behaviour;. (Thesis). Anna University. Retrieved from http://shodhganga.inflibnet.ac.in/handle/10603/26107

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

S, Vijayakumar. “Fabrication of aluminium metal matrix composites and their wear behaviour;.” 2014. Thesis, Anna University. Accessed January 19, 2020. http://shodhganga.inflibnet.ac.in/handle/10603/26107.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

S, Vijayakumar. “Fabrication of aluminium metal matrix composites and their wear behaviour;.” 2014. Web. 19 Jan 2020.

Vancouver:

S V. Fabrication of aluminium metal matrix composites and their wear behaviour;. [Internet] [Thesis]. Anna University; 2014. [cited 2020 Jan 19]. Available from: http://shodhganga.inflibnet.ac.in/handle/10603/26107.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

S V. Fabrication of aluminium metal matrix composites and their wear behaviour;. [Thesis]. Anna University; 2014. Available from: http://shodhganga.inflibnet.ac.in/handle/10603/26107

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

University of Waterloo

12. Sahraeinejad, Saman. Fabrication of Surface Metal Matrix Composites Using Friction Stir Processing.

Degree: 2014, University of Waterloo

URL: http://hdl.handle.net/10012/8829

► Friction stir processing has been employed to produce metal matrix composites by incorporating reinforcement particles in an Al 5059 matrix. Various particles with sizes from… (more)

Subjects/Keywords: Friction Stir Processing; Metal Matrix Composites; Fabrication

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Sahraeinejad, S. (2014). Fabrication of Surface Metal Matrix Composites Using Friction Stir Processing. (Thesis). University of Waterloo. Retrieved from http://hdl.handle.net/10012/8829

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Sahraeinejad, Saman. “Fabrication of Surface Metal Matrix Composites Using Friction Stir Processing.” 2014. Thesis, University of Waterloo. Accessed January 19, 2020. http://hdl.handle.net/10012/8829.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Sahraeinejad, Saman. “Fabrication of Surface Metal Matrix Composites Using Friction Stir Processing.” 2014. Web. 19 Jan 2020.

Vancouver:

Sahraeinejad S. Fabrication of Surface Metal Matrix Composites Using Friction Stir Processing. [Internet] [Thesis]. University of Waterloo; 2014. [cited 2020 Jan 19]. Available from: http://hdl.handle.net/10012/8829.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Sahraeinejad S. Fabrication of Surface Metal Matrix Composites Using Friction Stir Processing. [Thesis]. University of Waterloo; 2014. Available from: http://hdl.handle.net/10012/8829

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Anna University

13. Vijay Ananth S. Experimental and simulation analyses of superplastic forming of A16063/SiCp composites.

Degree: Mechanical Engineering, 2014, Anna University

URL: http://shodhganga.inflibnet.ac.in/handle/10603/17747

►

Superplasticity is the ability of a material to exhibit very long neck free elongation prior to its failure. If the percentage of elongation is more… (more)

▼

Superplasticity is the ability of a material to exhibit very long neck free elongation prior to its failure. If the percentage of elongation is more than 200% then the material has superplastic forming capability and if the percentage of elongation is less than 200% then it is referred as extended plasticity. The material having high strain rate sensitivity index has more elongation. The advantage of superplastic forming is that, near net shape components can be produced which reduces the cost and weight. Superplastic forming has applications in the field of aerospace, automobile, architecture industries and medical applications. In recent days the superplastic forming was done in aluminium metal matrix composites. Aluminum based particulate Metal Matrix Composites have combined properties of metallic and ceramic. The properties of Aluminium Metal Matrix composites are high specific strength and stiffness, low thermal expansion coefficient, improved tribological properties and better high temperature strength. The composites were prepared by stir casting process. Aluminium 6063 alloy, as matrix was used for production of Metal Matrix Composites and SiC particles as reinforcement. Composites were prepared with 5%, 8% and 10% volumetric percentages of SiC particles. To refine the grains, thermomechanical treatment was performed in the cast components. Thermomechanical treatment has Solutionizing, warm rolling and natural ageing processes. The cast composites were solution treated at a temperature of 520 C and water quenched. Quenched composites were warm rolled at a temperature of 400 C. The thickness was reduced from 5 mm to 2.5 mm. The components were naturally aged for three days. Equiaxed grains were formed through thermomechanical treatment and it improved the superplastic forming. After thermomechanical treatment, the SiC particles were distributed uniformly throughout the matrix material. The properties of the composites were tested by Tensile test and Hardness test.

References p. 164-173

Advisors/Committee Members: Kalaichelvan K.

Subjects/Keywords: Aluminium 6063 alloy; Aluminium Metal Matrix composites; Metal Matrix Composites; SiC particles; Superplastic

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

S, V. A. (2014). Experimental and simulation analyses of superplastic forming of A16063/SiCp composites. (Thesis). Anna University. Retrieved from http://shodhganga.inflibnet.ac.in/handle/10603/17747

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

S, Vijay Ananth. “Experimental and simulation analyses of superplastic forming of A16063/SiCp composites.” 2014. Thesis, Anna University. Accessed January 19, 2020. http://shodhganga.inflibnet.ac.in/handle/10603/17747.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

S, Vijay Ananth. “Experimental and simulation analyses of superplastic forming of A16063/SiCp composites.” 2014. Web. 19 Jan 2020.

Vancouver:

S VA. Experimental and simulation analyses of superplastic forming of A16063/SiCp composites. [Internet] [Thesis]. Anna University; 2014. [cited 2020 Jan 19]. Available from: http://shodhganga.inflibnet.ac.in/handle/10603/17747.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

S VA. Experimental and simulation analyses of superplastic forming of A16063/SiCp composites. [Thesis]. Anna University; 2014. Available from: http://shodhganga.inflibnet.ac.in/handle/10603/17747

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Anna University

14. Velmurugan, C. Experimental investigations on wear and machining characterisitics of aluminium hybrid composites;.

Degree: 2013, Anna University

URL: http://shodhganga.inflibnet.ac.in/handle/10603/11536

►

A composite is a combination of two or more dissimilar materials having a distinct interface between them such that the properties of the resulting material… (more)

▼

A composite is a combination of two or more dissimilar materials having a distinct interface between them such that the properties of the resulting material are superior to the individual consittutents. Among the different classes of composites, Metal Matrix Composites (MMCs) are widely used in many industries. Aluminium Matrix Composites (AMCs) refer to the class of light weight, high performance aluminium centric materials system. Most of the engineers often face the problem of selection of appropriate and optimum combination of input factors for achieving the required weight loss, tool wear rate, metal removal rate and surface roughness. Unit recently, trial and error methods were used to determine the optimum input factors for the required weight loss, tool wear rate, metal removal rate and surface roughness which results in wastage of cost and time. With a view to solve the above problems in metal matrix composites, an attempt was made to study the various aspects of composites such as regression and Artificial Neural Network modeling (ANN) of weight loss, regression modeling of metal removal rate, tool wear rate and surface roughness, micro structure, hardness and heat treatment. Wear tests were conducted using a pin)on)disc apparatus. Influencing factors such as weight percentage of SiC and graphite particles, applied load and sliding distance, which affecting the weight loss were identified. The machining characteristics were studied using an Electric Discharge Machine (EDM).The factors affecting metal removal rate, tool wear rate and surface roughness were identified. All the above analysis and results on wear properties, machining characteristics of hybrid composites can be very useful for the manufacturing industries for predicting weight loss and machining characteristics. The results from hardness, microstructure and heat treatment are also very useful for the composite parts manufacturing industries especially for automotive industries for making composite brake drum for cars. newline

None

Advisors/Committee Members: Subramanian, R..

Subjects/Keywords: Metal matrix composites; aluminium hybrid composites; aluminium matrix composites; artificial neural network; electric discharge machine

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Velmurugan, C. (2013). Experimental investigations on wear and machining characterisitics of aluminium hybrid composites;. (Thesis). Anna University. Retrieved from http://shodhganga.inflibnet.ac.in/handle/10603/11536

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Velmurugan, C. “Experimental investigations on wear and machining characterisitics of aluminium hybrid composites;.” 2013. Thesis, Anna University. Accessed January 19, 2020. http://shodhganga.inflibnet.ac.in/handle/10603/11536.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Velmurugan, C. “Experimental investigations on wear and machining characterisitics of aluminium hybrid composites;.” 2013. Web. 19 Jan 2020.

Vancouver:

Velmurugan C. Experimental investigations on wear and machining characterisitics of aluminium hybrid composites;. [Internet] [Thesis]. Anna University; 2013. [cited 2020 Jan 19]. Available from: http://shodhganga.inflibnet.ac.in/handle/10603/11536.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Velmurugan C. Experimental investigations on wear and machining characterisitics of aluminium hybrid composites;. [Thesis]. Anna University; 2013. Available from: http://shodhganga.inflibnet.ac.in/handle/10603/11536

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Indian Institute of Science

15. Sudarshan, *. Magnesium Matrix-Nano Ceramic Composites By In-situ Pyrolysis Of Organic Precursors In A Liquid Melt.

Degree: 2010, Indian Institute of Science

URL: http://hdl.handle.net/2005/2066

► In this thesis, a novel in-situ method for incorporating nanoscale ceramic particles into metal has been developed. The ceramic phase is introduced as an organic-polymer… (more)

▼ In this thesis, a novel in-situ method for incorporating nanoscale ceramic particles into metal has been developed. The ceramic phase is introduced as an organic-polymer precursor that pyrolyzes in-situ to produce a ceramic phase within the metal melt. The environment used to shield the melt from burning also protects the organic precursor from oxidation. The evolution of volatiles (predominantly hydrogen) as well as the mechanical stirring causes the polymer particles to fragment into nanoscale dispersions of a ceramic phase. These “Polymer-based In-situ Process-Metal Matrix Composites” (PIP-MMCs) are likely to have great generality, because many different kinds of organic precursors are commercially available, for producing oxides, carbides, nitrides, and borides. Also, the process would permit the addition of large volume fractions of a ceramic phase, enabling nanostructural design, and production of MMCs with a wide range of mechanical properties, meant especially for high temperature applications. An important and noteworthy feature of the present process, which distinguishes it from other methods, is that all the constituents of the ceramic phase are built into the organic molecules of the precursor (e.g., polysilazanes contain silicon, carbon, and nitrogen); therefore, a reaction between the polymer and the host metal is not required to produce the dispersion of the refractory phase. The polymer precursor powder, with a mean particle size of 31.5 µm, was added equivalent to 5 and 10 weight % of the melt (pure magnesium) by a liquid metal stir-casting technique. SEM and OM microstructural observations show that in the cast structure the pyrolysis products are present in the dendrite boundary region in the form of rod/platelets having a thickness of 100 to 200 nm. After extrusion the particles are broken down into fine particles, having a size that is comparable to the thickness of the platelets, in the 100 to 200 nm range, and are distributed more uniformly. In addition, limited TEM studies revealed the formation of even finer particles of 10-50 nm. X-ray diffraction analysis shows the presence of a small quantity of an intermetallic phase (Mg2Si) in the matrix, which is unintended in this process. There was a significant improvement in mechanical properties of the PIP-MMCs compared to the pure Mg. These composites showed higher macro-and micro-hardness. The composite exhibited better compressive strength at both room temperature and at elevated temperatures. The increase in the density of PIP-composites is less than 1% of Mg. Five weight percent of the precursor produced a two-fold increase in the room-temperature yield strength and reduced the steady state creep rate at 723 K by one to two orders of magnitude. PIP-MMCs showed higher damping capacity and modulus compared to pure Mg, with the damping capacity increasing by about 1.6 times and the dynamic modulus by 11%-16%. PIP-composites showed an increase in the sliding wear resistance by more than 25% compared to pure Mg. Advisors/Committee Members: Surappa, M K.

Subjects/Keywords: Ceramic Composites; Magnesium Ceramic Composites; Liquid Melt Composites; Organic Polymer Precursors; In-situ Pyrolysis; Metal Matrix Composites (MMCs); Magnesium Matrix-Nano Ceramic Composites; Magnesium Matrix Composites - Fabrication; Nano-composites; Nano Materials; Nanoceramic Metal Matrix Composites; Melt-ceramic Nano-composites; Materials Science

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Sudarshan, *. (2010). Magnesium Matrix-Nano Ceramic Composites By In-situ Pyrolysis Of Organic Precursors In A Liquid Melt. (Thesis). Indian Institute of Science. Retrieved from http://hdl.handle.net/2005/2066

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Sudarshan, *. “Magnesium Matrix-Nano Ceramic Composites By In-situ Pyrolysis Of Organic Precursors In A Liquid Melt.” 2010. Thesis, Indian Institute of Science. Accessed January 19, 2020. http://hdl.handle.net/2005/2066.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Sudarshan, *. “Magnesium Matrix-Nano Ceramic Composites By In-situ Pyrolysis Of Organic Precursors In A Liquid Melt.” 2010. Web. 19 Jan 2020.

Vancouver:

Sudarshan *. Magnesium Matrix-Nano Ceramic Composites By In-situ Pyrolysis Of Organic Precursors In A Liquid Melt. [Internet] [Thesis]. Indian Institute of Science; 2010. [cited 2020 Jan 19]. Available from: http://hdl.handle.net/2005/2066.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Sudarshan *. Magnesium Matrix-Nano Ceramic Composites By In-situ Pyrolysis Of Organic Precursors In A Liquid Melt. [Thesis]. Indian Institute of Science; 2010. Available from: http://hdl.handle.net/2005/2066

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Indian Institute of Science

16. Sudarshan, *. Magnesium Matrix-Nano Ceramic Composites By In-situ Pyrolysis Of Organic Precursors In A Liquid Melt.

Degree: 2010, Indian Institute of Science

URL: http://etd.iisc.ernet.in/handle/2005/2066 ; http://etd.ncsi.iisc.ernet.in/abstracts/2669/G24456-Abs.pdf

► In this thesis, a novel in-situ method for incorporating nanoscale ceramic particles into metal has been developed. The ceramic phase is introduced as an organic-polymer… (more)

▼ In this thesis, a novel in-situ method for incorporating nanoscale ceramic particles into metal has been developed. The ceramic phase is introduced as an organic-polymer precursor that pyrolyzes in-situ to produce a ceramic phase within the metal melt. The environment used to shield the melt from burning also protects the organic precursor from oxidation. The evolution of volatiles (predominantly hydrogen) as well as the mechanical stirring causes the polymer particles to fragment into nanoscale dispersions of a ceramic phase. These “Polymer-based In-situ Process-Metal Matrix Composites” (PIP-MMCs) are likely to have great generality, because many different kinds of organic precursors are commercially available, for producing oxides, carbides, nitrides, and borides. Also, the process would permit the addition of large volume fractions of a ceramic phase, enabling nanostructural design, and production of MMCs with a wide range of mechanical properties, meant especially for high temperature applications. An important and noteworthy feature of the present process, which distinguishes it from other methods, is that all the constituents of the ceramic phase are built into the organic molecules of the precursor (e.g., polysilazanes contain silicon, carbon, and nitrogen); therefore, a reaction between the polymer and the host metal is not required to produce the dispersion of the refractory phase. The polymer precursor powder, with a mean particle size of 31.5 µm, was added equivalent to 5 and 10 weight % of the melt (pure magnesium) by a liquid metal stir-casting technique. SEM and OM microstructural observations show that in the cast structure the pyrolysis products are present in the dendrite boundary region in the form of rod/platelets having a thickness of 100 to 200 nm. After extrusion the particles are broken down into fine particles, having a size that is comparable to the thickness of the platelets, in the 100 to 200 nm range, and are distributed more uniformly. In addition, limited TEM studies revealed the formation of even finer particles of 10-50 nm. X-ray diffraction analysis shows the presence of a small quantity of an intermetallic phase (Mg2Si) in the matrix, which is unintended in this process. There was a significant improvement in mechanical properties of the PIP-MMCs compared to the pure Mg. These composites showed higher macro-and micro-hardness. The composite exhibited better compressive strength at both room temperature and at elevated temperatures. The increase in the density of PIP-composites is less than 1% of Mg. Five weight percent of the precursor produced a two-fold increase in the room-temperature yield strength and reduced the steady state creep rate at 723 K by one to two orders of magnitude. PIP-MMCs showed higher damping capacity and modulus compared to pure Mg, with the damping capacity increasing by about 1.6 times and the dynamic modulus by 11%-16%. PIP-composites showed an increase in the sliding wear resistance by more than 25% compared to pure Mg. Advisors/Committee Members: Surappa, M K.

Subjects/Keywords: Ceramic Composites; Magnesium Ceramic Composites; Liquid Melt Composites; Organic Polymer Precursors; In-situ Pyrolysis; Metal Matrix Composites (MMCs); Magnesium Matrix-Nano Ceramic Composites; Magnesium Matrix Composites - Fabrication; Nano-composites; Nano Materials; Nanoceramic Metal Matrix Composites; Melt-ceramic Nano-composites; Materials Science

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Sudarshan, *. (2010). Magnesium Matrix-Nano Ceramic Composites By In-situ Pyrolysis Of Organic Precursors In A Liquid Melt. (Thesis). Indian Institute of Science. Retrieved from http://etd.iisc.ernet.in/handle/2005/2066 ; http://etd.ncsi.iisc.ernet.in/abstracts/2669/G24456-Abs.pdf

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Sudarshan, *. “Magnesium Matrix-Nano Ceramic Composites By In-situ Pyrolysis Of Organic Precursors In A Liquid Melt.” 2010. Thesis, Indian Institute of Science. Accessed January 19, 2020. http://etd.iisc.ernet.in/handle/2005/2066 ; http://etd.ncsi.iisc.ernet.in/abstracts/2669/G24456-Abs.pdf.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Sudarshan, *. “Magnesium Matrix-Nano Ceramic Composites By In-situ Pyrolysis Of Organic Precursors In A Liquid Melt.” 2010. Web. 19 Jan 2020.

Vancouver:

Sudarshan *. Magnesium Matrix-Nano Ceramic Composites By In-situ Pyrolysis Of Organic Precursors In A Liquid Melt. [Internet] [Thesis]. Indian Institute of Science; 2010. [cited 2020 Jan 19]. Available from: http://etd.iisc.ernet.in/handle/2005/2066 ; http://etd.ncsi.iisc.ernet.in/abstracts/2669/G24456-Abs.pdf.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Sudarshan *. Magnesium Matrix-Nano Ceramic Composites By In-situ Pyrolysis Of Organic Precursors In A Liquid Melt. [Thesis]. Indian Institute of Science; 2010. Available from: http://etd.iisc.ernet.in/handle/2005/2066 ; http://etd.ncsi.iisc.ernet.in/abstracts/2669/G24456-Abs.pdf

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Indian Institute of Science

17. Kumar, Ajay. In-Situ Polymer Derived Nano Particle Metal Matrix Composites Developed by Friction Stir Processing.

Degree: 2015, Indian Institute of Science

URL: http://etd.iisc.ernet.in/2005/3937 ; http://etd.iisc.ernet.in/abstracts/4819/G27216-Abs.pdf

► Ceramic metal matrix composites (CMMCs) are materials generally created by mixing of hard ceramic particles in a metal matrix. They were expected to combine the… (more)

▼ Ceramic metal matrix composites (CMMCs) are materials generally created by mixing of hard ceramic particles in a metal matrix. They were expected to combine the ductility and toughness of the metal with the high strength and elastic modulus of the ceramic. MMCs have potential applications in automotive, aeronautical and aerospace industries. Hence, a simple and economical method for fabricating MMCs is an area of intense research. In MMCs, damage evolution starts preferentially at particle matrix interface or at particle clusters in the matrix. This is due to the different physical and mechanical properties of the particle and matrix. Higher local particle volume content leads to higher stress triaxiality making it a preferential site for damage nucleation. Problems with lowering of ductility, fatigue, fracture and impact resistance, agglomeration of ceramic phase and issues related to the predictability of properties of MMCs have been the major issues that have limited their use. In order to overcome some of these shortcomings, the use of nano particles has been attracting increasing attention. The reason is their capability in improving the mechanical and physical properties of traditional MMCs. The dispersion of a nanoscale ceramic phase is needed in order to overcome the problems related to fatigue, fracture toughness, and creep behaviour at high temperatures. However, manufacturing costs, preparation of nano composites and environmental concerns have to be addressed. Agglomeration of nano particles, when produced by the melt stir casting route, the primary route to produce MMCs, is a serious issue that limits the use of nano-particles to produce MMCs with good properties. To avoid agglomeration of the ceramic phase MMCs/nano MMCs have been produced through the powder metallurgy route. Agglomeration is avoided as this is a solid state process. Secondary processing, such as extrusion and rolling are often needed to fully consolidate materials produced in this manner. A high extrusion ratio is often required to get MMCs without porosity. A new method of making nano-ceramic MMC using a polymer derived ceramics (PDC) has been reported. A polymer derived ceramic is a material that converts itself into a ceramic when heated above a particular temperature. In the PDC method a polymer precursor is dispersed in the metal and then converted in-situ to a ceramic phase. A feature of this process is that all the constituents of the ceramic phase are built into the organic molecules of the precursor (e.g., polysilazanes contain silicon, carbon, and nitrogen); therefore, a reaction between the polymer and the host metal or air is not required to produce the ceramic phase. The polymer can be introduced through casting or powder metallurgy route. In the casting route, the polymer powder is directly added to molten metal and pyrolyzed in-situ to create castings of metal-matrix composites. These composites have shown better properties at elevated temperatures but the problem of agglomeration of particles due to Van der Waal's… Advisors/Committee Members: Kailas, Satish V.

Subjects/Keywords: Friction Stir Processing (FSP); In-Situ Composites; Nano-Metal Matrix Composites; Ceramic Metal Matrix Composites (CMMCs); Composite Materials; Polymer Derived Ceramics (PDCs); Polymer Derived Nanoceramic Metal Matrix Composites; Metal Matrix Composites; Friction Stir Welding; Cu-PDC Composite; NAB-PDC Composite; Mechanical Engineering

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Kumar, A. (2015). In-Situ Polymer Derived Nano Particle Metal Matrix Composites Developed by Friction Stir Processing. (Thesis). Indian Institute of Science. Retrieved from http://etd.iisc.ernet.in/2005/3937 ; http://etd.iisc.ernet.in/abstracts/4819/G27216-Abs.pdf

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Kumar, Ajay. “In-Situ Polymer Derived Nano Particle Metal Matrix Composites Developed by Friction Stir Processing.” 2015. Thesis, Indian Institute of Science. Accessed January 19, 2020. http://etd.iisc.ernet.in/2005/3937 ; http://etd.iisc.ernet.in/abstracts/4819/G27216-Abs.pdf.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Kumar, Ajay. “In-Situ Polymer Derived Nano Particle Metal Matrix Composites Developed by Friction Stir Processing.” 2015. Web. 19 Jan 2020.

Vancouver:

Kumar A. In-Situ Polymer Derived Nano Particle Metal Matrix Composites Developed by Friction Stir Processing. [Internet] [Thesis]. Indian Institute of Science; 2015. [cited 2020 Jan 19]. Available from: http://etd.iisc.ernet.in/2005/3937 ; http://etd.iisc.ernet.in/abstracts/4819/G27216-Abs.pdf.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Kumar A. In-Situ Polymer Derived Nano Particle Metal Matrix Composites Developed by Friction Stir Processing. [Thesis]. Indian Institute of Science; 2015. Available from: http://etd.iisc.ernet.in/2005/3937 ; http://etd.iisc.ernet.in/abstracts/4819/G27216-Abs.pdf

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brunel University

18. Li, Z. Mg/hydroxyapatite composites for potential biomedical applications.

Degree: PhD, 2010, Brunel University

URL: http://bura.brunel.ac.uk/handle/2438/4599 ; http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.557732

► Depending on an excellent combination of high mechanical property and fracture toughness, metallic biomaterials have been widely accepted for clinical application of bone fixation. However,… (more)

Subjects/Keywords: 610.28; Solidification; Casting; Metal matrix composites; Bio-degradable Mg alloys/composites; Magnesium alloys

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Li, Z. (2010). Mg/hydroxyapatite composites for potential biomedical applications. (Doctoral Dissertation). Brunel University. Retrieved from http://bura.brunel.ac.uk/handle/2438/4599 ; http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.557732

Chicago Manual of Style (16^th Edition):

Li, Z. “Mg/hydroxyapatite composites for potential biomedical applications.” 2010. Doctoral Dissertation, Brunel University. Accessed January 19, 2020. http://bura.brunel.ac.uk/handle/2438/4599 ; http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.557732.

MLA Handbook (7^th Edition):

Li, Z. “Mg/hydroxyapatite composites for potential biomedical applications.” 2010. Web. 19 Jan 2020.

Vancouver:

Li Z. Mg/hydroxyapatite composites for potential biomedical applications. [Internet] [Doctoral dissertation]. Brunel University; 2010. [cited 2020 Jan 19]. Available from: http://bura.brunel.ac.uk/handle/2438/4599 ; http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.557732.

Council of Science Editors:

Li Z. Mg/hydroxyapatite composites for potential biomedical applications. [Doctoral Dissertation]. Brunel University; 2010. Available from: http://bura.brunel.ac.uk/handle/2438/4599 ; http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.557732

19. Kivikytö-Reponen, Päivi. Correlation of Material Characteristics and Wear of Powder Metallurgical Metal Matrix Composites.

Degree: 2007, Helsinki University of Technology

URL: http://lib.tkk.fi/Diss/2006/isbn9512284790/

►

The wear of materials is a major and widely recognised industrial problem. The direct costs of wear failures, i.e., wear part failures and replacements, increased… (more)

▼

The wear of materials is a major and widely recognised industrial problem. The direct costs of wear failures, i.e., wear part failures and replacements, increased work and time, loss of productivity, as well as indirect losses of energy and the increased environmental burden, are real problems in everyday work and business. In this study, the materials of interest are wear-resistant powder metallurgical metal matrix composites, MMCs. Powder metallurgical, P/M, production of material, involving, for example, hot isostatic pressing (HIPing), offers considerable potential for enhanced wear resistance because it has a larger capacity to modify microstructures than conventional production technologies. Martensitic- and tool-steel-based composites were studied with reference to the needs of the mineral industry, while the wear of austenitic- or duplex-steel-based composites was evaluated with reference to those of the energy industry. The wear was studied both in functional wear tests involving a small-scale cone crusher, as well as in laboratory tests, such as the dry sand rubber wheel and erofuge tests. The correlation between the wear behaviour and the material-related parameters of the steel-based metal matrix composites was investigated. The material-related parameters were microstructural parameters, such as the volume fraction of the reinforcements and hard particles, the size of the reinforcements, the true carbide size of the hard particles and spacing between the reinforcement particles. These parameters are evaluated by varying the matrix material of the composite and by varying the reinforcements in the fixed matrix material. The significantly important parameters that have an effect on the material wear rate were identified. The most important reinforcement-related parameters in these wear environments were the total volume fraction of the hard phase, the spacing between hard particles and the type of the hard phase.

Helsinki University of Technology doctoral theses in materials and earth sciences, ISSN 1795-0074; 5

Advisors/Committee Members: Helsinki University of Technology, Department of Materials Science and Engineering, Laboratory of Materials Science.

Subjects/Keywords: abrasive wear; cone crusher; wear resistant materials; metal matrix composites

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Kivikytö-Reponen, P. (2007). Correlation of Material Characteristics and Wear of Powder Metallurgical Metal Matrix Composites. (Thesis). Helsinki University of Technology. Retrieved from http://lib.tkk.fi/Diss/2006/isbn9512284790/

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Kivikytö-Reponen, Päivi. “Correlation of Material Characteristics and Wear of Powder Metallurgical Metal Matrix Composites.” 2007. Thesis, Helsinki University of Technology. Accessed January 19, 2020. http://lib.tkk.fi/Diss/2006/isbn9512284790/.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Kivikytö-Reponen, Päivi. “Correlation of Material Characteristics and Wear of Powder Metallurgical Metal Matrix Composites.” 2007. Web. 19 Jan 2020.

Vancouver:

Kivikytö-Reponen P. Correlation of Material Characteristics and Wear of Powder Metallurgical Metal Matrix Composites. [Internet] [Thesis]. Helsinki University of Technology; 2007. [cited 2020 Jan 19]. Available from: http://lib.tkk.fi/Diss/2006/isbn9512284790/.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Kivikytö-Reponen P. Correlation of Material Characteristics and Wear of Powder Metallurgical Metal Matrix Composites. [Thesis]. Helsinki University of Technology; 2007. Available from: http://lib.tkk.fi/Diss/2006/isbn9512284790/

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

University of Surrey

20. Stone, Ian C. The characterisation of the spatial distribution of reinforcement in powder metallurgy route Al/SiCp MMCs and its effect on their processing and properties.

Degree: 1994, University of Surrey

URL: http://epubs.surrey.ac.uk/804376/ ; http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.259487

Subjects/Keywords: 669; Metal matrix composites

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Stone, I. C. (1994). The characterisation of the spatial distribution of reinforcement in powder metallurgy route Al/SiCp MMCs and its effect on their processing and properties. (Doctoral Dissertation). University of Surrey. Retrieved from http://epubs.surrey.ac.uk/804376/ ; http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.259487

Chicago Manual of Style (16^th Edition):

Stone, Ian C. “The characterisation of the spatial distribution of reinforcement in powder metallurgy route Al/SiCp MMCs and its effect on their processing and properties.” 1994. Doctoral Dissertation, University of Surrey. Accessed January 19, 2020. http://epubs.surrey.ac.uk/804376/ ; http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.259487.

MLA Handbook (7^th Edition):

Stone, Ian C. “The characterisation of the spatial distribution of reinforcement in powder metallurgy route Al/SiCp MMCs and its effect on their processing and properties.” 1994. Web. 19 Jan 2020.

Vancouver:

Stone IC. The characterisation of the spatial distribution of reinforcement in powder metallurgy route Al/SiCp MMCs and its effect on their processing and properties. [Internet] [Doctoral dissertation]. University of Surrey; 1994. [cited 2020 Jan 19]. Available from: http://epubs.surrey.ac.uk/804376/ ; http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.259487.

Council of Science Editors:

Stone IC. The characterisation of the spatial distribution of reinforcement in powder metallurgy route Al/SiCp MMCs and its effect on their processing and properties. [Doctoral Dissertation]. University of Surrey; 1994. Available from: http://epubs.surrey.ac.uk/804376/ ; http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.259487

University of Alberta

21. Salimi, Sahar. Fabrication and properties of aluminum-carbon nanotube accumulative roll bonded composites.

Degree: MS, Department of Chemical and Materials Engineering, 2011, University of Alberta

URL: https://era.library.ualberta.ca/files/v118rf157

► Accumulative roll bonding was adapted to fabricate a carbon nanotube reinforced aluminum matrix composite. The microstructure was investigated by transmission electron microscopy, and it was… (more)

Subjects/Keywords: Metal matrix composites; Accumulative roll bonding; Carbon nanotubes

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Salimi, S. (2011). Fabrication and properties of aluminum-carbon nanotube accumulative roll bonded composites. (Masters Thesis). University of Alberta. Retrieved from https://era.library.ualberta.ca/files/v118rf157

Chicago Manual of Style (16^th Edition):

Salimi, Sahar. “Fabrication and properties of aluminum-carbon nanotube accumulative roll bonded composites.” 2011. Masters Thesis, University of Alberta. Accessed January 19, 2020. https://era.library.ualberta.ca/files/v118rf157.

MLA Handbook (7^th Edition):

Salimi, Sahar. “Fabrication and properties of aluminum-carbon nanotube accumulative roll bonded composites.” 2011. Web. 19 Jan 2020.

Vancouver:

Salimi S. Fabrication and properties of aluminum-carbon nanotube accumulative roll bonded composites. [Internet] [Masters thesis]. University of Alberta; 2011. [cited 2020 Jan 19]. Available from: https://era.library.ualberta.ca/files/v118rf157.

Council of Science Editors:

Salimi S. Fabrication and properties of aluminum-carbon nanotube accumulative roll bonded composites. [Masters Thesis]. University of Alberta; 2011. Available from: https://era.library.ualberta.ca/files/v118rf157

Texas A&M University

22. Velamati, Manasa. Micro Joining of Aluminum Graphite Composites.

Degree: 2012, Texas A&M University

URL: http://hdl.handle.net/1969.1/ETD-TAMU-2011-05-9375

► Advanced aluminum graphite composites have unique thermal properties due to opposing coefficients of thermal expansion of aluminum and graphite. The thermal and mechanical properties of… (more)

Subjects/Keywords: Metal matrix composites; aluminum; graphite; welding; brazing; joining

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Velamati, M. (2012). Micro Joining of Aluminum Graphite Composites. (Thesis). Texas A&M University. Retrieved from http://hdl.handle.net/1969.1/ETD-TAMU-2011-05-9375

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Velamati, Manasa. “Micro Joining of Aluminum Graphite Composites.” 2012. Thesis, Texas A&M University. Accessed January 19, 2020. http://hdl.handle.net/1969.1/ETD-TAMU-2011-05-9375.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Velamati, Manasa. “Micro Joining of Aluminum Graphite Composites.” 2012. Web. 19 Jan 2020.

Vancouver:

Velamati M. Micro Joining of Aluminum Graphite Composites. [Internet] [Thesis]. Texas A&M University; 2012. [cited 2020 Jan 19]. Available from: http://hdl.handle.net/1969.1/ETD-TAMU-2011-05-9375.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Velamati M. Micro Joining of Aluminum Graphite Composites. [Thesis]. Texas A&M University; 2012. Available from: http://hdl.handle.net/1969.1/ETD-TAMU-2011-05-9375

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

University of Hong Kong

23. Tang, Yuanyuan. Mechanisms of thermally stabilizing copper and zinc waste in ceramic matrix.

Degree: PhD, 2012, University of Hong Kong

URL: Tang, Y. [唐圆圆]. (2012). Mechanisms of thermally stabilizing copper and zinc waste in ceramic matrix. (Thesis). University of Hong Kong, Pokfulam, Hong Kong SAR. Retrieved from http://dx.doi.org/10.5353/th_b4832964 ; http://dx.doi.org/10.5353/th_b4832964 ; http://hdl.handle.net/10722/173908

► This study proposed and evaluated a waste-to-resource strategy for beneficially using solid waste as ceramic raw materials. The sludge generated from waterworks and sewage treatment… (more)

▼ This study proposed and evaluated a waste-to-resource strategy for beneficially using solid waste as ceramic raw materials. The sludge generated from waterworks and sewage treatment processes contains significant amounts of aluminum and iron, and the industrial sludge is enriched with high metal content. The hazardous metals in waste sludge may lead to metal bioaccumulation and cause adverse effects for ecosystem. This study aims to stabilize copper- and zinc-laden sludge in commonly available ceramic products, and to beneficially use waterworks and sewage sludge to incorporate waste metals. The study was first investigated by sintering simulated metal-laden sludge with Al-rich (γ-Al2O3, -Al2O3, kaolinite, mullite) and Fe-rich (Fe2O3) precursors. Secondly, the practicability of recycling Cu-bearing electroplating sludge as a part of ceramic raw materials was evaluated through thermal interaction with Al-rich precursors. Furthermore, the potential of using water and sewage treatment works sludge to stabilize metals were also examined. Sintering procedures were carried out within 650-1450 °C for 3 h, and phase transformations were studied using X-ray diffraction (XRD) with the quantification technique of Rietveld refinement analysis. The formation of CuAl2O4 spinel was initiated at 650 °C using γ-Al2O3, and the maximum copper transformation reached 80%. The copper incorporation into CuAl2O4 started at 850 °C and reached 95% in -Al2O3 system. The growth of CuAl2O4 was found at 750 °C using kaolinite, but at 900 °C in mullite system. The maximum copper transformation for both kaolinite and mullite reached ~80%. With CuAl2O4, decomposing, the formation of CuAlO2 predominated in alumina systems, but CuO and Cu2O were found in kaolinite and mullite systems. When using Fe2O3, the CuFe2O4 with tetragonal structure was observed at lower temperatures, and the cubic CuFe2O4 became predominant at 1000 °C. The formation of ZnAl2O4 spinel started at 750 °C in γ-Al2O3 system and at 950 °C in -Al2O3 system, respectively. The zinc transformation completed in both γ-Al2O3 and -Al2O3 systems at higher temperatures. The coexistence and competition between ZnAl2O4 and Zn2SiO4 were found using kaolinite and mullite. The increase of temperature to 1350 °C resulted in complete zinc transformation to ZnAl2O4 in mullite system. Through leaching tests, aluminates and ferrites were found to be superior to oxide and silicate phases in immobilizing hazardous metals. The leachates of aluminates and ferrites exhibited the behavior of incongruent dissolution, and the Zn2SiO4 leachate showed congruent dissolution. The CuAl2O4 spinel was observed when sintering Cu-laden electroplating sludge with aluminate precursors. The copper leachability decreased with CuAl2O4 developing and the lowest copper concentration in leachates was within the optimal temperature range for CuAl2O4 generation. Both copper and zinc were successfully incorporated into the spinel structure using waterworks sludge, and the cubic CuFe2O4 became the main component when using… Advisors/Committee Members: Shih, K.

Subjects/Keywords: Ceramic-matrix composites.; Hazardous wastes - Stabilization.; Metal wastes.

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Tang, Y. (2012). Mechanisms of thermally stabilizing copper and zinc waste in ceramic matrix. (Doctoral Dissertation). University of Hong Kong. Retrieved from Tang, Y. [唐圆圆]. (2012). Mechanisms of thermally stabilizing copper and zinc waste in ceramic matrix. (Thesis). University of Hong Kong, Pokfulam, Hong Kong SAR. Retrieved from http://dx.doi.org/10.5353/th_b4832964 ; http://dx.doi.org/10.5353/th_b4832964 ; http://hdl.handle.net/10722/173908

Chicago Manual of Style (16^th Edition):

Tang, Yuanyuan. “Mechanisms of thermally stabilizing copper and zinc waste in ceramic matrix.” 2012. Doctoral Dissertation, University of Hong Kong. Accessed January 19, 2020. Tang, Y. [唐圆圆]. (2012). Mechanisms of thermally stabilizing copper and zinc waste in ceramic matrix. (Thesis). University of Hong Kong, Pokfulam, Hong Kong SAR. Retrieved from http://dx.doi.org/10.5353/th_b4832964 ; http://dx.doi.org/10.5353/th_b4832964 ; http://hdl.handle.net/10722/173908.

MLA Handbook (7^th Edition):

Tang, Yuanyuan. “Mechanisms of thermally stabilizing copper and zinc waste in ceramic matrix.” 2012. Web. 19 Jan 2020.

Vancouver:

Tang Y. Mechanisms of thermally stabilizing copper and zinc waste in ceramic matrix. [Internet] [Doctoral dissertation]. University of Hong Kong; 2012. [cited 2020 Jan 19]. Available from: Tang, Y. [唐圆圆]. (2012). Mechanisms of thermally stabilizing copper and zinc waste in ceramic matrix. (Thesis). University of Hong Kong, Pokfulam, Hong Kong SAR. Retrieved from http://dx.doi.org/10.5353/th_b4832964 ; http://dx.doi.org/10.5353/th_b4832964 ; http://hdl.handle.net/10722/173908.

Council of Science Editors:

Tang Y. Mechanisms of thermally stabilizing copper and zinc waste in ceramic matrix. [Doctoral Dissertation]. University of Hong Kong; 2012. Available from: Tang, Y. [唐圆圆]. (2012). Mechanisms of thermally stabilizing copper and zinc waste in ceramic matrix. (Thesis). University of Hong Kong, Pokfulam, Hong Kong SAR. Retrieved from http://dx.doi.org/10.5353/th_b4832964 ; http://dx.doi.org/10.5353/th_b4832964 ; http://hdl.handle.net/10722/173908

24. Periyasamy P. Studies on effect of friction stir welding process parameters on weld quality of al sicp metal matrix composites;.

Degree: Friction stir welding process parameters on weld quality of Al/SiCp metal matrix composites, 2014, Anna University

URL: http://shodhganga.inflibnet.ac.in/handle/10603/17305

►

Aluminium based Metal Matrix Composites (MMCs) have very newlinegood mechanical properties, such as higher strength, higher hardness, and newlinehigher wear resistance, but their applications in… (more)

▼

Aluminium based Metal Matrix Composites (MMCs) have very newlinegood mechanical properties, such as higher strength, higher hardness, and newlinehigher wear resistance, but their applications in industries are restricted newlinemainly due to the non-availability of suitable welding techniques. The main newlinedifficulty in the fusion welding of Al/SiCp Metal Matrix Composites (MMCs) newlineis the occurrence of segregation and deleterious reactions, between the newlinereinforced particles and liquid aluminum in the fusion zone. However, the newlinefriction stir welding process (FSW) is a suitable process to join the materials. Friction stir welding (FSW) is an emerging solid state joining newlineprocess, in which the material that is being welded does not melt and recast. newlineHowever, FSW joints are prone to defects like pin hole, tunnel defect, piping newlinedefect, kissing bond, cracks etc., due to the improper flow of the metal and its newlineinsufficient consolidation in the weld nugget region. The published literature newlinefocusing on the effect of FSW process parameters, on the formation of defect newlinefree weld nugget zone in aluminium based MMCs is very limited. Hence, the newlinepresent investigation was carried out to study the effect of the FSW process newlineparameters on the formation of a defect free weld nugget zone, as well as on newlinethe tensile properties of the welded joints of Al/SiCp MMCs. In this investigation, an attempt was made to study the effect of the newlineheat input on the evolution of the microstructure in the weld region of the newlinefriction stir welded aluminum alloy. AA6061-10% SiCp and AA6061-20% newlineSiCp MMCs were used as the base materials. A square butt joint newlineconfiguration from rolled plates of 6 mm thickness was prepared to fabricate newlinethe FSW joints. Non-consumable tools made of high speed steel were used to newlinefabricate the joints. Nearly 105 joints were fabricated to study the effect of the newlineFSW process parameters, such as the tool rotational speed, welding speed and newlineaxial force on the tensile properties of the friction stir welded MMCs. newline

References p.203-216.

Advisors/Committee Members: Mohan B.

Subjects/Keywords: Al/SiCp; Friction stir welding; Mechanical Engineering; Metal Matrix Composites

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

P, P. (2014). Studies on effect of friction stir welding process parameters on weld quality of al sicp metal matrix composites;. (Thesis). Anna University. Retrieved from http://shodhganga.inflibnet.ac.in/handle/10603/17305

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

P, Periyasamy. “Studies on effect of friction stir welding process parameters on weld quality of al sicp metal matrix composites;.” 2014. Thesis, Anna University. Accessed January 19, 2020. http://shodhganga.inflibnet.ac.in/handle/10603/17305.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

P, Periyasamy. “Studies on effect of friction stir welding process parameters on weld quality of al sicp metal matrix composites;.” 2014. Web. 19 Jan 2020.

Vancouver:

P P. Studies on effect of friction stir welding process parameters on weld quality of al sicp metal matrix composites;. [Internet] [Thesis]. Anna University; 2014. [cited 2020 Jan 19]. Available from: http://shodhganga.inflibnet.ac.in/handle/10603/17305.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

P P. Studies on effect of friction stir welding process parameters on weld quality of al sicp metal matrix composites;. [Thesis]. Anna University; 2014. Available from: http://shodhganga.inflibnet.ac.in/handle/10603/17305

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Anna University

25. Ramanujam, R. Multi response process parameter optimization of turning Al SiCP metal matrix composites; -.

Degree: Mechanical Engineering, 2014, Anna University

URL: http://shodhganga.inflibnet.ac.in/handle/10603/25227

►

Aluminium based metal matrix composite materials are one of the widely known composites which found considerable applications in aerospace automotive and electronic industries because of… (more)

Subjects/Keywords: Mechanical Engineering; Mechanical engineering; Metal matrix composites; Process parameter; Unreinforced alloys

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Ramanujam, R. (2014). Multi response process parameter optimization of turning Al SiCP metal matrix composites; -. (Thesis). Anna University. Retrieved from http://shodhganga.inflibnet.ac.in/handle/10603/25227

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Ramanujam, R. “Multi response process parameter optimization of turning Al SiCP metal matrix composites; -.” 2014. Thesis, Anna University. Accessed January 19, 2020. http://shodhganga.inflibnet.ac.in/handle/10603/25227.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Ramanujam, R. “Multi response process parameter optimization of turning Al SiCP metal matrix composites; -.” 2014. Web. 19 Jan 2020.

Vancouver:

Ramanujam R. Multi response process parameter optimization of turning Al SiCP metal matrix composites; -. [Internet] [Thesis]. Anna University; 2014. [cited 2020 Jan 19]. Available from: http://shodhganga.inflibnet.ac.in/handle/10603/25227.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Ramanujam R. Multi response process parameter optimization of turning Al SiCP metal matrix composites; -. [Thesis]. Anna University; 2014. Available from: http://shodhganga.inflibnet.ac.in/handle/10603/25227

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

26. Kathiresan M. Processing and performance Characteristics of aluminium alloy Based metal matrix composites;.

Degree: Processing and performance Characteristics of aluminium alloy Based metal matrix composites, 2014, Anna University

URL: http://shodhganga.inflibnet.ac.in/handle/10603/26373

►

Aluminium based Metal Matrix Composites MMCs are newer newlinematerials having many favourable mechanical properties and a wide range of newlineapplications from automotive to aerospace gradually… (more)

Subjects/Keywords: Aluminium oxide; High elastic modulus; Metal Matrix Composites

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

M, K. (2014). Processing and performance Characteristics of aluminium alloy Based metal matrix composites;. (Thesis). Anna University. Retrieved from http://shodhganga.inflibnet.ac.in/handle/10603/26373

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

M, Kathiresan. “Processing and performance Characteristics of aluminium alloy Based metal matrix composites;.” 2014. Thesis, Anna University. Accessed January 19, 2020. http://shodhganga.inflibnet.ac.in/handle/10603/26373.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

M, Kathiresan. “Processing and performance Characteristics of aluminium alloy Based metal matrix composites;.” 2014. Web. 19 Jan 2020.

Vancouver:

M K. Processing and performance Characteristics of aluminium alloy Based metal matrix composites;. [Internet] [Thesis]. Anna University; 2014. [cited 2020 Jan 19]. Available from: http://shodhganga.inflibnet.ac.in/handle/10603/26373.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

M K. Processing and performance Characteristics of aluminium alloy Based metal matrix composites;. [Thesis]. Anna University; 2014. Available from: http://shodhganga.inflibnet.ac.in/handle/10603/26373

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

27. Kathiresan M. Processing and performance Characteristics of aluminium alloy Based metal matrix composites;.

Degree: Processing and performance Characteristics of aluminium alloy Based metal matrix composites, 2014, Anna University

URL: http://shodhganga.inflibnet.ac.in/handle/10603/26375

►

Aluminium based Metal Matrix Composites MMCs are newer newlinematerials having many favourable mechanical properties and a wide range of newlineapplications from automotive to aerospace gradually… (more)

Subjects/Keywords: Aluminium oxide; High elastic modulus; Metal Matrix Composites

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

M, K. (2014). Processing and performance Characteristics of aluminium alloy Based metal matrix composites;. (Thesis). Anna University. Retrieved from http://shodhganga.inflibnet.ac.in/handle/10603/26375

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

M, Kathiresan. “Processing and performance Characteristics of aluminium alloy Based metal matrix composites;.” 2014. Thesis, Anna University. Accessed January 19, 2020. http://shodhganga.inflibnet.ac.in/handle/10603/26375.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

M, Kathiresan. “Processing and performance Characteristics of aluminium alloy Based metal matrix composites;.” 2014. Web. 19 Jan 2020.

Vancouver:

M K. Processing and performance Characteristics of aluminium alloy Based metal matrix composites;. [Internet] [Thesis]. Anna University; 2014. [cited 2020 Jan 19]. Available from: http://shodhganga.inflibnet.ac.in/handle/10603/26375.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

M K. Processing and performance Characteristics of aluminium alloy Based metal matrix composites;. [Thesis]. Anna University; 2014. Available from: http://shodhganga.inflibnet.ac.in/handle/10603/26375

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

28. Kathiresan M. Processing and performance Characteristics of aluminium alloy Based metal matrix composites;.

Degree: Processing and performance Characteristics of aluminium alloy Based metal matrix composites, 2014, Anna University

URL: http://shodhganga.inflibnet.ac.in/handle/10603/26377

►

Aluminium based Metal Matrix Composites MMCs are newer newlinematerials having many favourable mechanical properties and a wide range of newlineapplications from automotive to aerospace gradually… (more)

Subjects/Keywords: Aluminium oxide; High elastic modulus; Metal Matrix Composites

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

M, K. (2014). Processing and performance Characteristics of aluminium alloy Based metal matrix composites;. (Thesis). Anna University. Retrieved from http://shodhganga.inflibnet.ac.in/handle/10603/26377

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

M, Kathiresan. “Processing and performance Characteristics of aluminium alloy Based metal matrix composites;.” 2014. Thesis, Anna University. Accessed January 19, 2020. http://shodhganga.inflibnet.ac.in/handle/10603/26377.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

M, Kathiresan. “Processing and performance Characteristics of aluminium alloy Based metal matrix composites;.” 2014. Web. 19 Jan 2020.

Vancouver:

M K. Processing and performance Characteristics of aluminium alloy Based metal matrix composites;. [Internet] [Thesis]. Anna University; 2014. [cited 2020 Jan 19]. Available from: http://shodhganga.inflibnet.ac.in/handle/10603/26377.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

M K. Processing and performance Characteristics of aluminium alloy Based metal matrix composites;. [Thesis]. Anna University; 2014. Available from: http://shodhganga.inflibnet.ac.in/handle/10603/26377

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

29. Kathiresan M. Processing and performance Characteristics of aluminium alloy Based metal matrix composites;.

Degree: Processing and performance Characteristics of aluminium alloy Based metal matrix composites, 2014, Anna University

URL: http://shodhganga.inflibnet.ac.in/handle/10603/26379

►

Aluminium based Metal Matrix Composites MMCs are newer newlinematerials having many favourable mechanical properties and a wide range of newlineapplications from automotive to aerospace gradually… (more)

Subjects/Keywords: Aluminium oxide; High elastic modulus; Metal Matrix Composites

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

M, K. (2014). Processing and performance Characteristics of aluminium alloy Based metal matrix composites;. (Thesis). Anna University. Retrieved from http://shodhganga.inflibnet.ac.in/handle/10603/26379

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

M, Kathiresan. “Processing and performance Characteristics of aluminium alloy Based metal matrix composites;.” 2014. Thesis, Anna University. Accessed January 19, 2020. http://shodhganga.inflibnet.ac.in/handle/10603/26379.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

M, Kathiresan. “Processing and performance Characteristics of aluminium alloy Based metal matrix composites;.” 2014. Web. 19 Jan 2020.

Vancouver:

M K. Processing and performance Characteristics of aluminium alloy Based metal matrix composites;. [Internet] [Thesis]. Anna University; 2014. [cited 2020 Jan 19]. Available from: http://shodhganga.inflibnet.ac.in/handle/10603/26379.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

M K. Processing and performance Characteristics of aluminium alloy Based metal matrix composites;. [Thesis]. Anna University; 2014. Available from: http://shodhganga.inflibnet.ac.in/handle/10603/26379

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

30. Kathiresan M. Processing and performance Characteristics of aluminium alloy Based metal matrix composites;.

Degree: Processing and performance Characteristics of aluminium alloy Based metal matrix composites, 2014, Anna University

URL: http://shodhganga.inflibnet.ac.in/handle/10603/26380

►

Aluminium based Metal Matrix Composites MMCs are newer newlinematerials having many favourable mechanical properties and a wide range of newlineapplications from automotive to aerospace gradually… (more)

Subjects/Keywords: Aluminium oxide; High elastic modulus; Metal Matrix Composites

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

M, K. (2014). Processing and performance Characteristics of aluminium alloy Based metal matrix composites;. (Thesis). Anna University. Retrieved from http://shodhganga.inflibnet.ac.in/handle/10603/26380

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

M, Kathiresan. “Processing and performance Characteristics of aluminium alloy Based metal matrix composites;.” 2014. Thesis, Anna University. Accessed January 19, 2020. http://shodhganga.inflibnet.ac.in/handle/10603/26380.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

M, Kathiresan. “Processing and performance Characteristics of aluminium alloy Based metal matrix composites;.” 2014. Web. 19 Jan 2020.

Vancouver:

M K. Processing and performance Characteristics of aluminium alloy Based metal matrix composites;. [Internet] [Thesis]. Anna University; 2014. [cited 2020 Jan 19]. Available from: http://shodhganga.inflibnet.ac.in/handle/10603/26380.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

M K. Processing and performance Characteristics of aluminium alloy Based metal matrix composites;. [Thesis]. Anna University; 2014. Available from: http://shodhganga.inflibnet.ac.in/handle/10603/26380

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

		in
And / Or
		in
And / Or
		in
And / Or
		in

Open Access Theses and Dissertations