subject:(Marching Cubes)

1. Raad, Ali. Modèle prédictif à base d'approches qualitatives pour la contribution à la radiothérapie adaptative : Qualitative based predictive model for adaptative radiotherapy treatment.

Degree: Docteur es, Automatique, Génie Informatique, Traitement du Signal et des Images, 2015, Université Lille I – Sciences et Technologies

URL: http://www.theses.fr/2015LIL10166

►

Le sujet de thèse s’inscrit dans le cadre de la lutte contre le cancer. La radiothérapie externe est une technique de traitement de cibles tumorales… (more)

▼

Le sujet de thèse s’inscrit dans le cadre de la lutte contre le cancer. La radiothérapie externe est une technique de traitement de cibles tumorales par des particules radioactives, sous guidage d’un système d’imagerie. L’efficacité de ce traitement à ciblage macroscopique dépend en partie de l’évolution de la cible biologique au cours du traitement, qui se programme sur plusieurs séances. Dans notre travail, nous nous sommes concentrés sur l’évolution temporelle de la cible biologique séance par séance. Le but est d’estimer l’espace couvert par son mouvement, et permettant de prédire le positionnement futur de la cible et corriger ou adapter le plan de traitement. Notre cible biologique microscopique dans le cas du cancer ORL est décrite par la glande parotide qui est sensible aux radiations. L’objectif est de minimiser l’accessibilité des rayons à cet organe lorsque la cible tumorale se trouve dans sa périphérie. Nous avons proposé deux méthodes de reconstruction en 3D de la parotide, à savoir B-Spline de Bézier bi-cubique et Marching cubes. Une fois la reconstruction est effectuée, le volume de la glande parotide, à chaque session est calculé. Une zone de sécurité autour de la glande parotide a été définie. Enfin, une classification des patients a été réalisée en se basant sur le dosage associé au traitement. A un niveau macroscopique, nous avons développé une approche d'aide à la décision pour affiner la position relative du patient sur la table de traitement. Cette approche est basée sur la modélisation par réseaux de neurones et spécifiquement MLP et RBF. La performance entre ces deux techniques a été analysée, suivant les positionnements géométriques des patients.

The thesis subject is defined in the framework of the fight against cancer. External radiation therapy is a technical treatment of tumor targets by radioactive particles, under guidance of an imaging system. The effectiveness of this macroscopic targeting treatment depends in part on the evolution and movement of the biological target during the treatment, which is planned over several sessions. In our work, we focused to the temporal evolution of the biological target session by session. The goal is to estimate the space covered by the target movement in each session, and to predict the future position of the target and thus to correct or adapt the treatment plan. Our microscopic biological target in the case of head and neck cancer is described by the parotid gland which is sensitive to the radiation. The objective is to minimize avoid radiating the parotid, when the tumor is in its periphery. We proposed two 3D reconstruction methods of the parotid, namely B-Spline Bezier bi-cubic and Marching cubes. Once the reconstruction is performed, the volume of the parotid gland, at each session of treatment is calculated. A safety zone around the parotid gland was defined. Finally, a classification of the patients was performed based on the associated dose for the treatment.At a macroscopic level, we have developed a decision-support approach to refine…

Advisors/Committee Members: Merzouki, Rochdi (thesis director), Ayache, Mohammad (thesis director).

Subjects/Keywords: Marching cubes; 006.32

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Raad, A. (2015). Modèle prédictif à base d'approches qualitatives pour la contribution à la radiothérapie adaptative : Qualitative based predictive model for adaptative radiotherapy treatment. (Doctoral Dissertation). Université Lille I – Sciences et Technologies. Retrieved from http://www.theses.fr/2015LIL10166

Chicago Manual of Style (16^th Edition):

Raad, Ali. “Modèle prédictif à base d'approches qualitatives pour la contribution à la radiothérapie adaptative : Qualitative based predictive model for adaptative radiotherapy treatment.” 2015. Doctoral Dissertation, Université Lille I – Sciences et Technologies. Accessed January 27, 2021. http://www.theses.fr/2015LIL10166.

MLA Handbook (7^th Edition):

Raad, Ali. “Modèle prédictif à base d'approches qualitatives pour la contribution à la radiothérapie adaptative : Qualitative based predictive model for adaptative radiotherapy treatment.” 2015. Web. 27 Jan 2021.

Vancouver:

Raad A. Modèle prédictif à base d'approches qualitatives pour la contribution à la radiothérapie adaptative : Qualitative based predictive model for adaptative radiotherapy treatment. [Internet] [Doctoral dissertation]. Université Lille I – Sciences et Technologies; 2015. [cited 2021 Jan 27]. Available from: http://www.theses.fr/2015LIL10166.

Council of Science Editors:

Raad A. Modèle prédictif à base d'approches qualitatives pour la contribution à la radiothérapie adaptative : Qualitative based predictive model for adaptative radiotherapy treatment. [Doctoral Dissertation]. Université Lille I – Sciences et Technologies; 2015. Available from: http://www.theses.fr/2015LIL10166

2. 横山, 裕己. 生体力学解析のための多重等値面Marching Cubes法の開発 : Multi Isosurface Marching Cubes Method for Biomechanical Analysis; セイタイリキガクカイセキノタメノタジュウトウチメン Marching Cubesホウノカイハツ.

Degree: Nara Institute of Science and Technology / 奈良先端科学技術大学院大学

URL: http://hdl.handle.net/10061/5195

Subjects/Keywords: Marching Cubes法

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

横山, �. (n.d.). 生体力学解析のための多重等値面Marching Cubes法の開発 : Multi Isosurface Marching Cubes Method for Biomechanical Analysis; セイタイリキガクカイセキノタメノタジュウトウチメン Marching Cubesホウノカイハツ. (Thesis). Nara Institute of Science and Technology / 奈良先端科学技術大学院大学. Retrieved from http://hdl.handle.net/10061/5195

Note: this citation may be lacking information needed for this citation format:
No year of publication.
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

横山, 裕己. “生体力学解析のための多重等値面Marching Cubes法の開発 : Multi Isosurface Marching Cubes Method for Biomechanical Analysis; セイタイリキガクカイセキノタメノタジュウトウチメン Marching Cubesホウノカイハツ.” Thesis, Nara Institute of Science and Technology / 奈良先端科学技術大学院大学. Accessed January 27, 2021. http://hdl.handle.net/10061/5195.

Note: this citation may be lacking information needed for this citation format:
No year of publication.
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

横山, 裕己. “生体力学解析のための多重等値面Marching Cubes法の開発 : Multi Isosurface Marching Cubes Method for Biomechanical Analysis; セイタイリキガクカイセキノタメノタジュウトウチメン Marching Cubesホウノカイハツ.” Web. 27 Jan 2021.

Note: this citation may be lacking information needed for this citation format:
No year of publication.

Vancouver:

横山 �. 生体力学解析のための多重等値面Marching Cubes法の開発 : Multi Isosurface Marching Cubes Method for Biomechanical Analysis; セイタイリキガクカイセキノタメノタジュウトウチメン Marching Cubesホウノカイハツ. [Internet] [Thesis]. Nara Institute of Science and Technology / 奈良先端科学技術大学院大学; [cited 2021 Jan 27]. Available from: http://hdl.handle.net/10061/5195.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
No year of publication.

Council of Science Editors:

横山 �. 生体力学解析のための多重等値面Marching Cubes法の開発 : Multi Isosurface Marching Cubes Method for Biomechanical Analysis; セイタイリキガクカイセキノタメノタジュウトウチメン Marching Cubesホウノカイハツ. [Thesis]. Nara Institute of Science and Technology / 奈良先端科学技術大学院大学; Available from: http://hdl.handle.net/10061/5195

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
No year of publication.

Universidade Nova

3. Rogeiro, João Pedro Martins. Geometry based visualization with OpenCL.

Degree: 2011, Universidade Nova

URL: http://www.rcaap.pt/detail.jsp?id=oai:run.unl.pt:10362/7951

►

Dissertação para obtenção do Grau de Mestre em Engenharia Informática

This work targets the design and implementation of an isosurface extraction solution capable of handling… (more)

Subjects/Keywords: Isosurface extraction; Volume visualization; Marching cubes; OpenCL

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Rogeiro, J. P. M. (2011). Geometry based visualization with OpenCL. (Thesis). Universidade Nova. Retrieved from http://www.rcaap.pt/detail.jsp?id=oai:run.unl.pt:10362/7951

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Rogeiro, João Pedro Martins. “Geometry based visualization with OpenCL.” 2011. Thesis, Universidade Nova. Accessed January 27, 2021. http://www.rcaap.pt/detail.jsp?id=oai:run.unl.pt:10362/7951.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Rogeiro, João Pedro Martins. “Geometry based visualization with OpenCL.” 2011. Web. 27 Jan 2021.

Vancouver:

Rogeiro JPM. Geometry based visualization with OpenCL. [Internet] [Thesis]. Universidade Nova; 2011. [cited 2021 Jan 27]. Available from: http://www.rcaap.pt/detail.jsp?id=oai:run.unl.pt:10362/7951.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Rogeiro JPM. Geometry based visualization with OpenCL. [Thesis]. Universidade Nova; 2011. Available from: http://www.rcaap.pt/detail.jsp?id=oai:run.unl.pt:10362/7951

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

4. Zivčák, Jan. Simulace tekutin a plynů: Fluid Simulation.

Degree: 2018, Brno University of Technology

URL: http://hdl.handle.net/11012/55471

► This bachelor´s thesis is focused on theme of fluid and gas simulation performed on personal computers. This branch of computer graphics and computer simulation is… (more)

Subjects/Keywords: simulace; simulace tekutin; SPH; marching cubes; CUDA; simulation; fluid simulation; SPH; marching cubes; CUDA

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Zivčák, J. (2018). Simulace tekutin a plynů: Fluid Simulation. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/55471

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Zivčák, Jan. “Simulace tekutin a plynů: Fluid Simulation.” 2018. Thesis, Brno University of Technology. Accessed January 27, 2021. http://hdl.handle.net/11012/55471.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Zivčák, Jan. “Simulace tekutin a plynů: Fluid Simulation.” 2018. Web. 27 Jan 2021.

Vancouver:

Zivčák J. Simulace tekutin a plynů: Fluid Simulation. [Internet] [Thesis]. Brno University of Technology; 2018. [cited 2021 Jan 27]. Available from: http://hdl.handle.net/11012/55471.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Zivčák J. Simulace tekutin a plynů: Fluid Simulation. [Thesis]. Brno University of Technology; 2018. Available from: http://hdl.handle.net/11012/55471

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

5. Svěchovský, Radek. Rekonstrukce 3D geometrie na základě diskrétních volumetrických dat: 3D Geometry Reconstruction from Discrete Volumetric Data.

Degree: 2019, Brno University of Technology

URL: http://hdl.handle.net/11012/53472

► Conversion of discrete volumetric data to boundary representation is quite common operation. Standard approach to resolve this problem is to use well-known Marching cubes algorithm,… (more)

Subjects/Keywords: objemový model; voxel; polygonální model; izoplocha; rekonstrukce; extrakce; Marching cubes; volumetric model; voxel; polygonal model; isosurface; reconstruction; extraction; Marching cubes

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Svěchovský, R. (2019). Rekonstrukce 3D geometrie na základě diskrétních volumetrických dat: 3D Geometry Reconstruction from Discrete Volumetric Data. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/53472

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Svěchovský, Radek. “Rekonstrukce 3D geometrie na základě diskrétních volumetrických dat: 3D Geometry Reconstruction from Discrete Volumetric Data.” 2019. Thesis, Brno University of Technology. Accessed January 27, 2021. http://hdl.handle.net/11012/53472.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Svěchovský, Radek. “Rekonstrukce 3D geometrie na základě diskrétních volumetrických dat: 3D Geometry Reconstruction from Discrete Volumetric Data.” 2019. Web. 27 Jan 2021.

Vancouver:

Svěchovský R. Rekonstrukce 3D geometrie na základě diskrétních volumetrických dat: 3D Geometry Reconstruction from Discrete Volumetric Data. [Internet] [Thesis]. Brno University of Technology; 2019. [cited 2021 Jan 27]. Available from: http://hdl.handle.net/11012/53472.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Svěchovský R. Rekonstrukce 3D geometrie na základě diskrétních volumetrických dat: 3D Geometry Reconstruction from Discrete Volumetric Data. [Thesis]. Brno University of Technology; 2019. Available from: http://hdl.handle.net/11012/53472

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Universidade do Rio Grande do Sul

6. Dietrich, Carlos Augusto. Grupos de arestas : uma nova abordagem para entender a qualidade da malha gerada pelo Marching Cubes e suas variantes.

Degree: 2008, Universidade do Rio Grande do Sul

URL: http://hdl.handle.net/10183/29569

►

Este trabalho descreve uma nova visão sobre um dos algoritmos mais importantes da Computação Gráfica, o algoritmo para a poligonização de isosuperfícies Marching Cubes (MC).… (more)

▼

Este trabalho descreve uma nova visão sobre um dos algoritmos mais importantes da Computação Gráfica, o algoritmo para a poligonização de isosuperfícies Marching Cubes (MC). Esta visão permite o estudo das situações onde são gerados triângulos de baixa qualidade, uma das grandes deficiências do MC, e serve como suporte à proposta de modificações no algoritmo. Neste trabalho também são propostas três modificações ao MC, com objetivo de gerar triângulos de boa qualidade e manter as características mais atraentes do MC, ou seja, a sua simplicidade, eficiência e robustez. O funcionamento do MC é analisado a partir da decomposição das células de amostragem em Grupos de Arestas. Os Grupos de Arestas permitem o estudo do modo como os triângulos são construídos no interior de cada célula de amostragem, e possibilitam identificar onde e como são gerados triângulos de baixa qualidade. As situações onde triângulos de baixa qualidade são gerados são resolvidas através da proposta de três modificações no algoritmo MC, sendo elas: (1) um critério para conduzir a construção da tabela de triangulações, (2) o reposicionamento das arestas ativas e (3) o deslocamento dos vértices de intersecção sobre as arestas ativas. A primeira modificação é a proposta de um novo critério para conduzir a construção da tabela de triangulações do MC. O critério tem como objetivo o aumento da qualidade da malha gerada, através do uso de triangulações que não resultem nos grupos de arestas que têm maior probabilidade de gerar triângulos de baixa qualidade. A segunda modificação propõe o reposicionamento das arestas ativas. Os grupos de arestas mostram que a posição das arestas ativas influencia a qualidade dos triângulos, o que motiva a criação de um procedimento que reposicione as arestas ativas em relação ao comportamento da isosuperfície. Este procedimento resulta na maximização da distância entre os vértices de intersecção e na melhora na qualidade da malha gerada. A terceira modificação propõe o deslocamento dos vértices de intersecção ao longo das arestas ativas. O movimento dos vértices é controlado por um parâmetro que oferece a oportunidade de comprometer a qualidade de aproximação (distância entre a malha gerada e a isosuperfície) em razão da qualidade da malha. O conjunto de modificações propostas resulta no algoritmo Macet (Marching Cubes with Edge Transformations). O Macet é simples e eficiente, gera malhas com qualidade de aproximação igual ou superior à do MC e onde os triângulos de baixa qualidade ainda têm qualidade comparável ou superior aos métodos disponíveis atualmente.

This work sheds a new light on one of the most important algorithms of Computer Graphics, the isosurface polygonization algorithm Marching Cubes (MC). The analysis described here allows the study of situations where low quality triangles are generated, one of the well-know MC drawbacks, and also supports the proposal of extensions for the algorithm. In this work three extensions for MC are also proposed, all with purpose of increase the quality of the resulting…

Advisors/Committee Members: Comba, Joao Luiz Dihl.

Subjects/Keywords: Computação gráfica; Isosurfaces; 3D; Marching cubes; Realidade virtual; Visualização

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Dietrich, C. A. (2008). Grupos de arestas : uma nova abordagem para entender a qualidade da malha gerada pelo Marching Cubes e suas variantes. (Thesis). Universidade do Rio Grande do Sul. Retrieved from http://hdl.handle.net/10183/29569

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Dietrich, Carlos Augusto. “Grupos de arestas : uma nova abordagem para entender a qualidade da malha gerada pelo Marching Cubes e suas variantes.” 2008. Thesis, Universidade do Rio Grande do Sul. Accessed January 27, 2021. http://hdl.handle.net/10183/29569.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Dietrich, Carlos Augusto. “Grupos de arestas : uma nova abordagem para entender a qualidade da malha gerada pelo Marching Cubes e suas variantes.” 2008. Web. 27 Jan 2021.

Vancouver:

Dietrich CA. Grupos de arestas : uma nova abordagem para entender a qualidade da malha gerada pelo Marching Cubes e suas variantes. [Internet] [Thesis]. Universidade do Rio Grande do Sul; 2008. [cited 2021 Jan 27]. Available from: http://hdl.handle.net/10183/29569.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Dietrich CA. Grupos de arestas : uma nova abordagem para entender a qualidade da malha gerada pelo Marching Cubes e suas variantes. [Thesis]. Universidade do Rio Grande do Sul; 2008. Available from: http://hdl.handle.net/10183/29569

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Rochester Institute of Technology

7. Lukasiewicz, John. Scientific visualization using Pixar's RenderMan.

Degree: Computer Science (GCCIS), 2011, Rochester Institute of Technology

URL: https://scholarworks.rit.edu/theses/122

► This thesis will attempt to visualize astrophysical data that is proprocessed and formatted by the Spiegel software using Pixar's RenderMan. The output will consist of… (more)

Subjects/Keywords: Graphics; Marching cubes; Point cloud; RenderMan; Surface; Visualization

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Lukasiewicz, J. (2011). Scientific visualization using Pixar's RenderMan. (Thesis). Rochester Institute of Technology. Retrieved from https://scholarworks.rit.edu/theses/122

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Lukasiewicz, John. “Scientific visualization using Pixar's RenderMan.” 2011. Thesis, Rochester Institute of Technology. Accessed January 27, 2021. https://scholarworks.rit.edu/theses/122.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Lukasiewicz, John. “Scientific visualization using Pixar's RenderMan.” 2011. Web. 27 Jan 2021.

Vancouver:

Lukasiewicz J. Scientific visualization using Pixar's RenderMan. [Internet] [Thesis]. Rochester Institute of Technology; 2011. [cited 2021 Jan 27]. Available from: https://scholarworks.rit.edu/theses/122.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Lukasiewicz J. Scientific visualization using Pixar's RenderMan. [Thesis]. Rochester Institute of Technology; 2011. Available from: https://scholarworks.rit.edu/theses/122

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

University of Victoria

8. Sahbaei, Parto. Implicit representation of inscribed volumes.

Degree: Department of Computer Science, 2017, University of Victoria

URL: http://hdl.handle.net/1828/8036

► We present an implicit approach for constructing smooth isolated or interconnected 3-D inscribed volumes which can be employed for volumetric modeling of various kinds of… (more)

Subjects/Keywords: Marching Cubes; Implicit Modeling; Inscribed Volumes; Marching Tetra-hedra; Extended Marching Cubes; Dual Marching Cubes; Dual Contouring; Spline; Inscribed Curves; Subsurface Scattering; Laguerre tessellation; Radiolarians; Voronoi Diagram; The BlobTree; Octree; porous surfaces; spongy surfaces; Polytopes

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Sahbaei, P. (2017). Implicit representation of inscribed volumes. (Masters Thesis). University of Victoria. Retrieved from http://hdl.handle.net/1828/8036

Chicago Manual of Style (16^th Edition):

Sahbaei, Parto. “Implicit representation of inscribed volumes.” 2017. Masters Thesis, University of Victoria. Accessed January 27, 2021. http://hdl.handle.net/1828/8036.

MLA Handbook (7^th Edition):

Sahbaei, Parto. “Implicit representation of inscribed volumes.” 2017. Web. 27 Jan 2021.

Vancouver:

Sahbaei P. Implicit representation of inscribed volumes. [Internet] [Masters thesis]. University of Victoria; 2017. [cited 2021 Jan 27]. Available from: http://hdl.handle.net/1828/8036.

Council of Science Editors:

Sahbaei P. Implicit representation of inscribed volumes. [Masters Thesis]. University of Victoria; 2017. Available from: http://hdl.handle.net/1828/8036

9. Mathiason, Jesper. Procedurell generering av volymetrisk terräng på olika beräkningsenheter.

Degree: Informatics, 2016, University of Skövde

URL: http://urn.kb.se/resolve?urn=urn:nbn:se:his:diva-12373

► Detta arbete undersöker om de existerande algoritmerna Marching cubes och Perlin noise kan användas för att procedurellt generera terräng. Implementationen av dessa algoritmer genererar… (more)

Subjects/Keywords: Terränggenerering; GPGPU; Volymetrisk terräng; Marching Cubes; Perlin Noise; Computer Sciences; Datavetenskap (datalogi)

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Mathiason, J. (2016). Procedurell generering av volymetrisk terräng på olika beräkningsenheter. (Thesis). University of Skövde. Retrieved from http://urn.kb.se/resolve?urn=urn:nbn:se:his:diva-12373

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Mathiason, Jesper. “Procedurell generering av volymetrisk terräng på olika beräkningsenheter.” 2016. Thesis, University of Skövde. Accessed January 27, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:his:diva-12373.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Mathiason, Jesper. “Procedurell generering av volymetrisk terräng på olika beräkningsenheter.” 2016. Web. 27 Jan 2021.

Vancouver:

Mathiason J. Procedurell generering av volymetrisk terräng på olika beräkningsenheter. [Internet] [Thesis]. University of Skövde; 2016. [cited 2021 Jan 27]. Available from: http://urn.kb.se/resolve?urn=urn:nbn:se:his:diva-12373.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Mathiason J. Procedurell generering av volymetrisk terräng på olika beräkningsenheter. [Thesis]. University of Skövde; 2016. Available from: http://urn.kb.se/resolve?urn=urn:nbn:se:his:diva-12373

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

10. Zachar, Lukáš. Interaktivní 3D modelování lidských tkání na základě CT/MR dat: Interactive Human Tissues 3D Modelling by CT/MR Data.

Degree: 2019, Brno University of Technology

URL: http://hdl.handle.net/11012/55364

► The aim of this thesis is to create a system, which would make a 3D model of tissues based on CT or MRI scans. Input… (more)

Subjects/Keywords: pochodujúce kocky; modelovanie tkanív; segmentácia obrazu; marching cubes; tissues modelling; image segmentation

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Zachar, L. (2019). Interaktivní 3D modelování lidských tkání na základě CT/MR dat: Interactive Human Tissues 3D Modelling by CT/MR Data. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/55364

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Zachar, Lukáš. “Interaktivní 3D modelování lidských tkání na základě CT/MR dat: Interactive Human Tissues 3D Modelling by CT/MR Data.” 2019. Thesis, Brno University of Technology. Accessed January 27, 2021. http://hdl.handle.net/11012/55364.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Zachar, Lukáš. “Interaktivní 3D modelování lidských tkání na základě CT/MR dat: Interactive Human Tissues 3D Modelling by CT/MR Data.” 2019. Web. 27 Jan 2021.

Vancouver:

Zachar L. Interaktivní 3D modelování lidských tkání na základě CT/MR dat: Interactive Human Tissues 3D Modelling by CT/MR Data. [Internet] [Thesis]. Brno University of Technology; 2019. [cited 2021 Jan 27]. Available from: http://hdl.handle.net/11012/55364.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Zachar L. Interaktivní 3D modelování lidských tkání na základě CT/MR dat: Interactive Human Tissues 3D Modelling by CT/MR Data. [Thesis]. Brno University of Technology; 2019. Available from: http://hdl.handle.net/11012/55364

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

11. Koc, Karel. Vykreslování implicitních ploch: Rendering of Implicit Surfaces.

Degree: 2020, Brno University of Technology

URL: http://hdl.handle.net/11012/189728

This theses is focused on rendering of implicit surfaces. We are finding the ways how approach the issue and how to represent implicit surfaces, how to divide the scene and how to illuminate the scene. Advisors/Committee Members: Milet, Tomáš (advisor), Kobrtek, Jozef (referee).

Subjects/Keywords: Implicitní plochy; izoplochy; Marching cubes; Marching tetrahedra; Ray marching; Bounding volume hierarchy; KD stromy; binární rozdělování prostoru; K-means; kamera; metoda půlení intervalu; Perlinův šum; textury; osvětlovací modely; Phongův osvětlovací model; Implicit Surfaces; isosurface; Marching cubes; Marching tetrahedra; Ray marching; Bounding volume hierarchy; KD trees; binary space partitioning; K-means; camera; bisection method; Perlin noise; textures; reflection models; Phong reflection model

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Koc, K. (2020). Vykreslování implicitních ploch: Rendering of Implicit Surfaces. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/189728

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Koc, Karel. “Vykreslování implicitních ploch: Rendering of Implicit Surfaces.” 2020. Thesis, Brno University of Technology. Accessed January 27, 2021. http://hdl.handle.net/11012/189728.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Koc, Karel. “Vykreslování implicitních ploch: Rendering of Implicit Surfaces.” 2020. Web. 27 Jan 2021.

Vancouver:

Koc K. Vykreslování implicitních ploch: Rendering of Implicit Surfaces. [Internet] [Thesis]. Brno University of Technology; 2020. [cited 2021 Jan 27]. Available from: http://hdl.handle.net/11012/189728.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Koc K. Vykreslování implicitních ploch: Rendering of Implicit Surfaces. [Thesis]. Brno University of Technology; 2020. Available from: http://hdl.handle.net/11012/189728

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

12. Koc, Karel. Vykreslování implicitních ploch: Rendering of Implicit Surfaces.

Degree: 2019, Brno University of Technology

URL: http://hdl.handle.net/11012/56549

This theses is focused on rendering of implicit surfaces. We are finding the ways how approach the issue and how to represent implicit surfaces, how to divide the scene and how to illuminate the scene. Advisors/Committee Members: Milet, Tomáš (advisor), Kobrtek, Jozef (referee).

Subjects/Keywords: Implicitní plochy; izoplochy; Marching cubes; Marching tetrahedra; Ray marching; Bounding volume hierarchy; KD stromy; binární rozdělování prostoru; K-means; kamera; metoda půlení intervalu; Perlinův šum; textury; osvětlovací modely; Phongův osvětlovací model; Implicit Surfaces; isosurface; Marching cubes; Marching tetrahedra; Ray marching; Bounding volume hierarchy; KD trees; binary space partitioning; K-means; camera; bisection method; Perlin noise; textures; reflection models; Phong reflection model

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Koc, K. (2019). Vykreslování implicitních ploch: Rendering of Implicit Surfaces. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/56549

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Koc, Karel. “Vykreslování implicitních ploch: Rendering of Implicit Surfaces.” 2019. Thesis, Brno University of Technology. Accessed January 27, 2021. http://hdl.handle.net/11012/56549.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Koc, Karel. “Vykreslování implicitních ploch: Rendering of Implicit Surfaces.” 2019. Web. 27 Jan 2021.

Vancouver:

Koc K. Vykreslování implicitních ploch: Rendering of Implicit Surfaces. [Internet] [Thesis]. Brno University of Technology; 2019. [cited 2021 Jan 27]. Available from: http://hdl.handle.net/11012/56549.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Koc K. Vykreslování implicitních ploch: Rendering of Implicit Surfaces. [Thesis]. Brno University of Technology; 2019. Available from: http://hdl.handle.net/11012/56549

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

13. Koc, Karel. Vykreslování implicitních ploch: Rendering of Implicit Surfaces.

Degree: 2020, Brno University of Technology

URL: http://hdl.handle.net/11012/188383

This theses is focused on rendering of implicit surfaces. We are finding the ways how approach the issue and how to represent implicit surfaces, how to divide the scene and how to illuminate the scene. Advisors/Committee Members: Milet, Tomáš (advisor), Kobrtek, Jozef (referee).

Subjects/Keywords: Implicitní plochy; izoplochy; Marching cubes; Marching tetrahedra; Ray marching; Bounding volume hierarchy; KD stromy; binární rozdělování prostoru; K-means; kamera; metoda půlení intervalu; Perlinův šum; textury; osvětlovací modely; Phongův osvětlovací model; Implicit Surfaces; isosurface; Marching cubes; Marching tetrahedra; Ray marching; Bounding volume hierarchy; KD trees; binary space partitioning; K-means; camera; bisection method; Perlin noise; textures; reflection models; Phong reflection model

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Koc, K. (2020). Vykreslování implicitních ploch: Rendering of Implicit Surfaces. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/188383

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Koc, Karel. “Vykreslování implicitních ploch: Rendering of Implicit Surfaces.” 2020. Thesis, Brno University of Technology. Accessed January 27, 2021. http://hdl.handle.net/11012/188383.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Koc, Karel. “Vykreslování implicitních ploch: Rendering of Implicit Surfaces.” 2020. Web. 27 Jan 2021.

Vancouver:

Koc K. Vykreslování implicitních ploch: Rendering of Implicit Surfaces. [Internet] [Thesis]. Brno University of Technology; 2020. [cited 2021 Jan 27]. Available from: http://hdl.handle.net/11012/188383.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Koc K. Vykreslování implicitních ploch: Rendering of Implicit Surfaces. [Thesis]. Brno University of Technology; 2020. Available from: http://hdl.handle.net/11012/188383

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

14. Andersson, Patrik. Rendering with Marching Cubes, looking at Hybrid Solutions.

Degree: 2012, , School of Computing

URL: http://urn.kb.se/resolve?urn=urn:nbn:se:bth-4955

► Marching Cubes is a rendering technique that has many advantages for a lot of areas. It is a technique for representing scalar fields as… (more)

Subjects/Keywords: marching cubes; terrain; hybrid; hybrid solution; rendering; heightmaps; voxel rendering; marching tetrahedrons; Computer Sciences; Datavetenskap (datalogi); Human Computer Interaction; Människa-datorinteraktion (interaktionsdesign); Software Engineering; Programvaruteknik

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Andersson, P. (2012). Rendering with Marching Cubes, looking at Hybrid Solutions. (Thesis). , School of Computing. Retrieved from http://urn.kb.se/resolve?urn=urn:nbn:se:bth-4955

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Andersson, Patrik. “Rendering with Marching Cubes, looking at Hybrid Solutions.” 2012. Thesis, , School of Computing. Accessed January 27, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:bth-4955.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Andersson, Patrik. “Rendering with Marching Cubes, looking at Hybrid Solutions.” 2012. Web. 27 Jan 2021.

Vancouver:

Andersson P. Rendering with Marching Cubes, looking at Hybrid Solutions. [Internet] [Thesis]. , School of Computing; 2012. [cited 2021 Jan 27]. Available from: http://urn.kb.se/resolve?urn=urn:nbn:se:bth-4955.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Andersson P. Rendering with Marching Cubes, looking at Hybrid Solutions. [Thesis]. , School of Computing; 2012. Available from: http://urn.kb.se/resolve?urn=urn:nbn:se:bth-4955

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

15. Lindström, Kristoffer. Performance of Marching Cubes using DirectX Compute Shaders Compared to using HistoPyramids.

Degree: 2011, , School of Computing

URL: http://urn.kb.se/resolve?urn=urn:nbn:se:bth-4493

►

Visualization of volumetric data has always been useful in big va- riety of ways, for example computer tomography (CT) and magnet resonance tomography (MRT)… (more)

Subjects/Keywords: marching cubes; directx; compute shader; animation; terrain; Computer Sciences; Datavetenskap (datalogi); Human Computer Interaction; Människa-datorinteraktion (interaktionsdesign); Software Engineering; Programvaruteknik

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Lindström, K. (2011). Performance of Marching Cubes using DirectX Compute Shaders Compared to using HistoPyramids. (Thesis). , School of Computing. Retrieved from http://urn.kb.se/resolve?urn=urn:nbn:se:bth-4493

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Lindström, Kristoffer. “Performance of Marching Cubes using DirectX Compute Shaders Compared to using HistoPyramids.” 2011. Thesis, , School of Computing. Accessed January 27, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:bth-4493.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Lindström, Kristoffer. “Performance of Marching Cubes using DirectX Compute Shaders Compared to using HistoPyramids.” 2011. Web. 27 Jan 2021.

Vancouver:

Lindström K. Performance of Marching Cubes using DirectX Compute Shaders Compared to using HistoPyramids. [Internet] [Thesis]. , School of Computing; 2011. [cited 2021 Jan 27]. Available from: http://urn.kb.se/resolve?urn=urn:nbn:se:bth-4493.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Lindström K. Performance of Marching Cubes using DirectX Compute Shaders Compared to using HistoPyramids. [Thesis]. , School of Computing; 2011. Available from: http://urn.kb.se/resolve?urn=urn:nbn:se:bth-4493

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

University of Washington

16. Kalavakonda, Niveditha Chandrasekar. Isosurface Visualization Using Augmented Reality for Improving Tumor Resection Outcomes.

Degree: 2017, University of Washington

URL: http://hdl.handle.net/1773/40055

► Tumor resection techniques have significantly improved survival rates in cancer patients. However, these require chemotherapy or radiation as follow-up procedures. With the advent of Mixed… (more)

Subjects/Keywords: Augmented Reality; Graphics; Isosurface rendering; Marching Cubes; Microsoft HoloLens; Mixed Reality; Electrical engineering; Computer science; Electrical engineering

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Kalavakonda, N. C. (2017). Isosurface Visualization Using Augmented Reality for Improving Tumor Resection Outcomes. (Thesis). University of Washington. Retrieved from http://hdl.handle.net/1773/40055

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Kalavakonda, Niveditha Chandrasekar. “Isosurface Visualization Using Augmented Reality for Improving Tumor Resection Outcomes.” 2017. Thesis, University of Washington. Accessed January 27, 2021. http://hdl.handle.net/1773/40055.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Kalavakonda, Niveditha Chandrasekar. “Isosurface Visualization Using Augmented Reality for Improving Tumor Resection Outcomes.” 2017. Web. 27 Jan 2021.

Vancouver:

Kalavakonda NC. Isosurface Visualization Using Augmented Reality for Improving Tumor Resection Outcomes. [Internet] [Thesis]. University of Washington; 2017. [cited 2021 Jan 27]. Available from: http://hdl.handle.net/1773/40055.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Kalavakonda NC. Isosurface Visualization Using Augmented Reality for Improving Tumor Resection Outcomes. [Thesis]. University of Washington; 2017. Available from: http://hdl.handle.net/1773/40055

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

17. Horváth, Zsolt. Částicové simulace v reálném čase: Real-Time Particle Simulations.

Degree: 2020, Brno University of Technology

URL: http://hdl.handle.net/11012/189876

► Particle simulations in real-time become reality only a few years before, when in computer science occured the idea of GPGPU. This new technology allows use… (more)

Subjects/Keywords: Částicové simulace; částicové systémy; SPH (Smoothed Particle Hydrodynamics); CUDA; GPGPU; Marching cubes; teselace; Navier-Stokes; OpenGL; SDL; simulace tekutin; Particle simulations; particle systems; SPH (Smoothed Particle Hydrodynamics); CUDA; GPGPU; Marching cubes; tessalation; OpenGL; SDL; fluid simulations

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Horváth, Z. (2020). Částicové simulace v reálném čase: Real-Time Particle Simulations. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/189876

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Horváth, Zsolt. “Částicové simulace v reálném čase: Real-Time Particle Simulations.” 2020. Thesis, Brno University of Technology. Accessed January 27, 2021. http://hdl.handle.net/11012/189876.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Horváth, Zsolt. “Částicové simulace v reálném čase: Real-Time Particle Simulations.” 2020. Web. 27 Jan 2021.

Vancouver:

Horváth Z. Částicové simulace v reálném čase: Real-Time Particle Simulations. [Internet] [Thesis]. Brno University of Technology; 2020. [cited 2021 Jan 27]. Available from: http://hdl.handle.net/11012/189876.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Horváth Z. Částicové simulace v reálném čase: Real-Time Particle Simulations. [Thesis]. Brno University of Technology; 2020. Available from: http://hdl.handle.net/11012/189876

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

18. Zaragoci, Jean-François. Simulation numérique directe multiphasique de la déformation d’un alliage Al-Cu à l’état pâteux – Comparaison avec des observations par tomographie aux rayons X in situ en temps réel : Direct and multiphase numerical simulation of the Al-Cu alloy deformation in the mushy state – Comparison with in situ and real-time X-ray tomography observations.

Degree: Docteur es, Mécanique numérique, 2012, Paris, ENMP

URL: http://www.theses.fr/2012ENMP0088

►

La fissuration à chaud est un défaut majeur rencontré en solidification des alliages d'aluminium. Elle est liée à l'incapacité du liquide de s'écouler dans les… (more)

▼

La fissuration à chaud est un défaut majeur rencontré en solidification des alliages d'aluminium. Elle est liée à l'incapacité du liquide de s'écouler dans les zones où des porosités sont présentes, ne permettant pas de les refermer avant qu'elles gagnent en volume. Pour comprendre la fissuration à chaud, il est crucial de développer nos connaissances du comportement mécanique de la zone pâteuse. Pour cela, il est très utile d'effectuer des expériences de microtomographie aux rayons X et des simulations mécaniques sur des volumes élémentaires représentatifs. Dans cette thèse, nous proposons de coupler les deux approches en initialisant une simulation par éléments finis grâce à des données de microtomographie issues d'un test de traction isotherme d'un alliage d'aluminium-cuivre à l'état pâteux. Cette approche originale nous donne directement accès à la réalité expérimentale et permet des comparaisons des évolutions numérique et expérimentale de l'éprouvette. Nous expliquons dans un premier temps comment obtenir la représentation numérique à l'aide de l'algorithme des marching cubes et de la méthode d'immersion de volume. Nous présentons ensuite notre modèle numérique qui s'appuie sur une résolution monolithique des équations de Stokes. Une fois le champ de vitesse obtenu dans l'ensemble des phases solide, liquide et gazeuse, nous utilisons une méthode level set dans un formalisme eulérien afin de faire évoluer la morphologie de notre échantillon numérique. Malgré la simplicité du modèle, les résultats expérimentaux et numériques montrent un accord raisonnable en ce qui concerne la propagation de l'air à l'intérieur de l'échantillon.

Hot tearing is a major defect arising during solidification of aluminium alloys. This defect is associated with the inability of liquid to feed areas where voids have started to appear, not allowing to heal small defects before they grow bigger. To understand hot tearing, it is mandatory to develop a good knowledge of the semi-solid mechanical behaviour. It is thus very useful to carry out X-ray microtomographies experiments and mechanical simulations on representative elementary volumes. In this work, we couple the both approaches by initialising a finite element simulation with the help of microtomography data obtained during an isothermal tensile testing of an aluminium-copper alloy in the mushy state. This innovative approach gives a direct access to the experimental reality and allows comparisons of numerical and experimental evolutions of the sample. We explain in a first time how to get the numerical representation thanks to a marching cubes algorithm and the immersed volume method. Then, we present our numerical model for which we solve the Stokes equations in a monolithic way. Once the velocity computed in all the solid, liquid and gaseous phases, we use a level set method in a Eulerian formalism to obtain the morphological evolution of our numerical sample. Despite the model simplicity, numerical and experimental results show a reasonable agreement concerning the air…

Advisors/Committee Members: Bellet, Michel (thesis director), Gandin, Charles-André (thesis director).

Subjects/Keywords: Test de traction; Microtomographies in situ 3D en temps réel; Marching cubes; Eléments finis; Méthode level set; Tensile testing; In situ and real-time 3D microtomography; Marching cubes; Finite elements; Level set method

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Zaragoci, J. (2012). Simulation numérique directe multiphasique de la déformation d’un alliage Al-Cu à l’état pâteux – Comparaison avec des observations par tomographie aux rayons X in situ en temps réel : Direct and multiphase numerical simulation of the Al-Cu alloy deformation in the mushy state – Comparison with in situ and real-time X-ray tomography observations. (Doctoral Dissertation). Paris, ENMP. Retrieved from http://www.theses.fr/2012ENMP0088

Chicago Manual of Style (16^th Edition):

Zaragoci, Jean-François. “Simulation numérique directe multiphasique de la déformation d’un alliage Al-Cu à l’état pâteux – Comparaison avec des observations par tomographie aux rayons X in situ en temps réel : Direct and multiphase numerical simulation of the Al-Cu alloy deformation in the mushy state – Comparison with in situ and real-time X-ray tomography observations.” 2012. Doctoral Dissertation, Paris, ENMP. Accessed January 27, 2021. http://www.theses.fr/2012ENMP0088.

MLA Handbook (7^th Edition):

Zaragoci, Jean-François. “Simulation numérique directe multiphasique de la déformation d’un alliage Al-Cu à l’état pâteux – Comparaison avec des observations par tomographie aux rayons X in situ en temps réel : Direct and multiphase numerical simulation of the Al-Cu alloy deformation in the mushy state – Comparison with in situ and real-time X-ray tomography observations.” 2012. Web. 27 Jan 2021.

Vancouver:

Zaragoci J. Simulation numérique directe multiphasique de la déformation d’un alliage Al-Cu à l’état pâteux – Comparaison avec des observations par tomographie aux rayons X in situ en temps réel : Direct and multiphase numerical simulation of the Al-Cu alloy deformation in the mushy state – Comparison with in situ and real-time X-ray tomography observations. [Internet] [Doctoral dissertation]. Paris, ENMP; 2012. [cited 2021 Jan 27]. Available from: http://www.theses.fr/2012ENMP0088.

Council of Science Editors:

Zaragoci J. Simulation numérique directe multiphasique de la déformation d’un alliage Al-Cu à l’état pâteux – Comparaison avec des observations par tomographie aux rayons X in situ en temps réel : Direct and multiphase numerical simulation of the Al-Cu alloy deformation in the mushy state – Comparison with in situ and real-time X-ray tomography observations. [Doctoral Dissertation]. Paris, ENMP; 2012. Available from: http://www.theses.fr/2012ENMP0088

Brno University of Technology

19. Bačík, Ladislav. Využití GPU pro akcelerované zpracování obrazu: Image Processing on GPUs.

Degree: 2018, Brno University of Technology

URL: http://hdl.handle.net/11012/53131

► This master thesis deals with modern technologies in graphic hardware and using their for general purpose computing. It is primary focused on architecture of unified… (more)

Subjects/Keywords: technologie grafického hardware; obecné výpočty na grafické výpočetní jednotce; GPGPU; CUDA; volumetrická data; Marching cubes; technology of graphics hardware; general purpose computing on graphics processing units; GPGPU; CUDA; volumetric data; Marching cubes

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Bačík, L. (2018). Využití GPU pro akcelerované zpracování obrazu: Image Processing on GPUs. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/53131

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Bačík, Ladislav. “Využití GPU pro akcelerované zpracování obrazu: Image Processing on GPUs.” 2018. Thesis, Brno University of Technology. Accessed January 27, 2021. http://hdl.handle.net/11012/53131.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Bačík, Ladislav. “Využití GPU pro akcelerované zpracování obrazu: Image Processing on GPUs.” 2018. Web. 27 Jan 2021.

Vancouver:

Bačík L. Využití GPU pro akcelerované zpracování obrazu: Image Processing on GPUs. [Internet] [Thesis]. Brno University of Technology; 2018. [cited 2021 Jan 27]. Available from: http://hdl.handle.net/11012/53131.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Bačík L. Využití GPU pro akcelerované zpracování obrazu: Image Processing on GPUs. [Thesis]. Brno University of Technology; 2018. Available from: http://hdl.handle.net/11012/53131

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

20. Horváth, Zsolt. Částicové simulace v reálném čase: Real-Time Particle Simulations.

Degree: 2020, Brno University of Technology

URL: http://hdl.handle.net/11012/188744

► Particle simulations in real-time become reality only a few years before, when in computer science occured the idea of GPGPU. This new technology allows use… (more)

Subjects/Keywords: Částicové simulace; částicové systémy; SPH (Smoothed Particle Hydrodynamics); CUDA; GPGPU; Marching cubes; teselace; Navier-Stokes; OpenGL; SDL; simulace tekutin; Particle simulations; particle systems; SPH (Smoothed Particle Hydrodynamics); CUDA; GPGPU; Marching cubes; tessalation; OpenGL; SDL; fluid simulations

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Horváth, Z. (2020). Částicové simulace v reálném čase: Real-Time Particle Simulations. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/188744

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Horváth, Zsolt. “Částicové simulace v reálném čase: Real-Time Particle Simulations.” 2020. Thesis, Brno University of Technology. Accessed January 27, 2021. http://hdl.handle.net/11012/188744.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Horváth, Zsolt. “Částicové simulace v reálném čase: Real-Time Particle Simulations.” 2020. Web. 27 Jan 2021.

Vancouver:

Horváth Z. Částicové simulace v reálném čase: Real-Time Particle Simulations. [Internet] [Thesis]. Brno University of Technology; 2020. [cited 2021 Jan 27]. Available from: http://hdl.handle.net/11012/188744.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Horváth Z. Částicové simulace v reálném čase: Real-Time Particle Simulations. [Thesis]. Brno University of Technology; 2020. Available from: http://hdl.handle.net/11012/188744

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

21. Menclík, Tomáš. 3D model z MRI: 3D shape from MRI.

Degree: 2019, Brno University of Technology

URL: http://hdl.handle.net/11012/8646

► The main aim of the thesis is the reconstruction of three-dimensional surface from a~set of two-dimensional images. For the implementation of this application the programming… (more)

Subjects/Keywords: Java 3D; 3D grafika; OBJ souborový formát; STL souborový formát; čtečka 3D souborů; Marching cubes; rekonstrukce 3D povrchu; extrakce snímků; Java 3D; 3D graphic; OBJ file format; STL file format; 3D file loader; Marching cubes; 3D surface reconstruction; images extraction

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Menclík, T. (2019). 3D model z MRI: 3D shape from MRI. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/8646

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Menclík, Tomáš. “3D model z MRI: 3D shape from MRI.” 2019. Thesis, Brno University of Technology. Accessed January 27, 2021. http://hdl.handle.net/11012/8646.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Menclík, Tomáš. “3D model z MRI: 3D shape from MRI.” 2019. Web. 27 Jan 2021.

Vancouver:

Menclík T. 3D model z MRI: 3D shape from MRI. [Internet] [Thesis]. Brno University of Technology; 2019. [cited 2021 Jan 27]. Available from: http://hdl.handle.net/11012/8646.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Menclík T. 3D model z MRI: 3D shape from MRI. [Thesis]. Brno University of Technology; 2019. Available from: http://hdl.handle.net/11012/8646

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

22. Horváth, Zsolt. Částicové simulace v reálném čase: Real-Time Particle Simulations.

Degree: 2020, Brno University of Technology

URL: http://hdl.handle.net/11012/53729

► Particle simulations in real-time become reality only a few years before, when in computer science occured the idea of GPGPU. This new technology allows use… (more)

Subjects/Keywords: Částicové simulace; částicové systémy; SPH (Smoothed Particle Hydrodynamics); CUDA; GPGPU; Marching cubes; teselace; Navier-Stokes; OpenGL; SDL; simulace tekutin; Particle simulations; particle systems; SPH (Smoothed Particle Hydrodynamics); CUDA; GPGPU; Marching cubes; tessalation; OpenGL; SDL; fluid simulations

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Horváth, Z. (2020). Částicové simulace v reálném čase: Real-Time Particle Simulations. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/53729

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Horváth, Zsolt. “Částicové simulace v reálném čase: Real-Time Particle Simulations.” 2020. Thesis, Brno University of Technology. Accessed January 27, 2021. http://hdl.handle.net/11012/53729.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Horváth, Zsolt. “Částicové simulace v reálném čase: Real-Time Particle Simulations.” 2020. Web. 27 Jan 2021.

Vancouver:

Horváth Z. Částicové simulace v reálném čase: Real-Time Particle Simulations. [Internet] [Thesis]. Brno University of Technology; 2020. [cited 2021 Jan 27]. Available from: http://hdl.handle.net/11012/53729.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Horváth Z. Částicové simulace v reálném čase: Real-Time Particle Simulations. [Thesis]. Brno University of Technology; 2020. Available from: http://hdl.handle.net/11012/53729

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

23. Baštek, Jozef. Modelování a zobrazování pomocí blobů: Modelling and Rendering Using Blobs.

Degree: 2018, Brno University of Technology

URL: http://hdl.handle.net/11012/54197

► This thesis deals with blobs modeling and visualizing (iso-surfaces, implicit-surfaces). It includes implementation of full-featured editor of these objects. It provides real-time operations over surfaces.… (more)

Subjects/Keywords: Blob; iso-plocha; implicitní plocha; meta-balls; blobby-molecules; soft objects; Wyvillova kubická rovnice; deformace prostoru; warping; Barrovy operátory; marching-cubes; marchingtetrahedron; shrink-wrap; Perlinův šum; Blob; iso-surface; implicit surface; meta-balls; blobby-molecules; soft objects; Wyvill cubic equation; space deformation; warping; Barr operators; marching-cubes; marching-tetrahedron; shrink-wrap; perlin noise

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Baštek, J. (2018). Modelování a zobrazování pomocí blobů: Modelling and Rendering Using Blobs. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/54197

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Baštek, Jozef. “Modelování a zobrazování pomocí blobů: Modelling and Rendering Using Blobs.” 2018. Thesis, Brno University of Technology. Accessed January 27, 2021. http://hdl.handle.net/11012/54197.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Baštek, Jozef. “Modelování a zobrazování pomocí blobů: Modelling and Rendering Using Blobs.” 2018. Web. 27 Jan 2021.

Vancouver:

Baštek J. Modelování a zobrazování pomocí blobů: Modelling and Rendering Using Blobs. [Internet] [Thesis]. Brno University of Technology; 2018. [cited 2021 Jan 27]. Available from: http://hdl.handle.net/11012/54197.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Baštek J. Modelování a zobrazování pomocí blobů: Modelling and Rendering Using Blobs. [Thesis]. Brno University of Technology; 2018. Available from: http://hdl.handle.net/11012/54197

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

24. Nguyen, Quoc Trong. Triangulation of Non-Manifold Implicit Surfaces using Geometric Healing Techniques.

Degree: 2016, RCAAP

URL: https://www.rcaap.pt/detail.jsp?id=oai:ubibliorum.ubi.pt:10400.6/5826

►

Implicit surfaces used in geometric modeling are often limited to two-dimensional manifolds because they are defined as zero-set functions that separate the space into binary… (more)

▼

Implicit surfaces used in geometric modeling are often limited to two-dimensional manifolds because they are defined as zero-set functions that separate the space into binary regions. Non-manifold implicit surfaces containing singularities such as isolated points or self-intersection points are essentially non-polygonizable. Thus, triangulating and rendering such surfaces are not a trival task. This dissertation presents the design and implementation of an algorithm for triangulating and rendering of non-manifold implicit surfaces using geometric healing techniques. The presented algorithm, called Healed Marching-Cubes (HMC), is built on the standard Marching-Cubes algorithm introduced by Lorensen and Cline in 1987[LC87]. In the context of implicit surface triangulation and rendering, there are not many proposed algorithms to solve its typical problems such as self-intersection emerged by non-manifold surfaces. Hence, Healed Marching-Cubes will be a valuable contribution to the field of computer graphics and geometric computing.

As superfícies implícitas utilizadas em modelação geométrica estão muitas vezes limitadas a variedades topológicas bidimensionais (2-dimensional manifolds, do inglês) sem singularidades, porque são definidas como funções de conjuntos zero que separam o espaço em regiões binárias. Mas, em geral, as superfícies implícitas apresentam singularidades tais como pontos isolados e linhas de auto-interseção, pelo que são essencialmente não-trianguláveis. Isto significa que a triangulação e renderização de tais superfícies não são tarefas triviais. Esta dissertação descreve a conceção e a implementação de um algoritmo para a triangulação e renderização de superfícies implícitas com singularidades, utilizando para isso técnicas de restauração ou cura geométrica. O algoritmo apresentado, designado por healed marching cubes (HMC), pode ser visto como uma extensão do algoritmo marching cubes (MC), introduzido por Lorensen e Cline em 1987 [LC87]. No contexto de triangulação e renderização de superfícies implícitas, não existem muitos algoritmos propostos na literatura para resolver os seus problemas típicos, como a resolução de auto-interseções em superfícies com singularidades. Por isso, o algoritmo de healed marching cubes (HMC) poderá ser uma contribuição valiosa para a área de computação gráfica e computação geométrica.

Advisors/Committee Members: Gomes, Abel João Padrão.

Subjects/Keywords: Auto-Interseções; Marching Cubes; Superfície Implícita; Triangualação de Superfícies; Variedade Topológica; Variedade Topológica Com Auto-Interseções; Domínio/Área Científica::Engenharia e Tecnologia::Engenharia Eletrotécnica, Eletrónica e Informática

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Nguyen, Q. T. (2016). Triangulation of Non-Manifold Implicit Surfaces using Geometric Healing Techniques. (Thesis). RCAAP. Retrieved from https://www.rcaap.pt/detail.jsp?id=oai:ubibliorum.ubi.pt:10400.6/5826

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Nguyen, Quoc Trong. “Triangulation of Non-Manifold Implicit Surfaces using Geometric Healing Techniques.” 2016. Thesis, RCAAP. Accessed January 27, 2021. https://www.rcaap.pt/detail.jsp?id=oai:ubibliorum.ubi.pt:10400.6/5826.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Nguyen, Quoc Trong. “Triangulation of Non-Manifold Implicit Surfaces using Geometric Healing Techniques.” 2016. Web. 27 Jan 2021.

Vancouver:

Nguyen QT. Triangulation of Non-Manifold Implicit Surfaces using Geometric Healing Techniques. [Internet] [Thesis]. RCAAP; 2016. [cited 2021 Jan 27]. Available from: https://www.rcaap.pt/detail.jsp?id=oai:ubibliorum.ubi.pt:10400.6/5826.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Nguyen QT. Triangulation of Non-Manifold Implicit Surfaces using Geometric Healing Techniques. [Thesis]. RCAAP; 2016. Available from: https://www.rcaap.pt/detail.jsp?id=oai:ubibliorum.ubi.pt:10400.6/5826

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

25. Koblížek, Aleš. Real-Time Volumetric Terrain Rendering: Real-Time Volumetric Terrain Rendering.

Degree: 2020, Brno University of Technology

URL: http://hdl.handle.net/11012/189804

► This document describes my implementation of a volumetric terrain that can be modified in real time. The data structure used for storage of the volume… (more)

Subjects/Keywords: volumetrický terén; voxel; voxelový terén; pochodující kostky; šum; procedurální textury; shadow mapping; normal mapping; volumetric terrain; voxel; voxel terrain; Marching cubes; noise; procedural textures; shadow mapping; normal mapping

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Koblížek, A. (2020). Real-Time Volumetric Terrain Rendering: Real-Time Volumetric Terrain Rendering. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/189804

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Koblížek, Aleš. “Real-Time Volumetric Terrain Rendering: Real-Time Volumetric Terrain Rendering.” 2020. Thesis, Brno University of Technology. Accessed January 27, 2021. http://hdl.handle.net/11012/189804.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Koblížek, Aleš. “Real-Time Volumetric Terrain Rendering: Real-Time Volumetric Terrain Rendering.” 2020. Web. 27 Jan 2021.

Vancouver:

Koblížek A. Real-Time Volumetric Terrain Rendering: Real-Time Volumetric Terrain Rendering. [Internet] [Thesis]. Brno University of Technology; 2020. [cited 2021 Jan 27]. Available from: http://hdl.handle.net/11012/189804.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Koblížek A. Real-Time Volumetric Terrain Rendering: Real-Time Volumetric Terrain Rendering. [Thesis]. Brno University of Technology; 2020. Available from: http://hdl.handle.net/11012/189804

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

26. Engström, Carl. Marching Cubes med Deferred Rendering motor.

Degree: 2013, , School of Planning and Media Design

URL: http://urn.kb.se/resolve?urn=urn:nbn:se:bth-5542

►

Spel idag kräver en enorm mängd arbetstimmar för att skapas, därför behövs alltid sätt att spara tid och automatisera processer. Algoritmer för polygoniseringen av… (more)

Subjects/Keywords: Marching Cubes; Deferred Rendering; C++; DirectX 11; ljussättning; material; procedural content generation; procedurell generering; Human Computer Interaction; Människa-datorinteraktion (interaktionsdesign); Media and Communications; Medie- och kommunikationsvetenskap; Software Engineering; Programvaruteknik

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Engström, C. (2013). Marching Cubes med Deferred Rendering motor. (Thesis). , School of Planning and Media Design. Retrieved from http://urn.kb.se/resolve?urn=urn:nbn:se:bth-5542

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Engström, Carl. “Marching Cubes med Deferred Rendering motor.” 2013. Thesis, , School of Planning and Media Design. Accessed January 27, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:bth-5542.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Engström, Carl. “Marching Cubes med Deferred Rendering motor.” 2013. Web. 27 Jan 2021.

Vancouver:

Engström C. Marching Cubes med Deferred Rendering motor. [Internet] [Thesis]. , School of Planning and Media Design; 2013. [cited 2021 Jan 27]. Available from: http://urn.kb.se/resolve?urn=urn:nbn:se:bth-5542.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Engström C. Marching Cubes med Deferred Rendering motor. [Thesis]. , School of Planning and Media Design; 2013. Available from: http://urn.kb.se/resolve?urn=urn:nbn:se:bth-5542

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

27. Andersson, Patrik. Voxelbaserad rendering med "Marching Cubes"-algoritmen.

Degree: 2009, , School of Computing

URL: http://urn.kb.se/resolve?urn=urn:nbn:se:bth-6096

►

Det finns flera olika metoder och tekniker för tredimensionell rendering, alla med olika för- och nackdelar som lämpar sig för olika applikationer. Voxelbaserad rendering… (more)

Subjects/Keywords: Rendering; Voxel; Marching Cubes; Volymetric Data; Computer Sciences; Datavetenskap (datalogi)

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Andersson, P. (2009). Voxelbaserad rendering med "Marching Cubes"-algoritmen. (Thesis). , School of Computing. Retrieved from http://urn.kb.se/resolve?urn=urn:nbn:se:bth-6096

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Andersson, Patrik. “Voxelbaserad rendering med "Marching Cubes"-algoritmen.” 2009. Thesis, , School of Computing. Accessed January 27, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:bth-6096.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Andersson, Patrik. “Voxelbaserad rendering med "Marching Cubes"-algoritmen.” 2009. Web. 27 Jan 2021.

Vancouver:

Andersson P. Voxelbaserad rendering med "Marching Cubes"-algoritmen. [Internet] [Thesis]. , School of Computing; 2009. [cited 2021 Jan 27]. Available from: http://urn.kb.se/resolve?urn=urn:nbn:se:bth-6096.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Andersson P. Voxelbaserad rendering med "Marching Cubes"-algoritmen. [Thesis]. , School of Computing; 2009. Available from: http://urn.kb.se/resolve?urn=urn:nbn:se:bth-6096

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

28. Engström, Ludwig Pethrus. Volumetric Terrain Genereation on the GPU : A modern GPGPU approach to Marching Cubes.

Degree: Computer Science and Communication (CSC), 2015, KTH

URL: http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-172299

►

Volumetric visualization is something that has become more interesting during recent years. It has been something that was not feasible in an interactive environment… (more)

▼

Volumetric visualization is something that has become more interesting during recent years. It has been something that was not feasible in an interactive environment due to its complexity in the 3D space. However, today's technology and access to the power of the graphics processing unit (GPU) has made it feasible to render volumetric data interactively. This thesis explores the possibilities to create and render large volumetric terrain using an implementation of Marching Cubes on the GPU. With the advent of general-purpose computing on the GPU (GPGPU) it has become far easier to implement tradition CPU tasks on the GPU. By utilizing newly available functions in DirectX it is possible to create an easier implementation on the GPU using global buffers. Three implementations are created inside the Unity game engine using compute shaders. The implementations are then compared based on creation time, render times and memory consumption. Then a deeper analysis of the time distribution is presented which suggests that Unity introduces some overhead since copying buffers from GPU to CPU is time consuming. It did however improve render times due to its culling and optimization techniques. The system could be used in applications such as games or medical visualization. Finally some future improvements for culling and level of detail (LOD) techniques are discussed.

Volumetrisk visualisering är en teknik som har fått mer uppmärksamhet dom senaste åren. Det har varit någonting som inte har varit rimligt att göra i en interaktiv miljö på grund av dess komplexitet i 3D rymden. Med dagens teknik och tillgänglighet till grafikkortet (GPU) är det nu möjligt att rendera volumetrisk data i en interaktiv miljö. Den här uppsatsen utforskar möjligheterna till att skapa och rendera stora terräng landskap genom en implementering av Marching Cubes på GPU:n. Med framkomsten av general-purpose computing på grafikkortet(GPGPU) har det blivit lättare att programmera på GPU:n. Genom att använda nya funktioner tillgängliga i DirectX är det möjligt att skapa en enklare implementering på GPU:n som använder sig av globala buffrar. Tre implementeringar har skapats i spelmotorn Unity som använder compute shaders. Implementeringarna är sedan jämförda baserad på tid för generering av terräng, renderings tid samt minnes konsumption. Detta följs av en djupare analys av tidsdistribueringen för skapandet som pekar på att Unity håller tillbaka systemets hastiget pga kopierande av minne från GPU:n till CPU:n. Renderingstiden blev dock bättre med hjälp av den inbyggda culling-teknikerna och optimerings tekniker. Detta system skulle kunna appliceras inom spel eller medicinsk visualisering. Slutligen diskuteras framtida förbättringar för culling-tekniker och level of detail (LOD) tekniker.

Subjects/Keywords: GPGPU; Marching Cubes; DirectX; Volumetric Rendering; Computer Sciences; Datavetenskap (datalogi)

…addressed and solved in order to achieve good results. Marching Cubes [26] (MC)… …volumetric datasets using Marching Cubes at interactive rates on the GPU? 1 https… …a thorough walkthrough of the Marching Cubes algorithm will be presented. Finally some… …previous research in the field of Marching Cubes and GPGPU will be presented. 2.1 Volume… …advanced isosurface extraction algorithm like Marching Cubes (MC) [26]. MC is…

11 more images…

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Engström, L. P. (2015). Volumetric Terrain Genereation on the GPU : A modern GPGPU approach to Marching Cubes. (Thesis). KTH. Retrieved from http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-172299

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Engström, Ludwig Pethrus. “Volumetric Terrain Genereation on the GPU : A modern GPGPU approach to Marching Cubes.” 2015. Thesis, KTH. Accessed January 27, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-172299.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Engström, Ludwig Pethrus. “Volumetric Terrain Genereation on the GPU : A modern GPGPU approach to Marching Cubes.” 2015. Web. 27 Jan 2021.

Vancouver:

Engström LP. Volumetric Terrain Genereation on the GPU : A modern GPGPU approach to Marching Cubes. [Internet] [Thesis]. KTH; 2015. [cited 2021 Jan 27]. Available from: http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-172299.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Engström LP. Volumetric Terrain Genereation on the GPU : A modern GPGPU approach to Marching Cubes. [Thesis]. KTH; 2015. Available from: http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-172299

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

29. Koblížek, Aleš. Real-Time Volumetric Terrain Rendering: Real-Time Volumetric Terrain Rendering.

Degree: 2019, Brno University of Technology

URL: http://hdl.handle.net/11012/85160

► This document describes my implementation of a volumetric terrain that can be modified in real time. The data structure used for storage of the volume… (more)

Subjects/Keywords: volumetrický terén; voxel; voxelový terén; pochodující kostky; šum; procedurální textury; shadow mapping; normal mapping; volumetric terrain; voxel; voxel terrain; Marching cubes; noise; procedural textures; shadow mapping; normal mapping

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Koblížek, A. (2019). Real-Time Volumetric Terrain Rendering: Real-Time Volumetric Terrain Rendering. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/85160

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Koblížek, Aleš. “Real-Time Volumetric Terrain Rendering: Real-Time Volumetric Terrain Rendering.” 2019. Thesis, Brno University of Technology. Accessed January 27, 2021. http://hdl.handle.net/11012/85160.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Koblížek, Aleš. “Real-Time Volumetric Terrain Rendering: Real-Time Volumetric Terrain Rendering.” 2019. Web. 27 Jan 2021.

Vancouver:

Koblížek A. Real-Time Volumetric Terrain Rendering: Real-Time Volumetric Terrain Rendering. [Internet] [Thesis]. Brno University of Technology; 2019. [cited 2021 Jan 27]. Available from: http://hdl.handle.net/11012/85160.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Koblížek A. Real-Time Volumetric Terrain Rendering: Real-Time Volumetric Terrain Rendering. [Thesis]. Brno University of Technology; 2019. Available from: http://hdl.handle.net/11012/85160

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

30. Koblížek, Aleš. Real-Time Volumetric Terrain Rendering: Real-Time Volumetric Terrain Rendering.

Degree: 2020, Brno University of Technology

URL: http://hdl.handle.net/11012/188535

► This document describes my implementation of a volumetric terrain that can be modified in real time. The data structure used for storage of the volume… (more)

Subjects/Keywords: volumetrický terén; voxel; voxelový terén; pochodující kostky; šum; procedurální textury; shadow mapping; normal mapping; volumetric terrain; voxel; voxel terrain; Marching cubes; noise; procedural textures; shadow mapping; normal mapping

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Koblížek, A. (2020). Real-Time Volumetric Terrain Rendering: Real-Time Volumetric Terrain Rendering. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/188535

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Koblížek, Aleš. “Real-Time Volumetric Terrain Rendering: Real-Time Volumetric Terrain Rendering.” 2020. Thesis, Brno University of Technology. Accessed January 27, 2021. http://hdl.handle.net/11012/188535.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Koblížek, Aleš. “Real-Time Volumetric Terrain Rendering: Real-Time Volumetric Terrain Rendering.” 2020. Web. 27 Jan 2021.

Vancouver:

Koblížek A. Real-Time Volumetric Terrain Rendering: Real-Time Volumetric Terrain Rendering. [Internet] [Thesis]. Brno University of Technology; 2020. [cited 2021 Jan 27]. Available from: http://hdl.handle.net/11012/188535.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Koblížek A. Real-Time Volumetric Terrain Rendering: Real-Time Volumetric Terrain Rendering. [Thesis]. Brno University of Technology; 2020. Available from: http://hdl.handle.net/11012/188535

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

		in
And / Or
		in
And / Or
		in
And / Or
		in

Open Access Theses and Dissertations