subject:(Low Energy Transfer)

Delft University of Technology

1. Pronk, Anne (author). Combinations of Low Energy Trajectories for a Lunar L2 mission.

Degree: 2018, Delft University of Technology

URL: http://resolver.tudelft.nl/uuid:325b9609-7b2e-46cf-b4e7-02051082a0d2

► Measurements in the frequency range below 30 MHz, key to a better understanding of the origins of our universe, are one of the last unexplored… (more)

Subjects/Keywords: Low Energy Trajectory; Low Energy Transfer; Lunar; Lagrange; L2

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Pronk, A. (. (2018). Combinations of Low Energy Trajectories for a Lunar L2 mission. (Masters Thesis). Delft University of Technology. Retrieved from http://resolver.tudelft.nl/uuid:325b9609-7b2e-46cf-b4e7-02051082a0d2

Chicago Manual of Style (16^th Edition):

Pronk, Anne (author). “Combinations of Low Energy Trajectories for a Lunar L2 mission.” 2018. Masters Thesis, Delft University of Technology. Accessed March 07, 2021. http://resolver.tudelft.nl/uuid:325b9609-7b2e-46cf-b4e7-02051082a0d2.

MLA Handbook (7^th Edition):

Pronk, Anne (author). “Combinations of Low Energy Trajectories for a Lunar L2 mission.” 2018. Web. 07 Mar 2021.

Vancouver:

Pronk A(. Combinations of Low Energy Trajectories for a Lunar L2 mission. [Internet] [Masters thesis]. Delft University of Technology; 2018. [cited 2021 Mar 07]. Available from: http://resolver.tudelft.nl/uuid:325b9609-7b2e-46cf-b4e7-02051082a0d2.

Council of Science Editors:

Pronk A(. Combinations of Low Energy Trajectories for a Lunar L2 mission. [Masters Thesis]. Delft University of Technology; 2018. Available from: http://resolver.tudelft.nl/uuid:325b9609-7b2e-46cf-b4e7-02051082a0d2

Delft University of Technology

2. IJntema, Wieger (author). WipLoc: Perpetual Indoor Localization with RF Wireless Power Transfer.

Degree: 2016, Delft University of Technology

URL: http://resolver.tudelft.nl/uuid:7df92cdf-5ffc-4afc-9a95-9d2437bda5f5

►

Indoor localization is a topic that has been investigated for more than a decade. Yet, no single system exists that is widely adopted as the… (more)

Subjects/Keywords: Wireless Power Transfer; Indoor Localization; Radio frequency; Bluetooth Low Energy; Capture eﬀect; Orthogonal Codes

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

IJntema, W. (. (2016). WipLoc: Perpetual Indoor Localization with RF Wireless Power Transfer. (Masters Thesis). Delft University of Technology. Retrieved from http://resolver.tudelft.nl/uuid:7df92cdf-5ffc-4afc-9a95-9d2437bda5f5

Chicago Manual of Style (16^th Edition):

IJntema, Wieger (author). “WipLoc: Perpetual Indoor Localization with RF Wireless Power Transfer.” 2016. Masters Thesis, Delft University of Technology. Accessed March 07, 2021. http://resolver.tudelft.nl/uuid:7df92cdf-5ffc-4afc-9a95-9d2437bda5f5.

MLA Handbook (7^th Edition):

IJntema, Wieger (author). “WipLoc: Perpetual Indoor Localization with RF Wireless Power Transfer.” 2016. Web. 07 Mar 2021.

Vancouver:

IJntema W(. WipLoc: Perpetual Indoor Localization with RF Wireless Power Transfer. [Internet] [Masters thesis]. Delft University of Technology; 2016. [cited 2021 Mar 07]. Available from: http://resolver.tudelft.nl/uuid:7df92cdf-5ffc-4afc-9a95-9d2437bda5f5.

Council of Science Editors:

IJntema W(. WipLoc: Perpetual Indoor Localization with RF Wireless Power Transfer. [Masters Thesis]. Delft University of Technology; 2016. Available from: http://resolver.tudelft.nl/uuid:7df92cdf-5ffc-4afc-9a95-9d2437bda5f5

University of Louisville

3. Fenko, Anna. Evaluation of two-phase evaporation pressure drop correlations for low refrigerant mass flux.

Degree: MS, 2015, University of Louisville

URL: 10.18297/etd/2292 ; https://ir.library.louisville.edu/etd/2292

► This study was conducted to evaluate three currently popular two-phase pressure drop models for extremely low velocity refrigerant flow through smooth circular evaporators in… (more)

Subjects/Keywords: pressure drop; low flow; U-bend; evaporation; refrigerator; orientation; Energy Systems; Heat Transfer, Combustion; Manufacturing

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Fenko, A. (2015). Evaluation of two-phase evaporation pressure drop correlations for low refrigerant mass flux. (Masters Thesis). University of Louisville. Retrieved from 10.18297/etd/2292 ; https://ir.library.louisville.edu/etd/2292

Chicago Manual of Style (16^th Edition):

Fenko, Anna. “Evaluation of two-phase evaporation pressure drop correlations for low refrigerant mass flux.” 2015. Masters Thesis, University of Louisville. Accessed March 07, 2021. 10.18297/etd/2292 ; https://ir.library.louisville.edu/etd/2292.

MLA Handbook (7^th Edition):

Fenko, Anna. “Evaluation of two-phase evaporation pressure drop correlations for low refrigerant mass flux.” 2015. Web. 07 Mar 2021.

Vancouver:

Fenko A. Evaluation of two-phase evaporation pressure drop correlations for low refrigerant mass flux. [Internet] [Masters thesis]. University of Louisville; 2015. [cited 2021 Mar 07]. Available from: 10.18297/etd/2292 ; https://ir.library.louisville.edu/etd/2292.

Council of Science Editors:

Fenko A. Evaluation of two-phase evaporation pressure drop correlations for low refrigerant mass flux. [Masters Thesis]. University of Louisville; 2015. Available from: 10.18297/etd/2292 ; https://ir.library.louisville.edu/etd/2292

4. Shepard, John. A Preliminary Study Of Leo To Geo Transfers For Inclination Changes Using Libration Point Orbits.

Degree: MS, Space Studies, 2020, University of North Dakota

URL: https://commons.und.edu/theses/3121

► The required change in velocity for a satellite to change inclination has prompted studies of efficient orbital transfers. Modeling the motion of a spacecraft… (more)

Subjects/Keywords: CR3BP; invariant manifold; Libration Point Orbit; low-energy transfer; Lyapunov; orbital mechanics

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Shepard, J. (2020). A Preliminary Study Of Leo To Geo Transfers For Inclination Changes Using Libration Point Orbits. (Masters Thesis). University of North Dakota. Retrieved from https://commons.und.edu/theses/3121

Chicago Manual of Style (16^th Edition):

Shepard, John. “A Preliminary Study Of Leo To Geo Transfers For Inclination Changes Using Libration Point Orbits.” 2020. Masters Thesis, University of North Dakota. Accessed March 07, 2021. https://commons.und.edu/theses/3121.

MLA Handbook (7^th Edition):

Shepard, John. “A Preliminary Study Of Leo To Geo Transfers For Inclination Changes Using Libration Point Orbits.” 2020. Web. 07 Mar 2021.

Vancouver:

Shepard J. A Preliminary Study Of Leo To Geo Transfers For Inclination Changes Using Libration Point Orbits. [Internet] [Masters thesis]. University of North Dakota; 2020. [cited 2021 Mar 07]. Available from: https://commons.und.edu/theses/3121.

Council of Science Editors:

Shepard J. A Preliminary Study Of Leo To Geo Transfers For Inclination Changes Using Libration Point Orbits. [Masters Thesis]. University of North Dakota; 2020. Available from: https://commons.und.edu/theses/3121

Loughborough University

5. Muchmore, Suzi. Knowledge transfer : a qualitative investigation of the UK low carbon innovation system.

Degree: PhD, 2018, Loughborough University

URL: http://hdl.handle.net/2134/35118

► Innovation programmes require organisations to transfer both technology and knowledge to the diverse actors who operate within innovation eco-systems. The changing relationship between science and… (more)

▼ Innovation programmes require organisations to transfer both technology and knowledge to the diverse actors who operate within innovation eco-systems. The changing relationship between science and society has witnessed the growth of public private partnerships (PPP) to create new knowledge, while also triggering the emergence of a new role for universities as catalysts for innovation. This brings many challenges, stemming from the inherent nature of knowledge and the complex interactions involved with inter-disciplinary knowledge transfer. Concurrently, these public-funded programmes come under increasing scrutiny to demonstrate greater societal and economic impact as a return on research investment. Knowledge generated within the UK low carbon energy innovation system has the potential to facilitate the achievement of national emission targets. However, while knowledge may be successfully created, there is no guarantee that it will be disseminated and utilised in a way that contributes to the achievement of knowledge-related objectives. Current literature concentrates on the micro level inhibitors and enablers of knowledge transfer; however, a gap in empirical work which investigates system level knowledge interactions is evident. Research and practical application in this field has historically centred on technology transfer whilst under-emphasising the crucial role of knowledge within this complex, socio-technical innovation system. The overall aim of this qualitative study is to achieve a better understanding of the influences of knowledge transfer across a defined innovation system. This is achieved through the perceptions of participants via two case studies; one in a PPP and one in a University. Semi-structured interviews were conducted with twenty-eight participants, along with document analysis and participant observation at workshops, to investigate the participant perceptions. A three tier (macro-, meso- and micro-level) data analysis approach was adopted to reflect the systems level interactions. The study found that knowledge transfer is often perceived as the dissemination of information via explicit forms of knowledge, which may or may not be used by stakeholders to achieve innovation objectives. The main barriers to stakeholders utilising knowledge included: accessibility to knowledge; fit-for-purpose knowledge; stakeholder motivation/ability to use the knowledge; and viewing knowledge as an object. While there is an emerging impact agenda in academia, cultural and normative influences direct researchers towards traditional academic outputs (e.g. publications). Knowledge utilisation by stakeholders was found to be maximised through relational, stakeholder driven models, which view knowledge as a process. Knowledge utilisation was context specific, and, due to complex system influences, was never guaranteed to occur. Although planning for knowledge utilisation was undertaken at both the PPP and the University, implementing and measuring results was found to be difficult due to dynamic system influences…

Subjects/Keywords: 658.4; Knowledge transfer; Knowledge utilisation; Innovation systems; Research impact; Case study; Low-carbon innovation; Energy

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Muchmore, S. (2018). Knowledge transfer : a qualitative investigation of the UK low carbon innovation system. (Doctoral Dissertation). Loughborough University. Retrieved from http://hdl.handle.net/2134/35118

Chicago Manual of Style (16^th Edition):

Muchmore, Suzi. “Knowledge transfer : a qualitative investigation of the UK low carbon innovation system.” 2018. Doctoral Dissertation, Loughborough University. Accessed March 07, 2021. http://hdl.handle.net/2134/35118.

MLA Handbook (7^th Edition):

Muchmore, Suzi. “Knowledge transfer : a qualitative investigation of the UK low carbon innovation system.” 2018. Web. 07 Mar 2021.

Vancouver:

Muchmore S. Knowledge transfer : a qualitative investigation of the UK low carbon innovation system. [Internet] [Doctoral dissertation]. Loughborough University; 2018. [cited 2021 Mar 07]. Available from: http://hdl.handle.net/2134/35118.

Council of Science Editors:

Muchmore S. Knowledge transfer : a qualitative investigation of the UK low carbon innovation system. [Doctoral Dissertation]. Loughborough University; 2018. Available from: http://hdl.handle.net/2134/35118

Colorado School of Mines

6. Smalley, Duane D. Multi-nucleon transfer reaction studies of 6HE on 12C at 30 MeV using the SHARC and TIGRESS arrays.

Degree: PhD, Physics, 2012, Colorado School of Mines

URL: http://hdl.handle.net/11124/76818

► Two multi-nucleon transfer reactions were studied using 6He on 12C with the Silicon Highly-segmented Array for Reactions and Coulex (SHARC), a compact charged particle silicon… (more)

Subjects/Keywords: halo nuclei; low energy; transfer reactions; Nuclear structure; Nuclear physics; Particles (Nuclear physics)

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Smalley, D. D. (2012). Multi-nucleon transfer reaction studies of 6HE on 12C at 30 MeV using the SHARC and TIGRESS arrays. (Doctoral Dissertation). Colorado School of Mines. Retrieved from http://hdl.handle.net/11124/76818

Chicago Manual of Style (16^th Edition):

Smalley, Duane D. “Multi-nucleon transfer reaction studies of 6HE on 12C at 30 MeV using the SHARC and TIGRESS arrays.” 2012. Doctoral Dissertation, Colorado School of Mines. Accessed March 07, 2021. http://hdl.handle.net/11124/76818.

MLA Handbook (7^th Edition):

Smalley, Duane D. “Multi-nucleon transfer reaction studies of 6HE on 12C at 30 MeV using the SHARC and TIGRESS arrays.” 2012. Web. 07 Mar 2021.

Vancouver:

Smalley DD. Multi-nucleon transfer reaction studies of 6HE on 12C at 30 MeV using the SHARC and TIGRESS arrays. [Internet] [Doctoral dissertation]. Colorado School of Mines; 2012. [cited 2021 Mar 07]. Available from: http://hdl.handle.net/11124/76818.

Council of Science Editors:

Smalley DD. Multi-nucleon transfer reaction studies of 6HE on 12C at 30 MeV using the SHARC and TIGRESS arrays. [Doctoral Dissertation]. Colorado School of Mines; 2012. Available from: http://hdl.handle.net/11124/76818

University of Florida

7. Phalin, Amanda J. International Transfer of Solar Technology.

Degree: PhD, Economics, 2013, University of Florida

URL: https://ufdc.ufl.edu/UFE0045254

► This paper investigates the relationship between patent quality and the international transfer of solar technology. Using data from 84 countries, I also explore whether strengthening… (more)

Subjects/Keywords: Datasets; Energy technology; Environmental technology; Low income; Patents; Renewable energy; Solar energy; Statistical significance; Technology transfer; Variable costs; citations – diffusion – environment – intellectual – international – patents – property – quality – solar – technology – transfer

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Phalin, A. J. (2013). International Transfer of Solar Technology. (Doctoral Dissertation). University of Florida. Retrieved from https://ufdc.ufl.edu/UFE0045254

Chicago Manual of Style (16^th Edition):

Phalin, Amanda J. “International Transfer of Solar Technology.” 2013. Doctoral Dissertation, University of Florida. Accessed March 07, 2021. https://ufdc.ufl.edu/UFE0045254.

MLA Handbook (7^th Edition):

Phalin, Amanda J. “International Transfer of Solar Technology.” 2013. Web. 07 Mar 2021.

Vancouver:

Phalin AJ. International Transfer of Solar Technology. [Internet] [Doctoral dissertation]. University of Florida; 2013. [cited 2021 Mar 07]. Available from: https://ufdc.ufl.edu/UFE0045254.

Council of Science Editors:

Phalin AJ. International Transfer of Solar Technology. [Doctoral Dissertation]. University of Florida; 2013. Available from: https://ufdc.ufl.edu/UFE0045254

University of Colorado

8. Lathrop, Brian Wesley. An Investigation of Alternate Transfer Strategies to the Sun-Earth Triangular Lagrangian Points.

Degree: PhD, Aerospace Engineering Sciences, 2014, University of Colorado

URL: https://scholar.colorado.edu/asen_gradetds/84

► Techniques for low energy transfers have been applied to constructing trajectories to various locations in the solar system. Previous techniques have concentrated on orbit… (more)

Subjects/Keywords: invariant manifolds; L4 L5; Lagrangian points; Low Energy Transfer; periodic orbits; three-body dynamics; Astrodynamics; Navigation, Guidance, Control and Dynamics

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Lathrop, B. W. (2014). An Investigation of Alternate Transfer Strategies to the Sun-Earth Triangular Lagrangian Points. (Doctoral Dissertation). University of Colorado. Retrieved from https://scholar.colorado.edu/asen_gradetds/84

Chicago Manual of Style (16^th Edition):

Lathrop, Brian Wesley. “An Investigation of Alternate Transfer Strategies to the Sun-Earth Triangular Lagrangian Points.” 2014. Doctoral Dissertation, University of Colorado. Accessed March 07, 2021. https://scholar.colorado.edu/asen_gradetds/84.

MLA Handbook (7^th Edition):

Lathrop, Brian Wesley. “An Investigation of Alternate Transfer Strategies to the Sun-Earth Triangular Lagrangian Points.” 2014. Web. 07 Mar 2021.

Vancouver:

Lathrop BW. An Investigation of Alternate Transfer Strategies to the Sun-Earth Triangular Lagrangian Points. [Internet] [Doctoral dissertation]. University of Colorado; 2014. [cited 2021 Mar 07]. Available from: https://scholar.colorado.edu/asen_gradetds/84.

Council of Science Editors:

Lathrop BW. An Investigation of Alternate Transfer Strategies to the Sun-Earth Triangular Lagrangian Points. [Doctoral Dissertation]. University of Colorado; 2014. Available from: https://scholar.colorado.edu/asen_gradetds/84

9. Husseini, Hazhar. Utvärdering av befintliga passivhus : En byggnadsfysikalisk bedömning och mätningar om temperatur, och fukt analys på ytterväggarna.

Degree: Sustainable Development of Society and Technology, 2012, Mälardalen University

URL: http://urn.kb.se/resolve?urn=urn:nbn:se:mdh:diva-15283

► Energy price are on the way up to a high level that will not diminish in the future make us to focus more on… (more)

Subjects/Keywords: low energy building; passive house; moisture transfer; external walls; temperature; thermal comfort; lågenergihus byggnad; passivhus; fukttransport; ytterväggar; temperatur; termisk komfort.

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Husseini, H. (2012). Utvärdering av befintliga passivhus : En byggnadsfysikalisk bedömning och mätningar om temperatur, och fukt analys på ytterväggarna. (Thesis). Mälardalen University. Retrieved from http://urn.kb.se/resolve?urn=urn:nbn:se:mdh:diva-15283

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Husseini, Hazhar. “Utvärdering av befintliga passivhus : En byggnadsfysikalisk bedömning och mätningar om temperatur, och fukt analys på ytterväggarna.” 2012. Thesis, Mälardalen University. Accessed March 07, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:mdh:diva-15283.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Husseini, Hazhar. “Utvärdering av befintliga passivhus : En byggnadsfysikalisk bedömning och mätningar om temperatur, och fukt analys på ytterväggarna.” 2012. Web. 07 Mar 2021.

Vancouver:

Husseini H. Utvärdering av befintliga passivhus : En byggnadsfysikalisk bedömning och mätningar om temperatur, och fukt analys på ytterväggarna. [Internet] [Thesis]. Mälardalen University; 2012. [cited 2021 Mar 07]. Available from: http://urn.kb.se/resolve?urn=urn:nbn:se:mdh:diva-15283.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Husseini H. Utvärdering av befintliga passivhus : En byggnadsfysikalisk bedömning och mätningar om temperatur, och fukt analys på ytterväggarna. [Thesis]. Mälardalen University; 2012. Available from: http://urn.kb.se/resolve?urn=urn:nbn:se:mdh:diva-15283

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

10. Baranyková, Zuzana. Provozní náklady pasivních domů: Operating costs of passive houses.

Degree: 2019, Brno University of Technology

URL: http://hdl.handle.net/11012/29055

► The main topic of this thesis is the comparison of operating costs (energy balance) of a passive house with running costs of a house of… (more)

Subjects/Keywords: Pasivní dům; nízkoenergetický dům; energetická bilance; provozní náklady; součinitel prostupu tepla.; Passive house; low - energy building; energy balance; operating costs; heat transfer coefficient.

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Baranyková, Z. (2019). Provozní náklady pasivních domů: Operating costs of passive houses. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/29055

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Baranyková, Zuzana. “Provozní náklady pasivních domů: Operating costs of passive houses.” 2019. Thesis, Brno University of Technology. Accessed March 07, 2021. http://hdl.handle.net/11012/29055.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Baranyková, Zuzana. “Provozní náklady pasivních domů: Operating costs of passive houses.” 2019. Web. 07 Mar 2021.

Vancouver:

Baranyková Z. Provozní náklady pasivních domů: Operating costs of passive houses. [Internet] [Thesis]. Brno University of Technology; 2019. [cited 2021 Mar 07]. Available from: http://hdl.handle.net/11012/29055.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Baranyková Z. Provozní náklady pasivních domů: Operating costs of passive houses. [Thesis]. Brno University of Technology; 2019. Available from: http://hdl.handle.net/11012/29055

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

11. Adami, Salah-Eddine. Optimisation de la récupération d'énergie dans les applications de rectenna : Reduction algorithms for speech intelligibility improvement dedicated to a bilateral cochlear implant.

Degree: Docteur es, Génie électrique, 2013, Ecully, Ecole centrale de Lyon

URL: http://www.theses.fr/2013ECDL0051

► Les progrès réalisés durant ces dernières années dans le domaine de la microélectronique et notamment vis-à-vis de l’augmentation exponentielle de la densité d’intégration des composants… (more)

▼ Les progrès réalisés durant ces dernières années dans le domaine de la microélectronique et notamment vis-à-vis de l’augmentation exponentielle de la densité d’intégration des composants et des systèmes a participé activement à l’apparition et au développement de systèmes portables communicants de plus en plus performants et polyvalents. La R&D dans les technologies de stockage d’énergie n’a pas suivi cette tendance d’évolution très rapide ; ce qui constitue un handicap majeur dans les évolutions futures des systèmes portables. La transmission d’énergie sans fils sur des distances considérables (plusieurs dizaines de mètres) grâce aux microondes constitue une solution très prometteuse pour pallier aux problèmes d’autonomie dans le cas des systèmes sans fils communicants. De plus, du fait de l’omniprésence des ondes électromagnétiques dans notre environnement avec des niveaux plus ou moins importants, la récupération et l’exploitation de cette énergie libre est également possible. La rectenna (Rectifying Antenna) est le dispositif permettant de capter et de convertir une onde électromagnétique en une tension continue. Plusieurs travaux de thèse axés sur l’étude et l’optimisation de la rectenna ont été réalisés au sein du laboratoire. Ces travaux avaient montré que pour des faibles niveaux de champs les tensions délivrées par la rectenna sont généralement très faibles et inexploitables. Aussi, comme la majorité des micro-sources d’énergie et à cause de son impédance interne, les performances de la rectenna dépendent fortement de sa charge de sortie. Ainsi, le développement d’un système d’interfaçage de la rectenna est nécessaire afin de pallier ces manquements inhérents du convertisseur RF/DC. Ce genre de système d’interfaçage est généralement absent dans la littérature à cause des faibles niveaux de puissance exploités. Par conséquent, la rectenna est très souvent utilisée tel quelle ; ce qui limite fortement le champ applicatif. Dans ce projet de recherche, un système de gestion énergétique de la rectenna complètement autonome a été conçu, développé et optimisé afin de garantir les performances optimales de la rectenna quelques soient les fluctuations de la puissance d’entrée et celles de la charge de sortie. Le circuit d’interfaçage permet également de fournir à la charge des niveaux de tension utilisables. Le système réalisé est basé tout d’abord sur l’utilisation d’un convertisseur DC/DC résonant pouvant fonctionner d’une manière complètement autonome à partir de niveaux très bas de la tension et de la puissance de la source. Ce convertisseur permet donc de garantir l’autonomie du système en éliminant la nécessité d’une source d’énergie auxiliaire. A cause de ses faibles performances énergétiques, ce convertisseur ne sera utilisé que durant la phase de démarrage. L’efficacité du système en termes de rendement énergétique et d’adaptation d’impédance est garantie grâce à l’utilisation d’un convertisseur Flyback fonctionnant dans son régime de conduction discontinu. Ainsi, une adaptation d’impédance très efficace est… Advisors/Committee Members: Vollaire, Christian (thesis director), Costa, François (thesis director).

Subjects/Keywords: Convertisseur DC/DC; Flyback; RF; Grappillage d’énergie; Transmission énergie sans fils; Faible tension; Faible puissance; Résonant; DC/DC converter; Flyback; RF; Energy harvesting; Wireless energy transfer; Low voltage; Ultra-low power; Resonant

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Adami, S. (2013). Optimisation de la récupération d'énergie dans les applications de rectenna : Reduction algorithms for speech intelligibility improvement dedicated to a bilateral cochlear implant. (Doctoral Dissertation). Ecully, Ecole centrale de Lyon. Retrieved from http://www.theses.fr/2013ECDL0051

Chicago Manual of Style (16^th Edition):

Adami, Salah-Eddine. “Optimisation de la récupération d'énergie dans les applications de rectenna : Reduction algorithms for speech intelligibility improvement dedicated to a bilateral cochlear implant.” 2013. Doctoral Dissertation, Ecully, Ecole centrale de Lyon. Accessed March 07, 2021. http://www.theses.fr/2013ECDL0051.

MLA Handbook (7^th Edition):

Adami, Salah-Eddine. “Optimisation de la récupération d'énergie dans les applications de rectenna : Reduction algorithms for speech intelligibility improvement dedicated to a bilateral cochlear implant.” 2013. Web. 07 Mar 2021.

Vancouver:

Adami S. Optimisation de la récupération d'énergie dans les applications de rectenna : Reduction algorithms for speech intelligibility improvement dedicated to a bilateral cochlear implant. [Internet] [Doctoral dissertation]. Ecully, Ecole centrale de Lyon; 2013. [cited 2021 Mar 07]. Available from: http://www.theses.fr/2013ECDL0051.

Council of Science Editors:

Adami S. Optimisation de la récupération d'énergie dans les applications de rectenna : Reduction algorithms for speech intelligibility improvement dedicated to a bilateral cochlear implant. [Doctoral Dissertation]. Ecully, Ecole centrale de Lyon; 2013. Available from: http://www.theses.fr/2013ECDL0051

Florida International University

12. Shinde, Pradeep R. Investigation of Low Reynolds Number Flow and Heat Transfer of Louvered Surfaces.

Degree: PhD, Mechanical Engineering, 2016, Florida International University

URL: https://digitalcommons.fiu.edu/etd/3038 ; 10.25148/etd.FIDC001195 ; FIDC001195

► This study focuses on the investigation of flow behavior at low Reynolds numbers by the experimental and numerical performance testing of micro-channel heat exchangers.… (more)

▼ This study focuses on the investigation of flow behavior at low Reynolds numbers by the experimental and numerical performance testing of micro-channel heat exchangers. An experimental study of the heat transfers and pressure drop of compact heat exchangers with louvered fins and flat tubes was conducted within a low air-side Reynolds number range of 20 < Re_Lp < 225. Using an existing low-speed wind tunnel, 26 sample heat exchangers of corrugated louver fin type, were tested. New correlations for Colburn j and Fanning friction f factor have been developed in terms of non-dimensional parameters. Within the investigated parameter ranges, it seems that both the j and f factors are better represented by two correlations in two flow regimes (one for Re_Lp = 20 – 80 and one for Re_Lp = 80 – 200) than a single regime correlation in the power-law format. The results support the conclusion that airflow and heat transfer at very low Reynolds numbers behaves differently from that at higher Reynolds numbers. The effect of the geometrical parameters on the heat exchanger performance was investigated. The numerical investigation was conducted for further understanding of the flow behavior at the range of experimentally tested Reynolds number. Ten different heat exchanger geometries with varied geometrical parameters obtained for the experimental studies were considered for the numerical investigation. The variations in the louver angle were the basis of the selection. The heat transfer and pressure drop performance was numerically investigated and the effect of the geometrical parameters was evaluated. Numerical results were compared against the experimental results. From the comparison, it is found that the current numerical viscous laminar models do not reflect experimentally observed transitional two regime flow behavior from fin directed to the louver directed at very low Reynolds number ranging from 20 to 200. The flow distribution through the fin and the louver region was quantified in terms of flow efficiency. The flow regime change was observed at very low Reynolds number similar to the experimental observations. However, the effect of two regime flow change does not reflect on the thermal hydraulic performance of numerical models. New correlations for the flow efficiency � have developed in terms of non-dimensional parameters. Advisors/Committee Members: Cheng-Xian Lin, Yiding Cao, George Dulikravich, Shekhar Bhansali, Chad Bowers.

Subjects/Keywords: Low Reynolds Number Flow; Microchannel Heat Exchangers; Compact Heat Exchangers; Thermal Hydraulic Performance of Heat Exchangers; Aerodynamics and Fluid Mechanics; Automotive Engineering; Energy Systems; Heat Transfer, Combustion

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Shinde, P. R. (2016). Investigation of Low Reynolds Number Flow and Heat Transfer of Louvered Surfaces. (Doctoral Dissertation). Florida International University. Retrieved from https://digitalcommons.fiu.edu/etd/3038 ; 10.25148/etd.FIDC001195 ; FIDC001195

Chicago Manual of Style (16^th Edition):

Shinde, Pradeep R. “Investigation of Low Reynolds Number Flow and Heat Transfer of Louvered Surfaces.” 2016. Doctoral Dissertation, Florida International University. Accessed March 07, 2021. https://digitalcommons.fiu.edu/etd/3038 ; 10.25148/etd.FIDC001195 ; FIDC001195.

MLA Handbook (7^th Edition):

Shinde, Pradeep R. “Investigation of Low Reynolds Number Flow and Heat Transfer of Louvered Surfaces.” 2016. Web. 07 Mar 2021.

Vancouver:

Shinde PR. Investigation of Low Reynolds Number Flow and Heat Transfer of Louvered Surfaces. [Internet] [Doctoral dissertation]. Florida International University; 2016. [cited 2021 Mar 07]. Available from: https://digitalcommons.fiu.edu/etd/3038 ; 10.25148/etd.FIDC001195 ; FIDC001195.

Council of Science Editors:

Shinde PR. Investigation of Low Reynolds Number Flow and Heat Transfer of Louvered Surfaces. [Doctoral Dissertation]. Florida International University; 2016. Available from: https://digitalcommons.fiu.edu/etd/3038 ; 10.25148/etd.FIDC001195 ; FIDC001195

Delft University of Technology

13. Daly, C.J. (author). Low Frequency Waves in the Shoaling and Nearshore Zone.

Degree: 2009, Delft University of Technology

URL: http://resolver.tudelft.nl/uuid:035517dd-c0f0-4f58-afa5-8b1bc672fc5c

► It has been found by many researchers that low frequency (LF) waves dominate the wave energy spectrum in very shallow water. Given that many longshore… (more)

▼ It has been found by many researchers that low frequency (LF) waves dominate the wave energy spectrum in very shallow water. Given that many longshore and cross-shore morphological processes are located within this zone, LF waves play an important role in determining morphological change, especially dune erosion and overwash during storm events. The numerical model, XBeach [Roelvink et al. (2008)], has been developed to simulate such morphological processes which are influenced by LF waves. For hydrodynamics, it utilizes the wave forcing determined from a second generation wave module to drive linearized shallow water equations within a flow module. The objective of this thesis focuses on validating the hydrodynamics of XBeach with particular attention paid to the estimated LF waves. This is particularly important to correctly estimate morphological changes, as it is highly dependent on the accurate representation of waves and currents. In the validation study, XBeach is used to replicate the flume experiment of van Noorloos [2003] in which bichromatic and irregular wave conditions are imposed on a plane sloping beach. The advantage of using this experiment is that measurements have a high spatial resolution, allowing for decomposition into incoming and outgoing wave components. Group-varying time-averaged short wave parameters are used to investigate the accuracy of the short wave module in XBeach, while at the same time the relationship between the short waves and LF waves are determined by looking at the energy transfer to and from the LF components. The results confirm many previous findings, such as the plus 180 degree phase difference between the short wave envelope and the bound LF wave, the dominance of LF wave energy in shallow water and the ability of LF waves to extend their reach to the uppermost parts on a beach. Given the limitations of the assumptions based on linear wave theory, the short wave results from XBeach are quite good, especially when using a newly modified breaker parameterization of Battjes and Janssen [1978] by Roelvink [Pers. Com. 2009]. The main shortfall of the model is that it tends to overestimate the bound LF wave heights in shallow water for irregular waves. This is believed to be partly due to the overestimation of the energy and radiation stresses contained in the short waves in this region. In reality, as waves approach breaking, the non-linearities present in the waves increase, which, during breaking, effectively redistributes energy within the wave spectrum. Since frequency dependent shoaling of short waves is not currently enabled in XBeach, the energy within the HF band may tend to encourage continued shoaling of the LF waves in the surf zone. As such, it is recommended that the current wave action conservation scheme be improved to allow for either reduction or redistribution of the short wave energy during shoaling. Wave run-up as modelled with the linearized shallow water equations is shown to over-steepen the front of the LF wave in the swash zone. This effect is a… Advisors/Committee Members: Roelvink, J.A. (mentor), Van Dongeren, A.R. (mentor), Van Thiel de Vries, J.S.M. (mentor), McCall, R.T. (mentor), Labeur, R.J. (mentor), Stive, M.J.F. (mentor).

Subjects/Keywords: low frequency waves; infragravity waves; wave shoaling; wave breaking; energy transfer

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Daly, C. J. (. (2009). Low Frequency Waves in the Shoaling and Nearshore Zone. (Masters Thesis). Delft University of Technology. Retrieved from http://resolver.tudelft.nl/uuid:035517dd-c0f0-4f58-afa5-8b1bc672fc5c

Chicago Manual of Style (16^th Edition):

Daly, C J (author). “Low Frequency Waves in the Shoaling and Nearshore Zone.” 2009. Masters Thesis, Delft University of Technology. Accessed March 07, 2021. http://resolver.tudelft.nl/uuid:035517dd-c0f0-4f58-afa5-8b1bc672fc5c.

MLA Handbook (7^th Edition):

Daly, C J (author). “Low Frequency Waves in the Shoaling and Nearshore Zone.” 2009. Web. 07 Mar 2021.

Vancouver:

Daly CJ(. Low Frequency Waves in the Shoaling and Nearshore Zone. [Internet] [Masters thesis]. Delft University of Technology; 2009. [cited 2021 Mar 07]. Available from: http://resolver.tudelft.nl/uuid:035517dd-c0f0-4f58-afa5-8b1bc672fc5c.

Council of Science Editors:

Daly CJ(. Low Frequency Waves in the Shoaling and Nearshore Zone. [Masters Thesis]. Delft University of Technology; 2009. Available from: http://resolver.tudelft.nl/uuid:035517dd-c0f0-4f58-afa5-8b1bc672fc5c

14. GANESAN, GAUTHAM. Accessibility Studies of Potentially Hazardous Asteroids from the Sun-Earth L2 Libration Point.

Degree: Space Technology, 2020, Luleå University of Technology

URL: http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-81630

► A newly proposed F-class mission by the European Space Agency (ESA) in 2019,Comet Interceptor, aims to dynamically intercept a New Solar System Objectsuch as… (more)

Subjects/Keywords: Near-Earth Objects; Potentially Hazardous Asteroids; Halo Orbit; Invariant Manifolds; Analytical construction; Palermo Scale; Low-Energy transfer; Aerospace Engineering; Rymd- och flygteknik

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

GANESAN, G. (2020). Accessibility Studies of Potentially Hazardous Asteroids from the Sun-Earth L2 Libration Point. (Thesis). Luleå University of Technology. Retrieved from http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-81630

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

GANESAN, GAUTHAM. “Accessibility Studies of Potentially Hazardous Asteroids from the Sun-Earth L2 Libration Point.” 2020. Thesis, Luleå University of Technology. Accessed March 07, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-81630.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

GANESAN, GAUTHAM. “Accessibility Studies of Potentially Hazardous Asteroids from the Sun-Earth L2 Libration Point.” 2020. Web. 07 Mar 2021.

Vancouver:

GANESAN G. Accessibility Studies of Potentially Hazardous Asteroids from the Sun-Earth L2 Libration Point. [Internet] [Thesis]. Luleå University of Technology; 2020. [cited 2021 Mar 07]. Available from: http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-81630.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

GANESAN G. Accessibility Studies of Potentially Hazardous Asteroids from the Sun-Earth L2 Libration Point. [Thesis]. Luleå University of Technology; 2020. Available from: http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-81630

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Michigan Technological University

15. Soloukmofrad, Ali. MODEL-BASED CONTROL OF HYBRID ELECTRIC POWERTRAINS INTEGRATED WITH LOW TEMPERATURE COMBUSTION ENGINES.

Degree: PhD, Department of Mechanical Engineering-Engineering Mechanics, 2017, Michigan Technological University

URL: https://digitalcommons.mtu.edu/etdr/384

► Powertrain electrification including hybridizing advanced combustion engines is a viable cost-effective solution to improve fuel economy of vehicles. This will provide opportunity for narrow-range… (more)

▼ Powertrain electrification including hybridizing advanced combustion engines is a viable cost-effective solution to improve fuel economy of vehicles. This will provide opportunity for narrow-range high-efficiency combustion regimes to be able to operate and consequently improve vehicle’s fuel conversion efficiency, compared to conventional hybrid electric vehicles (HEV)s. Low temperature combustion (LTC) engines offer the highest peak brake thermal efficiency reported in literature, but these engines have narrow operating range. In addition, LTC engines have ultra-low soot and nitrogen oxides (NOx) emissions, compared to conventional compression ignition and spark ignition (SI) engines. This dissertation concentrates on integrating the LTC engines (i) in series HEV and extended range electric vehicle (E-REV) architectures which decouple the engine from the drivetrain and allow the ICE to operate fully in a dedicated LTC mode, and (ii) a parallel HEV architecture to investigate optimum performance for fuel saving by utilizing electric torque assist level offered by e-motor. An electrified LTC-SI powertrain test setup is built at Michigan Technological University to develop the powertrain efficiency maps to be used in energy management control (EMC) framework. Three different types of Energy Management Control (EMC) strategies are developed. The EMC strategies encompass thermostatic rule-based control (RBC), offline (i.e., dynamic programing (DP) and pontryagin’s minimum principal (PMP)), and online optimization (i.e., model predictive control (MPC)). The developed EMC strategies are then implemented on experimentally validated HEV powertrain model to investigate the powertrain fuel economy. A dedicated single-mode homogeneous charge compression ignition (HCCI) and reactivity controlled compression ignition (RCCI) engines are integrated with series HEV powertrain. The results show up to 17.7% and 14.2% fuel economy saving of using HCCI and RCCI, respectively in series HEV compared to modern SI engine in the similar architecture. In addition, the MPC results show that sub-optimal fuel economy is achieved by predicting the vehicle speed profile for a time horizon of 70 sec. Furthermore, a multi-mode LTC-SI engine is integrated in both series and parallel HEVs. The developed multi-mode LTC-SI engine enables flexibility in combustion mode-switching over the driving cycle, which helps to improve the overall fuel economy. The engine operation modes include HCCI, RCCI, and SI modes. The powertrain controller is designed to enable switching among different modes, with minimum fuel penalty for transient engine operations. In the parallel HEV architecture, the results for the UDDS driving cycle show the maximum benefit of the multi-mode LTCSI engine is realized in the mild electrification level, where the LTC mode operating time increases dramatically from 5.0% in Plug-in Hybrid Electric Vehicle (PHEV) to 20.5% in mild HEV. Advisors/Committee Members: Mahdi Shahbakhti.

Subjects/Keywords: Low Temperature Combustion engine; hybrid electric vehicles; homogeneous charge compression ignition; reactivity controlled compression ignition; energy management control; powertrain electrification;

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Soloukmofrad, A. (2017). MODEL-BASED CONTROL OF HYBRID ELECTRIC POWERTRAINS INTEGRATED WITH LOW TEMPERATURE COMBUSTION ENGINES. (Doctoral Dissertation). Michigan Technological University. Retrieved from https://digitalcommons.mtu.edu/etdr/384

Chicago Manual of Style (16^th Edition):

Soloukmofrad, Ali. “MODEL-BASED CONTROL OF HYBRID ELECTRIC POWERTRAINS INTEGRATED WITH LOW TEMPERATURE COMBUSTION ENGINES.” 2017. Doctoral Dissertation, Michigan Technological University. Accessed March 07, 2021. https://digitalcommons.mtu.edu/etdr/384.

MLA Handbook (7^th Edition):

Soloukmofrad, Ali. “MODEL-BASED CONTROL OF HYBRID ELECTRIC POWERTRAINS INTEGRATED WITH LOW TEMPERATURE COMBUSTION ENGINES.” 2017. Web. 07 Mar 2021.

Vancouver:

Soloukmofrad A. MODEL-BASED CONTROL OF HYBRID ELECTRIC POWERTRAINS INTEGRATED WITH LOW TEMPERATURE COMBUSTION ENGINES. [Internet] [Doctoral dissertation]. Michigan Technological University; 2017. [cited 2021 Mar 07]. Available from: https://digitalcommons.mtu.edu/etdr/384.

Council of Science Editors:

Soloukmofrad A. MODEL-BASED CONTROL OF HYBRID ELECTRIC POWERTRAINS INTEGRATED WITH LOW TEMPERATURE COMBUSTION ENGINES. [Doctoral Dissertation]. Michigan Technological University; 2017. Available from: https://digitalcommons.mtu.edu/etdr/384

16. Gondre, Damien. Numerical modeling and analysis of heat and mass transfers in an adsorption heat storage tank : Influences of material properties, operating conditions and system design on storage performances : Modélisation et analyse numériques des échanges de chaleur et de masse dans un réacteur de stockage de chaleur par adsorption : Influence des propriétés des matériaux, des conditions opératoires et du système sur les performances de stockage.

Degree: Docteur es, Thermique, 2016, Lyon

URL: http://www.theses.fr/2016LYSEI022

►

Le développement de solutions de stockage de l'énergie est un défi majeur pour permettre la transition énergétique d'un mix énergétique fortement carboné vers une part… (more)

▼

Le développement de solutions de stockage de l'énergie est un défi majeur pour permettre la transition énergétique d'un mix énergétique fortement carboné vers une part plus importante des énergies renouvelables. La nécessité de stocker de l'énergie vient de la dissociation, spatiale et temporelle, entre la source et la demande d'énergie. Stocker de l'énergie répond à deux besoins principaux : disposer d'énergie à l'endroit et au moment où on en a besoin. La consommation de chaleur à basse température (pour le chauffage des logements et des bureaux) représente une part importante de la consommation totale d'énergie (environ 35 % en France en 2010). Le développement de solutions de stockage de chaleur est donc d'une grande importance, d'autant plus avec la montée en puissance des énergies renouvelables. Parmi les technologies de stockage envisageables, le stockage par adsorption semble être le meilleur compromis en termes de densité de stockage et de maintient des performances sur plusieurs cycles de charge-décharge. Cette thèse se focalise donc sur le stockage de chaleur par adsorption, et traite de l'amélioration des performances du stockage et de l'intégration du système au bâtiment. L'approche développée pour répondre à ces questions est numérique. L'influence des propriétés thermophysiques de l'adsorbant et du fluide sur la densité de puissance d'une part, mais aussi sur la densité de stockage et l'autonomie du système, est étudiée. L'analyse des résultats permet de sélectionner les propriétés des matériaux les plus influentes et de mieux comprendre les transferts de chaleur et de masse au sein du réacteur. L'influence des conditions opératoires est aussi mise en avant. Enfin, il est montré que la capacité de stockage est linéairement dépendante du volume de matériau, tandis que la puissance dépend de la surface de section et que l'autonomie dépend de la longueur du lit d'adsorbant. Par ailleurs, le rapport entre l'énergie absorbée (charge) et relâchée (décharge) est d'environ 70 %. Mais pendant la phase de charge, environ 60 % de la chaleur entrant dans le réacteur n'est pas absorbée et est directement relâchée à la sortie. La conversion globale entre l'énergie récupérable et l'énergie fournie n'est donc que de 25 %. Cela montre qu'un système de stockage de chaleur par adsorption ne peut pas être pensé comme un système autonome mais doit être intégré aux autres systèmes de chauffage du bâtiment et aux lois de commande qui les régissent. Utiliser la ressource solaire pour le préchauffage du réacteur est une idée intéressante car elle améliore l’efficacité de la charge et permet une réutilisation de la part récupérée en sortie pour le chauffage direct du bâtiment. La part stockée sous forme sensible peut être récupérée plusieurs heures plus tard. Le système est ainsi transformé en un stockage combiné sensible/adsorption, avec une solution pour du stockage à long terme et pour du stockage à court terme.

The development of energy storage solutions is a key challenge to enable the energy transition from fossil…

Advisors/Committee Members: Kuznik, Frédéric (thesis director).

Subjects/Keywords: Energétique; Energie; Adsorption; Consommation d’énergie; Approche numérique; Transfert de masse; Transfert de chaleur; Réservoir de stockage; Stockage de chaleur; Basse température; Propriétés thermiques; Energie solaire; Thermocinétique; Energetic; Energy; Adsorption; Energy consumption; Numerical method; Mass transfer; Heat transfer; Storage capacity; Heat storage; Low Temperature; Thermal properties; Solar thermal energy; 536.072

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Gondre, D. (2016). Numerical modeling and analysis of heat and mass transfers in an adsorption heat storage tank : Influences of material properties, operating conditions and system design on storage performances : Modélisation et analyse numériques des échanges de chaleur et de masse dans un réacteur de stockage de chaleur par adsorption : Influence des propriétés des matériaux, des conditions opératoires et du système sur les performances de stockage. (Doctoral Dissertation). Lyon. Retrieved from http://www.theses.fr/2016LYSEI022

Chicago Manual of Style (16^th Edition):

Gondre, Damien. “Numerical modeling and analysis of heat and mass transfers in an adsorption heat storage tank : Influences of material properties, operating conditions and system design on storage performances : Modélisation et analyse numériques des échanges de chaleur et de masse dans un réacteur de stockage de chaleur par adsorption : Influence des propriétés des matériaux, des conditions opératoires et du système sur les performances de stockage.” 2016. Doctoral Dissertation, Lyon. Accessed March 07, 2021. http://www.theses.fr/2016LYSEI022.

MLA Handbook (7^th Edition):

Gondre, Damien. “Numerical modeling and analysis of heat and mass transfers in an adsorption heat storage tank : Influences of material properties, operating conditions and system design on storage performances : Modélisation et analyse numériques des échanges de chaleur et de masse dans un réacteur de stockage de chaleur par adsorption : Influence des propriétés des matériaux, des conditions opératoires et du système sur les performances de stockage.” 2016. Web. 07 Mar 2021.

Vancouver:

Gondre D. Numerical modeling and analysis of heat and mass transfers in an adsorption heat storage tank : Influences of material properties, operating conditions and system design on storage performances : Modélisation et analyse numériques des échanges de chaleur et de masse dans un réacteur de stockage de chaleur par adsorption : Influence des propriétés des matériaux, des conditions opératoires et du système sur les performances de stockage. [Internet] [Doctoral dissertation]. Lyon; 2016. [cited 2021 Mar 07]. Available from: http://www.theses.fr/2016LYSEI022.

Council of Science Editors:

Gondre D. Numerical modeling and analysis of heat and mass transfers in an adsorption heat storage tank : Influences of material properties, operating conditions and system design on storage performances : Modélisation et analyse numériques des échanges de chaleur et de masse dans un réacteur de stockage de chaleur par adsorption : Influence des propriétés des matériaux, des conditions opératoires et du système sur les performances de stockage. [Doctoral Dissertation]. Lyon; 2016. Available from: http://www.theses.fr/2016LYSEI022

York University

17. Leung, Anthony. Quantum-Mechanical Approach to Collision-Induced Radiative Emissions.

Degree: PhD, Physics And Astronomy, 2018, York University

URL: http://hdl.handle.net/10315/34574

► Charge exchange is a process that occurs in an atomic collision where an electron from one of the colliding particles is transferred to the other;… (more)

Subjects/Keywords: Physics; Charge exchange; Electron transfer; Charge transfer; Basis generator method; Independent electron model; Dynamic screening; Radiative decay; X-rays; Ion-atom collision; Ion-molecule collision; Low energy; Atomic collisions; Atomic data; Atomic processes

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Leung, A. (2018). Quantum-Mechanical Approach to Collision-Induced Radiative Emissions. (Doctoral Dissertation). York University. Retrieved from http://hdl.handle.net/10315/34574

Chicago Manual of Style (16^th Edition):

Leung, Anthony. “Quantum-Mechanical Approach to Collision-Induced Radiative Emissions.” 2018. Doctoral Dissertation, York University. Accessed March 07, 2021. http://hdl.handle.net/10315/34574.

MLA Handbook (7^th Edition):

Leung, Anthony. “Quantum-Mechanical Approach to Collision-Induced Radiative Emissions.” 2018. Web. 07 Mar 2021.

Vancouver:

Leung A. Quantum-Mechanical Approach to Collision-Induced Radiative Emissions. [Internet] [Doctoral dissertation]. York University; 2018. [cited 2021 Mar 07]. Available from: http://hdl.handle.net/10315/34574.

Council of Science Editors:

Leung A. Quantum-Mechanical Approach to Collision-Induced Radiative Emissions. [Doctoral Dissertation]. York University; 2018. Available from: http://hdl.handle.net/10315/34574

University of KwaZulu-Natal

18. Owoputi, Adefemi Oluwaniyi. Power generation from low-grade energy source using organic rankine cycle technology.

Degree: 2017, University of KwaZulu-Natal

URL: http://hdl.handle.net/10413/14717

Abstract available in PDF file. Advisors/Committee Members: Inambao, Freddie Liswaniso. (advisor).

Subjects/Keywords: Organic rankine cycle.; Heat transfer fluid.; Global warming potential.; Renewable energy.; Low-grade energy.

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Owoputi, A. O. (2017). Power generation from low-grade energy source using organic rankine cycle technology. (Thesis). University of KwaZulu-Natal. Retrieved from http://hdl.handle.net/10413/14717

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Owoputi, Adefemi Oluwaniyi. “Power generation from low-grade energy source using organic rankine cycle technology.” 2017. Thesis, University of KwaZulu-Natal. Accessed March 07, 2021. http://hdl.handle.net/10413/14717.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Owoputi, Adefemi Oluwaniyi. “Power generation from low-grade energy source using organic rankine cycle technology.” 2017. Web. 07 Mar 2021.

Vancouver:

Owoputi AO. Power generation from low-grade energy source using organic rankine cycle technology. [Internet] [Thesis]. University of KwaZulu-Natal; 2017. [cited 2021 Mar 07]. Available from: http://hdl.handle.net/10413/14717.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Owoputi AO. Power generation from low-grade energy source using organic rankine cycle technology. [Thesis]. University of KwaZulu-Natal; 2017. Available from: http://hdl.handle.net/10413/14717

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

19. Osouf, Anais. Numerical simulations of experimental results in a power unit to validate the energy output resulting from gas pressurizations on nanoparticles.

Degree: MS, 4048, 2014, University of Illinois – Urbana-Champaign

URL: http://hdl.handle.net/2142/46765

► This thesis aims to interpret the first temperature measurements recorded by the research group in terms of heat release from pressurizations of specific nanoparticles of… (more)

Subjects/Keywords: low-energy nuclear reactions (LENR); gas loading; COMSOL Multiphysics; heat transfer; energy output

…Fukushima among others. Low Energy Nuclear Reactions (LENR) are phenomena at the nuclear… …to an explanation or verification of an existing theory. Publications on Low Energy Nuclear… …most energy dense sources in the world. However, in nuclear stations, reactions occur at very… …level which can be triggered at atmospheric or low temperature with Hydrogen or Deuterium, so… …government decision ; “In the fall of 1989, the US Department of Energy (DOE) shut down…

10 more images…

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Osouf, A. (2014). Numerical simulations of experimental results in a power unit to validate the energy output resulting from gas pressurizations on nanoparticles. (Thesis). University of Illinois – Urbana-Champaign. Retrieved from http://hdl.handle.net/2142/46765

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Osouf, Anais. “Numerical simulations of experimental results in a power unit to validate the energy output resulting from gas pressurizations on nanoparticles.” 2014. Thesis, University of Illinois – Urbana-Champaign. Accessed March 07, 2021. http://hdl.handle.net/2142/46765.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Osouf, Anais. “Numerical simulations of experimental results in a power unit to validate the energy output resulting from gas pressurizations on nanoparticles.” 2014. Web. 07 Mar 2021.

Vancouver:

Osouf A. Numerical simulations of experimental results in a power unit to validate the energy output resulting from gas pressurizations on nanoparticles. [Internet] [Thesis]. University of Illinois – Urbana-Champaign; 2014. [cited 2021 Mar 07]. Available from: http://hdl.handle.net/2142/46765.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Osouf A. Numerical simulations of experimental results in a power unit to validate the energy output resulting from gas pressurizations on nanoparticles. [Thesis]. University of Illinois – Urbana-Champaign; 2014. Available from: http://hdl.handle.net/2142/46765

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

20. Halama, Miroslav. Nízkoenergetická výstavba: Low-energy construction.

Degree: 2020, Brno University of Technology

URL: http://hdl.handle.net/11012/62792

► The bachelor thesis is proposing three construct variants of chosen family houses and assign each to particular energy performance certificate of A, B, and C… (more)

Subjects/Keywords: Nízkoenergetický dům; Průkaz energetické náročnosti budov; součinitel prostupu tepla; ekonomická efektivnost investice; oceňování staveb a stavebních prací.; Low-energy houses; energy performance certificate; heat transfer coefficient; investment efficiency; pricing of buildings and construction work.

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Halama, M. (2020). Nízkoenergetická výstavba: Low-energy construction. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/62792

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Halama, Miroslav. “Nízkoenergetická výstavba: Low-energy construction.” 2020. Thesis, Brno University of Technology. Accessed March 07, 2021. http://hdl.handle.net/11012/62792.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Halama, Miroslav. “Nízkoenergetická výstavba: Low-energy construction.” 2020. Web. 07 Mar 2021.

Vancouver:

Halama M. Nízkoenergetická výstavba: Low-energy construction. [Internet] [Thesis]. Brno University of Technology; 2020. [cited 2021 Mar 07]. Available from: http://hdl.handle.net/11012/62792.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Halama M. Nízkoenergetická výstavba: Low-energy construction. [Thesis]. Brno University of Technology; 2020. Available from: http://hdl.handle.net/11012/62792

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

21. Křenek, Daniel. Výpočtové hodnocení konstrukčních staviv na energetickou náročnost budovy: Computational assessment of structural building materials in terms of energy performance of the building.

Degree: 2019, Brno University of Technology

URL: http://hdl.handle.net/11012/70489

► Theme of the diploma thesis is computational assessment of structural building materials in terms of energy performance of the building. The history and types of… (more)

Subjects/Keywords: Nízkoenergetické stavby; energetická náročnost budov; pasivní dům; tepelně-technické vlastnosti stavebních materiálů; součinitel prostupu tepla; průkaz energetické náročnosti budov (PENB); energetický štítek obálky budovy (EŠOB); Low-energy building; energy performance of a building; passive house; heta-technical properties of building materials; overall coefficient of heat transfer; Energy Performance Certificate (PENB); European Union Energy Label (EŠOB)

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Křenek, D. (2019). Výpočtové hodnocení konstrukčních staviv na energetickou náročnost budovy: Computational assessment of structural building materials in terms of energy performance of the building. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/70489

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Křenek, Daniel. “Výpočtové hodnocení konstrukčních staviv na energetickou náročnost budovy: Computational assessment of structural building materials in terms of energy performance of the building.” 2019. Thesis, Brno University of Technology. Accessed March 07, 2021. http://hdl.handle.net/11012/70489.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Křenek, Daniel. “Výpočtové hodnocení konstrukčních staviv na energetickou náročnost budovy: Computational assessment of structural building materials in terms of energy performance of the building.” 2019. Web. 07 Mar 2021.

Vancouver:

Křenek D. Výpočtové hodnocení konstrukčních staviv na energetickou náročnost budovy: Computational assessment of structural building materials in terms of energy performance of the building. [Internet] [Thesis]. Brno University of Technology; 2019. [cited 2021 Mar 07]. Available from: http://hdl.handle.net/11012/70489.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Křenek D. Výpočtové hodnocení konstrukčních staviv na energetickou náročnost budovy: Computational assessment of structural building materials in terms of energy performance of the building. [Thesis]. Brno University of Technology; 2019. Available from: http://hdl.handle.net/11012/70489

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

McMaster University

22. Fernando, Chandula. Indirect Consequences of Exposure to Radiation in Doses Relevant to Nuclear Incidents and Accidents.

Degree: MSc, 2018, McMaster University

URL: http://hdl.handle.net/11375/24135

►

At low doses, relevant to nuclear incidents and accidental releases of radioactivity, the detriment of radiation extends beyond direct effects. This thesis investigates genomic instability,… (more)

Subjects/Keywords: low dose radiation; alpha particles; surviving fractions; linear energy transfer; LET; genomic instability; bystander effects; low dose hyper-radiosensitivity; increased radioresistance; HRS; IRS; radium; ra-226; human keratinocyte; cell line; HaCaT; Chinook salmon; CHSE-214; CHSE/F; relative biological effect; RBE; progeny; lethal mutations; monte carlo; dose-response relationship; radiation exposure; radiation weighting factors; non-targeted effects; NTE; non-human biota; protection

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Fernando, C. (2018). Indirect Consequences of Exposure to Radiation in Doses Relevant to Nuclear Incidents and Accidents. (Masters Thesis). McMaster University. Retrieved from http://hdl.handle.net/11375/24135

Chicago Manual of Style (16^th Edition):

Fernando, Chandula. “Indirect Consequences of Exposure to Radiation in Doses Relevant to Nuclear Incidents and Accidents.” 2018. Masters Thesis, McMaster University. Accessed March 07, 2021. http://hdl.handle.net/11375/24135.

MLA Handbook (7^th Edition):

Fernando, Chandula. “Indirect Consequences of Exposure to Radiation in Doses Relevant to Nuclear Incidents and Accidents.” 2018. Web. 07 Mar 2021.

Vancouver:

Fernando C. Indirect Consequences of Exposure to Radiation in Doses Relevant to Nuclear Incidents and Accidents. [Internet] [Masters thesis]. McMaster University; 2018. [cited 2021 Mar 07]. Available from: http://hdl.handle.net/11375/24135.

Council of Science Editors:

Fernando C. Indirect Consequences of Exposure to Radiation in Doses Relevant to Nuclear Incidents and Accidents. [Masters Thesis]. McMaster University; 2018. Available from: http://hdl.handle.net/11375/24135

23. Wang, Yanbin. Exciton Harvesting in Ternary Blend Polymer Solar Cells : 3元ブレンド型高分子太陽電池における励起子捕集.

Degree: 博士(工学), 2014, Kyoto University / 京都大学

URL: http://hdl.handle.net/2433/192193 ; http://dx.doi.org/10.14989/doctor.k18593

新制・課程博士

甲第18593号

工博第3954号

Subjects/Keywords: polymer solar cells; ternary blend; energy transfer; low-bandgap polymer; near-IR sensitization; exciton diffusion length

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Wang, Y. (2014). Exciton Harvesting in Ternary Blend Polymer Solar Cells : 3元ブレンド型高分子太陽電池における励起子捕集. (Thesis). Kyoto University / 京都大学. Retrieved from http://hdl.handle.net/2433/192193 ; http://dx.doi.org/10.14989/doctor.k18593

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Wang, Yanbin. “Exciton Harvesting in Ternary Blend Polymer Solar Cells : 3元ブレンド型高分子太陽電池における励起子捕集.” 2014. Thesis, Kyoto University / 京都大学. Accessed March 07, 2021. http://hdl.handle.net/2433/192193 ; http://dx.doi.org/10.14989/doctor.k18593.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Wang, Yanbin. “Exciton Harvesting in Ternary Blend Polymer Solar Cells : 3元ブレンド型高分子太陽電池における励起子捕集.” 2014. Web. 07 Mar 2021.

Vancouver:

Wang Y. Exciton Harvesting in Ternary Blend Polymer Solar Cells : 3元ブレンド型高分子太陽電池における励起子捕集. [Internet] [Thesis]. Kyoto University / 京都大学; 2014. [cited 2021 Mar 07]. Available from: http://hdl.handle.net/2433/192193 ; http://dx.doi.org/10.14989/doctor.k18593.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Wang Y. Exciton Harvesting in Ternary Blend Polymer Solar Cells : 3元ブレンド型高分子太陽電池における励起子捕集. [Thesis]. Kyoto University / 京都大学; 2014. Available from: http://hdl.handle.net/2433/192193 ; http://dx.doi.org/10.14989/doctor.k18593

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

24. Rodler, Auline. Modélisation dynamique tridimensionnelle avec tache solaire pour la simulation du comportement thermique d’un bâtiment basse consommation : A three dimensional thermal room and sun patch model to simulate the transient behaviour of an energy efficient building.

Degree: Docteur es, Génie civil, 2014, INSA Lyon

URL: http://www.theses.fr/2014ISAL0106

►

Cette thèse s’inscrit dans le contexte du développement de Bâtiments Basse Consommation. La conception de telles constructions les rend sensibles aux sollicitations internes. Aussi, les… (more)

▼

Cette thèse s’inscrit dans le contexte du développement de Bâtiments Basse Consommation. La conception de telles constructions les rend sensibles aux sollicitations internes. Aussi, les outils de thermique du bâtiment existants ne sont pas adaptés pour simuler assez fidèlement ce type de bâtiments, si bien qu’un modèle tridimensionnel et dynamique a été développé ici. Celui-ci présente plusieurs particularités : il s’appuie sur une discrétisation spatiale optimisée des parois, la tache solaire y est localisée et l’intégration des dynamiques des conditions environnementales est assurée par un solveur numérique à pas de temps adaptatif et un seul nœud d’air est considéré. La validation du modèle s’est suivant une confrontation avec des mesures en conditions réelles réalisées dans une cellule de BESTlab d’EDF R&D. Un suivi visuel de la tache solaire a permis de confirmer sa bonne localisation par notre modèle. Des mesures de température en surface complétées par des cartographies thermographiques ont été comparées aux champs de températures simulés, montrant une bonne concordance. Les comparaisons de températures d’air mesurées et simulées ont montré des résidus ne dépassant pas 1,5 ˚C, pour des erreurs moyennes de 0,5 ˚C. La pertinence des deux principales innovations du modèle a été ensuite démontrée : l’utilisation d’entrées échantillonnées à la minute associées à un solveur à pas de temps adaptatif permet de minimiser les erreurs de simulation : en mi-saison, les résidus maximaux sont respectivement de 1 ˚C et 2 ˚C pour des entrées à la minute et à l’heure. En hiver, les températures d’air simulées tendent à plus osciller autour de la consigne quand le pas d’échantillonnage des entrées s’allonge. Deux modèles unidimensionnels, représentatifs de modèles courants, M1D,sol diluant le rayonnement solaire sur le sol seul et M1D,parois le distribuant de façon homogène sur les parois au prorata de la taille de la tache solaire censée les frappées, ne dégradent que légèrement la précision des calculs de température d’air. Cependant, ces modèles 1D ne permettent pas de calcul des champs de températures sur les parois si bien qu’ils présentent des erreurs locales dépassant 20 ˚C aux endroits touchés par la tache solaire. Enfin en hiver, le modèle 3D permet de prédire des consommations de chauffage surestimées de 6,5 % quand M 1D,parois les surestime de 11 % et M1D,sol de 22 %. Les améliorations apportées par notre modèle ont été confirmées pour d’autres types de cellules. D’ailleurs des écarts plus importants entre M1D,sol et le modèle 3D ont été observés pour une cellule dont parois et sol ont des compositions très différentes, alors que l’orientation a aussi un impact. Ce travail confirme la nécessité de représenter plus finement les phénomènes physiques pour des locaux fortement isolés. Des améliorations sont à intégrer, comme la description de l’anisothermie de l’air.

Low energy building constructions become sensitive to internal gains : any internal heating source has an impact on the envelope. Therefore, it is…

Advisors/Committee Members: Virgone, Joseph (thesis director).

Subjects/Keywords: Thermique des bâtiments; Bâtiment basse consommation; Modélisation tridimensionnelle; Transfert de chaleur; Tâche solaire; Sollicitation rapide; Confort; Inertie; Validation du modèle; Building physics; Low energy building; 3D modelisation; Heat transfer; Sun patch; Fast variation; Comfort; Thermal mass; Model validation; 697.001 072

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Rodler, A. (2014). Modélisation dynamique tridimensionnelle avec tache solaire pour la simulation du comportement thermique d’un bâtiment basse consommation : A three dimensional thermal room and sun patch model to simulate the transient behaviour of an energy efficient building. (Doctoral Dissertation). INSA Lyon. Retrieved from http://www.theses.fr/2014ISAL0106

Chicago Manual of Style (16^th Edition):

Rodler, Auline. “Modélisation dynamique tridimensionnelle avec tache solaire pour la simulation du comportement thermique d’un bâtiment basse consommation : A three dimensional thermal room and sun patch model to simulate the transient behaviour of an energy efficient building.” 2014. Doctoral Dissertation, INSA Lyon. Accessed March 07, 2021. http://www.theses.fr/2014ISAL0106.

MLA Handbook (7^th Edition):

Rodler, Auline. “Modélisation dynamique tridimensionnelle avec tache solaire pour la simulation du comportement thermique d’un bâtiment basse consommation : A three dimensional thermal room and sun patch model to simulate the transient behaviour of an energy efficient building.” 2014. Web. 07 Mar 2021.

Vancouver:

Rodler A. Modélisation dynamique tridimensionnelle avec tache solaire pour la simulation du comportement thermique d’un bâtiment basse consommation : A three dimensional thermal room and sun patch model to simulate the transient behaviour of an energy efficient building. [Internet] [Doctoral dissertation]. INSA Lyon; 2014. [cited 2021 Mar 07]. Available from: http://www.theses.fr/2014ISAL0106.

Council of Science Editors:

Rodler A. Modélisation dynamique tridimensionnelle avec tache solaire pour la simulation du comportement thermique d’un bâtiment basse consommation : A three dimensional thermal room and sun patch model to simulate the transient behaviour of an energy efficient building. [Doctoral Dissertation]. INSA Lyon; 2014. Available from: http://www.theses.fr/2014ISAL0106

Vrije Universiteit Amsterdam

25. Weij - de Wit, C.D. van der. Excitation Energy Transfer in Large, Intact Photosynthetic Systems .

Degree: 2007, Vrije Universiteit Amsterdam

URL: http://hdl.handle.net/1871/33442

Subjects/Keywords: photosynthesis; energy transfer; photosystem; PSII core; BBY; time-resolved fluorescence; low temperature; target analysis; cryptophyte; IsiA

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Weij - de Wit, C. D. v. d. (2007). Excitation Energy Transfer in Large, Intact Photosynthetic Systems . (Doctoral Dissertation). Vrije Universiteit Amsterdam. Retrieved from http://hdl.handle.net/1871/33442

Chicago Manual of Style (16^th Edition):

Weij - de Wit, C D van der. “Excitation Energy Transfer in Large, Intact Photosynthetic Systems .” 2007. Doctoral Dissertation, Vrije Universiteit Amsterdam. Accessed March 07, 2021. http://hdl.handle.net/1871/33442.

MLA Handbook (7^th Edition):

Weij - de Wit, C D van der. “Excitation Energy Transfer in Large, Intact Photosynthetic Systems .” 2007. Web. 07 Mar 2021.

Vancouver:

Weij - de Wit CDvd. Excitation Energy Transfer in Large, Intact Photosynthetic Systems . [Internet] [Doctoral dissertation]. Vrije Universiteit Amsterdam; 2007. [cited 2021 Mar 07]. Available from: http://hdl.handle.net/1871/33442.

Council of Science Editors:

Weij - de Wit CDvd. Excitation Energy Transfer in Large, Intact Photosynthetic Systems . [Doctoral Dissertation]. Vrije Universiteit Amsterdam; 2007. Available from: http://hdl.handle.net/1871/33442

26. Rahmani, Hamed. Integrated Electromagnetic Wireless Power Harvesting System for mm-size Biomedical Implants.

Degree: MS, Engineering, 2017, Rice University

URL: http://hdl.handle.net/1911/96132

► Rising demand for continuous monitoring of human body and health care devices in recent years has resulted in the development of implantable biopotential sensors. Infection… (more)

Subjects/Keywords: Wireless power transfer; Implantable devices; CMOS; On-chip antenna; Energy harvesting; Ultra-low power sensors

…Electromagnetic energy transfer has been broadly used in the design of energy harvesting biomedical… …Magnetic field has been more popular for energy transfer through biological tissues since… …low Power Biomedical Implantable Device The energy harvesting system is composed of an on… …Transfer Efficiency (PTE). An analytic calculation in [28] reveals that a low… …minimized. The energy transfer from the TX antenna to the receiving antenna can be formulated in…

10 more images…

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Rahmani, H. (2017). Integrated Electromagnetic Wireless Power Harvesting System for mm-size Biomedical Implants. (Masters Thesis). Rice University. Retrieved from http://hdl.handle.net/1911/96132

Chicago Manual of Style (16^th Edition):

Rahmani, Hamed. “Integrated Electromagnetic Wireless Power Harvesting System for mm-size Biomedical Implants.” 2017. Masters Thesis, Rice University. Accessed March 07, 2021. http://hdl.handle.net/1911/96132.

MLA Handbook (7^th Edition):

Rahmani, Hamed. “Integrated Electromagnetic Wireless Power Harvesting System for mm-size Biomedical Implants.” 2017. Web. 07 Mar 2021.

Vancouver:

Rahmani H. Integrated Electromagnetic Wireless Power Harvesting System for mm-size Biomedical Implants. [Internet] [Masters thesis]. Rice University; 2017. [cited 2021 Mar 07]. Available from: http://hdl.handle.net/1911/96132.

Council of Science Editors:

Rahmani H. Integrated Electromagnetic Wireless Power Harvesting System for mm-size Biomedical Implants. [Masters Thesis]. Rice University; 2017. Available from: http://hdl.handle.net/1911/96132

University of Oulu

27. Alcaraz López, O. L. (Onel Luis). Resource allocation for machine-type communication:from massive connectivity to ultra-reliable low-latency.

Degree: 2020, University of Oulu

URL: http://urn.fi/urn:isbn:9789526225784

►

Abstract Machine-Type Communication (MTC) is an integral use case for future generation of cellular networks, where fully automated data generation, exchange, processing and actuation among… (more)

▼

Abstract Machine-Type Communication (MTC) is an integral use case for future generation of cellular networks, where fully automated data generation, exchange, processing and actuation among intelligent machines is foreseen. The objective of this thesis is to develop and analyze resource allocation strategies to efficiently meet the stringent requirements of diverse MTC scenarios. We exploit the concepts of power control, rate allocation, relaying cooperation, spatial diversity, aggregation and Non-Orthogonal Multiple Access (NOMA), in the context of such new and challenging scenarios. An overarching objective is to carry out both theoretical performance analysis and algorithm development of the proposed strategies, while focusing on three relevant MTC scenarios. First, we analyze interference-free setups where Machine-Type Devices (MTDs) are powered via Wireless Energy Transfer (WET). Several mechanisms are proposed and analyzed for enabling Ultra-Reliable Low-Latency Communications (URLLC). Second, we propose power and rate control strategies for large-scale interference-limited networks under reliability and delay constraints. We explore Orthogonal Multiple Access (OMA) and NOMA schemes, for which our proposed schemes depend only on the target reliability and latency, and on average statistics of the signal and interference. Third, we analyze data aggregation and resource scheduling mechanisms for massive MTC (mMTC). We propose NOMA and develop an analytical framework based on Stochastic Geometry to investigate its performance. For the scenario on which MTDs are powered via WET, we propose Channel State Information (CSI)-free multiple-antenna strategies to power the massive set of MTDs. All in all, our proposed techniques were demonstrated to have great potential to improve performance metrics such as reliability, latency, energy efficiency and scalability with respect to the number of simultaneously served devices. We expect that our novel ideas influence the development and implementation of new and more sophisticated strategies for coping with the increasingly growing quality of service demands of future networks.

Tiivistelmä Konetyyppinen tietoliikenne (MTC) on tärkeä käyttökohde tulevaisuuden langattomissa verkoissa sisältäen täysautomaattisen datan generoinnin, siirron, prosessoinnin ja aktivoinnin älykkäiden koneiden kesken. Väitöskirjan tavoitteena on kehittää ja analysoida tiukkoihin ja suuresti vaihteleviin vaatimuksiin soveltuvia MTC-resurssiallokaatiostrategioita. Työssä käytetään tehon ja datanopeuden säätöä, yhteistoiminnallista releointia, tilatason diversiteettiä, datan yhdistelyä ja epäortogonaalista monikäyttöä (NOMA) uusiin ja haastaviin tarpeisiin. Työn läpiluotaavana teemana on suorittaa teoreettista suorituskykyarviointia ja algoritmikehitystä esitetyille strategioille keskittymällä kolmeen olennaiseen MTC-käyttökohteeseen. Aluksi analysoidaan häiriövapaita järjestelmiä, joissa MTC-laitteet hankkivat energiansa langattomasti (WET). Työssä esitetään ja analysoidaan useita mekanismeja…

Advisors/Committee Members: Latva-aho, M. (Matti), Alves, H. (Hirley).

Subjects/Keywords: Channel State Information-free; Non-Orthogonal Multiple Access; Stochastic Geometry; Ultra-Reliable Low-Latency Communications; Wireless Energy Transfer; diversity schemes; massive Machine-Type Communication; resource allocation; diversiteettimenetelmät; epäortogonaalinen monikäyttö; erittäin luotettava pienen latenssin tiedonsiirto; kanavatilatietovapaa; langaton energian siirto; massiivinen konetyyppinen tietoliikenne; resurssiallokaatio; stokastinen geometria

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Alcaraz López, O. L. (. L. (2020). Resource allocation for machine-type communication:from massive connectivity to ultra-reliable low-latency. (Doctoral Dissertation). University of Oulu. Retrieved from http://urn.fi/urn:isbn:9789526225784

Chicago Manual of Style (16^th Edition):

Alcaraz López, O L (Onel Luis). “Resource allocation for machine-type communication:from massive connectivity to ultra-reliable low-latency.” 2020. Doctoral Dissertation, University of Oulu. Accessed March 07, 2021. http://urn.fi/urn:isbn:9789526225784.

MLA Handbook (7^th Edition):

Alcaraz López, O L (Onel Luis). “Resource allocation for machine-type communication:from massive connectivity to ultra-reliable low-latency.” 2020. Web. 07 Mar 2021.

Vancouver:

Alcaraz López OL(L. Resource allocation for machine-type communication:from massive connectivity to ultra-reliable low-latency. [Internet] [Doctoral dissertation]. University of Oulu; 2020. [cited 2021 Mar 07]. Available from: http://urn.fi/urn:isbn:9789526225784.

Council of Science Editors:

Alcaraz López OL(L. Resource allocation for machine-type communication:from massive connectivity to ultra-reliable low-latency. [Doctoral Dissertation]. University of Oulu; 2020. Available from: http://urn.fi/urn:isbn:9789526225784

28. Wang, Yanbin. Exciton Harvesting in Ternary Blend Polymer Solar Cells .

Degree: 2014, Kyoto University

URL: http://hdl.handle.net/2433/192193

Subjects/Keywords: polymer solar cells; ternary blend; energy transfer; low-bandgap polymer; near-IR sensitization; exciton diffusion length

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Wang, Y. (2014). Exciton Harvesting in Ternary Blend Polymer Solar Cells . (Thesis). Kyoto University. Retrieved from http://hdl.handle.net/2433/192193

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Wang, Yanbin. “Exciton Harvesting in Ternary Blend Polymer Solar Cells .” 2014. Thesis, Kyoto University. Accessed March 07, 2021. http://hdl.handle.net/2433/192193.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Wang, Yanbin. “Exciton Harvesting in Ternary Blend Polymer Solar Cells .” 2014. Web. 07 Mar 2021.

Vancouver:

Wang Y. Exciton Harvesting in Ternary Blend Polymer Solar Cells . [Internet] [Thesis]. Kyoto University; 2014. [cited 2021 Mar 07]. Available from: http://hdl.handle.net/2433/192193.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Wang Y. Exciton Harvesting in Ternary Blend Polymer Solar Cells . [Thesis]. Kyoto University; 2014. Available from: http://hdl.handle.net/2433/192193

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

29. van der Weij - de Wit, C.D. Excitation Energy Transfer in Large, Intact Photosynthetic Systems.

Degree: Faculty of Earth and Life Sciences, 2007, NARCIS

URL: https://research.vu.nl/en/publications/91151530-e5f0-49c4-8538-6c200b704cf3 ; urn:nbn:nl:ui:31-1871/33442 ; 91151530-e5f0-49c4-8538-6c200b704cf3 ; 1871/33442 ; urn:nbn:nl:ui:31-1871/33442 ; https://research.vu.nl/en/publications/91151530-e5f0-49c4-8538-6c200b704cf3

Subjects/Keywords: BBY; IsiA; PSII core; cryptophyte; energy transfer; low temperature; photosynthesis; photosystem; target analysis; time-resolved fluorescence

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

van der Weij - de Wit, C. D. (2007). Excitation Energy Transfer in Large, Intact Photosynthetic Systems. (Doctoral Dissertation). NARCIS. Retrieved from https://research.vu.nl/en/publications/91151530-e5f0-49c4-8538-6c200b704cf3 ; urn:nbn:nl:ui:31-1871/33442 ; 91151530-e5f0-49c4-8538-6c200b704cf3 ; 1871/33442 ; urn:nbn:nl:ui:31-1871/33442 ; https://research.vu.nl/en/publications/91151530-e5f0-49c4-8538-6c200b704cf3

Chicago Manual of Style (16^th Edition):

van der Weij - de Wit, C D. “Excitation Energy Transfer in Large, Intact Photosynthetic Systems.” 2007. Doctoral Dissertation, NARCIS. Accessed March 07, 2021. https://research.vu.nl/en/publications/91151530-e5f0-49c4-8538-6c200b704cf3 ; urn:nbn:nl:ui:31-1871/33442 ; 91151530-e5f0-49c4-8538-6c200b704cf3 ; 1871/33442 ; urn:nbn:nl:ui:31-1871/33442 ; https://research.vu.nl/en/publications/91151530-e5f0-49c4-8538-6c200b704cf3.

MLA Handbook (7^th Edition):

van der Weij - de Wit, C D. “Excitation Energy Transfer in Large, Intact Photosynthetic Systems.” 2007. Web. 07 Mar 2021.

Vancouver:

van der Weij - de Wit CD. Excitation Energy Transfer in Large, Intact Photosynthetic Systems. [Internet] [Doctoral dissertation]. NARCIS; 2007. [cited 2021 Mar 07]. Available from: https://research.vu.nl/en/publications/91151530-e5f0-49c4-8538-6c200b704cf3 ; urn:nbn:nl:ui:31-1871/33442 ; 91151530-e5f0-49c4-8538-6c200b704cf3 ; 1871/33442 ; urn:nbn:nl:ui:31-1871/33442 ; https://research.vu.nl/en/publications/91151530-e5f0-49c4-8538-6c200b704cf3.

Council of Science Editors:

van der Weij - de Wit CD. Excitation Energy Transfer in Large, Intact Photosynthetic Systems. [Doctoral Dissertation]. NARCIS; 2007. Available from: https://research.vu.nl/en/publications/91151530-e5f0-49c4-8538-6c200b704cf3 ; urn:nbn:nl:ui:31-1871/33442 ; 91151530-e5f0-49c4-8538-6c200b704cf3 ; 1871/33442 ; urn:nbn:nl:ui:31-1871/33442 ; https://research.vu.nl/en/publications/91151530-e5f0-49c4-8538-6c200b704cf3

30. Landelle, Arnaud. Experimental and numerical study of transcritical Organic Rankine Cycles for low-grade heat conversion into electricity from various sources : Caractérisation expérimentale et modélisation d'une machine ORC Transcritique pour la production électrique à partir de diverses sources de chaleur basse température.

Degree: Docteur es, Thermique énergétique, 2017, Lyon

URL: http://www.theses.fr/2017LYSEI090

►

Le Cycle Organique de Rankine (abrégé ORC de l’anglais Organic Rankine Cycle) est une technologie permettant la conversion de chaleur basse température en électricité. L’ORC… (more)

▼

Le Cycle Organique de Rankine (abrégé ORC de l’anglais Organic Rankine Cycle) est une technologie permettant la conversion de chaleur basse température en électricité. L’ORC transcritique a été identifié comme une solution prometteuse pour la valorisation de la chaleur fatale. Cependant, peu d’installations expérimentales ont permis de confirmer ces performances. Ce travail de thèse présente le fonctionnement et l’optimisation d’ORC sous-critique et transcritique pour la conversion de chaleur basse température en électricité à partir de différentes sources. Premièrement, les contextes thermodynamique et technologique de l’ORC sont présentés. Des critères de performance énergétiques et exergétiques sont définis et appliqués à une base de données d’installations expérimentales afin d’exposer l’état de l’art actuel des ORC. Deuxièmement, les outils numériques et expérimentaux, spécifiquement développés ou utilisé pour ces travaux, sont présentés. Trois installations expérimentales d’ORC transcritique complet ou incomplet fournissent les données expérimentales. Différents modèles numériques sont utilisés : sous l’environnement Matlab pour la modélisation en permanent, l’analyse des données expérimentales et l’analyse énergétique/exergétique ; L’environnement Modelica/Dymola pour l’analyse des transitoires et de la dynamique du système. Dans un troisième temps, ces différents outils sont utilisés pour étudier quatre différentes problématiques : - Le fonctionnement de la pompe de circulation est étudié, d’un point de vue énergétique et volumétrique. Des modèles semi-empiriques et des corrélations de performance sont présentés. - Les transferts thermiques en supercritique sont examinés, en local et en global. Les coefficients de transfert thermique sont comparés avec différentes corrélations de la littérature. - L’influence de la charge de réfrigérant sur les performances et le comportement de l’ORC est analysée. La charge optimale est estimée pour différentes conditions de fonctionnement et des mécanismes de régulation de la charge sont présentés. - Les performances énergétiques et exergétiques de l’ORC sont comparées avec la base de données. Une analyse exergétique du procédé a permis d’identifier des voies d’amélioration.

The Organic Rankine Cycle (ORC) is a technology used for low-grade thermal energy conversion into electricity. Transcritical ORC has been identified as a solution for efficient waste heat recovery. However, few experimental tests have been conducted to confirm the interest of transcritical ORC and investigate its operational behaviors. The work presented focuses on the operation and the optimization of subcritical and transcritical Organic Rankine Cycles for low-grade heat conversion into electricity from various heat sources (solar, industrial waste heat). First, the thermodynamic framework of ORC technology is presented. Energetic and exergetic performance criteria, appropriate to each type of input source, are introduced and selected. The criteria are later applied to a database of ORC prototypes,…

Advisors/Committee Members: Revellin, Rémi (thesis director).

Subjects/Keywords: Energétique; Conversion de chaleur; Cycle de Rankine organique; Conversion de chaleur basse température; Performance énergétique; Performance éxergétique; Transferts thermiques; Coefficient de transfert thermique; Transfert de chaleur supercritique; Energetic; Heat conversion; Organic Rankin Cycle; Low temperature heat conversion; Energy performance; Energy performance; Thermal transfert; Thermal transfer coefficient; Supercritical heat transfert; 536.230 72

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Landelle, A. (2017). Experimental and numerical study of transcritical Organic Rankine Cycles for low-grade heat conversion into electricity from various sources : Caractérisation expérimentale et modélisation d'une machine ORC Transcritique pour la production électrique à partir de diverses sources de chaleur basse température. (Doctoral Dissertation). Lyon. Retrieved from http://www.theses.fr/2017LYSEI090

Chicago Manual of Style (16^th Edition):

Landelle, Arnaud. “Experimental and numerical study of transcritical Organic Rankine Cycles for low-grade heat conversion into electricity from various sources : Caractérisation expérimentale et modélisation d'une machine ORC Transcritique pour la production électrique à partir de diverses sources de chaleur basse température.” 2017. Doctoral Dissertation, Lyon. Accessed March 07, 2021. http://www.theses.fr/2017LYSEI090.

MLA Handbook (7^th Edition):

Landelle, Arnaud. “Experimental and numerical study of transcritical Organic Rankine Cycles for low-grade heat conversion into electricity from various sources : Caractérisation expérimentale et modélisation d'une machine ORC Transcritique pour la production électrique à partir de diverses sources de chaleur basse température.” 2017. Web. 07 Mar 2021.

Vancouver:

Landelle A. Experimental and numerical study of transcritical Organic Rankine Cycles for low-grade heat conversion into electricity from various sources : Caractérisation expérimentale et modélisation d'une machine ORC Transcritique pour la production électrique à partir de diverses sources de chaleur basse température. [Internet] [Doctoral dissertation]. Lyon; 2017. [cited 2021 Mar 07]. Available from: http://www.theses.fr/2017LYSEI090.

Council of Science Editors:

Landelle A. Experimental and numerical study of transcritical Organic Rankine Cycles for low-grade heat conversion into electricity from various sources : Caractérisation expérimentale et modélisation d'une machine ORC Transcritique pour la production électrique à partir de diverses sources de chaleur basse température. [Doctoral Dissertation]. Lyon; 2017. Available from: http://www.theses.fr/2017LYSEI090

Open Access Theses and Dissertations