subject:(Full Factorial)

Addis Ababa University

1. Chernet, Tefera. Effect of Blend ratio and Extrusion Operating Conditions on Product Quality of Sorghum/Soybean Extrudate .

Degree: 2014, Addis Ababa University

URL: http://etd.aau.edu.et/dspace/handle/123456789/4961

► In this work, the effects of full fat soybean flour addition and extrusion operating conditions (barrel temperature and feed moisture) on quality characteristics of sorghum… (more)

▼ In this work, the effects of full fat soybean flour addition and extrusion operating conditions (barrel temperature and feed moisture) on quality characteristics of sorghum flour extrudates were studied, with the objective of developing ready-to-eat extruded product. A pilot scale twin screw food extruder was used for the extrusion. Full factorial design was employed to investigate the effect of blend ratio (95:05, 90:10 and 85:15 sorghum and soybean respectively), barrel temperature (120, 135 and 150 °C) and feed moisture levels (14, 16 and 18%) on the physical (radial expansion ratio and bulk density) and functional (water absorption index and water solubility index) properties of the extrudates. Maximum radial expansion ratio (two times) and minimum bulk density extrudate was obtained at 90:10 blend ratio. In addition to this lower blend ratio (95:05) registered lower water absorption index and higher water solubility index. Taking into consideration the extrusion operating conditions, increasing barrel temperature (120-150 °C) and feed moisture (14-18%) decreased the radial expansion ratio and water solubility index while increasing the water absorption index. Later on, the results of the sensory evaluation (color, flavor, texture and overall acceptability) revealed that increased blend ratio, barrel temperature and feed moisture content decreased the level of acceptance yet the results also showed that the extruded product from 90:10 blend ratio, 120 °C barrel temperature and 14% feed moisture is still an acceptable product with an overall acceptability of 7.1. It was then demonstrated from the optimization result that it is possible to produce good extruded product. The extruded product from 91.8:8.2 (sorghum and soybean respectively), 120 °C barrel temperature and 14% feed moisture was selected as best formulation to yield a protein rich extruded product with desirable attributes like higher radial expansion ratio (2.02), lower bulk density (0.072), higher water absorption index (4.53) and higher sensory acceptability (7.327). Advisors/Committee Members: Ato Solomon Bogale (advisor).

Subjects/Keywords: Sorghum flour; Soybean flour; Extrusion cooking; Full factorial

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Chernet, T. (2014). Effect of Blend ratio and Extrusion Operating Conditions on Product Quality of Sorghum/Soybean Extrudate . (Thesis). Addis Ababa University. Retrieved from http://etd.aau.edu.et/dspace/handle/123456789/4961

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Chernet, Tefera. “Effect of Blend ratio and Extrusion Operating Conditions on Product Quality of Sorghum/Soybean Extrudate .” 2014. Thesis, Addis Ababa University. Accessed April 11, 2021. http://etd.aau.edu.et/dspace/handle/123456789/4961.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Chernet, Tefera. “Effect of Blend ratio and Extrusion Operating Conditions on Product Quality of Sorghum/Soybean Extrudate .” 2014. Web. 11 Apr 2021.

Vancouver:

Chernet T. Effect of Blend ratio and Extrusion Operating Conditions on Product Quality of Sorghum/Soybean Extrudate . [Internet] [Thesis]. Addis Ababa University; 2014. [cited 2021 Apr 11]. Available from: http://etd.aau.edu.et/dspace/handle/123456789/4961.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Chernet T. Effect of Blend ratio and Extrusion Operating Conditions on Product Quality of Sorghum/Soybean Extrudate . [Thesis]. Addis Ababa University; 2014. Available from: http://etd.aau.edu.et/dspace/handle/123456789/4961

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

University of Hawaii – Manoa

2. Drielak, Edward. Investigation of Factors Affecting the Dilute Acid Pretreatment of Napier Grass Using a Full Factorial Statistical Approach.

Degree: 2017, University of Hawaii – Manoa

URL: http://hdl.handle.net/10125/51162

►

M.S. University of Hawaii at Manoa 2015.

Recent concerns over economic and environmental issues associated with fossil-based fuels and products usage have sparked interest in… (more)

Subjects/Keywords: Napier grass; Dilute acid pretreatment; Full factorial; Biofuel; Green processing

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Drielak, E. (2017). Investigation of Factors Affecting the Dilute Acid Pretreatment of Napier Grass Using a Full Factorial Statistical Approach. (Thesis). University of Hawaii – Manoa. Retrieved from http://hdl.handle.net/10125/51162

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Drielak, Edward. “Investigation of Factors Affecting the Dilute Acid Pretreatment of Napier Grass Using a Full Factorial Statistical Approach.” 2017. Thesis, University of Hawaii – Manoa. Accessed April 11, 2021. http://hdl.handle.net/10125/51162.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Drielak, Edward. “Investigation of Factors Affecting the Dilute Acid Pretreatment of Napier Grass Using a Full Factorial Statistical Approach.” 2017. Web. 11 Apr 2021.

Vancouver:

Drielak E. Investigation of Factors Affecting the Dilute Acid Pretreatment of Napier Grass Using a Full Factorial Statistical Approach. [Internet] [Thesis]. University of Hawaii – Manoa; 2017. [cited 2021 Apr 11]. Available from: http://hdl.handle.net/10125/51162.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Drielak E. Investigation of Factors Affecting the Dilute Acid Pretreatment of Napier Grass Using a Full Factorial Statistical Approach. [Thesis]. University of Hawaii – Manoa; 2017. Available from: http://hdl.handle.net/10125/51162

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

NSYSU

3. Cho, Che-an. Enhancing saccharification of phytoremediation biomass using both dilute acid hydrolysis and microwave absorbing materials in the microwave system.

Degree: Master, Environmental Engineering, 2014, NSYSU

URL: http://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0729114-151353

► In this study, revegetation of plants (Bagasse, Miscanthus floridulus and Eichhornia crassipes) was assessed to be starting as materials for producing bioethanol. The method of… (more)

▼ In this study, revegetation of plants (Bagasse, Miscanthus floridulus and Eichhornia crassipes) was assessed to be starting as materials for producing bioethanol. The method of full factorial experimental design is used to explore different parameters on conversion rates for hydrolysis reaction of fiber into fermentation sugars and analysis the influence of the reaction temperature, hydrolysis time, solvent volume, dilute sulfuric acid concentration and plant species on fermentation sugars. The hydrolysis reduces the effect of improving the reaction time by using the microwave system with absorbing materials. The fibers were observed the residue surface and structural changes after hydrolysis from the X-ray Diffractometer (XRD), Fourier Transform Infrared Spectrometry (FTIR) and Environment Scanning Electron Micrograph (ESEM). Therefore, it can be proved that the increase in saccharification rate can lead to the impact in destroyed and reduce of the cellulose structure presents. The result shows that the order of effect for reaction temperature, hydrolysis time, dilute sulfuric acid concentration and solvent volume for fiber of water hyacinth was investigated by the method of full factorial experimental design under the operational condition of 100â reaction temperature, 30 min hydrolysis time, 30 mL solvent volume and 3% dilute sulfuric acid concentration. Using the bagasse, miscanthus and mater hyacinth as the raw material, the best operational condition for optimal sugar concentration was about 6520 mg/L, 5680 mg/L and 4650 mg/L. The saccharification rate was about 19.58%, 17.05% and 13.94%. Comparing with these three raw materials, sugar crops bagasse has the best effect. From the analysis of the ESEM, XRD and FTIR, the cellulose will increase as the change of saccharification rate. And it can effectively enhance the saccharification rate and reduce approximately 32% to 40% of reaction time by microwave system with nanoscale iron oxide absorbing materials. Advisors/Committee Members: Wen-Liang (chair), Shu-Fen Cheng (chair), Tzi-yi Wu (chair), Yuan-Chung Lin (committee member), Houng-Yung Chen. (chair).

Subjects/Keywords: Microwave; Phytoremediation biomass; Dilute acid pretreatment; Microwave absorbing materials; Full factorial experimental design; Bioethanol

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Cho, C. (2014). Enhancing saccharification of phytoremediation biomass using both dilute acid hydrolysis and microwave absorbing materials in the microwave system. (Thesis). NSYSU. Retrieved from http://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0729114-151353

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Cho, Che-an. “Enhancing saccharification of phytoremediation biomass using both dilute acid hydrolysis and microwave absorbing materials in the microwave system.” 2014. Thesis, NSYSU. Accessed April 11, 2021. http://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0729114-151353.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Cho, Che-an. “Enhancing saccharification of phytoremediation biomass using both dilute acid hydrolysis and microwave absorbing materials in the microwave system.” 2014. Web. 11 Apr 2021.

Vancouver:

Cho C. Enhancing saccharification of phytoremediation biomass using both dilute acid hydrolysis and microwave absorbing materials in the microwave system. [Internet] [Thesis]. NSYSU; 2014. [cited 2021 Apr 11]. Available from: http://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0729114-151353.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Cho C. Enhancing saccharification of phytoremediation biomass using both dilute acid hydrolysis and microwave absorbing materials in the microwave system. [Thesis]. NSYSU; 2014. Available from: http://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0729114-151353

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Western Kentucky University

4. Alavi, Farshid. Optimization of Process Parameters in Micro Electrical Discharge Machining (EDM) of TI-6AL-4V Alloy.

Degree: MS, Department of Architectural and Manufacturing Sciences, 2016, Western Kentucky University

URL: https://digitalcommons.wku.edu/theses/1568

► Ti-6Al-4V has a wide range of applications such as in the automotive and aerospace industries. Nevertheless, titanium alloys are very difficult to machine by… (more)

▼ Ti-6Al-4V has a wide range of applications such as in the automotive and aerospace industries. Nevertheless, titanium alloys are very difficult to machine by conventional methods. Micro-EDM is a non-conventional machining method that uses the thermal effect of precisely controlled sparks. Manufacturers are looking for the methods and optimal settings to increase the productivity of micro-EDM in terms of lessening machining time and tool wear. Moreover, surface integrity of the machined area is crucial for some products such as biomedical implants. The objective of this study was to investigate the effects of the micro-EDM process parameters on response variables, in order to understand the behavior of each parameter as well as to determine their optimal values. Although, there is a substantial amount of literature studying different aspects of micro-EDM, most of them were designed based on the one-factor-at-a-time experiments instead of studying all factors, simultaneously. This research was conducted through a series of experiments using a full factorial design. An analysis of variance was employed to analyze the findings and to determine the effect and significance of each process parameters on the response variables. The process parameters included voltage, capacitance, electrode rotational speed, and electrode coating. Voltage and capacitance were studied separately as well as in combination in terms of the discharge energy. Response variables consisted of machining time, tool wear, crater size, microhardness, and element characterization. The surface morphology and element characterization were studied through the application of SEM and EDS analysis. The findings indicated that voltage had a decreasing effect on machining time, while it increased the crater size. Capacitance decreased machining time and tool wear. It had an increasing effect on the surface hardness. The effects of the TN-coating and electrode rotational speed were not statistically significant. Voltage and capacitance were the only parameters affecting element characterization. The affected elements included Ti, Al, C, and W. The optimal process parameters for two sets of response variables were determined using Minitab 17. Advisors/Committee Members: Dr. Muhammad Jahan (director), Dr. Daniel Jackson, Dr. Mark Doggett.

Subjects/Keywords: Micro-EDM - Titanium alloy - Optimization - Full factorial design; Industrial Technology; Manufacturing; Materials Science and Engineering

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Alavi, F. (2016). Optimization of Process Parameters in Micro Electrical Discharge Machining (EDM) of TI-6AL-4V Alloy. (Masters Thesis). Western Kentucky University. Retrieved from https://digitalcommons.wku.edu/theses/1568

Chicago Manual of Style (16^th Edition):

Alavi, Farshid. “Optimization of Process Parameters in Micro Electrical Discharge Machining (EDM) of TI-6AL-4V Alloy.” 2016. Masters Thesis, Western Kentucky University. Accessed April 11, 2021. https://digitalcommons.wku.edu/theses/1568.

MLA Handbook (7^th Edition):

Alavi, Farshid. “Optimization of Process Parameters in Micro Electrical Discharge Machining (EDM) of TI-6AL-4V Alloy.” 2016. Web. 11 Apr 2021.

Vancouver:

Alavi F. Optimization of Process Parameters in Micro Electrical Discharge Machining (EDM) of TI-6AL-4V Alloy. [Internet] [Masters thesis]. Western Kentucky University; 2016. [cited 2021 Apr 11]. Available from: https://digitalcommons.wku.edu/theses/1568.

Council of Science Editors:

Alavi F. Optimization of Process Parameters in Micro Electrical Discharge Machining (EDM) of TI-6AL-4V Alloy. [Masters Thesis]. Western Kentucky University; 2016. Available from: https://digitalcommons.wku.edu/theses/1568

University of Manitoba

5. Hasan, Mahmudul. Optimization of Typha fibre extraction and properties for composite applications using desirability function analysis.

Degree: Biosystems Engineering, 2019, University of Manitoba

URL: http://hdl.handle.net/1993/34381

► Recent studies on Typha spp. commonly-known as cattail has revealed its prospect of being used as a new source of natural fiber. An investigation was… (more)

Subjects/Keywords: Typha spp.; Cattail fibre; Composite applications; Desirability function analysis; Optimum extraction; Full factorial design

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Hasan, M. (2019). Optimization of Typha fibre extraction and properties for composite applications using desirability function analysis. (Masters Thesis). University of Manitoba. Retrieved from http://hdl.handle.net/1993/34381

Chicago Manual of Style (16^th Edition):

Hasan, Mahmudul. “Optimization of Typha fibre extraction and properties for composite applications using desirability function analysis.” 2019. Masters Thesis, University of Manitoba. Accessed April 11, 2021. http://hdl.handle.net/1993/34381.

MLA Handbook (7^th Edition):

Hasan, Mahmudul. “Optimization of Typha fibre extraction and properties for composite applications using desirability function analysis.” 2019. Web. 11 Apr 2021.

Vancouver:

Hasan M. Optimization of Typha fibre extraction and properties for composite applications using desirability function analysis. [Internet] [Masters thesis]. University of Manitoba; 2019. [cited 2021 Apr 11]. Available from: http://hdl.handle.net/1993/34381.

Council of Science Editors:

Hasan M. Optimization of Typha fibre extraction and properties for composite applications using desirability function analysis. [Masters Thesis]. University of Manitoba; 2019. Available from: http://hdl.handle.net/1993/34381

Univerzitet u Beogradu

6. Jović, Žarko M., 1969-. Hemometrijski pristup u razvoju HPLC/UV i HPLC/MS metoda za određivanje i ispitivanje stabilnosti torasemida i nečistoća.

Degree: Farmaceutski fakultet, 2013, Univerzitet u Beogradu

URL: https://fedorabg.bg.ac.rs/fedora/get/o:5442/bdef:Content/get

►

Farmaceutske nauke - Analitika lekova / Pharmaceutical sciences - Drug analysis

Torasemid je diuretik Henleove petlje sa sličnim dejstvom kao furosemid. Koristi se u stanjima… (more)

▼

Farmaceutske nauke - Analitika lekova / Pharmaceutical sciences - Drug analysis

Torasemid je diuretik Henleove petlje sa sličnim dejstvom kao furosemid. Koristi se u stanjima edema udruženim sa srčanom bolešću, uključujući i plućni edem, kao i u slučajevima oboljenja bubrega i jetre. Takoñe se koristi u tretmanu hipertenzije, samostalno ili u kombinaciji sa drugim antihipertenzivima. Torasemid ostvaruje dejstvo u uzlaznom, debljem kraku Henleove petlje inhibirajući tubularnu reapsorpciju natrijuma (Na+) i hlora (Cl-) ograničavanjem natrijum/hlorid/kalijum prenosnog sistema. U kontroli kvaliteta farmaceutskih proizvoda testovi identifikacije i odreñivanja sadržaja aktivne supstance i nečistoća su veoma važni sa ciljem da se obezbedi visok kvalitet proizvoda, bez promena u hemijskim, farmakološkim ili toksikološkim karakteristikama. Prema ICH smernicama, sve nečistoće prisutne u farmaceutskom doziranom obliku u količini većoj od 0.1% moraju se ispitati. Za istovremeno odreñivanje torasemida i njegovih nečistoća razvijene su nove, osetljive i pouzdane HPLC/UV i HPLC/MS metode. Kompletno hromatografsko ponašanje ispitivanih supstanci i pronalaženje optimalnih hromatografskih uslova ostvareno je uz upotrebu eksperimentalnog dizajna. Frakcioni faktorski dizajn je korišćen za izbor varijabli koji značajno utiču na hromatografsko razdvajanje. Puni faktorski dizajn je korišćen za optimizaciju tih varijabli kako bi se postiglo zadovoljavajuće razdvajanje izmeñu ispitivanih supstanci u najkraćem mogućem vremenu trajanja analize. Nakon toga, obe metode su uspešno validirane u skladu sa ICH smernicama i primenjene za ispitivanje farmaceutskog doziranog oblika, torasemid tableta. Kako u literaturi postoji nedostatak informacija o degradacionom mehanizmu torasemida, to su aktivna farmaceutska supstanca torasemid i farmaceutski dozirani oblik (torasemid tablete) podvrgnuti studijama forsirane degradacije sa ciljem da se identifikuju potencijalni degradacioni proizvodi i ustanovi mogući degradacioni put i sveukupna stabilnost torasemida. Studija je sprovedena u skladu sa ICH smernicama, a uzorci su izlagani uslovima hidrolize (kisele, bazne i neutralne), oksidacije, fotolize i termalne degradacije. Za karakterizaciju nastalih degradacionih proizvoda primenjene su HPLC/UV i HPLC/MSn tehnike. Kvadrupolni i jonski trap maseni analizatori su korišćeni da se ustanovi način fragmentacije degradacionih proizvoda...

Advisors/Committee Members: Živanović, Ljiljana, 1947-.

Subjects/Keywords: Torasemide; Liquid chromatography; Mass spectroscopy; Method validation; Fractional factorial design; Full factorial design; Central composite design; Derringer’s desirability function; Forced degradation; Degradation products

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Jović, Žarko M., 1. (2013). Hemometrijski pristup u razvoju HPLC/UV i HPLC/MS metoda za određivanje i ispitivanje stabilnosti torasemida i nečistoća. (Thesis). Univerzitet u Beogradu. Retrieved from https://fedorabg.bg.ac.rs/fedora/get/o:5442/bdef:Content/get

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Jović, Žarko M., 1969-. “Hemometrijski pristup u razvoju HPLC/UV i HPLC/MS metoda za određivanje i ispitivanje stabilnosti torasemida i nečistoća.” 2013. Thesis, Univerzitet u Beogradu. Accessed April 11, 2021. https://fedorabg.bg.ac.rs/fedora/get/o:5442/bdef:Content/get.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Jović, Žarko M., 1969-. “Hemometrijski pristup u razvoju HPLC/UV i HPLC/MS metoda za određivanje i ispitivanje stabilnosti torasemida i nečistoća.” 2013. Web. 11 Apr 2021.

Vancouver:

Jović, Žarko M. 1. Hemometrijski pristup u razvoju HPLC/UV i HPLC/MS metoda za određivanje i ispitivanje stabilnosti torasemida i nečistoća. [Internet] [Thesis]. Univerzitet u Beogradu; 2013. [cited 2021 Apr 11]. Available from: https://fedorabg.bg.ac.rs/fedora/get/o:5442/bdef:Content/get.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Jović, Žarko M. 1. Hemometrijski pristup u razvoju HPLC/UV i HPLC/MS metoda za određivanje i ispitivanje stabilnosti torasemida i nečistoća. [Thesis]. Univerzitet u Beogradu; 2013. Available from: https://fedorabg.bg.ac.rs/fedora/get/o:5442/bdef:Content/get

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

7. Juliano Pedro Scandolara. Propriedades de argamassas obtidas pela substituição parcial de cimento Portland por rejeitos particulados de tijolos.

Degree: 2010, Universidade do Estado de Santa Catarina

URL: http://www.tede.udesc.br/tde_busca/arquivo.php?codArquivo=2161 ; http://www.tede.udesc.br/tde_busca/arquivo.php?codArquivo=2162 ; http://www.tede.udesc.br/tde_busca/arquivo.php?codArquivo=2163 ; http://www.tede.udesc.br/tde_busca/arquivo.php?codArquivo=2164 ; http://www.tede.udesc.br/tde_busca/arquivo.php?codArquivo=2167 ; http://www.tede.udesc.br/tde_busca/arquivo.php?codArquivo=2168 ; http://www.tede.udesc.br/tde_busca/arquivo.php?codArquivo=2169

►

Este trabalho apresenta os resultados da investigação do uso de rejeitos particulados de tijolos (RPT) na forma de pó, proveniente de tijolos de cerâmica vermelha,… (more)

▼

Este trabalho apresenta os resultados da investigação do uso de rejeitos particulados de tijolos (RPT) na forma de pó, proveniente de tijolos de cerâmica vermelha, como substituinte parcial do cimento Portland, na produção de argamassas para construção civil. O estudo foi realizado adotando-se o projeto fatorial completo 32 acoplado com técnicas de metodologia de superfícies de resposta. Foram preparadas argamassas usando RPT em níveis de 10%, 20% e 30% (em massa), em substituição ao cimento Portland, com os níveis de relação água/cimento de 0,45, de 0,55 e 0,65. As misturas foram curadas por períodos de 7, 28 e 120 dias. As propriedades das argamassas contendo RPT no estado fresco foram avaliadas: massa específica e índice de consistência. As propriedades avaliadas das argamassas com RPT no estado endurecido foram: resistência à compressão (7, 28 e 120 dias), absorção de água aos 28 dias e teor de álcalis (CaCO3) aos 28 dias. Os resultados obtidos através da metodologia estatística foram confrontados com as análises de difração de raios X (DRX) e microscopia eletrônica de varredura (MEV) de amostras selecionadas. Foram obtidas equações empíricas, gráficos de superfície de resposta e de contorno para as propriedades físico-mecânicas das argamassas com RPT no estado fresco e endurecido, por meio de análise de regressão. A consistência diminuiu linearmente com o aumento da quantidade de RPT incorporado em substituição ao cimento Portland. A massa específica das argamassas contendo RPT foi menor do que na argamassa sem RPT. Foi possível obter argamassas com resistências à compressão aos 28 dias de 21 MPa a 37 MPa para vários níveis de relação água/cimento em até 30 % de substituição de cimento Portland por RPT. Dessa forma, é possível produzir argamassas econômica e ambientalmente viáveis, a partir da substituição parcial de cimento Portland por RPT, nas dosagens estudadas. As análises de DRX e de MEV indicaram a presença do quartzo, da calcita, da etringita, da portlandita, silicatos e porosidade em amostras de argamassas selecionadas, de modo que foi possível relacionar as mesmas com a resistência à compressão das argamassas.

This work describes the results of an investigation on the possible applications of ground waste calcined clay bricks (WCB) for use as an active partial replacement for Portland cement in mortars. The investigation has been carried out using a full factorial design for experimental design. For the study, the physical and mechanical properties along their durability of mortar produced with WCB were investigated and the results presented. Mortar mixtures were prepared using WCB as the partial replacement of Portland cement at the level 10%, 20% and 30 wt.% with water/cement ratios of 0.45, 0.55 and 0.65. The necessary data for establishing a mix proportion design and a quality control method are obtained. Properties of fresh (consistency index and specific gravity) and hardened (7-day, 28-day and 120-day compressive strength, 28-day water absorption and 28-day alkali content) mortars were…

Advisors/Committee Members: Sivaldo Leite Correia.

Subjects/Keywords: Rejeito de tijolos; Argamassas; Projeto fatorial completo; Propriedades de argamassas; Microestruturas; CERAMICA; Mortars; Ground waste calcined clay bricks; Full factorial design.; Physicalmechanical properties; Microstructures

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Scandolara, J. P. (2010). Propriedades de argamassas obtidas pela substituição parcial de cimento Portland por rejeitos particulados de tijolos. (Thesis). Universidade do Estado de Santa Catarina. Retrieved from http://www.tede.udesc.br/tde_busca/arquivo.php?codArquivo=2161 ; http://www.tede.udesc.br/tde_busca/arquivo.php?codArquivo=2162 ; http://www.tede.udesc.br/tde_busca/arquivo.php?codArquivo=2163 ; http://www.tede.udesc.br/tde_busca/arquivo.php?codArquivo=2164 ; http://www.tede.udesc.br/tde_busca/arquivo.php?codArquivo=2167 ; http://www.tede.udesc.br/tde_busca/arquivo.php?codArquivo=2168 ; http://www.tede.udesc.br/tde_busca/arquivo.php?codArquivo=2169

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Scandolara, Juliano Pedro. “Propriedades de argamassas obtidas pela substituição parcial de cimento Portland por rejeitos particulados de tijolos.” 2010. Thesis, Universidade do Estado de Santa Catarina. Accessed April 11, 2021. http://www.tede.udesc.br/tde_busca/arquivo.php?codArquivo=2161 ; http://www.tede.udesc.br/tde_busca/arquivo.php?codArquivo=2162 ; http://www.tede.udesc.br/tde_busca/arquivo.php?codArquivo=2163 ; http://www.tede.udesc.br/tde_busca/arquivo.php?codArquivo=2164 ; http://www.tede.udesc.br/tde_busca/arquivo.php?codArquivo=2167 ; http://www.tede.udesc.br/tde_busca/arquivo.php?codArquivo=2168 ; http://www.tede.udesc.br/tde_busca/arquivo.php?codArquivo=2169.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Scandolara, Juliano Pedro. “Propriedades de argamassas obtidas pela substituição parcial de cimento Portland por rejeitos particulados de tijolos.” 2010. Web. 11 Apr 2021.

Vancouver:

Scandolara JP. Propriedades de argamassas obtidas pela substituição parcial de cimento Portland por rejeitos particulados de tijolos. [Internet] [Thesis]. Universidade do Estado de Santa Catarina; 2010. [cited 2021 Apr 11]. Available from: http://www.tede.udesc.br/tde_busca/arquivo.php?codArquivo=2161 ; http://www.tede.udesc.br/tde_busca/arquivo.php?codArquivo=2162 ; http://www.tede.udesc.br/tde_busca/arquivo.php?codArquivo=2163 ; http://www.tede.udesc.br/tde_busca/arquivo.php?codArquivo=2164 ; http://www.tede.udesc.br/tde_busca/arquivo.php?codArquivo=2167 ; http://www.tede.udesc.br/tde_busca/arquivo.php?codArquivo=2168 ; http://www.tede.udesc.br/tde_busca/arquivo.php?codArquivo=2169.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Scandolara JP. Propriedades de argamassas obtidas pela substituição parcial de cimento Portland por rejeitos particulados de tijolos. [Thesis]. Universidade do Estado de Santa Catarina; 2010. Available from: http://www.tede.udesc.br/tde_busca/arquivo.php?codArquivo=2161 ; http://www.tede.udesc.br/tde_busca/arquivo.php?codArquivo=2162 ; http://www.tede.udesc.br/tde_busca/arquivo.php?codArquivo=2163 ; http://www.tede.udesc.br/tde_busca/arquivo.php?codArquivo=2164 ; http://www.tede.udesc.br/tde_busca/arquivo.php?codArquivo=2167 ; http://www.tede.udesc.br/tde_busca/arquivo.php?codArquivo=2168 ; http://www.tede.udesc.br/tde_busca/arquivo.php?codArquivo=2169

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Universidade do Estado do Rio de Janeiro

8. Paulo César Oliveira Carvalho. Otimização do processo de endurecimento superficial de aços de baixa liga.

Degree: Master, 2013, Universidade do Estado do Rio de Janeiro

URL: http://www.bdtd.uerj.br/tde_busca/arquivo.php?codArquivo=6081 ;

► O objetivo deste trabalho é a aplicação de um Planejamento Fatorial Completo, ferramenta estatística que auxiliará a obter dados empíricos para otimizar um tratamento termoquímico,… (more)

Subjects/Keywords: Planejamento fatorial completo; Tratamento termoquímico; Lei de Fick; Aço Tratamento térmico; Estatística matemática; Full factorial design; Thermochemical treatment; TRATAMENTO TERMICOS, MECANICOS E QUIMICOS

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Carvalho, P. C. O. (2013). Otimização do processo de endurecimento superficial de aços de baixa liga. (Masters Thesis). Universidade do Estado do Rio de Janeiro. Retrieved from http://www.bdtd.uerj.br/tde_busca/arquivo.php?codArquivo=6081 ;

Chicago Manual of Style (16^th Edition):

Carvalho, Paulo César Oliveira. “Otimização do processo de endurecimento superficial de aços de baixa liga.” 2013. Masters Thesis, Universidade do Estado do Rio de Janeiro. Accessed April 11, 2021. http://www.bdtd.uerj.br/tde_busca/arquivo.php?codArquivo=6081 ;.

MLA Handbook (7^th Edition):

Carvalho, Paulo César Oliveira. “Otimização do processo de endurecimento superficial de aços de baixa liga.” 2013. Web. 11 Apr 2021.

Vancouver:

Carvalho PCO. Otimização do processo de endurecimento superficial de aços de baixa liga. [Internet] [Masters thesis]. Universidade do Estado do Rio de Janeiro; 2013. [cited 2021 Apr 11]. Available from: http://www.bdtd.uerj.br/tde_busca/arquivo.php?codArquivo=6081 ;.

Council of Science Editors:

Carvalho PCO. Otimização do processo de endurecimento superficial de aços de baixa liga. [Masters Thesis]. Universidade do Estado do Rio de Janeiro; 2013. Available from: http://www.bdtd.uerj.br/tde_busca/arquivo.php?codArquivo=6081 ;

9. Keskin, Omer Faruk. Improving Response Characteristics of Split Ring Resonators Using Experimental Designs.

Degree: MS, Engineering Management, 2015, Old Dominion University

URL: 9781339386263 ; https://digitalcommons.odu.edu/emse_etds/2

► The purpose of this thesis is to investigate the application of design of experiments approaches in the analysis of split ring resonators, and to… (more)

Subjects/Keywords: Meta-materials; Optimization; Central composite design; Design of experiments; Experimental designs; Full factorial design; Split ring resonator; Engineering; Materials Science and Engineering

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Keskin, O. F. (2015). Improving Response Characteristics of Split Ring Resonators Using Experimental Designs. (Thesis). Old Dominion University. Retrieved from 9781339386263 ; https://digitalcommons.odu.edu/emse_etds/2

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Keskin, Omer Faruk. “Improving Response Characteristics of Split Ring Resonators Using Experimental Designs.” 2015. Thesis, Old Dominion University. Accessed April 11, 2021. 9781339386263 ; https://digitalcommons.odu.edu/emse_etds/2.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Keskin, Omer Faruk. “Improving Response Characteristics of Split Ring Resonators Using Experimental Designs.” 2015. Web. 11 Apr 2021.

Vancouver:

Keskin OF. Improving Response Characteristics of Split Ring Resonators Using Experimental Designs. [Internet] [Thesis]. Old Dominion University; 2015. [cited 2021 Apr 11]. Available from: 9781339386263 ; https://digitalcommons.odu.edu/emse_etds/2.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Keskin OF. Improving Response Characteristics of Split Ring Resonators Using Experimental Designs. [Thesis]. Old Dominion University; 2015. Available from: 9781339386263 ; https://digitalcommons.odu.edu/emse_etds/2

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

10. Jović Žarko. Chemometric approach to the development of HPLC/UV and HPLC/MS methods for determination and stability testing of torasemide and its impurities.

Degree: PhD, Pharmacy, 2013, University of Belgrade

URL: http://dx.doi.org/10.2298/BG20130318JOVIC ; http://eteze.bg.ac.rs/application/showtheses?thesesId=195 ; https://fedorabg.bg.ac.rs/fedora/get/o:5442/bdef:Content/get ; http://vbs.rs/scripts/cobiss?command=SEARCH&base=99999&select=ID=43566607

► Torasemide is a loop diuretic with actions similar to those of furosemide. Torasemide is used for edema associated with heart failure, including pulmonary edema, and… (more)

▼ Torasemide is a loop diuretic with actions similar to those of furosemide. Torasemide is used for edema associated with heart failure, including pulmonary edema, and with renal and hepatic disorders. It is also used in the treatment of hypertension, either alone or with other antihypertensives. It acts in the ascending limb of the loop of Henle by inhibiting tubular reapsorption of sodium and chloride and interacting with the sodium/chloride/potassium co-transport system. In the quality control of pharmaceutical products identification and quantification of the active ingredient and its impurities is very important in order to achieve a high quality of the product, without change in chemical, pharmacological and toxicological properties. According to ICH guidelines, determination of impurities present in pharmaceutical dosage forms above 0.1% is necessary. A new, sensitive and reliable HPLC/UV and HPLC/MS methods for simultaneous determination of torasemide and its impurities were developed. The complete chromatographic behavior and optimal chromatographic conditions were evaluated with the assistance of experimental design. The fractional factorial design was used for selection of variables which significantly influence the chromatographic separation of the investigated substances. Full factorial design was used for optimization of these variables in order to achieve satisfactory resolution between all investigated substances with the shortest possible analysis time. Afterwards, both analytical methods were successfully validated in accordance with ICH guidelines and the applicability of the proposed methods on the torasemide tablet dosage form has been demonstrated. As the degradation mechanism of torasemide has been lacking in the literature, torasemide active pharmaceutical ingredient and torasemide tablets drug product were subjected to forced degradation studies in order to identify the potential degradation products and establish the possible degradation pathways and intrinsic stability of the drug. The study was performed according to ICH guidelines and samples were exposed to hydrolysis (acid, base and neutral), oxidation, photolysis and thermal degradation. To characterize the arisen degradation products, HPLC/UV and HPLC/MSn methods were applied. Using single quadrupole and ion trap mass analyzers, a mass fragmentation pattern of degradation products was established. The major degradation product which was formed corresponds to degradation product R2. Under the extreme oxidative stress conditions two degradation products were formed and are proposed to be torasemide Noxide and degradation product R2-N-oxide. An integral aim of the study was to postulate possible degradation pathway of the drug in different experimental conditions. Forced degradation studies enabled a development of selective and validated stability-indicating HPLC/UV method. A multicriterion evaluation methodology in combination with experimental design was employed for development and optimization of the…

Subjects/Keywords: torasemide; liquid chromatography; mass spectroscopy; method validation; fractional factorial design; full factorial design; central composite design; Derringer’s desirability function; forced degradation; degradation products; torasemid; tečna hromatografija; masena spektroskopija; validacija metode; frakcioni faktorski dizajn; puni faktorski dizajn; centralni kompozicioni dizajn; Deringerova funkcija poželjnih odgovora; forsirana degradacija; degradacioni proizvodi

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Žarko, J. (2013). Chemometric approach to the development of HPLC/UV and HPLC/MS methods for determination and stability testing of torasemide and its impurities. (Doctoral Dissertation). University of Belgrade. Retrieved from http://dx.doi.org/10.2298/BG20130318JOVIC ; http://eteze.bg.ac.rs/application/showtheses?thesesId=195 ; https://fedorabg.bg.ac.rs/fedora/get/o:5442/bdef:Content/get ; http://vbs.rs/scripts/cobiss?command=SEARCH&base=99999&select=ID=43566607

Chicago Manual of Style (16^th Edition):

Žarko, Jović. “Chemometric approach to the development of HPLC/UV and HPLC/MS methods for determination and stability testing of torasemide and its impurities.” 2013. Doctoral Dissertation, University of Belgrade. Accessed April 11, 2021. http://dx.doi.org/10.2298/BG20130318JOVIC ; http://eteze.bg.ac.rs/application/showtheses?thesesId=195 ; https://fedorabg.bg.ac.rs/fedora/get/o:5442/bdef:Content/get ; http://vbs.rs/scripts/cobiss?command=SEARCH&base=99999&select=ID=43566607.

MLA Handbook (7^th Edition):

Žarko, Jović. “Chemometric approach to the development of HPLC/UV and HPLC/MS methods for determination and stability testing of torasemide and its impurities.” 2013. Web. 11 Apr 2021.

Vancouver:

Žarko J. Chemometric approach to the development of HPLC/UV and HPLC/MS methods for determination and stability testing of torasemide and its impurities. [Internet] [Doctoral dissertation]. University of Belgrade; 2013. [cited 2021 Apr 11]. Available from: http://dx.doi.org/10.2298/BG20130318JOVIC ; http://eteze.bg.ac.rs/application/showtheses?thesesId=195 ; https://fedorabg.bg.ac.rs/fedora/get/o:5442/bdef:Content/get ; http://vbs.rs/scripts/cobiss?command=SEARCH&base=99999&select=ID=43566607.

Council of Science Editors:

Žarko J. Chemometric approach to the development of HPLC/UV and HPLC/MS methods for determination and stability testing of torasemide and its impurities. [Doctoral Dissertation]. University of Belgrade; 2013. Available from: http://dx.doi.org/10.2298/BG20130318JOVIC ; http://eteze.bg.ac.rs/application/showtheses?thesesId=195 ; https://fedorabg.bg.ac.rs/fedora/get/o:5442/bdef:Content/get ; http://vbs.rs/scripts/cobiss?command=SEARCH&base=99999&select=ID=43566607

11. Taşer, Raziye. Sulu çözeltiden ve metal endüstrisi atık suyundan kurşun ve krom (VI) giderimi .

Degree: ESOGÜ, Mühendislik Fakültesi, Kimya Mühendisliği, 2013, Eskisehir Osmangazi University

URL: http://hdl.handle.net/11684/808

Subjects/Keywords: Kimyasal Çöktürme; Adsorpsiyon; Metal Giderimi; Kestane Kabuğu; Tam Faktöriyel Deney Tasarımı; Chemical Precipitation; Adsorption; Metal Removal; Chestnut Shell; Full Factorial Design

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Taşer, R. (2013). Sulu çözeltiden ve metal endüstrisi atık suyundan kurşun ve krom (VI) giderimi . (Thesis). Eskisehir Osmangazi University. Retrieved from http://hdl.handle.net/11684/808

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Taşer, Raziye. “Sulu çözeltiden ve metal endüstrisi atık suyundan kurşun ve krom (VI) giderimi .” 2013. Thesis, Eskisehir Osmangazi University. Accessed April 11, 2021. http://hdl.handle.net/11684/808.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Taşer, Raziye. “Sulu çözeltiden ve metal endüstrisi atık suyundan kurşun ve krom (VI) giderimi .” 2013. Web. 11 Apr 2021.

Vancouver:

Taşer R. Sulu çözeltiden ve metal endüstrisi atık suyundan kurşun ve krom (VI) giderimi . [Internet] [Thesis]. Eskisehir Osmangazi University; 2013. [cited 2021 Apr 11]. Available from: http://hdl.handle.net/11684/808.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Taşer R. Sulu çözeltiden ve metal endüstrisi atık suyundan kurşun ve krom (VI) giderimi . [Thesis]. Eskisehir Osmangazi University; 2013. Available from: http://hdl.handle.net/11684/808

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

12. Skogsberg, Zara. Investigation of the Impact on Yeast Fermentation Performance in Production of Pale Lager Beer through Management Control.

Degree: The Institute of Technology, 2013, Linköping UniversityLinköping University

URL: http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-100150

► Through a full factorial design experiment, the effects of time between worts, wort aeration and yeast dosage in production of a pale lager beer… (more)

Subjects/Keywords: Yeast Fermentation; Full Factorial Design; Wort Aeration; Yeast Dosage; Ester Production; Yeast Viability

…5.1.1 Design Variables . . . . . . . . . . . 5.1.2 Full Factorial Design… …5.1.1 Design Variables When setting up a full factorial design with three factors, the… …x29; 12 h 30 mg O2 /L 250 g/hL Table 5.1. The design variables used. 5.1.2 Full Factorial… …well as yeast of other generations. As there was not enough time to set up a full factorial… …lower and upper level at different times, the full factorial design and full factorial design…

10 more images…

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Skogsberg, Z. (2013). Investigation of the Impact on Yeast Fermentation Performance in Production of Pale Lager Beer through Management Control. (Thesis). Linköping UniversityLinköping University. Retrieved from http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-100150

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Skogsberg, Zara. “Investigation of the Impact on Yeast Fermentation Performance in Production of Pale Lager Beer through Management Control.” 2013. Thesis, Linköping UniversityLinköping University. Accessed April 11, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-100150.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Skogsberg, Zara. “Investigation of the Impact on Yeast Fermentation Performance in Production of Pale Lager Beer through Management Control.” 2013. Web. 11 Apr 2021.

Vancouver:

Skogsberg Z. Investigation of the Impact on Yeast Fermentation Performance in Production of Pale Lager Beer through Management Control. [Internet] [Thesis]. Linköping UniversityLinköping University; 2013. [cited 2021 Apr 11]. Available from: http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-100150.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Skogsberg Z. Investigation of the Impact on Yeast Fermentation Performance in Production of Pale Lager Beer through Management Control. [Thesis]. Linköping UniversityLinköping University; 2013. Available from: http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-100150

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

University of Waterloo

13. Shafiee Monfared, Ehsan. Natural Fiber-Plastic Composites for Construction Applications.

Degree: 2016, University of Waterloo

URL: http://hdl.handle.net/10012/10211

► Natural fiber-plastic composites containing natural fibers as dispersed phase (filler) and polypropylene as matrix are an important and emerging type of compounds used in construction,… (more)

▼ Natural fiber-plastic composites containing natural fibers as dispersed phase (filler) and polypropylene as matrix are an important and emerging type of compounds used in construction, automotive, consumer products, etc. To evaluate and understand the properties of NFPCs in construction industry, it is important to check the mechanical properties of laboratory prepared NFPCs with various fibers, polypropylene grades and additives. To achieve this goal, the fibers are needed to be ground and be thoroughly analyzed for fiber sizes distributions and aspect ratios distributions to identify the size and shape of fibers to correlate such information with mechanical properties of the NFPC. In this dissertation, it was found that oat hull fibers were smaller than bagasse fibers on average and had lower aspect ratios compared to bagasse fibers. Using Minitab software, two-level factorial experimental design was employed in three design of experiments (DOEs) to check the effect of fiber type, fiber content, coupling agent content, impact modifier type and impact modifier content on mechanical and impact properties of NFPC. Samples as per DOE runs were conditioned, compounded with twin screw co-rotating extruder, injection molded and tested. The results indicated that bagasse interacts much better compared to oat hull with coupling agent. As well, styrene copolymerized with ethylene/propylene rubber appeared to be more effective in increasing impact properties. Coupling agent appeared to very effective increasing tensile properties although had mild deteriorating effect on impact properties. It was found that compared to unfilled polypropylene, bagasse as a natural filler was very effective on Flexural properties, however, bagasse decreased the tensile properties when compared to unfilled polypropylene. SEM microscopy was used to observe mechanism of impact and appeared to support numerical tests results of Izod Impact Energy responses. Statistical methods generally validated the results and best normal residual plot fit was for Izod Impact results which was almost linear. The worst fit however, belonged to mean failure Energy results. Statistical validity of results was also considered in detail using normal residual plots and were reported in detail for each DOE. Generally, the results were validated with some exceptions. It is important to evaluate and understand the effect of UV weathering on properties of commercially available NFPC products. To achieve this goal, a Design of experiment was designed to run tests for effect of weathering and physical impact location on multi-axial impact properties of an NFPC product. Commercial products were cut to size and impacted by multi-axial impact tester and work versus displacement graphs were generated. Effect of UV weathering and impact location was studied on Multi-Axial impact responses of NFPC commercial roofing product and results indicated UV weathering deteriorated total energy, energy to maximum load and maximum load of roofing product. The location of impact either in…

Subjects/Keywords: WPC; NFPC; Wood Plastic Composite; Natural Fiber Plastic Composite; bagasse; oat hull; polypropylene; SEBS; SEPS; MAPP; Polypropylene grafted maleic anhydride; construction; roofing shakes shingles; dynatup multi-axial impact; UV weathering; twin screw extrusion; SEM; impact modifier; particle size analysis; full factorial design of experiment minitab

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Shafiee Monfared, E. (2016). Natural Fiber-Plastic Composites for Construction Applications. (Thesis). University of Waterloo. Retrieved from http://hdl.handle.net/10012/10211

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Shafiee Monfared, Ehsan. “Natural Fiber-Plastic Composites for Construction Applications.” 2016. Thesis, University of Waterloo. Accessed April 11, 2021. http://hdl.handle.net/10012/10211.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Shafiee Monfared, Ehsan. “Natural Fiber-Plastic Composites for Construction Applications.” 2016. Web. 11 Apr 2021.

Vancouver:

Shafiee Monfared E. Natural Fiber-Plastic Composites for Construction Applications. [Internet] [Thesis]. University of Waterloo; 2016. [cited 2021 Apr 11]. Available from: http://hdl.handle.net/10012/10211.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Shafiee Monfared E. Natural Fiber-Plastic Composites for Construction Applications. [Thesis]. University of Waterloo; 2016. Available from: http://hdl.handle.net/10012/10211

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

14. Calaça, Giselle Nathaly. DESENVOLVIMENTO DE MÉTODOS VOLTAMÉTRICOS UTILIZANDO PLANEJAMENTO FATORIAL PARA DETERMINAÇÕES SIMULTÂNEAS DE ASSOCIAÇÕES FARMACÊUTICAS E COSMÉTICAS.

Degree: 2015, UNIVERSIDADE ESTADUAL DE PONTA GROSSA; Programa Associado de Pós-Graduação em Química – Doutorado; UEPG; BR; Físico Química, Química Analitica, Química Organica, Química Inorgânica

URL: http://tede2.uepg.br/jspui/handle/prefix/4

►

Made available in DSpace on 2017-07-20T12:40:14Z (GMT). No. of bitstreams: 1 Giselle Nathaly Calaca.pdf: 4129912 bytes, checksum: 17ad0dde0faa7762fe24c34e6ffcd471 (MD5) Previous issue date: 2015-03-23

Fundação Araucária… (more)

▼

Made available in DSpace on 2017-07-20T12:40:14Z (GMT). No. of bitstreams: 1 Giselle Nathaly Calaca.pdf: 4129912 bytes, checksum: 17ad0dde0faa7762fe24c34e6ffcd471 (MD5) Previous issue date: 2015-03-23

Fundação Araucária de Apoio ao Desenvolvimento Científico e Tecnológico do Paraná

The development and validation of analytical methods for quantification of two associations, antibiotics: sulfamethoxazole (SMX) and trimethoprim (TMP); and depigmenting agents: kojic acid (AK) and hydroquinone (HQ), using unmodified glassy carbon electrode (ECV) and square wave voltammetry (SWV) are described. For the first association, two well defined irreversible oxidation peaks were obtained at 0.96V (SMX) and 1.12V (TMP) in Britton–Robinson buffer (pH 6.0), characterized by diffusion and adsorptive processes, respectively. SWV parameters were optimized by means of 23 Full Factorial Design, and the best analytical signal, in terms of sensitivity and selectivity is obtained at a=30 mV, f=100 s-1 and ΔES=5mV. Under optimized conditions, SWV measurements showed excellent linear response, from 5.5x10-5 to 3.95x10-4 mol L-1 (R=0.9971) and 1.05x10-5 to 1.04x10-4 mol L-1 (R=0.9974) for SMX and TMP, respectively. The detection and quantification limits were found to be 8.52x10-6 mol L-1 and 2.84x10-5 mol L-1 for SMX; and 9.31x10-7 mol L-1 and 3.10x10-6 mol L-1 for TMP, respectively. The proposed method was successfully applied to the simultaneous determination of these antibiotics in commercial pharmaceutical formulations (tablets, oral suspension and injection), without any sample pretreatment. The obtained results are in good agreement with that obtained by the standard HPLC method at a 95% confidence level. For the second association, the redox peak potentials were completely separated in Mcllvaine buffer solution (pH 8.0), KA exhibits a well-defined irreversible oxidation peak at 0.72V and HQ a quasi-reversible redox peak at 0.08 V and -0.02 V, characterized by adsorptive and diffusional processes, respectively. Under SWV parameters optimized (a= 40 mV, f=40 s-1 and ΔES=1mV) by 23 Full Factorial Design, the calibration curves were obtained in the concentration ranges of 3.5×10-5 to 2.5×10-4 mol L-1 (R= 0.9996) for kojic acid and 1.5×10-5 to 1.6×10-4 mol L-1 (R= 0.9994) for hydroquinone. The detection and quantification limits were found to be 7.84x10-6 mol L-1 and 2.61x10-5 mol L-1 for KA; and 3.71x10-6 mol L-1 and 1.24x10-5 mol L-1 for HQ, respectively. The novel electroanalytical method was validated in terms of specificity, linearity, range, accuracy and precision (repeatability and intermediate precision) and successfully applied to the direct simultaneous determination of these bleaching agents in real samples.

O trabalho descreve o desenvolvimento e a validação de métodos analíticos para quantificação de duas associações, os antibióticos: sulfametoxazol (SMX) e trimetoprima (TMP); e os agentes despigmentantes: ácido kójico (AK) e hidroquinona (HQ), empregando-se eletrodo de carbono vítreo (ECV) não modificado e…

Advisors/Committee Members: Nagata, Noemi, Gil, Eric de Souza, Quinaia, Sueli Pércio, Tarley, Cesar Ricardo Teixeira, Santos, Wallans Torres Pio dos.

Subjects/Keywords: Ácido Kójico; Hidroquinona; Sulfametoxazol; Trimetoprima; carbono vítreo; voltametria de onda quadrada; planejamento fatorial de experimentos; formulações farmacêuticas; Kojic Acid; Hydroquinone; Sulfamethoxazole; Trimethoprim; glassy carbon electrode; square wave voltammetry; full factorial design; pharmaceutical formulations; CNPQ::CIENCIAS EXATAS E DA TERRA::QUIMICA::QUIMICA ANALITICA

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Calaça, G. N. (2015). DESENVOLVIMENTO DE MÉTODOS VOLTAMÉTRICOS UTILIZANDO PLANEJAMENTO FATORIAL PARA DETERMINAÇÕES SIMULTÂNEAS DE ASSOCIAÇÕES FARMACÊUTICAS E COSMÉTICAS. (Doctoral Dissertation). UNIVERSIDADE ESTADUAL DE PONTA GROSSA; Programa Associado de Pós-Graduação em Química – Doutorado; UEPG; BR; Físico Química, Química Analitica, Química Organica, Química Inorgânica. Retrieved from http://tede2.uepg.br/jspui/handle/prefix/4

Chicago Manual of Style (16^th Edition):

Calaça, Giselle Nathaly. “DESENVOLVIMENTO DE MÉTODOS VOLTAMÉTRICOS UTILIZANDO PLANEJAMENTO FATORIAL PARA DETERMINAÇÕES SIMULTÂNEAS DE ASSOCIAÇÕES FARMACÊUTICAS E COSMÉTICAS.” 2015. Doctoral Dissertation, UNIVERSIDADE ESTADUAL DE PONTA GROSSA; Programa Associado de Pós-Graduação em Química – Doutorado; UEPG; BR; Físico Química, Química Analitica, Química Organica, Química Inorgânica. Accessed April 11, 2021. http://tede2.uepg.br/jspui/handle/prefix/4.

MLA Handbook (7^th Edition):

Calaça, Giselle Nathaly. “DESENVOLVIMENTO DE MÉTODOS VOLTAMÉTRICOS UTILIZANDO PLANEJAMENTO FATORIAL PARA DETERMINAÇÕES SIMULTÂNEAS DE ASSOCIAÇÕES FARMACÊUTICAS E COSMÉTICAS.” 2015. Web. 11 Apr 2021.

Vancouver:

Calaça GN. DESENVOLVIMENTO DE MÉTODOS VOLTAMÉTRICOS UTILIZANDO PLANEJAMENTO FATORIAL PARA DETERMINAÇÕES SIMULTÂNEAS DE ASSOCIAÇÕES FARMACÊUTICAS E COSMÉTICAS. [Internet] [Doctoral dissertation]. UNIVERSIDADE ESTADUAL DE PONTA GROSSA; Programa Associado de Pós-Graduação em Química – Doutorado; UEPG; BR; Físico Química, Química Analitica, Química Organica, Química Inorgânica; 2015. [cited 2021 Apr 11]. Available from: http://tede2.uepg.br/jspui/handle/prefix/4.

Council of Science Editors:

Calaça GN. DESENVOLVIMENTO DE MÉTODOS VOLTAMÉTRICOS UTILIZANDO PLANEJAMENTO FATORIAL PARA DETERMINAÇÕES SIMULTÂNEAS DE ASSOCIAÇÕES FARMACÊUTICAS E COSMÉTICAS. [Doctoral Dissertation]. UNIVERSIDADE ESTADUAL DE PONTA GROSSA; Programa Associado de Pós-Graduação em Química – Doutorado; UEPG; BR; Físico Química, Química Analitica, Química Organica, Química Inorgânica; 2015. Available from: http://tede2.uepg.br/jspui/handle/prefix/4

15. Boscolo, Marco. Optimization of inversion ankle taping: A Taguchi method based study.

Degree: PhD, 0351, 2013, University of Illinois – Urbana-Champaign

URL: http://hdl.handle.net/2142/44355

► Optimization of a complex process or system is often a task utilized in industrial engineering where specialized Designs of Experiments (DOEs) are used. Optimization for… (more)

▼ Optimization of a complex process or system is often a task utilized in industrial engineering where specialized Designs of Experiments (DOEs) are used. Optimization for the purpose of finding the ideal condition of a product or process is a novel concept in kinesiology. In kinesiology research comparing 3 or more multi-level independent variables (IVs) is rarely conducted. In optimization DOE studies, each IV is a multi-level independent variable and all combinations of these variables are studied simultaneously with a factorial DOE approach or method. One such method is the Taguchi Method (TM), which is a robust industrial engineering optimization DOE method developed by Dr. Genichi Taguchi in post WWII Japan. The TM was created for the purpose of developing a product or process in a cost effective and efficient manner. To conserve resources the TM relies on fractional factorial orthogonal arrays, which require half or less of all possible linear combinations (LC). The TM works best when the materials under study behave uniformly. When the material behaves uniformly only a few replications of a LC are needed. In optimization studies with humans, humans are the material, and often humans behave non-uniformly which requires many repeat observations of LCs to achieve stable results. The purpose of this study was to validate the use of the TM in a kinesiology and athletic training application using humans along with determining what sample size produces consistent results in a TM study. For this study, the reduction in ankle inversion motion was studied by manipulating ankle taping variables relating to how thick the tape was applied, how high up the lower leg tape was applied, and how thick the prewrap was applied. Each independent variable (IV) was studied at two levels using the same ankle taping pattern. A TM orthogonal linear array four (L4) and a full factorial array were compared to see how close the two arrays optimal results were in value. For score stability progressively smaller sample sizes were analyzed. Video and inclinometery based motion analyses were used to measure the amount of ankle inversion motion, and the amount of plantar flexion. In addition, the weight of each participant’s ankle taping for each LC was measured for cost comparison. No TM based environmental variables where used in this study. Repeated measures statistical analysis was used which involved each participant being tested in each of the taping LCs, a no tape condition, and a durable ankle brace condition. The participants had no history of ankle injury in the past 12 months. The results of this study showed the TM identifying the same optimal LC parameters as the full factorial approach. The results also showed that the TM’s estimated optimal condition value was consistent with the optimal value found with the full factorial approach. To achieve statically significant results a sample size of n = 34 was needed in this study, but if the main emphasis of the researcher was in identifying meaningful difference between LC for… Advisors/Committee Members: Zhu, Weimo (advisor), Zhu, Weimo (Committee Chair), Iwamoto, Gary (committee member), Sosnoff, Jacob J. (committee member), Broglio, Steven P. (committee member).

Subjects/Keywords: Taguchi Method; Design of Experiment; Human Performance Optimization; Cost Saving; Fractional Factorial; Full Factorial; Quality; Optimize; Dose Response; Robustness; Ankle Taping

…144 Full Factorial Analysis: Degrees per Second… …146 Full Factorial Analysis: Plantar Flexion… …156 Full Factorial Analysis: Ankle Tape Weight… …Two DOEs used for optimization purposes are the full factorial and fractional factorial DOEs… …Full factorial designs are very taxing on research resources, because of its large…

10 more images…

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Boscolo, M. (2013). Optimization of inversion ankle taping: A Taguchi method based study. (Doctoral Dissertation). University of Illinois – Urbana-Champaign. Retrieved from http://hdl.handle.net/2142/44355

Chicago Manual of Style (16^th Edition):

Boscolo, Marco. “Optimization of inversion ankle taping: A Taguchi method based study.” 2013. Doctoral Dissertation, University of Illinois – Urbana-Champaign. Accessed April 11, 2021. http://hdl.handle.net/2142/44355.

MLA Handbook (7^th Edition):

Boscolo, Marco. “Optimization of inversion ankle taping: A Taguchi method based study.” 2013. Web. 11 Apr 2021.

Vancouver:

Boscolo M. Optimization of inversion ankle taping: A Taguchi method based study. [Internet] [Doctoral dissertation]. University of Illinois – Urbana-Champaign; 2013. [cited 2021 Apr 11]. Available from: http://hdl.handle.net/2142/44355.

Council of Science Editors:

Boscolo M. Optimization of inversion ankle taping: A Taguchi method based study. [Doctoral Dissertation]. University of Illinois – Urbana-Champaign; 2013. Available from: http://hdl.handle.net/2142/44355

16. COSTA, Eduardo Armando da. Avaliação da resistência a corrosão da liga Ni-W obtida por eletrodeposição.

Degree: 2008, Universidade Federal de Campina Grande; PÓS-GRADUAÇÃO EM ENGENHARIA QUÍMICA; UFCG; Brasil; Centro de Ciências e Tecnologia – CCT

URL: http://dspace.sti.ufcg.edu.br:8080/jspui/handle/riufcg/4905

►

Submitted by Lucienne Costa ([email protected]) on 2019-07-16T19:35:53Z No. of bitstreams: 1 EDUARDO ARMANDO DA COSTA – DISSERTAÇÃO (PPGEQ) 2008.pdf: 3603181 bytes, checksum: 1e41dc2f25b15f52ffbd109ed3098658 (MD5)

Made… (more)

Subjects/Keywords: Engenharia Química; Eletrodeposição - Liga Ni-W; Planejamento Fatorial Completo; Corrosão; Eletroquímica; Ligas Metálicas; Electrodeposition - Ni-W Alloy; Full Factorial Planning; Corrosion; Electrochemistry; Metal Alloys

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

COSTA, E. A. d. (2008). Avaliação da resistência a corrosão da liga Ni-W obtida por eletrodeposição. (Masters Thesis). Universidade Federal de Campina Grande; PÓS-GRADUAÇÃO EM ENGENHARIA QUÍMICA; UFCG; Brasil; Centro de Ciências e Tecnologia – CCT. Retrieved from http://dspace.sti.ufcg.edu.br:8080/jspui/handle/riufcg/4905

Chicago Manual of Style (16^th Edition):

COSTA, Eduardo Armando da. “Avaliação da resistência a corrosão da liga Ni-W obtida por eletrodeposição.” 2008. Masters Thesis, Universidade Federal de Campina Grande; PÓS-GRADUAÇÃO EM ENGENHARIA QUÍMICA; UFCG; Brasil; Centro de Ciências e Tecnologia – CCT. Accessed April 11, 2021. http://dspace.sti.ufcg.edu.br:8080/jspui/handle/riufcg/4905.

MLA Handbook (7^th Edition):

COSTA, Eduardo Armando da. “Avaliação da resistência a corrosão da liga Ni-W obtida por eletrodeposição.” 2008. Web. 11 Apr 2021.

Vancouver:

COSTA EAd. Avaliação da resistência a corrosão da liga Ni-W obtida por eletrodeposição. [Internet] [Masters thesis]. Universidade Federal de Campina Grande; PÓS-GRADUAÇÃO EM ENGENHARIA QUÍMICA; UFCG; Brasil; Centro de Ciências e Tecnologia – CCT; 2008. [cited 2021 Apr 11]. Available from: http://dspace.sti.ufcg.edu.br:8080/jspui/handle/riufcg/4905.

Council of Science Editors:

COSTA EAd. Avaliação da resistência a corrosão da liga Ni-W obtida por eletrodeposição. [Masters Thesis]. Universidade Federal de Campina Grande; PÓS-GRADUAÇÃO EM ENGENHARIA QUÍMICA; UFCG; Brasil; Centro de Ciências e Tecnologia – CCT; 2008. Available from: http://dspace.sti.ufcg.edu.br:8080/jspui/handle/riufcg/4905

17. Simone Patricia Aranha da Paz. Desenvolvimento e otimização de métodos de controle de qualidade e de processo de beneficiamento para bauxitas gibbsíticas tipo-Paragominas.

Degree: 2016, University of São Paulo

URL: http://www.teses.usp.br/teses/disponiveis/3/3134/tde-22092016-100712/

► Desde a prospecção do minério bauxita, passando pelo seu beneficiamento até a sua entrada no processo Bayer, tem-se como principais índices de qualidade e de… (more)

▼ Desde a prospecção do minério bauxita, passando pelo seu beneficiamento até a sua entrada no processo Bayer, tem-se como principais índices de qualidade e de processo os parâmetros químicos: alumina aproveitável (Al2O3Ap) e sílica reativa (SiO2Re), determinados segundo um procedimento que simula a digestão Bayer em escala de laboratório. Uma grande inovação para a indústria da bauxita seria fazer o controle por parâmetros mineralógicos, % gibbsita e % caulinita, via difratometria de raios X, intenção buscada nesse trabalho pela proposta de um método combinado Rietveld-Le Bail-Padrão Interno, cujos resultados são bem promissores para bauxitas gibbsíticas tipo-Paragominas, matriz para qual foi desenvolvido. Tal combinação não só melhorou a qualidade da quantificação de gibbsita e caulinita, como diminuiu o peso de cálculo tornando o procedimento mais prático e rápido. A alta correlação (r2=0,99) entre os resultados mineralógicos pelo método combinado e os resultados químicos pelo método tradicional, os deixam em igual escolha, pois foram iguais estatisticamente. No entanto, ressalta-se que o método tradicional subestima o valor de caulinita pela conversão da SiO2Re, enquanto o método combinado se aproxima mais do valor verdadeiro. Obter um resultado pelo método combinado mostrou ser mais prático e rápido que pelo método tradicional. Enquanto o tempo total estimado pelo combinado é < 3 h, pelo tradicional é de no mínimo 6 h. Como proposta de validação do método combinado, um segundo foi desenvolvido para quantificação de Al-goethita por DSC, o qual mostrou boa precisão. E muito embora o uso da técnica no controle industrial seja pouco provável por questões de praticidade e tempo de análise, usá-la na validação de antigos e novos métodos de quantificação mineralógica de bauxitas pode ser muito útil. A ordem crescente de substituição de Fe por Al pretendida pelas sínteses planejadas (7 variedades) foi confirmada pelos resultados de DRX, FRX, DSC e MEV, e assim um pequeno banco de dados de entalpias padrão de desidroxilação de Al-goethitas foi estabelecido. A produção de padrões complexos, misturas de variedades goethíticas, é tão importante quanto produzir uma só goethita, pois tais misturas são termodinamicamente comuns na natureza e, portanto, comuns em bauxitas. Após uma identificação clara da limitação do método tradicional para estimar caulinita pela conversão de SiO2Re em bauxitas tipo-Paragominas, um estudo de otimização do método Alcan foi realizado com base em um planejamento fatorial completo 23. As variáveis escolhidas foram temperatura, concentração cáustica e tempo para duas situações: bauxita com baixa SiO2Re e bauxita com alta SiO2Re. A temperatura foi a variável mais importante, apresentando um efeito positivo sobre a quantidade de SiO2Re, uma vez que o aumento na temperatura aumentou a taxa de conversão completa de caulinita em sodalita. Modelos empíricos de 1ª ordem foram apropriadamente obtidos para predição da quantidade de SiO2Re como função da temperatura, concentração cáustica e tempo, os quais… Advisors/Committee Members: Henrique Kahn, Fabio Ramos Dias de Andrade, Antonio Carlos Vieira Coelho, Eliomar Evaristo Ferreira, Reiner Neumann.

Subjects/Keywords: Bauxita; Caulinita; DOE fatorial completo; DRX; DSC; Método Alcan; Método de Le Bail; Método de Rietveld; Método do padrão interno; Mineralogia; Modelagem e otimização por análise de regressão; Sílica reativa; Alcan method; DOE full factorial. Modeling and optimization by regression analysis; DSC; Internal Standard method; Kaolinite; Le Bail method; Reactive silica; Rietveld method; XRD

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Paz, S. P. A. d. (2016). Desenvolvimento e otimização de métodos de controle de qualidade e de processo de beneficiamento para bauxitas gibbsíticas tipo-Paragominas. (Doctoral Dissertation). University of São Paulo. Retrieved from http://www.teses.usp.br/teses/disponiveis/3/3134/tde-22092016-100712/

Chicago Manual of Style (16^th Edition):

Paz, Simone Patricia Aranha da. “Desenvolvimento e otimização de métodos de controle de qualidade e de processo de beneficiamento para bauxitas gibbsíticas tipo-Paragominas.” 2016. Doctoral Dissertation, University of São Paulo. Accessed April 11, 2021. http://www.teses.usp.br/teses/disponiveis/3/3134/tde-22092016-100712/.

MLA Handbook (7^th Edition):

Paz, Simone Patricia Aranha da. “Desenvolvimento e otimização de métodos de controle de qualidade e de processo de beneficiamento para bauxitas gibbsíticas tipo-Paragominas.” 2016. Web. 11 Apr 2021.

Vancouver:

Paz SPAd. Desenvolvimento e otimização de métodos de controle de qualidade e de processo de beneficiamento para bauxitas gibbsíticas tipo-Paragominas. [Internet] [Doctoral dissertation]. University of São Paulo; 2016. [cited 2021 Apr 11]. Available from: http://www.teses.usp.br/teses/disponiveis/3/3134/tde-22092016-100712/.

Council of Science Editors:

Paz SPAd. Desenvolvimento e otimização de métodos de controle de qualidade e de processo de beneficiamento para bauxitas gibbsíticas tipo-Paragominas. [Doctoral Dissertation]. University of São Paulo; 2016. Available from: http://www.teses.usp.br/teses/disponiveis/3/3134/tde-22092016-100712/

18. Jansson, Felisa. The Effect of Microcrystalline Cellulose as cushioning excipient during controlled release.

Degree: Chemistry, 2017, Linköping University

URL: http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-134431

► In the pharmaceutical industry, it is always important to have reproducible processes and raw materials of high quality to ensure good quality products. AstraZeneca,… (more)

Subjects/Keywords: AstraZeneca; Microcrystalline cellulose; MUPS; Moisture content; Particle size; Drug release; Controlled release; Release profile; Full factorial design; Design of Experiment; Chemical Sciences; Kemi

…compare MCC from two different suppliers. The first trial was performed using a full factorial… …combinations were investigated which was fulfilled by using a full factorial design. Figure 5: Shows… …experiment was designed as a standard first-order design, which included a 22 full factorial design… …setup is seen in Figure 6. By designing the experiment as a full factorial design all… …was to investigate both low dosage tablets and full dosage tablets, but due to time pressure…

10 more images…

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Jansson, F. (2017). The Effect of Microcrystalline Cellulose as cushioning excipient during controlled release. (Thesis). Linköping University. Retrieved from http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-134431

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Jansson, Felisa. “The Effect of Microcrystalline Cellulose as cushioning excipient during controlled release.” 2017. Thesis, Linköping University. Accessed April 11, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-134431.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Jansson, Felisa. “The Effect of Microcrystalline Cellulose as cushioning excipient during controlled release.” 2017. Web. 11 Apr 2021.

Vancouver:

Jansson F. The Effect of Microcrystalline Cellulose as cushioning excipient during controlled release. [Internet] [Thesis]. Linköping University; 2017. [cited 2021 Apr 11]. Available from: http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-134431.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Jansson F. The Effect of Microcrystalline Cellulose as cushioning excipient during controlled release. [Thesis]. Linköping University; 2017. Available from: http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-134431

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

University of Guelph

19. Stoewen, Debbie Lynn. Clients' Service Expectations and Practitioners' Treatment Recommendations in Veterinary Oncology.

Degree: PhD, Population Medicine, 2012, University of Guelph

URL: https://atrium.lib.uoguelph.ca/xmlui/handle/10214/3671

► Service provision in veterinary oncology in Ontario was examined using a mixed methods approach. First, an interview-based qualitative study explored the service expectations of oncology… (more)

▼ Service provision in veterinary oncology in Ontario was examined using a mixed methods approach. First, an interview-based qualitative study explored the service expectations of oncology clients at a tertiary referral centre. Next, a survey-based quantitative study established an understanding of oncology service in primary care practice and investigated the treatment recommendations of practitioners for dogs diagnosed with cancer. The first study, which involved 30 individual and dyadic interviews, identified “uncertainty” (attributable to the unpredictable nature of cancer and its treatment) as an overarching psychological feature of clients’ experience. Consequently, “the communication of information” (both content and process) was the foremost service expectation. For clients, it enabled confidence in the service, the ability to make informed patient care decisions, and preparedness for the potential outcomes of those decisions; it also contributed to creating a humanistic environment, which enhanced client resiliency. Findings suggest that services can support client efforts to manage uncertainty through strategic design and delivery of service, and incorporate intentional communication strategies to support clients’ psychological fortitude in managing the cancer journey. The second study, a vignette-based survey of primary care practitioners across Ontario (N=1071) which investigated veterinarian decision-making in relation to oncology care, determined that 56% of practitioners recommended referral as their first choice of intervention, while 28% recommended palliative care, 13% in-clinic treatment, and 3% euthanasia. Recommendations were associated with patient, client and veterinarian factors. Specifically, referral and treatment were recommended for younger dogs, healthier dogs, and dogs with lymphoma versus osteosarcoma; for strongly bonded clients, and financially secure clients; and by veterinarians who graduated from a North American college, had experience with treating cancer, felt confident in the referral centre, and believed treatment was worthwhile, with variation in relation to practitioner gender and the type of medicine practiced. The human-animal bond appeared to be the primary factor associated with practitioners’ advocacy for quality of medical care for patients. Through a blend of qualitative and quantitative methodologies, this thesis contributes to the evidence upon which best practices may be built so as to enhance the quality of patient and client care in veterinary oncology. Advisors/Committee Members: Coe, Jason (advisor), Dewey, Cate (advisor).

Subjects/Keywords: client expectations; treatment recommendations; veterinary oncology; practitioner; service expectations; qualitative research; quantitative research; thematic analysis; vignette-based; vignette-based inquiry; full factorial experiment; vignette-based research; specialty oncology service; primary care practice; veterinary client; logistic regression analysis; uncertainty; client uncertainty; interview; cancer; cancer care; canine cancer; lymphoma; osteosarcoma; veterinary communication; communication; communication skills; information; content and process; veterinary cancer care; Ontario; survey; questionnaire; referral; euthanasia; in-clinic treatment; palliative care; quality of care; quality of medical care; illness uncertainty; service provision; oncology; epidemiology; tertiary referral centre; social epidemilogy; veterinary epidemiology; client well-being; human-animal bond; practitioner attitude; best practice; information preferences; preparatory information; cancer journey; communication process; continuity of care; clinical decision making; decision making; practice variation; adaptation

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Stoewen, D. L. (2012). Clients' Service Expectations and Practitioners' Treatment Recommendations in Veterinary Oncology. (Doctoral Dissertation). University of Guelph. Retrieved from https://atrium.lib.uoguelph.ca/xmlui/handle/10214/3671

Chicago Manual of Style (16^th Edition):

Stoewen, Debbie Lynn. “Clients' Service Expectations and Practitioners' Treatment Recommendations in Veterinary Oncology.” 2012. Doctoral Dissertation, University of Guelph. Accessed April 11, 2021. https://atrium.lib.uoguelph.ca/xmlui/handle/10214/3671.

MLA Handbook (7^th Edition):

Stoewen, Debbie Lynn. “Clients' Service Expectations and Practitioners' Treatment Recommendations in Veterinary Oncology.” 2012. Web. 11 Apr 2021.

Vancouver:

Stoewen DL. Clients' Service Expectations and Practitioners' Treatment Recommendations in Veterinary Oncology. [Internet] [Doctoral dissertation]. University of Guelph; 2012. [cited 2021 Apr 11]. Available from: https://atrium.lib.uoguelph.ca/xmlui/handle/10214/3671.

Council of Science Editors:

Stoewen DL. Clients' Service Expectations and Practitioners' Treatment Recommendations in Veterinary Oncology. [Doctoral Dissertation]. University of Guelph; 2012. Available from: https://atrium.lib.uoguelph.ca/xmlui/handle/10214/3671

Open Access Theses and Dissertations