Advanced search options

Advanced Search Options 🞨

Browse by author name (“Author name starts with…”).

Find ETDs with:

in
/  
in
/  
in
/  
in

Written in Published in Earliest date Latest date

Sorted by

Results per page:

Sorted by: relevance · author · university · dateNew search

You searched for subject:(Forging). Showing records 1 – 30 of 214 total matches.

[1] [2] [3] [4] [5] [6] [7] [8]

Search Limiters

Last 2 Years | English Only

Degrees

Levels

Languages

Country

▼ Search Limiters


University of Waikato

1. Velluvakkandi, Navaneeth. Simulation of the powder forging process for titanium components using a porous metal plasticity model .

Degree: 2014, University of Waikato

 Powder forging is a technique that has been used to produce fully dense near-net parts from metal powders. Due to a “low cost titanium” product… (more)

Subjects/Keywords: powder forging; forging simulation

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Velluvakkandi, N. (2014). Simulation of the powder forging process for titanium components using a porous metal plasticity model . (Doctoral Dissertation). University of Waikato. Retrieved from http://hdl.handle.net/10289/10213

Chicago Manual of Style (16th Edition):

Velluvakkandi, Navaneeth. “Simulation of the powder forging process for titanium components using a porous metal plasticity model .” 2014. Doctoral Dissertation, University of Waikato. Accessed December 13, 2019. http://hdl.handle.net/10289/10213.

MLA Handbook (7th Edition):

Velluvakkandi, Navaneeth. “Simulation of the powder forging process for titanium components using a porous metal plasticity model .” 2014. Web. 13 Dec 2019.

Vancouver:

Velluvakkandi N. Simulation of the powder forging process for titanium components using a porous metal plasticity model . [Internet] [Doctoral dissertation]. University of Waikato; 2014. [cited 2019 Dec 13]. Available from: http://hdl.handle.net/10289/10213.

Council of Science Editors:

Velluvakkandi N. Simulation of the powder forging process for titanium components using a porous metal plasticity model . [Doctoral Dissertation]. University of Waikato; 2014. Available from: http://hdl.handle.net/10289/10213


Michigan State University

2. Eding, Warren Jay. An investigation of forging-hammer anvil failures.

Degree: MS, 1953, Michigan State University

Subjects/Keywords: Forging

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Eding, W. J. (1953). An investigation of forging-hammer anvil failures. (Masters Thesis). Michigan State University. Retrieved from http://etd.lib.msu.edu/islandora/object/etd:10524

Chicago Manual of Style (16th Edition):

Eding, Warren Jay. “An investigation of forging-hammer anvil failures.” 1953. Masters Thesis, Michigan State University. Accessed December 13, 2019. http://etd.lib.msu.edu/islandora/object/etd:10524.

MLA Handbook (7th Edition):

Eding, Warren Jay. “An investigation of forging-hammer anvil failures.” 1953. Web. 13 Dec 2019.

Vancouver:

Eding WJ. An investigation of forging-hammer anvil failures. [Internet] [Masters thesis]. Michigan State University; 1953. [cited 2019 Dec 13]. Available from: http://etd.lib.msu.edu/islandora/object/etd:10524.

Council of Science Editors:

Eding WJ. An investigation of forging-hammer anvil failures. [Masters Thesis]. Michigan State University; 1953. Available from: http://etd.lib.msu.edu/islandora/object/etd:10524

3. Espinoza, Edgar. Optimizing a Hammer Forging Progression for a Large Hand Tool.

Degree: 2015, Marquette University

 In the forging industry of today the need for United States based companies to reduce cost and maintain or improve the quality of a product… (more)

Subjects/Keywords: DEFORM; Forging Process Optimization; Hammer Forging; Process Modeling Simulations; Roll Forging; Manufacturing; Mechanical Engineering

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Espinoza, E. (2015). Optimizing a Hammer Forging Progression for a Large Hand Tool. (Thesis). Marquette University. Retrieved from https://epublications.marquette.edu/theses_open/337

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16th Edition):

Espinoza, Edgar. “Optimizing a Hammer Forging Progression for a Large Hand Tool.” 2015. Thesis, Marquette University. Accessed December 13, 2019. https://epublications.marquette.edu/theses_open/337.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7th Edition):

Espinoza, Edgar. “Optimizing a Hammer Forging Progression for a Large Hand Tool.” 2015. Web. 13 Dec 2019.

Vancouver:

Espinoza E. Optimizing a Hammer Forging Progression for a Large Hand Tool. [Internet] [Thesis]. Marquette University; 2015. [cited 2019 Dec 13]. Available from: https://epublications.marquette.edu/theses_open/337.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Espinoza E. Optimizing a Hammer Forging Progression for a Large Hand Tool. [Thesis]. Marquette University; 2015. Available from: https://epublications.marquette.edu/theses_open/337

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation


Brno University of Technology

4. Kameník, Tomáš. Zápustkové kování pastorku .

Degree: 2010, Brno University of Technology

 KAMENÍK Tomáš: Zápustkové kování pastorku Projekt vypracovaný v rámci bakalářského studia oboru B 2307 překládá návrh technologie výkovku – pastorku- zhotoveným zápustkovým kováním z materiálu… (more)

Subjects/Keywords: Zápustkové kování; výkovek; výronek; pastorek; zápustka; Drop forging; forging; fin; pinion; forging die

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Kameník, T. (2010). Zápustkové kování pastorku . (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/16336

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16th Edition):

Kameník, Tomáš. “Zápustkové kování pastorku .” 2010. Thesis, Brno University of Technology. Accessed December 13, 2019. http://hdl.handle.net/11012/16336.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7th Edition):

Kameník, Tomáš. “Zápustkové kování pastorku .” 2010. Web. 13 Dec 2019.

Vancouver:

Kameník T. Zápustkové kování pastorku . [Internet] [Thesis]. Brno University of Technology; 2010. [cited 2019 Dec 13]. Available from: http://hdl.handle.net/11012/16336.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Kameník T. Zápustkové kování pastorku . [Thesis]. Brno University of Technology; 2010. Available from: http://hdl.handle.net/11012/16336

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation


Brno University of Technology

5. Vondráček, Petr. Stroje používané při zápustkovém kování .

Degree: 2014, Brno University of Technology

 Bakalářská práce obsahuje rozdělení a přehled strojů používaných v procesu zápustkového kování a jejich moderních inovací. U jednotlivých mechanismů je popsán princip, konstrukční uspořádání a… (more)

Subjects/Keywords: kovací lis; buchar; vodorovný kovací stroj; forging press; forging hammer; horizontal forging machine

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Vondráček, P. (2014). Stroje používané při zápustkovém kování . (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/31840

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16th Edition):

Vondráček, Petr. “Stroje používané při zápustkovém kování .” 2014. Thesis, Brno University of Technology. Accessed December 13, 2019. http://hdl.handle.net/11012/31840.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7th Edition):

Vondráček, Petr. “Stroje používané při zápustkovém kování .” 2014. Web. 13 Dec 2019.

Vancouver:

Vondráček P. Stroje používané při zápustkovém kování . [Internet] [Thesis]. Brno University of Technology; 2014. [cited 2019 Dec 13]. Available from: http://hdl.handle.net/11012/31840.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Vondráček P. Stroje používané při zápustkovém kování . [Thesis]. Brno University of Technology; 2014. Available from: http://hdl.handle.net/11012/31840

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation


Brno University of Technology

6. Ležovič, Peter. Bezvýronkové kování výkovku talíře .

Degree: 2014, Brno University of Technology

 Projekt vypracovaný v rámci inžinierskeho štúdia predkladá návrh zmeny v technológii výroby výkovku taniera. Na základe literárnej štúdie problematiky tvárnenia, konkrétne zápustkového kovania, boli za… (more)

Subjects/Keywords: bezvýronkové kovanie; výkovok; objemové tvárnenie; kovací lis; flashless forging; forging; metalforming; forging press

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Ležovič, P. (2014). Bezvýronkové kování výkovku talíře . (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/32724

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16th Edition):

Ležovič, Peter. “Bezvýronkové kování výkovku talíře .” 2014. Thesis, Brno University of Technology. Accessed December 13, 2019. http://hdl.handle.net/11012/32724.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7th Edition):

Ležovič, Peter. “Bezvýronkové kování výkovku talíře .” 2014. Web. 13 Dec 2019.

Vancouver:

Ležovič P. Bezvýronkové kování výkovku talíře . [Internet] [Thesis]. Brno University of Technology; 2014. [cited 2019 Dec 13]. Available from: http://hdl.handle.net/11012/32724.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Ležovič P. Bezvýronkové kování výkovku talíře . [Thesis]. Brno University of Technology; 2014. Available from: http://hdl.handle.net/11012/32724

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation


Brno University of Technology

7. Břečka, Marek. Problematika zápustkového kování .

Degree: 2017, Brno University of Technology

 Práce se zabývá problematikou zápustkového kování, což je metoda výroby, která se využívá hlavně ve velkosériové výrobě. Při návrhu výkovku se vychází z výkresové dokumentace.… (more)

Subjects/Keywords: kování; zápustkové kování; tváření; kovací stroj; forging; drop forging; forming; forging machine

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Břečka, M. (2017). Problematika zápustkového kování . (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/65943

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16th Edition):

Břečka, Marek. “Problematika zápustkového kování .” 2017. Thesis, Brno University of Technology. Accessed December 13, 2019. http://hdl.handle.net/11012/65943.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7th Edition):

Břečka, Marek. “Problematika zápustkového kování .” 2017. Web. 13 Dec 2019.

Vancouver:

Břečka M. Problematika zápustkového kování . [Internet] [Thesis]. Brno University of Technology; 2017. [cited 2019 Dec 13]. Available from: http://hdl.handle.net/11012/65943.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Břečka M. Problematika zápustkového kování . [Thesis]. Brno University of Technology; 2017. Available from: http://hdl.handle.net/11012/65943

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation


University of Waikato

8. Zhang, Zhibo. Simulation of Titanium and Titanium Alloy Powder Compact Forging .

Degree: 2011, University of Waikato

 Simulation can be divided into two types: physical simulation and interactive numerical simulation. Physical simulation depends on testing smaller or cheaper samples rather than real… (more)

Subjects/Keywords: Titanium; simulation; forging; abaqus

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Zhang, Z. (2011). Simulation of Titanium and Titanium Alloy Powder Compact Forging . (Masters Thesis). University of Waikato. Retrieved from http://hdl.handle.net/10289/5777

Chicago Manual of Style (16th Edition):

Zhang, Zhibo. “Simulation of Titanium and Titanium Alloy Powder Compact Forging .” 2011. Masters Thesis, University of Waikato. Accessed December 13, 2019. http://hdl.handle.net/10289/5777.

MLA Handbook (7th Edition):

Zhang, Zhibo. “Simulation of Titanium and Titanium Alloy Powder Compact Forging .” 2011. Web. 13 Dec 2019.

Vancouver:

Zhang Z. Simulation of Titanium and Titanium Alloy Powder Compact Forging . [Internet] [Masters thesis]. University of Waikato; 2011. [cited 2019 Dec 13]. Available from: http://hdl.handle.net/10289/5777.

Council of Science Editors:

Zhang Z. Simulation of Titanium and Titanium Alloy Powder Compact Forging . [Masters Thesis]. University of Waikato; 2011. Available from: http://hdl.handle.net/10289/5777


University of Waterloo

9. Wong, Tsz Wun (Rick). High Temperature Forging of AZ31B Magnesium Alloy.

Degree: 2016, University of Waterloo

 Isothermal uniaxial compression tests were conducted on AZ31B magnesium alloy with the intention of applying the findings to an industrial forging operation. Given the poor… (more)

Subjects/Keywords: Forging; Magnesium; AZ31B; High Temperature

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Wong, T. W. (. (2016). High Temperature Forging of AZ31B Magnesium Alloy. (Thesis). University of Waterloo. Retrieved from http://hdl.handle.net/10012/10694

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16th Edition):

Wong, Tsz Wun (Rick). “High Temperature Forging of AZ31B Magnesium Alloy.” 2016. Thesis, University of Waterloo. Accessed December 13, 2019. http://hdl.handle.net/10012/10694.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7th Edition):

Wong, Tsz Wun (Rick). “High Temperature Forging of AZ31B Magnesium Alloy.” 2016. Web. 13 Dec 2019.

Vancouver:

Wong TW(. High Temperature Forging of AZ31B Magnesium Alloy. [Internet] [Thesis]. University of Waterloo; 2016. [cited 2019 Dec 13]. Available from: http://hdl.handle.net/10012/10694.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Wong TW(. High Temperature Forging of AZ31B Magnesium Alloy. [Thesis]. University of Waterloo; 2016. Available from: http://hdl.handle.net/10012/10694

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation


University of Waterloo

10. Toscano, Dwayne. Characterization of the Quasi-Static and Fatigue Behavior of Forged AZ31B Magnesium Alloy.

Degree: 2018, University of Waterloo

 Light-weighting is being aggressively targeted by automotive manufacturers as a method to reduce emissions. Magnesium (Mg) alloys due to their low density and high specific… (more)

Subjects/Keywords: Magnesium; Fatigue; Forging; Texture; Microstructure

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Toscano, D. (2018). Characterization of the Quasi-Static and Fatigue Behavior of Forged AZ31B Magnesium Alloy. (Thesis). University of Waterloo. Retrieved from http://hdl.handle.net/10012/13095

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16th Edition):

Toscano, Dwayne. “Characterization of the Quasi-Static and Fatigue Behavior of Forged AZ31B Magnesium Alloy.” 2018. Thesis, University of Waterloo. Accessed December 13, 2019. http://hdl.handle.net/10012/13095.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7th Edition):

Toscano, Dwayne. “Characterization of the Quasi-Static and Fatigue Behavior of Forged AZ31B Magnesium Alloy.” 2018. Web. 13 Dec 2019.

Vancouver:

Toscano D. Characterization of the Quasi-Static and Fatigue Behavior of Forged AZ31B Magnesium Alloy. [Internet] [Thesis]. University of Waterloo; 2018. [cited 2019 Dec 13]. Available from: http://hdl.handle.net/10012/13095.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Toscano D. Characterization of the Quasi-Static and Fatigue Behavior of Forged AZ31B Magnesium Alloy. [Thesis]. University of Waterloo; 2018. Available from: http://hdl.handle.net/10012/13095

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation


Brno University of Technology

11. Cvrček, Jan. Zápustkové kování pastorku .

Degree: 2013, Brno University of Technology

 Závěrečný projekt vypracovaný v rámci bakalářského studia v oboru Strojírenská technologie posuzuje návrh výroby pastorku metodou zápustkového kování. Pastorek je vyráběn z legované konstrukční oceli… (more)

Subjects/Keywords: Zápustkové kování; svislý kovací lis; výkovek; pastorek; zápustka; Drop forging; vertical forging press; forging; pinion; forging die

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Cvrček, J. (2013). Zápustkové kování pastorku . (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/20286

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16th Edition):

Cvrček, Jan. “Zápustkové kování pastorku .” 2013. Thesis, Brno University of Technology. Accessed December 13, 2019. http://hdl.handle.net/11012/20286.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7th Edition):

Cvrček, Jan. “Zápustkové kování pastorku .” 2013. Web. 13 Dec 2019.

Vancouver:

Cvrček J. Zápustkové kování pastorku . [Internet] [Thesis]. Brno University of Technology; 2013. [cited 2019 Dec 13]. Available from: http://hdl.handle.net/11012/20286.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Cvrček J. Zápustkové kování pastorku . [Thesis]. Brno University of Technology; 2013. Available from: http://hdl.handle.net/11012/20286

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation


University of Waterloo

12. Abesin Kodippili, Tharindu. Hot Forging Tool Design for a Magnesium Alloy Front Lower Control Arm.

Degree: 2018, University of Waterloo

 In an effort to improve fuel economy standards in the automotive industry, the use of lightweight materials to manufacture fatigue-critical components is investigated by a… (more)

Subjects/Keywords: Hot Forging Tool Design

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Abesin Kodippili, T. (2018). Hot Forging Tool Design for a Magnesium Alloy Front Lower Control Arm. (Thesis). University of Waterloo. Retrieved from http://hdl.handle.net/10012/14032

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16th Edition):

Abesin Kodippili, Tharindu. “Hot Forging Tool Design for a Magnesium Alloy Front Lower Control Arm.” 2018. Thesis, University of Waterloo. Accessed December 13, 2019. http://hdl.handle.net/10012/14032.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7th Edition):

Abesin Kodippili, Tharindu. “Hot Forging Tool Design for a Magnesium Alloy Front Lower Control Arm.” 2018. Web. 13 Dec 2019.

Vancouver:

Abesin Kodippili T. Hot Forging Tool Design for a Magnesium Alloy Front Lower Control Arm. [Internet] [Thesis]. University of Waterloo; 2018. [cited 2019 Dec 13]. Available from: http://hdl.handle.net/10012/14032.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Abesin Kodippili T. Hot Forging Tool Design for a Magnesium Alloy Front Lower Control Arm. [Thesis]. University of Waterloo; 2018. Available from: http://hdl.handle.net/10012/14032

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation


Michigan State University

13. Lederer, John F. A survey of metallurgical problems in the forging industry.

Degree: MS, 1957, Michigan State University

Subjects/Keywords: Forging; Metallurgy

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Lederer, J. F. (1957). A survey of metallurgical problems in the forging industry. (Masters Thesis). Michigan State University. Retrieved from http://etd.lib.msu.edu/islandora/object/etd:11411

Chicago Manual of Style (16th Edition):

Lederer, John F. “A survey of metallurgical problems in the forging industry.” 1957. Masters Thesis, Michigan State University. Accessed December 13, 2019. http://etd.lib.msu.edu/islandora/object/etd:11411.

MLA Handbook (7th Edition):

Lederer, John F. “A survey of metallurgical problems in the forging industry.” 1957. Web. 13 Dec 2019.

Vancouver:

Lederer JF. A survey of metallurgical problems in the forging industry. [Internet] [Masters thesis]. Michigan State University; 1957. [cited 2019 Dec 13]. Available from: http://etd.lib.msu.edu/islandora/object/etd:11411.

Council of Science Editors:

Lederer JF. A survey of metallurgical problems in the forging industry. [Masters Thesis]. Michigan State University; 1957. Available from: http://etd.lib.msu.edu/islandora/object/etd:11411


Universidade do Rio Grande do Sul

14. Brites, Fabiano da Silva. Desenvolvimento integrado de produto para forjamento.

Degree: 2009, Universidade do Rio Grande do Sul

Este trabalho tem como objetivo apresentar e aplicar uma metodologia de desenvolvimento integrado de produto para forjamento, baseada na integração efetiva do conhecimento científico e… (more)

Subjects/Keywords: Desenvolvimento de produto; Forging; Forjamento; Product development; Forging simulation; Simufact.Forming 8.1

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Brites, F. d. S. (2009). Desenvolvimento integrado de produto para forjamento. (Thesis). Universidade do Rio Grande do Sul. Retrieved from http://hdl.handle.net/10183/18594

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16th Edition):

Brites, Fabiano da Silva. “Desenvolvimento integrado de produto para forjamento.” 2009. Thesis, Universidade do Rio Grande do Sul. Accessed December 13, 2019. http://hdl.handle.net/10183/18594.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7th Edition):

Brites, Fabiano da Silva. “Desenvolvimento integrado de produto para forjamento.” 2009. Web. 13 Dec 2019.

Vancouver:

Brites FdS. Desenvolvimento integrado de produto para forjamento. [Internet] [Thesis]. Universidade do Rio Grande do Sul; 2009. [cited 2019 Dec 13]. Available from: http://hdl.handle.net/10183/18594.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Brites FdS. Desenvolvimento integrado de produto para forjamento. [Thesis]. Universidade do Rio Grande do Sul; 2009. Available from: http://hdl.handle.net/10183/18594

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation


Brno University of Technology

15. Bradáč, Tomáš. Zápustkové kování ozubeného kola .

Degree: 2010, Brno University of Technology

 Diplomová práce vypracovaná v rámci magisterského studia předkládá návrh technologie výroby ozubeného kola pomocí zápustkového kování. Součást je z oceli 14 220.0 (16MnCr5). Polotovar je… (more)

Subjects/Keywords: Zápustkové kování; výkovek; ozubené kolo; svislý kovací lis; Drop forging; forging; gear wheel; vertical forging press

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Bradáč, T. (2010). Zápustkové kování ozubeného kola . (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/16277

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16th Edition):

Bradáč, Tomáš. “Zápustkové kování ozubeného kola .” 2010. Thesis, Brno University of Technology. Accessed December 13, 2019. http://hdl.handle.net/11012/16277.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7th Edition):

Bradáč, Tomáš. “Zápustkové kování ozubeného kola .” 2010. Web. 13 Dec 2019.

Vancouver:

Bradáč T. Zápustkové kování ozubeného kola . [Internet] [Thesis]. Brno University of Technology; 2010. [cited 2019 Dec 13]. Available from: http://hdl.handle.net/11012/16277.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Bradáč T. Zápustkové kování ozubeného kola . [Thesis]. Brno University of Technology; 2010. Available from: http://hdl.handle.net/11012/16277

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation


Brno University of Technology

16. Martinovský, Peter. Výroba posuvného unašeče objemovým tvářením .

Degree: 2012, Brno University of Technology

 Projekt vypracovaný v rámci bakalárskeho štúdia predkladá návrh technológie výroby posuvného unašača pomocou zápustkového kovania. Na základe literárnej štúdie z problematiky objemového tvarovania a výpočtov… (more)

Subjects/Keywords: Objemové tvarovanie; výkovok; zápustkové kovanie; zvislí kováčsky lis; Solid forming; forging; drop forging; vertical forging press

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Martinovský, P. (2012). Výroba posuvného unašeče objemovým tvářením . (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/5820

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16th Edition):

Martinovský, Peter. “Výroba posuvného unašeče objemovým tvářením .” 2012. Thesis, Brno University of Technology. Accessed December 13, 2019. http://hdl.handle.net/11012/5820.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7th Edition):

Martinovský, Peter. “Výroba posuvného unašeče objemovým tvářením .” 2012. Web. 13 Dec 2019.

Vancouver:

Martinovský P. Výroba posuvného unašeče objemovým tvářením . [Internet] [Thesis]. Brno University of Technology; 2012. [cited 2019 Dec 13]. Available from: http://hdl.handle.net/11012/5820.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Martinovský P. Výroba posuvného unašeče objemovým tvářením . [Thesis]. Brno University of Technology; 2012. Available from: http://hdl.handle.net/11012/5820

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation


Brno University of Technology

17. Vaško, Michal. Technologie zápustkového kování hřídele .

Degree: 2010, Brno University of Technology

 Tato diplomová práce pojednává o návrhu technologie výroby rotační součásti hřídele pomocí zápustkového kování. Jedná se o technologii objemového tváření na svislých kovacích lisech. V… (more)

Subjects/Keywords: Kování; výkovek; zápustka; výronková drážka; buchar; kovací lis; Forging; forging; die; fin groove; hammer; forging press

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Vaško, M. (2010). Technologie zápustkového kování hřídele . (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/13402

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16th Edition):

Vaško, Michal. “Technologie zápustkového kování hřídele .” 2010. Thesis, Brno University of Technology. Accessed December 13, 2019. http://hdl.handle.net/11012/13402.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7th Edition):

Vaško, Michal. “Technologie zápustkového kování hřídele .” 2010. Web. 13 Dec 2019.

Vancouver:

Vaško M. Technologie zápustkového kování hřídele . [Internet] [Thesis]. Brno University of Technology; 2010. [cited 2019 Dec 13]. Available from: http://hdl.handle.net/11012/13402.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Vaško M. Technologie zápustkového kování hřídele . [Thesis]. Brno University of Technology; 2010. Available from: http://hdl.handle.net/11012/13402

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation


Brno University of Technology

18. Ondráček, Miroslav. Technologie zápustkového kování držáku blatníku .

Degree: 2010, Brno University of Technology

 Diplomová práce pojednává o problematice zápustkového kování. Je zde zpracována podrobná literární studie, ve které jsou podklady pro vypracování zadané součásti – držáku blatníku. Jsou… (more)

Subjects/Keywords: Držák blatníku; zápustkové kování; zápustka; kovací lis; výkovek; výronek; Mudguard holder; drop forging; die; press forging; forging; fin

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Ondráček, M. (2010). Technologie zápustkového kování držáku blatníku . (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/12089

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16th Edition):

Ondráček, Miroslav. “Technologie zápustkového kování držáku blatníku .” 2010. Thesis, Brno University of Technology. Accessed December 13, 2019. http://hdl.handle.net/11012/12089.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7th Edition):

Ondráček, Miroslav. “Technologie zápustkového kování držáku blatníku .” 2010. Web. 13 Dec 2019.

Vancouver:

Ondráček M. Technologie zápustkového kování držáku blatníku . [Internet] [Thesis]. Brno University of Technology; 2010. [cited 2019 Dec 13]. Available from: http://hdl.handle.net/11012/12089.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Ondráček M. Technologie zápustkového kování držáku blatníku . [Thesis]. Brno University of Technology; 2010. Available from: http://hdl.handle.net/11012/12089

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation


Brno University of Technology

19. Kaděra, Jakub. Výroba dolního tělesa objemovým tvářením .

Degree: 2010, Brno University of Technology

 Tato diplomová práce, která je vypracovaná v rámci navazujícího magisterského studia oboru strojírenská technologie a průmyslový management (2303T005) předkládá návrh technologie výroby dolního tělesa objemovým… (more)

Subjects/Keywords: Klikový kovací lis; mzdy; náklady; výkovek; zápustka; zápustkové kování; Crank forging press; wages; costs; forging; die; drop forging

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Kaděra, J. (2010). Výroba dolního tělesa objemovým tvářením . (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/15257

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16th Edition):

Kaděra, Jakub. “Výroba dolního tělesa objemovým tvářením .” 2010. Thesis, Brno University of Technology. Accessed December 13, 2019. http://hdl.handle.net/11012/15257.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7th Edition):

Kaděra, Jakub. “Výroba dolního tělesa objemovým tvářením .” 2010. Web. 13 Dec 2019.

Vancouver:

Kaděra J. Výroba dolního tělesa objemovým tvářením . [Internet] [Thesis]. Brno University of Technology; 2010. [cited 2019 Dec 13]. Available from: http://hdl.handle.net/11012/15257.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Kaděra J. Výroba dolního tělesa objemovým tvářením . [Thesis]. Brno University of Technology; 2010. Available from: http://hdl.handle.net/11012/15257

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation


Texas A&M University

20. Feng, Zhujian. On Extrusion Forging and Extrusion Rolling of Thin Metal Sheets.

Degree: 2013, Texas A&M University

 Sheet metal surfaces with pin-fin features have potential fluid and thermal applications. Extrusion forging process and extrusion rolling process can be used to create such… (more)

Subjects/Keywords: Extrusion forging; extrusion rolling; sheet metal

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Feng, Z. (2013). On Extrusion Forging and Extrusion Rolling of Thin Metal Sheets. (Thesis). Texas A&M University. Retrieved from http://hdl.handle.net/1969.1/149261

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16th Edition):

Feng, Zhujian. “On Extrusion Forging and Extrusion Rolling of Thin Metal Sheets.” 2013. Thesis, Texas A&M University. Accessed December 13, 2019. http://hdl.handle.net/1969.1/149261.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7th Edition):

Feng, Zhujian. “On Extrusion Forging and Extrusion Rolling of Thin Metal Sheets.” 2013. Web. 13 Dec 2019.

Vancouver:

Feng Z. On Extrusion Forging and Extrusion Rolling of Thin Metal Sheets. [Internet] [Thesis]. Texas A&M University; 2013. [cited 2019 Dec 13]. Available from: http://hdl.handle.net/1969.1/149261.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Feng Z. On Extrusion Forging and Extrusion Rolling of Thin Metal Sheets. [Thesis]. Texas A&M University; 2013. Available from: http://hdl.handle.net/1969.1/149261

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation


The Ohio State University

21. Liu, Chun. Modeling of water and lubricant sprays in hot metal working.

Degree: PhD, Industrial and Systems Engineering, 2007, The Ohio State University

 Spray cooling and lubrication are used in hot metal working such as forging industry. Proper selection of lubricant spray and cooling helps increase die life,… (more)

Subjects/Keywords: Spray; Heat transfer; Lubrication; Forging; Modeling

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Liu, C. (2007). Modeling of water and lubricant sprays in hot metal working. (Doctoral Dissertation). The Ohio State University. Retrieved from http://rave.ohiolink.edu/etdc/view?acc_num=osu1196091214

Chicago Manual of Style (16th Edition):

Liu, Chun. “Modeling of water and lubricant sprays in hot metal working.” 2007. Doctoral Dissertation, The Ohio State University. Accessed December 13, 2019. http://rave.ohiolink.edu/etdc/view?acc_num=osu1196091214.

MLA Handbook (7th Edition):

Liu, Chun. “Modeling of water and lubricant sprays in hot metal working.” 2007. Web. 13 Dec 2019.

Vancouver:

Liu C. Modeling of water and lubricant sprays in hot metal working. [Internet] [Doctoral dissertation]. The Ohio State University; 2007. [cited 2019 Dec 13]. Available from: http://rave.ohiolink.edu/etdc/view?acc_num=osu1196091214.

Council of Science Editors:

Liu C. Modeling of water and lubricant sprays in hot metal working. [Doctoral Dissertation]. The Ohio State University; 2007. Available from: http://rave.ohiolink.edu/etdc/view?acc_num=osu1196091214

22. Wheatley, Leesa. Forging Ireland: German Travel Literature 1785-1850.

Degree: 2015, RIAN

 This study discerns the patterns of perception and the modes of representation that underlie the manner in which German travel writers portrayed Ireland and the… (more)

Subjects/Keywords: Forging Ireland; German Travel Literature; 1785-1850

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Wheatley, L. (2015). Forging Ireland: German Travel Literature 1785-1850. (Thesis). RIAN. Retrieved from http://eprints.maynoothuniversity.ie/10388/

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16th Edition):

Wheatley, Leesa. “Forging Ireland: German Travel Literature 1785-1850.” 2015. Thesis, RIAN. Accessed December 13, 2019. http://eprints.maynoothuniversity.ie/10388/.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7th Edition):

Wheatley, Leesa. “Forging Ireland: German Travel Literature 1785-1850.” 2015. Web. 13 Dec 2019.

Vancouver:

Wheatley L. Forging Ireland: German Travel Literature 1785-1850. [Internet] [Thesis]. RIAN; 2015. [cited 2019 Dec 13]. Available from: http://eprints.maynoothuniversity.ie/10388/.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Wheatley L. Forging Ireland: German Travel Literature 1785-1850. [Thesis]. RIAN; 2015. Available from: http://eprints.maynoothuniversity.ie/10388/

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation


Brno University of Technology

23. Máčala, Daniel. Problematika volného kování .

Degree: 2017, Brno University of Technology

 Práce předkládá přehled o problematice volného kování. Je vytvořena na základě literární studie teoretického základu s doplněním obrázků k dané problematice. Pojednává obecně o volném… (more)

Subjects/Keywords: kování; volné kování; ingot; prodlužování; pěchování; forging; open die forging; ingot; fullering; upsetting

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Máčala, D. (2017). Problematika volného kování . (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/65832

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16th Edition):

Máčala, Daniel. “Problematika volného kování .” 2017. Thesis, Brno University of Technology. Accessed December 13, 2019. http://hdl.handle.net/11012/65832.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7th Edition):

Máčala, Daniel. “Problematika volného kování .” 2017. Web. 13 Dec 2019.

Vancouver:

Máčala D. Problematika volného kování . [Internet] [Thesis]. Brno University of Technology; 2017. [cited 2019 Dec 13]. Available from: http://hdl.handle.net/11012/65832.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Máčala D. Problematika volného kování . [Thesis]. Brno University of Technology; 2017. Available from: http://hdl.handle.net/11012/65832

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation


Brno University of Technology

24. Šimon, Miroslav. Výroba držáku objemovým tvářením .

Degree: 2012, Brno University of Technology

 Cílem diplomové práce bylo navržení nejvýhodnějšího technologického postupu výroby zadané součásti objemovým tvářením. Práce obsahuje literární studii, která je zdrojem informací pro samotné řešení. Cílem… (more)

Subjects/Keywords: objemové tváření; zápustkové kování; výkovek; zápustka; držák; solid forming; drop forging; forging; die; holder

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Šimon, M. (2012). Výroba držáku objemovým tvářením . (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/4360

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16th Edition):

Šimon, Miroslav. “Výroba držáku objemovým tvářením .” 2012. Thesis, Brno University of Technology. Accessed December 13, 2019. http://hdl.handle.net/11012/4360.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7th Edition):

Šimon, Miroslav. “Výroba držáku objemovým tvářením .” 2012. Web. 13 Dec 2019.

Vancouver:

Šimon M. Výroba držáku objemovým tvářením . [Internet] [Thesis]. Brno University of Technology; 2012. [cited 2019 Dec 13]. Available from: http://hdl.handle.net/11012/4360.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Šimon M. Výroba držáku objemovým tvářením . [Thesis]. Brno University of Technology; 2012. Available from: http://hdl.handle.net/11012/4360

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation


University of Waterloo

25. Paracha, Talal. Modelling of the Forging Process for a Magnesium Alloy Automotive Control Arm.

Degree: 2018, University of Waterloo

 The automotive industry has placed significant emphasis on weight reduction to achieve better fuel economy while maintaining safety and quality standards. One way this can… (more)

Subjects/Keywords: Forging; Magnesium Alloy; Mathematical Modelling; Forging Process Design; Preform Design; AZ80; ZK60; DEFORM 3D

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Paracha, T. (2018). Modelling of the Forging Process for a Magnesium Alloy Automotive Control Arm. (Thesis). University of Waterloo. Retrieved from http://hdl.handle.net/10012/13216

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16th Edition):

Paracha, Talal. “Modelling of the Forging Process for a Magnesium Alloy Automotive Control Arm.” 2018. Thesis, University of Waterloo. Accessed December 13, 2019. http://hdl.handle.net/10012/13216.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7th Edition):

Paracha, Talal. “Modelling of the Forging Process for a Magnesium Alloy Automotive Control Arm.” 2018. Web. 13 Dec 2019.

Vancouver:

Paracha T. Modelling of the Forging Process for a Magnesium Alloy Automotive Control Arm. [Internet] [Thesis]. University of Waterloo; 2018. [cited 2019 Dec 13]. Available from: http://hdl.handle.net/10012/13216.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Paracha T. Modelling of the Forging Process for a Magnesium Alloy Automotive Control Arm. [Thesis]. University of Waterloo; 2018. Available from: http://hdl.handle.net/10012/13216

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation


Brno University of Technology

26. Novák, Libor. Stroje používané při volném kování .

Degree: 2014, Brno University of Technology

 Při výrobě součásti volným kováním se používají buchary a hydraulické lisy. Práce obsahuje jejich rozdělení, stručný popis, výhody a nevýhody a u konkrétních typů bucharů… (more)

Subjects/Keywords: Buchar; hydraulický lis; volné kování; Forging hammer; hydraulic press; open die forging

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Novák, L. (2014). Stroje používané při volném kování . (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/32720

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16th Edition):

Novák, Libor. “Stroje používané při volném kování .” 2014. Thesis, Brno University of Technology. Accessed December 13, 2019. http://hdl.handle.net/11012/32720.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7th Edition):

Novák, Libor. “Stroje používané při volném kování .” 2014. Web. 13 Dec 2019.

Vancouver:

Novák L. Stroje používané při volném kování . [Internet] [Thesis]. Brno University of Technology; 2014. [cited 2019 Dec 13]. Available from: http://hdl.handle.net/11012/32720.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Novák L. Stroje používané při volném kování . [Thesis]. Brno University of Technology; 2014. Available from: http://hdl.handle.net/11012/32720

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation


Brno University of Technology

27. Žižka, Jiří. Problematika zápustkového kování na bucharech .

Degree: 2018, Brno University of Technology

 Tato práce se zabývá problematikou zápustkového kování na bucharech, což je technologie využívaná především pro výrobu tvarově a výskově různorodých a členitých součástí s žebry… (more)

Subjects/Keywords: tváření; kování; zápustkové kování; zápustka; buchar; forming; forging; die forging; die; hammer

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Žižka, J. (2018). Problematika zápustkového kování na bucharech . (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/83231

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16th Edition):

Žižka, Jiří. “Problematika zápustkového kování na bucharech .” 2018. Thesis, Brno University of Technology. Accessed December 13, 2019. http://hdl.handle.net/11012/83231.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7th Edition):

Žižka, Jiří. “Problematika zápustkového kování na bucharech .” 2018. Web. 13 Dec 2019.

Vancouver:

Žižka J. Problematika zápustkového kování na bucharech . [Internet] [Thesis]. Brno University of Technology; 2018. [cited 2019 Dec 13]. Available from: http://hdl.handle.net/11012/83231.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Žižka J. Problematika zápustkového kování na bucharech . [Thesis]. Brno University of Technology; 2018. Available from: http://hdl.handle.net/11012/83231

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation


Brno University of Technology

28. Moudrý, Michal. Výroba výkovku držáku rejdového čepu .

Degree: 2011, Brno University of Technology

 MOUDRÝ Michal: Výroba výkovku držáku rejdového čepu. Projekt vypracovaný v rámci inženýrského studia oboru 2307 předkládá návrh technologie výroby držáku rejdového čepu objemovým tvářením z… (more)

Subjects/Keywords: objemové tváření; zápustkové kování; ocelový výkovek; držák; solid forming; die forging; steel forging; holder

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Moudrý, M. (2011). Výroba výkovku držáku rejdového čepu . (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/791

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16th Edition):

Moudrý, Michal. “Výroba výkovku držáku rejdového čepu .” 2011. Thesis, Brno University of Technology. Accessed December 13, 2019. http://hdl.handle.net/11012/791.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7th Edition):

Moudrý, Michal. “Výroba výkovku držáku rejdového čepu .” 2011. Web. 13 Dec 2019.

Vancouver:

Moudrý M. Výroba výkovku držáku rejdového čepu . [Internet] [Thesis]. Brno University of Technology; 2011. [cited 2019 Dec 13]. Available from: http://hdl.handle.net/11012/791.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Moudrý M. Výroba výkovku držáku rejdového čepu . [Thesis]. Brno University of Technology; 2011. Available from: http://hdl.handle.net/11012/791

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation


Brno University of Technology

29. Nejedlý, Petr. Výroba držáku objemovým tvářením .

Degree: 2010, Brno University of Technology

 Projekt vypracovaný v rámci inženýrského studia oboru 2307 předkládá návrh technologie výroby držáku objemovým tvářením z oceli 12 020.0. Na základě literární studie problematiky zápustkového… (more)

Subjects/Keywords: objemové tváření; zápustkové kování; ocelový výkovek; držák; solid forming; die forging; steel forging; holder

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Nejedlý, P. (2010). Výroba držáku objemovým tvářením . (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/15222

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16th Edition):

Nejedlý, Petr. “Výroba držáku objemovým tvářením .” 2010. Thesis, Brno University of Technology. Accessed December 13, 2019. http://hdl.handle.net/11012/15222.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7th Edition):

Nejedlý, Petr. “Výroba držáku objemovým tvářením .” 2010. Web. 13 Dec 2019.

Vancouver:

Nejedlý P. Výroba držáku objemovým tvářením . [Internet] [Thesis]. Brno University of Technology; 2010. [cited 2019 Dec 13]. Available from: http://hdl.handle.net/11012/15222.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Nejedlý P. Výroba držáku objemovým tvářením . [Thesis]. Brno University of Technology; 2010. Available from: http://hdl.handle.net/11012/15222

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation


Brno University of Technology

30. Bursík, Miroslav. Otočný zvedací stůl QHZ 20 .

Degree: 2011, Brno University of Technology

 Tato diplomová práce se zabývá návrhem nové koncepce otočného zvedacího stolu QHZ 20. Hlavním cílem je snížení zástavbové hloubky stolu. Součástí práce je rešerše jednotlivých… (more)

Subjects/Keywords: Kovací soubor; kovací lis CKW; otočný zvedací stůl QHZ; hydraulický válec - plunžr; ingot; výkovek.; Forging complex; forging press CKW; lifting turntable QHZ; hydraulic cylinder - plunger; ingot; forging.

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Bursík, M. (2011). Otočný zvedací stůl QHZ 20 . (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/4561

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16th Edition):

Bursík, Miroslav. “Otočný zvedací stůl QHZ 20 .” 2011. Thesis, Brno University of Technology. Accessed December 13, 2019. http://hdl.handle.net/11012/4561.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7th Edition):

Bursík, Miroslav. “Otočný zvedací stůl QHZ 20 .” 2011. Web. 13 Dec 2019.

Vancouver:

Bursík M. Otočný zvedací stůl QHZ 20 . [Internet] [Thesis]. Brno University of Technology; 2011. [cited 2019 Dec 13]. Available from: http://hdl.handle.net/11012/4561.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Bursík M. Otočný zvedací stůl QHZ 20 . [Thesis]. Brno University of Technology; 2011. Available from: http://hdl.handle.net/11012/4561

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

[1] [2] [3] [4] [5] [6] [7] [8]

.