subject:(Five phase stepper motor)

1. Anitha karthi. Design and implementation of digital micro step controller for five phase stepper motor;.

Degree: Digital micro step controller for five phase stepper motor, 2014, Anna University

URL: http://shodhganga.inflibnet.ac.in/handle/10603/16157

Reference p138-146, Appendix p.122-137. Advisors/Committee Members: Paranjothi S R.

Subjects/Keywords: Digital micro step controller; Electrical engineering; Five phase stepper motor; MATLAB 2009b

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

karthi, A. (2014). Design and implementation of digital micro step controller for five phase stepper motor;. (Thesis). Anna University. Retrieved from http://shodhganga.inflibnet.ac.in/handle/10603/16157

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

karthi, Anitha. “Design and implementation of digital micro step controller for five phase stepper motor;.” 2014. Thesis, Anna University. Accessed January 16, 2021. http://shodhganga.inflibnet.ac.in/handle/10603/16157.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

karthi, Anitha. “Design and implementation of digital micro step controller for five phase stepper motor;.” 2014. Web. 16 Jan 2021.

Vancouver:

karthi A. Design and implementation of digital micro step controller for five phase stepper motor;. [Internet] [Thesis]. Anna University; 2014. [cited 2021 Jan 16]. Available from: http://shodhganga.inflibnet.ac.in/handle/10603/16157.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

karthi A. Design and implementation of digital micro step controller for five phase stepper motor;. [Thesis]. Anna University; 2014. Available from: http://shodhganga.inflibnet.ac.in/handle/10603/16157

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

2. Morávek, Lukáš. Elektrický pohon pro ovládání 3f. autotransformátoru: Electric actuator for 3p. autotransformer.

Degree: 2019, Brno University of Technology

URL: http://hdl.handle.net/11012/33594

► Bachelor’s thesis concerns the selection of the type of electric motor and designed circuit diagrams and printed circuit boards for power, control and power supply… (more)

Subjects/Keywords: elektrický pohon; trojfázový autotransformátor; krokový motor; electric actuator; three-phase autotransformer; stepper motor

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Morávek, L. (2019). Elektrický pohon pro ovládání 3f. autotransformátoru: Electric actuator for 3p. autotransformer. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/33594

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Morávek, Lukáš. “Elektrický pohon pro ovládání 3f. autotransformátoru: Electric actuator for 3p. autotransformer.” 2019. Thesis, Brno University of Technology. Accessed January 16, 2021. http://hdl.handle.net/11012/33594.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Morávek, Lukáš. “Elektrický pohon pro ovládání 3f. autotransformátoru: Electric actuator for 3p. autotransformer.” 2019. Web. 16 Jan 2021.

Vancouver:

Morávek L. Elektrický pohon pro ovládání 3f. autotransformátoru: Electric actuator for 3p. autotransformer. [Internet] [Thesis]. Brno University of Technology; 2019. [cited 2021 Jan 16]. Available from: http://hdl.handle.net/11012/33594.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Morávek L. Elektrický pohon pro ovládání 3f. autotransformátoru: Electric actuator for 3p. autotransformer. [Thesis]. Brno University of Technology; 2019. Available from: http://hdl.handle.net/11012/33594

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Linköping University

3. Karlsson, Lina. Sensorless Control of a Hybrid Stepper Motor.

Degree: Vehicular Systems, 2016, Linköping University

URL: http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-129433

► Electrical drives are widely used in today’s society. They can be found in bothhousehold products and in the industry. One application where electrical drivesare… (more)

▼ Electrical drives are widely used in today’s society. They can be found in bothhousehold products and in the industry. One application where electrical drivesare used is in robots for mowing lawns. In the studied robots the motors in theelectrical drives used for propulsion are Brush Less Direct Current motors, BLDCmotors.The BLDC-motor has its maximum torque at high speeds and thereforea gearbox is needed. The gearbox is space consuming, add costs and consists ofmechanical parts that wear during use. Of interest is therefore to investigate ifthere are other electrical drives which can be used for propulsion.A motor who has its maximum torque at low speeds is the Stepper motor, andtherefore it is of interest to investigate if a stepper motor could replace the BLDCmotor.A drawback with the stepper motor is that it always consumes maximumcurrent and therefore a current controller is beneficial. Together with currentcontrol, speed control is needed to make the robot run at desired speed. To beable to perform an accurate current and speed control feedback from the motor isneeded. Information about the rotor angle and velocity can be used for the speedcontrol and the load angle can be used for the current control since the current isproportional to the load torque.To estimate the rotor angle and velocity a model has been developed. Themodel is based on fundamental electrical and mechanical equations and neglectsthe current and position dependence of the inductance and flux linkage. To completethe model three motor parameters, the maximum detent torque Tdm, themaximum flux linkage m and the friction constant B was determined. Parameterdetermination was done by linear regression and by using an Extended KalmanFilter, EKF. The result of the parameter determination were Tdm = 0.2152 Nm, m = -0.002854 Vs/rad and B = 0.01186 Nms/rad.The model is used in an EKF to estimate the rotor angle and angular velocity.The result of the implemented EKF seems promising. When making the rotortake a step in velocity from 3.927 rad/s to 7.85 rad/s the EKF estimates the stateswith only a small bias: 0.02 rad for the angle, 0.3 rad/s for the velocity, 0.005 Afor phase a current and 0.0004 A for phase b current.To estimate the load angle the Sliding Discrete Fourier Transform is used. Theexpected relation between the load torque and load angle is sinusoidal. The loadangle is calculated from data where the external load is between 0-2.5 Nm. Inthat area the load angle shows the expected sinusoidal appearance and the loadangle is in the area between 0.1 and 0.45 rad. At 3 Nm the rotor stalls and it isshown that the load angle varies between 0 and 2 rad when the rotor is stalled.

Subjects/Keywords: Hybrid Stepper Motor

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Karlsson, L. (2016). Sensorless Control of a Hybrid Stepper Motor. (Thesis). Linköping University. Retrieved from http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-129433

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Karlsson, Lina. “Sensorless Control of a Hybrid Stepper Motor.” 2016. Thesis, Linköping University. Accessed January 16, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-129433.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Karlsson, Lina. “Sensorless Control of a Hybrid Stepper Motor.” 2016. Web. 16 Jan 2021.

Vancouver:

Karlsson L. Sensorless Control of a Hybrid Stepper Motor. [Internet] [Thesis]. Linköping University; 2016. [cited 2021 Jan 16]. Available from: http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-129433.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Karlsson L. Sensorless Control of a Hybrid Stepper Motor. [Thesis]. Linköping University; 2016. Available from: http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-129433

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Universidade do Rio Grande do Sul

4. Nicol, Guilherme. Análise de estratégias de controle para máquinas pentafásicas operando sob falha.

Degree: 2015, Universidade do Rio Grande do Sul

URL: http://hdl.handle.net/10183/131056

►

São desenvolvidos neste trabalho dois modelos para a máquina pentafásica operando sob falta em uma e duas fases. Um dos modelos é apropriado para simulações,… (more)

▼

São desenvolvidos neste trabalho dois modelos para a máquina pentafásica operando sob falta em uma e duas fases. Um dos modelos é apropriado para simulações, pois permite que uma ou mais fases sejam retiradas durante a simulação. O outro modelo possui uma falta fixa sendo mais indicado para a análise da máquina quando a mesma opera sem uma fase. Neste trabalho também é feita a análise de duas estratégias de controle para máquinas operando sem uma fase. Uma das estratégias de controle é do tipo vetorial e a outra do tipo escalar. A estratégia de controle escalar é nova e foi desenvolvida durante a dissertação, a estratégia de controle vetorial foi baseada em estratégias de controle analisadas durante a revisão bibliográfica. Inicialmente é feita um revisão bibliográfica onde são analisados os principais trabalhos na área de controle de máquinas com mais de três fases. Depois é desenvolvido o modelo da máquina utilizado durante as simulações das estratégias de controle. O controle de máquinas por orientação de campo indireta é então apresentado e são explicadas as modificações necessárias para que o controle seja aplicado em máquinas sem uma ou duas fases. Na sequência são desenvolvidos o controle escalar para a máquina operando sem uma fase e o segundo modelo da máquina, com a falta fixa. No último capítulo são apresentadas as simulações e ensaios realizados utilizando as estratégia de controle e a máquina operando sem uma fase.

In this work two models for the five-phase machine operating under fault are developed. One of them is more appropriate for simulations, as it allows one or more phases to be easily removed. The other model describes the machine operation with one open phase, being more appropriate for analytical analysis under this condition. This works also analysis two control strategies for operation under fault. One strategy is based on the scalar control and the other on the vector control of induction machines. The scalar control strategy is new and was formulated during the development of this work. The vector control strategy was based on control strategies already used and found in the literature. First, a literature review is presented, followed by the derivation of the model which is used for the subsequent simulations of the control strategies. Then, the machine control through indirect field orientation is presented, as well as the necessary modifications to be implemented in the control strategy to enable the machine to operate without one or two phases. Next, a scalar control to operate the machine without one phase using the second model is presented. Finally, the simulations and the experimental results obtained with a prototype machine and using the control strategies studied are shown and compared, considering the case of one open phases.

Advisors/Committee Members: Pereira, Luís Alberto.

Subjects/Keywords: Induction machine; Motor de indução : Controle; Five phase; Fault; Control

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Nicol, G. (2015). Análise de estratégias de controle para máquinas pentafásicas operando sob falha. (Thesis). Universidade do Rio Grande do Sul. Retrieved from http://hdl.handle.net/10183/131056

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Nicol, Guilherme. “Análise de estratégias de controle para máquinas pentafásicas operando sob falha.” 2015. Thesis, Universidade do Rio Grande do Sul. Accessed January 16, 2021. http://hdl.handle.net/10183/131056.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Nicol, Guilherme. “Análise de estratégias de controle para máquinas pentafásicas operando sob falha.” 2015. Web. 16 Jan 2021.

Vancouver:

Nicol G. Análise de estratégias de controle para máquinas pentafásicas operando sob falha. [Internet] [Thesis]. Universidade do Rio Grande do Sul; 2015. [cited 2021 Jan 16]. Available from: http://hdl.handle.net/10183/131056.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Nicol G. Análise de estratégias de controle para máquinas pentafásicas operando sob falha. [Thesis]. Universidade do Rio Grande do Sul; 2015. Available from: http://hdl.handle.net/10183/131056

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

5. Balakrishnan K. Investigation and resonance compensation in hybrid stepper motor;.

Degree: Resonance compensation in hybrid stepper motor, 2014, Anna University

URL: http://shodhganga.inflibnet.ac.in/handle/10603/16158

►

Hybrid Stepper Motors (HSM) are mainly used for precise newlineposition control applications, due to their durability, small step angle and newlineability to operate in open… (more)

▼

Hybrid Stepper Motors (HSM) are mainly used for precise newlineposition control applications, due to their durability, small step angle and newlineability to operate in open loop. The stepping rate normally follows the newlineexcitation rate. However, at certain speeds vibration and resonance are noted newlinewhich may lead to missing of steps. The machine vibrates excessively when newlinethe excitation frequency matches the natural frequency leading to oscillations newlineknown as resonance. It is also influenced by electrical parameters like newlineinductance and resistance of the motor. This behavior of the HSM nullifies the newlinepossible open loop control and hence this needs to be addressed. Excitation schemes like full step and half step modes can be newlinegenerated with simple digital devices which is another major attraction in the newlineuse of stepper motors. More sophisticated micro step kind of excitation is also newlineemployed to obtain smooth operation. For a given stepper motor, prediction of newlinespeed at which resonance occurs is challenging. newlinePrecise position control may be possible with direct mechanical newlinemeasurement, where the resonance can be identified easily. Mechanical newlinemeasurements include rotor position, speed and torque using sensors, which newlineadd to additional cost for required resolution and precision. Modern approach is to use electrical measurements to estimate newlinemechanical variables. Electrical measurements include the measurement of newlinephase current and excitation voltage. The motivation of this research work has newlinebeen to identify resonance through electrical measurements. Phase current is newlineobserved for various speeds and load conditions and it is found that the current newlinecarries information to distinguish Resonance (R) and Non-Resonance (NR) newlineconditions. Suitable schemes are proposed to investigate the phase current for newlineresonance identification and resonance compensation. The wave shape of the newlineobserved phase current is found altered during resonance condition. As a first approach, harmonic contents of phase currents are newlineobserved. newline newline

Reference p163-170, Appendix p.159-162.

Advisors/Committee Members: Umamaheswari B.

Subjects/Keywords: Electrical engineering; Hybrid stepper motor

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

K, B. (2014). Investigation and resonance compensation in hybrid stepper motor;. (Thesis). Anna University. Retrieved from http://shodhganga.inflibnet.ac.in/handle/10603/16158

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

K, Balakrishnan. “Investigation and resonance compensation in hybrid stepper motor;.” 2014. Thesis, Anna University. Accessed January 16, 2021. http://shodhganga.inflibnet.ac.in/handle/10603/16158.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

K, Balakrishnan. “Investigation and resonance compensation in hybrid stepper motor;.” 2014. Web. 16 Jan 2021.

Vancouver:

K B. Investigation and resonance compensation in hybrid stepper motor;. [Internet] [Thesis]. Anna University; 2014. [cited 2021 Jan 16]. Available from: http://shodhganga.inflibnet.ac.in/handle/10603/16158.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

K B. Investigation and resonance compensation in hybrid stepper motor;. [Thesis]. Anna University; 2014. Available from: http://shodhganga.inflibnet.ac.in/handle/10603/16158

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

6. Macek, Daniel. Modelování a řízení krokového motoru v prostředí MATLAB/Simulink: Modeling and control of stepper motor in MATLAB/Simulink.

Degree: 2019, Brno University of Technology

URL: http://hdl.handle.net/11012/67005

► The work deals with describing the types of stepper motors, as a method of their controlling, their potential method of modelling each type of motors.… (more)

Subjects/Keywords: Krokový motor; motor; model; řízení krokového motoru; Stepper motor; motor; model; controlling stepper motor

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Macek, D. (2019). Modelování a řízení krokového motoru v prostředí MATLAB/Simulink: Modeling and control of stepper motor in MATLAB/Simulink. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/67005

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Macek, Daniel. “Modelování a řízení krokového motoru v prostředí MATLAB/Simulink: Modeling and control of stepper motor in MATLAB/Simulink.” 2019. Thesis, Brno University of Technology. Accessed January 16, 2021. http://hdl.handle.net/11012/67005.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Macek, Daniel. “Modelování a řízení krokového motoru v prostředí MATLAB/Simulink: Modeling and control of stepper motor in MATLAB/Simulink.” 2019. Web. 16 Jan 2021.

Vancouver:

Macek D. Modelování a řízení krokového motoru v prostředí MATLAB/Simulink: Modeling and control of stepper motor in MATLAB/Simulink. [Internet] [Thesis]. Brno University of Technology; 2019. [cited 2021 Jan 16]. Available from: http://hdl.handle.net/11012/67005.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Macek D. Modelování a řízení krokového motoru v prostředí MATLAB/Simulink: Modeling and control of stepper motor in MATLAB/Simulink. [Thesis]. Brno University of Technology; 2019. Available from: http://hdl.handle.net/11012/67005

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

University of Akron

7. Islam, Md. Zakirul. Design and Performance Analysis of Rare-Earth-Free Five-Phase Permanent Magnet-Assisted Synchronous Reluctance Motor.

Degree: PhD, Electrical Engineering, 2019, University of Akron

URL: http://rave.ohiolink.edu/etdc/view?acc_num=akron1574423146588421

► This dissertation presents the design and performance analysis of five-phase ferrite permanent magnet assisted synchronous reluctance motor (Fe-PMaSynRM). The risk of irreversible demagnetization and mechanical… (more)

Subjects/Keywords: Electromagnetics; Electrical Engineering; Electric Motor, Five-Phase, Design Optimization, Demagnetization, Synchronous Reluctance Motor, Permanent Magnet Synchronous Motor, PMaSynRM, SynRM

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Islam, M. Z. (2019). Design and Performance Analysis of Rare-Earth-Free Five-Phase Permanent Magnet-Assisted Synchronous Reluctance Motor. (Doctoral Dissertation). University of Akron. Retrieved from http://rave.ohiolink.edu/etdc/view?acc_num=akron1574423146588421

Chicago Manual of Style (16^th Edition):

Islam, Md Zakirul. “Design and Performance Analysis of Rare-Earth-Free Five-Phase Permanent Magnet-Assisted Synchronous Reluctance Motor.” 2019. Doctoral Dissertation, University of Akron. Accessed January 16, 2021. http://rave.ohiolink.edu/etdc/view?acc_num=akron1574423146588421.

MLA Handbook (7^th Edition):

Islam, Md Zakirul. “Design and Performance Analysis of Rare-Earth-Free Five-Phase Permanent Magnet-Assisted Synchronous Reluctance Motor.” 2019. Web. 16 Jan 2021.

Vancouver:

Islam MZ. Design and Performance Analysis of Rare-Earth-Free Five-Phase Permanent Magnet-Assisted Synchronous Reluctance Motor. [Internet] [Doctoral dissertation]. University of Akron; 2019. [cited 2021 Jan 16]. Available from: http://rave.ohiolink.edu/etdc/view?acc_num=akron1574423146588421.

Council of Science Editors:

Islam MZ. Design and Performance Analysis of Rare-Earth-Free Five-Phase Permanent Magnet-Assisted Synchronous Reluctance Motor. [Doctoral Dissertation]. University of Akron; 2019. Available from: http://rave.ohiolink.edu/etdc/view?acc_num=akron1574423146588421

Texas A&M University

8. Meenakshi Sundaram, Vivek. Reliable Multiphase Induction Motor Drives.

Degree: PhD, Electrical Engineering, 2016, Texas A&M University

URL: http://hdl.handle.net/1969.1/158921

► A motor is said to be reliable if it can run at its rated operating condition for a specified period of time. With the widespread… (more)

Subjects/Keywords: induction motor; inter-turn fault; fractional slot concentrated winding; five phase motor; dc injection; dsp based control

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Meenakshi Sundaram, V. (2016). Reliable Multiphase Induction Motor Drives. (Doctoral Dissertation). Texas A&M University. Retrieved from http://hdl.handle.net/1969.1/158921

Chicago Manual of Style (16^th Edition):

Meenakshi Sundaram, Vivek. “Reliable Multiphase Induction Motor Drives.” 2016. Doctoral Dissertation, Texas A&M University. Accessed January 16, 2021. http://hdl.handle.net/1969.1/158921.

MLA Handbook (7^th Edition):

Meenakshi Sundaram, Vivek. “Reliable Multiphase Induction Motor Drives.” 2016. Web. 16 Jan 2021.

Vancouver:

Meenakshi Sundaram V. Reliable Multiphase Induction Motor Drives. [Internet] [Doctoral dissertation]. Texas A&M University; 2016. [cited 2021 Jan 16]. Available from: http://hdl.handle.net/1969.1/158921.

Council of Science Editors:

Meenakshi Sundaram V. Reliable Multiphase Induction Motor Drives. [Doctoral Dissertation]. Texas A&M University; 2016. Available from: http://hdl.handle.net/1969.1/158921

Brno University of Technology

9. Škoda, Josef. Pětifázový asynchronní motor: Five-phase induction machine.

Degree: 2020, Brno University of Technology

URL: http://hdl.handle.net/11012/189286

► This thesis deals with the design of a five-phase machine. In the first part of this thesis are presented theoretical knowledge about five-phase machines. In… (more)

Subjects/Keywords: Asynchronní motor; pětifázový asynchronní motor; vícefázové stroje; elektromagnetický návrh.; Induction machine; five-phase induction machine; multiphase machines; electromagnetic design.

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Škoda, J. (2020). Pětifázový asynchronní motor: Five-phase induction machine. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/189286

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Škoda, Josef. “Pětifázový asynchronní motor: Five-phase induction machine.” 2020. Thesis, Brno University of Technology. Accessed January 16, 2021. http://hdl.handle.net/11012/189286.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Škoda, Josef. “Pětifázový asynchronní motor: Five-phase induction machine.” 2020. Web. 16 Jan 2021.

Vancouver:

Škoda J. Pětifázový asynchronní motor: Five-phase induction machine. [Internet] [Thesis]. Brno University of Technology; 2020. [cited 2021 Jan 16]. Available from: http://hdl.handle.net/11012/189286.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Škoda J. Pětifázový asynchronní motor: Five-phase induction machine. [Thesis]. Brno University of Technology; 2020. Available from: http://hdl.handle.net/11012/189286

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Delft University of Technology

10. Kooper, Martin (author). A new filter wheel architecture: Designing a rotating hybrid linear stepper motor for space-based optical systems.

Degree: 2019, Delft University of Technology

URL: http://resolver.tudelft.nl/uuid:ddaebd4d-4d63-4bf6-a898-6fb2a70fdf8b

►

This report presents a new filter wheel design for use in space-based optical systems. The design integrates a hybrid linear stepper motor into the wheel's… (more)

Subjects/Keywords: Hybrid linear stepper motor filter wheel

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Kooper, M. (. (2019). A new filter wheel architecture: Designing a rotating hybrid linear stepper motor for space-based optical systems. (Masters Thesis). Delft University of Technology. Retrieved from http://resolver.tudelft.nl/uuid:ddaebd4d-4d63-4bf6-a898-6fb2a70fdf8b

Chicago Manual of Style (16^th Edition):

Kooper, Martin (author). “A new filter wheel architecture: Designing a rotating hybrid linear stepper motor for space-based optical systems.” 2019. Masters Thesis, Delft University of Technology. Accessed January 16, 2021. http://resolver.tudelft.nl/uuid:ddaebd4d-4d63-4bf6-a898-6fb2a70fdf8b.

MLA Handbook (7^th Edition):

Kooper, Martin (author). “A new filter wheel architecture: Designing a rotating hybrid linear stepper motor for space-based optical systems.” 2019. Web. 16 Jan 2021.

Vancouver:

Kooper M(. A new filter wheel architecture: Designing a rotating hybrid linear stepper motor for space-based optical systems. [Internet] [Masters thesis]. Delft University of Technology; 2019. [cited 2021 Jan 16]. Available from: http://resolver.tudelft.nl/uuid:ddaebd4d-4d63-4bf6-a898-6fb2a70fdf8b.

Council of Science Editors:

Kooper M(. A new filter wheel architecture: Designing a rotating hybrid linear stepper motor for space-based optical systems. [Masters Thesis]. Delft University of Technology; 2019. Available from: http://resolver.tudelft.nl/uuid:ddaebd4d-4d63-4bf6-a898-6fb2a70fdf8b

Brno University of Technology

11. Mach, Martin. Zpětnovazební řízení krokového motorku: Stepper motor feedback control.

Degree: 2018, Brno University of Technology

URL: http://hdl.handle.net/11012/60433

► Goal of this thesis is to familiarize your-self with NCV70514 stepper motor driver by ON semiconductor, the function of bipolar stepper motor, hardware and software… (more)

Subjects/Keywords: Budič krokových motor; NCV70514; krokový motor; VisualBasic; Keil µVision; Stepper motor driver; NCV70514; stepper motor; VisualBasic; Keil µVision

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Mach, M. (2018). Zpětnovazební řízení krokového motorku: Stepper motor feedback control. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/60433

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Mach, Martin. “Zpětnovazební řízení krokového motorku: Stepper motor feedback control.” 2018. Thesis, Brno University of Technology. Accessed January 16, 2021. http://hdl.handle.net/11012/60433.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Mach, Martin. “Zpětnovazební řízení krokového motorku: Stepper motor feedback control.” 2018. Web. 16 Jan 2021.

Vancouver:

Mach M. Zpětnovazební řízení krokového motorku: Stepper motor feedback control. [Internet] [Thesis]. Brno University of Technology; 2018. [cited 2021 Jan 16]. Available from: http://hdl.handle.net/11012/60433.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Mach M. Zpětnovazební řízení krokového motorku: Stepper motor feedback control. [Thesis]. Brno University of Technology; 2018. Available from: http://hdl.handle.net/11012/60433

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Universidade do Rio Grande do Sul

12. Benvenuti, Renê Augusto. Plataforma para simulação e implementação de técnicas de controle de máquinas de indução trifásicas e pentafásicas.

Degree: 2014, Universidade do Rio Grande do Sul

URL: http://hdl.handle.net/10183/130180

►

Apresenta-se neste trabalho uma plataforma de simulação, acionamento e controle de máquinas de indução trifásicas e pentafásicas, baseada na integração entre ambientes de simulação e… (more)

▼

Apresenta-se neste trabalho uma plataforma de simulação, acionamento e controle de máquinas de indução trifásicas e pentafásicas, baseada na integração entre ambientes de simulação e de prototipação em tempo real. Esta plataforma é composta por ferramentas de software desenvolvidas para MATLAB/Simulink R que interagem com a plataforma de hardware dSPACE R DS1104, permitindo gerar aplicações diretamente do ambiente de simulação para acionamento da plataforma física de máquinas de maneira rápida e transparente para o usuário. Inicialmente é abordada a teoria que envolve o acionamento e o controle de máquinas de indução. Descrevem-se os modelos da máquina de indução trifásica e da máquina de indução pentafásica, o segundo incluindo efeitos de terceiro harmônico do campo do entreferro. Também são abordados os modelos de inversores de frequência e as técnicas, escalar V=f e vetorial por orientação indireta e direta de campo, de controle de máquinas de indução. Depois disso, são descritas as ferramentas de software desenvolvidas e também a plataforma de hardware utilizada. As ferramentas de simulação implementadas são validadas para permitir a reprodução da dinâmica das máquinas de indução, dos blocos sensores de corrente, velocidade e torque e do acionamento de potência. Além disso, são desenvolvidas ferramentas de controle que implementam as técnicas de controle V=f e orientação de campo, também incluindo blocos que implementam estimadores de fluxo, transformação de coordenadas e de referencial, entre outros. A integração entre o ambiente de simulação e a prototipação do algoritmo de controle é obtida por meio do uso do framework da plataforma dSPACE DS1104 e da implementação de ferramentas de tempo real que servem de link entre ambiente de simulação e de prototipação. Do ponto de vista do usuário da biblioteca proposta, a transição entre ambiente de simulação e de prototipação é realizada pela substituição de blocos de modelos por blocos de tempo real. O algoritmo de controle pode ser simulado em ambiente Simulink e diretamente compilado a partir deste para a plataforma dSPACE DS1104, onde será executado em tempo real. São criados experimentos que demonstram a aplicabilidade da plataforma proposta por meio da implementação em simulação e também em tempo real de controladores de velocidade para a máquina de indução trifásica e para a máquina de indução pentafásica. Utilizam-se as técnicas de controle escalar V=f e controle vetorial por orientação direta e indireta de campo.

In this work is presented a platform for simulation and prototyping of control techniques for 3-phase and 5-phase induction machines. It is developed a toolbox library in MATLAB/Simulink R to be used with dSPACE R DS1104 platform. The software tools and the hardware platform are both described and provide an integrated environment which allows the user to develop and evaluate control techniques for induction machines by means of pure simulation as well as executing them on an underlying hardware platform connected to the machine. The transition…

Advisors/Committee Members: Pereira, Luís Fernando Alves.

Subjects/Keywords: Induction machine control; Motor de indução; Five-phase induction machine; Máquinas elétricas; Prototipação; System simulation; Simulação computacional; Prototyping

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Benvenuti, R. A. (2014). Plataforma para simulação e implementação de técnicas de controle de máquinas de indução trifásicas e pentafásicas. (Thesis). Universidade do Rio Grande do Sul. Retrieved from http://hdl.handle.net/10183/130180

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Benvenuti, Renê Augusto. “Plataforma para simulação e implementação de técnicas de controle de máquinas de indução trifásicas e pentafásicas.” 2014. Thesis, Universidade do Rio Grande do Sul. Accessed January 16, 2021. http://hdl.handle.net/10183/130180.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Benvenuti, Renê Augusto. “Plataforma para simulação e implementação de técnicas de controle de máquinas de indução trifásicas e pentafásicas.” 2014. Web. 16 Jan 2021.

Vancouver:

Benvenuti RA. Plataforma para simulação e implementação de técnicas de controle de máquinas de indução trifásicas e pentafásicas. [Internet] [Thesis]. Universidade do Rio Grande do Sul; 2014. [cited 2021 Jan 16]. Available from: http://hdl.handle.net/10183/130180.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Benvenuti RA. Plataforma para simulação e implementação de técnicas de controle de máquinas de indução trifásicas e pentafásicas. [Thesis]. Universidade do Rio Grande do Sul; 2014. Available from: http://hdl.handle.net/10183/130180

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Universidade do Rio Grande do Sul

13. Dias, Tiago Fouchy. Otimização multiobjetivo de uma máquina pentafásica utilizando NSGA-II.

Degree: 2016, Universidade do Rio Grande do Sul

URL: http://hdl.handle.net/10183/156471

►

Neste trabalho é desenvolvida uma metodologia de otimização multiobjetivo baseada no NSGA-II (Nondominated Sorting Genetic Algorithm), a qual visa a otimização do projeto de máquinas… (more)

▼

Neste trabalho é desenvolvida uma metodologia de otimização multiobjetivo baseada no NSGA-II (Nondominated Sorting Genetic Algorithm), a qual visa a otimização do projeto de máquinas de indução pentafásicas. A escolha deste tipo de máquina se justifica pelo fato de que elas apresentam vantagens importantes quando comparadas com as trifásicas convencionais, tais como maior potência e maior torque para um mesmo volume de material ativo, além da possibilidade de operar na ocorrência de falhas (perda de uma ou duas fases). Na otimização de máquinas de indução vários objetivos podem ser definidos, sendo estes muitas vezes conflitantes. Neste contexto, este trabalho visa obter soluções que representam um compromisso entre dois objetivos: rendimento e custo do material ativo (ferro e material condutor). O algoritmo de otimização desenvolvido e implementado utiliza dois controles de diversidade da população, um baseado no fenótipo dos indivíduos, que é característico do NSGA-II, e outro adicional que é baseado no genótipo. A geometria do estator e do rotor da máquina e o seu modo de acionamento são parametrizados por 14 variáveis inteiras. O método desenvolvido foi implementado no Matlab R e aplicado a um caso prático de otimização de uma máquina de indução pentafásica considerando os dois objetivos citados. Os resultados práticos mostram que o método é capaz de obter projetos otimizados com maior rendimento e menor custo aproveitando as características particulares deste tipo de máquina.

In this work, it is developed a method of multiobjective optimization based on NSGAII (Nondominated Sorting Genetic Algorithm), which aims at optimizing the design of five-phase induction machines. The choice of this particular type of machine is justified by the fact that they have important advantages over conventional three-phase machines, such as higher power and higher torque for the same volume of material; in addition, they can operate under fault (loss of one or even two phases). When optimizing induction machines, several objectives can be defined, which are often conflicting. In this context, this work aims to obtain solutions that represent a trade-off between two objectives: efficiency and cost of active material (iron and conductor materials). The optimization algorithm that was developed and implemented uses two types of control for the diversity of the population, one based on the phenotype of the individuals, characteristic of the NSGA-II, and another one based on the genotype. The geometrical dimensions of the stator and rotor, together with the driving strategy, are parameterized by 14 integer variables. The developed method was implemented using Matlab R and applied to a practical case of a five-phase induction machine considering the aforementioned objectives. The practical results show that the method can lead to an optimized design with higher efficiency and at a lower cost, accounting for the special characteristics of this type of machine.

Advisors/Committee Members: Haffner, Sérgio Luís.

Subjects/Keywords: Optimization of induction machine; Otimização matemática; Five-phase induction machine; Algoritmo genético; Motor de indução; Multiobjective optimization; NSGA-II

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Dias, T. F. (2016). Otimização multiobjetivo de uma máquina pentafásica utilizando NSGA-II. (Thesis). Universidade do Rio Grande do Sul. Retrieved from http://hdl.handle.net/10183/156471

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Dias, Tiago Fouchy. “Otimização multiobjetivo de uma máquina pentafásica utilizando NSGA-II.” 2016. Thesis, Universidade do Rio Grande do Sul. Accessed January 16, 2021. http://hdl.handle.net/10183/156471.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Dias, Tiago Fouchy. “Otimização multiobjetivo de uma máquina pentafásica utilizando NSGA-II.” 2016. Web. 16 Jan 2021.

Vancouver:

Dias TF. Otimização multiobjetivo de uma máquina pentafásica utilizando NSGA-II. [Internet] [Thesis]. Universidade do Rio Grande do Sul; 2016. [cited 2021 Jan 16]. Available from: http://hdl.handle.net/10183/156471.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Dias TF. Otimização multiobjetivo de uma máquina pentafásica utilizando NSGA-II. [Thesis]. Universidade do Rio Grande do Sul; 2016. Available from: http://hdl.handle.net/10183/156471

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

14. Struhelka, Michal. Ovládání motorů po sběrnici: Bus control of motors.

Degree: 2019, Brno University of Technology

URL: http://hdl.handle.net/11012/10094

► This project deals with basic control of DC motors, servo and stepper motors using 8-bit Atmel microcontroller. The microcontroller is connected to the I2C bus… (more)

Subjects/Keywords: I2C; stejnosměrný motor; servo; krokový motor; mikrokontrolér; I2C; DC motor; servo; stepper motor; microcontroller

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Struhelka, M. (2019). Ovládání motorů po sběrnici: Bus control of motors. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/10094

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Struhelka, Michal. “Ovládání motorů po sběrnici: Bus control of motors.” 2019. Thesis, Brno University of Technology. Accessed January 16, 2021. http://hdl.handle.net/11012/10094.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Struhelka, Michal. “Ovládání motorů po sběrnici: Bus control of motors.” 2019. Web. 16 Jan 2021.

Vancouver:

Struhelka M. Ovládání motorů po sběrnici: Bus control of motors. [Internet] [Thesis]. Brno University of Technology; 2019. [cited 2021 Jan 16]. Available from: http://hdl.handle.net/11012/10094.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Struhelka M. Ovládání motorů po sběrnici: Bus control of motors. [Thesis]. Brno University of Technology; 2019. Available from: http://hdl.handle.net/11012/10094

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Vilnius Gediminas Technical University

15. Armonas, Simas. Geodezinių prietaisų pozicionavimo sistemos tyrimas.

Degree: Master, Electronics and Electrical Engineering, 2009, Vilnius Gediminas Technical University

URL: http://vddb.laba.lt/obj/LT-eLABa-0001:E.02~2009~D_20090708_141304-66230 ;

►

Baigiamajame magistro darbe nagrinėjama ir modernizuojama Geodezijos institute naudojamo įtaiso, skirto geodezijos prietaisams kalibruoti, žingsninė pavara. Stende naudojama pavara nebeatitinka reikalaujamo tikslumo, ir neišvysto reikiamo… (more)

▼

Baigiamajame magistro darbe nagrinėjama ir modernizuojama Geodezijos institute naudojamo įtaiso, skirto geodezijos prietaisams kalibruoti, žingsninė pavara. Stende naudojama pavara nebeatitinka reikalaujamo tikslumo, ir neišvysto reikiamo greičio. Darbo tikslas – modernizuoti pozicionavimo pavarą (padidinti jos greitį ir tikslumą). Teorinėje dalyje aptariamas geodezijos prietaisų kalibravimo stendo veikimo principas, naudojama kalibravimo metodika, atliekamas žingsninio variklio dinaminių charakteristikų skaičiavimas. Eksperimentinėje dalyje pateikiamos principinė ir funkcinė modernizuotos pavaros valdiklio schemos. Taip pat nagrinėjamas pavaros valdymo algoritmas, pateikiamos esminės mikrovaldiklio programos dalys. Čia atliekama pavaros darbo režimų analizė, nagrinėjama mikrožingsnio svarba pavaros greičiui bei tikslumui. Modernizuotoje pavaroje naudojami moderniausi žingsninių pavarų valdymo metodai, pavaros tikslumas padidėjo 30 kartų.

This postgraduate thesis is about analysis and modernization of positioning gear, used in geodesic equipment. Old gear used in the rig is very slow and not accurate. Mission of this work is to make gear faster and more accurate. The theoretical path consists of geodesic equipment calibration methods, principles of rig operation, analysis of stepper motor dynamic characteristics. Experimental path consists of: principal and function diagrams of stepper gear driver, program algorithms, and parameters investigation of all working modes of the gear. The most modern methods is used in renewed gear, the precision increased 30 times.

Advisors/Committee Members: Udris, Dainius (Master’s thesis supervisor), Radzevičius, Lionginas (Master’s thesis advisor), Kaulakienė, Angelė (Master’s thesis advisor), Savickienė, Zita (Master’s degree committee member), Radzevičius, Lionginas (Master’s thesis reviewer), Smilgevičius, Algirdas (Master’s thesis reviewer), Smilgevičius, Algirdas (Master’s degree committee member), Radzevičius, Lionginas (Master’s degree committee member), Udris, Dainius (Master’s degree committee member), Rinkevičienė, Roma (Master’s degree committee member), Navakauskas, Dalius (Master’s degree committee member), Rinkevičius, Vytautas (Master’s degree committee chair).

Subjects/Keywords: Žingsninė pavara; Mikrožingsnis; Valdiklis; Žingsninis variklis; Stepper gear; Microstep; Driver; Stepper motor

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Armonas, Simas. (2009). Geodezinių prietaisų pozicionavimo sistemos tyrimas. (Masters Thesis). Vilnius Gediminas Technical University. Retrieved from http://vddb.laba.lt/obj/LT-eLABa-0001:E.02~2009~D_20090708_141304-66230 ;

Note: this citation may be lacking information needed for this citation format:
Author name may be incomplete

Chicago Manual of Style (16^th Edition):

Armonas, Simas. “Geodezinių prietaisų pozicionavimo sistemos tyrimas.” 2009. Masters Thesis, Vilnius Gediminas Technical University. Accessed January 16, 2021. http://vddb.laba.lt/obj/LT-eLABa-0001:E.02~2009~D_20090708_141304-66230 ;.

Note: this citation may be lacking information needed for this citation format:
Author name may be incomplete

MLA Handbook (7^th Edition):

Armonas, Simas. “Geodezinių prietaisų pozicionavimo sistemos tyrimas.” 2009. Web. 16 Jan 2021.

Note: this citation may be lacking information needed for this citation format:
Author name may be incomplete

Vancouver:

Armonas, Simas. Geodezinių prietaisų pozicionavimo sistemos tyrimas. [Internet] [Masters thesis]. Vilnius Gediminas Technical University; 2009. [cited 2021 Jan 16]. Available from: http://vddb.laba.lt/obj/LT-eLABa-0001:E.02~2009~D_20090708_141304-66230 ;.

Note: this citation may be lacking information needed for this citation format:
Author name may be incomplete

Council of Science Editors:

Armonas, Simas. Geodezinių prietaisų pozicionavimo sistemos tyrimas. [Masters Thesis]. Vilnius Gediminas Technical University; 2009. Available from: http://vddb.laba.lt/obj/LT-eLABa-0001:E.02~2009~D_20090708_141304-66230 ;

Note: this citation may be lacking information needed for this citation format:
Author name may be incomplete

Brno University of Technology

16. Maralík, Marek. Ovladače k měniči pro krokové motory: Drivers for stepper motor driver.

Degree: 2019, Brno University of Technology

URL: http://hdl.handle.net/11012/67245

► The bachelor thesis deals with the problems of the drivers for the stepper motor controller. At the beginning of the thesis are described basic principles… (more)

Subjects/Keywords: Krokový motor; měnič Standa 8SMC1 – USBhF-B2; ovladače krokového motoru; LabVIEW; Stepper Motor; Standa 8SMC1 - USBhF-B2; Stepper Motor Controllers; LabVIEW

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Maralík, M. (2019). Ovladače k měniči pro krokové motory: Drivers for stepper motor driver. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/67245

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Maralík, Marek. “Ovladače k měniči pro krokové motory: Drivers for stepper motor driver.” 2019. Thesis, Brno University of Technology. Accessed January 16, 2021. http://hdl.handle.net/11012/67245.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Maralík, Marek. “Ovladače k měniči pro krokové motory: Drivers for stepper motor driver.” 2019. Web. 16 Jan 2021.

Vancouver:

Maralík M. Ovladače k měniči pro krokové motory: Drivers for stepper motor driver. [Internet] [Thesis]. Brno University of Technology; 2019. [cited 2021 Jan 16]. Available from: http://hdl.handle.net/11012/67245.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Maralík M. Ovladače k měniči pro krokové motory: Drivers for stepper motor driver. [Thesis]. Brno University of Technology; 2019. Available from: http://hdl.handle.net/11012/67245

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

17. Hájek, Josef. Řídicí jednotka krokového motoru založená na mikrokontroléru HC08: HC08-Based Controller of a Step Motor.

Degree: 2020, Brno University of Technology

URL: http://hdl.handle.net/11012/187920

► This bachelor's work deals with issue of stepper motors and their control using single-chip microcontrollers. Target of the work is to be familiar with method… (more)

Subjects/Keywords: Krokový motor; řízení; mikrokontrolér; Stepper motor; driving; microcontroller

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Hájek, J. (2020). Řídicí jednotka krokového motoru založená na mikrokontroléru HC08: HC08-Based Controller of a Step Motor. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/187920

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Hájek, Josef. “Řídicí jednotka krokového motoru založená na mikrokontroléru HC08: HC08-Based Controller of a Step Motor.” 2020. Thesis, Brno University of Technology. Accessed January 16, 2021. http://hdl.handle.net/11012/187920.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Hájek, Josef. “Řídicí jednotka krokového motoru založená na mikrokontroléru HC08: HC08-Based Controller of a Step Motor.” 2020. Web. 16 Jan 2021.

Vancouver:

Hájek J. Řídicí jednotka krokového motoru založená na mikrokontroléru HC08: HC08-Based Controller of a Step Motor. [Internet] [Thesis]. Brno University of Technology; 2020. [cited 2021 Jan 16]. Available from: http://hdl.handle.net/11012/187920.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Hájek J. Řídicí jednotka krokového motoru založená na mikrokontroléru HC08: HC08-Based Controller of a Step Motor. [Thesis]. Brno University of Technology; 2020. Available from: http://hdl.handle.net/11012/187920

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

18. Hájek, Josef. Řídicí jednotka krokového motoru založená na mikrokontroléru HC08: HC08-Based Controller of a Step Motor.

Degree: 2020, Brno University of Technology

URL: http://hdl.handle.net/11012/56305

► This bachelor's work deals with issue of stepper motors and their control using single-chip microcontrollers. Target of the work is to be familiar with method… (more)

Subjects/Keywords: Krokový motor; řízení; mikrokontrolér; Stepper motor; driving; microcontroller

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Hájek, J. (2020). Řídicí jednotka krokového motoru založená na mikrokontroléru HC08: HC08-Based Controller of a Step Motor. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/56305

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Hájek, Josef. “Řídicí jednotka krokového motoru založená na mikrokontroléru HC08: HC08-Based Controller of a Step Motor.” 2020. Thesis, Brno University of Technology. Accessed January 16, 2021. http://hdl.handle.net/11012/56305.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Hájek, Josef. “Řídicí jednotka krokového motoru založená na mikrokontroléru HC08: HC08-Based Controller of a Step Motor.” 2020. Web. 16 Jan 2021.

Vancouver:

Hájek J. Řídicí jednotka krokového motoru založená na mikrokontroléru HC08: HC08-Based Controller of a Step Motor. [Internet] [Thesis]. Brno University of Technology; 2020. [cited 2021 Jan 16]. Available from: http://hdl.handle.net/11012/56305.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Hájek J. Řídicí jednotka krokového motoru založená na mikrokontroléru HC08: HC08-Based Controller of a Step Motor. [Thesis]. Brno University of Technology; 2020. Available from: http://hdl.handle.net/11012/56305

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

19. Krejčí, Ondřej. Realizace malého měniče pro krokové motory řízeného mikropočítačem: Realization of small microprocessor controlled converter for stepper motors.

Degree: 2019, Brno University of Technology

URL: http://hdl.handle.net/11012/94

► This bachelor’s thesis the use of stepper motors. The following text provides an overview of different types of stepper motors and explains how these motors… (more)

Subjects/Keywords: Krokový motor; řízení; mikroprocesor MC56F8025; Stepper motor; control; microprocessor MC56F8025

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Krejčí, O. (2019). Realizace malého měniče pro krokové motory řízeného mikropočítačem: Realization of small microprocessor controlled converter for stepper motors. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/94

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Krejčí, Ondřej. “Realizace malého měniče pro krokové motory řízeného mikropočítačem: Realization of small microprocessor controlled converter for stepper motors.” 2019. Thesis, Brno University of Technology. Accessed January 16, 2021. http://hdl.handle.net/11012/94.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Krejčí, Ondřej. “Realizace malého měniče pro krokové motory řízeného mikropočítačem: Realization of small microprocessor controlled converter for stepper motors.” 2019. Web. 16 Jan 2021.

Vancouver:

Krejčí O. Realizace malého měniče pro krokové motory řízeného mikropočítačem: Realization of small microprocessor controlled converter for stepper motors. [Internet] [Thesis]. Brno University of Technology; 2019. [cited 2021 Jan 16]. Available from: http://hdl.handle.net/11012/94.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Krejčí O. Realizace malého měniče pro krokové motory řízeného mikropočítačem: Realization of small microprocessor controlled converter for stepper motors. [Thesis]. Brno University of Technology; 2019. Available from: http://hdl.handle.net/11012/94

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

20. Dvořáček, Petr. Řízení krokových motorů programovatelným automatem: Stepper motors control by programmable logic controller.

Degree: 2019, Brno University of Technology

URL: http://hdl.handle.net/11012/5462

► This bachelor thesis deals with programmable logic controller and stepper motors. The target of the work is acquaint with them and to design and produce… (more)

Subjects/Keywords: PLC; řízení; krokový motor; PLC; control; stepper motor

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Dvořáček, P. (2019). Řízení krokových motorů programovatelným automatem: Stepper motors control by programmable logic controller. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/5462

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Dvořáček, Petr. “Řízení krokových motorů programovatelným automatem: Stepper motors control by programmable logic controller.” 2019. Thesis, Brno University of Technology. Accessed January 16, 2021. http://hdl.handle.net/11012/5462.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Dvořáček, Petr. “Řízení krokových motorů programovatelným automatem: Stepper motors control by programmable logic controller.” 2019. Web. 16 Jan 2021.

Vancouver:

Dvořáček P. Řízení krokových motorů programovatelným automatem: Stepper motors control by programmable logic controller. [Internet] [Thesis]. Brno University of Technology; 2019. [cited 2021 Jan 16]. Available from: http://hdl.handle.net/11012/5462.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Dvořáček P. Řízení krokových motorů programovatelným automatem: Stepper motors control by programmable logic controller. [Thesis]. Brno University of Technology; 2019. Available from: http://hdl.handle.net/11012/5462

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

21. Čejka, Štěpán. FITkit jako řídicí jednotka krokového motoru: FITkit as Step Motor Controller.

Degree: 2018, Brno University of Technology

URL: http://hdl.handle.net/11012/55816

► This work deals with problems related to design and implementation of a stepper motor controller based on the MSP430F2617 microcontroller and the Spartan3 field-programmable gate… (more)

Subjects/Keywords: Krokový motor; FITkit; řízení; mikrokontrolér; FPGA; VHDL; Stepper motor; FITkit; control; microcontroller; FPGA; VHDL

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Čejka, �. (2018). FITkit jako řídicí jednotka krokového motoru: FITkit as Step Motor Controller. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/55816

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Čejka, Štěpán. “FITkit jako řídicí jednotka krokového motoru: FITkit as Step Motor Controller.” 2018. Thesis, Brno University of Technology. Accessed January 16, 2021. http://hdl.handle.net/11012/55816.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Čejka, Štěpán. “FITkit jako řídicí jednotka krokového motoru: FITkit as Step Motor Controller.” 2018. Web. 16 Jan 2021.

Vancouver:

Čejka �. FITkit jako řídicí jednotka krokového motoru: FITkit as Step Motor Controller. [Internet] [Thesis]. Brno University of Technology; 2018. [cited 2021 Jan 16]. Available from: http://hdl.handle.net/11012/55816.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Čejka �. FITkit jako řídicí jednotka krokového motoru: FITkit as Step Motor Controller. [Thesis]. Brno University of Technology; 2018. Available from: http://hdl.handle.net/11012/55816

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

22. Hanulík, René. Řízení CNC pískovačky: CNC milling machine control.

Degree: 2020, Brno University of Technology

URL: http://hdl.handle.net/11012/189252

► The diploma thesis clarifies the issue of creating inscriptions on stone slabs. It describes some types of sensors, actuators, their physical principles and possibilities of… (more)

Subjects/Keywords: CNC; krokový motor; HPGL; pískování; ESP32; CNC; stepper motor; HPGL; sandblasting; ESP32

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Hanulík, R. (2020). Řízení CNC pískovačky: CNC milling machine control. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/189252

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Hanulík, René. “Řízení CNC pískovačky: CNC milling machine control.” 2020. Thesis, Brno University of Technology. Accessed January 16, 2021. http://hdl.handle.net/11012/189252.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Hanulík, René. “Řízení CNC pískovačky: CNC milling machine control.” 2020. Web. 16 Jan 2021.

Vancouver:

Hanulík R. Řízení CNC pískovačky: CNC milling machine control. [Internet] [Thesis]. Brno University of Technology; 2020. [cited 2021 Jan 16]. Available from: http://hdl.handle.net/11012/189252.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Hanulík R. Řízení CNC pískovačky: CNC milling machine control. [Thesis]. Brno University of Technology; 2020. Available from: http://hdl.handle.net/11012/189252

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

23. Škubal, Karel. Návrh malého rotačního stolu: Small Rotarz Turntable's Design.

Degree: 2020, Brno University of Technology

URL: http://hdl.handle.net/11012/191988

► The aim of this bachelor's thesis is the design, its implementation, and subsequent commissioning of a rotary table. The main goal is to produce a… (more)

Subjects/Keywords: Rotační stůl; Arduino; Krokový motor; Microstepping; Rotary table; Arduino; Stepper motor; Microstepping

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Škubal, K. (2020). Návrh malého rotačního stolu: Small Rotarz Turntable's Design. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/191988

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Škubal, Karel. “Návrh malého rotačního stolu: Small Rotarz Turntable's Design.” 2020. Thesis, Brno University of Technology. Accessed January 16, 2021. http://hdl.handle.net/11012/191988.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Škubal, Karel. “Návrh malého rotačního stolu: Small Rotarz Turntable's Design.” 2020. Web. 16 Jan 2021.

Vancouver:

Škubal K. Návrh malého rotačního stolu: Small Rotarz Turntable's Design. [Internet] [Thesis]. Brno University of Technology; 2020. [cited 2021 Jan 16]. Available from: http://hdl.handle.net/11012/191988.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Škubal K. Návrh malého rotačního stolu: Small Rotarz Turntable's Design. [Thesis]. Brno University of Technology; 2020. Available from: http://hdl.handle.net/11012/191988

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

24. Marko, Juraj. Návrh a realizace prototypu jednoduchého pohyblivého robota: Design and Realization of a Prototype of a Simple Mobile Robot.

Degree: 2019, Brno University of Technology

URL: http://hdl.handle.net/11012/55576

► This bachelor's thesis describes designation and implementation of simple mobile robot. The first part is focused on theoretic knowledge needed for construction of… (more)

Subjects/Keywords: robot; krokový motor; servo pohon; automatizovaný podvozok; robot; stepper motor; servo drive; automated support frame

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Marko, J. (2019). Návrh a realizace prototypu jednoduchého pohyblivého robota: Design and Realization of a Prototype of a Simple Mobile Robot. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/55576

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Marko, Juraj. “Návrh a realizace prototypu jednoduchého pohyblivého robota: Design and Realization of a Prototype of a Simple Mobile Robot.” 2019. Thesis, Brno University of Technology. Accessed January 16, 2021. http://hdl.handle.net/11012/55576.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Marko, Juraj. “Návrh a realizace prototypu jednoduchého pohyblivého robota: Design and Realization of a Prototype of a Simple Mobile Robot.” 2019. Web. 16 Jan 2021.

Vancouver:

Marko J. Návrh a realizace prototypu jednoduchého pohyblivého robota: Design and Realization of a Prototype of a Simple Mobile Robot. [Internet] [Thesis]. Brno University of Technology; 2019. [cited 2021 Jan 16]. Available from: http://hdl.handle.net/11012/55576.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Marko J. Návrh a realizace prototypu jednoduchého pohyblivého robota: Design and Realization of a Prototype of a Simple Mobile Robot. [Thesis]. Brno University of Technology; 2019. Available from: http://hdl.handle.net/11012/55576

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

25. Brada, Michal. Návrh pohonu natáčení monitorovací paraboly: Motion drive recording of monitoring dishes.

Degree: 2019, Brno University of Technology

URL: http://hdl.handle.net/11012/14790

► This bachelor’s thesis deals with construction of drive unit for setup accurate azimuth and elevation of weather radar. This thesis is consist of several parts.… (more)

Subjects/Keywords: Meteorologický radar; pohonná jednotka; krokový motor; Weather radar; drive unit; stepper motor

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Brada, M. (2019). Návrh pohonu natáčení monitorovací paraboly: Motion drive recording of monitoring dishes. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/14790

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Brada, Michal. “Návrh pohonu natáčení monitorovací paraboly: Motion drive recording of monitoring dishes.” 2019. Thesis, Brno University of Technology. Accessed January 16, 2021. http://hdl.handle.net/11012/14790.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Brada, Michal. “Návrh pohonu natáčení monitorovací paraboly: Motion drive recording of monitoring dishes.” 2019. Web. 16 Jan 2021.

Vancouver:

Brada M. Návrh pohonu natáčení monitorovací paraboly: Motion drive recording of monitoring dishes. [Internet] [Thesis]. Brno University of Technology; 2019. [cited 2021 Jan 16]. Available from: http://hdl.handle.net/11012/14790.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Brada M. Návrh pohonu natáčení monitorovací paraboly: Motion drive recording of monitoring dishes. [Thesis]. Brno University of Technology; 2019. Available from: http://hdl.handle.net/11012/14790

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

26. Dostál, Jan. Konstrukce vidlicové azimutální montáže astronomického dalekohledu: Construction of Azimuth Fork Mount.

Degree: 2019, Brno University of Technology

URL: http://hdl.handle.net/11012/15911

► Purpose of this master´s thesis is the construction proposal of azimuth fork mount with load capacity to 20kg including both axes drives. The solution contains… (more)

Subjects/Keywords: Azimutální vidlicová montáž dalekohledu; krokový motor; šnekové ozubení; Azimuth fork mount; stepper motor; worm gear

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Dostál, J. (2019). Konstrukce vidlicové azimutální montáže astronomického dalekohledu: Construction of Azimuth Fork Mount. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/15911

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Dostál, Jan. “Konstrukce vidlicové azimutální montáže astronomického dalekohledu: Construction of Azimuth Fork Mount.” 2019. Thesis, Brno University of Technology. Accessed January 16, 2021. http://hdl.handle.net/11012/15911.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Dostál, Jan. “Konstrukce vidlicové azimutální montáže astronomického dalekohledu: Construction of Azimuth Fork Mount.” 2019. Web. 16 Jan 2021.

Vancouver:

Dostál J. Konstrukce vidlicové azimutální montáže astronomického dalekohledu: Construction of Azimuth Fork Mount. [Internet] [Thesis]. Brno University of Technology; 2019. [cited 2021 Jan 16]. Available from: http://hdl.handle.net/11012/15911.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Dostál J. Konstrukce vidlicové azimutální montáže astronomického dalekohledu: Construction of Azimuth Fork Mount. [Thesis]. Brno University of Technology; 2019. Available from: http://hdl.handle.net/11012/15911

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

27. Knapil, Josef. Konstrukce a výroba CNC frézky pro modelářské účely: Type of construction and making of CNC milling machine because of pattern making.

Degree: 2019, Brno University of Technology

URL: http://hdl.handle.net/11012/20223

► Bachelor thesis describes the design and realization of model CNC milling machine. The first section describes the options for construction solution of small CNC machines.… (more)

Subjects/Keywords: CNC; frézka; krokový motor; lineární vedení; Mach3; CNC; milling machine; stepper motor; linear guides; Mach3

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Knapil, J. (2019). Konstrukce a výroba CNC frézky pro modelářské účely: Type of construction and making of CNC milling machine because of pattern making. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/20223

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Knapil, Josef. “Konstrukce a výroba CNC frézky pro modelářské účely: Type of construction and making of CNC milling machine because of pattern making.” 2019. Thesis, Brno University of Technology. Accessed January 16, 2021. http://hdl.handle.net/11012/20223.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Knapil, Josef. “Konstrukce a výroba CNC frézky pro modelářské účely: Type of construction and making of CNC milling machine because of pattern making.” 2019. Web. 16 Jan 2021.

Vancouver:

Knapil J. Konstrukce a výroba CNC frézky pro modelářské účely: Type of construction and making of CNC milling machine because of pattern making. [Internet] [Thesis]. Brno University of Technology; 2019. [cited 2021 Jan 16]. Available from: http://hdl.handle.net/11012/20223.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Knapil J. Konstrukce a výroba CNC frézky pro modelářské účely: Type of construction and making of CNC milling machine because of pattern making. [Thesis]. Brno University of Technology; 2019. Available from: http://hdl.handle.net/11012/20223

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

28. Tesař, Jan. Univerzální rotátor pro ornitologická pozorování: Universal rotator for ornithological observing.

Degree: 2019, Brno University of Technology

URL: http://hdl.handle.net/11012/6668

Thesis deals with design of device for ornithological observing. Device operates tilting, turning and playback voice of animal and is handled via wireless modules. Voltage supply is from battery. Weight of animal doesn't exceed 2 kg. Advisors/Committee Members: Růžek, Václav (advisor), Dřínovský, Jiří (referee).

Subjects/Keywords: Krokový motor; rotátor; mikrokontrolér; dálkové ovládání; Stepper motor; rotator; microcontroller; remote control

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Tesař, J. (2019). Univerzální rotátor pro ornitologická pozorování: Universal rotator for ornithological observing. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/6668

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Tesař, Jan. “Univerzální rotátor pro ornitologická pozorování: Universal rotator for ornithological observing.” 2019. Thesis, Brno University of Technology. Accessed January 16, 2021. http://hdl.handle.net/11012/6668.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Tesař, Jan. “Univerzální rotátor pro ornitologická pozorování: Universal rotator for ornithological observing.” 2019. Web. 16 Jan 2021.

Vancouver:

Tesař J. Univerzální rotátor pro ornitologická pozorování: Universal rotator for ornithological observing. [Internet] [Thesis]. Brno University of Technology; 2019. [cited 2021 Jan 16]. Available from: http://hdl.handle.net/11012/6668.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Tesař J. Univerzální rotátor pro ornitologická pozorování: Universal rotator for ornithological observing. [Thesis]. Brno University of Technology; 2019. Available from: http://hdl.handle.net/11012/6668

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

29. Fries, Lukáš. Řídicí jednotka pro řízení polohy experimentálního polohovacího stolku: Control unit for positioning control of the experimental positional table.

Degree: 2019, Brno University of Technology

URL: http://hdl.handle.net/11012/68115

► The work is devoted to the theoretical characteristics of the used components and its functioning. The main part is focused on practical design and build… (more)

Subjects/Keywords: Polohovací stoleček; krokový motor; ATmega328; řídicí jednotka; Positioning table; stepper motor; ATmega328; control unit

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Fries, L. (2019). Řídicí jednotka pro řízení polohy experimentálního polohovacího stolku: Control unit for positioning control of the experimental positional table. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/68115

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Fries, Lukáš. “Řídicí jednotka pro řízení polohy experimentálního polohovacího stolku: Control unit for positioning control of the experimental positional table.” 2019. Thesis, Brno University of Technology. Accessed January 16, 2021. http://hdl.handle.net/11012/68115.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Fries, Lukáš. “Řídicí jednotka pro řízení polohy experimentálního polohovacího stolku: Control unit for positioning control of the experimental positional table.” 2019. Web. 16 Jan 2021.

Vancouver:

Fries L. Řídicí jednotka pro řízení polohy experimentálního polohovacího stolku: Control unit for positioning control of the experimental positional table. [Internet] [Thesis]. Brno University of Technology; 2019. [cited 2021 Jan 16]. Available from: http://hdl.handle.net/11012/68115.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Fries L. Řídicí jednotka pro řízení polohy experimentálního polohovacího stolku: Control unit for positioning control of the experimental positional table. [Thesis]. Brno University of Technology; 2019. Available from: http://hdl.handle.net/11012/68115

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

30. Ihnát, Kryštof. Mikrokontrolérem řízená navíječka: Small Coil Winding Machine.

Degree: 2019, Brno University of Technology

URL: http://hdl.handle.net/11012/67654

► This work is about designing a small coil winding machine for the school workshop. The first part consists of market research, a comparison of winders,… (more)

Subjects/Keywords: Navíječka cívek; Arduino; krokový motor; cívka; driver; Coil winding machine; Arduino; stepper motor; coil; driver

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Ihnát, K. (2019). Mikrokontrolérem řízená navíječka: Small Coil Winding Machine. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/67654

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Ihnát, Kryštof. “Mikrokontrolérem řízená navíječka: Small Coil Winding Machine.” 2019. Thesis, Brno University of Technology. Accessed January 16, 2021. http://hdl.handle.net/11012/67654.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Ihnát, Kryštof. “Mikrokontrolérem řízená navíječka: Small Coil Winding Machine.” 2019. Web. 16 Jan 2021.

Vancouver:

Ihnát K. Mikrokontrolérem řízená navíječka: Small Coil Winding Machine. [Internet] [Thesis]. Brno University of Technology; 2019. [cited 2021 Jan 16]. Available from: http://hdl.handle.net/11012/67654.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Ihnát K. Mikrokontrolérem řízená navíječka: Small Coil Winding Machine. [Thesis]. Brno University of Technology; 2019. Available from: http://hdl.handle.net/11012/67654

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

		in
And / Or
		in
And / Or
		in
And / Or
		in

Open Access Theses and Dissertations