Advanced search options

Advanced Search Options 🞨

Browse by author name (“Author name starts with…”).

Find ETDs with:

in
/  
in
/  
in
/  
in

Written in Published in Earliest date Latest date

Sorted by

Results per page:

Sorted by: relevance · author · university · dateNew search

You searched for subject:(Engineering Metallurgy). Showing records 1 – 30 of 1547 total matches.

[1] [2] [3] [4] [5] … [52]

Search Limiters

Last 2 Years | English Only

Degrees

Levels

Languages

Country

▼ Search Limiters

1. Parga, Clemente Jose. Correlation between microstructures and oxidation resistance in Zr-Nb-Ti alloys.

Degree: 2010, The University of Texas at El Paso

  Oxidation behavior of Zr-10Nb-10Ti and Zr-10Nb-20Ti (compositions are in atomic percent) alloys has been investigated in air between 300 and 700°C. Higher Ti content… (more)

Subjects/Keywords: Engineering; Metallurgy

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Parga, C. J. (2010). Correlation between microstructures and oxidation resistance in Zr-Nb-Ti alloys. (Thesis). The University of Texas at El Paso. Retrieved from http://pqdtopen.proquest.com/#viewpdf?dispub=1473913

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16th Edition):

Parga, Clemente Jose. “Correlation between microstructures and oxidation resistance in Zr-Nb-Ti alloys.” 2010. Thesis, The University of Texas at El Paso. Accessed October 30, 2020. http://pqdtopen.proquest.com/#viewpdf?dispub=1473913.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7th Edition):

Parga, Clemente Jose. “Correlation between microstructures and oxidation resistance in Zr-Nb-Ti alloys.” 2010. Web. 30 Oct 2020.

Vancouver:

Parga CJ. Correlation between microstructures and oxidation resistance in Zr-Nb-Ti alloys. [Internet] [Thesis]. The University of Texas at El Paso; 2010. [cited 2020 Oct 30]. Available from: http://pqdtopen.proquest.com/#viewpdf?dispub=1473913.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Parga CJ. Correlation between microstructures and oxidation resistance in Zr-Nb-Ti alloys. [Thesis]. The University of Texas at El Paso; 2010. Available from: http://pqdtopen.proquest.com/#viewpdf?dispub=1473913

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation


McGill University

2. Rezaei Farkoosh, Amir. Development of creep-resistant Al-Si cast alloys strengthened with nanoscale dispersoids.

Degree: PhD, Department of Mining and Materials, 2015, McGill University

 This doctoral thesis aimed at creating thermally stable precipitates (dispersoids) via the use of slow-diffusing elements, Ni, Mo and Mn to develop creep resistant Al-Si… (more)

Subjects/Keywords: Engineering - Metallurgy

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Rezaei Farkoosh, A. (2015). Development of creep-resistant Al-Si cast alloys strengthened with nanoscale dispersoids. (Doctoral Dissertation). McGill University. Retrieved from https://escholarship.mcgill.ca/downloads/s4655k517.pdf ; https://escholarship.mcgill.ca/concern/theses/5h73q0106

Chicago Manual of Style (16th Edition):

Rezaei Farkoosh, Amir. “Development of creep-resistant Al-Si cast alloys strengthened with nanoscale dispersoids.” 2015. Doctoral Dissertation, McGill University. Accessed October 30, 2020. https://escholarship.mcgill.ca/downloads/s4655k517.pdf ; https://escholarship.mcgill.ca/concern/theses/5h73q0106.

MLA Handbook (7th Edition):

Rezaei Farkoosh, Amir. “Development of creep-resistant Al-Si cast alloys strengthened with nanoscale dispersoids.” 2015. Web. 30 Oct 2020.

Vancouver:

Rezaei Farkoosh A. Development of creep-resistant Al-Si cast alloys strengthened with nanoscale dispersoids. [Internet] [Doctoral dissertation]. McGill University; 2015. [cited 2020 Oct 30]. Available from: https://escholarship.mcgill.ca/downloads/s4655k517.pdf ; https://escholarship.mcgill.ca/concern/theses/5h73q0106.

Council of Science Editors:

Rezaei Farkoosh A. Development of creep-resistant Al-Si cast alloys strengthened with nanoscale dispersoids. [Doctoral Dissertation]. McGill University; 2015. Available from: https://escholarship.mcgill.ca/downloads/s4655k517.pdf ; https://escholarship.mcgill.ca/concern/theses/5h73q0106


McGill University

3. Multani, Ravinder. Removal of antimony from aqueous solutions as stable crystalline ferric antimonate (FeSbO4) – tripuhyite.

Degree: M. Eng., Department of Mining and Materials, 2015, McGill University

The scope of this research was to investigate the precipitation of antimony (Sb) from acidic aqueous solutions (6 g•L–1 Sb) as ferric antimonate, FeSbO4 (tripuhyite),… (more)

Subjects/Keywords: Engineering - Metallurgy

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Multani, R. (2015). Removal of antimony from aqueous solutions as stable crystalline ferric antimonate (FeSbO4) – tripuhyite. (Masters Thesis). McGill University. Retrieved from https://escholarship.mcgill.ca/downloads/6395wb40j.pdf ; https://escholarship.mcgill.ca/concern/theses/w0892d93s

Chicago Manual of Style (16th Edition):

Multani, Ravinder. “Removal of antimony from aqueous solutions as stable crystalline ferric antimonate (FeSbO4) – tripuhyite.” 2015. Masters Thesis, McGill University. Accessed October 30, 2020. https://escholarship.mcgill.ca/downloads/6395wb40j.pdf ; https://escholarship.mcgill.ca/concern/theses/w0892d93s.

MLA Handbook (7th Edition):

Multani, Ravinder. “Removal of antimony from aqueous solutions as stable crystalline ferric antimonate (FeSbO4) – tripuhyite.” 2015. Web. 30 Oct 2020.

Vancouver:

Multani R. Removal of antimony from aqueous solutions as stable crystalline ferric antimonate (FeSbO4) – tripuhyite. [Internet] [Masters thesis]. McGill University; 2015. [cited 2020 Oct 30]. Available from: https://escholarship.mcgill.ca/downloads/6395wb40j.pdf ; https://escholarship.mcgill.ca/concern/theses/w0892d93s.

Council of Science Editors:

Multani R. Removal of antimony from aqueous solutions as stable crystalline ferric antimonate (FeSbO4) – tripuhyite. [Masters Thesis]. McGill University; 2015. Available from: https://escholarship.mcgill.ca/downloads/6395wb40j.pdf ; https://escholarship.mcgill.ca/concern/theses/w0892d93s


McGill University

4. Deng, ZhouTong. Experimental investigation of particle flow in a spiral concentrator.

Degree: M. Eng., Department of Mining and Materials, 2015, McGill University

The spiral concentrator is a mineral processing device that separates mineral particles according to their densities and to a lesser extent particle size. In this… (more)

Subjects/Keywords: Engineering - Metallurgy

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Deng, Z. (2015). Experimental investigation of particle flow in a spiral concentrator. (Masters Thesis). McGill University. Retrieved from https://escholarship.mcgill.ca/downloads/jq085p19t.pdf ; https://escholarship.mcgill.ca/concern/theses/gm80hz547

Chicago Manual of Style (16th Edition):

Deng, ZhouTong. “Experimental investigation of particle flow in a spiral concentrator.” 2015. Masters Thesis, McGill University. Accessed October 30, 2020. https://escholarship.mcgill.ca/downloads/jq085p19t.pdf ; https://escholarship.mcgill.ca/concern/theses/gm80hz547.

MLA Handbook (7th Edition):

Deng, ZhouTong. “Experimental investigation of particle flow in a spiral concentrator.” 2015. Web. 30 Oct 2020.

Vancouver:

Deng Z. Experimental investigation of particle flow in a spiral concentrator. [Internet] [Masters thesis]. McGill University; 2015. [cited 2020 Oct 30]. Available from: https://escholarship.mcgill.ca/downloads/jq085p19t.pdf ; https://escholarship.mcgill.ca/concern/theses/gm80hz547.

Council of Science Editors:

Deng Z. Experimental investigation of particle flow in a spiral concentrator. [Masters Thesis]. McGill University; 2015. Available from: https://escholarship.mcgill.ca/downloads/jq085p19t.pdf ; https://escholarship.mcgill.ca/concern/theses/gm80hz547


McGill University

5. Nazari, Amir Mohammad. Heavy metal removal from dilute solutions using cysteine-rich protein-coated air bubbles.

Degree: PhD, Department of Mining and Materials, 2015, McGill University

 Ce projet de recherche jette un regard sur les possibilités de biosorption en laboratoire de systèmes unitaire (ions de cuivre) et tertiaires (ions de cuivre-nickel-cobalt… (more)

Subjects/Keywords: Engineering - Metallurgy

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Nazari, A. M. (2015). Heavy metal removal from dilute solutions using cysteine-rich protein-coated air bubbles. (Doctoral Dissertation). McGill University. Retrieved from https://escholarship.mcgill.ca/downloads/5999n638d.pdf ; https://escholarship.mcgill.ca/concern/theses/cz30pw76s

Chicago Manual of Style (16th Edition):

Nazari, Amir Mohammad. “Heavy metal removal from dilute solutions using cysteine-rich protein-coated air bubbles.” 2015. Doctoral Dissertation, McGill University. Accessed October 30, 2020. https://escholarship.mcgill.ca/downloads/5999n638d.pdf ; https://escholarship.mcgill.ca/concern/theses/cz30pw76s.

MLA Handbook (7th Edition):

Nazari, Amir Mohammad. “Heavy metal removal from dilute solutions using cysteine-rich protein-coated air bubbles.” 2015. Web. 30 Oct 2020.

Vancouver:

Nazari AM. Heavy metal removal from dilute solutions using cysteine-rich protein-coated air bubbles. [Internet] [Doctoral dissertation]. McGill University; 2015. [cited 2020 Oct 30]. Available from: https://escholarship.mcgill.ca/downloads/5999n638d.pdf ; https://escholarship.mcgill.ca/concern/theses/cz30pw76s.

Council of Science Editors:

Nazari AM. Heavy metal removal from dilute solutions using cysteine-rich protein-coated air bubbles. [Doctoral Dissertation]. McGill University; 2015. Available from: https://escholarship.mcgill.ca/downloads/5999n638d.pdf ; https://escholarship.mcgill.ca/concern/theses/cz30pw76s


McGill University

6. LeBoeuf, Jerome. Growing silicon thin–films laterally over amorphous substrates using the vapor–liquid–solid technique.

Degree: PhD, Department of Mining and Materials, 2015, McGill University

A new technique for growing two–dimensional, laterally grown silicon crystals has been developed. This research borrows from previously reported crystal growing techniques such as Bridgman–Stockbarger… (more)

Subjects/Keywords: Engineering - Metallurgy

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

LeBoeuf, J. (2015). Growing silicon thin–films laterally over amorphous substrates using the vapor–liquid–solid technique. (Doctoral Dissertation). McGill University. Retrieved from https://escholarship.mcgill.ca/downloads/ww72bf755.pdf ; https://escholarship.mcgill.ca/concern/theses/6108vf48j

Chicago Manual of Style (16th Edition):

LeBoeuf, Jerome. “Growing silicon thin–films laterally over amorphous substrates using the vapor–liquid–solid technique.” 2015. Doctoral Dissertation, McGill University. Accessed October 30, 2020. https://escholarship.mcgill.ca/downloads/ww72bf755.pdf ; https://escholarship.mcgill.ca/concern/theses/6108vf48j.

MLA Handbook (7th Edition):

LeBoeuf, Jerome. “Growing silicon thin–films laterally over amorphous substrates using the vapor–liquid–solid technique.” 2015. Web. 30 Oct 2020.

Vancouver:

LeBoeuf J. Growing silicon thin–films laterally over amorphous substrates using the vapor–liquid–solid technique. [Internet] [Doctoral dissertation]. McGill University; 2015. [cited 2020 Oct 30]. Available from: https://escholarship.mcgill.ca/downloads/ww72bf755.pdf ; https://escholarship.mcgill.ca/concern/theses/6108vf48j.

Council of Science Editors:

LeBoeuf J. Growing silicon thin–films laterally over amorphous substrates using the vapor–liquid–solid technique. [Doctoral Dissertation]. McGill University; 2015. Available from: https://escholarship.mcgill.ca/downloads/ww72bf755.pdf ; https://escholarship.mcgill.ca/concern/theses/6108vf48j


University of Oklahoma

7. Neskora, Daniel Ray. Copper and nickel production by continuous steady-state hydrogen reduction from aqueous ionic salt solutions.

Degree: PhD, 1973, University of Oklahoma

Subjects/Keywords: Engineering, Metallurgy.; Metallurgy.

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Neskora, D. R. (1973). Copper and nickel production by continuous steady-state hydrogen reduction from aqueous ionic salt solutions. (Doctoral Dissertation). University of Oklahoma. Retrieved from http://hdl.handle.net/11244/3591

Chicago Manual of Style (16th Edition):

Neskora, Daniel Ray. “Copper and nickel production by continuous steady-state hydrogen reduction from aqueous ionic salt solutions.” 1973. Doctoral Dissertation, University of Oklahoma. Accessed October 30, 2020. http://hdl.handle.net/11244/3591.

MLA Handbook (7th Edition):

Neskora, Daniel Ray. “Copper and nickel production by continuous steady-state hydrogen reduction from aqueous ionic salt solutions.” 1973. Web. 30 Oct 2020.

Vancouver:

Neskora DR. Copper and nickel production by continuous steady-state hydrogen reduction from aqueous ionic salt solutions. [Internet] [Doctoral dissertation]. University of Oklahoma; 1973. [cited 2020 Oct 30]. Available from: http://hdl.handle.net/11244/3591.

Council of Science Editors:

Neskora DR. Copper and nickel production by continuous steady-state hydrogen reduction from aqueous ionic salt solutions. [Doctoral Dissertation]. University of Oklahoma; 1973. Available from: http://hdl.handle.net/11244/3591

8. Lopez de Cardenas, Hugo Francisco Lopez. Selection process, modified impact testing and failure analysis of an electron-beam-melted Ti-6Al-4V 3D tessellation based on the Eulerian path of the first stellation of the rhombic dodecahedron open unit cell.

Degree: 2010, The University of Texas at El Paso

  Ti-6Al-4V lattice block structures manufactured through the electron beam melting (EBM) process are a promising field in design and research due to great advantages… (more)

Subjects/Keywords: Engineering, Metallurgy; Engineering, Materials Science

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Lopez de Cardenas, H. F. L. (2010). Selection process, modified impact testing and failure analysis of an electron-beam-melted Ti-6Al-4V 3D tessellation based on the Eulerian path of the first stellation of the rhombic dodecahedron open unit cell. (Thesis). The University of Texas at El Paso. Retrieved from http://pqdtopen.proquest.com/#viewpdf?dispub=1477836

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16th Edition):

Lopez de Cardenas, Hugo Francisco Lopez. “Selection process, modified impact testing and failure analysis of an electron-beam-melted Ti-6Al-4V 3D tessellation based on the Eulerian path of the first stellation of the rhombic dodecahedron open unit cell.” 2010. Thesis, The University of Texas at El Paso. Accessed October 30, 2020. http://pqdtopen.proquest.com/#viewpdf?dispub=1477836.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7th Edition):

Lopez de Cardenas, Hugo Francisco Lopez. “Selection process, modified impact testing and failure analysis of an electron-beam-melted Ti-6Al-4V 3D tessellation based on the Eulerian path of the first stellation of the rhombic dodecahedron open unit cell.” 2010. Web. 30 Oct 2020.

Vancouver:

Lopez de Cardenas HFL. Selection process, modified impact testing and failure analysis of an electron-beam-melted Ti-6Al-4V 3D tessellation based on the Eulerian path of the first stellation of the rhombic dodecahedron open unit cell. [Internet] [Thesis]. The University of Texas at El Paso; 2010. [cited 2020 Oct 30]. Available from: http://pqdtopen.proquest.com/#viewpdf?dispub=1477836.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Lopez de Cardenas HFL. Selection process, modified impact testing and failure analysis of an electron-beam-melted Ti-6Al-4V 3D tessellation based on the Eulerian path of the first stellation of the rhombic dodecahedron open unit cell. [Thesis]. The University of Texas at El Paso; 2010. Available from: http://pqdtopen.proquest.com/#viewpdf?dispub=1477836

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation


University of Central Florida

9. Mohanty, Rashmi Ranjan. Phase-field simulation of microstructural development induced by interdiffusion fluxes under multiple gradients.

Degree: 2009, University of Central Florida

  The diffuse-interface phase-field model is a powerful method to simulate and predict mesoscale microstructure evolution in materials using fundamental properties of thermodynamics and kinetics.… (more)

Subjects/Keywords: Engineering, Metallurgy; Engineering, Materials Science

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Mohanty, R. R. (2009). Phase-field simulation of microstructural development induced by interdiffusion fluxes under multiple gradients. (Thesis). University of Central Florida. Retrieved from http://pqdtopen.proquest.com/#viewpdf?dispub=3357879

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16th Edition):

Mohanty, Rashmi Ranjan. “Phase-field simulation of microstructural development induced by interdiffusion fluxes under multiple gradients.” 2009. Thesis, University of Central Florida. Accessed October 30, 2020. http://pqdtopen.proquest.com/#viewpdf?dispub=3357879.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7th Edition):

Mohanty, Rashmi Ranjan. “Phase-field simulation of microstructural development induced by interdiffusion fluxes under multiple gradients.” 2009. Web. 30 Oct 2020.

Vancouver:

Mohanty RR. Phase-field simulation of microstructural development induced by interdiffusion fluxes under multiple gradients. [Internet] [Thesis]. University of Central Florida; 2009. [cited 2020 Oct 30]. Available from: http://pqdtopen.proquest.com/#viewpdf?dispub=3357879.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Mohanty RR. Phase-field simulation of microstructural development induced by interdiffusion fluxes under multiple gradients. [Thesis]. University of Central Florida; 2009. Available from: http://pqdtopen.proquest.com/#viewpdf?dispub=3357879

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

10. Trenkle, Jonathan C. Welding bulk metallic glass using nanostructured reactive multilayer foils.

Degree: 2008, The Johns Hopkins University

  We have used Al/Ni reactive foils to weld Zr57Ti 5Cu20Ni8Al10 metallic glasses. The welds are a composite morphology comprised of glass ligaments and intermetallic… (more)

Subjects/Keywords: Engineering, Metallurgy; Engineering, Materials Science

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Trenkle, J. C. (2008). Welding bulk metallic glass using nanostructured reactive multilayer foils. (Thesis). The Johns Hopkins University. Retrieved from http://pqdtopen.proquest.com/#viewpdf?dispub=3288609

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16th Edition):

Trenkle, Jonathan C. “Welding bulk metallic glass using nanostructured reactive multilayer foils.” 2008. Thesis, The Johns Hopkins University. Accessed October 30, 2020. http://pqdtopen.proquest.com/#viewpdf?dispub=3288609.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7th Edition):

Trenkle, Jonathan C. “Welding bulk metallic glass using nanostructured reactive multilayer foils.” 2008. Web. 30 Oct 2020.

Vancouver:

Trenkle JC. Welding bulk metallic glass using nanostructured reactive multilayer foils. [Internet] [Thesis]. The Johns Hopkins University; 2008. [cited 2020 Oct 30]. Available from: http://pqdtopen.proquest.com/#viewpdf?dispub=3288609.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Trenkle JC. Welding bulk metallic glass using nanostructured reactive multilayer foils. [Thesis]. The Johns Hopkins University; 2008. Available from: http://pqdtopen.proquest.com/#viewpdf?dispub=3288609

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

11. Zhang, Jie. Wear regimes and transitions in ceramic particulate-reinforced aluminum alloys.

Degree: PhD, Mechanical, Automotive, and Materials Engineering, 1995, National Library of Canada

 The purpose of this work was to study the dry sliding wear properties of aluminum matrix composites A356Al-SiC, 6061Al-Al2O3, 2014Al-SiC, with 0-20 pct. volume fraction… (more)

Subjects/Keywords: Engineering; Metallurgy.

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Zhang, J. (1995). Wear regimes and transitions in ceramic particulate-reinforced aluminum alloys. (Doctoral Dissertation). National Library of Canada. Retrieved from http://scholar.uwindsor.ca/etd/4555

Chicago Manual of Style (16th Edition):

Zhang, Jie. “Wear regimes and transitions in ceramic particulate-reinforced aluminum alloys.” 1995. Doctoral Dissertation, National Library of Canada. Accessed October 30, 2020. http://scholar.uwindsor.ca/etd/4555.

MLA Handbook (7th Edition):

Zhang, Jie. “Wear regimes and transitions in ceramic particulate-reinforced aluminum alloys.” 1995. Web. 30 Oct 2020.

Vancouver:

Zhang J. Wear regimes and transitions in ceramic particulate-reinforced aluminum alloys. [Internet] [Doctoral dissertation]. National Library of Canada; 1995. [cited 2020 Oct 30]. Available from: http://scholar.uwindsor.ca/etd/4555.

Council of Science Editors:

Zhang J. Wear regimes and transitions in ceramic particulate-reinforced aluminum alloys. [Doctoral Dissertation]. National Library of Canada; 1995. Available from: http://scholar.uwindsor.ca/etd/4555

12. Pelayo Chagoya, Graciela. Development of a knowledge-based system for the control of 319-aluminum melt quality and prediction of casting characteristics.

Degree: MA, Industrial and Manufacturing Systems Engineering, 2001, National Library of Canada

 Knowledge Based Systems are computer programs used in situations where the use of heuristic knowledge and reasoning offers the only possibility of a solution mainly… (more)

Subjects/Keywords: Engineering; Metallurgy.

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Pelayo Chagoya, G. (2001). Development of a knowledge-based system for the control of 319-aluminum melt quality and prediction of casting characteristics. (Masters Thesis). National Library of Canada. Retrieved from http://scholar.uwindsor.ca/etd/1703

Chicago Manual of Style (16th Edition):

Pelayo Chagoya, Graciela. “Development of a knowledge-based system for the control of 319-aluminum melt quality and prediction of casting characteristics.” 2001. Masters Thesis, National Library of Canada. Accessed October 30, 2020. http://scholar.uwindsor.ca/etd/1703.

MLA Handbook (7th Edition):

Pelayo Chagoya, Graciela. “Development of a knowledge-based system for the control of 319-aluminum melt quality and prediction of casting characteristics.” 2001. Web. 30 Oct 2020.

Vancouver:

Pelayo Chagoya G. Development of a knowledge-based system for the control of 319-aluminum melt quality and prediction of casting characteristics. [Internet] [Masters thesis]. National Library of Canada; 2001. [cited 2020 Oct 30]. Available from: http://scholar.uwindsor.ca/etd/1703.

Council of Science Editors:

Pelayo Chagoya G. Development of a knowledge-based system for the control of 319-aluminum melt quality and prediction of casting characteristics. [Masters Thesis]. National Library of Canada; 2001. Available from: http://scholar.uwindsor.ca/etd/1703

13. Pan, Rong. Modelling weld microstructure development in resistance welded crossed bars.

Degree: MA, Mechanical, Automotive, and Materials Engineering, 1991, National Library of Canada

 In the present work, a two dimensional numerical model was established for resistance welded crossed bars which include a heat-affected zone. A post-weld heating algorithm… (more)

Subjects/Keywords: Engineering; Metallurgy.

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Pan, R. (1991). Modelling weld microstructure development in resistance welded crossed bars. (Masters Thesis). National Library of Canada. Retrieved from http://scholar.uwindsor.ca/etd/2765

Chicago Manual of Style (16th Edition):

Pan, Rong. “Modelling weld microstructure development in resistance welded crossed bars.” 1991. Masters Thesis, National Library of Canada. Accessed October 30, 2020. http://scholar.uwindsor.ca/etd/2765.

MLA Handbook (7th Edition):

Pan, Rong. “Modelling weld microstructure development in resistance welded crossed bars.” 1991. Web. 30 Oct 2020.

Vancouver:

Pan R. Modelling weld microstructure development in resistance welded crossed bars. [Internet] [Masters thesis]. National Library of Canada; 1991. [cited 2020 Oct 30]. Available from: http://scholar.uwindsor.ca/etd/2765.

Council of Science Editors:

Pan R. Modelling weld microstructure development in resistance welded crossed bars. [Masters Thesis]. National Library of Canada; 1991. Available from: http://scholar.uwindsor.ca/etd/2765


Carnegie Mellon University

14. Aaronson, Hubert I. The Kinetic Morphologies of Proeutectoid Ferrite in a Plain Carbon Steel.

Degree: 1954, Carnegie Mellon University

 The kinetic morphologies of proeutectoid ferrite developed in a coarse-grained 0.29% C, 0.76% Mn steel during isothermal reaction at temperatures from 775°C through 550 C… (more)

Subjects/Keywords: Engineering; Metallurgy

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Aaronson, H. I. (1954). The Kinetic Morphologies of Proeutectoid Ferrite in a Plain Carbon Steel. (Thesis). Carnegie Mellon University. Retrieved from http://repository.cmu.edu/dissertations/1098

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16th Edition):

Aaronson, Hubert I. “The Kinetic Morphologies of Proeutectoid Ferrite in a Plain Carbon Steel.” 1954. Thesis, Carnegie Mellon University. Accessed October 30, 2020. http://repository.cmu.edu/dissertations/1098.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7th Edition):

Aaronson, Hubert I. “The Kinetic Morphologies of Proeutectoid Ferrite in a Plain Carbon Steel.” 1954. Web. 30 Oct 2020.

Vancouver:

Aaronson HI. The Kinetic Morphologies of Proeutectoid Ferrite in a Plain Carbon Steel. [Internet] [Thesis]. Carnegie Mellon University; 1954. [cited 2020 Oct 30]. Available from: http://repository.cmu.edu/dissertations/1098.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Aaronson HI. The Kinetic Morphologies of Proeutectoid Ferrite in a Plain Carbon Steel. [Thesis]. Carnegie Mellon University; 1954. Available from: http://repository.cmu.edu/dissertations/1098

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

15. Kamarudin, Nur Hafizah. Processability of waste plastic bag as a novel binder system in metal injection molding.

Degree: Faculty of Mechanical and Manufacturing Engineering, 2017, Universiti Tun Hussein Onn Malaysia

 Metal injection molding is the most cost effective processes in powder metallurgy to produce small and intricate part for mass production. Many researchers are mainly… (more)

Subjects/Keywords: TN Mining engineering. Metallurgy

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Kamarudin, N. H. (2017). Processability of waste plastic bag as a novel binder system in metal injection molding. (Masters Thesis). Universiti Tun Hussein Onn Malaysia. Retrieved from http://eprints.uthm.edu.my/id/eprint/9915/

Chicago Manual of Style (16th Edition):

Kamarudin, Nur Hafizah. “Processability of waste plastic bag as a novel binder system in metal injection molding.” 2017. Masters Thesis, Universiti Tun Hussein Onn Malaysia. Accessed October 30, 2020. http://eprints.uthm.edu.my/id/eprint/9915/.

MLA Handbook (7th Edition):

Kamarudin, Nur Hafizah. “Processability of waste plastic bag as a novel binder system in metal injection molding.” 2017. Web. 30 Oct 2020.

Vancouver:

Kamarudin NH. Processability of waste plastic bag as a novel binder system in metal injection molding. [Internet] [Masters thesis]. Universiti Tun Hussein Onn Malaysia; 2017. [cited 2020 Oct 30]. Available from: http://eprints.uthm.edu.my/id/eprint/9915/.

Council of Science Editors:

Kamarudin NH. Processability of waste plastic bag as a novel binder system in metal injection molding. [Masters Thesis]. Universiti Tun Hussein Onn Malaysia; 2017. Available from: http://eprints.uthm.edu.my/id/eprint/9915/

16. Abdul Bakil, Siti Natrah. Reducing sintering temperature of Claytan stoneware using two different fluxes (soda lime silicate and borax decahydrate).

Degree: Faculty of Mechanical and Manufacturing Engineering, 2017, Universiti Tun Hussein Onn Malaysia

 Each year, the use of gasses for sintering stoneware in kiln furnace was gradually increasing. Therefore, reducing sintering temperature can help a stoneware production company… (more)

Subjects/Keywords: TN Mining engineering. Metallurgy

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Abdul Bakil, S. N. (2017). Reducing sintering temperature of Claytan stoneware using two different fluxes (soda lime silicate and borax decahydrate). (Masters Thesis). Universiti Tun Hussein Onn Malaysia. Retrieved from http://eprints.uthm.edu.my/id/eprint/10249/

Chicago Manual of Style (16th Edition):

Abdul Bakil, Siti Natrah. “Reducing sintering temperature of Claytan stoneware using two different fluxes (soda lime silicate and borax decahydrate).” 2017. Masters Thesis, Universiti Tun Hussein Onn Malaysia. Accessed October 30, 2020. http://eprints.uthm.edu.my/id/eprint/10249/.

MLA Handbook (7th Edition):

Abdul Bakil, Siti Natrah. “Reducing sintering temperature of Claytan stoneware using two different fluxes (soda lime silicate and borax decahydrate).” 2017. Web. 30 Oct 2020.

Vancouver:

Abdul Bakil SN. Reducing sintering temperature of Claytan stoneware using two different fluxes (soda lime silicate and borax decahydrate). [Internet] [Masters thesis]. Universiti Tun Hussein Onn Malaysia; 2017. [cited 2020 Oct 30]. Available from: http://eprints.uthm.edu.my/id/eprint/10249/.

Council of Science Editors:

Abdul Bakil SN. Reducing sintering temperature of Claytan stoneware using two different fluxes (soda lime silicate and borax decahydrate). [Masters Thesis]. Universiti Tun Hussein Onn Malaysia; 2017. Available from: http://eprints.uthm.edu.my/id/eprint/10249/

17. Mohd Amin, Azriszul. Application of restaurant waste lipids (RWL) as a binder component in metal injection moulding.

Degree: phd, Faculty of Mechanical and Manufacturing Engineering, 2017, Universiti Tun Hussein Onn Malaysia

 Application of Restaurant Waste Lipids (RWL) is introduced as binder component in metal injection moulding since it’s contains rich amounts of free fatty acids which… (more)

Subjects/Keywords: TN Mining engineering. Metallurgy

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Mohd Amin, A. (2017). Application of restaurant waste lipids (RWL) as a binder component in metal injection moulding. (Doctoral Dissertation). Universiti Tun Hussein Onn Malaysia. Retrieved from http://eprints.uthm.edu.my/id/eprint/10255/

Chicago Manual of Style (16th Edition):

Mohd Amin, Azriszul. “Application of restaurant waste lipids (RWL) as a binder component in metal injection moulding.” 2017. Doctoral Dissertation, Universiti Tun Hussein Onn Malaysia. Accessed October 30, 2020. http://eprints.uthm.edu.my/id/eprint/10255/.

MLA Handbook (7th Edition):

Mohd Amin, Azriszul. “Application of restaurant waste lipids (RWL) as a binder component in metal injection moulding.” 2017. Web. 30 Oct 2020.

Vancouver:

Mohd Amin A. Application of restaurant waste lipids (RWL) as a binder component in metal injection moulding. [Internet] [Doctoral dissertation]. Universiti Tun Hussein Onn Malaysia; 2017. [cited 2020 Oct 30]. Available from: http://eprints.uthm.edu.my/id/eprint/10255/.

Council of Science Editors:

Mohd Amin A. Application of restaurant waste lipids (RWL) as a binder component in metal injection moulding. [Doctoral Dissertation]. Universiti Tun Hussein Onn Malaysia; 2017. Available from: http://eprints.uthm.edu.my/id/eprint/10255/

18. Joon, Tan Kwok. Preparation of bioactive surface via gel oxidation on titanium for biomedical application (hip joint replacement).

Degree: phd, Faculty of Mechanical and Manufacturing Engineering, 2018, Universiti Tun Hussein Onn Malaysia

 Titanium and its alloys are widely used as implant in biomedical applications. They have good mechanical and chemical properties, biocompatibility and biointegration with human body,… (more)

Subjects/Keywords: TN Mining engineering. Metallurgy

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Joon, T. K. (2018). Preparation of bioactive surface via gel oxidation on titanium for biomedical application (hip joint replacement). (Doctoral Dissertation). Universiti Tun Hussein Onn Malaysia. Retrieved from http://eprints.uthm.edu.my/id/eprint/12127/

Chicago Manual of Style (16th Edition):

Joon, Tan Kwok. “Preparation of bioactive surface via gel oxidation on titanium for biomedical application (hip joint replacement).” 2018. Doctoral Dissertation, Universiti Tun Hussein Onn Malaysia. Accessed October 30, 2020. http://eprints.uthm.edu.my/id/eprint/12127/.

MLA Handbook (7th Edition):

Joon, Tan Kwok. “Preparation of bioactive surface via gel oxidation on titanium for biomedical application (hip joint replacement).” 2018. Web. 30 Oct 2020.

Vancouver:

Joon TK. Preparation of bioactive surface via gel oxidation on titanium for biomedical application (hip joint replacement). [Internet] [Doctoral dissertation]. Universiti Tun Hussein Onn Malaysia; 2018. [cited 2020 Oct 30]. Available from: http://eprints.uthm.edu.my/id/eprint/12127/.

Council of Science Editors:

Joon TK. Preparation of bioactive surface via gel oxidation on titanium for biomedical application (hip joint replacement). [Doctoral Dissertation]. Universiti Tun Hussein Onn Malaysia; 2018. Available from: http://eprints.uthm.edu.my/id/eprint/12127/

19. Abdul Rahman, Wan Fakhrulrazi. Comparison of performance and emission characteristics between ceramic and metallic catalytic converter.

Degree: mphil, Fakulti Teknologi Kejuruteraan, 2018, Universiti Tun Hussein Onn Malaysia

 Catalytic converters have been widely used on vehicles and have already been proved for many years to be the most effective technical solution to reduce… (more)

Subjects/Keywords: TN Mining engineering. Metallurgy

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Abdul Rahman, W. F. (2018). Comparison of performance and emission characteristics between ceramic and metallic catalytic converter. (Masters Thesis). Universiti Tun Hussein Onn Malaysia. Retrieved from http://eprints.uthm.edu.my/id/eprint/12373/

Chicago Manual of Style (16th Edition):

Abdul Rahman, Wan Fakhrulrazi. “Comparison of performance and emission characteristics between ceramic and metallic catalytic converter.” 2018. Masters Thesis, Universiti Tun Hussein Onn Malaysia. Accessed October 30, 2020. http://eprints.uthm.edu.my/id/eprint/12373/.

MLA Handbook (7th Edition):

Abdul Rahman, Wan Fakhrulrazi. “Comparison of performance and emission characteristics between ceramic and metallic catalytic converter.” 2018. Web. 30 Oct 2020.

Vancouver:

Abdul Rahman WF. Comparison of performance and emission characteristics between ceramic and metallic catalytic converter. [Internet] [Masters thesis]. Universiti Tun Hussein Onn Malaysia; 2018. [cited 2020 Oct 30]. Available from: http://eprints.uthm.edu.my/id/eprint/12373/.

Council of Science Editors:

Abdul Rahman WF. Comparison of performance and emission characteristics between ceramic and metallic catalytic converter. [Masters Thesis]. Universiti Tun Hussein Onn Malaysia; 2018. Available from: http://eprints.uthm.edu.my/id/eprint/12373/

20. Azhar, Mohd Faiz Hafeez. The effect of flower-like titania towards characteristics and performances of polysulfone mixed matrix membrane.

Degree: mphil, Faculty of Mechanical and Manufacturing Engineering, 2018, Universiti Tun Hussein Onn Malaysia

 For ages, the polymeric membrane such as PSf is widely used in liquid separation for various application as the polymer itself offer versatile and attractive… (more)

Subjects/Keywords: TN Mining engineering. Metallurgy

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Azhar, M. F. H. (2018). The effect of flower-like titania towards characteristics and performances of polysulfone mixed matrix membrane. (Masters Thesis). Universiti Tun Hussein Onn Malaysia. Retrieved from http://eprints.uthm.edu.my/id/eprint/12970/

Chicago Manual of Style (16th Edition):

Azhar, Mohd Faiz Hafeez. “The effect of flower-like titania towards characteristics and performances of polysulfone mixed matrix membrane.” 2018. Masters Thesis, Universiti Tun Hussein Onn Malaysia. Accessed October 30, 2020. http://eprints.uthm.edu.my/id/eprint/12970/.

MLA Handbook (7th Edition):

Azhar, Mohd Faiz Hafeez. “The effect of flower-like titania towards characteristics and performances of polysulfone mixed matrix membrane.” 2018. Web. 30 Oct 2020.

Vancouver:

Azhar MFH. The effect of flower-like titania towards characteristics and performances of polysulfone mixed matrix membrane. [Internet] [Masters thesis]. Universiti Tun Hussein Onn Malaysia; 2018. [cited 2020 Oct 30]. Available from: http://eprints.uthm.edu.my/id/eprint/12970/.

Council of Science Editors:

Azhar MFH. The effect of flower-like titania towards characteristics and performances of polysulfone mixed matrix membrane. [Masters Thesis]. Universiti Tun Hussein Onn Malaysia; 2018. Available from: http://eprints.uthm.edu.my/id/eprint/12970/

21. Firdianto, Ade. Ultrasonic treatment with nickel electroplating combined with oxidation for developing y-Al2O3 washcoat on Fe-Cr-Al substrate.

Degree: Fakulti Kejuruteraan Mekanikal dan Pembuatan, 2012, Universiti Tun Hussein Onn Malaysia

 Fe-Cr-Al is used as metallic support for catalytic converter due to its high thermal conductivity, lower heat capacity, high temperature and mechanical shock resistance. γ-Al2O3… (more)

Subjects/Keywords: TN Mining engineering. Metallurgy

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Firdianto, A. (2012). Ultrasonic treatment with nickel electroplating combined with oxidation for developing y-Al2O3 washcoat on Fe-Cr-Al substrate. (Masters Thesis). Universiti Tun Hussein Onn Malaysia. Retrieved from http://eprints.uthm.edu.my/id/eprint/2646/

Chicago Manual of Style (16th Edition):

Firdianto, Ade. “Ultrasonic treatment with nickel electroplating combined with oxidation for developing y-Al2O3 washcoat on Fe-Cr-Al substrate.” 2012. Masters Thesis, Universiti Tun Hussein Onn Malaysia. Accessed October 30, 2020. http://eprints.uthm.edu.my/id/eprint/2646/.

MLA Handbook (7th Edition):

Firdianto, Ade. “Ultrasonic treatment with nickel electroplating combined with oxidation for developing y-Al2O3 washcoat on Fe-Cr-Al substrate.” 2012. Web. 30 Oct 2020.

Vancouver:

Firdianto A. Ultrasonic treatment with nickel electroplating combined with oxidation for developing y-Al2O3 washcoat on Fe-Cr-Al substrate. [Internet] [Masters thesis]. Universiti Tun Hussein Onn Malaysia; 2012. [cited 2020 Oct 30]. Available from: http://eprints.uthm.edu.my/id/eprint/2646/.

Council of Science Editors:

Firdianto A. Ultrasonic treatment with nickel electroplating combined with oxidation for developing y-Al2O3 washcoat on Fe-Cr-Al substrate. [Masters Thesis]. Universiti Tun Hussein Onn Malaysia; 2012. Available from: http://eprints.uthm.edu.my/id/eprint/2646/

22. Mustafa, Najwa. Processibility of black garbage bag as a novel binder system in metal injection molding.

Degree: Fakulti Kejuruteraan Mekanikal dan Pembuatan, 2012, Universiti Tun Hussein Onn Malaysia

 The issues to be highlighted here is to fundamentally evaluate the potential of using waste Garbage Bag from High Density Polyethylene (HDPE) as a backbone… (more)

Subjects/Keywords: TN Mining engineering. Metallurgy

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Mustafa, N. (2012). Processibility of black garbage bag as a novel binder system in metal injection molding. (Masters Thesis). Universiti Tun Hussein Onn Malaysia. Retrieved from http://eprints.uthm.edu.my/id/eprint/3678/

Chicago Manual of Style (16th Edition):

Mustafa, Najwa. “Processibility of black garbage bag as a novel binder system in metal injection molding.” 2012. Masters Thesis, Universiti Tun Hussein Onn Malaysia. Accessed October 30, 2020. http://eprints.uthm.edu.my/id/eprint/3678/.

MLA Handbook (7th Edition):

Mustafa, Najwa. “Processibility of black garbage bag as a novel binder system in metal injection molding.” 2012. Web. 30 Oct 2020.

Vancouver:

Mustafa N. Processibility of black garbage bag as a novel binder system in metal injection molding. [Internet] [Masters thesis]. Universiti Tun Hussein Onn Malaysia; 2012. [cited 2020 Oct 30]. Available from: http://eprints.uthm.edu.my/id/eprint/3678/.

Council of Science Editors:

Mustafa N. Processibility of black garbage bag as a novel binder system in metal injection molding. [Masters Thesis]. Universiti Tun Hussein Onn Malaysia; 2012. Available from: http://eprints.uthm.edu.my/id/eprint/3678/

23. Abdulslam, Salahaldeen Salem. Effect of temperature and curing time on the fabrication of polysiloxane fzlled silica synthetic via casting and compression moulding methods.

Degree: Fakulti Kejuruteraan Mekanikal dan Pembuatan, 2013, Universiti Tun Hussein Onn Malaysia

 Polysiloxane is a specialty synthetic elastomer that provides a unique balance of chemical and mechanical properties required by many industrial applications. It is widely used… (more)

Subjects/Keywords: TN Mining engineering. Metallurgy

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Abdulslam, S. S. (2013). Effect of temperature and curing time on the fabrication of polysiloxane fzlled silica synthetic via casting and compression moulding methods. (Masters Thesis). Universiti Tun Hussein Onn Malaysia. Retrieved from http://eprints.uthm.edu.my/id/eprint/5539/

Chicago Manual of Style (16th Edition):

Abdulslam, Salahaldeen Salem. “Effect of temperature and curing time on the fabrication of polysiloxane fzlled silica synthetic via casting and compression moulding methods.” 2013. Masters Thesis, Universiti Tun Hussein Onn Malaysia. Accessed October 30, 2020. http://eprints.uthm.edu.my/id/eprint/5539/.

MLA Handbook (7th Edition):

Abdulslam, Salahaldeen Salem. “Effect of temperature and curing time on the fabrication of polysiloxane fzlled silica synthetic via casting and compression moulding methods.” 2013. Web. 30 Oct 2020.

Vancouver:

Abdulslam SS. Effect of temperature and curing time on the fabrication of polysiloxane fzlled silica synthetic via casting and compression moulding methods. [Internet] [Masters thesis]. Universiti Tun Hussein Onn Malaysia; 2013. [cited 2020 Oct 30]. Available from: http://eprints.uthm.edu.my/id/eprint/5539/.

Council of Science Editors:

Abdulslam SS. Effect of temperature and curing time on the fabrication of polysiloxane fzlled silica synthetic via casting and compression moulding methods. [Masters Thesis]. Universiti Tun Hussein Onn Malaysia; 2013. Available from: http://eprints.uthm.edu.my/id/eprint/5539/

24. Mohd Nawi, Fifi Khazanie. Mixing and rheological characterization of water atomised stainless steel powder for metal injection moulding using waste polystyrene as binder system.

Degree: Fakulti Kejuruteraan Mekanikal dan Pembuatan, 2013, Universiti Tun Hussein Onn Malaysia

 The issues to be highlighted here is to fundamentally evaluate the potential of using waste polystyrene as a backbone binder in Metal Injection Moulding (MIM.)… (more)

Subjects/Keywords: TN Mining engineering. Metallurgy

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Mohd Nawi, F. K. (2013). Mixing and rheological characterization of water atomised stainless steel powder for metal injection moulding using waste polystyrene as binder system. (Masters Thesis). Universiti Tun Hussein Onn Malaysia. Retrieved from http://eprints.uthm.edu.my/id/eprint/5852/

Chicago Manual of Style (16th Edition):

Mohd Nawi, Fifi Khazanie. “Mixing and rheological characterization of water atomised stainless steel powder for metal injection moulding using waste polystyrene as binder system.” 2013. Masters Thesis, Universiti Tun Hussein Onn Malaysia. Accessed October 30, 2020. http://eprints.uthm.edu.my/id/eprint/5852/.

MLA Handbook (7th Edition):

Mohd Nawi, Fifi Khazanie. “Mixing and rheological characterization of water atomised stainless steel powder for metal injection moulding using waste polystyrene as binder system.” 2013. Web. 30 Oct 2020.

Vancouver:

Mohd Nawi FK. Mixing and rheological characterization of water atomised stainless steel powder for metal injection moulding using waste polystyrene as binder system. [Internet] [Masters thesis]. Universiti Tun Hussein Onn Malaysia; 2013. [cited 2020 Oct 30]. Available from: http://eprints.uthm.edu.my/id/eprint/5852/.

Council of Science Editors:

Mohd Nawi FK. Mixing and rheological characterization of water atomised stainless steel powder for metal injection moulding using waste polystyrene as binder system. [Masters Thesis]. Universiti Tun Hussein Onn Malaysia; 2013. Available from: http://eprints.uthm.edu.my/id/eprint/5852/

25. Othman, Mohd. Ashraf. New process of developing nanocrystalline FeCr for fuel cell application.

Degree: Fakulti Kejuruteraan Mekanikal dan Pembuatan, 2014, Universiti Tun Hussein Onn Malaysia

 The objectives of this study are to explore the high energy ball milling combined with ultrasonic treatment to develop smaller crystallite size, finer surface morphology,… (more)

Subjects/Keywords: TN Mining engineering. Metallurgy

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Othman, M. A. (2014). New process of developing nanocrystalline FeCr for fuel cell application. (Thesis). Universiti Tun Hussein Onn Malaysia. Retrieved from http://eprints.uthm.edu.my/id/eprint/6911/

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16th Edition):

Othman, Mohd Ashraf. “New process of developing nanocrystalline FeCr for fuel cell application.” 2014. Thesis, Universiti Tun Hussein Onn Malaysia. Accessed October 30, 2020. http://eprints.uthm.edu.my/id/eprint/6911/.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7th Edition):

Othman, Mohd Ashraf. “New process of developing nanocrystalline FeCr for fuel cell application.” 2014. Web. 30 Oct 2020.

Vancouver:

Othman MA. New process of developing nanocrystalline FeCr for fuel cell application. [Internet] [Thesis]. Universiti Tun Hussein Onn Malaysia; 2014. [cited 2020 Oct 30]. Available from: http://eprints.uthm.edu.my/id/eprint/6911/.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Othman MA. New process of developing nanocrystalline FeCr for fuel cell application. [Thesis]. Universiti Tun Hussein Onn Malaysia; 2014. Available from: http://eprints.uthm.edu.my/id/eprint/6911/

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

26. Ibrahim , Mohd Halim Irwan. Characterization of waste polyethylene terephthalate (PET) as a sustainable binder for the application of green metal injection molding.

Degree: Fakulti Kejuruteraan Mekanikal dan Pembuatan, 2013, Universiti Tun Hussein Onn Malaysia

 Kertas ini menerangkan kebolehprosesan sisa polietilena Terephthalate (PET) plastik sebagai pengikat di dalam proses acuan suntikan logam-Ciri-ciri bahan kitar semula PET yang dicampur dengan keluli… (more)

Subjects/Keywords: TN Mining engineering. Metallurgy

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Ibrahim , M. H. I. (2013). Characterization of waste polyethylene terephthalate (PET) as a sustainable binder for the application of green metal injection molding. (Thesis). Universiti Tun Hussein Onn Malaysia. Retrieved from http://eprints.uthm.edu.my/id/eprint/7969/

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16th Edition):

Ibrahim , Mohd Halim Irwan. “Characterization of waste polyethylene terephthalate (PET) as a sustainable binder for the application of green metal injection molding.” 2013. Thesis, Universiti Tun Hussein Onn Malaysia. Accessed October 30, 2020. http://eprints.uthm.edu.my/id/eprint/7969/.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7th Edition):

Ibrahim , Mohd Halim Irwan. “Characterization of waste polyethylene terephthalate (PET) as a sustainable binder for the application of green metal injection molding.” 2013. Web. 30 Oct 2020.

Vancouver:

Ibrahim MHI. Characterization of waste polyethylene terephthalate (PET) as a sustainable binder for the application of green metal injection molding. [Internet] [Thesis]. Universiti Tun Hussein Onn Malaysia; 2013. [cited 2020 Oct 30]. Available from: http://eprints.uthm.edu.my/id/eprint/7969/.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Ibrahim MHI. Characterization of waste polyethylene terephthalate (PET) as a sustainable binder for the application of green metal injection molding. [Thesis]. Universiti Tun Hussein Onn Malaysia; 2013. Available from: http://eprints.uthm.edu.my/id/eprint/7969/

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

27. M. Amin, Sri Yulis. Pengacuan suntikan karbida tungsten tersimen dengan sistem bahan pengikat berasaskan stearin sawit.

Degree: phd, Fakulti Kejuruteraan dan Alam Bina, 2015, Universiti Kebangsaan Malaysia

 Proses pengacuan suntikan logam (Metal Injection Molding, MIM) semakin mendapat tempat di kalangan industri pembuatan kerana keupayaannya menghasilkan produk berbentuk kompleks secara pukal. Dalam MIM,… (more)

Subjects/Keywords: TN Mining engineering. Metallurgy

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

M. Amin, S. Y. (2015). Pengacuan suntikan karbida tungsten tersimen dengan sistem bahan pengikat berasaskan stearin sawit. (Doctoral Dissertation). Universiti Kebangsaan Malaysia. Retrieved from http://eprints.uthm.edu.my/id/eprint/9124/

Chicago Manual of Style (16th Edition):

M. Amin, Sri Yulis. “Pengacuan suntikan karbida tungsten tersimen dengan sistem bahan pengikat berasaskan stearin sawit.” 2015. Doctoral Dissertation, Universiti Kebangsaan Malaysia. Accessed October 30, 2020. http://eprints.uthm.edu.my/id/eprint/9124/.

MLA Handbook (7th Edition):

M. Amin, Sri Yulis. “Pengacuan suntikan karbida tungsten tersimen dengan sistem bahan pengikat berasaskan stearin sawit.” 2015. Web. 30 Oct 2020.

Vancouver:

M. Amin SY. Pengacuan suntikan karbida tungsten tersimen dengan sistem bahan pengikat berasaskan stearin sawit. [Internet] [Doctoral dissertation]. Universiti Kebangsaan Malaysia; 2015. [cited 2020 Oct 30]. Available from: http://eprints.uthm.edu.my/id/eprint/9124/.

Council of Science Editors:

M. Amin SY. Pengacuan suntikan karbida tungsten tersimen dengan sistem bahan pengikat berasaskan stearin sawit. [Doctoral Dissertation]. Universiti Kebangsaan Malaysia; 2015. Available from: http://eprints.uthm.edu.my/id/eprint/9124/

28. Shahizan, Nurul Raihan. The influences of holmium on the solidification, microstructure and mechanical properties of elektron 21 magnesium alloy.

Degree: mphil, Faculty of Mechanical and Manufacturing Engineering, 2018, Universiti Tun Hussein Onn Malaysia

 The solidification parameter of Elektron 21 magnesium alloys with various Ho concentrations were investigated using computer-aided cooling curve thermal analysis system, and the solidification microstructure… (more)

Subjects/Keywords: TN Mining engineering. Metallurgy

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Shahizan, N. R. (2018). The influences of holmium on the solidification, microstructure and mechanical properties of elektron 21 magnesium alloy. (Masters Thesis). Universiti Tun Hussein Onn Malaysia. Retrieved from http://eprints.uthm.edu.my/id/eprint/12625/

Chicago Manual of Style (16th Edition):

Shahizan, Nurul Raihan. “The influences of holmium on the solidification, microstructure and mechanical properties of elektron 21 magnesium alloy.” 2018. Masters Thesis, Universiti Tun Hussein Onn Malaysia. Accessed October 30, 2020. http://eprints.uthm.edu.my/id/eprint/12625/.

MLA Handbook (7th Edition):

Shahizan, Nurul Raihan. “The influences of holmium on the solidification, microstructure and mechanical properties of elektron 21 magnesium alloy.” 2018. Web. 30 Oct 2020.

Vancouver:

Shahizan NR. The influences of holmium on the solidification, microstructure and mechanical properties of elektron 21 magnesium alloy. [Internet] [Masters thesis]. Universiti Tun Hussein Onn Malaysia; 2018. [cited 2020 Oct 30]. Available from: http://eprints.uthm.edu.my/id/eprint/12625/.

Council of Science Editors:

Shahizan NR. The influences of holmium on the solidification, microstructure and mechanical properties of elektron 21 magnesium alloy. [Masters Thesis]. Universiti Tun Hussein Onn Malaysia; 2018. Available from: http://eprints.uthm.edu.my/id/eprint/12625/


Stellenbosch University

29. Charikinya, Edson. A modelling framework to determine the value proposition of microwave treatment of mineral ores.

Degree: Process Engineering, 2011, Stellenbosch University

Thesis (MScEng (Process Engineering)) – University of Stellenbosch, 2011.

ENGLISH ABSTRACT: The extraction of mineral values from ore requires liberation of the minerals followed by separation.… (more)

Subjects/Keywords: Process engineering; Metallurgy; Ore-dressing

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Charikinya, E. (2011). A modelling framework to determine the value proposition of microwave treatment of mineral ores. (Thesis). Stellenbosch University. Retrieved from http://hdl.handle.net/10019.1/6498

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16th Edition):

Charikinya, Edson. “A modelling framework to determine the value proposition of microwave treatment of mineral ores.” 2011. Thesis, Stellenbosch University. Accessed October 30, 2020. http://hdl.handle.net/10019.1/6498.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7th Edition):

Charikinya, Edson. “A modelling framework to determine the value proposition of microwave treatment of mineral ores.” 2011. Web. 30 Oct 2020.

Vancouver:

Charikinya E. A modelling framework to determine the value proposition of microwave treatment of mineral ores. [Internet] [Thesis]. Stellenbosch University; 2011. [cited 2020 Oct 30]. Available from: http://hdl.handle.net/10019.1/6498.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Charikinya E. A modelling framework to determine the value proposition of microwave treatment of mineral ores. [Thesis]. Stellenbosch University; 2011. Available from: http://hdl.handle.net/10019.1/6498

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation


University of Illinois – Chicago

30. Kim, Moon Chul. Crystallization and oxidation studies of iron-aluminum-zirconium rapidly solidified metallic glass ribbons.

Degree: 1988, University of Illinois – Chicago

Subjects/Keywords: Engineering; Metallurgy.

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Kim, M. C. (1988). Crystallization and oxidation studies of iron-aluminum-zirconium rapidly solidified metallic glass ribbons. (Thesis). University of Illinois – Chicago. Retrieved from http://hdl.handle.net/10027/18711

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16th Edition):

Kim, Moon Chul. “Crystallization and oxidation studies of iron-aluminum-zirconium rapidly solidified metallic glass ribbons.” 1988. Thesis, University of Illinois – Chicago. Accessed October 30, 2020. http://hdl.handle.net/10027/18711.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7th Edition):

Kim, Moon Chul. “Crystallization and oxidation studies of iron-aluminum-zirconium rapidly solidified metallic glass ribbons.” 1988. Web. 30 Oct 2020.

Vancouver:

Kim MC. Crystallization and oxidation studies of iron-aluminum-zirconium rapidly solidified metallic glass ribbons. [Internet] [Thesis]. University of Illinois – Chicago; 1988. [cited 2020 Oct 30]. Available from: http://hdl.handle.net/10027/18711.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Kim MC. Crystallization and oxidation studies of iron-aluminum-zirconium rapidly solidified metallic glass ribbons. [Thesis]. University of Illinois – Chicago; 1988. Available from: http://hdl.handle.net/10027/18711

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

[1] [2] [3] [4] [5] … [52]

.