Advanced search options

Advanced Search Options 🞨

Browse by author name (“Author name starts with…”).

Find ETDs with:

in
/  
in
/  
in
/  
in

Written in Published in Earliest date Latest date

Sorted by

Results per page:

Dates: Last 2 Years

You searched for subject:(Critical Pressure Coefficient). One record found.

Search Limiters

Last 2 Years | English Only

No search limiters apply to these results.

▼ Search Limiters


Kansas State University

1. Dahariya, Smreeti. High-pressure pool-boiling heat transfer enhancement and mechanism on engineered surfaces.

Degree: PhD, Department of Mechanical and Nuclear Engineering, 2020, Kansas State University

Boiling has received considerable attention in the technology advancement of electronics cooling for high-performance computing applications. Two-phase cooling has an advantage over a single-phase cooling in the high heat removal rate with a small thermal gradient due to the latent heat of vaporization. Many surface modifications have been done in the past including surface roughness, mixed wettability and, porous wick copper play a crucial role in the liquid-vapor phase change heat transfer. However, the mechanisms of high-pressure pool-boiling heat transfer enhancement due to surface modifications has not been well studied or understood. The properties of water, such as the latent heat of vaporization, surface tension, the difference in specific volume of liquid and vapor, decrease at high-pressure. High-pressure pool-boiling heat transfer enhancement is studied fundamentally on various engineered surfaces. The boiling tests are performed at a maximum pressure of 90 psig (620.5 kPa) and then compared to results at 0 psig (0 kPa). The results indicate that the pressure influences the boiling performance through changes in bubble dynamics. The bubble departure diameter, bubble departure frequency, and the active nucleation sites change with pressure. The pool-boiling heat transfer enhancement of a Teflon© coated surface is also experimentally tested, using water as the working fluid. The boiling results are compared with a plain surface at two different pressures, 30 and 45 psig. The maximum heat transfer enhancement is found at the low heat fluxes. At high heat fluxes, a negligible effect is observed in HTC. The primary reasons for the HTC enhancement at low heat fluxes are active nucleation sites at low wall superheat and bubble departure size. The Teflon© coated surface promotes nucleation because of the lower surface energy requirement. The boiling results are also obtained for wick surfaces. The wick surfaces are fabricated using a sintering process. The boiling results are compared with a plain surface. The reasons for enhancements in the pool-boiling performance are primarily due to increased bubble generation, higher bubble release frequency, reduced thermal-hydraulic length modulation, and enhanced thermal conductivity due to the sintered wick layer. The analysis suggests that the Rayleigh-critical wavelength decreases by 4.67 % of varying pressure, which may cause the bubble pinning between the gaps of sintered particles and avoids the bubble coalescence. Changes in the pitch distance indicate that a liquid-vapor phase separation happens at the solid/liquid interface, which impacts the heat-transfer performance significantly. Similarly, the role of the high-pressure over the wicking layer is further analyzed and studied. It is found that the critical flow length, λu reduces by three times with 200 μm particles. The results suggest that the porous wick layer provides a capillary-assist to liquid flow effect, and delays the surface dry out. The surface modification and the pressure amplify the boiling heat… Advisors/Committee Members: Amy R. Betz.

Subjects/Keywords: Critical Heat Flux; Heat Transfer Coefficient; Thermal-Hydraulic; Rayleigh-Critical Wavelength; Pinning Mechanism; Capillary Pressure

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Dahariya, S. (2020). High-pressure pool-boiling heat transfer enhancement and mechanism on engineered surfaces. (Doctoral Dissertation). Kansas State University. Retrieved from http://hdl.handle.net/2097/40311

Chicago Manual of Style (16th Edition):

Dahariya, Smreeti. “High-pressure pool-boiling heat transfer enhancement and mechanism on engineered surfaces.” 2020. Doctoral Dissertation, Kansas State University. Accessed January 17, 2021. http://hdl.handle.net/2097/40311.

MLA Handbook (7th Edition):

Dahariya, Smreeti. “High-pressure pool-boiling heat transfer enhancement and mechanism on engineered surfaces.” 2020. Web. 17 Jan 2021.

Vancouver:

Dahariya S. High-pressure pool-boiling heat transfer enhancement and mechanism on engineered surfaces. [Internet] [Doctoral dissertation]. Kansas State University; 2020. [cited 2021 Jan 17]. Available from: http://hdl.handle.net/2097/40311.

Council of Science Editors:

Dahariya S. High-pressure pool-boiling heat transfer enhancement and mechanism on engineered surfaces. [Doctoral Dissertation]. Kansas State University; 2020. Available from: http://hdl.handle.net/2097/40311

.