subject:(CNC)

University of Debrecen

1. Kovács, Imre. Léptetőmotor és CNC működése és vezérlése .

Degree: DE – TEK – Természettudományi és Technológiai Kar – Fizikai Intézet, 2010, University of Debrecen

Léptetőmotorok típusai, bemutatásai, jellemzésük és vezérléseik. CNC gép általános ismertetése, általam tervezett CNC bemutatása. Advisors/Committee Members: Szabó, Zsolt (advisor).

Subjects/Keywords: léptetőmotor; CNC

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Kovács, I. (2010). Léptetőmotor és CNC működése és vezérlése . (Thesis). University of Debrecen. Retrieved from http://hdl.handle.net/2437/100621

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Kovács, Imre. “Léptetőmotor és CNC működése és vezérlése .” 2010. Thesis, University of Debrecen. Accessed March 06, 2021. http://hdl.handle.net/2437/100621.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Kovács, Imre. “Léptetőmotor és CNC működése és vezérlése .” 2010. Web. 06 Mar 2021.

Vancouver:

Kovács I. Léptetőmotor és CNC működése és vezérlése . [Internet] [Thesis]. University of Debrecen; 2010. [cited 2021 Mar 06]. Available from: http://hdl.handle.net/2437/100621.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Kovács I. Léptetőmotor és CNC működése és vezérlése . [Thesis]. University of Debrecen; 2010. Available from: http://hdl.handle.net/2437/100621

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

2. Hellberg, Patrik. Ställtidsförbättring på Cejn AB : SMED arbete i maskiner som bearbetar rostfritt material.

Degree: Engineering Science, 2015, University of Skövde

URL: http://urn.kb.se/resolve?urn=urn:nbn:se:his:diva-11244

► Företaget Cejn AB har idag svårt att konkurrera prismässigt på marknaden när det gäller vissa rostfria detaljer. Ett led i att minska kostnaderna för… (more)

▼ Företaget Cejn AB har idag svårt att konkurrera prismässigt på marknaden när det gäller vissa rostfria detaljer. Ett led i att minska kostnaderna för att producera artiklarna är önskemålet från företagets sida att se efter om det går att genomföra en ställtidsreducering på maskincellen, se bilaga 5, som tillverkar rostfritt. Företaget har även önskemål om att en checklista ska tas fram för hur ställarbetet ska gå till i cellen, för om möjligt standardisera arbetet. Skiftgången i cellen är idag tvåskift och maskinerna är bemannade med en operatör per maskin och skift. Nulägesanalysen, som gjordes i början av projektet, visar att den genomsnittliga ställtiden idag är på ca 18 % av planerad produktionstid. Önskad arbetsmetod från företagets sida var SMED (Singel Minute Exchange of Die), metoden myntades av Shiego Shingo som kom fram till att ett ställ, tiden det tar att byta produktion i en maskin av en produkt till en annan, bör kunna ske på under tio minuter. Metoden bygger på att förvandla inre ställ, arbete som pågår när maskinen står still, till yttre ställ, arbete som pågår när maskinen går. Endast de moment som måste göras när maskinen står still ska vara med i det inre stället. För att mäta den effekt SMED-arbetet medför och för att se hur lång tid som varje moment tar användes en tidsstudie. Valet föll på att använda en kontinuerlig klocka under tidtagningen. Tidsstudiedokumentet som användes för att notera tiderna i var framtaget med ursprung i de inledande observationerna. Då Cejn AB har Lean som produktionsfilosofi har ett antal verktyg inom området använts under arbetet. Övergripande arbetsmetod för arbetet har varit PDCA (Plan, Do, Check, Act), där varje mindre moment i arbetet har delats ned i mindre PDCA-cykler. Utifrån den inledande tidsstudien beräknades ett teoretiskt resultat fram, det visar på att bara genom att förändra den ordning som operatören utför arbetsmomenten i går det att minska ställtiden med ca 20 %. För att verifiera det resultatet och för att testa den checklista som var framtagen gjordes en pilotstudie. Den visar på att förändringen är ca 11 %, vilket beror på att de ställ som observerades var krångligare och svårare än de som den inledande studien mätte. Ovanan med att arbeta utefter det nya arbetssättet för operatörerna är även det en bidragande orsak till att det är en diskrepans mellan teoretiskt och verkligt utfall. Under pilotstudien testades även den ställåda som var framtagen i projektet, vilket mottogs bra av operatörerna. Resultatet från pilotstudien visar att ställådan har effekt på momentet med att montera verktyg. Effekten är att tiden minskar med ca 8 % av att den inre ställtiden på det momentet. De av Cejn AB satta målen har uppnåtts då ställtidsreducering kan påvisas och checklistor har tagits fram. Det nya arbetssättet kan standardiseras av företaget.

Subjects/Keywords: SMED; CNC

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Hellberg, P. (2015). Ställtidsförbättring på Cejn AB : SMED arbete i maskiner som bearbetar rostfritt material. (Thesis). University of Skövde. Retrieved from http://urn.kb.se/resolve?urn=urn:nbn:se:his:diva-11244

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Hellberg, Patrik. “Ställtidsförbättring på Cejn AB : SMED arbete i maskiner som bearbetar rostfritt material.” 2015. Thesis, University of Skövde. Accessed March 06, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:his:diva-11244.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Hellberg, Patrik. “Ställtidsförbättring på Cejn AB : SMED arbete i maskiner som bearbetar rostfritt material.” 2015. Web. 06 Mar 2021.

Vancouver:

Hellberg P. Ställtidsförbättring på Cejn AB : SMED arbete i maskiner som bearbetar rostfritt material. [Internet] [Thesis]. University of Skövde; 2015. [cited 2021 Mar 06]. Available from: http://urn.kb.se/resolve?urn=urn:nbn:se:his:diva-11244.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Hellberg P. Ställtidsförbättring på Cejn AB : SMED arbete i maskiner som bearbetar rostfritt material. [Thesis]. University of Skövde; 2015. Available from: http://urn.kb.se/resolve?urn=urn:nbn:se:his:diva-11244

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

3. Sghari, Soufien. Rôle morphogénétique de la crête neurale céphalique au cours du développement précoce de l'oeil : Morphogenetic role of cephalic neural crest during early development of the eye.

Degree: Docteur es, Aspects moléculaires et cellulaires de la biologie, 2015, Université Paris-Saclay (ComUE)

URL: http://www.theses.fr/2015SACLS053

►

La crête neurale céphalique (CNC) est une structure pluripotente à l'origine de la totalité du squelette de la face et de la voûte crânienne. L'absence de… (more)

▼

La crête neurale céphalique (CNC) est une structure pluripotente à l'origine de la totalité du squelette de la face et de la voûte crânienne. L'absence de la CNC est associée à des malformations du cerveau antérieur et des défauts oculaires qui reproduisent les malformations congénitales humaines: microcéphalie, holoprosencéphalie, aniridie, chambre antérieure manquante, colobome congénital, désorganisation du cristallin, agénésie des paupières, strabisme précoce (Alward 2000, Creuzet 2009, Williams and Bohnsack 2015). Dans notre étude, l'augmentation hétérochronique de la signalisation Bmp7 au niveau de la plaque préchordale (PPC) a engendré une perturbation de la migration de la CNC associée à une fusion des deux champs oculaires en un seul œil cyclope. Cette cyclopie, contrairement aux études antérieures (Chiang et al. 1996, Golden et al. 1999) est précédée par une perturbation de la constriction apicale au niveau des vésicules optiques (VO) au stade Hamburger-Hamilton (HH) 12 et qui est responsable de l'invagination dorsale des VO et leur séparation du reste du tube neural. Au niveau moléculaire, nous avons enregistré une augmentation de la signalisation Wnt1 très tot après le traitement (2h) dans la CNC. Cette augmentation s'étend rostralement ce qui suggère que Wnt1 pourrait etre impliqué dans la perturbation du développement oculaire. Pour tester cette hypothèse, nous avons tenté des expériences de sauvetage par l'inactivation de la signalisation Wnt1 par ARN interférence. Nous avons observé une amélioration du phénotype mais les yeux sont restés morphologiquement en hypotélorisme, c'est-à-dire trop proches. Des coupes coronales au stade E8 (32-33HH) ont montré que les yeux sont synophtalmiques, deux yeux dans un seul orbite, et sont restés fusionnés au télencéphale. Au niveau moléculaire, nous avons observé aussi une diminution de l'expression de Wnt2b au niveau des VO chez l'embryon cyclope et que cette diminution persiste malgré le sauvetage par Wnt1. Pour comprendre cette signalisation, nous avons tenté une deuxième expérience de sauvetage avec ARN interférence contre Wnt1 et un vecteur plasmidique exprimant Wnt2b dans le tube neural et les VO respectivement. Vers E8 l'embryon ressemble au contrôle mais avec persistance de fusion entre les VO et le télencéphale. L'hybridation in situ a montré une diminution du niveau d'expression de Foxg1 à 12HH dans la partie dorsale des VO au niveau de la frontière entre la partie rostrale du diencéphale et le télencéphale (RD/T) dans les deux tentatives de sauvetage ce qui suggère que ce gène pourrait être impliqué dans la séparation rostrale des VO du télencéphale.

Cephalic neural crest (CNC) is a pluripotent structure giving rise to entire skeleton of the face and skull. Absence of CNC is associated with forebrain and eye defects that mimic human congénital malformations: microcephaly, holoprosencephaly, aniridia, missing anterior chamber, coloboma, congenital dislocation of the lens, agenesis of eyelid and early strabismus. (Alward 2000 Creuzet 2009, Williams and…

Advisors/Committee Members: Creuzet, Sophie (thesis director).

Subjects/Keywords: Cnc; Cyclopie; Poulet; Cnc; Cyclopia; Chicken; Electroporation

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Sghari, S. (2015). Rôle morphogénétique de la crête neurale céphalique au cours du développement précoce de l'oeil : Morphogenetic role of cephalic neural crest during early development of the eye. (Doctoral Dissertation). Université Paris-Saclay (ComUE). Retrieved from http://www.theses.fr/2015SACLS053

Chicago Manual of Style (16^th Edition):

Sghari, Soufien. “Rôle morphogénétique de la crête neurale céphalique au cours du développement précoce de l'oeil : Morphogenetic role of cephalic neural crest during early development of the eye.” 2015. Doctoral Dissertation, Université Paris-Saclay (ComUE). Accessed March 06, 2021. http://www.theses.fr/2015SACLS053.

MLA Handbook (7^th Edition):

Sghari, Soufien. “Rôle morphogénétique de la crête neurale céphalique au cours du développement précoce de l'oeil : Morphogenetic role of cephalic neural crest during early development of the eye.” 2015. Web. 06 Mar 2021.

Vancouver:

Sghari S. Rôle morphogénétique de la crête neurale céphalique au cours du développement précoce de l'oeil : Morphogenetic role of cephalic neural crest during early development of the eye. [Internet] [Doctoral dissertation]. Université Paris-Saclay (ComUE); 2015. [cited 2021 Mar 06]. Available from: http://www.theses.fr/2015SACLS053.

Council of Science Editors:

Sghari S. Rôle morphogénétique de la crête neurale céphalique au cours du développement précoce de l'oeil : Morphogenetic role of cephalic neural crest during early development of the eye. [Doctoral Dissertation]. Université Paris-Saclay (ComUE); 2015. Available from: http://www.theses.fr/2015SACLS053

Brno University of Technology

4. Kollár, Adam. Ekonomické vyhodnocení CNC stroje ve firmě: CNC Machine in Condition a Firm and its Economic Evaluation.

Degree: 2018, Brno University of Technology

URL: http://hdl.handle.net/11012/33902

► The aim of bachelor’s thesis is analyze of the application of the CNC machines for the production, target to the economical effects of the machining… (more)

Subjects/Keywords: CNC obrábacie centrá; CNC a konvenčné technológie; Aplikácia CNC stroja; Ekonomické prínosy CNC stroja; CNC machines; CNC and conventional technology; Implementation of CNC machine; Economical benefits of CNC machine

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Kollár, A. (2018). Ekonomické vyhodnocení CNC stroje ve firmě: CNC Machine in Condition a Firm and its Economic Evaluation. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/33902

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Kollár, Adam. “Ekonomické vyhodnocení CNC stroje ve firmě: CNC Machine in Condition a Firm and its Economic Evaluation.” 2018. Thesis, Brno University of Technology. Accessed March 06, 2021. http://hdl.handle.net/11012/33902.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Kollár, Adam. “Ekonomické vyhodnocení CNC stroje ve firmě: CNC Machine in Condition a Firm and its Economic Evaluation.” 2018. Web. 06 Mar 2021.

Vancouver:

Kollár A. Ekonomické vyhodnocení CNC stroje ve firmě: CNC Machine in Condition a Firm and its Economic Evaluation. [Internet] [Thesis]. Brno University of Technology; 2018. [cited 2021 Mar 06]. Available from: http://hdl.handle.net/11012/33902.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Kollár A. Ekonomické vyhodnocení CNC stroje ve firmě: CNC Machine in Condition a Firm and its Economic Evaluation. [Thesis]. Brno University of Technology; 2018. Available from: http://hdl.handle.net/11012/33902

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

5. Kuchárik, Daniel. Ekonomické přínosy z nasazení CNC stroje ve strojírenské firmě: Economical Benefits of Implementation of CNC Machine to an Engineering Company.

Degree: 2019, Brno University of Technology

URL: http://hdl.handle.net/11012/9919

► The aim of bachelor’s thesis is the analyse of the application of the CNC machines for the production, target to the economical effects of the… (more)

Subjects/Keywords: CNC obrábacie centrá; CNC a konvenčné technológie; Aplikácia CNC stroja; Ekonomické prínosy CNC stroja; CNC machines; CNC and conventional technology; Implementation of CNC machine; Economical benefits of CNC machine

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Kuchárik, D. (2019). Ekonomické přínosy z nasazení CNC stroje ve strojírenské firmě: Economical Benefits of Implementation of CNC Machine to an Engineering Company. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/9919

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Kuchárik, Daniel. “Ekonomické přínosy z nasazení CNC stroje ve strojírenské firmě: Economical Benefits of Implementation of CNC Machine to an Engineering Company.” 2019. Thesis, Brno University of Technology. Accessed March 06, 2021. http://hdl.handle.net/11012/9919.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Kuchárik, Daniel. “Ekonomické přínosy z nasazení CNC stroje ve strojírenské firmě: Economical Benefits of Implementation of CNC Machine to an Engineering Company.” 2019. Web. 06 Mar 2021.

Vancouver:

Kuchárik D. Ekonomické přínosy z nasazení CNC stroje ve strojírenské firmě: Economical Benefits of Implementation of CNC Machine to an Engineering Company. [Internet] [Thesis]. Brno University of Technology; 2019. [cited 2021 Mar 06]. Available from: http://hdl.handle.net/11012/9919.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Kuchárik D. Ekonomické přínosy z nasazení CNC stroje ve strojírenské firmě: Economical Benefits of Implementation of CNC Machine to an Engineering Company. [Thesis]. Brno University of Technology; 2019. Available from: http://hdl.handle.net/11012/9919

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

6. Drlík, Michal. Souřadnicová CNC vrtačka: Drilling CNC machine.

Degree: 2019, Brno University of Technology

URL: http://hdl.handle.net/11012/4284

► This thesis deals with designing and realization of a CNC drill. The body of the thesis is divided into three parts: Firstly, a design of… (more)

Subjects/Keywords: CNC; Souřadnicová vrtačka; CNC; Drilling machine

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Drlík, M. (2019). Souřadnicová CNC vrtačka: Drilling CNC machine. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/4284

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Drlík, Michal. “Souřadnicová CNC vrtačka: Drilling CNC machine.” 2019. Thesis, Brno University of Technology. Accessed March 06, 2021. http://hdl.handle.net/11012/4284.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Drlík, Michal. “Souřadnicová CNC vrtačka: Drilling CNC machine.” 2019. Web. 06 Mar 2021.

Vancouver:

Drlík M. Souřadnicová CNC vrtačka: Drilling CNC machine. [Internet] [Thesis]. Brno University of Technology; 2019. [cited 2021 Mar 06]. Available from: http://hdl.handle.net/11012/4284.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Drlík M. Souřadnicová CNC vrtačka: Drilling CNC machine. [Thesis]. Brno University of Technology; 2019. Available from: http://hdl.handle.net/11012/4284

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

7. Jagoš, Roman. Konstrukce malé CNC frézky: Design of small CNC milling machine.

Degree: 2019, Brno University of Technology

URL: http://hdl.handle.net/11012/10092

► This master´s thesis deals with design of small CNC milling machines and comparing CNC tabletop milling machines in the world market. It is also done… (more)

Subjects/Keywords: Malá CNC frézka; stolní CNC frézka; osobní CNC frézka; konstrukce CNC frézky; Small CNC milling machine; tabletop CNC milling machine; personal CNC milling machine; design of CNC milling machine

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Jagoš, R. (2019). Konstrukce malé CNC frézky: Design of small CNC milling machine. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/10092

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Jagoš, Roman. “Konstrukce malé CNC frézky: Design of small CNC milling machine.” 2019. Thesis, Brno University of Technology. Accessed March 06, 2021. http://hdl.handle.net/11012/10092.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Jagoš, Roman. “Konstrukce malé CNC frézky: Design of small CNC milling machine.” 2019. Web. 06 Mar 2021.

Vancouver:

Jagoš R. Konstrukce malé CNC frézky: Design of small CNC milling machine. [Internet] [Thesis]. Brno University of Technology; 2019. [cited 2021 Mar 06]. Available from: http://hdl.handle.net/11012/10092.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Jagoš R. Konstrukce malé CNC frézky: Design of small CNC milling machine. [Thesis]. Brno University of Technology; 2019. Available from: http://hdl.handle.net/11012/10092

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

University of Waterloo

8. Chen, Christina (Qing Ge). Time-Optimal Feedrate Planning for Freeform Toolpaths for Manufacturing Applications.

Degree: 2018, University of Waterloo

URL: http://hdl.handle.net/10012/13040

► Optimality and computational efficiency are two desired yet competing attributes of time-optimal feedrate planning. A well-designed algorithm can vastly increase machining productivity, by reducing tool… (more)

▼ Optimality and computational efficiency are two desired yet competing attributes of time-optimal feedrate planning. A well-designed algorithm can vastly increase machining productivity, by reducing tool positioning time subject to limits of the machine tool and process kinematics. In the optimization, it is crucial to not overload the machining operation, saturate the actuators’ limits, or cause unwanted vibrations and contour errors. This presents a nonlinear optimization problem for achieving highest possible feedrates along a toolpath, while keeping the actuator level velocity, acceleration and jerk profiles limited. Methods proposed in literature either use highly elaborate nonlinear optimization solvers like Sequential Quadratic Programming (SQP), employ iterative heuristics which extends the computational time, or make conservative assumptions that reduces calculation time but lead to slower tool motion. This thesis proposes a new feedrate optimization algorithm, which combines recasting of the original problem into a Linear Programming (LP) form, and the development of a new windowing scheme to handle very long toolpaths. All constraint equations are linearized by applying B-spline discretization on the kinematic profiles, and approximating the nonlinear jerk equation with a linearized upper bound (so-called ‘pseudo-jerk’). The developed windowing algorithm first solves adjacent portions of the feed profile with zero boundary conditions at overlap points. Afterwards, using the Principle of Optimality, connection boundary conditions are identified that guarantee a feasible initial guess for blending the pre-solved adjacent feed profiles into one another, through a consecutive pass of LP. Experiments conducted at the sponsoring company of this research, Pratt & Whitney Canada (P&WC), show that the proposed algorithm is able to reliably reduce cycle time by up to 56% and 38% in two different contouring operations, without sacrificing dynamic positioning accuracy. Benchmarks carried out with respect to two earlier proposed feedrate optimization algorithms, validate both the time optimality and also drastic (nearly 60 times) reduction in the computational load, achieved with the new method. Part quality, robustness and feed drive positioning accuracy have also been validated in 3-axis surface machining of a part with 1030 waypoints and 10,000 constraint checkpoints.

Subjects/Keywords: Trajectory Optimization; CNC

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Chen, C. (. G. (2018). Time-Optimal Feedrate Planning for Freeform Toolpaths for Manufacturing Applications. (Thesis). University of Waterloo. Retrieved from http://hdl.handle.net/10012/13040

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Chen, Christina (Qing Ge). “Time-Optimal Feedrate Planning for Freeform Toolpaths for Manufacturing Applications.” 2018. Thesis, University of Waterloo. Accessed March 06, 2021. http://hdl.handle.net/10012/13040.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Chen, Christina (Qing Ge). “Time-Optimal Feedrate Planning for Freeform Toolpaths for Manufacturing Applications.” 2018. Web. 06 Mar 2021.

Vancouver:

Chen C(G. Time-Optimal Feedrate Planning for Freeform Toolpaths for Manufacturing Applications. [Internet] [Thesis]. University of Waterloo; 2018. [cited 2021 Mar 06]. Available from: http://hdl.handle.net/10012/13040.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Chen C(G. Time-Optimal Feedrate Planning for Freeform Toolpaths for Manufacturing Applications. [Thesis]. University of Waterloo; 2018. Available from: http://hdl.handle.net/10012/13040

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

University of Debrecen

9. Kiss, Alex. 3-tengelyű CNC maró-, gravírozó- és fúrógép léptetőmotor vezérlése mikrovezérlővel .

Degree: DE – TEK – Természettudományi és Technológiai Kar – Fizikai Intézet, 2013, University of Debrecen

URL: http://hdl.handle.net/2437/167771

A dolgozat bemutatja maga a CNC gépek felépítését, és a vezérelni kívánt CNC-t is. Továbbá bemutatásra kerülnek a léptetőmotorok és vezérlésük típusai. Végül ismerteti egy 3-tengelyű CNC maró-, gravírozó- és fúrógép léptetőmotor vezérlésének megtervezését, elkészítését mikrovezérlővel, C programozási nyelven. Advisors/Committee Members: Misák, Sándor (advisor).

Subjects/Keywords: CNC; léptetőmotor; Mikrovezérlő

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Kiss, A. (2013). 3-tengelyű CNC maró-, gravírozó- és fúrógép léptetőmotor vezérlése mikrovezérlővel . (Thesis). University of Debrecen. Retrieved from http://hdl.handle.net/2437/167771

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Kiss, Alex. “3-tengelyű CNC maró-, gravírozó- és fúrógép léptetőmotor vezérlése mikrovezérlővel .” 2013. Thesis, University of Debrecen. Accessed March 06, 2021. http://hdl.handle.net/2437/167771.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Kiss, Alex. “3-tengelyű CNC maró-, gravírozó- és fúrógép léptetőmotor vezérlése mikrovezérlővel .” 2013. Web. 06 Mar 2021.

Vancouver:

Kiss A. 3-tengelyű CNC maró-, gravírozó- és fúrógép léptetőmotor vezérlése mikrovezérlővel . [Internet] [Thesis]. University of Debrecen; 2013. [cited 2021 Mar 06]. Available from: http://hdl.handle.net/2437/167771.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Kiss A. 3-tengelyű CNC maró-, gravírozó- és fúrógép léptetőmotor vezérlése mikrovezérlővel . [Thesis]. University of Debrecen; 2013. Available from: http://hdl.handle.net/2437/167771

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

10. Nešpor, Pavel. Deskripce CNC frézovacích a brousících strojů: Description of CNC milling and grinding machines.

Degree: 2019, Brno University of Technology

URL: http://hdl.handle.net/11012/4672

► Graduation from the Bachelor course at Faculty of Mechanical Engineering is finished by the thesis, which is focused in division of machine tools, further dealing… (more)

Subjects/Keywords: CNC frézovací stroje; CNC brousící stroje; CNC milling machines; CNC grinding machines

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Nešpor, P. (2019). Deskripce CNC frézovacích a brousících strojů: Description of CNC milling and grinding machines. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/4672

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Nešpor, Pavel. “Deskripce CNC frézovacích a brousících strojů: Description of CNC milling and grinding machines.” 2019. Thesis, Brno University of Technology. Accessed March 06, 2021. http://hdl.handle.net/11012/4672.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Nešpor, Pavel. “Deskripce CNC frézovacích a brousících strojů: Description of CNC milling and grinding machines.” 2019. Web. 06 Mar 2021.

Vancouver:

Nešpor P. Deskripce CNC frézovacích a brousících strojů: Description of CNC milling and grinding machines. [Internet] [Thesis]. Brno University of Technology; 2019. [cited 2021 Mar 06]. Available from: http://hdl.handle.net/11012/4672.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Nešpor P. Deskripce CNC frézovacích a brousících strojů: Description of CNC milling and grinding machines. [Thesis]. Brno University of Technology; 2019. Available from: http://hdl.handle.net/11012/4672

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

11. Vampola, Lukáš. Frézovací nástroje pro CNC obráběcí stroje: Milling tools for CNC machine tools.

Degree: 2019, Brno University of Technology

URL: http://hdl.handle.net/11012/12694

► In this bachelor’s thesis are described milling tools for CNC machine tools. The first part is target the CNC milling machines and CNC machining centres.… (more)

Subjects/Keywords: CNC frézky; CNC obráběcí centra; frézy; CNC milling machine; CNC machining centre; milling cutter

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Vampola, L. (2019). Frézovací nástroje pro CNC obráběcí stroje: Milling tools for CNC machine tools. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/12694

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Vampola, Lukáš. “Frézovací nástroje pro CNC obráběcí stroje: Milling tools for CNC machine tools.” 2019. Thesis, Brno University of Technology. Accessed March 06, 2021. http://hdl.handle.net/11012/12694.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Vampola, Lukáš. “Frézovací nástroje pro CNC obráběcí stroje: Milling tools for CNC machine tools.” 2019. Web. 06 Mar 2021.

Vancouver:

Vampola L. Frézovací nástroje pro CNC obráběcí stroje: Milling tools for CNC machine tools. [Internet] [Thesis]. Brno University of Technology; 2019. [cited 2021 Mar 06]. Available from: http://hdl.handle.net/11012/12694.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Vampola L. Frézovací nástroje pro CNC obráběcí stroje: Milling tools for CNC machine tools. [Thesis]. Brno University of Technology; 2019. Available from: http://hdl.handle.net/11012/12694

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

12. Turčín, Jiří. Výroba rotační součásti na CNC multifunkčním centru: Production of Rotating Parts on a CNC Multifunctional Center.

Degree: 2019, Brno University of Technology

URL: http://hdl.handle.net/11012/40039

► This bachelor thesis deals with a design of technological solution for the production of a part named “Pulsation wheel” suited for a CNC machining center.… (more)

Subjects/Keywords: CNC multifunkční centrum; CNC soustruh; CNC obráběcí centrum; technologický postup; rotační součást; multi-purpose CNC machining center; CNC lathe; CNC machining center; technological process; rotary part

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Turčín, J. (2019). Výroba rotační součásti na CNC multifunkčním centru: Production of Rotating Parts on a CNC Multifunctional Center. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/40039

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Turčín, Jiří. “Výroba rotační součásti na CNC multifunkčním centru: Production of Rotating Parts on a CNC Multifunctional Center.” 2019. Thesis, Brno University of Technology. Accessed March 06, 2021. http://hdl.handle.net/11012/40039.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Turčín, Jiří. “Výroba rotační součásti na CNC multifunkčním centru: Production of Rotating Parts on a CNC Multifunctional Center.” 2019. Web. 06 Mar 2021.

Vancouver:

Turčín J. Výroba rotační součásti na CNC multifunkčním centru: Production of Rotating Parts on a CNC Multifunctional Center. [Internet] [Thesis]. Brno University of Technology; 2019. [cited 2021 Mar 06]. Available from: http://hdl.handle.net/11012/40039.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Turčín J. Výroba rotační součásti na CNC multifunkčním centru: Production of Rotating Parts on a CNC Multifunctional Center. [Thesis]. Brno University of Technology; 2019. Available from: http://hdl.handle.net/11012/40039

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

13. Kopecký, Štěpán. Vyhodnocení CNC stroje versus konvenční stroj ve firmě: Evaluation of CNC Machines versus Conventional Machine in Condition Company.

Degree: 2019, Brno University of Technology

URL: http://hdl.handle.net/11012/60314

► Bachelor thesis describes analysis of CNC machine in company. The analysis of CNC machine focus on economical benefits and compare CNC machine with conventional technology.… (more)

Subjects/Keywords: CNC stroje; CNC a konvenční metody; konvenční stroje; iTNC 530; nástroj; CNC fréza; CNC machines; CNC and conventional methods; conventional machines; iTNC 530; tool; CNC milling

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Kopecký, �. (2019). Vyhodnocení CNC stroje versus konvenční stroj ve firmě: Evaluation of CNC Machines versus Conventional Machine in Condition Company. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/60314

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Kopecký, Štěpán. “Vyhodnocení CNC stroje versus konvenční stroj ve firmě: Evaluation of CNC Machines versus Conventional Machine in Condition Company.” 2019. Thesis, Brno University of Technology. Accessed March 06, 2021. http://hdl.handle.net/11012/60314.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Kopecký, Štěpán. “Vyhodnocení CNC stroje versus konvenční stroj ve firmě: Evaluation of CNC Machines versus Conventional Machine in Condition Company.” 2019. Web. 06 Mar 2021.

Vancouver:

Kopecký �. Vyhodnocení CNC stroje versus konvenční stroj ve firmě: Evaluation of CNC Machines versus Conventional Machine in Condition Company. [Internet] [Thesis]. Brno University of Technology; 2019. [cited 2021 Mar 06]. Available from: http://hdl.handle.net/11012/60314.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Kopecký �. Vyhodnocení CNC stroje versus konvenční stroj ve firmě: Evaluation of CNC Machines versus Conventional Machine in Condition Company. [Thesis]. Brno University of Technology; 2019. Available from: http://hdl.handle.net/11012/60314

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

14. Večeř, Petr. Konstrukční návrh malé modelářské CNC frézky: Design of small hobby CNC milling machine.

Degree: 2019, Brno University of Technology

URL: http://hdl.handle.net/11012/60793

► This thesis deals with the structural design of small model CNC milling machines. The work includes research modeller CNC milling machines available primarily on the… (more)

Subjects/Keywords: CNC frézka; modelářská CNC frézka; portálová frézka; konstrukce CNC frézky; CNC milling machine; modeller CNC milling machine; gantry milling machine; construction of CNC milling machine

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Večeř, P. (2019). Konstrukční návrh malé modelářské CNC frézky: Design of small hobby CNC milling machine. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/60793

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Večeř, Petr. “Konstrukční návrh malé modelářské CNC frézky: Design of small hobby CNC milling machine.” 2019. Thesis, Brno University of Technology. Accessed March 06, 2021. http://hdl.handle.net/11012/60793.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Večeř, Petr. “Konstrukční návrh malé modelářské CNC frézky: Design of small hobby CNC milling machine.” 2019. Web. 06 Mar 2021.

Vancouver:

Večeř P. Konstrukční návrh malé modelářské CNC frézky: Design of small hobby CNC milling machine. [Internet] [Thesis]. Brno University of Technology; 2019. [cited 2021 Mar 06]. Available from: http://hdl.handle.net/11012/60793.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Večeř P. Konstrukční návrh malé modelářské CNC frézky: Design of small hobby CNC milling machine. [Thesis]. Brno University of Technology; 2019. Available from: http://hdl.handle.net/11012/60793

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

University of Waterloo

15. Panchal, Prachi. Utilization of Biorenewable Polymers for Functional Applications.

Degree: 2020, University of Waterloo

URL: http://hdl.handle.net/10012/15806

► The need to transition to more sustainable and renewable technology has resulted in a focus on the two bio-renewable polymers, cellulose and lignin. Cellulose nanocrystals… (more)

▼ The need to transition to more sustainable and renewable technology has resulted in a focus on the two bio-renewable polymers, cellulose and lignin. Cellulose nanocrystals (CNCs) and lignin can be the materials of the future, with the potential of replacing currently used synthetic materials. CNCs are naturally hydrophilic due to the abundance of hydroxyl (-OH) groups on their surface, making them an excellent recipient for functional composite materials. However, their hydrophilicity is a deterrent to many industries, subsequently limiting their application scope. In either light, the increased rate of progress using CNCs in advanced material applications is well underway and is becoming applicable on an industrial scale. Lignin, a biopolymer found in biosphere, is a by-product of pulp industries. Due to its chemical structure, it can be used as a UV- stabilizer, antioxidant, antiradical, and antimicrobial biopolymer in material applications. However, because of its complexity in structure and inconsistencies in properties associated with differences in the source and extraction process, the use of lignin in specialty materials is limited. Nanoparticles of renewable polymers have gained an interest in academia due to the advantageous properties they offer. Thus, the synthesis of lignin nanoparticles can be of relevance. Epoxy is an extensively used polymer in several applications such as coatings, adhesives, structural composites, etc. However, it is a poor ultraviolet (UV) absorber and suffers from UV- degradation, which usually leads to discolouration and loss of structural integrity. In this study, cellulose nanocrystals (CNCs) conjugated with UV absorber molecules were investigated as a functional nanomaterial to enhance the UV absorption of epoxy polymers. The grafting of a UV absorbing molecule, para-aminobenzoic acid (PABA), on the surface of CNC was confirmed using FTIR, proton NMR, and via elemental analysis. The modified CNC was then incorporated into an epoxy polymer and its efficacy in mitigating the photo-degradation of epoxy was evaluated. The incorporation of native CNC displayed some UV absorption and reduction in the UV mediated discolouration of the epoxy, but the most pronounced effect was obtained in PABA decorated CNC based epoxy nano-composites. The use of such tailored CNCs has great potential to mitigate the UV induced degradation of a range of polymers that are used especially in outdoor applications where direct exposure to UV is significant. Lignin, an aromatic, renewable, and biodegradable material offers many unique properties. The potential of lignin can be valorized with the synthesis of nanoparticles. In this study, lignin (Dealkaline lignin) was used to produce lignin nanoparticles (LNP) through top-down and bottom- up processes. LNPs produced through a top-down process used ultrasonication as the source of energy to break down the larger molecule. A shift in pH was used inthe bottom-up approach, where LNPs were synthesized in three different solvents: water, glycerol, and ethylene…

Subjects/Keywords: CNC; lignin; uv absorber; epoxy

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Panchal, P. (2020). Utilization of Biorenewable Polymers for Functional Applications. (Thesis). University of Waterloo. Retrieved from http://hdl.handle.net/10012/15806

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Panchal, Prachi. “Utilization of Biorenewable Polymers for Functional Applications.” 2020. Thesis, University of Waterloo. Accessed March 06, 2021. http://hdl.handle.net/10012/15806.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Panchal, Prachi. “Utilization of Biorenewable Polymers for Functional Applications.” 2020. Web. 06 Mar 2021.

Vancouver:

Panchal P. Utilization of Biorenewable Polymers for Functional Applications. [Internet] [Thesis]. University of Waterloo; 2020. [cited 2021 Mar 06]. Available from: http://hdl.handle.net/10012/15806.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Panchal P. Utilization of Biorenewable Polymers for Functional Applications. [Thesis]. University of Waterloo; 2020. Available from: http://hdl.handle.net/10012/15806

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

16. Areias, Flávia Martins. Departamento financeiro: passagem do POCAL para o SNC-AP.

Degree: 2018, Universidade de Trás-os-Montes e Alto Douro

URL: https://www.rcaap.pt/detail.jsp?id=oai:repositorio.utad.pt:10348/8677

►

O presente relatório tem como objetivo dar a conhecer a nossa prática e método de trabalho, realizados no âmbito do Mestrado em Ciências Económicas e… (more)

Subjects/Keywords: POCAL; SNC-AP; CIBE; CNC

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Areias, F. M. (2018). Departamento financeiro: passagem do POCAL para o SNC-AP. (Thesis). Universidade de Trás-os-Montes e Alto Douro. Retrieved from https://www.rcaap.pt/detail.jsp?id=oai:repositorio.utad.pt:10348/8677

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Areias, Flávia Martins. “Departamento financeiro: passagem do POCAL para o SNC-AP.” 2018. Thesis, Universidade de Trás-os-Montes e Alto Douro. Accessed March 06, 2021. https://www.rcaap.pt/detail.jsp?id=oai:repositorio.utad.pt:10348/8677.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Areias, Flávia Martins. “Departamento financeiro: passagem do POCAL para o SNC-AP.” 2018. Web. 06 Mar 2021.

Vancouver:

Areias FM. Departamento financeiro: passagem do POCAL para o SNC-AP. [Internet] [Thesis]. Universidade de Trás-os-Montes e Alto Douro; 2018. [cited 2021 Mar 06]. Available from: https://www.rcaap.pt/detail.jsp?id=oai:repositorio.utad.pt:10348/8677.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Areias FM. Departamento financeiro: passagem do POCAL para o SNC-AP. [Thesis]. Universidade de Trás-os-Montes e Alto Douro; 2018. Available from: https://www.rcaap.pt/detail.jsp?id=oai:repositorio.utad.pt:10348/8677

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Universidade Nova

17. Vindima, Tomé Alexandre Gomes. Melhoria da qualidade e da produtividade na indústria de transformação de mármores.

Degree: 2009, Universidade Nova

URL: http://www.rcaap.pt/detail.jsp?id=oai:run.unl.pt:10362/5074

►

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para obtenção do grau de Mestre em Engenharia e Gestão Industrial

A… (more)

Subjects/Keywords: Sistemas de certificação; Tecnologia CNC

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Vindima, T. A. G. (2009). Melhoria da qualidade e da produtividade na indústria de transformação de mármores. (Thesis). Universidade Nova. Retrieved from http://www.rcaap.pt/detail.jsp?id=oai:run.unl.pt:10362/5074

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Vindima, Tomé Alexandre Gomes. “Melhoria da qualidade e da produtividade na indústria de transformação de mármores.” 2009. Thesis, Universidade Nova. Accessed March 06, 2021. http://www.rcaap.pt/detail.jsp?id=oai:run.unl.pt:10362/5074.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Vindima, Tomé Alexandre Gomes. “Melhoria da qualidade e da produtividade na indústria de transformação de mármores.” 2009. Web. 06 Mar 2021.

Vancouver:

Vindima TAG. Melhoria da qualidade e da produtividade na indústria de transformação de mármores. [Internet] [Thesis]. Universidade Nova; 2009. [cited 2021 Mar 06]. Available from: http://www.rcaap.pt/detail.jsp?id=oai:run.unl.pt:10362/5074.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Vindima TAG. Melhoria da qualidade e da produtividade na indústria de transformação de mármores. [Thesis]. Universidade Nova; 2009. Available from: http://www.rcaap.pt/detail.jsp?id=oai:run.unl.pt:10362/5074

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

University of Debrecen

18. Gombkötő, Csaba. ABB robottal való CNC megmunkáló központ kiszolgálása .

Degree: DE – TEK – Természettudományi és Technológiai Kar – Fizikai Intézet, 2012, University of Debrecen

URL: http://hdl.handle.net/2437/153210

A dolgozatban az ipari robot és a CNC megmunkáló feladatai, illetve azok fejlesztései kerülnek bemutatásra. Továbbá a hozzátartozó érzékelő rendszerről, annak kiépítéséről is beszámol a dolgozat. Advisors/Committee Members: Misák, Sándor (advisor).

Subjects/Keywords: robot; CNC megmunkáló központ

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Gombkötő, C. (2012). ABB robottal való CNC megmunkáló központ kiszolgálása . (Thesis). University of Debrecen. Retrieved from http://hdl.handle.net/2437/153210

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Gombkötő, Csaba. “ABB robottal való CNC megmunkáló központ kiszolgálása .” 2012. Thesis, University of Debrecen. Accessed March 06, 2021. http://hdl.handle.net/2437/153210.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Gombkötő, Csaba. “ABB robottal való CNC megmunkáló központ kiszolgálása .” 2012. Web. 06 Mar 2021.

Vancouver:

Gombkötő C. ABB robottal való CNC megmunkáló központ kiszolgálása . [Internet] [Thesis]. University of Debrecen; 2012. [cited 2021 Mar 06]. Available from: http://hdl.handle.net/2437/153210.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Gombkötő C. ABB robottal való CNC megmunkáló központ kiszolgálása . [Thesis]. University of Debrecen; 2012. Available from: http://hdl.handle.net/2437/153210

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Halmstad University

19. Eriksson, Filip. EasyMill - En kompakt CNC-fräs för träskivor.

Degree: Business and Engineering (SET), 2013, Halmstad University

URL: http://urn.kb.se/resolve?urn=urn:nbn:se:hh:diva-25146

This report is a thesis for the Technicians in Computer Aided Design program at Halmstad University. The group has developed a milling machine mainly used for fiber boards, on behalf of Johan Wretborn.

Subjects/Keywords: cnc fräs cad produktutveckling

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Eriksson, F. (2013). EasyMill - En kompakt CNC-fräs för träskivor. (Thesis). Halmstad University. Retrieved from http://urn.kb.se/resolve?urn=urn:nbn:se:hh:diva-25146

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Eriksson, Filip. “EasyMill - En kompakt CNC-fräs för träskivor.” 2013. Thesis, Halmstad University. Accessed March 06, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:hh:diva-25146.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Eriksson, Filip. “EasyMill - En kompakt CNC-fräs för träskivor.” 2013. Web. 06 Mar 2021.

Vancouver:

Eriksson F. EasyMill - En kompakt CNC-fräs för träskivor. [Internet] [Thesis]. Halmstad University; 2013. [cited 2021 Mar 06]. Available from: http://urn.kb.se/resolve?urn=urn:nbn:se:hh:diva-25146.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Eriksson F. EasyMill - En kompakt CNC-fräs för träskivor. [Thesis]. Halmstad University; 2013. Available from: http://urn.kb.se/resolve?urn=urn:nbn:se:hh:diva-25146

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Delft University of Technology

20. Polski, M.G. (author). Almere Pampus Transferium.

Degree: 2013, Delft University of Technology

URL: http://resolver.tudelft.nl/uuid:81361cbd-81ab-410d-b69b-f37e292e5573

► Reflection on open-ended and metastable architecture. Metastability is a term which describes the extended duration of certain equilibria acquired by a complex system when leaving… (more)

▼ Reflection on open-ended and metastable architecture. Metastability is a term which describes the extended duration of certain equilibria acquired by a complex system when leaving its most stable state after an external action. The parameters of such "excited" system may eventually reach and hold stationary values (a metastable state) but then, after a long time, (spontaneously or under a slight external action) parameters will start changing again. Considering the contemporary technological level and multiple scientific insights into natural systems that reflects similar tendencies, it is not hard to imagine an open ended architectural design that across its life span reveals metastable qualities. Even the most sophisticated building, designed in reference to a particular environment, is not permanently suitable. First of all, due to the impact of the building on its environment, for which it was initially designed. Second, due to an unpredictable and dynamic field of external stimuli that might trigger changes in the environment. In both cases, a solution that seemed to be suitable for environmental embodiment, turn out to be a more or less accurate experiment, that has no embedded capability to facilitate environmental feedback for the means of its adjustment. Creating fixed built environment solutions, that do not incorporate feedback into building evolution across its live span, can be literally compared with creating a house with fixed glazing, without the possibility to control the air flow throughout the building. Informational system developed for Almere Pampus Transferium assumes the absence of permanent stasis and operate onto metastable frames. An associated research incorporates computational mechanisms inspired by natural form emergence and evolution, not only in the design process, but also in its execution and evolution. Those mechanisms, while inspired by nature, do not necessary mimic its aesthetics. Their value is rather in providing effective and adjustable embodiments, whose emergence can be directly linked with the environment, initiating a mutual and continuous self-regulating feedback loop. The application of developed informational systems in an architectural design goes in parallel with embodiments capable of handling fluctuating data flows. Parametric structural system used in a building is a the same time modular and customised, which means that within its parametrical boundaries new extensions of the building required in time, can be automatically adjusted to current conditions and connected with the existing parts of the building. Even more flexibility along buildings life span is provided by double skin system. Main structure of the building is covered with single glazed facade that provides condition for functionalities where precise climate control is not required. Internal volumes, at the other hand, placed inside the main structural frames, provides advanced climate control for all sorts of potential activities. At the level where big and open spaces, created by main structural… Advisors/Committee Members: Biloria, N. (mentor), Bier, H. (mentor), Sobota, M. (mentor).

Subjects/Keywords: hyperbody; transferium; metastable; CNC; parametric

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Polski, M. G. (. (2013). Almere Pampus Transferium. (Masters Thesis). Delft University of Technology. Retrieved from http://resolver.tudelft.nl/uuid:81361cbd-81ab-410d-b69b-f37e292e5573

Chicago Manual of Style (16^th Edition):

Polski, M G (author). “Almere Pampus Transferium.” 2013. Masters Thesis, Delft University of Technology. Accessed March 06, 2021. http://resolver.tudelft.nl/uuid:81361cbd-81ab-410d-b69b-f37e292e5573.

MLA Handbook (7^th Edition):

Polski, M G (author). “Almere Pampus Transferium.” 2013. Web. 06 Mar 2021.

Vancouver:

Polski MG(. Almere Pampus Transferium. [Internet] [Masters thesis]. Delft University of Technology; 2013. [cited 2021 Mar 06]. Available from: http://resolver.tudelft.nl/uuid:81361cbd-81ab-410d-b69b-f37e292e5573.

Council of Science Editors:

Polski MG(. Almere Pampus Transferium. [Masters Thesis]. Delft University of Technology; 2013. Available from: http://resolver.tudelft.nl/uuid:81361cbd-81ab-410d-b69b-f37e292e5573

University of Melbourne

21. Ashley, Philip Neil. Innovative use of CNC technology for the manufacture of furniture in batch size of one.

Degree: 2016, University of Melbourne

URL: http://hdl.handle.net/11343/118610

► While the adoption of CNC technologies in Australia has been rapid by World standards, the successful integration of machines and systems into the Australian solid… (more)

▼ While the adoption of CNC technologies in Australia has been rapid by World standards, the successful integration of machines and systems into the Australian solid timber furniture factory has been harder to achieve. This dissertation aims to assess elements of the furniture manufacturing process using CNC equipment to identify best practice and lean manufacturing solutions. Small batch sizes suitable for flexible manufacturing are the goal of every manufacturer; however variations in part design, order quantities, delivery deadlines and setup times make actual batch size calculations difficult to define. This study will assess methods that could be used to reduce batch sizes; in particular the viability of combining all of the components for one piece of furniture into a single CNC program. A number of examples will be presented and the advantages and disadvantages to small batch sizes evaluated and discussed. CNC machinery, cutting tools, tool holding devices and emerging technology will be assessed for performance and suitability for lean manufacturing and small batch sizes. Practical methods to improve production efficiency by organizing workflow and re-thinking how components are processed will be demonstrated. This work concludes that there is no commercial gain in combining all of the parts of a piece of furniture in the one CNC program. It (rather) finds that utilizing appropriate cutting tools and smart processes will bring about gains in productivity that is currently unrealized. It finds that the capability exists within the current performance of CAD and CNC processing to reduce setup and machining times further than are presently achieved in the Australian furniture industry. It finds that training does not adequately provide industry with the skilled workers required and it finds that industry does not always purchase machinery suitable for small batch sizes or for processing the variety of materials used in Australian furniture manufacture. The major findings were that for the processing of kitchen cabinets; a nested manufacturing solution delivered the most benefits for small batch-size production. Rail machines are recommended for small batch sizes of furniture using predominantly solid wood. The smallest batch size is not always the best batch size. It was determined that in the case of a small batch processing multiple parts in the same cycle with a jig in solid wood; there is no saving in time. The use of high-performance tools is highly recommended in order to take advantage of lessened runout, quick-change tool systems and stacked tooling. Applying the tool in a “power feed” direction may not always be the most ideal in terms of breakout; tool life and power consumption. More efficient ways of processing parts are available to the manufacturer and this was demonstrated by combining common parts into one processing cycle. The layout of the furniture factory has a direct effect on the material flow and productivity. The range of issues identified in Mo et al. (2001) can be improved with…

Subjects/Keywords: CNC; furniture; batch size; manufacture

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Ashley, P. N. (2016). Innovative use of CNC technology for the manufacture of furniture in batch size of one. (Masters Thesis). University of Melbourne. Retrieved from http://hdl.handle.net/11343/118610

Chicago Manual of Style (16^th Edition):

Ashley, Philip Neil. “Innovative use of CNC technology for the manufacture of furniture in batch size of one.” 2016. Masters Thesis, University of Melbourne. Accessed March 06, 2021. http://hdl.handle.net/11343/118610.

MLA Handbook (7^th Edition):

Ashley, Philip Neil. “Innovative use of CNC technology for the manufacture of furniture in batch size of one.” 2016. Web. 06 Mar 2021.

Vancouver:

Ashley PN. Innovative use of CNC technology for the manufacture of furniture in batch size of one. [Internet] [Masters thesis]. University of Melbourne; 2016. [cited 2021 Mar 06]. Available from: http://hdl.handle.net/11343/118610.

Council of Science Editors:

Ashley PN. Innovative use of CNC technology for the manufacture of furniture in batch size of one. [Masters Thesis]. University of Melbourne; 2016. Available from: http://hdl.handle.net/11343/118610

Brno University of Technology

22. Blažek, Martin. CNC technologie obrábění: CNC cutting technology.

Degree: 2019, Brno University of Technology

URL: http://hdl.handle.net/11012/33606

This is a bachelor`s thesis concerning technological characteristics of cutting machines and CNC programing of lathes. Discusses the posibility of manufacturing assign shaft. Advisors/Committee Members: Prokop, Jaroslav (advisor), Kalivoda, Milan (referee).

Subjects/Keywords: CNC obráběcí stroje; programování CNC soustruhů; hřídel; technologický postup; CNC machines; CNC programing of lathes; shaft; technological process

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Blažek, M. (2019). CNC technologie obrábění: CNC cutting technology. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/33606

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Blažek, Martin. “CNC technologie obrábění: CNC cutting technology.” 2019. Thesis, Brno University of Technology. Accessed March 06, 2021. http://hdl.handle.net/11012/33606.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Blažek, Martin. “CNC technologie obrábění: CNC cutting technology.” 2019. Web. 06 Mar 2021.

Vancouver:

Blažek M. CNC technologie obrábění: CNC cutting technology. [Internet] [Thesis]. Brno University of Technology; 2019. [cited 2021 Mar 06]. Available from: http://hdl.handle.net/11012/33606.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Blažek M. CNC technologie obrábění: CNC cutting technology. [Thesis]. Brno University of Technology; 2019. Available from: http://hdl.handle.net/11012/33606

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

23. Škrabálek, Petr. Návrh CNC technologie součásti "hřídel": Design CNC Technology Components Shaft.

Degree: 2019, Brno University of Technology

URL: http://hdl.handle.net/11012/40321

► This thesis deals with the technological process of producing welded shaft in company STT Servis, s.r.o. The work is addressed the technological possibilities and production… (more)

Subjects/Keywords: výroba; hřídel; CNC obrábění; CNC soustruh; kvalita; přesnost; production; shaft; CNC machining; CNC lathe; quality; accuracy

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Škrabálek, P. (2019). Návrh CNC technologie součásti "hřídel": Design CNC Technology Components Shaft. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/40321

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Škrabálek, Petr. “Návrh CNC technologie součásti "hřídel": Design CNC Technology Components Shaft.” 2019. Thesis, Brno University of Technology. Accessed March 06, 2021. http://hdl.handle.net/11012/40321.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Škrabálek, Petr. “Návrh CNC technologie součásti "hřídel": Design CNC Technology Components Shaft.” 2019. Web. 06 Mar 2021.

Vancouver:

Škrabálek P. Návrh CNC technologie součásti "hřídel": Design CNC Technology Components Shaft. [Internet] [Thesis]. Brno University of Technology; 2019. [cited 2021 Mar 06]. Available from: http://hdl.handle.net/11012/40321.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Škrabálek P. Návrh CNC technologie součásti "hřídel": Design CNC Technology Components Shaft. [Thesis]. Brno University of Technology; 2019. Available from: http://hdl.handle.net/11012/40321

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

24. Sádlo, Dominik. Zefektivnění technologie výroby zadaného pouzdra pastorku: Streamlining production technology for specified pinion housing.

Degree: 2018, Brno University of Technology

URL: http://hdl.handle.net/11012/82455

► The aim of the thesis is to propose a new technology for the production of the specified pinion case and to compare it with the… (more)

Subjects/Keywords: CNC obrábění; soustružení; frézování; pouzdro; nástroje pro CNC obrábění; CNC machining; turning; milling; housing; tools for CNC machining

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Sádlo, D. (2018). Zefektivnění technologie výroby zadaného pouzdra pastorku: Streamlining production technology for specified pinion housing. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/82455

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Sádlo, Dominik. “Zefektivnění technologie výroby zadaného pouzdra pastorku: Streamlining production technology for specified pinion housing.” 2018. Thesis, Brno University of Technology. Accessed March 06, 2021. http://hdl.handle.net/11012/82455.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Sádlo, Dominik. “Zefektivnění technologie výroby zadaného pouzdra pastorku: Streamlining production technology for specified pinion housing.” 2018. Web. 06 Mar 2021.

Vancouver:

Sádlo D. Zefektivnění technologie výroby zadaného pouzdra pastorku: Streamlining production technology for specified pinion housing. [Internet] [Thesis]. Brno University of Technology; 2018. [cited 2021 Mar 06]. Available from: http://hdl.handle.net/11012/82455.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Sádlo D. Zefektivnění technologie výroby zadaného pouzdra pastorku: Streamlining production technology for specified pinion housing. [Thesis]. Brno University of Technology; 2018. Available from: http://hdl.handle.net/11012/82455

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

25. Cherepanov, Maksym. Ruční programovaní CNC strojů: Manual programming of CNC machines.

Degree: 2019, Brno University of Technology

URL: http://hdl.handle.net/11012/65871

► This diploma work reflects the basic principles of CNC machines manual programming, its advantages and disadvantages, as well as automation capabilities. The next target of… (more)

Subjects/Keywords: CNC obrábění; ruční programovaní CNC strojů; ISO kód.; CNC Machining; manual programming of CNC Machines; ISO Code.

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Cherepanov, M. (2019). Ruční programovaní CNC strojů: Manual programming of CNC machines. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/65871

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Cherepanov, Maksym. “Ruční programovaní CNC strojů: Manual programming of CNC machines.” 2019. Thesis, Brno University of Technology. Accessed March 06, 2021. http://hdl.handle.net/11012/65871.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Cherepanov, Maksym. “Ruční programovaní CNC strojů: Manual programming of CNC machines.” 2019. Web. 06 Mar 2021.

Vancouver:

Cherepanov M. Ruční programovaní CNC strojů: Manual programming of CNC machines. [Internet] [Thesis]. Brno University of Technology; 2019. [cited 2021 Mar 06]. Available from: http://hdl.handle.net/11012/65871.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Cherepanov M. Ruční programovaní CNC strojů: Manual programming of CNC machines. [Thesis]. Brno University of Technology; 2019. Available from: http://hdl.handle.net/11012/65871

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

26. Štěpánek, Vojtěch. Návrh a konstrukce hobby frézky: Design and construction hobby milling machine.

Degree: 2019, Brno University of Technology

URL: http://hdl.handle.net/11012/60229

► This work deals with comparing CNC machines. It compares components used in small hobby machines with components of large commercial machines. The work also focused… (more)

Subjects/Keywords: Frézka; frézování; CNC; krokový motor; vřeteno; CNC řízení; Milling machine; milling; CNC; stepper motor; spindle; CNC control

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Štěpánek, V. (2019). Návrh a konstrukce hobby frézky: Design and construction hobby milling machine. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/60229

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Štěpánek, Vojtěch. “Návrh a konstrukce hobby frézky: Design and construction hobby milling machine.” 2019. Thesis, Brno University of Technology. Accessed March 06, 2021. http://hdl.handle.net/11012/60229.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Štěpánek, Vojtěch. “Návrh a konstrukce hobby frézky: Design and construction hobby milling machine.” 2019. Web. 06 Mar 2021.

Vancouver:

Štěpánek V. Návrh a konstrukce hobby frézky: Design and construction hobby milling machine. [Internet] [Thesis]. Brno University of Technology; 2019. [cited 2021 Mar 06]. Available from: http://hdl.handle.net/11012/60229.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Štěpánek V. Návrh a konstrukce hobby frézky: Design and construction hobby milling machine. [Thesis]. Brno University of Technology; 2019. Available from: http://hdl.handle.net/11012/60229

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

27. Hejsek, Milan. Možnosti systému Heidenhain iTNC 530 při programování obráběcích strojů: Heidenhain iTNC 530 tools for NC programming of machines.

Degree: 2018, Brno University of Technology

URL: http://hdl.handle.net/11012/14177

Short description possibilities control system Heidenhain iTNC530 and machine FV 25 CNC A. Detailed analysis factors single programming function for better action machining on this machina. Advisors/Committee Members: Polzer, Aleš (advisor), Dvořáček, Jan (referee).

Subjects/Keywords: CNC; Heidenhain; iTNC 530; FV 25 CNC A; CNC; Heidenhain; iTNC 530; FV 25 CNC A

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Hejsek, M. (2018). Možnosti systému Heidenhain iTNC 530 při programování obráběcích strojů: Heidenhain iTNC 530 tools for NC programming of machines. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/14177

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Hejsek, Milan. “Možnosti systému Heidenhain iTNC 530 při programování obráběcích strojů: Heidenhain iTNC 530 tools for NC programming of machines.” 2018. Thesis, Brno University of Technology. Accessed March 06, 2021. http://hdl.handle.net/11012/14177.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Hejsek, Milan. “Možnosti systému Heidenhain iTNC 530 při programování obráběcích strojů: Heidenhain iTNC 530 tools for NC programming of machines.” 2018. Web. 06 Mar 2021.

Vancouver:

Hejsek M. Možnosti systému Heidenhain iTNC 530 při programování obráběcích strojů: Heidenhain iTNC 530 tools for NC programming of machines. [Internet] [Thesis]. Brno University of Technology; 2018. [cited 2021 Mar 06]. Available from: http://hdl.handle.net/11012/14177.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Hejsek M. Možnosti systému Heidenhain iTNC 530 při programování obráběcích strojů: Heidenhain iTNC 530 tools for NC programming of machines. [Thesis]. Brno University of Technology; 2018. Available from: http://hdl.handle.net/11012/14177

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

28. Trčka, Vojtěch. Aplikace CAD/CAM softwaru EdgeCAM při obrábění: Application CAD/CAM software EdgeCAM for machining.

Degree: 2018, Brno University of Technology

URL: http://hdl.handle.net/11012/14616

► Bachelor thesis contains a summary of CAD / CAM software Edgecam, setting the post processor for use in manufacturing machine ZPS VMC 1060 with the… (more)

Subjects/Keywords: Edgecam; CAD/CAM; CNC obrábění; CNC program; DynaPath Delta; Edgecam; CAD/CAM; CNC machining; CNC program; DynaPath Delta

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Trčka, V. (2018). Aplikace CAD/CAM softwaru EdgeCAM při obrábění: Application CAD/CAM software EdgeCAM for machining. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/14616

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Trčka, Vojtěch. “Aplikace CAD/CAM softwaru EdgeCAM při obrábění: Application CAD/CAM software EdgeCAM for machining.” 2018. Thesis, Brno University of Technology. Accessed March 06, 2021. http://hdl.handle.net/11012/14616.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Trčka, Vojtěch. “Aplikace CAD/CAM softwaru EdgeCAM při obrábění: Application CAD/CAM software EdgeCAM for machining.” 2018. Web. 06 Mar 2021.

Vancouver:

Trčka V. Aplikace CAD/CAM softwaru EdgeCAM při obrábění: Application CAD/CAM software EdgeCAM for machining. [Internet] [Thesis]. Brno University of Technology; 2018. [cited 2021 Mar 06]. Available from: http://hdl.handle.net/11012/14616.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Trčka V. Aplikace CAD/CAM softwaru EdgeCAM při obrábění: Application CAD/CAM software EdgeCAM for machining. [Thesis]. Brno University of Technology; 2018. Available from: http://hdl.handle.net/11012/14616

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

29. Záveský, Zbyněk. Návrh nové technologie výroby vybrané součásti: A new technology of a machined part.

Degree: 2019, Brno University of Technology

URL: http://hdl.handle.net/11012/59544

► This master’s thesis is focused on CNC machines. It deals with the characteristics, description, coordinates, advantages and disadvantages of the CNC machines and utilization of… (more)

Subjects/Keywords: CNC stroje; výhody a nevýhody CNC strojů; frézování kapes.; CNC machines; advantage and disadvantage CNC machine; milling slots

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Záveský, Z. (2019). Návrh nové technologie výroby vybrané součásti: A new technology of a machined part. (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/59544

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Záveský, Zbyněk. “Návrh nové technologie výroby vybrané součásti: A new technology of a machined part.” 2019. Thesis, Brno University of Technology. Accessed March 06, 2021. http://hdl.handle.net/11012/59544.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Záveský, Zbyněk. “Návrh nové technologie výroby vybrané součásti: A new technology of a machined part.” 2019. Web. 06 Mar 2021.

Vancouver:

Záveský Z. Návrh nové technologie výroby vybrané součásti: A new technology of a machined part. [Internet] [Thesis]. Brno University of Technology; 2019. [cited 2021 Mar 06]. Available from: http://hdl.handle.net/11012/59544.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Záveský Z. Návrh nové technologie výroby vybrané součásti: A new technology of a machined part. [Thesis]. Brno University of Technology; 2019. Available from: http://hdl.handle.net/11012/59544

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Georgia Tech

30. Miller, Mark Frazer. Nanocellulose reinforced sheet molding compound for automotive composite manufacturing.

Degree: MS, Mechanical Engineering, 2016, Georgia Tech

URL: http://hdl.handle.net/1853/55602

► The focus of this research is to investigate the potential of cellulose nanocrystals (CNC) as reinforcement in typical glass fiber/epoxy sheet molding compounds (SMC). The… (more)

Subjects/Keywords: Nanocellulose; CNC; SMC; PMC

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Miller, M. F. (2016). Nanocellulose reinforced sheet molding compound for automotive composite manufacturing. (Masters Thesis). Georgia Tech. Retrieved from http://hdl.handle.net/1853/55602

Chicago Manual of Style (16^th Edition):

Miller, Mark Frazer. “Nanocellulose reinforced sheet molding compound for automotive composite manufacturing.” 2016. Masters Thesis, Georgia Tech. Accessed March 06, 2021. http://hdl.handle.net/1853/55602.

MLA Handbook (7^th Edition):

Miller, Mark Frazer. “Nanocellulose reinforced sheet molding compound for automotive composite manufacturing.” 2016. Web. 06 Mar 2021.

Vancouver:

Miller MF. Nanocellulose reinforced sheet molding compound for automotive composite manufacturing. [Internet] [Masters thesis]. Georgia Tech; 2016. [cited 2021 Mar 06]. Available from: http://hdl.handle.net/1853/55602.

Council of Science Editors:

Miller MF. Nanocellulose reinforced sheet molding compound for automotive composite manufacturing. [Masters Thesis]. Georgia Tech; 2016. Available from: http://hdl.handle.net/1853/55602

		in
And / Or
		in
And / Or
		in
And / Or
		in

Open Access Theses and Dissertations