Advanced search options

Advanced Search Options 🞨

Browse by author name (“Author name starts with…”).

Find ETDs with:

in
/  
in
/  
in
/  
in

Written in Published in Earliest date Latest date

Sorted by

Results per page:

Sorted by: relevance · author · university · dateNew search

You searched for subject:(Bulk modulus). Showing records 1 – 29 of 29 total matches.

Search Limiters

Last 2 Years | English Only

No search limiters apply to these results.

▼ Search Limiters


Penn State University

1. Schwartz, Brandon. THE EFFECT OF THERMAL CYCLING ON THE PERMEABILITY AND MECHANICAL PROPERTIES OF SHALE.

Degree: MS, Energy and Mineral Engineering, 2016, Penn State University

 The feasibility and rate of recovery of natural gas from tight shale formations is controlled by matrix permeability and flow path length to the closest… (more)

Subjects/Keywords: Permeability; Bulk Modulus; Shale; Thermal Cycling

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Schwartz, B. (2016). THE EFFECT OF THERMAL CYCLING ON THE PERMEABILITY AND MECHANICAL PROPERTIES OF SHALE. (Masters Thesis). Penn State University. Retrieved from https://etda.libraries.psu.edu/catalog/13508bos5313

Chicago Manual of Style (16th Edition):

Schwartz, Brandon. “THE EFFECT OF THERMAL CYCLING ON THE PERMEABILITY AND MECHANICAL PROPERTIES OF SHALE.” 2016. Masters Thesis, Penn State University. Accessed August 06, 2020. https://etda.libraries.psu.edu/catalog/13508bos5313.

MLA Handbook (7th Edition):

Schwartz, Brandon. “THE EFFECT OF THERMAL CYCLING ON THE PERMEABILITY AND MECHANICAL PROPERTIES OF SHALE.” 2016. Web. 06 Aug 2020.

Vancouver:

Schwartz B. THE EFFECT OF THERMAL CYCLING ON THE PERMEABILITY AND MECHANICAL PROPERTIES OF SHALE. [Internet] [Masters thesis]. Penn State University; 2016. [cited 2020 Aug 06]. Available from: https://etda.libraries.psu.edu/catalog/13508bos5313.

Council of Science Editors:

Schwartz B. THE EFFECT OF THERMAL CYCLING ON THE PERMEABILITY AND MECHANICAL PROPERTIES OF SHALE. [Masters Thesis]. Penn State University; 2016. Available from: https://etda.libraries.psu.edu/catalog/13508bos5313


University of Alberta

2. Bakhorji, Aiman M. Laboratory measurements of static and dynamic elastic properties in carbonate.

Degree: PhD, Department of Physics, 2010, University of Alberta

 The fact that many of the giant hydrocarbon reservoirs, such as the Ghawar field in Saudi Arabia and the Grosmont formation in Alberta, are formed… (more)

Subjects/Keywords: Shear modulus; Carbonate; Elastic properties; Ultrasonic velocity; Bulk modulus

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Bakhorji, A. M. (2010). Laboratory measurements of static and dynamic elastic properties in carbonate. (Doctoral Dissertation). University of Alberta. Retrieved from https://era.library.ualberta.ca/files/v118rf203

Chicago Manual of Style (16th Edition):

Bakhorji, Aiman M. “Laboratory measurements of static and dynamic elastic properties in carbonate.” 2010. Doctoral Dissertation, University of Alberta. Accessed August 06, 2020. https://era.library.ualberta.ca/files/v118rf203.

MLA Handbook (7th Edition):

Bakhorji, Aiman M. “Laboratory measurements of static and dynamic elastic properties in carbonate.” 2010. Web. 06 Aug 2020.

Vancouver:

Bakhorji AM. Laboratory measurements of static and dynamic elastic properties in carbonate. [Internet] [Doctoral dissertation]. University of Alberta; 2010. [cited 2020 Aug 06]. Available from: https://era.library.ualberta.ca/files/v118rf203.

Council of Science Editors:

Bakhorji AM. Laboratory measurements of static and dynamic elastic properties in carbonate. [Doctoral Dissertation]. University of Alberta; 2010. Available from: https://era.library.ualberta.ca/files/v118rf203


NSYSU

3. Feng, Yu-ting. The investigation of mechanical properties of ZrCu/Zr/ZrCu amorphousï¼crystallineãnanolaminates with inclined interface by molecular statics simulation.

Degree: Master, Mechanical and Electro-Mechanical Engineering, 2012, NSYSU

 In this study, the mechanical properties of Cu-Zr binary bulk metallic glasses (BMG) were investigated at the nano-scale. The stable amorphous structures and corresponding energies… (more)

Subjects/Keywords: DFT; Cu-Zr BMGs; TFMGs; Molecular Static; Poisson ratio; Young's modulus; fitting; Bulk modulus; Shear modulus

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Feng, Y. (2012). The investigation of mechanical properties of ZrCu/Zr/ZrCu amorphousï¼crystallineãnanolaminates with inclined interface by molecular statics simulation. (Thesis). NSYSU. Retrieved from http://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0723112-131954

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16th Edition):

Feng, Yu-ting. “The investigation of mechanical properties of ZrCu/Zr/ZrCu amorphousï¼crystallineãnanolaminates with inclined interface by molecular statics simulation.” 2012. Thesis, NSYSU. Accessed August 06, 2020. http://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0723112-131954.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7th Edition):

Feng, Yu-ting. “The investigation of mechanical properties of ZrCu/Zr/ZrCu amorphousï¼crystallineãnanolaminates with inclined interface by molecular statics simulation.” 2012. Web. 06 Aug 2020.

Vancouver:

Feng Y. The investigation of mechanical properties of ZrCu/Zr/ZrCu amorphousï¼crystallineãnanolaminates with inclined interface by molecular statics simulation. [Internet] [Thesis]. NSYSU; 2012. [cited 2020 Aug 06]. Available from: http://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0723112-131954.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Feng Y. The investigation of mechanical properties of ZrCu/Zr/ZrCu amorphousï¼crystallineãnanolaminates with inclined interface by molecular statics simulation. [Thesis]. NSYSU; 2012. Available from: http://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0723112-131954

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation


RMIT University

4. Radman, A. Bi-directional evolutionary structural optimization (BESO) for topology optimization of material’s microstructure.

Degree: 2013, RMIT University

 It is known that composite materials with improved properties can be achieved through modifications to the topology of their microstructures. Structural topology optimization approaches can… (more)

Subjects/Keywords: Fields of Research; Topology optimization; bulk modulus; shear modulus; thermal conductivity; homogenization; isotropic materials; functionally graded materials

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Radman, A. (2013). Bi-directional evolutionary structural optimization (BESO) for topology optimization of material’s microstructure. (Thesis). RMIT University. Retrieved from http://researchbank.rmit.edu.au/view/rmit:160623

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16th Edition):

Radman, A. “Bi-directional evolutionary structural optimization (BESO) for topology optimization of material’s microstructure.” 2013. Thesis, RMIT University. Accessed August 06, 2020. http://researchbank.rmit.edu.au/view/rmit:160623.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7th Edition):

Radman, A. “Bi-directional evolutionary structural optimization (BESO) for topology optimization of material’s microstructure.” 2013. Web. 06 Aug 2020.

Vancouver:

Radman A. Bi-directional evolutionary structural optimization (BESO) for topology optimization of material’s microstructure. [Internet] [Thesis]. RMIT University; 2013. [cited 2020 Aug 06]. Available from: http://researchbank.rmit.edu.au/view/rmit:160623.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Radman A. Bi-directional evolutionary structural optimization (BESO) for topology optimization of material’s microstructure. [Thesis]. RMIT University; 2013. Available from: http://researchbank.rmit.edu.au/view/rmit:160623

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation


University of California – Berkeley

5. Hargis, Craig Wyatt. Advances in Sustainable Cements.

Degree: Civil and Environmental Engineering, 2013, University of California – Berkeley

 Concrete is crucial for infrastructure development and is the most widely used construction material in the world by mass. Concrete's use will only continue to… (more)

Subjects/Keywords: Civil engineering; Geochemistry; Materials Science; bulk modulus; calcium sulfoaluminate; cement; dimensional stability; expansion; vaterite

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Hargis, C. W. (2013). Advances in Sustainable Cements. (Thesis). University of California – Berkeley. Retrieved from http://www.escholarship.org/uc/item/4n67v8d6

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16th Edition):

Hargis, Craig Wyatt. “Advances in Sustainable Cements.” 2013. Thesis, University of California – Berkeley. Accessed August 06, 2020. http://www.escholarship.org/uc/item/4n67v8d6.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7th Edition):

Hargis, Craig Wyatt. “Advances in Sustainable Cements.” 2013. Web. 06 Aug 2020.

Vancouver:

Hargis CW. Advances in Sustainable Cements. [Internet] [Thesis]. University of California – Berkeley; 2013. [cited 2020 Aug 06]. Available from: http://www.escholarship.org/uc/item/4n67v8d6.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Hargis CW. Advances in Sustainable Cements. [Thesis]. University of California – Berkeley; 2013. Available from: http://www.escholarship.org/uc/item/4n67v8d6

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

6. Freitas, Iberê Cruz. A influência da etapa de fixação do processo de texturização por falsa torção no volume do fio de poliéster texturizado.

Degree: Mestrado, Têxtil e Moda, 2014, University of São Paulo

A propriedade volume do fio texturizado é importante por questões estéticas e funcionais. O volume do fio pode garantir que um produto tenha bom desempenho… (more)

Subjects/Keywords: Bulk; Contração; Contraction; Crimp; Encrespamento; Estabilidade; Módulo; Modulus; Stability; Texturing; Texturização; Volume

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Freitas, I. C. (2014). A influência da etapa de fixação do processo de texturização por falsa torção no volume do fio de poliéster texturizado. (Masters Thesis). University of São Paulo. Retrieved from http://www.teses.usp.br/teses/disponiveis/100/100133/tde-16092014-213609/ ;

Chicago Manual of Style (16th Edition):

Freitas, Iberê Cruz. “A influência da etapa de fixação do processo de texturização por falsa torção no volume do fio de poliéster texturizado.” 2014. Masters Thesis, University of São Paulo. Accessed August 06, 2020. http://www.teses.usp.br/teses/disponiveis/100/100133/tde-16092014-213609/ ;.

MLA Handbook (7th Edition):

Freitas, Iberê Cruz. “A influência da etapa de fixação do processo de texturização por falsa torção no volume do fio de poliéster texturizado.” 2014. Web. 06 Aug 2020.

Vancouver:

Freitas IC. A influência da etapa de fixação do processo de texturização por falsa torção no volume do fio de poliéster texturizado. [Internet] [Masters thesis]. University of São Paulo; 2014. [cited 2020 Aug 06]. Available from: http://www.teses.usp.br/teses/disponiveis/100/100133/tde-16092014-213609/ ;.

Council of Science Editors:

Freitas IC. A influência da etapa de fixação do processo de texturização por falsa torção no volume do fio de poliéster texturizado. [Masters Thesis]. University of São Paulo; 2014. Available from: http://www.teses.usp.br/teses/disponiveis/100/100133/tde-16092014-213609/ ;


Purdue University

7. Balasubramanian, Shambhavi. Fuel type estimation using fuel system parameters.

Degree: MSME, Mechanical Engineering, 2016, Purdue University

  A number of factors are responsible for an increased interest in alternative fuels for transportation and other uses. Among the most widely available alternative… (more)

Subjects/Keywords: Applied sciences; Bulk modulus; Estimation; Fuel; Rail pressure; System; Type; Mechanical Engineering

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Balasubramanian, S. (2016). Fuel type estimation using fuel system parameters. (Thesis). Purdue University. Retrieved from http://docs.lib.purdue.edu/open_access_theses/745

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16th Edition):

Balasubramanian, Shambhavi. “Fuel type estimation using fuel system parameters.” 2016. Thesis, Purdue University. Accessed August 06, 2020. http://docs.lib.purdue.edu/open_access_theses/745.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7th Edition):

Balasubramanian, Shambhavi. “Fuel type estimation using fuel system parameters.” 2016. Web. 06 Aug 2020.

Vancouver:

Balasubramanian S. Fuel type estimation using fuel system parameters. [Internet] [Thesis]. Purdue University; 2016. [cited 2020 Aug 06]. Available from: http://docs.lib.purdue.edu/open_access_theses/745.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Balasubramanian S. Fuel type estimation using fuel system parameters. [Thesis]. Purdue University; 2016. Available from: http://docs.lib.purdue.edu/open_access_theses/745

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation


Florida International University

8. Huang, Shu. Influence of Chemical Composition and Water on the Bulk Modulus of Pyrope.

Degree: PhD, Materials Science and Engineering, 2014, Florida International University

  Garnets are major silicates from the upper mantle to the transition zone. Elastic properties of garnets are essential to interpret the variation of seismic… (more)

Subjects/Keywords: Pyrope; Bulk Modulus; Water; Equation of state; Mineral Physics; Other Materials Science and Engineering

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Huang, S. (2014). Influence of Chemical Composition and Water on the Bulk Modulus of Pyrope. (Doctoral Dissertation). Florida International University. Retrieved from https://digitalcommons.fiu.edu/etd/1185 ; 10.25148/etd.FI14040883 ; FI14040883

Chicago Manual of Style (16th Edition):

Huang, Shu. “Influence of Chemical Composition and Water on the Bulk Modulus of Pyrope.” 2014. Doctoral Dissertation, Florida International University. Accessed August 06, 2020. https://digitalcommons.fiu.edu/etd/1185 ; 10.25148/etd.FI14040883 ; FI14040883.

MLA Handbook (7th Edition):

Huang, Shu. “Influence of Chemical Composition and Water on the Bulk Modulus of Pyrope.” 2014. Web. 06 Aug 2020.

Vancouver:

Huang S. Influence of Chemical Composition and Water on the Bulk Modulus of Pyrope. [Internet] [Doctoral dissertation]. Florida International University; 2014. [cited 2020 Aug 06]. Available from: https://digitalcommons.fiu.edu/etd/1185 ; 10.25148/etd.FI14040883 ; FI14040883.

Council of Science Editors:

Huang S. Influence of Chemical Composition and Water on the Bulk Modulus of Pyrope. [Doctoral Dissertation]. Florida International University; 2014. Available from: https://digitalcommons.fiu.edu/etd/1185 ; 10.25148/etd.FI14040883 ; FI14040883


University of Minnesota

9. Tian, Hao. Study of Active Valve Timing on Efficient Hydraulic Piston Motor Operations.

Degree: PhD, Mechanical Engineering, 2016, University of Minnesota

 Valve timing is critical to the performance of hydraulic piston motors and pumps. With non-optimal valve timing, the pressure differential across the valve during a… (more)

Subjects/Keywords: Digital motor; Effective bulk modulus; Efficiency; Hydraulic valve timing; Rotary valve; Throttling energy loss

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Tian, H. (2016). Study of Active Valve Timing on Efficient Hydraulic Piston Motor Operations. (Doctoral Dissertation). University of Minnesota. Retrieved from http://hdl.handle.net/11299/185632

Chicago Manual of Style (16th Edition):

Tian, Hao. “Study of Active Valve Timing on Efficient Hydraulic Piston Motor Operations.” 2016. Doctoral Dissertation, University of Minnesota. Accessed August 06, 2020. http://hdl.handle.net/11299/185632.

MLA Handbook (7th Edition):

Tian, Hao. “Study of Active Valve Timing on Efficient Hydraulic Piston Motor Operations.” 2016. Web. 06 Aug 2020.

Vancouver:

Tian H. Study of Active Valve Timing on Efficient Hydraulic Piston Motor Operations. [Internet] [Doctoral dissertation]. University of Minnesota; 2016. [cited 2020 Aug 06]. Available from: http://hdl.handle.net/11299/185632.

Council of Science Editors:

Tian H. Study of Active Valve Timing on Efficient Hydraulic Piston Motor Operations. [Doctoral Dissertation]. University of Minnesota; 2016. Available from: http://hdl.handle.net/11299/185632


RMIT University

10. Liang, Y. Energy absorption properties of cellular materials with maximum bulk modulus.

Degree: 2017, RMIT University

 Cellular materials possess excellent mechanical, physical and thermal properties compared to solid materials. They are widely used as an energy absorber in the form of… (more)

Subjects/Keywords: Fields of Research; Bulk Modulus; Cellular Materials; Energy Absorption of Cellular Materials; Mechanical Properties of Cellular Materials; Schwarz Primitive Structure

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Liang, Y. (2017). Energy absorption properties of cellular materials with maximum bulk modulus. (Thesis). RMIT University. Retrieved from http://researchbank.rmit.edu.au/view/rmit:162050

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16th Edition):

Liang, Y. “Energy absorption properties of cellular materials with maximum bulk modulus.” 2017. Thesis, RMIT University. Accessed August 06, 2020. http://researchbank.rmit.edu.au/view/rmit:162050.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7th Edition):

Liang, Y. “Energy absorption properties of cellular materials with maximum bulk modulus.” 2017. Web. 06 Aug 2020.

Vancouver:

Liang Y. Energy absorption properties of cellular materials with maximum bulk modulus. [Internet] [Thesis]. RMIT University; 2017. [cited 2020 Aug 06]. Available from: http://researchbank.rmit.edu.au/view/rmit:162050.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Liang Y. Energy absorption properties of cellular materials with maximum bulk modulus. [Thesis]. RMIT University; 2017. Available from: http://researchbank.rmit.edu.au/view/rmit:162050

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation


KTH

11. Lindroth, Emma. Acoustic Characterization of the Cellulose-coated Perfluorocarbon Droplets based on Phase Velocity Measurements.

Degree: Biotechnology and Health (CBH), 2020, KTH

  Today, microbubbles are one of the most commonly used ultrasound contrast agents, since their high compressibility results in a strongly scattered signal. Despite this… (more)

Subjects/Keywords: Ultrasound; Droplets; Contrast agent; Cellulose; Perfluorocarbon; Acoustic characterization; Non-destructive evaluation; Phase velocity; Bulk modulus; Compressibility; Medical Engineering; Medicinteknik

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Lindroth, E. (2020). Acoustic Characterization of the Cellulose-coated Perfluorocarbon Droplets based on Phase Velocity Measurements. (Thesis). KTH. Retrieved from http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-276837

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16th Edition):

Lindroth, Emma. “Acoustic Characterization of the Cellulose-coated Perfluorocarbon Droplets based on Phase Velocity Measurements.” 2020. Thesis, KTH. Accessed August 06, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-276837.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7th Edition):

Lindroth, Emma. “Acoustic Characterization of the Cellulose-coated Perfluorocarbon Droplets based on Phase Velocity Measurements.” 2020. Web. 06 Aug 2020.

Vancouver:

Lindroth E. Acoustic Characterization of the Cellulose-coated Perfluorocarbon Droplets based on Phase Velocity Measurements. [Internet] [Thesis]. KTH; 2020. [cited 2020 Aug 06]. Available from: http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-276837.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Lindroth E. Acoustic Characterization of the Cellulose-coated Perfluorocarbon Droplets based on Phase Velocity Measurements. [Thesis]. KTH; 2020. Available from: http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-276837

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

12. Njane, Stephen Njehia. Precise Fish Volume Estimation Using Underwater Helmholtz Resonance .

Degree: 2019, Kyoto University

Subjects/Keywords: Helmholtz resonance; Fish; Volume; Bulk modulus; Double cavity

Page 1 Page 2 Page 3 Page 4

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Njane, S. N. (2019). Precise Fish Volume Estimation Using Underwater Helmholtz Resonance . (Thesis). Kyoto University. Retrieved from http://hdl.handle.net/2433/244557

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16th Edition):

Njane, Stephen Njehia. “Precise Fish Volume Estimation Using Underwater Helmholtz Resonance .” 2019. Thesis, Kyoto University. Accessed August 06, 2020. http://hdl.handle.net/2433/244557.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7th Edition):

Njane, Stephen Njehia. “Precise Fish Volume Estimation Using Underwater Helmholtz Resonance .” 2019. Web. 06 Aug 2020.

Vancouver:

Njane SN. Precise Fish Volume Estimation Using Underwater Helmholtz Resonance . [Internet] [Thesis]. Kyoto University; 2019. [cited 2020 Aug 06]. Available from: http://hdl.handle.net/2433/244557.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Njane SN. Precise Fish Volume Estimation Using Underwater Helmholtz Resonance . [Thesis]. Kyoto University; 2019. Available from: http://hdl.handle.net/2433/244557

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation


University of Florida

13. Kumar, Aakash. Towards Alloy Design of Nickel-Base Superalloys Using Atomic Scale Methods.

Degree: PhD, Materials Science and Engineering, 2016, University of Florida

 Commercial Ni-base superalloys belong to a very unique class of materials due to their high mechanical strength in extreme environments. Ten or more alloying elements… (more)

Subjects/Keywords: Alloying; Alloys; Atoms; Bulk modulus; Elasticity; Electrons; Energy; Heat resistant alloys; Materials science; Simulations; ab-initio  – alloy-design  – bulk-modulus  – comb  – defects  – interatomic-potential  – interface  – machine-learning  – metal-ceramic  – molecular-dynamics  – ni-base  – site-preference  – statistical-methods  – superalloys

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Kumar, A. (2016). Towards Alloy Design of Nickel-Base Superalloys Using Atomic Scale Methods. (Doctoral Dissertation). University of Florida. Retrieved from https://ufdc.ufl.edu/UFE0050360

Chicago Manual of Style (16th Edition):

Kumar, Aakash. “Towards Alloy Design of Nickel-Base Superalloys Using Atomic Scale Methods.” 2016. Doctoral Dissertation, University of Florida. Accessed August 06, 2020. https://ufdc.ufl.edu/UFE0050360.

MLA Handbook (7th Edition):

Kumar, Aakash. “Towards Alloy Design of Nickel-Base Superalloys Using Atomic Scale Methods.” 2016. Web. 06 Aug 2020.

Vancouver:

Kumar A. Towards Alloy Design of Nickel-Base Superalloys Using Atomic Scale Methods. [Internet] [Doctoral dissertation]. University of Florida; 2016. [cited 2020 Aug 06]. Available from: https://ufdc.ufl.edu/UFE0050360.

Council of Science Editors:

Kumar A. Towards Alloy Design of Nickel-Base Superalloys Using Atomic Scale Methods. [Doctoral Dissertation]. University of Florida; 2016. Available from: https://ufdc.ufl.edu/UFE0050360


Ohio University

14. Rusia, Devendra Kumar. A modified viscoplastic formulation for large deformations using a bulk modulus approach.

Degree: MS, Mechanical Engineering (Engineering), 1987, Ohio University

A modified viscoplastic formulation for large deformations using a bulk modulus approach Advisors/Committee Members: Gunasekera, Jay (Advisor).

Subjects/Keywords: Engineering, Mechanical; Modified Viscoplastic Formulation; Large deformations; Bulk Modulus Approach

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Rusia, D. K. (1987). A modified viscoplastic formulation for large deformations using a bulk modulus approach. (Masters Thesis). Ohio University. Retrieved from http://rave.ohiolink.edu/etdc/view?acc_num=ohiou1183058011

Chicago Manual of Style (16th Edition):

Rusia, Devendra Kumar. “A modified viscoplastic formulation for large deformations using a bulk modulus approach.” 1987. Masters Thesis, Ohio University. Accessed August 06, 2020. http://rave.ohiolink.edu/etdc/view?acc_num=ohiou1183058011.

MLA Handbook (7th Edition):

Rusia, Devendra Kumar. “A modified viscoplastic formulation for large deformations using a bulk modulus approach.” 1987. Web. 06 Aug 2020.

Vancouver:

Rusia DK. A modified viscoplastic formulation for large deformations using a bulk modulus approach. [Internet] [Masters thesis]. Ohio University; 1987. [cited 2020 Aug 06]. Available from: http://rave.ohiolink.edu/etdc/view?acc_num=ohiou1183058011.

Council of Science Editors:

Rusia DK. A modified viscoplastic formulation for large deformations using a bulk modulus approach. [Masters Thesis]. Ohio University; 1987. Available from: http://rave.ohiolink.edu/etdc/view?acc_num=ohiou1183058011


Kyoto University / 京都大学

15. Lu, Li Rong. Topology optimization of acoustic metamaterials : 音響メタマテリアルのトポロジー最適化.

Degree: 博士(工学), 2014, Kyoto University / 京都大学

新制・課程博士

甲第18469号

工博第3905号

Subjects/Keywords: topology optimization; level set method; acoustic metamaterial; negative bulk modulus; negative mass density

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Lu, L. R. (2014). Topology optimization of acoustic metamaterials : 音響メタマテリアルのトポロジー最適化. (Thesis). Kyoto University / 京都大学. Retrieved from http://hdl.handle.net/2433/189362 ; http://dx.doi.org/10.14989/doctor.k18469

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16th Edition):

Lu, Li Rong. “Topology optimization of acoustic metamaterials : 音響メタマテリアルのトポロジー最適化.” 2014. Thesis, Kyoto University / 京都大学. Accessed August 06, 2020. http://hdl.handle.net/2433/189362 ; http://dx.doi.org/10.14989/doctor.k18469.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7th Edition):

Lu, Li Rong. “Topology optimization of acoustic metamaterials : 音響メタマテリアルのトポロジー最適化.” 2014. Web. 06 Aug 2020.

Vancouver:

Lu LR. Topology optimization of acoustic metamaterials : 音響メタマテリアルのトポロジー最適化. [Internet] [Thesis]. Kyoto University / 京都大学; 2014. [cited 2020 Aug 06]. Available from: http://hdl.handle.net/2433/189362 ; http://dx.doi.org/10.14989/doctor.k18469.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Lu LR. Topology optimization of acoustic metamaterials : 音響メタマテリアルのトポロジー最適化. [Thesis]. Kyoto University / 京都大学; 2014. Available from: http://hdl.handle.net/2433/189362 ; http://dx.doi.org/10.14989/doctor.k18469

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation


Michigan Technological University

16. Karaman, Fatmanur. PETROPHYSICAL ANALYSIS AND ROCK PHYSICS OF THE MOKI FORMATION, NEW ZEALAND.

Degree: MS, Department of Geological and Mining Engineering and Sciences, 2016, Michigan Technological University

  Understanding and applying rock physics fundamentals are essential steps to predict reservoir behavior from geophysical studies. In this work, petrophysical analysis was performed for… (more)

Subjects/Keywords: Petrophysical Analysis; Rock Physics; Log Analysis; Mineral Identification; Velocity; Water Saturation; Gassmann Fluid Substitution; Dry Bulk Modulus; Porosity; Shaly Formation; Geophysics and Seismology; Oil, Gas, and Energy

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Karaman, F. (2016). PETROPHYSICAL ANALYSIS AND ROCK PHYSICS OF THE MOKI FORMATION, NEW ZEALAND. (Masters Thesis). Michigan Technological University. Retrieved from http://digitalcommons.mtu.edu/etdr/178

Chicago Manual of Style (16th Edition):

Karaman, Fatmanur. “PETROPHYSICAL ANALYSIS AND ROCK PHYSICS OF THE MOKI FORMATION, NEW ZEALAND.” 2016. Masters Thesis, Michigan Technological University. Accessed August 06, 2020. http://digitalcommons.mtu.edu/etdr/178.

MLA Handbook (7th Edition):

Karaman, Fatmanur. “PETROPHYSICAL ANALYSIS AND ROCK PHYSICS OF THE MOKI FORMATION, NEW ZEALAND.” 2016. Web. 06 Aug 2020.

Vancouver:

Karaman F. PETROPHYSICAL ANALYSIS AND ROCK PHYSICS OF THE MOKI FORMATION, NEW ZEALAND. [Internet] [Masters thesis]. Michigan Technological University; 2016. [cited 2020 Aug 06]. Available from: http://digitalcommons.mtu.edu/etdr/178.

Council of Science Editors:

Karaman F. PETROPHYSICAL ANALYSIS AND ROCK PHYSICS OF THE MOKI FORMATION, NEW ZEALAND. [Masters Thesis]. Michigan Technological University; 2016. Available from: http://digitalcommons.mtu.edu/etdr/178


Kyoto University

17. Lu, Li Rong. Topology optimization of acoustic metamaterials .

Degree: 2014, Kyoto University

Subjects/Keywords: topology optimization; level set method; acoustic metamaterial; negative bulk modulus; negative mass density

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Lu, L. R. (2014). Topology optimization of acoustic metamaterials . (Thesis). Kyoto University. Retrieved from http://hdl.handle.net/2433/189362

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16th Edition):

Lu, Li Rong. “Topology optimization of acoustic metamaterials .” 2014. Thesis, Kyoto University. Accessed August 06, 2020. http://hdl.handle.net/2433/189362.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7th Edition):

Lu, Li Rong. “Topology optimization of acoustic metamaterials .” 2014. Web. 06 Aug 2020.

Vancouver:

Lu LR. Topology optimization of acoustic metamaterials . [Internet] [Thesis]. Kyoto University; 2014. [cited 2020 Aug 06]. Available from: http://hdl.handle.net/2433/189362.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Lu LR. Topology optimization of acoustic metamaterials . [Thesis]. Kyoto University; 2014. Available from: http://hdl.handle.net/2433/189362

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

18. DING FENG. First principles calculations of structural and electronic properties of C3N4-nPn (n=0, 1, 2, 3, 4).

Degree: 2004, National University of Singapore

Subjects/Keywords: first principles calculation; total energy; bulk modulus; band gap; bond length; bond angle

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

FENG, D. (2004). First principles calculations of structural and electronic properties of C3N4-nPn (n=0, 1, 2, 3, 4). (Thesis). National University of Singapore. Retrieved from http://scholarbank.nus.edu.sg/handle/10635/14201

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16th Edition):

FENG, DING. “First principles calculations of structural and electronic properties of C3N4-nPn (n=0, 1, 2, 3, 4).” 2004. Thesis, National University of Singapore. Accessed August 06, 2020. http://scholarbank.nus.edu.sg/handle/10635/14201.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7th Edition):

FENG, DING. “First principles calculations of structural and electronic properties of C3N4-nPn (n=0, 1, 2, 3, 4).” 2004. Web. 06 Aug 2020.

Vancouver:

FENG D. First principles calculations of structural and electronic properties of C3N4-nPn (n=0, 1, 2, 3, 4). [Internet] [Thesis]. National University of Singapore; 2004. [cited 2020 Aug 06]. Available from: http://scholarbank.nus.edu.sg/handle/10635/14201.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

FENG D. First principles calculations of structural and electronic properties of C3N4-nPn (n=0, 1, 2, 3, 4). [Thesis]. National University of Singapore; 2004. Available from: http://scholarbank.nus.edu.sg/handle/10635/14201

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

19. Guo, Jiaxi. ARCHITECTURE EFFECTS ON THE BULK AND SHEAR RHEOLOGY AND PVT BEHAVIOR OF POLYMERS.

Degree: Chemical Engineering, 2011, Texas Tech University

 The viscoelastic bulk modulus [K(t)] plays an important role in residual stress development during polymer and composite processing and application, and in developing relationships among… (more)

Subjects/Keywords: Bulk modulus; Shear modulus; Rheology; Polycyanurate; Star-shaped polystyrene; Thermodynamic scaling; PVT behavior; Glass transition temperature

…Texas Tech University, Jiaxi Guo, August 2011 ABSTRACT The viscoelastic bulk modulus… …fundamental material functions, bulk modulus, shear modulus, Young’s modulus, and Poisson’s ratio… …investigate the viscoelastic bulk modulus, pressure relaxation responses were measured in a custom… …Texas Tech University, Jiaxi Guo, August 2011 LIST OF TABLES Table 2.1 Bulk modulus for… …98 Table 5.2 KWW fitting parameters for viscoelastic bulk modulus, pressure relaxation… 

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Guo, J. (2011). ARCHITECTURE EFFECTS ON THE BULK AND SHEAR RHEOLOGY AND PVT BEHAVIOR OF POLYMERS. (Thesis). Texas Tech University. Retrieved from http://hdl.handle.net/2346/23740

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16th Edition):

Guo, Jiaxi. “ARCHITECTURE EFFECTS ON THE BULK AND SHEAR RHEOLOGY AND PVT BEHAVIOR OF POLYMERS.” 2011. Thesis, Texas Tech University. Accessed August 06, 2020. http://hdl.handle.net/2346/23740.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7th Edition):

Guo, Jiaxi. “ARCHITECTURE EFFECTS ON THE BULK AND SHEAR RHEOLOGY AND PVT BEHAVIOR OF POLYMERS.” 2011. Web. 06 Aug 2020.

Vancouver:

Guo J. ARCHITECTURE EFFECTS ON THE BULK AND SHEAR RHEOLOGY AND PVT BEHAVIOR OF POLYMERS. [Internet] [Thesis]. Texas Tech University; 2011. [cited 2020 Aug 06]. Available from: http://hdl.handle.net/2346/23740.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Guo J. ARCHITECTURE EFFECTS ON THE BULK AND SHEAR RHEOLOGY AND PVT BEHAVIOR OF POLYMERS. [Thesis]. Texas Tech University; 2011. Available from: http://hdl.handle.net/2346/23740

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

20. Siemens, Alexander Oltmann Nicolaas. Elasticity and plasticity: foams near jamming.

Degree: 2013, Department of Condensed Matter Physics, Leiden Institute of Physics (LION), Faculty of Science, Leiden University

 Many materials, like foams, emulsions, suspensions and granular media obtain finite rigidity once their constituent particles are brought in contact. Nevertheless, all these materials can… (more)

Subjects/Keywords: Foams, Elasticity, Plasticity, Jamming; Foams; Nonaffinity; Elastic modulus; Jamming; Shear; Bulk compression; Elasticity; Plasticity; Foams, Elasticity, Plasticity, Jamming; Foams; Nonaffinity; Elastic modulus; Jamming; Shear; Bulk compression; Elasticity; Plasticity

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Siemens, A. O. N. (2013). Elasticity and plasticity: foams near jamming. (Doctoral Dissertation). Department of Condensed Matter Physics, Leiden Institute of Physics (LION), Faculty of Science, Leiden University. Retrieved from http://hdl.handle.net/1887/21709

Chicago Manual of Style (16th Edition):

Siemens, Alexander Oltmann Nicolaas. “Elasticity and plasticity: foams near jamming.” 2013. Doctoral Dissertation, Department of Condensed Matter Physics, Leiden Institute of Physics (LION), Faculty of Science, Leiden University. Accessed August 06, 2020. http://hdl.handle.net/1887/21709.

MLA Handbook (7th Edition):

Siemens, Alexander Oltmann Nicolaas. “Elasticity and plasticity: foams near jamming.” 2013. Web. 06 Aug 2020.

Vancouver:

Siemens AON. Elasticity and plasticity: foams near jamming. [Internet] [Doctoral dissertation]. Department of Condensed Matter Physics, Leiden Institute of Physics (LION), Faculty of Science, Leiden University; 2013. [cited 2020 Aug 06]. Available from: http://hdl.handle.net/1887/21709.

Council of Science Editors:

Siemens AON. Elasticity and plasticity: foams near jamming. [Doctoral Dissertation]. Department of Condensed Matter Physics, Leiden Institute of Physics (LION), Faculty of Science, Leiden University; 2013. Available from: http://hdl.handle.net/1887/21709

21. Motamed, Arash. Constitutive modeling of viscoelastic behavior of bituminous materials.

Degree: PhD, Civil Engineering, 2012, University of Texas – Austin

 Asphalt mixtures are complex composites that comprise aggregate, asphalt binder, and air. Several research studies have shown that the mechanical behavior of the asphalt mixture… (more)

Subjects/Keywords: Asphalt binder; Constitutive modeling; Viscoelastic; Shear modulus; Nonlinearity; Bulk modulus; Dynamic shear rheometer; Poker-chip geometry; Pavement; Three-dimensional analysis

…73 Chapter 4: Bulk Modulus of Asphalt Binders… …x29; either the bulk modulus or Poisson’s ratio is time independent. Computational methods… …nonlinearities. 2 With regards to the Poisson’s ratio and bulk modulus, different assumptions are… …typically employed regarding the time-dependent behavior of the bulk modulus of asphaltic… …assumption implies that the Poisson’s ratio changes with time while the bulk modulus in constant… 

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Motamed, A. (2012). Constitutive modeling of viscoelastic behavior of bituminous materials. (Doctoral Dissertation). University of Texas – Austin. Retrieved from http://hdl.handle.net/2152/23464

Chicago Manual of Style (16th Edition):

Motamed, Arash. “Constitutive modeling of viscoelastic behavior of bituminous materials.” 2012. Doctoral Dissertation, University of Texas – Austin. Accessed August 06, 2020. http://hdl.handle.net/2152/23464.

MLA Handbook (7th Edition):

Motamed, Arash. “Constitutive modeling of viscoelastic behavior of bituminous materials.” 2012. Web. 06 Aug 2020.

Vancouver:

Motamed A. Constitutive modeling of viscoelastic behavior of bituminous materials. [Internet] [Doctoral dissertation]. University of Texas – Austin; 2012. [cited 2020 Aug 06]. Available from: http://hdl.handle.net/2152/23464.

Council of Science Editors:

Motamed A. Constitutive modeling of viscoelastic behavior of bituminous materials. [Doctoral Dissertation]. University of Texas – Austin; 2012. Available from: http://hdl.handle.net/2152/23464

22. 久重, 哲郎. 希土類固溶セリアの熱的・機械的特性.

Degree: Japan Advanced Institute of Science and Technology / 北陸先端科学技術大学院大学

Supervisor:辻 利秀

材料科学研究科

修士

Subjects/Keywords: 熱膨張, 体積弾性率, 熱容量; thermal expansion, bulk modulus, heat capacity

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

久重, . (n.d.). 希土類固溶セリアの熱的・機械的特性. (Thesis). Japan Advanced Institute of Science and Technology / 北陸先端科学技術大学院大学. Retrieved from http://hdl.handle.net/10119/3093

Note: this citation may be lacking information needed for this citation format:
No year of publication.
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16th Edition):

久重, 哲郎. “希土類固溶セリアの熱的・機械的特性.” Thesis, Japan Advanced Institute of Science and Technology / 北陸先端科学技術大学院大学. Accessed August 06, 2020. http://hdl.handle.net/10119/3093.

Note: this citation may be lacking information needed for this citation format:
No year of publication.
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7th Edition):

久重, 哲郎. “希土類固溶セリアの熱的・機械的特性.” Web. 06 Aug 2020.

Note: this citation may be lacking information needed for this citation format:
No year of publication.

Vancouver:

久重 . 希土類固溶セリアの熱的・機械的特性. [Internet] [Thesis]. Japan Advanced Institute of Science and Technology / 北陸先端科学技術大学院大学; [cited 2020 Aug 06]. Available from: http://hdl.handle.net/10119/3093.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
No year of publication.

Council of Science Editors:

久重 . 希土類固溶セリアの熱的・機械的特性. [Thesis]. Japan Advanced Institute of Science and Technology / 北陸先端科学技術大学院大学; Available from: http://hdl.handle.net/10119/3093

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation
No year of publication.


Virginia Tech

23. Johnson, Eleda. The Elastic Behavior of Plagioclase Feldspar at High Pressure.

Degree: MS, Geosciences, 2007, Virginia Tech

 Feldspars are one of the archetypical families of framework silicates. They not only comprise around 60% volumetrically of the Earthâ s crust, but are among… (more)

Subjects/Keywords: unit-cell parameters; X-ray diffraction; bulk modulus; equation of state; elasticity; plagioclase; pressure

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Johnson, E. (2007). The Elastic Behavior of Plagioclase Feldspar at High Pressure. (Masters Thesis). Virginia Tech. Retrieved from http://hdl.handle.net/10919/36450

Chicago Manual of Style (16th Edition):

Johnson, Eleda. “The Elastic Behavior of Plagioclase Feldspar at High Pressure.” 2007. Masters Thesis, Virginia Tech. Accessed August 06, 2020. http://hdl.handle.net/10919/36450.

MLA Handbook (7th Edition):

Johnson, Eleda. “The Elastic Behavior of Plagioclase Feldspar at High Pressure.” 2007. Web. 06 Aug 2020.

Vancouver:

Johnson E. The Elastic Behavior of Plagioclase Feldspar at High Pressure. [Internet] [Masters thesis]. Virginia Tech; 2007. [cited 2020 Aug 06]. Available from: http://hdl.handle.net/10919/36450.

Council of Science Editors:

Johnson E. The Elastic Behavior of Plagioclase Feldspar at High Pressure. [Masters Thesis]. Virginia Tech; 2007. Available from: http://hdl.handle.net/10919/36450

24. Thornton, Ben Johnston. Parameter Evaluation and Sensitivity Analysis for an Automotive Damper Model.

Degree: MS, Mechanical Engineering, 2012, The Ohio State University

 Physical models are commonly used in the automotive industry. Accurate models exist for most automotive systems. However, few accurate models have been developed to model… (more)

Subjects/Keywords: Automotive Engineering; Mechanical Engineering; Automotive Suspension; Damper; Modeling; Bulk Modulus; Shim Stiffness; Check Valve

…of Tables Table Page 4.1 Bulk Modulus of Nitrogen Gas at 140.5 psi and 22◦ C… …21 4.2 Mean Bulk Modulus for Increasing and Decreasing Pressure . . . . . 25 6.1… …Analytical Damper Model . . . . . . . . . . . . . . . . . . 11 4.1 Bulk Modulus Test Setup… …Relationshiop during Quasi-Static Fluid Bulk Modulus 24 5.1 Experimental Setup for Coulomb Friction… …for the change in volume caused by the insertion of the rod. Due to the low bulk modulus of… 

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Thornton, B. J. (2012). Parameter Evaluation and Sensitivity Analysis for an Automotive Damper Model. (Masters Thesis). The Ohio State University. Retrieved from http://rave.ohiolink.edu/etdc/view?acc_num=osu1354115794

Chicago Manual of Style (16th Edition):

Thornton, Ben Johnston. “Parameter Evaluation and Sensitivity Analysis for an Automotive Damper Model.” 2012. Masters Thesis, The Ohio State University. Accessed August 06, 2020. http://rave.ohiolink.edu/etdc/view?acc_num=osu1354115794.

MLA Handbook (7th Edition):

Thornton, Ben Johnston. “Parameter Evaluation and Sensitivity Analysis for an Automotive Damper Model.” 2012. Web. 06 Aug 2020.

Vancouver:

Thornton BJ. Parameter Evaluation and Sensitivity Analysis for an Automotive Damper Model. [Internet] [Masters thesis]. The Ohio State University; 2012. [cited 2020 Aug 06]. Available from: http://rave.ohiolink.edu/etdc/view?acc_num=osu1354115794.

Council of Science Editors:

Thornton BJ. Parameter Evaluation and Sensitivity Analysis for an Automotive Damper Model. [Masters Thesis]. The Ohio State University; 2012. Available from: http://rave.ohiolink.edu/etdc/view?acc_num=osu1354115794

25. Liu, Wei. Investigations of the atomic order and molar volume in the binary sigma phase by DFT and CALPHAD approaches : Etude de l'ordre atomique et du volume molaire dans la phase binaire sigma par approches DFT et CALPHAD.

Degree: Docteur es, Physique et sciences de la matière. Matière condensée et nanosciences, 2017, Aix-Marseille; Université de Shangai (Chine)

La phase sigma peut servir de prototype de phases topologiquement compactes, car la phase sigma possède une large gamme d'homogénéité et il existe de nombreuses… (more)

Subjects/Keywords: Phase sigma; Ordre atomique; Volume molaire; Enthalpie de formation; Module d’élasticité isostatique; Calculs de premiers principes; Dft; Calphad; Sigma phase; Atomic order; Molar volume; Enthalpy of formation; Bulk modulus; First-Principles calculations; Dft; Calphad; 539

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Liu, W. (2017). Investigations of the atomic order and molar volume in the binary sigma phase by DFT and CALPHAD approaches : Etude de l'ordre atomique et du volume molaire dans la phase binaire sigma par approches DFT et CALPHAD. (Doctoral Dissertation). Aix-Marseille; Université de Shangai (Chine). Retrieved from http://www.theses.fr/2017AIXM0471

Chicago Manual of Style (16th Edition):

Liu, Wei. “Investigations of the atomic order and molar volume in the binary sigma phase by DFT and CALPHAD approaches : Etude de l'ordre atomique et du volume molaire dans la phase binaire sigma par approches DFT et CALPHAD.” 2017. Doctoral Dissertation, Aix-Marseille; Université de Shangai (Chine). Accessed August 06, 2020. http://www.theses.fr/2017AIXM0471.

MLA Handbook (7th Edition):

Liu, Wei. “Investigations of the atomic order and molar volume in the binary sigma phase by DFT and CALPHAD approaches : Etude de l'ordre atomique et du volume molaire dans la phase binaire sigma par approches DFT et CALPHAD.” 2017. Web. 06 Aug 2020.

Vancouver:

Liu W. Investigations of the atomic order and molar volume in the binary sigma phase by DFT and CALPHAD approaches : Etude de l'ordre atomique et du volume molaire dans la phase binaire sigma par approches DFT et CALPHAD. [Internet] [Doctoral dissertation]. Aix-Marseille; Université de Shangai (Chine); 2017. [cited 2020 Aug 06]. Available from: http://www.theses.fr/2017AIXM0471.

Council of Science Editors:

Liu W. Investigations of the atomic order and molar volume in the binary sigma phase by DFT and CALPHAD approaches : Etude de l'ordre atomique et du volume molaire dans la phase binaire sigma par approches DFT et CALPHAD. [Doctoral Dissertation]. Aix-Marseille; Université de Shangai (Chine); 2017. Available from: http://www.theses.fr/2017AIXM0471


University of Florida

26. Huang, Yung-Hui, 1953-. Thermodynamic properties of compressed liquids and liquid mixtures from fluctuation solution theory.

Degree: 1986, University of Florida

Subjects/Keywords: Bulk modulus; Correlations; Crossovers; High pressure; Isotherms; Liquids; Mathematical independent variables; Pressure; Thermodynamic properties; Volume; Chemical Engineering thesis Ph. D; Liquids; Liquids  – Thermodynamics; Molecular dynamics

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Huang, Yung-Hui, 1. (1986). Thermodynamic properties of compressed liquids and liquid mixtures from fluctuation solution theory. (Thesis). University of Florida. Retrieved from https://ufdc.ufl.edu/AA00041171

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16th Edition):

Huang, Yung-Hui, 1953-. “Thermodynamic properties of compressed liquids and liquid mixtures from fluctuation solution theory.” 1986. Thesis, University of Florida. Accessed August 06, 2020. https://ufdc.ufl.edu/AA00041171.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7th Edition):

Huang, Yung-Hui, 1953-. “Thermodynamic properties of compressed liquids and liquid mixtures from fluctuation solution theory.” 1986. Web. 06 Aug 2020.

Vancouver:

Huang, Yung-Hui 1. Thermodynamic properties of compressed liquids and liquid mixtures from fluctuation solution theory. [Internet] [Thesis]. University of Florida; 1986. [cited 2020 Aug 06]. Available from: https://ufdc.ufl.edu/AA00041171.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Huang, Yung-Hui 1. Thermodynamic properties of compressed liquids and liquid mixtures from fluctuation solution theory. [Thesis]. University of Florida; 1986. Available from: https://ufdc.ufl.edu/AA00041171

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation


University of Florida

27. Shukla, Priyank. Thermal Transport in Selected Ceramic Materials for Potential Application as Inert Matrix Fuel or Thermal Barrier Coating by Atomic Level Simulation.

Degree: PhD, Materials Science and Engineering, 2010, University of Florida

 Thermal management is a critical issue in nuclear reactor and thermal barrier coating applications. Current research for next-gen nuclear fuel is looking into materials to… (more)

Subjects/Keywords: Atoms; Bulk modulus; Crystal structure; Ions; Phonons; Polycrystals; Simulations; Spinel; Thermal conductivity; Thermal expansion; aurivillius, composite, elastic, imf, inversion, mgo, molecular, nuclear, pyrochlore, simulation, spinel, tbc, thermal

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Shukla, P. (2010). Thermal Transport in Selected Ceramic Materials for Potential Application as Inert Matrix Fuel or Thermal Barrier Coating by Atomic Level Simulation. (Doctoral Dissertation). University of Florida. Retrieved from https://ufdc.ufl.edu/UFE0042128

Chicago Manual of Style (16th Edition):

Shukla, Priyank. “Thermal Transport in Selected Ceramic Materials for Potential Application as Inert Matrix Fuel or Thermal Barrier Coating by Atomic Level Simulation.” 2010. Doctoral Dissertation, University of Florida. Accessed August 06, 2020. https://ufdc.ufl.edu/UFE0042128.

MLA Handbook (7th Edition):

Shukla, Priyank. “Thermal Transport in Selected Ceramic Materials for Potential Application as Inert Matrix Fuel or Thermal Barrier Coating by Atomic Level Simulation.” 2010. Web. 06 Aug 2020.

Vancouver:

Shukla P. Thermal Transport in Selected Ceramic Materials for Potential Application as Inert Matrix Fuel or Thermal Barrier Coating by Atomic Level Simulation. [Internet] [Doctoral dissertation]. University of Florida; 2010. [cited 2020 Aug 06]. Available from: https://ufdc.ufl.edu/UFE0042128.

Council of Science Editors:

Shukla P. Thermal Transport in Selected Ceramic Materials for Potential Application as Inert Matrix Fuel or Thermal Barrier Coating by Atomic Level Simulation. [Doctoral Dissertation]. University of Florida; 2010. Available from: https://ufdc.ufl.edu/UFE0042128

28. Gholizadeh, Hossein. Modeling and experimental evaluation of the effective bulk modulus for a mixture of hydraulic oil and air.

Degree: 2013, University of Saskatchewan

 The bulk modulus of pure hydraulic oil and its dependency on pressure and temperature has been studied extensively over the past years. A comprehensive review… (more)

Subjects/Keywords: Fluid; Bulk modulus; Air; Hydraulic oil; Mixture; Isothermal; Adibatic; Secant; Tangent; Saturation; Critical pressure; modeling; Least squares method

…93 6.2.1 Isothermal tangent bulk modulus of the test oil… …96 6.2.2 Adiabatic tangent bulk modulus of the test oil… …97 6.2.3 Tangent bulk modulus of the test oil for other volume change rates… …98 6.3 Experimental results of the effective bulk modulus of the lumped air phase… …107 6.4 Experimental results of the effective bulk modulus of the distributed air phase… 

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Gholizadeh, H. (2013). Modeling and experimental evaluation of the effective bulk modulus for a mixture of hydraulic oil and air. (Thesis). University of Saskatchewan. Retrieved from http://hdl.handle.net/10388/ETD-2013-09-1225

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16th Edition):

Gholizadeh, Hossein. “Modeling and experimental evaluation of the effective bulk modulus for a mixture of hydraulic oil and air.” 2013. Thesis, University of Saskatchewan. Accessed August 06, 2020. http://hdl.handle.net/10388/ETD-2013-09-1225.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7th Edition):

Gholizadeh, Hossein. “Modeling and experimental evaluation of the effective bulk modulus for a mixture of hydraulic oil and air.” 2013. Web. 06 Aug 2020.

Vancouver:

Gholizadeh H. Modeling and experimental evaluation of the effective bulk modulus for a mixture of hydraulic oil and air. [Internet] [Thesis]. University of Saskatchewan; 2013. [cited 2020 Aug 06]. Available from: http://hdl.handle.net/10388/ETD-2013-09-1225.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Gholizadeh H. Modeling and experimental evaluation of the effective bulk modulus for a mixture of hydraulic oil and air. [Thesis]. University of Saskatchewan; 2013. Available from: http://hdl.handle.net/10388/ETD-2013-09-1225

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation


Brigham Young University

29. Lee, Wayne Yeung. Numerical Modeling of Blast-Induced Liquefaction.

Degree: PhD, 2006, Brigham Young University

 A research study has been conducted to simulate liquefaction in saturated sandy soil induced by nearby controlled blasts. The purpose of the study is to… (more)

Subjects/Keywords: FEA; ANSYS; LS-DYNA; blast-induced; liquefaction; numerical model; geotechnical; computational mechanics; saturated soil; geo-material modeling; earthquake; detonation; hydrocode; shock physics; LaGrangian; geo-mechanics; Bulk modulus transition; Civil and Environmental Engineering

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Lee, W. Y. (2006). Numerical Modeling of Blast-Induced Liquefaction. (Doctoral Dissertation). Brigham Young University. Retrieved from https://scholarsarchive.byu.edu/cgi/viewcontent.cgi?article=1523&context=etd

Chicago Manual of Style (16th Edition):

Lee, Wayne Yeung. “Numerical Modeling of Blast-Induced Liquefaction.” 2006. Doctoral Dissertation, Brigham Young University. Accessed August 06, 2020. https://scholarsarchive.byu.edu/cgi/viewcontent.cgi?article=1523&context=etd.

MLA Handbook (7th Edition):

Lee, Wayne Yeung. “Numerical Modeling of Blast-Induced Liquefaction.” 2006. Web. 06 Aug 2020.

Vancouver:

Lee WY. Numerical Modeling of Blast-Induced Liquefaction. [Internet] [Doctoral dissertation]. Brigham Young University; 2006. [cited 2020 Aug 06]. Available from: https://scholarsarchive.byu.edu/cgi/viewcontent.cgi?article=1523&context=etd.

Council of Science Editors:

Lee WY. Numerical Modeling of Blast-Induced Liquefaction. [Doctoral Dissertation]. Brigham Young University; 2006. Available from: https://scholarsarchive.byu.edu/cgi/viewcontent.cgi?article=1523&context=etd

.