subject:( Steam turbine)

University of Cambridge

1. Ding, Bowen. Aerodynamics of Low Pressure Steam Turbine Exhaust Systems .

Degree: 2019, University of Cambridge

URL: https://www.repository.cam.ac.uk/handle/1810/290137

► The low pressure (LP) exhaust system presents a promising avenue for improving the performance of large steam turbines. For this reason, LP exhaust systems have… (more)

▼ The low pressure (LP) exhaust system presents a promising avenue for improving the performance of large steam turbines. For this reason, LP exhaust systems have attracted the attention of the research community for decades. Nevertheless, we still lack understanding of the flow physics and loss mechanisms in the exhaust system, especially at part-load conditions. It is also unclear how the exhaust system should be designed when its required operating range widens. This thesis provides solutions to these aerodynamic issues through experimental and numerical investigations, and provides tools that could contribute to better designs of LP exhaust systems. Firstly, the Computational Fluid Dynamics (CFD) solver ANSYS CFX was validated against experiments performed on a scaled test rig under representative part-load flow conditions. This validation exposed the weakness of Reynolds-averaged Navier–Stokes (RANS) CFD when there is a highly swirling flow and large separation regions in the exhaust diffuser. To facilitate the numerical studies, a series of tools were also developed. A design suite, ExhaustGen, was used to automate the pre- and post-processing of CFD calculations. The exhaust diffuser was parametrised using "Minimum Energy Curves", which reduce the dimension of parameter space. Further, a suitable stage-hood interface treatment (Multiple Mixing Planes) was chosen to predict the circumferentially non-uniform flow in the exhaust hood at low computational cost. Numerical investigation of the baseline geometry provided insights into the key flow features and loss mechanisms in the exhaust system, over a wide range of operating conditions. In particular, the bearing cone separation was identified as a key source of loss at part-load conditions. The effect of stage-hood interaction on the performance and design of the exhaust system was studied by varying the rotor blade design, which can positively influence system performance. Finally, a global sensitivity study was performed to identify the most influential design parameters of the exhaust hood. These findings allow, for the first time, LP exhaust hood performance maps to be constructed, so that the benefits of choosing a suitable hood geometry and blade design can be revealed. The thesis also offers contribution towards formulating LP exhaust system design guidance for a wide operating range.

Subjects/Keywords: Aerodynamics; Steam Turbine; Exhaust Hood

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Ding, B. (2019). Aerodynamics of Low Pressure Steam Turbine Exhaust Systems . (Thesis). University of Cambridge. Retrieved from https://www.repository.cam.ac.uk/handle/1810/290137

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Ding, Bowen. “Aerodynamics of Low Pressure Steam Turbine Exhaust Systems .” 2019. Thesis, University of Cambridge. Accessed December 14, 2019. https://www.repository.cam.ac.uk/handle/1810/290137.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Ding, Bowen. “Aerodynamics of Low Pressure Steam Turbine Exhaust Systems .” 2019. Web. 14 Dec 2019.

Vancouver:

Ding B. Aerodynamics of Low Pressure Steam Turbine Exhaust Systems . [Internet] [Thesis]. University of Cambridge; 2019. [cited 2019 Dec 14]. Available from: https://www.repository.cam.ac.uk/handle/1810/290137.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Ding B. Aerodynamics of Low Pressure Steam Turbine Exhaust Systems . [Thesis]. University of Cambridge; 2019. Available from: https://www.repository.cam.ac.uk/handle/1810/290137

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

University of Cambridge

2. Ding, Bowen. Aerodynamics of low pressure steam turbine exhaust systems.

Degree: PhD, 2019, University of Cambridge

URL: https://www.repository.cam.ac.uk/handle/1810/290137 ; https://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.767883

► The low pressure (LP) exhaust system presents a promising avenue for improving the performance of large steam turbines. For this reason, LP exhaust systems have… (more)

▼ The low pressure (LP) exhaust system presents a promising avenue for improving the performance of large steam turbines. For this reason, LP exhaust systems have attracted the attention of the research community for decades. Nevertheless, we still lack understanding of the flow physics and loss mechanisms in the exhaust system, especially at part-load conditions. It is also unclear how the exhaust system should be designed when its required operating range widens. This thesis provides solutions to these aerodynamic issues through experimental and numerical investigations, and provides tools that could contribute to better designs of LP exhaust systems. Firstly, the Computational Fluid Dynamics (CFD) solver ANSYS CFX was validated against experiments performed on a scaled test rig under representative part-load flow conditions. This validation exposed the weakness of Reynolds-averaged Navier-Stokes (RANS) CFD when there is a highly swirling flow and large separation regions in the exhaust diffuser. To facilitate the numerical studies, a series of tools were also developed. A design suite, ExhaustGen, was used to automate the pre- and post-processing of CFD calculations. The exhaust diffuser was parametrised using "Minimum Energy Curves", which reduce the dimension of parameter space. Further, a suitable stage-hood interface treatment (Multiple Mixing Planes) was chosen to predict the circumferentially non-uniform flow in the exhaust hood at low computational cost. Numerical investigation of the baseline geometry provided insights into the key flow features and loss mechanisms in the exhaust system, over a wide range of operating conditions. In particular, the bearing cone separation was identified as a key source of loss at part-load conditions. The effect of stage-hood interaction on the performance and design of the exhaust system was studied by varying the rotor blade design, which can positively influence system performance. Finally, a global sensitivity study was performed to identify the most influential design parameters of the exhaust hood. These findings allow, for the first time, LP exhaust hood performance maps to be constructed, so that the benefits of choosing a suitable hood geometry and blade design can be revealed. The thesis also offers contribution towards formulating LP exhaust system design guidance for a wide operating range.

Subjects/Keywords: Aerodynamics; Steam Turbine; Exhaust Hood

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Ding, B. (2019). Aerodynamics of low pressure steam turbine exhaust systems. (Doctoral Dissertation). University of Cambridge. Retrieved from https://www.repository.cam.ac.uk/handle/1810/290137 ; https://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.767883

Chicago Manual of Style (16^th Edition):

Ding, Bowen. “Aerodynamics of low pressure steam turbine exhaust systems.” 2019. Doctoral Dissertation, University of Cambridge. Accessed December 14, 2019. https://www.repository.cam.ac.uk/handle/1810/290137 ; https://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.767883.

MLA Handbook (7^th Edition):

Ding, Bowen. “Aerodynamics of low pressure steam turbine exhaust systems.” 2019. Web. 14 Dec 2019.

Vancouver:

Ding B. Aerodynamics of low pressure steam turbine exhaust systems. [Internet] [Doctoral dissertation]. University of Cambridge; 2019. [cited 2019 Dec 14]. Available from: https://www.repository.cam.ac.uk/handle/1810/290137 ; https://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.767883.

Council of Science Editors:

Ding B. Aerodynamics of low pressure steam turbine exhaust systems. [Doctoral Dissertation]. University of Cambridge; 2019. Available from: https://www.repository.cam.ac.uk/handle/1810/290137 ; https://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.767883

Rochester Institute of Technology

3. Guerrette, Jonathan. Design of a test loop for performance testing of steam turbines under a variety of operating conditions.

Degree: Mechanical Engineering, 2011, Rochester Institute of Technology

URL: https://scholarworks.rit.edu/theses/5858

► The steam turbine is one of the most widely used energy conversion devices in the world, providing shaft power for electricity production, chemical processing, and… (more)

▼ The steam turbine is one of the most widely used energy conversion devices in the world, providing shaft power for electricity production, chemical processing, and HVAC systems. There are new opportunities in growing renewable and combined cycle applications. End-users are asking for energy efficiency improvements that require manufacturers to renew their experimentally verified design methods. A structured design approach was carried out along three integrated research thrusts. The first two thrusts, Turbine Performance Prediction and Measurement Planning, were carried out with the aim of supporting the theoretical modeling required for the third thrust, System Modeling. The primary use of the steam turbine test loop will be to improve performance prediction techniques. Thus the primary focus of the first thrust was to describe empirical loss correlations found in the literature. For the second thrust, a preliminary review of measurement codes and standards was carried out to determine their impact on overall test loop design. For the third thrust, quasi-steady theoretical models were derived from first principles for the turbine, condenser, pump, boiler, and pipe components using control volume analyses. The theoretical models were implemented in a new open source simulation environment that carries out the calculation process over a range of up-to three turbine model inputs. A parametric study was undertaken with the goal of defining preliminary design specifications for the test loop components. The test loop was simulated across a wide range of steady states for three different turbine blade configurations, each at three different values of the blade row enthalpy-loss coefficient. The parametric study demonstrates full coverage of possible turbine operating conditions. The results of the simulations were analyzed to narrow the required operating range of the test loop to a series of turbine test paths. The final operational envelope yielded a set of test loop component requirements for the condenser, pump, boiler, and dynamometer. These requirements were used to recommend off-the-shelf options available from manufacturers of each component type. Advisors/Committee Members: Hensel, Edward.

Subjects/Keywords: Cycle; Open source; Rankine; Simulation; Steam; Turbine

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Guerrette, J. (2011). Design of a test loop for performance testing of steam turbines under a variety of operating conditions. (Thesis). Rochester Institute of Technology. Retrieved from https://scholarworks.rit.edu/theses/5858

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Guerrette, Jonathan. “Design of a test loop for performance testing of steam turbines under a variety of operating conditions.” 2011. Thesis, Rochester Institute of Technology. Accessed December 14, 2019. https://scholarworks.rit.edu/theses/5858.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Guerrette, Jonathan. “Design of a test loop for performance testing of steam turbines under a variety of operating conditions.” 2011. Web. 14 Dec 2019.

Vancouver:

Guerrette J. Design of a test loop for performance testing of steam turbines under a variety of operating conditions. [Internet] [Thesis]. Rochester Institute of Technology; 2011. [cited 2019 Dec 14]. Available from: https://scholarworks.rit.edu/theses/5858.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Guerrette J. Design of a test loop for performance testing of steam turbines under a variety of operating conditions. [Thesis]. Rochester Institute of Technology; 2011. Available from: https://scholarworks.rit.edu/theses/5858

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

4. Vaľočík, Jan. Modernizace VT dílu parní turbiny 300 MW .

Degree: 2014, Brno University of Technology

URL: http://hdl.handle.net/11012/32832

► Náplní této diplomové práce je návrh modernizované třítělesové parní turbíny 300 MW typu K300 – 170 s přihříváním páry. V první části práce je vypracováno… (more)

Subjects/Keywords: Parní turbína; kondenzační turbína; rovnotlaká turbína; přihřívání; parní oběh; modernizace turbíny.; Steam turbine; condensing turbine; impulse turbine; reheat; steam cycle; retrofit

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Vaľočík, J. (2014). Modernizace VT dílu parní turbiny 300 MW . (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/32832

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Vaľočík, Jan. “Modernizace VT dílu parní turbiny 300 MW .” 2014. Thesis, Brno University of Technology. Accessed December 14, 2019. http://hdl.handle.net/11012/32832.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Vaľočík, Jan. “Modernizace VT dílu parní turbiny 300 MW .” 2014. Web. 14 Dec 2019.

Vancouver:

Vaľočík J. Modernizace VT dílu parní turbiny 300 MW . [Internet] [Thesis]. Brno University of Technology; 2014. [cited 2019 Dec 14]. Available from: http://hdl.handle.net/11012/32832.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Vaľočík J. Modernizace VT dílu parní turbiny 300 MW . [Thesis]. Brno University of Technology; 2014. Available from: http://hdl.handle.net/11012/32832

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

NSYSU

5. Tsai, Chia-Chun. Study of Linear Equivalent Circuits of Electromechanical Systems for Turbine Generator Units.

Degree: PhD, Electrical Engineering, 2012, NSYSU

URL: http://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-1227112-113452

► The thesis utilizes the analogy in dynamic equations between a mechanical and an electrical system to convert the steam-turbine, micro-turbine, wind-turbine and hydro-turbine generator mechanical… (more)

▼ The thesis utilizes the analogy in dynamic equations between a mechanical and an electrical system to convert the steam-turbine, micro-turbine, wind-turbine and hydro-turbine generator mechanical model to equivalent electrical circuit models respectively. And based on the round rotor type and permanent magnetic rotor type synchronous generatorsâ dynamic equations, as well as their electromagnetic torque equations, the equivalent electrical interface circuits were derived respectively. By using the interface circuit, the circuit model of synchronous generator and the equivalent electrical circuit model of turbine-generator mechanism can thus be combined into the electromechanical integrated circuit model (Theveninâs analogy circuit model and Norton's analogy circuit model). The electromechanical integrated circuit model is helpful for analyzing the energy conversion, power transmission and interactions between the mechanical and electrical systems for a turbine generator unit. In order to learn about these electromechanical interactions by using the proposed electromechanical integrated circuit model, the thesis has made a study on the torsional mode frequencies for a small gas turbine generator unit and for a large steam turbine generator unit respectively. By way of the frequency scanning and eigenvalue calculation, it is found that the torsional mode frequencies can be changed due to the electromechanical integration. Moreover, the small unit was more affected by the electromechanical integration than the large unit. Finally, we studied the effect of operations of an Electric Arc Furnaces (EAF) on torsional vibrations of a low capacity turbine generator. The electric system studied belongs to a practical steel plant in an industrial park. Based on the electromechanical integrated equivalent circuit model, a flywheel coupling shaft was designed. It is found by simulations that the coupling shaft can be quite effective in alleviating vibrations caused by the system unbalance arising from the EAF operations. Advisors/Committee Members: Ching-Yin Lee (chair), Ta-Peng Tsao (committee member), Ming-Yuan Cho (chair), Chin-Sien Moo (committee member), Chwen Chyn (chair), Shyh-Jier Huang (chair), Ming-Tong TSAI (chair).

Subjects/Keywords: Torsional Vibration; Electromechanical Analogy; Electric Arc Furnace; Hydro Turbine Generator; Wind Turbine Generator; Steam Turbine Generator; Micro Turbine Generator

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Tsai, C. (2012). Study of Linear Equivalent Circuits of Electromechanical Systems for Turbine Generator Units. (Doctoral Dissertation). NSYSU. Retrieved from http://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-1227112-113452

Chicago Manual of Style (16^th Edition):

Tsai, Chia-Chun. “Study of Linear Equivalent Circuits of Electromechanical Systems for Turbine Generator Units.” 2012. Doctoral Dissertation, NSYSU. Accessed December 14, 2019. http://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-1227112-113452.

MLA Handbook (7^th Edition):

Tsai, Chia-Chun. “Study of Linear Equivalent Circuits of Electromechanical Systems for Turbine Generator Units.” 2012. Web. 14 Dec 2019.

Vancouver:

Tsai C. Study of Linear Equivalent Circuits of Electromechanical Systems for Turbine Generator Units. [Internet] [Doctoral dissertation]. NSYSU; 2012. [cited 2019 Dec 14]. Available from: http://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-1227112-113452.

Council of Science Editors:

Tsai C. Study of Linear Equivalent Circuits of Electromechanical Systems for Turbine Generator Units. [Doctoral Dissertation]. NSYSU; 2012. Available from: http://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-1227112-113452

Linköping University

6. Jannesson, Ann. Redesign of Steam Strainer.

Degree: Management and Engineering, 2008, Linköping University

URL: http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-10534

►

This thesis was done at Siemens Industrial Turbomachinery AB in Finspång. Placed in the inlet to a steam turbine is a filter, a steam… (more)

▼

This thesis was done at Siemens Industrial Turbomachinery AB in Finspång. Placed in the inlet to a steam turbine is a filter, a steam strainer, which separates particles and larger objects from the steam. These particles and objects will cause solid particle erosion in the actual turbine if they pass by. The strainer is exposed to large pressure drops when clogged, i.e., static loads which require a good creep resistance in the material. The temperature of the steam in the turbines is increased in order to deliver more energy; today’s turbines are dimensioned for almost 600°C. The material in parameters, such as the strainer, should also be adjusted to the higher temperatures. Today’s temperature is suspected to be the cause of damage in the strainer because the present material might get brittle at higher temperatures. The purpose of the thesis is to find a new material for the strainers and also to find a new concept for how to manufacture them. There are nine sizes of steam strainers but only five of them are exposed to the highest temperatures and pressure drops, which make only these five interesting to examine in this thesis. The concepts were chosen according to the method of Ulf Liedholm (1999), Systematic Concept Development. The thesis did not end up with only one concept because not all possible methods were tested but the suggestions are all based on a strainer built out of membranes as before. The discussed methods to join the membranes are EB-welding, laser welding and brazing. An investigation to find if it was possible to improve the strength of the strainer by simple design changes and a calculation of what percentage of clogging the strainer would hold for was also done. The chosen material was a creep resistant, alloy special steel. Three suggestions on concepts were presented. The improvements in strength from simple changes in design were too small and too costly but are enclosed as an appendix in this report. Calculations on the strength were done without regard taken to fatigue caused by possible vibrations, so-called high cycle fatigue. What would be interesting to do as a future work based on this thesis is, of course, to test the three manufacturing methods and evaluate them thoroughly but also to discuss other ways of improving the strength through design changes. These should be done regarding the flow. Also high cycle fatigue should be considered.

Examensarbetet utfördes i Finspång på Siemens Industrial Turbomachinery AB. I inloppet till en ångturbin sitter ett filter, en ångsil, som silar bort partiklar och större föremål från ångan. Dessa partiklar och föremål skadar turbinen genom erosion om de tillåts passera. Ångsilen i sig utsätts för stora tryckfall när den blir igensatt, vilket kräver god krypresistans i materialet. För att kunna leverera allt mer energi utvecklas ångturbiner som kan arbeta vid allt högre ångtemperaturer. De som konstrueras idag dimensioneras för närmare 600 °C. Då måste även materialet i detaljer, som silen,…

Subjects/Keywords: Steam strainer; Steam turbine; Concept development; Material choice; Manufacturing process selection; Engineering mechanics; Teknisk mekanik

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Jannesson, A. (2008). Redesign of Steam Strainer. (Thesis). Linköping University. Retrieved from http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-10534

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Jannesson, Ann. “Redesign of Steam Strainer.” 2008. Thesis, Linköping University. Accessed December 14, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-10534.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Jannesson, Ann. “Redesign of Steam Strainer.” 2008. Web. 14 Dec 2019.

Vancouver:

Jannesson A. Redesign of Steam Strainer. [Internet] [Thesis]. Linköping University; 2008. [cited 2019 Dec 14]. Available from: http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-10534.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Jannesson A. Redesign of Steam Strainer. [Thesis]. Linköping University; 2008. Available from: http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-10534

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

7. Řezníček, Jan. Návrh kotle na spalování slámy,sytá pára 143°C 3MW, a pro CZT 6MW .

Degree: 2013, Brno University of Technology

URL: http://hdl.handle.net/11012/26661

► Obsah práce je zaměřen na návrh teplárenského zdroje ve mnou zvolené lokalitě. Celé zařízení má být navrženo tak, aby byly splněny základní požadavky zadavatele. Primárním… (more)

Subjects/Keywords: teplárna; parní turbína; parní kotel; sláma; heating plant; steam turbine; steam boiler; straw

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Řezníček, J. (2013). Návrh kotle na spalování slámy,sytá pára 143°C 3MW, a pro CZT 6MW . (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/26661

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Řezníček, Jan. “Návrh kotle na spalování slámy,sytá pára 143°C 3MW, a pro CZT 6MW .” 2013. Thesis, Brno University of Technology. Accessed December 14, 2019. http://hdl.handle.net/11012/26661.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Řezníček, Jan. “Návrh kotle na spalování slámy,sytá pára 143°C 3MW, a pro CZT 6MW .” 2013. Web. 14 Dec 2019.

Vancouver:

Řezníček J. Návrh kotle na spalování slámy,sytá pára 143°C 3MW, a pro CZT 6MW . [Internet] [Thesis]. Brno University of Technology; 2013. [cited 2019 Dec 14]. Available from: http://hdl.handle.net/11012/26661.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Řezníček J. Návrh kotle na spalování slámy,sytá pára 143°C 3MW, a pro CZT 6MW . [Thesis]. Brno University of Technology; 2013. Available from: http://hdl.handle.net/11012/26661

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

8. Hrubý, Vojtěch. Teplárna na biomasu .

Degree: 2010, Brno University of Technology

URL: http://hdl.handle.net/11012/16122

► Obsahem práce je zpracovat podklady spotřeby tepla v obci Velký Karlov a za stávající centrální výtopnu navrhnout teplárnu na biomasu. Pomocí technicko-ekonomického vyhodnocení ročního provozu… (more)

Subjects/Keywords: teplárna; parní turbína; parní stroj; biomasa; heating plant; steam turbine; steam engine; biomass

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Hrubý, V. (2010). Teplárna na biomasu . (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/16122

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Hrubý, Vojtěch. “Teplárna na biomasu .” 2010. Thesis, Brno University of Technology. Accessed December 14, 2019. http://hdl.handle.net/11012/16122.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Hrubý, Vojtěch. “Teplárna na biomasu .” 2010. Web. 14 Dec 2019.

Vancouver:

Hrubý V. Teplárna na biomasu . [Internet] [Thesis]. Brno University of Technology; 2010. [cited 2019 Dec 14]. Available from: http://hdl.handle.net/11012/16122.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Hrubý V. Teplárna na biomasu . [Thesis]. Brno University of Technology; 2010. Available from: http://hdl.handle.net/11012/16122

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

University of Tennessee – Knoxville

9. Plondke, Adam Charles. Droplet Characterization in the Wake of Steam Turbine Cascades.

Degree: MS, Aerospace Engineering, 2012, University of Tennessee – Knoxville

URL: https://trace.tennessee.edu/utk_gradthes/1195

► In low-pressure steam turbines, water droplet formation on the surfaces of stationary stator blades can lead to erosion on downstream turbine blades and other… (more)

Subjects/Keywords: droplet characterization; steam turbine; steam turbine cascade; equivalent diameter; droplets; optical measurement; Energy Systems; Other Aerospace Engineering; Other Mechanical Engineering

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Plondke, A. C. (2012). Droplet Characterization in the Wake of Steam Turbine Cascades. (Thesis). University of Tennessee – Knoxville. Retrieved from https://trace.tennessee.edu/utk_gradthes/1195

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Plondke, Adam Charles. “Droplet Characterization in the Wake of Steam Turbine Cascades.” 2012. Thesis, University of Tennessee – Knoxville. Accessed December 14, 2019. https://trace.tennessee.edu/utk_gradthes/1195.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Plondke, Adam Charles. “Droplet Characterization in the Wake of Steam Turbine Cascades.” 2012. Web. 14 Dec 2019.

Vancouver:

Plondke AC. Droplet Characterization in the Wake of Steam Turbine Cascades. [Internet] [Thesis]. University of Tennessee – Knoxville; 2012. [cited 2019 Dec 14]. Available from: https://trace.tennessee.edu/utk_gradthes/1195.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Plondke AC. Droplet Characterization in the Wake of Steam Turbine Cascades. [Thesis]. University of Tennessee – Knoxville; 2012. Available from: https://trace.tennessee.edu/utk_gradthes/1195

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

10. Pokorný, Vojtěch. Zvyšování elektrické účinnosti kogeneračních jednotek .

Degree: 2013, Brno University of Technology

URL: http://hdl.handle.net/11012/26621

► Tato diplomová práce pojednává o možnostech zvyšování elektrické účinnosti kogenerační jednotky se spalovacím motorem o výkonu 800 kWe. Posouzeno je zapojení jednotky s parní turbínou,… (more)

Subjects/Keywords: Kogenerace; parní turbína; parní stroj; ORC turbína; návrh výměníku tepla; Cogeneration; steam turbine; steam engine; ORC turbine; heat exchanger design

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Pokorný, V. (2013). Zvyšování elektrické účinnosti kogeneračních jednotek . (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/26621

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Pokorný, Vojtěch. “Zvyšování elektrické účinnosti kogeneračních jednotek .” 2013. Thesis, Brno University of Technology. Accessed December 14, 2019. http://hdl.handle.net/11012/26621.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Pokorný, Vojtěch. “Zvyšování elektrické účinnosti kogeneračních jednotek .” 2013. Web. 14 Dec 2019.

Vancouver:

Pokorný V. Zvyšování elektrické účinnosti kogeneračních jednotek . [Internet] [Thesis]. Brno University of Technology; 2013. [cited 2019 Dec 14]. Available from: http://hdl.handle.net/11012/26621.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Pokorný V. Zvyšování elektrické účinnosti kogeneračních jednotek . [Thesis]. Brno University of Technology; 2013. Available from: http://hdl.handle.net/11012/26621

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

11. Řezníček, Ondřej. Kondenzační parní turbina .

Degree: 2013, Brno University of Technology

URL: http://hdl.handle.net/11012/23945

► Tématem této diplomové práce je návrh jednotělesové kondenzační parní turbíny o výkonu 50 MW na sytou páru pro jadernou elektrárnu nové generace. V práci je… (more)

Subjects/Keywords: Kondenzační parní turbína; jednotělesová turbína; sytá pára; akční lopatkování.; Condensing steam turbine; single-body turbine; saturated steam; impulse blading.

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Řezníček, O. (2013). Kondenzační parní turbina . (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/23945

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Řezníček, Ondřej. “Kondenzační parní turbina .” 2013. Thesis, Brno University of Technology. Accessed December 14, 2019. http://hdl.handle.net/11012/23945.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Řezníček, Ondřej. “Kondenzační parní turbina .” 2013. Web. 14 Dec 2019.

Vancouver:

Řezníček O. Kondenzační parní turbina . [Internet] [Thesis]. Brno University of Technology; 2013. [cited 2019 Dec 14]. Available from: http://hdl.handle.net/11012/23945.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Řezníček O. Kondenzační parní turbina . [Thesis]. Brno University of Technology; 2013. Available from: http://hdl.handle.net/11012/23945

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

12. Trněný, Bohumil. Oprava a rekonstrukce parní turbiny .

Degree: 2012, Brno University of Technology

URL: http://hdl.handle.net/11012/5368

► Obsahem této diplomové práce je návrh opravy, rekonstrukce příslušenství a instalace elektrohydraulické regulace parní turbíny. Diplomová práce je zadaná pro konkrétní případ. V úvodu práce… (more)

Subjects/Keywords: Parní turbina; elektrohydraulická regulace parní turbiny; revizní nález.; Steam turbine; electrohydraulic regulation of steam turbine; revisional report

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Trněný, B. (2012). Oprava a rekonstrukce parní turbiny . (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/5368

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Trněný, Bohumil. “Oprava a rekonstrukce parní turbiny .” 2012. Thesis, Brno University of Technology. Accessed December 14, 2019. http://hdl.handle.net/11012/5368.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Trněný, Bohumil. “Oprava a rekonstrukce parní turbiny .” 2012. Web. 14 Dec 2019.

Vancouver:

Trněný B. Oprava a rekonstrukce parní turbiny . [Internet] [Thesis]. Brno University of Technology; 2012. [cited 2019 Dec 14]. Available from: http://hdl.handle.net/11012/5368.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Trněný B. Oprava a rekonstrukce parní turbiny . [Thesis]. Brno University of Technology; 2012. Available from: http://hdl.handle.net/11012/5368

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

13. Jelínek, Tomáš. Najíždění parních turbín .

Degree: 2015, Brno University of Technology

URL: http://hdl.handle.net/11012/41614

► Tato bakalářská práce se zabývá problematikou najíždění parních turbín. V první části práce jsou obecně popsány základní postupy a principy najíždění. Ve druhé části se… (more)

Subjects/Keywords: Parní turbína; najíždění parní turbíny; teplotní namáhání; součinitel přestupu tepla; Steam turbine; steam turbine start-up; thermal stress; heat transfer coefficient

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Jelínek, T. (2015). Najíždění parních turbín . (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/41614

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Jelínek, Tomáš. “Najíždění parních turbín .” 2015. Thesis, Brno University of Technology. Accessed December 14, 2019. http://hdl.handle.net/11012/41614.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Jelínek, Tomáš. “Najíždění parních turbín .” 2015. Web. 14 Dec 2019.

Vancouver:

Jelínek T. Najíždění parních turbín . [Internet] [Thesis]. Brno University of Technology; 2015. [cited 2019 Dec 14]. Available from: http://hdl.handle.net/11012/41614.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Jelínek T. Najíždění parních turbín . [Thesis]. Brno University of Technology; 2015. Available from: http://hdl.handle.net/11012/41614

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

14. Trněný, Bohumil. Oprava parní turbiny .

Degree: 2010, Brno University of Technology

URL: http://hdl.handle.net/11012/16125

► Obsahem této bakalářské práce je revize parní turbiny u provozovatele s návrhem na její generální opravu. Jedná se o turbinu kondenzačního typu se dvěma regulovanými… (more)

Subjects/Keywords: Oprava parní turbiny Kondenzační turbina Revizní nález; Steam turbine repair Condensing turbine Revision of steam tubine

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Trněný, B. (2010). Oprava parní turbiny . (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/16125

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Trněný, Bohumil. “Oprava parní turbiny .” 2010. Thesis, Brno University of Technology. Accessed December 14, 2019. http://hdl.handle.net/11012/16125.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Trněný, Bohumil. “Oprava parní turbiny .” 2010. Web. 14 Dec 2019.

Vancouver:

Trněný B. Oprava parní turbiny . [Internet] [Thesis]. Brno University of Technology; 2010. [cited 2019 Dec 14]. Available from: http://hdl.handle.net/11012/16125.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Trněný B. Oprava parní turbiny . [Thesis]. Brno University of Technology; 2010. Available from: http://hdl.handle.net/11012/16125

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

15. Tota, Lukáš. Tepelné tubiny .

Degree: 2011, Brno University of Technology

URL: http://hdl.handle.net/11012/5532

► Bakalářská práce pojednává o tepelných turbínách. První kapitola se věnuje historii, s ohledem na stroje, které turbínám předcházely a charakteristickým problémům provázejícím výrobu turbín. Dále je… (more)

Subjects/Keywords: Parní turbína; plynová turbína; tepelný cyklus; energie; Steam turbine; gas turbine; heat cycle; energy

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Tota, L. (2011). Tepelné tubiny . (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/5532

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Tota, Lukáš. “Tepelné tubiny .” 2011. Thesis, Brno University of Technology. Accessed December 14, 2019. http://hdl.handle.net/11012/5532.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Tota, Lukáš. “Tepelné tubiny .” 2011. Web. 14 Dec 2019.

Vancouver:

Tota L. Tepelné tubiny . [Internet] [Thesis]. Brno University of Technology; 2011. [cited 2019 Dec 14]. Available from: http://hdl.handle.net/11012/5532.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Tota L. Tepelné tubiny . [Thesis]. Brno University of Technology; 2011. Available from: http://hdl.handle.net/11012/5532

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

16. Šamalík, Jakub. Parní turbina .

Degree: 2011, Brno University of Technology

URL: http://hdl.handle.net/11012/15483

► V diplomové práci je proveden termodynamický výpočet parní turbíny o zadaných parametrech. Pro zlepšení účinnosti nízkotlakového tělesa turbíny a zmenšení axiální délky rotoru nízkotlakového tělesa… (more)

Subjects/Keywords: Parní turbína; radiální stupeň; třítělesová turbína; Steam turbine; radial stage; three-casing turbine

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Šamalík, J. (2011). Parní turbina . (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/15483

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Šamalík, Jakub. “Parní turbina .” 2011. Thesis, Brno University of Technology. Accessed December 14, 2019. http://hdl.handle.net/11012/15483.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Šamalík, Jakub. “Parní turbina .” 2011. Web. 14 Dec 2019.

Vancouver:

Šamalík J. Parní turbina . [Internet] [Thesis]. Brno University of Technology; 2011. [cited 2019 Dec 14]. Available from: http://hdl.handle.net/11012/15483.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Šamalík J. Parní turbina . [Thesis]. Brno University of Technology; 2011. Available from: http://hdl.handle.net/11012/15483

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

17. Siuda, Radim. Kondenzační parní turbina .

Degree: 2014, Brno University of Technology

URL: http://hdl.handle.net/11012/32613

► Tématem diplomové práce je návrh vysokootáčkové parní turbíny s odpojitelným kondenzačním modulem a integrovanou převodovkou. Jako zdroj energie je uvažováno odpadní teplo vznikající činností vznětových… (more)

Subjects/Keywords: Parní turbína; radiální stupeň; rovnotlaká turbína; převodovka.; Steam turbine; radial stage; impulse turbine; gearbox.

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Siuda, R. (2014). Kondenzační parní turbina . (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/32613

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Siuda, Radim. “Kondenzační parní turbina .” 2014. Thesis, Brno University of Technology. Accessed December 14, 2019. http://hdl.handle.net/11012/32613.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Siuda, Radim. “Kondenzační parní turbina .” 2014. Web. 14 Dec 2019.

Vancouver:

Siuda R. Kondenzační parní turbina . [Internet] [Thesis]. Brno University of Technology; 2014. [cited 2019 Dec 14]. Available from: http://hdl.handle.net/11012/32613.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Siuda R. Kondenzační parní turbina . [Thesis]. Brno University of Technology; 2014. Available from: http://hdl.handle.net/11012/32613

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

18. Uhmann, Petr. Kogenerace v jednotkách pro termické zpracování biomasy a odpadů .

Degree: 2012, Brno University of Technology

URL: http://hdl.handle.net/11012/7866

► Diplomová práce se zabývá kogenerací v jednotkách pro termické zpracování biomasy a odpadů. Teoretická část se zabývá popisem biomasy a odpadů a jejich energetickým využitím,… (more)

Subjects/Keywords: Kogenerace; biomasa; odpad; parní turbína; spotřební charakteristika.; Cogeneration; biomass; waste; steam turbine; turbine characteristic.

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Uhmann, P. (2012). Kogenerace v jednotkách pro termické zpracování biomasy a odpadů . (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/7866

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Uhmann, Petr. “Kogenerace v jednotkách pro termické zpracování biomasy a odpadů .” 2012. Thesis, Brno University of Technology. Accessed December 14, 2019. http://hdl.handle.net/11012/7866.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Uhmann, Petr. “Kogenerace v jednotkách pro termické zpracování biomasy a odpadů .” 2012. Web. 14 Dec 2019.

Vancouver:

Uhmann P. Kogenerace v jednotkách pro termické zpracování biomasy a odpadů . [Internet] [Thesis]. Brno University of Technology; 2012. [cited 2019 Dec 14]. Available from: http://hdl.handle.net/11012/7866.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Uhmann P. Kogenerace v jednotkách pro termické zpracování biomasy a odpadů . [Thesis]. Brno University of Technology; 2012. Available from: http://hdl.handle.net/11012/7866

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

University of Oxford

19. Zhang, Luying. Rotating instability on steam turbine blades at part-load conditions.

Degree: PhD, 2013, University of Oxford

URL: http://ora.ox.ac.uk/objects/uuid:cf8ecad1-0fd2-49b7-8e28-6d00c62c173e ; http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.629485

► A computational study aimed at improving the understanding of rotating instability in the LP steam turbine last stage working under low flow rate conditions is… (more)

Subjects/Keywords: 621.1; Turbomachinery hypersonics and aerodynamics; steam turbine; LP; rotating instability

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Zhang, L. (2013). Rotating instability on steam turbine blades at part-load conditions. (Doctoral Dissertation). University of Oxford. Retrieved from http://ora.ox.ac.uk/objects/uuid:cf8ecad1-0fd2-49b7-8e28-6d00c62c173e ; http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.629485

Chicago Manual of Style (16^th Edition):

Zhang, Luying. “Rotating instability on steam turbine blades at part-load conditions.” 2013. Doctoral Dissertation, University of Oxford. Accessed December 14, 2019. http://ora.ox.ac.uk/objects/uuid:cf8ecad1-0fd2-49b7-8e28-6d00c62c173e ; http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.629485.

MLA Handbook (7^th Edition):

Zhang, Luying. “Rotating instability on steam turbine blades at part-load conditions.” 2013. Web. 14 Dec 2019.

Vancouver:

Zhang L. Rotating instability on steam turbine blades at part-load conditions. [Internet] [Doctoral dissertation]. University of Oxford; 2013. [cited 2019 Dec 14]. Available from: http://ora.ox.ac.uk/objects/uuid:cf8ecad1-0fd2-49b7-8e28-6d00c62c173e ; http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.629485.

Council of Science Editors:

Zhang L. Rotating instability on steam turbine blades at part-load conditions. [Doctoral Dissertation]. University of Oxford; 2013. Available from: http://ora.ox.ac.uk/objects/uuid:cf8ecad1-0fd2-49b7-8e28-6d00c62c173e ; http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.629485

University of Cape Town

20. Le Grange, Willie. Component development for a high fidelity transient simulation of a coal-fired power plant using Flownex SE.

Degree: MSc, Mechanical Engineering, 2018, University of Cape Town

URL: http://hdl.handle.net/11427/29863

► Large coal-fired power stations are designed to be run predominantly at full load and optimum conditions. The behaviour of plants, operating at low load and… (more)

▼ Large coal-fired power stations are designed to be run predominantly at full load and optimum conditions. The behaviour of plants, operating at low load and varying conditions, is getting more and more attention due to the introduction of variable renewable generation on the grid. Consequently, the need for a fully transient high-fidelity system based model has grown, as this will enable one to study the behaviour of plants under such non-ideal conditions. This report details the development of a feedwater heater, deaerator and turbine component for such a high-fidelity transient system model using the Flownex Simulation Environment, a onedimensional thermohydraulic network solver. The components have been modelled all with the aim of using minimal design input data. The feedwater heater component model includes transient effects and thermodynamic relations to represent aspects such as heater performance, level control and transient inertia. In determining the heat transfer characteristics, the model makes use of plant-performance data and correlates the amount of heat transfer by using the feedwater mass flow as the load indicating parameter. This approach eliminates the need for specific geometrical details to calculate the effective heat transfer area. The level control is modelled by using a level representation built from using heat exchanger design methods. The turbine component is modelled by using Fuls’ Semi-Ellipse law or the pressure drop modelling and Ray’s semi-empirical method for the efficiency modelling. The model also contains transient effects, which include thermal inertia due to the shaft and casing, and rotational inertia due to the shaft. The deaerator component is modelled by adapting the model presented by Banda, and modifying the model to work under various conditions. This involved using curve fit methods in Flownex to use input data to model the pressure drop over the main condensate valve. Each of the mentioned components was validated and verified with plant data and finally packaged into a compound component which is a component consisting of a subnetwork in Flownex. These compound components further contain design inputs which are easily accessible by the user. The component models were integrated into larger networks in which various scenarios can be run. A short transient scenario was run on the low-pressure feedwater train of a specific power station. The scenario involved a turbine trip where the bled steam valves for the heaters were closed suddenly. The speed of the valves closing was however unknown and after closing the valves in approximately 10 seconds, results agreed relatively well with plant data. This illustrated the short transient capabilities of the feedwater heater component model. The three component models (feedwater heater, turbine and deaerator) were finally integrated into a regenerative Rankine cycle and was set up using minimal design data. The boiler, condenser and condensate pump were set as boundary conditions in the network but all extraction points for the… Advisors/Committee Members: Fuls, Wim F (advisor).

Subjects/Keywords: Thermo-hydraulic model; Feedwater heater; steam turbine; deaerator; Dynamic simulation; Flownex

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Le Grange, W. (2018). Component development for a high fidelity transient simulation of a coal-fired power plant using Flownex SE. (Masters Thesis). University of Cape Town. Retrieved from http://hdl.handle.net/11427/29863

Chicago Manual of Style (16^th Edition):

Le Grange, Willie. “Component development for a high fidelity transient simulation of a coal-fired power plant using Flownex SE.” 2018. Masters Thesis, University of Cape Town. Accessed December 14, 2019. http://hdl.handle.net/11427/29863.

MLA Handbook (7^th Edition):

Le Grange, Willie. “Component development for a high fidelity transient simulation of a coal-fired power plant using Flownex SE.” 2018. Web. 14 Dec 2019.

Vancouver:

Le Grange W. Component development for a high fidelity transient simulation of a coal-fired power plant using Flownex SE. [Internet] [Masters thesis]. University of Cape Town; 2018. [cited 2019 Dec 14]. Available from: http://hdl.handle.net/11427/29863.

Council of Science Editors:

Le Grange W. Component development for a high fidelity transient simulation of a coal-fired power plant using Flownex SE. [Masters Thesis]. University of Cape Town; 2018. Available from: http://hdl.handle.net/11427/29863

Queen Mary, University of London

21. Singh, Gursharanjit. The study of the interactions between a low pressure steam turbine and axial-radial diffuser.

Degree: PhD, 2015, Queen Mary, University of London

URL: http://qmro.qmul.ac.uk/xmlui/handle/123456789/15029 ; https://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.694423

► Specific power output from a Low Pressure (LP) steam turbine can be enhanced by increasing the stage efficiency or raising its pressure ratio; both methods… (more)

Subjects/Keywords: 621.1; low pressure steam turbine; axial-radial diffuser

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Singh, G. (2015). The study of the interactions between a low pressure steam turbine and axial-radial diffuser. (Doctoral Dissertation). Queen Mary, University of London. Retrieved from http://qmro.qmul.ac.uk/xmlui/handle/123456789/15029 ; https://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.694423

Chicago Manual of Style (16^th Edition):

Singh, Gursharanjit. “The study of the interactions between a low pressure steam turbine and axial-radial diffuser.” 2015. Doctoral Dissertation, Queen Mary, University of London. Accessed December 14, 2019. http://qmro.qmul.ac.uk/xmlui/handle/123456789/15029 ; https://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.694423.

MLA Handbook (7^th Edition):

Singh, Gursharanjit. “The study of the interactions between a low pressure steam turbine and axial-radial diffuser.” 2015. Web. 14 Dec 2019.

Vancouver:

Singh G. The study of the interactions between a low pressure steam turbine and axial-radial diffuser. [Internet] [Doctoral dissertation]. Queen Mary, University of London; 2015. [cited 2019 Dec 14]. Available from: http://qmro.qmul.ac.uk/xmlui/handle/123456789/15029 ; https://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.694423.

Council of Science Editors:

Singh G. The study of the interactions between a low pressure steam turbine and axial-radial diffuser. [Doctoral Dissertation]. Queen Mary, University of London; 2015. Available from: http://qmro.qmul.ac.uk/xmlui/handle/123456789/15029 ; https://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.694423

KTH

22. Calianno, Luca. SENSITIVITY STUDIES ON THE THERMAL MODEL OF A SOLAR STEAM TURBINE.

Degree: Heat and Power Technology, 2016, KTH

URL: http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-193017

► In the past, steam turbines were mostly used for base load operation. Nowadays, with the increased development of variable renewable technologies, these same steam… (more)

▼ In the past, steam turbines were mostly used for base load operation. Nowadays, with the increased development of variable renewable technologies, these same steam turbines are withstanding higher cyclic operational regimes with more frequent start-ups and fast changing loads. As such, improving the operational flexibility of installed and future designed steam turbines is a key aspect to be considered by equipment manufacturers. Steam turbine start-up is a phase of particular interest since is considered to be the most intricate of transient operations. During this phase, the machine can potentially be subjected to excessive thermal stresses and axial rubbing due to differential thermal expansion. These two thermal phenomena either consume component lifetime or can lead to machine failure if not carefully controlled. As such, there is a balance to be considered between increasing turbine start-up speed while ensuring the safe operation and life preservation of these machines. In order to improve the transient operation of steam turbines, it becomes important to examine their thermal behavior during start-up operation. To do that, it is important to have tools able to predict the thermal response of the machine. In this thesis work the impact of different aspects and boundary conditions on the results of ST3M, a KTH in-house tool, were investigated with the aim of understanding how large was their impact on the way to capture the thermal behavior of the turbine in terms of metal temperature and differential expansion. A small industrial high pressure turbine was validated against measured data and implemented on a sensitivity study; this analysis showed that the geometrical approximation introduce errors in the results, that the use of empirical Nusselt correlations give similar results to the validated model and that the cavity assumptions have a large impact on the trend of the differential expansion. Lastly, a strategy to validate any other similar turbine to the one of the study case was proposed in order to give a guide to future works in how to validate a model and what are the most influent parameters to take care of.

Subjects/Keywords: Steam turbine; start-up; transient; differential expansion; Nusselt correlation; heat transfer.

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Calianno, L. (2016). SENSITIVITY STUDIES ON THE THERMAL MODEL OF A SOLAR STEAM TURBINE. (Thesis). KTH. Retrieved from http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-193017

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Calianno, Luca. “SENSITIVITY STUDIES ON THE THERMAL MODEL OF A SOLAR STEAM TURBINE.” 2016. Thesis, KTH. Accessed December 14, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-193017.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Calianno, Luca. “SENSITIVITY STUDIES ON THE THERMAL MODEL OF A SOLAR STEAM TURBINE.” 2016. Web. 14 Dec 2019.

Vancouver:

Calianno L. SENSITIVITY STUDIES ON THE THERMAL MODEL OF A SOLAR STEAM TURBINE. [Internet] [Thesis]. KTH; 2016. [cited 2019 Dec 14]. Available from: http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-193017.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Calianno L. SENSITIVITY STUDIES ON THE THERMAL MODEL OF A SOLAR STEAM TURBINE. [Thesis]. KTH; 2016. Available from: http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-193017

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

23. Janoštík, Milan. Návrh olejové nádrže pro turbínu SST 300 .

Degree: 2010, Brno University of Technology

URL: http://hdl.handle.net/11012/15834

► Diplomová práce se zabývá návrhem olejového rámu pro turbíny SST 300 podle vzoru SST 400. Tato práce je rozdělena do několika bloků. V úvodu diplomové… (more)

Subjects/Keywords: Olejové hospodářství; Siemens; parní turbíny; Oil systém; Siemens; steam turbine

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Janoštík, M. (2010). Návrh olejové nádrže pro turbínu SST 300 . (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/15834

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Janoštík, Milan. “Návrh olejové nádrže pro turbínu SST 300 .” 2010. Thesis, Brno University of Technology. Accessed December 14, 2019. http://hdl.handle.net/11012/15834.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Janoštík, Milan. “Návrh olejové nádrže pro turbínu SST 300 .” 2010. Web. 14 Dec 2019.

Vancouver:

Janoštík M. Návrh olejové nádrže pro turbínu SST 300 . [Internet] [Thesis]. Brno University of Technology; 2010. [cited 2019 Dec 14]. Available from: http://hdl.handle.net/11012/15834.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Janoštík M. Návrh olejové nádrže pro turbínu SST 300 . [Thesis]. Brno University of Technology; 2010. Available from: http://hdl.handle.net/11012/15834

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

24. Merta, Libor. Parní turbina protitlaková .

Degree: 2012, Brno University of Technology

URL: http://hdl.handle.net/11012/12784

► Předmětem diplomové práce je návrh protitlaké turbíny bez odběrů. Základem diplomové práce je návrh termodynamického výpočtu jednotlivých částí turbíny. V závislosti na zadaných parametrech páry… (more)

Subjects/Keywords: Protitlaká parní turbína; termodynamický výpočet; Backpressure steam turbine; thermodynamical calculation

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Merta, L. (2012). Parní turbina protitlaková . (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/12784

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Merta, Libor. “Parní turbina protitlaková .” 2012. Thesis, Brno University of Technology. Accessed December 14, 2019. http://hdl.handle.net/11012/12784.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Merta, Libor. “Parní turbina protitlaková .” 2012. Web. 14 Dec 2019.

Vancouver:

Merta L. Parní turbina protitlaková . [Internet] [Thesis]. Brno University of Technology; 2012. [cited 2019 Dec 14]. Available from: http://hdl.handle.net/11012/12784.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Merta L. Parní turbina protitlaková . [Thesis]. Brno University of Technology; 2012. Available from: http://hdl.handle.net/11012/12784

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

25. Veselý, Petr. Návrh turbíny do kombinovaného cyklu .

Degree: 2017, Brno University of Technology

URL: http://hdl.handle.net/11012/67997

► Diplomová práce se zabývá parní turbínou v kombinovaném cyklu. Práce obsahuje čtyři základní části. Na začátku je popsána historie paroplynových oběhů. Druhá část se věnuje… (more)

Subjects/Keywords: Kotel na odpadní teplo; HRSG; dvoutlakový; kondenzační turbína; kombinovaný cyklus; parní turbína.; Heat recovery steam generator; HRSG; two pressure levels; condensing turbine; gas–steam cycle; steam turbine.

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Veselý, P. (2017). Návrh turbíny do kombinovaného cyklu . (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/67997

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Veselý, Petr. “Návrh turbíny do kombinovaného cyklu .” 2017. Thesis, Brno University of Technology. Accessed December 14, 2019. http://hdl.handle.net/11012/67997.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Veselý, Petr. “Návrh turbíny do kombinovaného cyklu .” 2017. Web. 14 Dec 2019.

Vancouver:

Veselý P. Návrh turbíny do kombinovaného cyklu . [Internet] [Thesis]. Brno University of Technology; 2017. [cited 2019 Dec 14]. Available from: http://hdl.handle.net/11012/67997.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Veselý P. Návrh turbíny do kombinovaného cyklu . [Thesis]. Brno University of Technology; 2017. Available from: http://hdl.handle.net/11012/67997

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

26. Susna, David. Jednostupňová parní turbína .

Degree: 2016, Brno University of Technology

URL: http://hdl.handle.net/11012/60981

► Bakalářská práce se zabývá návrhem protitlakové jednostupňové parní turbíny. Tato turbína je navržena pro zpracování technologické páry v chemickém závodě. Cílem práce je navrhnout turbínu… (more)

Subjects/Keywords: Jednostupňová parní turbína; točivá redukce; protitlaková turbína; Curtisův stupeň; přehřátá pára; rovnotlaké lopatkování; single-stage steam turbine; rotating steam reduction system; back-pressure turbine; Curtis stage; superheated steam; impulse blading

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Susna, D. (2016). Jednostupňová parní turbína . (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/60981

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Susna, David. “Jednostupňová parní turbína .” 2016. Thesis, Brno University of Technology. Accessed December 14, 2019. http://hdl.handle.net/11012/60981.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Susna, David. “Jednostupňová parní turbína .” 2016. Web. 14 Dec 2019.

Vancouver:

Susna D. Jednostupňová parní turbína . [Internet] [Thesis]. Brno University of Technology; 2016. [cited 2019 Dec 14]. Available from: http://hdl.handle.net/11012/60981.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Susna D. Jednostupňová parní turbína . [Thesis]. Brno University of Technology; 2016. Available from: http://hdl.handle.net/11012/60981

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

27. Veleba, Lukáš. Parní turbína o výkonu 300 MW .

Degree: 2018, Brno University of Technology

URL: http://hdl.handle.net/11012/82641

► Diplomová práce na téma Parní turbína o výkonu 300 MW obsahuje návrh turbosoustrojí pro parní část paroplynového cyklu. Je zpracován výpočet tepelného cyklu a termodynamický… (more)

Subjects/Keywords: Parní turbína; paroplynový cyklus; tepelné schéma; termodynamický výpočet; pevnostní výpočet; Steam turbine; gas-steam cycle; thermal cycle; thermodynamic calculation; strength calculation

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Veleba, L. (2018). Parní turbína o výkonu 300 MW . (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/82641

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Veleba, Lukáš. “Parní turbína o výkonu 300 MW .” 2018. Thesis, Brno University of Technology. Accessed December 14, 2019. http://hdl.handle.net/11012/82641.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Veleba, Lukáš. “Parní turbína o výkonu 300 MW .” 2018. Web. 14 Dec 2019.

Vancouver:

Veleba L. Parní turbína o výkonu 300 MW . [Internet] [Thesis]. Brno University of Technology; 2018. [cited 2019 Dec 14]. Available from: http://hdl.handle.net/11012/82641.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Veleba L. Parní turbína o výkonu 300 MW . [Thesis]. Brno University of Technology; 2018. Available from: http://hdl.handle.net/11012/82641

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

28. Skala, Šimon. Systém ucpávkové páry pro parní turbínu .

Degree: 2017, Brno University of Technology

URL: http://hdl.handle.net/11012/66607

► Diplomová práce se zabývá předběžným návrhem kondenzační parní turbíny se třemi ne-regulovanými odběry a návrhem i popisem jejího systému ucpávkové páry. Parametry páry v klíčových… (more)

Subjects/Keywords: Parní kondenzační turbína; tepelné schéma; termodynamický výpočet; systém ucpávkové páry.; Condensing steam turbine; heat balance; thermodynamic calculation; gland steam system.

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Skala, �. (2017). Systém ucpávkové páry pro parní turbínu . (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/66607

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Skala, Šimon. “Systém ucpávkové páry pro parní turbínu .” 2017. Thesis, Brno University of Technology. Accessed December 14, 2019. http://hdl.handle.net/11012/66607.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Skala, Šimon. “Systém ucpávkové páry pro parní turbínu .” 2017. Web. 14 Dec 2019.

Vancouver:

Skala �. Systém ucpávkové páry pro parní turbínu . [Internet] [Thesis]. Brno University of Technology; 2017. [cited 2019 Dec 14]. Available from: http://hdl.handle.net/11012/66607.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Skala �. Systém ucpávkové páry pro parní turbínu . [Thesis]. Brno University of Technology; 2017. Available from: http://hdl.handle.net/11012/66607

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

29. Vaněček, Lukáš. Výpočet parametrů sekundárního okruhu jaderné elektrárny .

Degree: 2011, Brno University of Technology

URL: http://hdl.handle.net/11012/7653

► Obsahem práce je návrh výpočtu a následný výpočet parametrů sekundárního okruhu jaderné elektrárny pro zadané tepelné schéma a zadané parametry jaderné elektrárny. Současně jsou v… (more)

▼ Obsahem práce je návrh výpočtu a následný výpočet parametrů sekundárního okruhu jaderné elektrárny pro zadané tepelné schéma a zadané parametry jaderné elektrárny. Současně jsou v práci uvedeny oběhy některých typů jaderných elektráren. V první části práce jsou stručně popsány možnosti provedení oběhů jaderných elektráren, typy jaderných energetických reaktorů, parních generátorů a turbín používaných v jaderných elektrárnách. Další část práce obsahuje návrh výpočtu pro konkrétní tepelné schéma sekundárního okruhu jaderné elektrárny. V návrhu výpočtu je věnována pozornost expanzi páry v turbíně, stanovení parametrů pracovní látky v oběhu, výpočtu potřebného množství páry, stanovení účinností a výkonů jaderné elektrárny. V závěrečné části je uveden vlastní výpočet parametrů sekundárního okruhu jaderné elektrárny pro zadané hodnoty a zhodnocení vypočtených hodnot.; The contents of this thesis is a suggestion of calculation and follow-up calculation of parameters of secondary circuit of assigned thermal diagram and parameters of a nuclear power plant. The thesis also includes possibilities of making nuclear circulations. Part one of the thesis briefly describes possibilities of making nuclear circulations, types of nuclear energy reactors, types of steam generators and types of turbines used in nuclear power plants. The second part of the thesis includes a suggestion of calculation for the real thermal diagram of secondary circuit of nuclear power plant. The attention in this calculation is given to expansion of steam in a turbine, determining parameters of mass in a circuit, calculation of steam demanded and determining power and efficiency of nuclear power plant. The final part of the thesis is a calculation of parameters of secondary circuit of nuclear power plant for given values and evaluation of results of calculation. Advisors/Committee Members: Raček, Jiří (advisor).

Subjects/Keywords: jaderná elektrárna; energetický reaktor; parní generátor; parní turbína; sekundární okruh.; nuclear power plant; power reactor; steam generator; steam turbine; secondary circuit.

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Vaněček, L. (2011). Výpočet parametrů sekundárního okruhu jaderné elektrárny . (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/7653

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Vaněček, Lukáš. “Výpočet parametrů sekundárního okruhu jaderné elektrárny .” 2011. Thesis, Brno University of Technology. Accessed December 14, 2019. http://hdl.handle.net/11012/7653.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Vaněček, Lukáš. “Výpočet parametrů sekundárního okruhu jaderné elektrárny .” 2011. Web. 14 Dec 2019.

Vancouver:

Vaněček L. Výpočet parametrů sekundárního okruhu jaderné elektrárny . [Internet] [Thesis]. Brno University of Technology; 2011. [cited 2019 Dec 14]. Available from: http://hdl.handle.net/11012/7653.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Vaněček L. Výpočet parametrů sekundárního okruhu jaderné elektrárny . [Thesis]. Brno University of Technology; 2011. Available from: http://hdl.handle.net/11012/7653

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Brno University of Technology

30. Šabacký, Filip. Poslední stupeň parní turbiny .

Degree: 2010, Brno University of Technology

URL: http://hdl.handle.net/11012/16163

► Diplomová práce se zabývá předběžným výpočtem parní kondenzační turbíny na středním průměru lopatkování. Regulační stupeň je řešen jako A-kolo rovnotlaký stupeň. Mnohastupňové lopatkování je řešeno… (more)

Subjects/Keywords: parní turbína; poslední stupeň; zkrucovaná lopatka; mokrá pára; konstantní cirkulace okolo profilu; steam turbine; last stage; twisted blade; wet steam

Record Details Similar Records Cite « Share

❌

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6^th Edition):

Šabacký, F. (2010). Poslední stupeň parní turbiny . (Thesis). Brno University of Technology. Retrieved from http://hdl.handle.net/11012/16163

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Chicago Manual of Style (16^th Edition):

Šabacký, Filip. “Poslední stupeň parní turbiny .” 2010. Thesis, Brno University of Technology. Accessed December 14, 2019. http://hdl.handle.net/11012/16163.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

MLA Handbook (7^th Edition):

Šabacký, Filip. “Poslední stupeň parní turbiny .” 2010. Web. 14 Dec 2019.

Vancouver:

Šabacký F. Poslední stupeň parní turbiny . [Internet] [Thesis]. Brno University of Technology; 2010. [cited 2019 Dec 14]. Available from: http://hdl.handle.net/11012/16163.

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Council of Science Editors:

Šabacký F. Poslední stupeň parní turbiny . [Thesis]. Brno University of Technology; 2010. Available from: http://hdl.handle.net/11012/16163

Note: this citation may be lacking information needed for this citation format:
Not specified: Masters Thesis or Doctoral Dissertation

Open Access Theses and Dissertations