Advanced search options

Advanced Search Options 🞨

Browse by author name (“Author name starts with…”).

Find ETDs with:

in
/  
in
/  
in
/  
in

Written in Published in Earliest date Latest date

Sorted by

Results per page:

Sorted by: relevance · author · university · dateNew search

You searched for +publisher:"Georgia Tech" +contributor:("Kurfess, Thomas"). Showing records 1 – 30 of 55 total matches.

[1] [2]

Search Limiters

Last 2 Years | English Only

Degrees

Levels

▼ Search Limiters


Georgia Tech

1. Nguyen, Vinh. Dynamic PVDF sensor based monitoring of single point cutting processes.

Degree: MS, Mechanical Engineering, 2016, Georgia Tech

 A low-cost, high fidelity measurement system consisting of a thin film Polyvinylidene Fluoride (PVDF) piezoelectric strain rosette and data logging electronics has been designed, fabricated,… (more)

Subjects/Keywords: PVDF; Machining; Single-point cutting; Signal processing; Vibrations; Piezoelectricity

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Nguyen, V. (2016). Dynamic PVDF sensor based monitoring of single point cutting processes. (Masters Thesis). Georgia Tech. Retrieved from http://hdl.handle.net/1853/59131

Chicago Manual of Style (16th Edition):

Nguyen, Vinh. “Dynamic PVDF sensor based monitoring of single point cutting processes.” 2016. Masters Thesis, Georgia Tech. Accessed February 26, 2020. http://hdl.handle.net/1853/59131.

MLA Handbook (7th Edition):

Nguyen, Vinh. “Dynamic PVDF sensor based monitoring of single point cutting processes.” 2016. Web. 26 Feb 2020.

Vancouver:

Nguyen V. Dynamic PVDF sensor based monitoring of single point cutting processes. [Internet] [Masters thesis]. Georgia Tech; 2016. [cited 2020 Feb 26]. Available from: http://hdl.handle.net/1853/59131.

Council of Science Editors:

Nguyen V. Dynamic PVDF sensor based monitoring of single point cutting processes. [Masters Thesis]. Georgia Tech; 2016. Available from: http://hdl.handle.net/1853/59131


Georgia Tech

2. Qiao, Haipeng. Understanding subsurface integrity in machining of cellular solids.

Degree: MS, Mechanical Engineering, 2017, Georgia Tech

 Thermomechanical loading during surface severe plastic deformation in machining is marked by the generation of high and graded strains, strain rates and temperatures in bulk… (more)

Subjects/Keywords: Foams; Cellular solid; Tomography; Digital volume correlation; Watershed segmentation

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Qiao, H. (2017). Understanding subsurface integrity in machining of cellular solids. (Masters Thesis). Georgia Tech. Retrieved from http://hdl.handle.net/1853/60178

Chicago Manual of Style (16th Edition):

Qiao, Haipeng. “Understanding subsurface integrity in machining of cellular solids.” 2017. Masters Thesis, Georgia Tech. Accessed February 26, 2020. http://hdl.handle.net/1853/60178.

MLA Handbook (7th Edition):

Qiao, Haipeng. “Understanding subsurface integrity in machining of cellular solids.” 2017. Web. 26 Feb 2020.

Vancouver:

Qiao H. Understanding subsurface integrity in machining of cellular solids. [Internet] [Masters thesis]. Georgia Tech; 2017. [cited 2020 Feb 26]. Available from: http://hdl.handle.net/1853/60178.

Council of Science Editors:

Qiao H. Understanding subsurface integrity in machining of cellular solids. [Masters Thesis]. Georgia Tech; 2017. Available from: http://hdl.handle.net/1853/60178


Georgia Tech

3. Carlile, Andrew. Water risk analyses and strategy for automotive manufacturing.

Degree: MS, Mechanical Engineering, 2015, Georgia Tech

 The availability of clean fresh water is an issue in many parts of the world. The water use by companies to perform their operations has… (more)

Subjects/Keywords: Water; Manufacturing; Indirect water; Water strategy; Automotive

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Carlile, A. (2015). Water risk analyses and strategy for automotive manufacturing. (Masters Thesis). Georgia Tech. Retrieved from http://hdl.handle.net/1853/60399

Chicago Manual of Style (16th Edition):

Carlile, Andrew. “Water risk analyses and strategy for automotive manufacturing.” 2015. Masters Thesis, Georgia Tech. Accessed February 26, 2020. http://hdl.handle.net/1853/60399.

MLA Handbook (7th Edition):

Carlile, Andrew. “Water risk analyses and strategy for automotive manufacturing.” 2015. Web. 26 Feb 2020.

Vancouver:

Carlile A. Water risk analyses and strategy for automotive manufacturing. [Internet] [Masters thesis]. Georgia Tech; 2015. [cited 2020 Feb 26]. Available from: http://hdl.handle.net/1853/60399.

Council of Science Editors:

Carlile A. Water risk analyses and strategy for automotive manufacturing. [Masters Thesis]. Georgia Tech; 2015. Available from: http://hdl.handle.net/1853/60399


Georgia Tech

4. Evert, Andrew James. Applications for sensor fusion in vertical transportation.

Degree: MS, Mechanical Engineering, 2018, Georgia Tech

 The elevator industry is growing and evolving rapidly after a century and a half of relatively little change. Buildings are growing taller every day and… (more)

Subjects/Keywords: Elevator; Sensor fusion; Dempster shafer; Kalman filter; Industry 4.0

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Evert, A. J. (2018). Applications for sensor fusion in vertical transportation. (Masters Thesis). Georgia Tech. Retrieved from http://hdl.handle.net/1853/60264

Chicago Manual of Style (16th Edition):

Evert, Andrew James. “Applications for sensor fusion in vertical transportation.” 2018. Masters Thesis, Georgia Tech. Accessed February 26, 2020. http://hdl.handle.net/1853/60264.

MLA Handbook (7th Edition):

Evert, Andrew James. “Applications for sensor fusion in vertical transportation.” 2018. Web. 26 Feb 2020.

Vancouver:

Evert AJ. Applications for sensor fusion in vertical transportation. [Internet] [Masters thesis]. Georgia Tech; 2018. [cited 2020 Feb 26]. Available from: http://hdl.handle.net/1853/60264.

Council of Science Editors:

Evert AJ. Applications for sensor fusion in vertical transportation. [Masters Thesis]. Georgia Tech; 2018. Available from: http://hdl.handle.net/1853/60264


Georgia Tech

5. Ameur, Amir. Voxel-based tool sequence optimization for 5-axis machining using high performance computing.

Degree: MS, Mechanical Engineering, 2017, Georgia Tech

 This thesis presents an approach for tool sequence optimization in the case of 5-axis machining. Most of the reported work suggests tooling optimization methods involving… (more)

Subjects/Keywords: Voxels; GPU; 5-axis machining; Tool selection

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Ameur, A. (2017). Voxel-based tool sequence optimization for 5-axis machining using high performance computing. (Masters Thesis). Georgia Tech. Retrieved from http://hdl.handle.net/1853/60655

Chicago Manual of Style (16th Edition):

Ameur, Amir. “Voxel-based tool sequence optimization for 5-axis machining using high performance computing.” 2017. Masters Thesis, Georgia Tech. Accessed February 26, 2020. http://hdl.handle.net/1853/60655.

MLA Handbook (7th Edition):

Ameur, Amir. “Voxel-based tool sequence optimization for 5-axis machining using high performance computing.” 2017. Web. 26 Feb 2020.

Vancouver:

Ameur A. Voxel-based tool sequence optimization for 5-axis machining using high performance computing. [Internet] [Masters thesis]. Georgia Tech; 2017. [cited 2020 Feb 26]. Available from: http://hdl.handle.net/1853/60655.

Council of Science Editors:

Ameur A. Voxel-based tool sequence optimization for 5-axis machining using high performance computing. [Masters Thesis]. Georgia Tech; 2017. Available from: http://hdl.handle.net/1853/60655


Georgia Tech

6. Louhichi, Wafa. AUTOMATED SURFACE FINISH INSPECTION USING CONVOLUTIONAL NEURAL NETWORKS.

Degree: MS, Computational Science and Engineering, 2019, Georgia Tech

 The surface finish of a machined part has an important effect on friction, wear, and aesthetics. The surface finish became a critical quality measure since… (more)

Subjects/Keywords: Automated Surface Finish Inspection; Android App for Surface Finish Inspection

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Louhichi, W. (2019). AUTOMATED SURFACE FINISH INSPECTION USING CONVOLUTIONAL NEURAL NETWORKS. (Masters Thesis). Georgia Tech. Retrieved from http://hdl.handle.net/1853/61241

Chicago Manual of Style (16th Edition):

Louhichi, Wafa. “AUTOMATED SURFACE FINISH INSPECTION USING CONVOLUTIONAL NEURAL NETWORKS.” 2019. Masters Thesis, Georgia Tech. Accessed February 26, 2020. http://hdl.handle.net/1853/61241.

MLA Handbook (7th Edition):

Louhichi, Wafa. “AUTOMATED SURFACE FINISH INSPECTION USING CONVOLUTIONAL NEURAL NETWORKS.” 2019. Web. 26 Feb 2020.

Vancouver:

Louhichi W. AUTOMATED SURFACE FINISH INSPECTION USING CONVOLUTIONAL NEURAL NETWORKS. [Internet] [Masters thesis]. Georgia Tech; 2019. [cited 2020 Feb 26]. Available from: http://hdl.handle.net/1853/61241.

Council of Science Editors:

Louhichi W. AUTOMATED SURFACE FINISH INSPECTION USING CONVOLUTIONAL NEURAL NETWORKS. [Masters Thesis]. Georgia Tech; 2019. Available from: http://hdl.handle.net/1853/61241


Georgia Tech

7. Silberglied, Chelsea. Extruder Dynamics and Control in Large Scale Additive Manufacturing.

Degree: MS, Mechanical Engineering, 2018, Georgia Tech

 In Large Scale Additive Manufacturing, there are many part defects, such as bulging at corners and improper part seams that arise due to a lack… (more)

Subjects/Keywords: Large Scale Additive Manufacturing; Big Area Additive Manufacturing; Additive

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Silberglied, C. (2018). Extruder Dynamics and Control in Large Scale Additive Manufacturing. (Masters Thesis). Georgia Tech. Retrieved from http://hdl.handle.net/1853/62249

Chicago Manual of Style (16th Edition):

Silberglied, Chelsea. “Extruder Dynamics and Control in Large Scale Additive Manufacturing.” 2018. Masters Thesis, Georgia Tech. Accessed February 26, 2020. http://hdl.handle.net/1853/62249.

MLA Handbook (7th Edition):

Silberglied, Chelsea. “Extruder Dynamics and Control in Large Scale Additive Manufacturing.” 2018. Web. 26 Feb 2020.

Vancouver:

Silberglied C. Extruder Dynamics and Control in Large Scale Additive Manufacturing. [Internet] [Masters thesis]. Georgia Tech; 2018. [cited 2020 Feb 26]. Available from: http://hdl.handle.net/1853/62249.

Council of Science Editors:

Silberglied C. Extruder Dynamics and Control in Large Scale Additive Manufacturing. [Masters Thesis]. Georgia Tech; 2018. Available from: http://hdl.handle.net/1853/62249


Georgia Tech

8. Williams, Kyle. Open Source CNC Control with CAM and Digital Twin Integration.

Degree: MS, Mechanical Engineering, 2019, Georgia Tech

 High bandwidth internet connectivity and ubiquitous computation are poised to enable automated quality assurance, high efficiency predictive maintenance and an integrated logistic support infrastructure for… (more)

Subjects/Keywords: CNC; G Code; Open Source; CAM; Digital Twin; Smart Manufacturing

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Williams, K. (2019). Open Source CNC Control with CAM and Digital Twin Integration. (Masters Thesis). Georgia Tech. Retrieved from http://hdl.handle.net/1853/62352

Chicago Manual of Style (16th Edition):

Williams, Kyle. “Open Source CNC Control with CAM and Digital Twin Integration.” 2019. Masters Thesis, Georgia Tech. Accessed February 26, 2020. http://hdl.handle.net/1853/62352.

MLA Handbook (7th Edition):

Williams, Kyle. “Open Source CNC Control with CAM and Digital Twin Integration.” 2019. Web. 26 Feb 2020.

Vancouver:

Williams K. Open Source CNC Control with CAM and Digital Twin Integration. [Internet] [Masters thesis]. Georgia Tech; 2019. [cited 2020 Feb 26]. Available from: http://hdl.handle.net/1853/62352.

Council of Science Editors:

Williams K. Open Source CNC Control with CAM and Digital Twin Integration. [Masters Thesis]. Georgia Tech; 2019. Available from: http://hdl.handle.net/1853/62352


Georgia Tech

9. Hossain, Mohammad Moazzem. Voxel-based offsetting at high resolution with tunable speed and precision using hybrid dynamic trees.

Degree: PhD, Computational Science and Engineering, 2016, Georgia Tech

 In the recent years, digital manufacturing has experienced the wave of rapid prototyping through the innovation and ubiquity in 3D printing technology. While such advancement… (more)

Subjects/Keywords: GPGPU acceleration; Hybrid dynamic tree; Offset surface; Octree; High-resolution Voxel modeling; Digital manufacturing; CNC machining

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Hossain, M. M. (2016). Voxel-based offsetting at high resolution with tunable speed and precision using hybrid dynamic trees. (Doctoral Dissertation). Georgia Tech. Retrieved from http://hdl.handle.net/1853/56305

Chicago Manual of Style (16th Edition):

Hossain, Mohammad Moazzem. “Voxel-based offsetting at high resolution with tunable speed and precision using hybrid dynamic trees.” 2016. Doctoral Dissertation, Georgia Tech. Accessed February 26, 2020. http://hdl.handle.net/1853/56305.

MLA Handbook (7th Edition):

Hossain, Mohammad Moazzem. “Voxel-based offsetting at high resolution with tunable speed and precision using hybrid dynamic trees.” 2016. Web. 26 Feb 2020.

Vancouver:

Hossain MM. Voxel-based offsetting at high resolution with tunable speed and precision using hybrid dynamic trees. [Internet] [Doctoral dissertation]. Georgia Tech; 2016. [cited 2020 Feb 26]. Available from: http://hdl.handle.net/1853/56305.

Council of Science Editors:

Hossain MM. Voxel-based offsetting at high resolution with tunable speed and precision using hybrid dynamic trees. [Doctoral Dissertation]. Georgia Tech; 2016. Available from: http://hdl.handle.net/1853/56305


Georgia Tech

10. Humphreys, Heather. Caregiver-machine collaborative manipulation with an advanced hydraulically actuated patient transfer assist device.

Degree: PhD, Mechanical Engineering, 2016, Georgia Tech

 A significant need has been identified for an improved device to assist in transferring mobility limited patients, particularly those who are heavier or bariatric. Typical… (more)

Subjects/Keywords: Interaction control; Direct drive hydraulics; Human-machine interface design; Compliant control; System dynamics

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Humphreys, H. (2016). Caregiver-machine collaborative manipulation with an advanced hydraulically actuated patient transfer assist device. (Doctoral Dissertation). Georgia Tech. Retrieved from http://hdl.handle.net/1853/59132

Chicago Manual of Style (16th Edition):

Humphreys, Heather. “Caregiver-machine collaborative manipulation with an advanced hydraulically actuated patient transfer assist device.” 2016. Doctoral Dissertation, Georgia Tech. Accessed February 26, 2020. http://hdl.handle.net/1853/59132.

MLA Handbook (7th Edition):

Humphreys, Heather. “Caregiver-machine collaborative manipulation with an advanced hydraulically actuated patient transfer assist device.” 2016. Web. 26 Feb 2020.

Vancouver:

Humphreys H. Caregiver-machine collaborative manipulation with an advanced hydraulically actuated patient transfer assist device. [Internet] [Doctoral dissertation]. Georgia Tech; 2016. [cited 2020 Feb 26]. Available from: http://hdl.handle.net/1853/59132.

Council of Science Editors:

Humphreys H. Caregiver-machine collaborative manipulation with an advanced hydraulically actuated patient transfer assist device. [Doctoral Dissertation]. Georgia Tech; 2016. Available from: http://hdl.handle.net/1853/59132


Georgia Tech

11. Lynn, David Roby. Direct Servo Control of Positional Derivatives for 5-Axis CNC Machine Tools Using Densely-Sampled Toolpaths.

Degree: PhD, Mechanical Engineering, 2019, Georgia Tech

 Ever-increasing quality and complexity requirements for machined parts have led to the development of computer-numerical control (CNC) machine tools with high numbers of servo axes… (more)

Subjects/Keywords: machining; CNC; motion control; voxel; computer-aided manufacturing; GPU

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Lynn, D. R. (2019). Direct Servo Control of Positional Derivatives for 5-Axis CNC Machine Tools Using Densely-Sampled Toolpaths. (Doctoral Dissertation). Georgia Tech. Retrieved from http://hdl.handle.net/1853/61223

Chicago Manual of Style (16th Edition):

Lynn, David Roby. “Direct Servo Control of Positional Derivatives for 5-Axis CNC Machine Tools Using Densely-Sampled Toolpaths.” 2019. Doctoral Dissertation, Georgia Tech. Accessed February 26, 2020. http://hdl.handle.net/1853/61223.

MLA Handbook (7th Edition):

Lynn, David Roby. “Direct Servo Control of Positional Derivatives for 5-Axis CNC Machine Tools Using Densely-Sampled Toolpaths.” 2019. Web. 26 Feb 2020.

Vancouver:

Lynn DR. Direct Servo Control of Positional Derivatives for 5-Axis CNC Machine Tools Using Densely-Sampled Toolpaths. [Internet] [Doctoral dissertation]. Georgia Tech; 2019. [cited 2020 Feb 26]. Available from: http://hdl.handle.net/1853/61223.

Council of Science Editors:

Lynn DR. Direct Servo Control of Positional Derivatives for 5-Axis CNC Machine Tools Using Densely-Sampled Toolpaths. [Doctoral Dissertation]. Georgia Tech; 2019. Available from: http://hdl.handle.net/1853/61223


Georgia Tech

12. Wang, Zhiyu. Gradient Microstructure Control in Deformation-Based Surface Generation.

Degree: PhD, Mechanical Engineering, 2018, Georgia Tech

 Fabrication of surface gradient microstructure by surface severe plastic deformation (S2PD) has been shown as an effective process to enhance functional performance and extend the… (more)

Subjects/Keywords: Gradient Material; Severe Plastic Deformation; Microstructure Evolution

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Wang, Z. (2018). Gradient Microstructure Control in Deformation-Based Surface Generation. (Doctoral Dissertation). Georgia Tech. Retrieved from http://hdl.handle.net/1853/61648

Chicago Manual of Style (16th Edition):

Wang, Zhiyu. “Gradient Microstructure Control in Deformation-Based Surface Generation.” 2018. Doctoral Dissertation, Georgia Tech. Accessed February 26, 2020. http://hdl.handle.net/1853/61648.

MLA Handbook (7th Edition):

Wang, Zhiyu. “Gradient Microstructure Control in Deformation-Based Surface Generation.” 2018. Web. 26 Feb 2020.

Vancouver:

Wang Z. Gradient Microstructure Control in Deformation-Based Surface Generation. [Internet] [Doctoral dissertation]. Georgia Tech; 2018. [cited 2020 Feb 26]. Available from: http://hdl.handle.net/1853/61648.

Council of Science Editors:

Wang Z. Gradient Microstructure Control in Deformation-Based Surface Generation. [Doctoral Dissertation]. Georgia Tech; 2018. Available from: http://hdl.handle.net/1853/61648


Georgia Tech

13. Ning, Jinqiang. Analytical Modeling of Material Constitutive Behaviors and Process Mechanics in Precision Machining and Additive Manufacturing.

Degree: PhD, Mechanical Engineering, 2019, Georgia Tech

 Manufacturing processes, including precision machining and metal additive manufacturing, transform the raw materials into finished products with desired geometry and functionality. Physics-based analytical modeling methodology… (more)

Subjects/Keywords: Analytical modeling; Prevision machining; Additive manufacturing; Materials constitutive behaviors; Process mechanics

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Ning, J. (2019). Analytical Modeling of Material Constitutive Behaviors and Process Mechanics in Precision Machining and Additive Manufacturing. (Doctoral Dissertation). Georgia Tech. Retrieved from http://hdl.handle.net/1853/62307

Chicago Manual of Style (16th Edition):

Ning, Jinqiang. “Analytical Modeling of Material Constitutive Behaviors and Process Mechanics in Precision Machining and Additive Manufacturing.” 2019. Doctoral Dissertation, Georgia Tech. Accessed February 26, 2020. http://hdl.handle.net/1853/62307.

MLA Handbook (7th Edition):

Ning, Jinqiang. “Analytical Modeling of Material Constitutive Behaviors and Process Mechanics in Precision Machining and Additive Manufacturing.” 2019. Web. 26 Feb 2020.

Vancouver:

Ning J. Analytical Modeling of Material Constitutive Behaviors and Process Mechanics in Precision Machining and Additive Manufacturing. [Internet] [Doctoral dissertation]. Georgia Tech; 2019. [cited 2020 Feb 26]. Available from: http://hdl.handle.net/1853/62307.

Council of Science Editors:

Ning J. Analytical Modeling of Material Constitutive Behaviors and Process Mechanics in Precision Machining and Additive Manufacturing. [Doctoral Dissertation]. Georgia Tech; 2019. Available from: http://hdl.handle.net/1853/62307


Georgia Tech

14. Han, Dongmin. Slicing of Tessellated Models for Additive Manufacturing Based on Variable Thickness Layers.

Degree: PhD, Mechanical Engineering, 2019, Georgia Tech

 In contrast to machining or subtractive technologies, Additive Manufacturing (AM) is a set of technologies that fabricate a 3-D object by automatically adding material layer-by-layer.… (more)

Subjects/Keywords: slicing; variable thickness layer; tessellated model

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Han, D. (2019). Slicing of Tessellated Models for Additive Manufacturing Based on Variable Thickness Layers. (Doctoral Dissertation). Georgia Tech. Retrieved from http://hdl.handle.net/1853/62333

Chicago Manual of Style (16th Edition):

Han, Dongmin. “Slicing of Tessellated Models for Additive Manufacturing Based on Variable Thickness Layers.” 2019. Doctoral Dissertation, Georgia Tech. Accessed February 26, 2020. http://hdl.handle.net/1853/62333.

MLA Handbook (7th Edition):

Han, Dongmin. “Slicing of Tessellated Models for Additive Manufacturing Based on Variable Thickness Layers.” 2019. Web. 26 Feb 2020.

Vancouver:

Han D. Slicing of Tessellated Models for Additive Manufacturing Based on Variable Thickness Layers. [Internet] [Doctoral dissertation]. Georgia Tech; 2019. [cited 2020 Feb 26]. Available from: http://hdl.handle.net/1853/62333.

Council of Science Editors:

Han D. Slicing of Tessellated Models for Additive Manufacturing Based on Variable Thickness Layers. [Doctoral Dissertation]. Georgia Tech; 2019. Available from: http://hdl.handle.net/1853/62333


Georgia Tech

15. Parto Dezfouli, Mahmoud. AUTOMATED REAL-TIME MACHINE LEARNING FOR IOT FOR MANUFACTURING A CLOUD ARCHITECTURE AND API.

Degree: PhD, Mechanical Engineering, 2019, Georgia Tech

 Due to the recent movements in Industry 4.0 and Internet of Things (IoT), accessing or generating data in the Smart Manufacturing (SM) domain has become… (more)

Subjects/Keywords: Industry 4.0; Smart Manufacturing; Internet of Things; Architecture; Edge; Fog; Cloud; Federated Learning; Real-Time; Machine Learning; Bayesian; Stream Analytics

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Parto Dezfouli, M. (2019). AUTOMATED REAL-TIME MACHINE LEARNING FOR IOT FOR MANUFACTURING A CLOUD ARCHITECTURE AND API. (Doctoral Dissertation). Georgia Tech. Retrieved from http://hdl.handle.net/1853/62335

Chicago Manual of Style (16th Edition):

Parto Dezfouli, Mahmoud. “AUTOMATED REAL-TIME MACHINE LEARNING FOR IOT FOR MANUFACTURING A CLOUD ARCHITECTURE AND API.” 2019. Doctoral Dissertation, Georgia Tech. Accessed February 26, 2020. http://hdl.handle.net/1853/62335.

MLA Handbook (7th Edition):

Parto Dezfouli, Mahmoud. “AUTOMATED REAL-TIME MACHINE LEARNING FOR IOT FOR MANUFACTURING A CLOUD ARCHITECTURE AND API.” 2019. Web. 26 Feb 2020.

Vancouver:

Parto Dezfouli M. AUTOMATED REAL-TIME MACHINE LEARNING FOR IOT FOR MANUFACTURING A CLOUD ARCHITECTURE AND API. [Internet] [Doctoral dissertation]. Georgia Tech; 2019. [cited 2020 Feb 26]. Available from: http://hdl.handle.net/1853/62335.

Council of Science Editors:

Parto Dezfouli M. AUTOMATED REAL-TIME MACHINE LEARNING FOR IOT FOR MANUFACTURING A CLOUD ARCHITECTURE AND API. [Doctoral Dissertation]. Georgia Tech; 2019. Available from: http://hdl.handle.net/1853/62335

16. Prevost, Eymard Antoine Marie Edudes. Detection of bearing defects with approximate bearing configuration.

Degree: MS, Mechanical Engineering, 2019, Georgia Tech

 Unscheduled maintenance in a production line due to breakdowns is highly detrimental. The ability to predict impending failure and anticipate it is a high value… (more)

Subjects/Keywords: Predictive maintenance; Bearing defect

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Prevost, E. A. M. E. (2019). Detection of bearing defects with approximate bearing configuration. (Masters Thesis). Georgia Tech. Retrieved from http://hdl.handle.net/1853/61766

Chicago Manual of Style (16th Edition):

Prevost, Eymard Antoine Marie Edudes. “Detection of bearing defects with approximate bearing configuration.” 2019. Masters Thesis, Georgia Tech. Accessed February 26, 2020. http://hdl.handle.net/1853/61766.

MLA Handbook (7th Edition):

Prevost, Eymard Antoine Marie Edudes. “Detection of bearing defects with approximate bearing configuration.” 2019. Web. 26 Feb 2020.

Vancouver:

Prevost EAME. Detection of bearing defects with approximate bearing configuration. [Internet] [Masters thesis]. Georgia Tech; 2019. [cited 2020 Feb 26]. Available from: http://hdl.handle.net/1853/61766.

Council of Science Editors:

Prevost EAME. Detection of bearing defects with approximate bearing configuration. [Masters Thesis]. Georgia Tech; 2019. Available from: http://hdl.handle.net/1853/61766

17. Miers, John Carter. A voxelized framework for simulating cutting tool and workpiece interaction.

Degree: MS, Mechanical Engineering, 2019, Georgia Tech

 In this manuscript, a voxel based model for the interaction between cutting teeth of an arbitrary end mill geometry and a workpiece is developed that… (more)

Subjects/Keywords: Machining; Voxel; Simulation; Milling force model

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Miers, J. C. (2019). A voxelized framework for simulating cutting tool and workpiece interaction. (Masters Thesis). Georgia Tech. Retrieved from http://hdl.handle.net/1853/61297

Chicago Manual of Style (16th Edition):

Miers, John Carter. “A voxelized framework for simulating cutting tool and workpiece interaction.” 2019. Masters Thesis, Georgia Tech. Accessed February 26, 2020. http://hdl.handle.net/1853/61297.

MLA Handbook (7th Edition):

Miers, John Carter. “A voxelized framework for simulating cutting tool and workpiece interaction.” 2019. Web. 26 Feb 2020.

Vancouver:

Miers JC. A voxelized framework for simulating cutting tool and workpiece interaction. [Internet] [Masters thesis]. Georgia Tech; 2019. [cited 2020 Feb 26]. Available from: http://hdl.handle.net/1853/61297.

Council of Science Editors:

Miers JC. A voxelized framework for simulating cutting tool and workpiece interaction. [Masters Thesis]. Georgia Tech; 2019. Available from: http://hdl.handle.net/1853/61297

18. Praniewicz, Maxwell R. Adaptive geometry transformation and repair methodology for hybrid manufacturing.

Degree: MS, Mechanical Engineering, 2018, Georgia Tech

 With hybrid manufacturing maturing into a commercial scale, industries are pushing to integrate and fully utilize this new technology in their production facilities. Using the… (more)

Subjects/Keywords: Hybrid manufacturing; Registration; Model adaptation; Adaptive machining

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Praniewicz, M. R. (2018). Adaptive geometry transformation and repair methodology for hybrid manufacturing. (Masters Thesis). Georgia Tech. Retrieved from http://hdl.handle.net/1853/60215

Chicago Manual of Style (16th Edition):

Praniewicz, Maxwell R. “Adaptive geometry transformation and repair methodology for hybrid manufacturing.” 2018. Masters Thesis, Georgia Tech. Accessed February 26, 2020. http://hdl.handle.net/1853/60215.

MLA Handbook (7th Edition):

Praniewicz, Maxwell R. “Adaptive geometry transformation and repair methodology for hybrid manufacturing.” 2018. Web. 26 Feb 2020.

Vancouver:

Praniewicz MR. Adaptive geometry transformation and repair methodology for hybrid manufacturing. [Internet] [Masters thesis]. Georgia Tech; 2018. [cited 2020 Feb 26]. Available from: http://hdl.handle.net/1853/60215.

Council of Science Editors:

Praniewicz MR. Adaptive geometry transformation and repair methodology for hybrid manufacturing. [Masters Thesis]. Georgia Tech; 2018. Available from: http://hdl.handle.net/1853/60215

19. Tritschler, Niklas Benedikt. Developing a device for automatic monitoring of rolling element bearing conditions.

Degree: MS, Mechanical Engineering, 2019, Georgia Tech

 In most instances, rotating machines have a unique vibration signature that relates to their health status. Therefore, vibration analysis is a powerful tool for predictive… (more)

Subjects/Keywords: Bearing defect analysis; Industry 4.0; Internet of things; Machine health monitoring

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Tritschler, N. B. (2019). Developing a device for automatic monitoring of rolling element bearing conditions. (Masters Thesis). Georgia Tech. Retrieved from http://hdl.handle.net/1853/61772

Chicago Manual of Style (16th Edition):

Tritschler, Niklas Benedikt. “Developing a device for automatic monitoring of rolling element bearing conditions.” 2019. Masters Thesis, Georgia Tech. Accessed February 26, 2020. http://hdl.handle.net/1853/61772.

MLA Handbook (7th Edition):

Tritschler, Niklas Benedikt. “Developing a device for automatic monitoring of rolling element bearing conditions.” 2019. Web. 26 Feb 2020.

Vancouver:

Tritschler NB. Developing a device for automatic monitoring of rolling element bearing conditions. [Internet] [Masters thesis]. Georgia Tech; 2019. [cited 2020 Feb 26]. Available from: http://hdl.handle.net/1853/61772.

Council of Science Editors:

Tritschler NB. Developing a device for automatic monitoring of rolling element bearing conditions. [Masters Thesis]. Georgia Tech; 2019. Available from: http://hdl.handle.net/1853/61772

20. Liu, Ryan. Scalable machining of micro-features for orthopedic and tribological applications.

Degree: MS, Mechanical Engineering, 2016, Georgia Tech

 Micro-scale surface textures have found profound application in various industrial sectors, including the biomedical and tribological communities. While numerous manufacturing methods are available for the… (more)

Subjects/Keywords: Machining; Texturing; Manufacturing; Precision

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Liu, R. (2016). Scalable machining of micro-features for orthopedic and tribological applications. (Masters Thesis). Georgia Tech. Retrieved from http://hdl.handle.net/1853/58191

Chicago Manual of Style (16th Edition):

Liu, Ryan. “Scalable machining of micro-features for orthopedic and tribological applications.” 2016. Masters Thesis, Georgia Tech. Accessed February 26, 2020. http://hdl.handle.net/1853/58191.

MLA Handbook (7th Edition):

Liu, Ryan. “Scalable machining of micro-features for orthopedic and tribological applications.” 2016. Web. 26 Feb 2020.

Vancouver:

Liu R. Scalable machining of micro-features for orthopedic and tribological applications. [Internet] [Masters thesis]. Georgia Tech; 2016. [cited 2020 Feb 26]. Available from: http://hdl.handle.net/1853/58191.

Council of Science Editors:

Liu R. Scalable machining of micro-features for orthopedic and tribological applications. [Masters Thesis]. Georgia Tech; 2016. Available from: http://hdl.handle.net/1853/58191

21. Lynn, David Roby. Enhancing awareness of additive and subtractive manufacturability with virtualized voxel-based simulations.

Degree: MS, Mechanical Engineering, 2017, Georgia Tech

 Manufacturing challenges are often introduced during the design process, and designers must be capable of designing components in such a way to minimize these challenges.… (more)

Subjects/Keywords: Computer-aided manufacturing; CNC; Design for manufacturability; Voxel; Virtualization

…MANUFACTURING For the purposes of this thesis, there are two courses at Georgia Tech (GT)… 

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Lynn, D. R. (2017). Enhancing awareness of additive and subtractive manufacturability with virtualized voxel-based simulations. (Masters Thesis). Georgia Tech. Retrieved from http://hdl.handle.net/1853/58255

Chicago Manual of Style (16th Edition):

Lynn, David Roby. “Enhancing awareness of additive and subtractive manufacturability with virtualized voxel-based simulations.” 2017. Masters Thesis, Georgia Tech. Accessed February 26, 2020. http://hdl.handle.net/1853/58255.

MLA Handbook (7th Edition):

Lynn, David Roby. “Enhancing awareness of additive and subtractive manufacturability with virtualized voxel-based simulations.” 2017. Web. 26 Feb 2020.

Vancouver:

Lynn DR. Enhancing awareness of additive and subtractive manufacturability with virtualized voxel-based simulations. [Internet] [Masters thesis]. Georgia Tech; 2017. [cited 2020 Feb 26]. Available from: http://hdl.handle.net/1853/58255.

Council of Science Editors:

Lynn DR. Enhancing awareness of additive and subtractive manufacturability with virtualized voxel-based simulations. [Masters Thesis]. Georgia Tech; 2017. Available from: http://hdl.handle.net/1853/58255

22. Kim, Myong Joon. RAPID DIGITIZATION AND NON-RIGID REGISTRATION OF AEROSPACE BLADE GEOMETRIES FOR HYBRID MANUFACTURING COMPONENT REPAIR.

Degree: MS, Mechanical Engineering, 2019, Georgia Tech

 Using hybrid manufacturing strategies provides an opportunity to automate the entire process of repairing airfoil components, which involves processes that include preparing for pre-weld airfoil,… (more)

Subjects/Keywords: Hybrid manufacturing; adaptive machining; rapid digitization; repair manufacturing; subtractive manufacturing; additive manufacturing; CAM; probing; non-rigid registration

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Kim, M. J. (2019). RAPID DIGITIZATION AND NON-RIGID REGISTRATION OF AEROSPACE BLADE GEOMETRIES FOR HYBRID MANUFACTURING COMPONENT REPAIR. (Masters Thesis). Georgia Tech. Retrieved from http://hdl.handle.net/1853/61197

Chicago Manual of Style (16th Edition):

Kim, Myong Joon. “RAPID DIGITIZATION AND NON-RIGID REGISTRATION OF AEROSPACE BLADE GEOMETRIES FOR HYBRID MANUFACTURING COMPONENT REPAIR.” 2019. Masters Thesis, Georgia Tech. Accessed February 26, 2020. http://hdl.handle.net/1853/61197.

MLA Handbook (7th Edition):

Kim, Myong Joon. “RAPID DIGITIZATION AND NON-RIGID REGISTRATION OF AEROSPACE BLADE GEOMETRIES FOR HYBRID MANUFACTURING COMPONENT REPAIR.” 2019. Web. 26 Feb 2020.

Vancouver:

Kim MJ. RAPID DIGITIZATION AND NON-RIGID REGISTRATION OF AEROSPACE BLADE GEOMETRIES FOR HYBRID MANUFACTURING COMPONENT REPAIR. [Internet] [Masters thesis]. Georgia Tech; 2019. [cited 2020 Feb 26]. Available from: http://hdl.handle.net/1853/61197.

Council of Science Editors:

Kim MJ. RAPID DIGITIZATION AND NON-RIGID REGISTRATION OF AEROSPACE BLADE GEOMETRIES FOR HYBRID MANUFACTURING COMPONENT REPAIR. [Masters Thesis]. Georgia Tech; 2019. Available from: http://hdl.handle.net/1853/61197

23. Woodin, Craig Thomas. Effects of dressing parameters on grinding wheel surface topography.

Degree: MS, Mechanical Engineering, 2014, Georgia Tech

 Grinding is a critical manufacturing process and is often the only alternative when producing precision components or when machining brittle materials such as ceramics. Characterizing… (more)

Subjects/Keywords: Grinding wheel; Single point dressing; Aluminum oxide; Seeded-gel; Stochastic model

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Woodin, C. T. (2014). Effects of dressing parameters on grinding wheel surface topography. (Masters Thesis). Georgia Tech. Retrieved from http://hdl.handle.net/1853/53104

Chicago Manual of Style (16th Edition):

Woodin, Craig Thomas. “Effects of dressing parameters on grinding wheel surface topography.” 2014. Masters Thesis, Georgia Tech. Accessed February 26, 2020. http://hdl.handle.net/1853/53104.

MLA Handbook (7th Edition):

Woodin, Craig Thomas. “Effects of dressing parameters on grinding wheel surface topography.” 2014. Web. 26 Feb 2020.

Vancouver:

Woodin CT. Effects of dressing parameters on grinding wheel surface topography. [Internet] [Masters thesis]. Georgia Tech; 2014. [cited 2020 Feb 26]. Available from: http://hdl.handle.net/1853/53104.

Council of Science Editors:

Woodin CT. Effects of dressing parameters on grinding wheel surface topography. [Masters Thesis]. Georgia Tech; 2014. Available from: http://hdl.handle.net/1853/53104

24. Locks, Stephanie Isabel. General Bayesian approach for manufacturing equipment diagnostics using sensor fusion.

Degree: MS, Mechanical Engineering, 2016, Georgia Tech

 Statistical analysis is used quite heavily in production operations. To use certain advanced statistical approaches such as Bayesian analysis, statistical models must be built. This… (more)

Subjects/Keywords: Manufacturing; Bayesian; Naive Bayesian; Digital manufacturing

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Locks, S. I. (2016). General Bayesian approach for manufacturing equipment diagnostics using sensor fusion. (Masters Thesis). Georgia Tech. Retrieved from http://hdl.handle.net/1853/55036

Chicago Manual of Style (16th Edition):

Locks, Stephanie Isabel. “General Bayesian approach for manufacturing equipment diagnostics using sensor fusion.” 2016. Masters Thesis, Georgia Tech. Accessed February 26, 2020. http://hdl.handle.net/1853/55036.

MLA Handbook (7th Edition):

Locks, Stephanie Isabel. “General Bayesian approach for manufacturing equipment diagnostics using sensor fusion.” 2016. Web. 26 Feb 2020.

Vancouver:

Locks SI. General Bayesian approach for manufacturing equipment diagnostics using sensor fusion. [Internet] [Masters thesis]. Georgia Tech; 2016. [cited 2020 Feb 26]. Available from: http://hdl.handle.net/1853/55036.

Council of Science Editors:

Locks SI. General Bayesian approach for manufacturing equipment diagnostics using sensor fusion. [Masters Thesis]. Georgia Tech; 2016. Available from: http://hdl.handle.net/1853/55036

25. Greer, Clayton M. Design of replacement structural components for fabrication using metal big area additive manufacturing.

Degree: MS, Mechanical Engineering, 2017, Georgia Tech

 Since the 1980s, additive manufacturing processes, commonly called 3D printing, have been used for prototyping applications due to low part strength. A new wire-feed metal… (more)

Subjects/Keywords: Additive manufacturing; Design for additive manufacturing

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Greer, C. M. (2017). Design of replacement structural components for fabrication using metal big area additive manufacturing. (Masters Thesis). Georgia Tech. Retrieved from http://hdl.handle.net/1853/58338

Chicago Manual of Style (16th Edition):

Greer, Clayton M. “Design of replacement structural components for fabrication using metal big area additive manufacturing.” 2017. Masters Thesis, Georgia Tech. Accessed February 26, 2020. http://hdl.handle.net/1853/58338.

MLA Handbook (7th Edition):

Greer, Clayton M. “Design of replacement structural components for fabrication using metal big area additive manufacturing.” 2017. Web. 26 Feb 2020.

Vancouver:

Greer CM. Design of replacement structural components for fabrication using metal big area additive manufacturing. [Internet] [Masters thesis]. Georgia Tech; 2017. [cited 2020 Feb 26]. Available from: http://hdl.handle.net/1853/58338.

Council of Science Editors:

Greer CM. Design of replacement structural components for fabrication using metal big area additive manufacturing. [Masters Thesis]. Georgia Tech; 2017. Available from: http://hdl.handle.net/1853/58338

26. Salmon, Ryan Alex. Development of a second generation liner-style hydraulic suppressor.

Degree: MS, Mechanical Engineering, 2015, Georgia Tech

 Noise in a fluid system can be treated with a prototypical liner-style suppressor, an expansion chamber which includes an internal annulus of syntactic foam. A… (more)

Subjects/Keywords: Hydraulics; Liner-style suppressors; Manufacturing; Noise control; Transmission loss

…in Figure 3, was developed at Georgia Tech by Nicholas Earnheart [3]. The… …the purpose of this work, termed GR9-625, was developed at Georgia Tech by Earnhart et al… …The mold, shown in Figure 8, was fabricated at Georgia Tech and sent to UTAS in Jacksonville… 

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Salmon, R. A. (2015). Development of a second generation liner-style hydraulic suppressor. (Masters Thesis). Georgia Tech. Retrieved from http://hdl.handle.net/1853/54479

Chicago Manual of Style (16th Edition):

Salmon, Ryan Alex. “Development of a second generation liner-style hydraulic suppressor.” 2015. Masters Thesis, Georgia Tech. Accessed February 26, 2020. http://hdl.handle.net/1853/54479.

MLA Handbook (7th Edition):

Salmon, Ryan Alex. “Development of a second generation liner-style hydraulic suppressor.” 2015. Web. 26 Feb 2020.

Vancouver:

Salmon RA. Development of a second generation liner-style hydraulic suppressor. [Internet] [Masters thesis]. Georgia Tech; 2015. [cited 2020 Feb 26]. Available from: http://hdl.handle.net/1853/54479.

Council of Science Editors:

Salmon RA. Development of a second generation liner-style hydraulic suppressor. [Masters Thesis]. Georgia Tech; 2015. Available from: http://hdl.handle.net/1853/54479

27. Parto Dezfouli, Mahmoud. A secure MTConnect compatible IoT platform for machine monitoring through integration of fog computing, cloud computing, and communication protocols.

Degree: MS, Mechanical Engineering, 2017, Georgia Tech

 Industry 4.0 aims at utilizing advancing computational frameworks such as Human-Computer Interaction and Machine Learning in traditional areas of manufacturing and production. Smart Manufacturing (SM)… (more)

Subjects/Keywords: Smart manufacturing; Internet of things; IoT; Industry 4.0; Cyber-physical systems; Fog computing; Cloud computing; Security; MTConenct; REST; HTTP; MQTT; AWS; OEE

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Parto Dezfouli, M. (2017). A secure MTConnect compatible IoT platform for machine monitoring through integration of fog computing, cloud computing, and communication protocols. (Masters Thesis). Georgia Tech. Retrieved from http://hdl.handle.net/1853/59283

Chicago Manual of Style (16th Edition):

Parto Dezfouli, Mahmoud. “A secure MTConnect compatible IoT platform for machine monitoring through integration of fog computing, cloud computing, and communication protocols.” 2017. Masters Thesis, Georgia Tech. Accessed February 26, 2020. http://hdl.handle.net/1853/59283.

MLA Handbook (7th Edition):

Parto Dezfouli, Mahmoud. “A secure MTConnect compatible IoT platform for machine monitoring through integration of fog computing, cloud computing, and communication protocols.” 2017. Web. 26 Feb 2020.

Vancouver:

Parto Dezfouli M. A secure MTConnect compatible IoT platform for machine monitoring through integration of fog computing, cloud computing, and communication protocols. [Internet] [Masters thesis]. Georgia Tech; 2017. [cited 2020 Feb 26]. Available from: http://hdl.handle.net/1853/59283.

Council of Science Editors:

Parto Dezfouli M. A secure MTConnect compatible IoT platform for machine monitoring through integration of fog computing, cloud computing, and communication protocols. [Masters Thesis]. Georgia Tech; 2017. Available from: http://hdl.handle.net/1853/59283

28. Song, Ruoyu. Towards automated guidance for helping novices design for sustainable additive manufacturing and CNC machining.

Degree: PhD, Mechanical Engineering, 2019, Georgia Tech

 Thanks to computer-aided design and computer-aided manufacturing software, novice engineering designers can engage in product design and production more easily, increasing opportunities for innovation. Despite… (more)

Subjects/Keywords: Design for manufacturing; Environmental impacts; Failure analysis; Additive manufacturing; Machining; Novices

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Song, R. (2019). Towards automated guidance for helping novices design for sustainable additive manufacturing and CNC machining. (Doctoral Dissertation). Georgia Tech. Retrieved from http://hdl.handle.net/1853/61731

Chicago Manual of Style (16th Edition):

Song, Ruoyu. “Towards automated guidance for helping novices design for sustainable additive manufacturing and CNC machining.” 2019. Doctoral Dissertation, Georgia Tech. Accessed February 26, 2020. http://hdl.handle.net/1853/61731.

MLA Handbook (7th Edition):

Song, Ruoyu. “Towards automated guidance for helping novices design for sustainable additive manufacturing and CNC machining.” 2019. Web. 26 Feb 2020.

Vancouver:

Song R. Towards automated guidance for helping novices design for sustainable additive manufacturing and CNC machining. [Internet] [Doctoral dissertation]. Georgia Tech; 2019. [cited 2020 Feb 26]. Available from: http://hdl.handle.net/1853/61731.

Council of Science Editors:

Song R. Towards automated guidance for helping novices design for sustainable additive manufacturing and CNC machining. [Doctoral Dissertation]. Georgia Tech; 2019. Available from: http://hdl.handle.net/1853/61731

29. Sati, Mukul. The average of a set of compatible curves and surfaces.

Degree: PhD, Computer Science, 2019, Georgia Tech

 The proposed thesis focuses on providing definitions, closed-form expressions and algorithmic solutions for computing averages of sets of shapes and associated standard deviation fields. By… (more)

Subjects/Keywords: Shape average; Shape statistics; Shape variability; Correspondence; Medial axis; Permutation invariance

…Jarek and Saldana, Christopher and Kurfess, Thomas. “Realization of the 5-Axis Machine Tool… 

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Sati, M. (2019). The average of a set of compatible curves and surfaces. (Doctoral Dissertation). Georgia Tech. Retrieved from http://hdl.handle.net/1853/61716

Chicago Manual of Style (16th Edition):

Sati, Mukul. “The average of a set of compatible curves and surfaces.” 2019. Doctoral Dissertation, Georgia Tech. Accessed February 26, 2020. http://hdl.handle.net/1853/61716.

MLA Handbook (7th Edition):

Sati, Mukul. “The average of a set of compatible curves and surfaces.” 2019. Web. 26 Feb 2020.

Vancouver:

Sati M. The average of a set of compatible curves and surfaces. [Internet] [Doctoral dissertation]. Georgia Tech; 2019. [cited 2020 Feb 26]. Available from: http://hdl.handle.net/1853/61716.

Council of Science Editors:

Sati M. The average of a set of compatible curves and surfaces. [Doctoral Dissertation]. Georgia Tech; 2019. Available from: http://hdl.handle.net/1853/61716

30. Chen, Aoyu. Machine tool spindle bearing diagnostics under operating conditions.

Degree: PhD, Mechanical Engineering, 2017, Georgia Tech

 Bearing diagnostics provide valuable information related to a bearing’s health and facilitate Condition Based Maintenance (CBM) for rotary machines. This is an effective method to… (more)

Subjects/Keywords: Bearing diagnostics; Machine tool; Dynamic modeling; Defect size estimation

Record DetailsSimilar RecordsGoogle PlusoneFacebookTwitterCiteULikeMendeleyreddit

APA · Chicago · MLA · Vancouver · CSE | Export to Zotero / EndNote / Reference Manager

APA (6th Edition):

Chen, A. (2017). Machine tool spindle bearing diagnostics under operating conditions. (Doctoral Dissertation). Georgia Tech. Retrieved from http://hdl.handle.net/1853/58260

Chicago Manual of Style (16th Edition):

Chen, Aoyu. “Machine tool spindle bearing diagnostics under operating conditions.” 2017. Doctoral Dissertation, Georgia Tech. Accessed February 26, 2020. http://hdl.handle.net/1853/58260.

MLA Handbook (7th Edition):

Chen, Aoyu. “Machine tool spindle bearing diagnostics under operating conditions.” 2017. Web. 26 Feb 2020.

Vancouver:

Chen A. Machine tool spindle bearing diagnostics under operating conditions. [Internet] [Doctoral dissertation]. Georgia Tech; 2017. [cited 2020 Feb 26]. Available from: http://hdl.handle.net/1853/58260.

Council of Science Editors:

Chen A. Machine tool spindle bearing diagnostics under operating conditions. [Doctoral Dissertation]. Georgia Tech; 2017. Available from: http://hdl.handle.net/1853/58260

[1] [2]

.